Renkforce FT007TP Thermosensor an sduino anlernen

Begonnen von Flipper92, 30 Juli 2019, 18:46:35

Vorheriges Thema - Nächstes Thema

Flipper92

Hallo zusammen,

Ich hab bei mir 4x Renkforce FT007TH Thermo-/Hygrosensor die einwandfrei in FHEM funktionieren (als SD_WS_58_TH_{1-4}).

Nun hab ich noch zwei Renkforce FT007TP Thermosensoren die ich gerne mit einbinden möchte.
Leider reagiert hier der Autocreate leider nicht so schön, wie bei den FT007TH's.

Wie kann ich die Thermosensoren am besten anbinden?

List von sduino (Vielleicht hab ich ja nur was falsch)
Internals:
   Clients    :IT:CUL_TCM97001:SD_RSL:OREGON:CUL_TX:SD_AS:Hideki:SD_WS07:SD_WS09: :SD_WS:RFXX10REC:Dooya:SOMFY:SD_BELL:SD_UT:SD_WS_Maverick:FLAMINGO:CUL_WS:Revolt: :FS10:CUL_FHTTK:Siro:FHT:FS20:CUL_EM:Fernotron:SIGNALduino_un:
   DEF        /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0@57600
   DMSG       W58#45A724A839C50
   DevState   initialized
   DeviceName /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0@57600
   FD         7
   FUUID      5d0e8c2a-f33f-39e8-3935-4048067fb6c5a03b
   FVERSION   00_SIGNALduino.pm:v3.3.4-s18693/2019-02-22
   IDsNoDispatch 2,72.1,82
   ITClock    250
   LASTDMSG   W58#45A724A839C50
   MSGCNT     198457
   NAME       sduino
   NR         16
   NR_CMD_LAST_H 3
   PARTIAL   
   RAWMSG     MC;LL=-1042;LH=919;SL=-546;SH=447;D=002BA58DB57C63AF0015D2C6DABE31D7800AE9636FFD5D2C6DABE31D7800AE9636D5F18EBC00574B1B6AF8C75E;C=487;L=359;
   STATE      opened
   TIME       1564505122
   TYPE       SIGNALduino
   sendworking 0
   unknownmessages 2019-07-30 17:01:35-MS;P0=-212;P1=512;P2=-3893;P3=-1934;P4=-6786;P5=1736;D=1450131213121313121313131313121313131313131213131313121213121313121312121213;CP=1;SP=4;#2019-07-30 17:01:35-MU;P0=312;P1=-4005;P2=501;P3=-1940;D=0123212321232321232323232321232323232323212323232321212321232321232121212321;CP=2;#2019-07-30 17:01:35-MU;P0=-436;P1=510;P2=-1933;P3=-3640;D=0121312121212121312121212121213121212121313;CP=1;#2019-07-30 17:01:47-MC;LL=-1085;LH=858;SL=-582;SH=398;D=82BA12EDFEC0B0F0;C=487;L=61;#2019-07-30 17:01:47-MC;LL=-1082;LH=871;SL=-578;SH=418;D=00574;C=491;L=19;#2019-07-30 17:01:47-MC;LL=-1082;LH=871;SL=-578;SH=418;D=12EDFEC0B0F0015D0976FF605878;C=491;L=109;#2019-07-30 17:01:54-MU;P0=-926;P1=489;P2=-1906;P5=-568;P6=2129;P7=1496;D=701210101000101210101721210101560121212651212126;CP=1;#2019-07-30 17:01:57-MU;P0=419;P1=-535;P3=-1050;P4=932;P5=-385;P6=212;D=01030101014103450103014103010143014343410305050101410101010103456501010101430101430101430101410341034301;CP=0;#2019-07-30 17:01:57-MU;P0=-504;P1=927;P2=427;P3=-1048;P5=628;P7=1468;D=01020232020201050202020231320207013202010;CP=2;#2019-07-30 17:02:21-MC;LL=-1028;LH=932;SL=-552;SH=416;D=AFBD76E7FD6CBB28;C=487;L=62;#2019-07-30 17:02:40-MC;LL=-1026;LH=938;SL=-507;SH=476;D=A3C8CED4F7F7DE256C;C=491;L=70;#2019-07-30 17:02:40-MC;LL=-1034;LH=919;SL=-504;SH=442;D=919DA96FEE;C=483;L=39;#2019-07-30 17:02:42-MU;P0=-434;P1=-332;P2=422;P3=-564;P4=-1044;D=01012323240404232304032423040404230324040403240323242323230323232423232304040423232303232323232323232323240404232304032423040404230324040403240323242323230323232423232304040423232303232323232323232323240404232304032423040404230324040403240323242323230323;CP=2;O;#2019-07-30 17:02:44-MU;P0=-216;P1=2796;P2=-602;P3=381;P4=-1083;P5=877;P6=256;D=01232323232323232323454543232545232323452345432325432543232323232323254325232323232345432523232343232325232323232326262323234545432325452323234523454323254325432323232323232543252323232323454325232323432323252323232323232323232345454323254523232345234543;CP=3;O;#2019-07-30 17:02:44-MC;LL=-1086;LH=871;SL=-595;SH=406;D=07FB02C3C;C=492;L=34;#2019-07-30 17:02:45-MS;P0=-752;P1=498;P2=-1950;P4=-9212;D=14121012101212101212121212101212121212121012121212101010101212101210101012;CP=1;SP=4;O;#2019-07-30 17:02:45-MU;P0=-3896;P1=518;P2=-1953;P3=-9212;P4=-1424;D=012121212101010101212101210101012131210121012121012121212121012121212121210121212121010101014;CP=1;#2019-07-30 17:02:58-MU;P0=-601;P1=2410;P2=224;P4=394;P5=-1051;P6=895;P7=1524;D=5404065657040656045404010604045406510204;CP=4;#2019-07-30 17:02:58-MU;P0=2482;P1=-226;P2=388;P3=-1066;P4=823;P5=-617;P7=-470;D=0123452521472305252525452525270525252525;CP=2;#2019-07-30 17:03:14-MC;LL=-1017;LH=920;SL=-538;SH=452;D=AFBD62E7FD6D5BCC;C=487;L=62;#2019-07-30 17:03:19-MU;P0=-404;P1=490;P2=-592;P3=-1948;P4=-3902;P5=136;P6=-1176;P7=732;D=67012131473141313141312561313131413131313131314131313131414141413131414131313131;CP=1;#2019-07-30 17:03:20-MU;P0=128;P1=222;P2=-980;P3=558;P4=-1941;P5=-3895;P6=-9208;P7=-452;D=123434343434353434343435353535343435353434343436370;CP=3;#2019-07-30 17:03:20-MU;P0=517;P1=-792;P2=-3883;P3=-1936;D=010203020303020303030303020303030303030203030303020202020303020201;CP=0;#2019-07-30 17:03:27-MC;LL=-1055;LH=897;SL=-558;SH=415;D=0F87278;C=487;L=25;#2019-07-30 17:03:51-MC;LL=-1075;LH=951;SL=-599;SH=433;D=F0014;C=509;L=18;
   version    V 3.3.1-dev SIGNALduino - compiled at Jan  3 2017 23:59:32
   versionmodul v3.3.3
   DoubleMsgIDs:
   MatchList:
     10:SD_WS07 ^P7#[A-Fa-f0-9]{6}F[A-Fa-f0-9]{2}(#R[A-F0-9][A-F0-9]){0,1}$
     11:SD_WS09 ^P9#F[A-Fa-f0-9]+
     12:SD_WS   ^W\d+x{0,1}#.*
     13:RFXX10REC ^(20|29)[A-Fa-f0-9]+
     14:Dooya   ^P16#[A-Fa-f0-9]+
     15:SOMFY   ^Ys[0-9A-F]+
     16:SD_WS_Maverick ^P47#[A-Fa-f0-9]+
     17:SD_UT   ^P(?:14|29|30|34|46|69|76|81|83|86|90|91|91.1|92)#.*
     18:FLAMINGO ^P13\.?1?#[A-Fa-f0-9]+
     19:CUL_WS  ^K[A-Fa-f0-9]{5,}
     1:IT       ^i......
     20:Revolt  ^r[A-Fa-f0-9]{22}
     21:FS10    ^P61#[A-F0-9]+
     22:Siro    ^P72#[A-Fa-f0-9]+
     23:FHT     ^81..(04|09|0d)..(0909a001|83098301|c409c401)..
     24:FS20    ^81..(04|0c)..0101a001
     25:CUL_EM  ^E0.................
     26:Fernotron ^P82#.*
     27:SD_BELL ^P(?:15|32|41|42|57|79)#.*
     2:CUL_TCM97001 ^s[A-Fa-f0-9]+
     3:SD_RSL   ^P1#[A-Fa-f0-9]{8}
     4:OREGON   ^(3[8-9A-F]|[4-6][0-9A-F]|7[0-8]).*
     5:CUL_TX   ^TX..........
     6:SD_AS    ^P2#[A-Fa-f0-9]{7,8}
     7:Hideki   ^P12#75[A-F0-9]+
     9:CUL_FHTTK ^T[A-F0-9]{8}
     X:SIGNALduino_un ^[u]\d+#.*
   QUEUE:
   READINGS:
     2019-07-12 12:08:48   state           opened
     2019-07-12 12:08:48   version         V 3.3.1-dev SIGNALduino - compiled at Jan  3 2017 23:59:32
   XMIT_TIME:
     1564499419
     1564502545
     1564502545
   getcmd:
   keepalive:
     ok         1
     retry      0
   mcIdList:
     10
     11
     12
     18
     43
     47
     52
     57
     58
   msIdList:
     0
     0.1
     0.2
     0.3
     0.4
     1
     3
     3.1
     4
     6
     7
     13
     13.2
     14
     15
     17
     23
     25
     33
     35
     41
     51
     55
     65
     90
     91.1
   muIdList:
     8
     9
     13.1
     16
     17.1
     19
     21
     22
     24
     26
     27
     28
     29
     30
     31
     32
     34
     36
     37
     38
     39
     40
     42
     44
     44.1
     45
     46
     48
     49
     50
     56
     59
     60
     61
     62
     64
     66
     67
     69
     70
     71
     72
     74
     76
     79
     80
     81
     83
     84
     85
     86
     89
     91
     92
Attributes:
   verbose    4

Mit freundlichen Grüßen,
Dominik

HomeAuto_User

#1
Hallo,
kannst du bitte von den Sensoren mal ein paar Nachrichten zur Verfügung stellen um das ganze zu rekonstruieren? (Beim Empfang auf verbose 4 stellen und wenn möglich nah am sduino den Sensor haben)

Liebe Grüße Marco

Gesendet von iPhone mit Tapatalk Pro
"Developer" heißt nicht, das man alles wissen kann!
- FHEM v5.9 | Rasberry PI 3
- radino CC1101 433Mhz (SIGNALduino)| - radino CC1101 868Mhz (CUL) | nano 433Mhz (SIGNALduino) - Sensoren: purer Dschungel querbeet

Flipper92

Hallo Marco

Ich hab hier eine Minute ausgelesen.
In dieser Zeit hab ich bei beiden Sensoren mal die Batterie eingelegt und so das die Sensoren zum senden gezwungen wurden.
(CH5: 26,4; CH6: 26,6)

2019.07.31 17:58:02 4: sduino/msg READ: MU;P0=2872;P1=-208;P2=354;P3=-654;P4=-360;P5=-1120;P6=842;P7=176;D=370123232323232323242565652323656323232563256523236523236325236323252323236323232565232363256523;CP=2;
2019.07.31 17:58:02 4: sduino: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2019.07.31 17:58:02 4: sduino: Fingerprint for MU Protocol id 34 -> QUIGG_GT-7000 matches, trying to demodulate
2019.07.31 17:58:02 4: sduino: Fingerprint for MU Protocol id 40 -> Romotec  matches, trying to demodulate
2019.07.31 17:58:02 4: sduino: Fingerprint for MU Protocol id 61 -> FS10 matches, trying to demodulate
2019.07.31 17:58:02 4: sduino: Fingerprint for MU Protocol id 70 -> FHT80TF matches, trying to demodulate
2019.07.31 17:58:02 4: sduino: Fingerprint for MU Protocol id 74 -> FS20 matches, trying to demodulate
2019.07.31 17:58:02 4: sduino: Fingerprint for MU Protocol id 80 -> EM1000WZ matches, trying to demodulate
2019.07.31 17:58:02 4: sduino/msg READ: MC;LL=-1080;LH=877;SL=-589;SH=406;D=15D097731E172F800AE84BB98F0B97C;C=491;L=122;
2019.07.31 17:58:02 4: sduino: Found manchester Protocol id 10 clock 491 -> Oregon Scientific v2|v3
2019.07.31 17:58:02 4: sduino: Found manchester Protocol id 12 clock 491 -> Hideki
2019.07.31 17:58:02 4: sduino: receive Hideki protocol not inverted
2019.07.31 17:58:02 4: sduino: Hideki protocol converted to hex: 759077E3D0F400D442DD8C43D303 with 121 bits, messagestart 3
2019.07.31 17:58:02 4: sduino Hideki_Parse: incomming P12#759077E3D0F400D442DD8C43D303
2019.07.31 17:58:02 4: sduino Hideki_crc: rawdata=759077E3D0F400D442DD8C43D303 to short, count=12 data length=14
2019.07.31 17:58:02 4: sduino: Found manchester Protocol id 52 clock 491 -> Oregon Scientific PIR
2019.07.31 17:58:02 4: sduino: Found manchester Protocol id 58 clock 491 -> TFA 30.3208.0
2019.07.31 17:58:02 4: sduino: TFA 30.3208.0 preamble_pos = 70
2019.07.31 17:58:02 4: sduino: TFA message start(1)=70 end=122 with length=52
2019.07.31 17:58:02 4: sduino: TFA message part(1)=45ED119C3D1A0
2019.07.31 17:58:10 4: sduino/msg READ: MU;P0=-32001;P1=-647;P2=-553;P3=427;P4=-1026;P6=324;D=01232323232323232323234141432321234123432321232341414143212341432123432323212323234143232141432323212323232323232323232341414323212341234323212323414141432123414321234323232123232341432321414623232123232323232323232323414143232123412343232123234141414321;CP=3;O;
2019.07.31 17:58:10 4: sduino: Fingerprint for MU Protocol id 61 -> FS10 matches, trying to demodulate
2019.07.31 17:58:10 4: sduino: Fingerprint for MU Protocol id 70 -> FHT80TF matches, trying to demodulate
2019.07.31 17:58:10 4: sduino: Fingerprint for MU Protocol id 74 -> FS20 matches, trying to demodulate
2019.07.31 17:58:10 4: sduino: Fingerprint for MU Protocol id 80 -> EM1000WZ matches, trying to demodulate
2019.07.31 17:58:11 4: sduino/msg READ: MC;LL=-1029;LH=920;SL=-528;SH=475;D=2CF0BAF;C=491;L=28;
2019.07.31 17:58:12 4: sduino/msg READ: MC;LL=-1046;LH=910;SL=-541;SH=457;D=00574D5953FD177E002BA6ACA9FE8BBF0015D35654FFABA6ACA9FE8BBF0015D35654FF45DF800AE9AB2A7FA2EFC;C=488;L=362;
2019.07.31 17:58:12 4: sduino: Found manchester Protocol id 10 clock 488 -> Oregon Scientific v2|v3
2019.07.31 17:58:12 4: sduino: Found manchester Protocol id 12 clock 488 -> Hideki
2019.07.31 17:58:12 4: sduino: Found manchester Protocol id 52 clock 488 -> Oregon Scientific PIR
2019.07.31 17:58:12 4: sduino: Found manchester Protocol id 58 clock 488 -> TFA 30.3208.0
2019.07.31 17:58:12 4: sduino: TFA 30.3208.0 preamble_pos = 76
2019.07.31 17:58:12 4: sduino: TFA message start(1)=76 end=128 with length=52
2019.07.31 17:58:12 4: sduino: TFA message part(1)=4595356017440
2019.07.31 17:58:12 4: sduino: TFA message start(2)=141 end=232 with length=91
2019.07.31 17:58:12 4: sduino: TFA message part(2): message with length=91 is to long
2019.07.31 17:58:12 4: sduino: TFA message start(3)=245 end=297 with length=52
2019.07.31 17:58:12 4: sduino: TFA message part(3)=4595356017440
2019.07.31 17:58:12 4: sduino: TFA message start(4)=310 end=362 with length=52
2019.07.31 17:58:12 4: sduino: TFA message part(4)=4595356017440
2019.07.31 17:58:12 4: sduino: repeated hex 4595356017440 found 3 times
2019.07.31 17:58:12 4: sduino: SD_WS_Parse Protocol: 58, rawData: 4595356017440
2019.07.31 17:58:12 4: sduino: decoded protocolid 58 (TFA 30.3208.0) sensor id=149
2019.07.31 17:58:20 4: sduino/msg READ: MC;LL=-1045;LH=880;SL=-568;SH=435;D=800AE53AECDBC3B7C005729D76;C=487;L=104;
2019.07.31 17:58:20 4: sduino: Found manchester Protocol id 10 clock 487 -> Oregon Scientific v2|v3
2019.07.31 17:58:20 4: sduino: Found manchester Protocol id 12 clock 487 -> Hideki
2019.07.31 17:58:20 4: sduino: receive Hideki protocol not inverted
2019.07.31 17:58:20 4: sduino: Hideki protocol converted to hex: 75E5DDB6C3F600D494 with 81 bits, messagestart 12
2019.07.31 17:58:20 4: sduino Hideki_Parse: incomming P12#75E5DDB6C3F600D494
2019.07.31 17:58:20 4: sduino Hideki_crc: rawdata=75E5DDB6C3F600D494 to short, count=19 data length=9
2019.07.31 17:58:20 4: sduino: Found manchester Protocol id 52 clock 487 -> Oregon Scientific PIR
2019.07.31 17:58:20 4: sduino: Found manchester Protocol id 58 clock 487 -> TFA 30.3208.0
2019.07.31 17:58:20 4: sduino: TFA 30.3208.0 preamble_pos = 14
2019.07.31 17:58:20 4: sduino: TFA message start(1)=14 end=66 with length=52
2019.07.31 17:58:20 4: sduino: TFA message part(1)=46B144C90F120
2019.07.31 17:58:20 4: sduino: TFA message start(2)=79 end=104 with length=25
2019.07.31 17:58:20 4: sduino: TFA message part(2): message with length=25 is to short
2019.07.31 17:58:21 4: sduino/msg READ: MC;LL=-1053;LH=897;SL=-562;SH=401;D=6DE1DBE002B94EBB36F0EDE;C=485;L=91;
2019.07.31 17:58:21 4: sduino: Found manchester Protocol id 10 clock 485 -> Oregon Scientific v2|v3
2019.07.31 17:58:21 4: sduino: Found manchester Protocol id 12 clock 485 -> Hideki
2019.07.31 17:58:21 4: sduino: Found manchester Protocol id 52 clock 485 -> Oregon Scientific PIR
2019.07.31 17:58:21 4: sduino: Found manchester Protocol id 58 clock 485 -> TFA 30.3208.0
2019.07.31 17:58:21 4: sduino: TFA 30.3208.0 preamble_pos = 40
2019.07.31 17:58:21 4: sduino: TFA message start(1)=40 end=91 with length=51
2019.07.31 17:58:21 4: sduino: TFA message part(1): message with length=51 is to short
2019.07.31 17:58:22 4: sduino/msg READ: MS;P1=498;P2=-1948;P3=-3886;P4=-9193;D=14121312131212131212121212131212121212121213131313121213131212131213121313;CP=1;SP=4;O;
2019.07.31 17:58:22 4: sduino: Matched MS Protocol id 0 -> weather (v1)
2019.07.31 17:58:22 4: sduino: Decoded MS Protocol id 0 dmsg s52080F32B000 length 40
2019.07.31 17:58:22 4: sduino: CUL_TCM97001 using longid: 1 model: NC_WS
2019.07.31 17:58:22 4: sduino: Matched MS Protocol id 0.3 -> weather (v4)
2019.07.31 17:58:22 4: sduino: Decoded MS Protocol id 0.3 dmsg s52080F32B000 length 40
2019.07.31 17:58:22 4: sduino Dispatch: s52080F32B000, Dropped due to short time or equal msg
2019.07.31 17:58:22 4: sduino: Matched MS Protocol id 0.4 -> weather (v5)
2019.07.31 17:58:22 4: sduino/msg READ: MS;P0=-3891;P1=508;P2=-1935;P3=-9217;D=13121012101212101212121212101212121212121210101010121210101212101210121010;CP=1;SP=3;O;
2019.07.31 17:58:22 4: sduino: Matched MS Protocol id 0 -> weather (v1)
2019.07.31 17:58:22 4: sduino: Decoded MS Protocol id 0 dmsg s52080F32B000 length 40
2019.07.31 17:58:22 4: sduino Dispatch: s52080F32B000, Dropped due to short time or equal msg
2019.07.31 17:58:22 4: sduino: Matched MS Protocol id 0.3 -> weather (v4)
2019.07.31 17:58:22 4: sduino: Decoded MS Protocol id 0.3 dmsg s52080F32B000 length 40
2019.07.31 17:58:22 4: sduino Dispatch: s52080F32B000, Dropped due to short time or equal msg
2019.07.31 17:58:22 4: sduino: Matched MS Protocol id 0.4 -> weather (v5)
2019.07.31 17:58:26 4: sduino/msg READ: MC;LL=-1046;LH=907;SL=-545;SH=466;D=AEBD3F256FE13C00575E9F92B7F09E002BAF4D75E9F92B7F09E002BAF4FC95BF84F0015D7A7E4AC04278;C=489;L=333;
2019.07.31 17:58:26 4: sduino: Found manchester Protocol id 10 clock 489 -> Oregon Scientific v2|v3
2019.07.31 17:58:26 4: sduino: Found manchester Protocol id 12 clock 489 -> Hideki
2019.07.31 17:58:26 4: sduino: Found manchester Protocol id 52 clock 489 -> Oregon Scientific PIR
2019.07.31 17:58:26 4: sduino: Found manchester Protocol id 58 clock 489 -> TFA 30.3208.0
2019.07.31 17:58:26 4: sduino: TFA 30.3208.0 preamble_pos = 67
2019.07.31 17:58:26 4: sduino: TFA message start(1)=67 end=119 with length=52
2019.07.31 17:58:26 4: sduino: TFA message part(1)=450B036A407B0
2019.07.31 17:58:26 4: sduino: TFA message start(2)=132 end=203 with length=71
2019.07.31 17:58:26 4: sduino: TFA message part(2): message with length=71 is to long
2019.07.31 17:58:26 4: sduino: TFA message start(3)=216 end=268 with length=52
2019.07.31 17:58:26 4: sduino: TFA message part(3)=450B036A407B0
2019.07.31 17:58:26 4: sduino: TFA message start(4)=281 end=333 with length=52
2019.07.31 17:58:26 4: sduino: TFA message part(4)=450B036A7F7B0
2019.07.31 17:58:26 4: sduino: repeated hex 450B036A407B0 found 2 times
2019.07.31 17:58:26 4: sduino: SD_WS_Parse Protocol: 58, rawData: 450B036A407B0
2019.07.31 17:58:26 4: sduino: decoded protocolid 58 (TFA 30.3208.0) sensor id=11
2019.07.31 17:58:41 4: sduino/msg READ: MU;P0=-631;P1=-370;P2=2600;P3=417;P4=-563;P5=-1066;D=01213434343434350505343405043505340434353405340534053404343534343404353405340435340505343434043434343434343434343505053434050435053404343534053405340534043435343434043534053404353405053434340434343434343434343435050534340504350534043435340534053405340434;CP=3;O;
2019.07.31 17:58:41 4: sduino: Fingerprint for MU Protocol id 61 -> FS10 matches, trying to demodulate
2019.07.31 17:58:41 4: sduino: Fingerprint for MU Protocol id 70 -> FHT80TF matches, trying to demodulate
2019.07.31 17:58:41 4: sduino: Fingerprint for MU Protocol id 74 -> FS20 matches, trying to demodulate
2019.07.31 17:58:41 4: sduino: Fingerprint for MU Protocol id 80 -> EM1000WZ matches, trying to demodulate
2019.07.31 17:58:43 4: sduino/msg READ: MC;LL=-1039;LH=914;SL=-515;SH=456;D=00000141D7AFBD66B7FE6D7AA0;C=487;L=102;
2019.07.31 17:58:43 4: sduino: Found manchester Protocol id 10 clock 487 -> Oregon Scientific v2|v3
2019.07.31 17:58:43 4: sduino: OSV3 protocol detected: msg_start = 27, message_length = 75
2019.07.31 17:58:43 4: sduino: OSV3 protocol =                     F82414823520039245F
2019.07.31 17:58:43 4: sduino: OSV3 protocol converted to hex: (50FA2814843225009342F5) with length (80) bits
2019.07.31 17:58:43 4: sduino: Found manchester Protocol id 12 clock 487 -> Hideki
2019.07.31 17:58:43 4: sduino: hideki start pattern (10101110) not found
2019.07.31 17:58:43 4: sduino: Found manchester Protocol id 52 clock 487 -> Oregon Scientific PIR
2019.07.31 17:58:43 4: sduino: Oregon PIR protocol detected: header_pos = 23
2019.07.31 17:58:43 4: SIGNALduino_unknown incomming msg: u52#FFFFFEBE28504299480192855F
2019.07.31 17:58:43 4: SIGNALduino_unknown rawData: FFFFFEBE28504299480192855F
2019.07.31 17:58:43 4: SIGNALduino_unknown Protocol: 52
2019.07.31 17:58:43 4: SIGNALduino_unknown converted to bits: 11111111111111111111111010111110001010000101000001000010100110010100100000000001100100101000010101011111
2019.07.31 17:58:43 4: SIGNALduino_unknown sduino Protocol:52 | To help decode or debug, please add u52! (attr sduino development u52)
2019.07.31 17:58:43 4: Unknown, please report
2019.07.31 17:58:43 3: sduino: Unknown code u52#FFFFFEBE28504299480192855F, help me!
2019.07.31 17:58:43 4: sduino: Found manchester Protocol id 58 clock 487 -> TFA 30.3208.0
2019.07.31 17:58:43 4: sduino: TFA 30.3208.0 preamble_pos = 25
2019.07.31 17:58:43 4: sduino: TFA message start(1)=25 end=102 with length=77
2019.07.31 17:58:43 4: sduino: TFA message part(1): message with length=77 is to long
2019.07.31 17:58:46 4: sduino/msg READ: MS;P0=-3822;P1=489;P2=-968;P3=-1954;D=10121312131312131312121212121212131212121212131213131313131212131212131212;CP=1;SP=0;O;
2019.07.31 17:58:46 4: sduino: Matched MS Protocol id 7 -> weather
2019.07.31 17:58:46 4: sduino: Decoded MS Protocol id 7 dmsg P7#5B0105F24 length 36
2019.07.31 17:58:46 4: sduino: SD_WS07_Parse SD_WS07 (P7#5B0105F24) length: 9
2019.07.31 17:58:46 4: sduino: SD_WS07_Parse SD_WS07 converted to bits 01011011 0000 000100000101 1111 00100100
2019.07.31 17:58:46 4: sduino: Matched MS Protocol id 91.1 -> Atlantic security
2019.07.31 17:58:46 4: sduino/msg READ: MS;P0=-3887;P1=497;P2=-969;P3=-1949;D=10121312131312131312121212121212131212121212131213131313131212131212131212;CP=1;SP=0;O;
2019.07.31 17:58:46 4: sduino: Matched MS Protocol id 7 -> weather
2019.07.31 17:58:46 4: sduino: Decoded MS Protocol id 7 dmsg P7#5B0105F24 length 36
2019.07.31 17:58:46 4: sduino Dispatch: P7#5B0105F24, Dropped due to short time or equal msg
2019.07.31 17:58:46 4: sduino: Matched MS Protocol id 91.1 -> Atlantic security
2019.07.31 17:58:46 4: sduino/msg READ: MS;P0=-3899;P1=510;P2=-954;P3=-1934;D=10121312131312131312121212121212131212121212131213131313131212131212131212;CP=1;SP=0;O;
2019.07.31 17:58:46 4: sduino: Matched MS Protocol id 7 -> weather
2019.07.31 17:58:46 4: sduino: Decoded MS Protocol id 7 dmsg P7#5B0105F24 length 36
2019.07.31 17:58:46 4: sduino Dispatch: P7#5B0105F24, Dropped due to short time or equal msg
2019.07.31 17:58:46 4: sduino: Matched MS Protocol id 91.1 -> Atlantic security
2019.07.31 17:58:47 4: sduino/msg READ: MU;P0=-9552;P1=510;P2=-963;P3=-1952;P7=256;D=12131213131213131212121212121213121212121213121313131313121213121213121270;CP=1;
2019.07.31 17:58:47 4: sduino: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2019.07.31 17:58:55 4: sduino/keepalive ok, retry = 0
2019.07.31 17:58:57 4: sduino/msg READ: MS;P0=-8966;P2=-1939;P3=509;P4=-3888;D=30323432343232343232323232343232323232323234343434323234343232343234323434;CP=3;SP=0;
2019.07.31 17:58:57 4: sduino: Matched MS Protocol id 0 -> weather (v1)
2019.07.31 17:58:57 4: sduino: Decoded MS Protocol id 0 dmsg s52080F32B000 length 40
2019.07.31 17:58:57 4: sduino: CUL_TCM97001 using longid: 1 model: NC_WS
2019.07.31 17:58:57 4: sduino: Matched MS Protocol id 0.3 -> weather (v4)
2019.07.31 17:58:57 4: sduino: Decoded MS Protocol id 0.3 dmsg s52080F32B000 length 40
2019.07.31 17:58:57 4: sduino Dispatch: s52080F32B000, Dropped due to short time or equal msg
2019.07.31 17:58:57 4: sduino: Matched MS Protocol id 0.4 -> weather (v5)
2019.07.31 17:58:57 4: sduino/msg READ: MS;P0=-3885;P1=519;P2=-1929;P3=-8792;D=13121012101212101212121212101212121212121210101010121210101212101210121010;CP=1;SP=3;
2019.07.31 17:58:57 4: sduino: Matched MS Protocol id 0 -> weather (v1)
2019.07.31 17:58:57 4: sduino: Decoded MS Protocol id 0 dmsg s52080F32B000 length 40
2019.07.31 17:58:57 4: sduino Dispatch: s52080F32B000, Dropped due to short time or equal msg
2019.07.31 17:58:57 4: sduino: Matched MS Protocol id 0.4 -> weather (v5)
2019.07.31 17:58:57 4: sduino/msg READ: MU;P0=-432;P1=492;P2=-1931;P3=-3592;P4=-8716;P5=876;D=0121312131212131212121212131212121212121213131313121213131212131213121313141354;CP=1;

elektron-bbs

Zitat von: Flipper92 am 30 Juli 2019, 18:46:35
Nun hab ich noch zwei Renkforce FT007TP Thermosensoren die ich gerne mit einbinden möchte.
Leider reagiert hier der Autocreate leider nicht so schön, wie bei den FT007TH's.

Es scheint so, als ob die Sensoren das gleiche Protokoll verwenden. Allerdings kann ich das mit den wenigen Nachrichten nicht nachvollziehen. in deinem Log sind offensichtlich auch Nachrichten der funktionierenden Sensoren dabei. Wir benötigen Logs, wo nur die beiden "Renkforce FT007TP Thermosensoren" enthalten sind.
Am besten postest du diese gleich auf https://github.com/RFD-FHEM/RFFHEM/issues/617
Intel(R) Atom(TM) CPU N270 mit 2 SIGNALduino nanoCC1101 + ESPEasy 2x serial server SIGNALduino nanoCC1101, Raspberry Pi 2 mit 2 CUL Stackable CC1101, Raspberry Pi 3 mit SIGNALduino radino + nano328 + 2 x SIGNAL-ESP CC1101 + LaCrosseGateway

Ralf9

Hallo,
Verwendest du immer noch die sehr alte Firmware v 3.3.1 dev von 2017?
In der sind noch einige Fehler drin, die inzwischen behoben wurden.
Falls ja, bitte flashe eine aktuelle Firmware
Gruss Ralf
FHEM auf Cubietruck mit Igor-Image, SSD und  hmland + HM-CFG-USB-2,  HMUARTLGW Lan,   HM-LC-Bl1PBU-FM, HM-CC-RT-DN, HM-SEC-SC-2, HM-MOD-Re-8, HM-MOD-Em-8
HM-Wired:  HMW_IO_12_FM, HMW_Sen_SC_12_DR, Selbstbau IO-Module HBW_IO_SW
Maple-SIGNALduino, WH3080,  Hideki, Id 7

Flipper92

Zitat von: Ralf9 am 31 Juli 2019, 21:55:56Verwendest du immer noch die sehr alte Firmware v 3.3.1 dev von 2017?
In der sind noch einige Fehler drin, die inzwischen behoben wurden.
Falls ja, bitte flashe eine aktuelle Firmware

Hab nun ein Update gemacht. Scheint auch soweit funktioniert zu haben.
Internals:
   Clients    :IT:CUL_TCM97001:SD_RSL:OREGON:CUL_TX:SD_AS:Hideki:SD_WS07:SD_WS09: :SD_WS:RFXX10REC:Dooya:SOMFY:SD_BELL:SD_UT:SD_WS_Maverick:FLAMINGO:CUL_WS:Revolt: :FS10:CUL_FHTTK:Siro:FHT:FS20:CUL_EM:Fernotron:SD_Keeloq:SIGNALduino_un:
   DEF        /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0@57600
   DMSG       W58#46C754970DDB0
   DevState   initialized
   DeviceName /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0@57600
   FD         7
   FUUID      5d0e8c2a-f33f-39e8-3935-4048067fb6c5a03b
   FVERSION   00_SIGNALduino.pm:v34.0.0-s19857/2019-07-19
   IDsNoDispatch 2,72.1,82
   ITClock    250
   LASTDMSG   W58#46C754970DDB0
   LASTDMSGID 58
   MSGCNT     147
   NAME       sduino
   NR         16
   PARTIAL   
   RAWMSG     MC;LL=-1008;LH=951;SL=-532;SH=463;D=002B938AB68F224F0015C9C55B479127800AE4E2A;C=487;L=164;
   STATE      opened
   TIME       1564653795
   TYPE       SIGNALduino
   sendworking 0
   version    V 3.3.1-experimental SIGNALduino  - compiled at Jun 16 2019 00:08:41
   versionProtocols 1.06
   versionmodul v3.4.0
   DoubleMsgIDs:
   MatchList:
     10:SD_WS07 ^P7#[A-Fa-f0-9]{6}[AFaf][A-Fa-f0-9]{2,3}
     11:SD_WS09 ^P9#F[A-Fa-f0-9]+
     12:SD_WS   ^W\d+x{0,1}#.*
     13:RFXX10REC ^(20|29)[A-Fa-f0-9]+
     14:Dooya   ^P16#[A-Fa-f0-9]+
     15:SOMFY   ^Ys[0-9A-F]+
     16:SD_WS_Maverick ^P47#[A-Fa-f0-9]+
     17:SD_UT   ^P(?:14|29|30|34|46|69|76|81|83|86|90|91|91.1|92|93|95)#.*
     18:FLAMINGO ^P13\.?1?#[A-Fa-f0-9]+
     19:CUL_WS  ^K[A-Fa-f0-9]{5,}
     1:IT       ^i......
     20:Revolt  ^r[A-Fa-f0-9]{22}
     21:FS10    ^P61#[A-F0-9]+
     22:Siro    ^P72#[A-Fa-f0-9]+
     23:FHT     ^81..(04|09|0d)..(0909a001|83098301|c409c401)..
     24:FS20    ^81..(04|0c)..0101a001
     25:CUL_EM  ^E0.................
     26:Fernotron ^P82#.*
     27:SD_BELL ^P(?:15|32|41|42|57|79)#.*
     28:SD_Keeloq ^P(?:87|88)#.*
     2:CUL_TCM97001 ^s[A-Fa-f0-9]+
     3:SD_RSL   ^P1#[A-Fa-f0-9]{8}
     4:OREGON   ^(3[8-9A-F]|[4-6][0-9A-F]|7[0-8]).*
     5:CUL_TX   ^TX..........
     6:SD_AS    ^P2#[A-Fa-f0-9]{7,8}
     7:Hideki   ^P12#75[A-F0-9]+
     9:CUL_FHTTK ^T[A-F0-9]{8}
     X:SIGNALduino_un ^[u]\d+#.*
   QUEUE:
   READINGS:
     2019-08-01 11:23:33   config          MS=1;MU=1;MC=1;Mred=1
     2019-08-01 11:29:36   ping            OK
     2019-08-01 12:01:05   state           opened
     2019-08-01 12:01:05   version         V 3.3.1-experimental SIGNALduino  - compiled at Jun 16 2019 00:08:41
   additionalSets:
     flash      release,3.3.0
   keepalive:
     ok         1
     retry      0
   mcIdList:
     10
     11
     12
     18
     43
     47
     52
     57
     58
     96
   msIdList:
     0
     0.1
     0.2
     0.3
     0.4
     1
     3
     3.1
     4
     6
     7
     13
     13.2
     14
     15
     17
     23
     25
     33
     33.1
     33.2
     35
     41
     51
     55
     65
     74.1
     87
     88
     90
     91.1
     93
   muIdList:
     8
     9
     13.1
     16
     17.1
     19
     21
     22
     24
     26
     27
     28
     29
     30
     31
     32
     34
     36
     37
     38
     39
     40
     42
     44
     44.1
     45
     46
     48
     49
     50
     56
     59
     60
     61
     62
     64
     66
     67
     69
     70
     71
     72
     73
     74
     76
     79
     80
     81
     83
     84
     85
     86
     89
     91
     92
     94
     95
Attributes:
   hardware   nano328


Zitat von: elektron-bbs am 31 Juli 2019, 21:49:20
Es scheint so, als ob die Sensoren das gleiche Protokoll verwenden. Allerdings kann ich das mit den wenigen Nachrichten nicht nachvollziehen. in deinem Log sind offensichtlich auch Nachrichten der funktionierenden Sensoren dabei. Wir benötigen Logs, wo nur die beiden "Renkforce FT007TP Thermosensoren" enthalten sind.
Am besten postest du diese gleich auf https://github.com/RFD-FHEM/RFFHEM/issues/617

Dann werde ich Mal alle Funksensoren ausschalten und nochmal versuchen.

elektron-bbs

Besteht hier eigentlich noch Handlungsbedarf, oder hat sich das erledigt?
Intel(R) Atom(TM) CPU N270 mit 2 SIGNALduino nanoCC1101 + ESPEasy 2x serial server SIGNALduino nanoCC1101, Raspberry Pi 2 mit 2 CUL Stackable CC1101, Raspberry Pi 3 mit SIGNALduino radino + nano328 + 2 x SIGNAL-ESP CC1101 + LaCrosseGateway