Keine Temperaturanzeige in FHEM

Joachim · 20 Dezember 2013, 12:14:01

fhem.log

Joachim · 20 Dezember 2013, 12:18:26

und mal bitte genaueres zu Deinem selbstgebauten 1-Wire Adapter

dan1180 · 20 Dezember 2013, 12:24:06

2013.12.20 12:03:04.800 1: Including fhem.cfg
2013.12.20 12:03:04.841 3: telnetPort: port 7072 opened
2013.12.20 12:03:04.847 3: WEB: port 8083 opened
2013.12.20 12:03:04.853 3: WEBphone: port 8084 opened
2013.12.20 12:03:04.862 3: WEBtablet: port 8085 opened
2013.12.20 12:03:04.883 3: Opening OWio1 device /dev/ttyUSB0
2013.12.20 12:03:04.895 3: Setting OWio1 baudrate to 9600
2013.12.20 12:03:04.910 3: OWio1 device opened
2013.12.20 12:03:04.911 1: OWX: Serial device /dev/ttyUSB0 defined
2013.12.20 12:03:05.064 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:05.640 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:06.215 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:06.795 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:07.371 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:07.946 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:08.522 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:09.097 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:09.673 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:10.257 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:10.833 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:11.409 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:11.984 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:12.560 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:13.135 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:13.711 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:14.286 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:14.861 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:15.443 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:16.018 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:16.593 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:17.169 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:17.744 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:18.320 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:18.895 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:19.471 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:20.046 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:20.626 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:21.201 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:21.777 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:22.352 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:22.928 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:23.503 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:24.079 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:24.662 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:25.237 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:25.816 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:26.393 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:26.970 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:27.546 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:28.125 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:28.700 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:29.276 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:29.851 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:30.430 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:31.012 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:31.587 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:32.173 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:32.748 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:33.324 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:33.899 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:34.475 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:35.051 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:35.626 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:36.208 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:36.783 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:37.359 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:37.934 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:38.511 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:39.086 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:39.662 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:40.237 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:40.812 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:41.393 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:41.969 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:42.544 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:43.120 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:43.695 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:44.273 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:44.848 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:45.424 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:45.999 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:46.580 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:47.160 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:47.737 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:48.312 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:48.889 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:49.465 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:50.041 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:50.616 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:51.192 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:51.771 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:52.346 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:52.922 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:53.497 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:54.073 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:54.652 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:55.229 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:55.804 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:56.380 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:56.959 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:57.534 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:58.110 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:58.692 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:59.268 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:03:59.843 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:04:00.419 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:04:00.994 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:04:01.570 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:04:02.145 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:04:02.647 1: OWX: 1-Wire bus OWio1: interface not detected, answer was 0x17 0x41 0xab 0x20 0xfc 
2013.12.20 12:04:02.656 1: Including ./log/fhem.save
2013.12.20 12:05:32.544 0: Server shutdown
2013.12.20 12:05:46.050 1: Including fhem.cfg
2013.12.20 12:05:47.576 3: telnetPort: port 7072 opened
2013.12.20 12:05:49.404 3: WEB: port 8083 opened
2013.12.20 12:05:49.425 3: WEBphone: port 8084 opened
2013.12.20 12:05:49.470 3: WEBtablet: port 8085 opened
2013.12.20 12:05:51.115 1: reload: Error:Modul 00_OWX deactivated:

Eigenbau nach http://www.kompf.de/weather/pionewire.html "Seriell zu 1-wire Adapter"

Bin im Moment aber dabei mir ein aktives Interface nach http://www.fhemwiki.de/wiki/Interfaces_f%C3%BCr_1-Wire zu bauen.

Joachim · 20 Dezember 2013, 12:31:24

Nimm mal diesen Anhang

Joachim · 20 Dezember 2013, 12:34:10

hattest Du eigentlich FHEM upgedatet?

dan1180 · 20 Dezember 2013, 13:01:03

File ist ausgetauscht, Raspberry rebootet, OWX noch immer nicht aufgetaucht.

Nun habe ich mir gedacht ich schmeiß meine Definition einfach nochmal aus der fhem.cfg raus und definier meinen OWX neu. Nach der Eingabe von

Code Auswählen

define OWio1 OWX /dev/ttyUSB0

kommt die Meldung

Code Auswählen


Unknown module OWX, choose one of ALL3076 ALL4000T ALL4027 BS CM11 CUL CUL_EM CUL_FHTTK CUL_HM CUL_HOERMANN CUL_IR CUL_MAX CUL_RFR CUL_TX CUL_WS CULflash Calendar DbLog ECMD ECMDDevice EGPM EGPM2LAN EIB EM EMEM EMGZ EMWZ ENIGMA2 ESA2000 EnOcean FBAHA FBDECT FB_CALLMONITOR FHEM2FHEM FHEMWEB FHT FHT8V FHZ FLOORPLAN FRM FRM_AD FRM_I2C FRM_IN FRM_LCD FRM_OUT FRM_PWM FRM_SERVO FS20 FileLog GDS HCS HMLAN HMS HMinfo HTTPSRV HUEBridge HUEDevice Heating_Control I2C_BMP180 IPCAM IPWE IT Itach_Relay JeeLink JsonList KM271 KS300 LGTV LIRC LISTENLIVE LUXTRONIK2 LightScene M232 M232Counter M232Voltage MAX MAXLAN MSG MSGFile MSGMail NetIO230B OREGON OWAD OWCOUNT OWDevice OWFS OWID OWLCD OWMULTI OWSWITCH OWServer OWTEMP OWTHERM PCA301 PID PIFACE POKEYS PRESENCE PachLog RFXCOM RFXMETER RFXX10REC RSS RandomTimer Revolt SCIVT SISPM SIS_PMS SML STV SVG SWAP SWAP_0000002200000003 SYSSTAT TCM THRESHOLD TRX TRX_ELSE TRX_LIGHT TRX_SECURITY TRX_WEATHER TUL TellStick Twilight USBWX USF1000 VIERA VantagePro2 WEBCOUNT WEBIO WEBIO_12DIGITAL WEBTHERM WOL WS2000 WS300 WS3600 Weather X10 XmlList YAMAHA_AVR ZWDongle ZWave at autocreate average backup dewpoint dummy eventTypes fheminfo holiday mailcheck notice notify openweathermap panStamp readingsGroup remotecontrol sequence speedtest structure telnet update watchdog weblink xxLG7000

Was soll das denn bitte jetzt???

Achso, ein update von fhem hab ich noch nicht gemacht. Hab nur die Version 5.5 aus der Anleitung installiert.

Joachim · 20 Dezember 2013, 13:07:06

Dann mal im WEB Interface oben im weißen Feld ein
update
eingeben und mit Return bestätigen. Warten bis das Update beendet ist,
dann FHEM stoppen, im Unterverzeichnis log die Dateien fhem.save und fhem-2013-12.log löschen, die 00_OWX.pm austauschen,
FHEM neu starten, und den ersten Teil des logs bis zur OWX-Fehlermeldung in Code tags hier einstellen.

Gruß Joachim

dan1180 · 20 Dezember 2013, 13:29:54

Hier das neue Log

Code Auswählen

2013.12.20 13:25:06.475 1: Including fhem.cfg
2013.12.20 13:25:07.141 3: telnetPort: port 7072 opened
2013.12.20 13:25:08.333 3: WEB: port 8083 opened
2013.12.20 13:25:08.339 3: WEBphone: port 8084 opened
2013.12.20 13:25:08.350 3: WEBtablet: port 8085 opened
2013.12.20 13:25:09.135 2: eventTypes: loaded 0 events from ./log/eventTypes.txt
2013.12.20 13:25:09.138 1: Including ./log/fhem.save
2013.12.20 13:25:09.178 2: SecurityCheck:  WEB,WEBtablet has no basicAuth attribute. telnetPort has no password/globalpassword attribute.  Restart fhem for a new check if the problem is fixed, or set the global attribute motd to none to supress this message. 
2013.12.20 13:25:09.197 0: Server started with 8 defined entities (version $Id: fhem.pl 4386 2013-12-15 17:09:05Z rudolfkoenig $, os linux, user fhem, pid 2683)
2013.12.20 13:26:34.459 1: reload: Error:Modul 00_OWX deactivated:

Beim Versuch OWX zu definieren kommt wieder der Fehler "Unknown module OWX..."

Joachim · 20 Dezember 2013, 14:07:47

hast Du daran gedacht, die Berechtigungen richtig zu setzen?
Wenn nicht, dann update force, und danach von Hand folgende Zeilen in der 00_OWX.pm ändern.
Zeile 100:
#-- Debugging 0,1,2,3
my $owx_debug=3;

Zeile 553
} elsif( ($res eq "\x17\x0A\x5B\x0F\x02") || ($res eq "\x00\x17\x0A\x5B\x0F\x02") || ($res eq "\x30\xf8\x00") || ($res eq "\x17\x41\xAB\x20\xFC")){

dann speichen, in der fhem.cfg folgenden Eintrag ändern:
attr global verbose 5

danach weiter, wie immer:
FHEM stoppen ...........

Gruß Joachim

dan1180 · 20 Dezember 2013, 16:02:18

Hallo Joachim,

da mein 00_OWX.pm leer war (

) hab ich deine wieder eingefügt. Bei der waren die Änderungen schon drin. Rest ausgeführt wie du geschrieben hast. fhem stoppen, reicht dafür "shutdown restart"? Hier mein neuer log:

Code Auswählen

2013.12.20 15:57:13.263 1: Including fhem.cfg
2013.12.20 15:57:13.269 5: Cmd: >attr global autoload_undefined_devices 1<
2013.12.20 15:57:13.293 5: Cmd: >attr global logfile ./log/fhem-%Y-%m.log<
2013.12.20 15:57:13.296 5: Cmd: >attr global modpath .<
2013.12.20 15:57:13.347 5: Loading ./FHEM/99_SUNRISE_EL.pm
2013.12.20 15:57:13.859 5: Loading ./FHEM/99_Utils.pm
2013.12.20 15:57:13.943 5: Cmd: >attr global motd SecurityCheck:

WEB,WEBtablet has no basicAuth attribute.
telnetPort has no password/globalpassword attribute.

Restart fhem for a new check if the problem is fixed,
or set the global attribute motd to none to supress this message.
<
2013.12.20 15:57:13.945 5: Cmd: >attr global mseclog 1<
2013.12.20 15:57:13.948 5: Cmd: >attr global sendStatistics manually<
2013.12.20 15:57:13.950 5: Cmd: >attr global statefile ./log/fhem.save<
2013.12.20 15:57:13.952 5: Cmd: >attr global updateInBackground 1<
2013.12.20 15:57:13.954 5: Cmd: >attr global userattr devStateIcon devStateStyle icon sortby webCmd<
2013.12.20 15:57:13.956 5: Cmd: >attr global verbose 5<
2013.12.20 15:57:13.959 5: Cmd: >define telnetPort telnet 7072 global<
2013.12.20 15:57:13.961 5: Loading ./FHEM/98_telnet.pm
2013.12.20 15:57:14.076 3: telnetPort: port 7072 opened
2013.12.20 15:57:14.077 5: Cmd: >define WEB FHEMWEB 8083 global<
2013.12.20 15:57:14.079 5: Loading ./FHEM/01_FHEMWEB.pm
2013.12.20 15:57:14.771 3: WEB: port 8083 opened
2013.12.20 15:57:14.773 5: Cmd: >define WEBphone FHEMWEB 8084 global<
2013.12.20 15:57:14.777 3: WEBphone: port 8084 opened
2013.12.20 15:57:14.779 5: Cmd: >attr WEBphone basicAuth RmFtRG9lYmxlcjpVbGxpMjAwOQ==<
2013.12.20 15:57:14.781 5: Cmd: >attr WEBphone stylesheetPrefix smallscreen<
2013.12.20 15:57:14.784 5: Cmd: >define WEBtablet FHEMWEB 8085 global<
2013.12.20 15:57:14.788 3: WEBtablet: port 8085 opened
2013.12.20 15:57:14.790 5: Cmd: >attr WEBtablet stylesheetPrefix touchpad<
2013.12.20 15:57:14.793 5: Cmd: >define Logfile FileLog ./log/fhem-%Y-%m.log fakelog<
2013.12.20 15:57:14.794 5: Loading ./FHEM/92_FileLog.pm
2013.12.20 15:57:15.031 5: Cmd: >define autocreate autocreate<
2013.12.20 15:57:15.033 5: Loading ./FHEM/98_autocreate.pm
2013.12.20 15:57:15.120 5: Cmd: >attr autocreate filelog ./log/%NAME-%Y.log<
2013.12.20 15:57:15.123 5: Cmd: >define eventTypes eventTypes ./log/eventTypes.txt<
2013.12.20 15:57:15.124 5: Loading ./FHEM/91_eventTypes.pm
2013.12.20 15:57:15.161 2: eventTypes: loaded 0 events from ./log/eventTypes.txt
2013.12.20 15:57:15.164 1: Including ./log/fhem.save
2013.12.20 15:57:15.165 5: Cmd: >setstate Logfile active<
2013.12.20 15:57:15.168 5: Cmd: >setstate autocreate active<
2013.12.20 15:57:15.169 5: Cmd: >setstate eventTypes active<
2013.12.20 15:57:15.172 5: Cmd: >setstate global <no definition><
2013.12.20 15:57:15.174 5: Interface "interface": readings "", getters "", setters ""
2013.12.20 15:57:15.175 5: Interface "switch": readings "onoff", getters "onoff", setters ""
2013.12.20 15:57:15.176 5: Interface "switch_active": readings "onoff", getters "onoff", setters ""
2013.12.20 15:57:15.177 5: Interface "switch_passive": readings "onoff", getters "onoff", setters "on:off"
2013.12.20 15:57:15.178 5: Interface "dimmer": readings "onoff:level", getters "onoff:level", setters "on:off:dimto:dimup:dimdown"
2013.12.20 15:57:15.179 5: Interface "temperature": readings "temperature", getters "temperature", setters ""
2013.12.20 15:57:15.180 5: Interface "humidity": readings "humidity", getters "humidity", setters ""
2013.12.20 15:57:15.181 5: Interface "wind": readings "wind", getters "wind", setters ""
2013.12.20 15:57:15.182 5: Interface "power": readings "power:maxPower:energy", getters "power:maxPower:energy", setters ""
2013.12.20 15:57:15.184 5: Triggering global (1 changes)
2013.12.20 15:57:15.185 5: Notify loop for global INITIALIZED
2013.12.20 15:57:15.191 2: SecurityCheck:  WEB,WEBtablet has no basicAuth attribute. telnetPort has no password/globalpassword attribute.  Restart fhem for a new check if the problem is fixed, or set the global attribute motd to none to supress this message. 
2013.12.20 15:57:15.197 0: Server started with 8 defined entities (version $Id: fhem.pl 4386 2013-12-15 17:09:05Z rudolfkoenig $, os linux, user fhem, pid 2815)
2013.12.20 16:00:11.181 4: Connection accepted from FHEMWEB:192.168.2.103:54908
2013.12.20 16:00:12.212 4: HTTP FHEMWEB:192.168.2.103:54908 GET /fhem
2013.12.20 16:00:12.251 4: /fhem / RL:947 / text/html; charset=UTF-8 / Content-Encoding: gzip
 / 
2013.12.20 16:00:12.509 4: HTTP FHEMWEB:192.168.2.103:54908 GET /fhem?room=all&XHR=1&inform=1×tamp=1387551612555
2013.12.20 16:00:15.378 4: Connection closed for FHEMWEB:192.168.2.103:54908
2013.12.20 16:00:15.382 4: Connection accepted from FHEMWEB:192.168.2.103:54909
2013.12.20 16:00:15.385 4: HTTP FHEMWEB:192.168.2.103:54909 GET /fhem/FileLog_logWrapper?dev=Logfile&type=text&file=fhem-2013-12.log

dan1180 · 20 Dezember 2013, 16:07:56

ES TUT!!!

Es wird mir zwar im Moment nur eine Temperatur angezeigt aber der OWX steht auf Active!

Was hab ich jetzt gemacht? Würd gerne verstehen was ich bei einem evtl. neu aufsetzen des RasPi tun/beachten muss (und mir das in meine mittlerweile buchdicke Doku schreiben)

Auf jeden Fall VIELEN VIELEN DANK für die Hilfe und die dafür notwendige Geduld!

dan1180 · 20 Dezember 2013, 16:26:28

Nachtrag:

Der zweite Sensor tut nun auch. Musste ihn allerdings von Hand definieren. Temperaturen werden ausgegeben.

Joachim · 20 Dezember 2013, 16:35:53

Moin dan1180,

das Modul, was für die Kommunikation mit Deinem Selbstbauadapter zuständig ist, hat Deinen Adapter nicht als 1-Wire-Adapter erkannt

Code Auswählen

2013.12.20 12:03:05.064 1: OWX: 1-Wire bus OWio1: interface not found, answer was 0x17 0x41 0xab 0x20 0xfc
es hätte eine der folgenden Antworten erwartet:

Code Auswählen

 
0x17 0x0A 0x5B 0x0F 0x02 oder 0x00 0x17 0x0A 0x5B 0x0F 0x02 oder 0x30 0xf8 0x00

mit dieser Zeile:

Code Auswählen

 } elsif( ($res eq "\x17\x0A\x5B\x0F\x02") || ($res eq "\x00\x17\x0A\x5B\x0F\x02") || ($res eq "\x30\xf8\x00") || ($res eq "\x17\x41\xAB\x20\xFC")){

haben wir ihn jetzt auch mit Deinem Modul bekanntgemacht.

Viel Spass beim weitern Testen.

Gruß Joachim

PS: Zeile 100 wieder auf

Code Auswählen

my $owx_debug=0;
setzen

PPS: Beitrag als gelöst markieren

dan1180 · 20 Dezember 2013, 16:42:25

Das heißt wenn ich das Ding mal komplett neu aufsetze, muss ich nur die Zeile 553 editieren und es müsste tun?

Kann ich mich so jetzt auch nochmal an OWFS wagen?

Noch einmal vielen Dank!

Wünsch dir schöne und erholsame (von nervigen Newbes befreite

) Feiertage und einen guten Rutsch. Wir werden uns hier sicher nochmal übern Weg laufen...

Joachim · 20 Dezember 2013, 16:57:53

ZitatDas heißt wenn ich das Ding mal komplett neu aufsetze, muss ich nur die Zeile 553 editieren und es müsste tun?

Im Prinzip ja, aber vorher ins fhem.log sehen, wie wir es hier auch gemacht haben, dann Fehlermeldung analysieren und danach handeln.

ZitatKann ich mich so jetzt auch nochmal an OWFS wagen?

warum nicht, aber vorher diese Installation sichern.

ZitatWünsch dir schöne und erholsame (von nervigen Newbes befreite ) Feiertage und einen guten Rutsch. Wir werden uns hier sicher nochmal übern Weg laufen...

Danke, und "Ich hab's befürchtet"

Denke daran, diesen Tread als gelöst zu kennzeichnen.

Gruß Joachim