Decoding of unsupported ARC codes (Lighting4)

Begonnen von oliv06, 05 Januar 2013, 00:00:41

Vorheriges Thema - Nächstes Thema

Willi

Bert from RFXCOM gave me the answer.

I have to set the switch to S instead to R of the WD18. Now it shows up as a DS10A dor switch and everything works as expected. On Alarm it shows Opened and after alarm is show closed.

-- Willi

FHEM@Q600(debian) mit DS9490R (1Wire) | FHEM@Sheevaplug(debian) mit RFXCOM-Receiver(80002), CULv3 & USB-WDE1 | FHEM@odroid mit CULv2 & RFXtrx433

oliv06

Zitat von: Willi schrieb am Sa, 13 April 2013 18:40Bert from RFXCOM gave me the answer.

I have to set the switch to S instead to R of the WD18. Now it shows up as a DS10A dor switch and everything works as expected. On Alarm it shows Opened and after alarm is show closed.

-- Willi

Thank you. I changed the switch to S.

Willi

Zitat von: oliv06 schrieb am Sa, 13 April 2013 23:37Thank you. I changed the switch to S.

I have found out that battery works now ok, but some other things (like tamper) works different.

I am currently testing a new dev_type WD18 which should give the correct results.
I will let you know when I put it into SVN. The new define for it will look like:

define TRX_Wassermelder1 TRX_SECURITY WD18 16fc water

FHEM@Q600(debian) mit DS9490R (1Wire) | FHEM@Sheevaplug(debian) mit RFXCOM-Receiver(80002), CULv3 & USB-WDE1 | FHEM@odroid mit CULv2 & RFXtrx433