Autor Thema: Im HM-CC-RT-DN tauchen nur Kanäle 0 und 4 auf  (Gelesen 178 mal)

Offline doc.

  • New Member
  • *
  • Beiträge: 16
Im HM-CC-RT-DN tauchen nur Kanäle 0 und 4 auf
« am: 16 Juni 2019, 11:36:46 »
Hallo zusammen,

vielleicht kann mir jemand helfen - ich hätte gerne den Kanal 3 zum peeren des Fensterkontaktes in FHEM. Allerdings sehe ich in meinem Device nur die Kanäle 0 und 4:

CHN OEQ2094581:0 HM-CC-RT-DN-KiZi2:0
  DPT {b} BidCos-RF.OEQ2094581:0.UNREACH = false [RE]
  DPT {b} BidCos-RF.OEQ2094581:0.STICKY_UNREACH = false [RWE]
  DPT {b} BidCos-RF.OEQ2094581:0.CONFIG_PENDING = false [RE]
  DPT {b} BidCos-RF.OEQ2094581:0.LOWBAT = false [RE]
  DPT {n} BidCos-RF.OEQ2094581:0.RSSI_DEVICE = 1 [RE]
  DPT {n} BidCos-RF.OEQ2094581:0.RSSI_PEER = 199 [RE]
  DPT {b} BidCos-RF.OEQ2094581:0.INHIBIT = false [RWE]
  DPT {b} BidCos-RF.OEQ2094581:0.DEVICE_IN_BOOTLOADER = false [RE]
  DPT {b} BidCos-RF.OEQ2094581:0.UPDATE_PENDING = false [RE]
  DPT {n} BidCos-RF.OEQ2094581:0.AES_KEY = 0 [R]
CHN OEQ2094581:4 HM-CC-RT-DN OEQ2094581:4
  DPT {i} BidCos-RF.OEQ2094581:4.CONTROL_MODE = 1 [RE]
  DPT {i} BidCos-RF.OEQ2094581:4.FAULT_REPORTING = 0 [RE]
  DPT {f} BidCos-RF.OEQ2094581:4.BATTERY_STATE = 2.900000 [RE]
  DPT {i} BidCos-RF.OEQ2094581:4.VALVE_STATE = 99 [RE]
  DPT {i} BidCos-RF.OEQ2094581:4.BOOST_STATE = 0 [RE]
  DPT {f} BidCos-RF.OEQ2094581:4.ACTUAL_TEMPERATURE = 22.500000 [RE]
  DPT {f} BidCos-RF.OEQ2094581:4.SET_TEMPERATURE = 30.500000 [RWE]
  DPT {b} BidCos-RF.OEQ2094581:4.AUTO_MODE =  [W]
  DPT {f} BidCos-RF.OEQ2094581:4.MANU_MODE =  [W]
  DPT {b} BidCos-RF.OEQ2094581:4.BOOST_MODE =  [W]
  DPT {b} BidCos-RF.OEQ2094581:4.COMFORT_MODE =  [W]
  DPT {b} BidCos-RF.OEQ2094581:4.LOWERING_MODE =  [W]
  DPT {s} BidCos-RF.OEQ2094581:4.PARTY_MODE_SUBMIT =  [W]
  DPT {f} BidCos-RF.OEQ2094581:4.PARTY_TEMPERATURE = 5.000000 [RW]
  DPT {i} BidCos-RF.OEQ2094581:4.PARTY_START_TIME = 0 [RW]
  DPT {i} BidCos-RF.OEQ2094581:4.PARTY_START_DAY = 1 [RW]
  DPT {i} BidCos-RF.OEQ2094581:4.PARTY_START_MONTH = 1 [RW]
  DPT {i} BidCos-RF.OEQ2094581:4.PARTY_START_YEAR = 0 [RW]
  DPT {i} BidCos-RF.OEQ2094581:4.PARTY_STOP_TIME = 0 [RW]
  DPT {i} BidCos-RF.OEQ2094581:4.PARTY_STOP_DAY = 1 [RW]
  DPT {i} BidCos-RF.OEQ2094581:4.PARTY_STOP_MONTH = 1 [RW]
  DPT {i} BidCos-RF.OEQ2094581:4.PARTY_STOP_YEAR = 0 [RW]

Hat jemand eine Ahnung was ich falsch mache?

Vielen Dank im Voraus!