[abgelaufen] Sammelbestellung eBus RPI Adapter V2.2 Winter 2019

Begonnen von Reinhart, 07 November 2019, 09:36:27

Vorheriges Thema - Nächstes Thema

integrator

Hallo!

für mich bitte einen RPI-Adapter, mit DC-Wandler, gelötet und geprüft für 32€.

Mit besten Grüßen
Marcus Wilkens

Reinhart

Zitat von: definitio am 24 November 2019, 12:42:02
Hello,
Can I order a kit RPI adapter?

Yes, I have entered you in the order list! More information via PM if the boards are there.
FHEM auf Raspy4 mit Bullseye + SSD, Homematic, ESP8266, ESP32, Sonoff, eBus, NanoCUL, MapleCUL, , MQTT2, Alexa

Burgerking

Hallo und Guten Abend!
Ich bin Neu und habe Probleme mit einem neuen esera Ethernet Adpater.

Deswegen möchte ich jetzt (RPI3 besitze ich bereits) einen fertigen Bausatz kaufen.
Könnt ihr mir bitte helfen: Was brauche ich für Adapter und Bausätze?

Danke und lg
Christian

Reinhart

#33
Zitat von: Burgerking am 25 November 2019, 19:37:39
Deswegen möchte ich jetzt (RPI3 besitze ich bereits) einen fertigen Bausatz kaufen.
Könnt ihr mir bitte helfen: Was brauche ich für Adapter und Bausätze?

Na ja, der Adapter ist fertig und sofort einsatzbereit und beim Bausatz erhältst du alle benötigten Teile und du musst es selber zusammen löten. Das Ergebnis ist das gleiche, nämlich ein funktionierender Adapter.

Wenn dein Esera nicht 100% funktioniert, wieviele Geräte hängen den an deinem eBus?

LG
Reinhart
FHEM auf Raspy4 mit Bullseye + SSD, Homematic, ESP8266, ESP32, Sonoff, eBus, NanoCUL, MapleCUL, , MQTT2, Alexa

Burgerking

#34
Hi Reinhart!

Jede Menge :) Entschuldigt wenn es hiert nicht so passt, aber ich bin am verzweifeln

Vaillant VWF 117/4 (LWP)
VRC700 (Bedienungsteil im Wohnzimmer)
VR91 (Fernbedienung in der alten Einliegerwohnung)
RecoVair 360/4 E (Lüftung)
VR 920 (Internetmodul)
vaillant VR70 (Mischermodul) + Pufferspeicher / 2 Heizkreise
aguaFLOW exclusive VPM 30/35/2 (Trinkwasserstation)

Ich ärgere mich schon Wochen mit dem Ding. John hat es auch schon versucht :)

Folgendes:

# Options to pass to ebusd (run "ebusd -?" for more info):
EBUSD_OPTS="--device=tcp:10.0.0.25:5000 --scanconfig=full -l /var/log/ebusd.log --enablehex --receivetimeout=100000"


pi@raspberrypi001:~ $ ebusctl hex 08070400
ERR: read timeout

pi@raspberrypi001:~ $  ebusctl find -d
scan.0a  = Vaillant;PMW01;0206;8302
scan.12  = Vaillant;PMW01;0206;8302
scan.38  = Vaillant;V32;0117;9802
scan.fc  = Vaillant;PMW01;0206;8302
scan.fc id = 21;17;30;0010014311;3110;012059;N9



i@raspberrypi001:~/ebusd-configuration/ebusd-2.x.x/de $ ebusctl find -r
broadcast id = no data stored
general valuerange = no data stored
hwc ActorFernsteuerung = no data stored
hwc ActualKrm = no data stored
hwc ActualTappingTempDesired = no data stored
hwc ActualTnm = no data stored
hwc AutoTappingTempDesired = no data stored
hwc BigHExThreshold = no data stored
hwc CalculatedMixerPosition = no data stored
hwc CircoPump = no data stored
hwc currenterror = no data stored
hwc Date = no data stored
hwc DateTime = no data stored
hwc DurchflussTemp = no data stored
hwc ElectricalHeater = no data stored
hwc EnableHwcOperation = no data stored
hwc errorhistory = no data stored
hwc HeatDemand = no data stored
hwc HExIndex = no data stored
hwc HexMonitoringCounter = no data stored
hwc HExThreshold = no data stored
hwc HolidayStart = no data stored
hwc Krm = no data stored
hwc KrmFaktorMiddl = no data stored
hwc KrmFaktorSmall = no data stored
hwc Krp = no data stored
hwc LegioStartDay = no data stored
hwc LegioStartTime = no data stored
hwc ManualTappingTempDesired = no data stored
hwc Mode = no data stored
hwc Ntc1Sensor = no data stored
hwc Ntc2Sensor = no data stored
hwc Ntc3Sensor = no data stored
hwc OperatingMode = no data stored
hwc OverheatTimer = no data stored
hwc Params = no data stored
hwc PartyStart = no data stored
hwc PumpED = no data stored
hwc QuickVetoStart = no data stored
hwc QuickVetoTempDesired = no data stored
hwc SingleStorageCharge = no data stored
hwc StateCircoKick = no data stored
hwc StateHExMonitoring = no data stored
hwc StateMainControl = no data stored
hwc StateMixerPumpControl = no data stored
hwc Status0a = no data stored
hwc Status16 = no data stored
hwc Status = no data stored
hwc SteBusCheckFailedCounter = no data stored
hwc StFrostProtCounter = no data stored
hwc StInstallationDate = no data stored
hwc StLegioAbortTimeCounter = no data stored
hwc StLegioStopTimeCounter = no data stored
hwc TeleSwitch = no data stored
hwc TeleSwitchState = no data stored
hwc Time = no data stored
hwc Timer.Friday = no data stored
hwc Timer.Monday = no data stored
hwc Timer.Saturday = no data stored
hwc Timer.Sunday = no data stored
hwc Timer.Thursday = no data stored
hwc Timer.Tuesday = no data stored
hwc Timer.Wednesday = no data stored
hwc TimeTicker = no data stored
hwc Tm = no data stored
hwc Tnm = no data stored
hwc TnmFaktorMiddl = no data stored
hwc TnmFaktorSmall = no data stored
hwc Tp = no data stored
hwc Tvm = no data stored
hwc Tvp = no data stored
hwc Vortex = no data stored
hwc VPMWMode = no data stored
hwc Weekday = no data stored
hwc ZaehlerBetriebsStunden = no data stored
memory eeprom = no data stored
memory ram = no data stored
scan id = no data stored
scan.0a  = Vaillant;PMW01;0206;8302
scan.0a id = no data stored
scan.12  = Vaillant;PMW01;0206;8302
scan.15  = no data stored
scan.38  = Vaillant;V32;0117;9802
scan.fc  = Vaillant;PMW01;0206;8302
scan.fc id = 21;17;30;0010014311;3110;012059;N9


pi@raspberrypi001:~/ebusd-configuration/ebusd-2.x.x/de $ ebusctl i
version: ebusd 3.4.v3.4
update check: OK
signal: acquired
symbol rate: 32
max symbol rate: 79
min arbitration micros: 32
max arbitration micros: 254
min symbol latency: 8
max symbol latency: 24
reconnects: 0
masters: 3
messages: 119
conditional: 15
poll: 0
update: 8
address 0a: slave, scanned "MF=Vaillant;ID=PMW01;SW=0206;HW=8302", loaded "vaillant/0a.pmw.hwc.csv"
address 12: slave, scanned "MF=Vaillant;ID=PMW01;SW=0206;HW=8302"
address 31: master #8, ebusd
address 33: master #13
address 36: slave #8, ebusd
address 38: slave #13, scanned "MF=Vaillant;ID=V32;SW=0117;HW=9802"
address f7: master #20
address fc: slave #20, scanned "MF=Vaillant;ID=PMW01;SW=0206;HW=8302"


pi@raspberrypi001:~/ebusd-configuration/ebusd-2.x.x/de $ ebusctl
localhost: scan 15
ERR: read timeout

Reinhart

oh ja ist mir klar, das ist sehr viel an Devices und Ethernet am eBus ist ohnehin ein eigenes Kapitel wegen der Latenz.
Das ist vermutlich auch der Grund warum nicht alle Geräte beim Scan erfasst werden. Vermutlich kann das nach jedem Neustart des Dämons auch etwas anders aussehen.
Bei so vielen Geräten kann die Stromreserve am eBus schon an der Kippe sein, außer eines der Geräte macht zusätzlich noch eine Speisung. Diese Situation sollte durch unsere Schaltung mit dem DC-Wandler (somit wird fast kein Strom aus dem Bus gezogen) verbessert werden. Dazu gab es schon einige Erfolgsberichte.

Eine Bitte noch, wenn du wieder Loginhalte postest benutze bitte das "#" Zeichen im Editor, damit kannst du Code Tags einfügen und es wird besser lesbar.

LG
FHEM auf Raspy4 mit Bullseye + SSD, Homematic, ESP8266, ESP32, Sonoff, eBus, NanoCUL, MapleCUL, , MQTT2, Alexa

Burgerking

Aha Reinhart. Das wäre wenigstens mal ein Erklärung...
Aber eine Datei lädt er ja, aber ausgelesen wird auch nix (Frischwasserstation)

Ich würde dann bitte das fertig gelötet Teil kaufen. (Also ich habe den RPI3)

Bitte Danke!
lg
Christian

ps: Habe den Post editiert, wegen dem #

Tutgut79

Hallo Reinhart,

auch für mich bitte einen RPI-Adapter mit DC-Wandler gelötet und geprüft für €32,-

Vielen Dank und beste Grüße,
Marcel

Reinhart

INFO

Die Platinen sind heute am 29.11 angekommen. Ein Teil davon ist jetzt zu galileo unterwegs, der wird für euch 35 Stück fertig löten und prüfen.
Da ich gerade krank bin, kann ich mit der Produktion vermutlich erst nächste Woche beginnen, der Versand der fertigen Adapter wird also noch mindestens eine Woche dauern.
Die Bausätze und Einzelplatinen werden ab Montag den 02.12 versendet.
Sofern die Weihnachtspost es mitmacht solltet ihr aber alle noch vor Weihnachten eure Bestellungen erhalten!

LG
Reinhart
FHEM auf Raspy4 mit Bullseye + SSD, Homematic, ESP8266, ESP32, Sonoff, eBus, NanoCUL, MapleCUL, , MQTT2, Alexa

ramadina

Hallo Reinhart, hab ich was nicht mitbekommen oder schickt Du noch eine PM mit Deiner Paypal-Adresse ? Sollst ja nicht auf den Kosten sitzen bleiben.

Im Übrigen ein dickes Danke für die Organisation und vor Allem:  GUTE BESSERUNG !

Reinhart

Erst wenn die Adapter versandfertig sind (bzw. kurz vorher), bekommt ihr von mir eine PN mit den Kontodaten (Paypal oder Bankkonto).
Es wird sonst für mich sehr schnell unübersichtlich wenn dazwischen zuviel Zeit vergeht. Die Zahlungsmoral hier im Forum ist ja zu 100% gegeben und die meisten zahlen innerhalb weniger Minuten/Stunden. Ich hatte da noch kein einziges Problem damit und bleib auch nicht auf meinen Kosten sitzen. Wichtig ist jetzt für euch das schon mal die Platinen da sind!

Also bitte noch etwas Geduld, galileo heizt seinen Lötkolben schon auf und dann darfst du dein Geld einzahlen!

LG
Reinhart
FHEM auf Raspy4 mit Bullseye + SSD, Homematic, ESP8266, ESP32, Sonoff, eBus, NanoCUL, MapleCUL, , MQTT2, Alexa

domo_beginner

Hello Reinhart,

Are there any cards left ? I would be very happy if I could order a RPI card, welded and fully tested for 32€ included shipping (to EU).

Sorry for not writing in german but my classes are too far away and I remember only Rot=red, Gelb=yellow which is quite limited :-).
I'am new on this forum and, first of all, I would like to thank all members for their contributions. I learned so many things.

My project consists in trying to monitor (maybe later command as well) my boiler (brand Chaffoteaux). For now, to be sure that my boiler uses eBus, I made a little eBus read only adapteur with a simple tension divider connected to the RX port of a RPI 2B. With ebusd and ttyebus lib a grab command show me some messages. I have to go to the next step so a better adapter is needed.

Thank for the logistics.
JP

Reinhart

FHEM auf Raspy4 mit Bullseye + SSD, Homematic, ESP8266, ESP32, Sonoff, eBus, NanoCUL, MapleCUL, , MQTT2, Alexa

deune

Hallo Reinhart,

wenn noch einer verfügbar ist, würde ich mich auch über einen RPI-Adapter mit DC-Wandler gelötet und geprüft für €32,- freuen

Herzliche Grüße aus der Eifel
Holger

MrStonedfire

Hallo Reinhart,

für mich bitte einen RPI-Adapter, mit DC-Wandler, gelötet und geprüft für 32€.

Viele Grüße
Dennis