Probleme mit Fibaro Switch 2

[Frank13]

Hallo allerseits!

Ich habe ein Problem mit meinem neuen FIBARO FIBEFGS-223 Double Switch 2.
Ich kann per angeschlossenem Schalter beide Kanäle schalten (Hardware scheint also ok), ich kann aber in FHEM die beiden "Unterkanäle" nicht bedienen. Wenn ich das Hauptdevice schalte, schaltet Kanal 1 wie gewünscht. Bei manuellem Schalten folgen die "FHEM-Leuchten" korrekt dem Zustand.

Hat da jemand eine Idee?

Viele Grüße und noch ein frohes neues Jahr für alle!

Frank13


Hier noch das List vom Hauptdevice:

Code Auswählen Erweitern


Internals:
   DEF        d018117e 9
   FUUID      5e0dd9ae-f33f-c664-21bd-9e48e21c8ac652bd
   IODev      ZWDongle_0
   NAME       ZWave_SWITCH_BINARY_9
   NR         56
   STATE      off
   TYPE       ZWave
   ZWaveSubDevice no
   cmdsPending 0
   endpointChildren ZWave_Node_9.1,ZWave_Node_9.2
   homeId     d018117e
   isWakeUp   
   lastMsgSent 1577966340.17169
   nodeIdHex  09
   READINGS:
     2020-01-02 06:51:14   CMD             ZW_APPLICATION_UPDATE
     2020-01-02 12:53:19   associatedWith  ZWave_Node_9.1,ZWave_Node_9.2
     2020-01-02 06:57:40   configAssociationsInZWaveNetwork27 15
     2020-01-02 06:57:40   configFirstChannelEnergyReports 100
     2020-01-02 06:57:40   configFirstChannelMinimalTimeBetween51 10
     2020-01-02 06:57:40   configFirstChannelOperatingMode StandardOperation
     2020-01-02 06:57:40   configFirstChannelPowerReports 20
     2020-01-02 06:57:40   configFirstChannelPulseTimeForFlashing13 5
     2020-01-02 06:57:40   configFirstChannelReactionToSwitchFor11 CancelModeAndSetTargetState
     2020-01-02 06:57:40   configFirstChannelTimeParameterFor12 50
     2020-01-02 06:57:40   configFlashingAlarmDuration 600
     2020-01-02 06:57:40   configFlashingModeReport Disabled
     2020-01-02 06:57:40   configMeasuringEnergyConsumedByThe60 functionInactive
     2020-01-02 06:57:40   configPeriodicEnergyReports 3600
     2020-01-02 06:57:40   configPeriodicPowerReports 3600
     2020-01-02 06:57:41   configReactionToCOCO2SmokeAlarm Flash
     2020-01-02 06:57:41   configReactionToFloodAlarm TurnOFF
     2020-01-02 06:57:42   configReactionToGeneralAlarm Flash
     2020-01-02 06:57:43   configReactionToHeatAlarm TurnOn
     2020-01-02 06:57:44   configS1AssociationsSentTo2ndAnd3rd30 0
     2020-01-02 06:57:44   configS1SwitchDoubleClickValueSent33 99
     2020-01-02 06:55:31   configS1SwitchOFFValueSentTo2ndAnd3rd32 0
     2020-01-02 06:57:44   configS1SwitchONValueSentTo2ndAnd3rd31 255
     2020-01-02 06:57:44   configS1SwitchScenesSent 0
     2020-01-02 06:57:44   configS2AssociationsSentTo4thAnd5th35 0
     2020-01-02 06:57:44   configS2SwitchDoubleClickValueSent38 99
     2020-01-02 06:57:44   configS2SwitchOFFValueSentTo4thAnd5th37 0
     2020-01-02 06:57:44   configS2SwitchONValueSentTo4thAnd5th36 255
     2020-01-02 06:57:44   configS2SwitchScenesSent 0
     2020-01-02 06:57:44   configSavingStateBeforePowerFailure StateSavedAtPowerFailureAll1
     2020-01-02 06:57:44   configSecondChannelEnergyReports 100
     2020-01-02 06:57:44   configSecondChannelMinimalTimeBetween55 10
     2020-01-02 06:57:44   configSecondChannelOperatingMode StandardOperation
     2020-01-02 06:57:44   configSecondChannelPowerReports 20
     2020-01-02 06:57:44   configSecondChannelPulseTimeFor18 5
     2020-01-02 06:57:44   configSecondChannelReactionToSwitchFor16 CancelModeAndSetTargetState
     2020-01-02 06:57:44   configSecondChannelTimeParameterFor17 50
     2020-01-02 06:57:44   configSwitchType ToggleSwitchDeviceChangesStatus2
     2020-01-02 06:51:47   mcCapability_01 ZWAVEPLUS_INFO VERSION SWITCH_BINARY ASSOCIATION ASSOCIATION_GRP_INFO MULTI_CHANNEL_ASSOCIATION METER MARK SWITCH_MULTILEVEL
     2020-01-02 06:51:47   mcCapability_02 ZWAVEPLUS_INFO VERSION SWITCH_BINARY ASSOCIATION ASSOCIATION_GRP_INFO MULTI_CHANNEL_ASSOCIATION METER MARK SWITCH_MULTILEVEL
     2020-01-02 06:51:47   mcEndpoints     total 2, identical
     2020-01-02 06:56:30   model           FIBARO System FGS223 Double Relay
     2020-01-02 06:56:30   modelConfig     fibaro/fgs223.xml
     2020-01-02 06:56:30   modelId         010f-0203-1000
     2020-01-02 12:59:00   state           off
     2020-01-02 12:59:00   timeToAck       0.096
     2020-01-02 12:59:00   transmit        OK
Attributes:
   IODev      ZWDongle_0
   classes    ZWAVEPLUS_INFO VERSION MANUFACTURER_SPECIFIC SWITCH_BINARY DEVICE_RESET_LOCALLY ASSOCIATION_GRP_INFO ASSOCIATION POWERLEVEL CRC_16_ENCAP CONFIGURATION METER MULTI_CHANNEL_ASSOCIATION MULTI_CHANNEL APPLICATION_STATUS PROTECTION ALARM SECURITY FIRMWARE_UPDATE_MD CENTRAL_SCENE MARK SWITCH_MULTILEVEL
   room       ZWave
   vclasses   ALARM:5 APPLICATION_STATUS:1 ASSOCIATION:2 ASSOCIATION_GRP_INFO:1 CENTRAL_SCENE:2 CONFIGURATION:1 CRC_16_ENCAP:1 DEVICE_RESET_LOCALLY:1 FIRMWARE_UPDATE_MD:3 MANUFACTURER_SPECIFIC:2 METER:3 MULTI_CHANNEL:4 MULTI_CHANNEL_ASSOCIATION:3 PROTECTION:2 SECURITY:1 SWITCH_MULTILEVEL:3 VERSION:2 ZWAVEPLUS_INFO:2


Node 1:

Code Auswählen Erweitern


Internals:
   DEF        d018117e 2305
   FUUID      5e0dd9ae-f33f-c664-61ef-0cd99d1fd11e2c9b
   IODev      ZWDongle_0
   LASTInputDev ZWDongle_0
   MSGCNT     6
   NAME       ZWave_Node_9.1
   NR         58
   STATE      off
   TYPE       ZWave
   ZWDongle_0_MSGCNT 6
   ZWDongle_0_RAWMSG 000400090c600d01013202213200000000
   ZWDongle_0_TIME 2020-01-02 12:59:00
   ZWaveSubDevice yes
   endpointParent ZWave_SWITCH_BINARY_9
   homeId     d018117e
   isWakeUp   
   nodeIdHex  0901
   READINGS:
     2020-01-02 12:53:19   associatedWith  ZWave_SWITCH_BINARY_9
     2020-01-02 12:59:00   power           0 W
     2020-01-02 12:59:00   reportedState   off
     2020-01-02 12:59:00   state           off
Attributes:
   IODev      ZWDongle_0
   room       ZWave


Node 2:

Code Auswählen Erweitern


Internals:
   DEF        d018117e 2306
   FUUID      5e0dd9ae-f33f-c664-1dad-18a1fc495f7fac03
   IODev      ZWDongle_0
   NAME       ZWave_Node_9.2
   NR         60
   STATE      off
   TYPE       ZWave
   ZWaveSubDevice yes
   endpointParent ZWave_SWITCH_BINARY_9
   homeId     d018117e
   nodeIdHex  0902
   READINGS:
     2020-01-02 12:53:19   associatedWith  ZWave_SWITCH_BINARY_9
     2020-01-02 07:00:09   power           0 W
     2020-01-02 07:00:08   reportedState   off
     2020-01-02 07:00:08   state           off
Attributes:
   IODev      ZWDongle_0
   room       ZWave


[DerBodo]

Dir fehlen bei den Node Devices die classes.

Probier mal bitte ein get <HauptDevice> mcCapability.

Meine FGS-223 haben bei den Subdevices noch die folgenden Class Attribute:

Code Auswählen Erweitern


classes
ZWAVEPLUS_INFO VERSION SWITCH_BINARY ASSOCIATION ASSOCIATION_GRP_INFO MULTI_CHANNEL_ASSOCIATION METER MARK SWITCH_MULTILEVEL


Das Switch Binary führt dann dazu, dass du die Unterdevices einzeln schalten kannst

[Frank13]

Moin,

Das "get <HauptDevice> mcCapability" hatte keine Änderung zur Folge.

Ich habe die classes einfach mal per Hand eingetragen und jetzt funktioniert es.

Danke und viele Grüße

Frank