Öfters: DesiredTemperature: 0.0

ChrisW · 29 Januar 2013, 17:05:30

Hallo, hab mich gewundert wieso mein Plot immer bis 0c geht .. hab mal in das Log geschaut vom Termostat und zwar wird dort
DesiredTemperature: 0.0 gesetzt. Das passiert nicht immer.

Kann es auch nicht so wirklich Reproduzieren.
Aber laut Log gabs ne MAx Problem und dann wurde alles auf auto gesetzt.

Log fhem:

Code Auswählen

2013.01.29 16:55:55 3: Can't connect to 192.168.2.22:62910: Es konnte keine Verbindung hergestellt werden, da der Zielcomputer die Verbindung verweigerte.
2013.01.29 16:55:55 2: MAXLAN_Connect: Could not connect
2013.01.29 16:55:55 3: Setze Heizung Auto

Und davor auch schon mal:
Thermostat Log:
2013-01-29_14:34:40 MAX_Bad desiredTemperature: 0.0

FHEM zu dieser Zeit:
2013.01.29 14:34:41 3: Setze Heizung Auto

Also kein MAX error komisch ...

Matthias Gehre · 29 Januar 2013, 21:24:20

Puh, vielleicht hilft ein Log auf verbose 5 die Ursache zu finden.

ChrisW · 29 Januar 2013, 21:36:39

Ob ich da noch etwas finde bis der Fehler mal wieder kommt. ich behallt es im Auge.

ChrisW · 30 Januar 2013, 15:23:19

So leider hab ich im Log5 nichts gefunden bei dem jetzigen Wert0 mal beim nächsten schauen.

2013.01.30 14:17:07 3: Setze Heizung Auto
Kommt wieder 2013-01-30_14:17:12 MAX_Dach desiredTemperature: 0.0

Das komische bei den anderen Thermostat steht viel mehr:
013-01-30_14:17:07 MAX_Kueche desiredTemperature auto
2013-01-30_14:17:11 MAX_Kueche 14.0 °C
2013-01-30_14:17:12 MAX_Kueche mode: auto
2013-01-30_14:19:00 MAX_Kueche desiredTemperature: 17.0

Würde sagen der hat Probleme mit auto / eco setzen per structure aber wenn ich es immer wieder auto / eco Schalte klappt alles.

Hoffe ich bekomme mal ein brauchbares log5

ChrisW · 31 Januar 2013, 09:23:11

Hab per structur Heizung eco und auto gesetzt daraufhin im Log vom Regler:
2013-01-31_09:15:12 MAX_Bad desiredTemperature: 0.0

Hier das lange Log5:
[code]

2013.01.31 09:14:58 5: plotcommand: get FileLog_MAX_Kueche MAX_Kueche-2013.log INT 2013-01-31 2013-01-32 4:desiredTemperature:15.5: 4:MAX_.*temperature:15.5: 4:valveposition:0:
2013.01.31 09:14:58 5: Cmd: >get FileLog_MAX_Kueche MAX_Kueche-2013.log INT 2013-01-31 2013-01-32 4:desiredTemperature:15.5: 4:MAX_.*temperature:15.5: 4:valveposition:0:<
2013.01.31 09:14:58 4: /fhem?cmd=showlog%20wl_max_Kueche%20FileLog_MAX_Kueche%20maxohnetemp%20MAX_Kueche-2013.log&pos= / RL: 2122 / image/svg+xml / Content-Encoding: gzip

/
2013.01.31 09:14:58 4: HTTP FHEMWEB:93.114.45.248:50663 GET /fhem?cmd=showlog%20wl_max_bad%20FileLog_Max_Bad_Temp%20tempalles%20Max_Bad_Temp-2013-01.log&pos=
2013.01.31 09:14:58 4: Ignoring HMS100TF_0000
2013.01.31 09:14:58 4: Ignoring CUL_TX_4
2013.01.31 09:14:58 4: Ignoring CUL_WS_6
2013.01.31 09:14:58 4: Ignoring CUL_TX_63
2013.01.31 09:14:58 4: Ignoring FHT_edd1
2013.01.31 09:14:58 4: Ignoring CUL_TX_123
2013.01.31 09:14:58 4: Ignoring CUL_TX_16
2013.01.31 09:14:58 4: Ignoring CUL_TX_0
2013.01.31 09:14:58 4: Ignoring CUL_TX_31
2013.01.31 09:14:58 4: Ignoring CUL_WS_8
2013.01.31 09:14:58 4: Ignoring CUL_TX_2
2013.01.31 09:14:58 4: Ignoring CUL_WS_4
2013.01.31 09:14:58 4: Ignoring CUL_TX_8
2013.01.31 09:14:58 4: Ignoring CUL_TX_126
2013.01.31 09:14:58 4: Ignoring CUL_WS_7
2013.01.31 09:14:58 4: Ignoring CUL_TX_1
2013.01.31 09:14:58 4: Ignoring CUL_TX_111
2013.01.31 09:14:58 4: Ignoring CUL_TX_117
2013.01.31 09:14:58 4: Ignoring CUL_TX_15
2013.01.31 09:14:58 4: Ignoring CUL_TX_95
2013.01.31 09:14:58 4: Ignoring CUL_TX_32
2013.01.31 09:14:58 4: Ignoring CUL_TX_0
2013.01.31 09:14:58 4: Ignoring CUL_TX_1
2013.01.31 09:14:58 4: Ignoring CUL_TX_111
2013.01.31 09:14:58 4: Ignoring CUL_TX_117
2013.01.31 09:14:58 4: Ignoring CUL_TX_123
2013.01.31 09:14:58 4: Ignoring CUL_TX_126
2013.01.31 09:14:58 4: Ignoring CUL_TX_15
2013.01.31 09:14:58 4: Ignoring CUL_TX_16
2013.01.31 09:14:58 4: Ignoring CUL_TX_2
2013.01.31 09:14:58 4: Ignoring CUL_TX_31
2013.01.31 09:14:58 4: Ignoring CUL_TX_32
2013.01.31 09:14:58 4: Ignoring CUL_TX_4
2013.01.31 09:14:58 4: Ignoring CUL_TX_63
2013.01.31 09:14:58 4: Ignoring CUL_TX_8
2013.01.31 09:14:58 4: Ignoring CUL_TX_95
2013.01.31 09:14:58 4: Ignoring CUL_WS_4
2013.01.31 09:14:58 4: Ignoring CUL_WS_6
2013.01.31 09:14:58 4: Ignoring CUL_WS_7
2013.01.31 09:14:58 4: Ignoring CUL_WS_8
2013.01.31 09:14:58 4: Ignoring FHT_edd1
2013.01.31 09:14:58 4: Ignoring HMS100TF_0000
2013.01.31 09:14:58 5: plotcommand: get FileLog_Max_Bad_Temp Max_Bad_Temp-2013-01.log INT 2013-01-31 2013-01-32 4:desiredTemperature:15.5: 4:.*_Temp.*temperature:15.5: 4:.*_Temp.*humidity:40.5: 4:MAX_.*temperature:15.5: 4:valveposition:0:
2013.01.31 09:14:58 5: Cmd: >get FileLog_Max_Bad_Temp Max_Bad_Temp-2013-01.log INT 2013-01-31 2013-01-32 4:desiredTemperature:15.5: 4:.*_Temp.*temperature:15.5: 4:.*_Temp.*humidity:40.5: 4:MAX_.*temperature:15.5: 4:valveposition:0:<
2013.01.31 09:14:59 4: /fhem?cmd=showlog%20wl_max_bad%20FileLog_Max_Bad_Temp%20tempalles%20Max_Bad_Temp-2013-01.log&pos= / RL: 3507 / image/svg+xml / Content-Encoding: gzip

/
2013.01.31 09:14:59 4: HTTP FHEMWEB:93.114.45.248:50669 GET /fhem/icons/Prev
2013.01.31 09:15:04 4: HTTP FHEMWEB:93.114.45.248:50663 GET /fhem?arg.MAX_Bad=desiredTemperature&dev.MAX_Bad=MAX_Bad&room=MAX&val.MAX_Bad=14.0&arg.MAX_Dach=desiredTemperature&dev.MAX_Dach=MAX_Dach&room=MAX&val.MAX_Dach=14.0&arg.MAX_Kueche=desiredTemperature&dev.MAX_Kueche=MAX_Kueche&room=MAX&val.MAX_Kueche=14.0&arg.Heizung=desiredTemperature&dev.Heizung=Heizung&room=MAX&val.Heizung=auto&cmd.Heizung=set
2013.01.31 09:15:04 5: Cmd: >set Heizung desiredTemperature auto<
2013.01.31 09:15:04 3: Opening ml device 192.168.2.22:62910
2013.01.31 09:15:04 3: ml device opened
2013.01.31 09:15:05 5: Msg H:IEQ0115728,00823c,0111,00000000,09ac42c7,0c,32,0d011f,090f,03,0000
2013.01.31 09:15:05 5: ml dispatch MAX,1,define,00823c,Cube,IEQ0115728,0,1
2013.01.31 09:15:05 5: MAX_Parse MAX,1,define,00823c,Cube,IEQ0115728,0,1
2013.01.31 09:15:05 5: ml dispatch MAX,1,CubeConnectionState,00823c,1
2013.01.31 09:15:05 5: MAX_Parse MAX,1,CubeConnectionState,00823c,1
2013.01.31 09:15:05 5: ml dispatch MAX,1,CubeClockState,00823c,3
2013.01.31 09:15:05 5: MAX_Parse MAX,1,CubeClockState,00823c,3
2013.01.31 09:15:05 5: MAXLAN_Parse: Got hello, connection ip 09ac42c7, duty cycle 0c, freememory 32, clockset 3
2013.01.31 09:15:05 5: Msg M:00,01,VgIGAQZLw7xjaGUBA5cCCkJhZGV6aW1tZXIBCQ0DCURhY2hib2RlbgCA/wQMU2NobGFmemltbWVyAAAABQxLaW5kZXJ6aW1tZXIAAAAGCEhhdXN0w7xyAAAACQEBCQ1JRVEwMTk2MjY2DFRoZXJtb3N0YXQgMQIBAQOXSUVRMDE5NjQzNAxUaGVybW9zdGF0IDEBBAXmaEpFUTA2NDk3MjgOS8O8Y2hlbmZlbnN0ZXIBBQMovUpFUTAwODQ4NjIMRWNvIFRhc3RlciAxAAQF5TNKRVEwNjUwMjM2EEZlbnN0ZXJrb250YWt0IDECBAXmPkpFUTA2NTAwMjEQRmVuc3RlcmtvbnRha3QgMQQEBeXOSkVRMDY1MDA4MBBGZW5zdGVya29udGFrdCAxBQEAgP9JRVEwMTk2NjQ2DFRoZXJtb3N0YXQgMQMEBeYGSkVRMDY1MDE3MxBGZW5zdGVya29udGFrdCAxBgE=
2013.01.31 09:15:05 5: Msg C:00823c,7QCCPAARAf9JRVEwMTE1NzI4AQsABEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAsABEAAAAAAAAAAQQAAAAAAAAAAAAAAAAAAAAAAAAAAAGh0dHA6Ly93d3cubWF4LXBvcnRhbC5lbHYuZGU6ODAvY3ViZQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAENFVAAACgADAAAOEENFU1QAAwACAAAcIA==
2013.01.31 09:15:05 5: MAXLAN_Parse: len 237, addr 00823c, devicetype 0, firmware 1, testresult 255, groupid 17, serial IEQ0115728
2013.01.31 09:15:05 5: ml dispatch MAX,1,define,00823c,Cube,IEQ0115728,17,1
2013.01.31 09:15:05 5: MAX_Parse MAX,1,define,00823c,Cube,IEQ0115728,17,1
2013.01.31 09:15:05 5: ml dispatch MAX,1,Error,00823c
2013.01.31 09:15:05 5: MAX_Parse MAX,1,Error,00823c
2013.01.31 09:15:05 5: Msg C:05e668,EQXmaAQBEw9KRVEwNjQ5NzI4
2013.01.31 09:15:05 5: MAXLAN_Parse: len 17, addr 05e668, devicetype 4, firmware 19, testresult 15, groupid 1, serial JEQ0649728
2013.01.31 09:15:05 5: ml dispatch MAX,1,define,05e668,ShutterContact,JEQ0649728,1,1
2013.01.31 09:15:05 5: MAX_Parse MAX,1,define,05e668,ShutterContact,JEQ0649728,1,1
2013.01.31 09:15:05 5: ml dispatch MAX,1,Error,05e668
2013.01.31 09:15:05 5: MAX_Parse MAX,1,Error,05e668
2013.01.31 09:15:05 5: Msg C:05e5ce,EQXlzgQFEw9KRVEwNjUwMDgw
2013.01.31 09:15:05 5: MAXLAN_Parse: len 17, addr 05e5ce, devicetype 4, firmware 19, testresult 15, groupid 5, serial JEQ0650080
2013.01.31 09:15:05 5: ml dispatch MAX,1,define,05e5ce,ShutterContact,JEQ0650080,5,1
2013.01.31 09:15:05 5: MAX_Parse MAX,1,define,05e5ce,ShutterContact,JEQ0650080,5,1
2013.01.31 09:15:05 5: ml dispatch MAX,1,Error,05e5ce
2013.01.31 09:15:05 5: MAX_Parse MAX,1,Error,05e5ce
2013.01.31 09:15:05 5: Msg C:05e63e,EQXmPgQEEw9KRVEwNjUwMDIx
2013.01.31 09:15:05 5: MAXLAN_Parse: len 17, addr 05e63e, devicetype 4, firmware 19, testresult 15, groupid 4, serial JEQ0650021
2013.01.31 09:15:05 5: ml dispatch MAX,1,define,05e63e,ShutterContact,JEQ0650021,4,1
2013.01.31 09:15:05 5: MAX_Parse MAX,1,define,05e63e,ShutterContact,JEQ0650021,4,1
2013.01.31 09:15:05 5: ml dispatch MAX,1,Error,05e63e
2013.01.31 09:15:05 5: MAX_Parse MAX,1,Error,05e63e
2013.01.31 09:15:05 5: Msg C:0328bd,EQMovQUAEg9KRVEwMDg0ODYy
2013.01.31 09:15:05 5: MAXLAN_Parse: len 17, addr 0328bd, devicetype 5, firmware 18, testresult 15, groupid 0, serial JEQ0084862
2013.01.31 09:15:05 5: ml dispatch MAX,1,define,0328bd,PushButton,JEQ0084862,0,1
2013.01.31 09:15:05 5: MAX_Parse MAX,1,define,0328bd,PushButton,JEQ0084862,0,1
2013.01.31 09:15:05 5: Triggering MAX_TASTER (1 changes)
2013.01.31 09:15:05 5: Notify loop for MAX_TASTER waiting for data
2013.01.31 09:15:05 5: ml dispatch MAX,1,Error,0328bd
2013.01.31 09:15:05 5: MAX_Parse MAX,1,Error,0328bd
2013.01.31 09:15:05 5: Triggering MAX_TASTER (1 changes)
2013.01.31 09:15:05 5: Notify loop for MAX_TASTER waiting for data
2013.01.31 09:15:05 5: Msg C:0080ff,0gCA/wEDFP9JRVEwMTk2NjQ2LBw9CQkYAzAM/wBASEEIQSBBIEEgQSBBIEUgRSBFIEUgRSBFIEBIQQhBIEEgQSBBIEEgRSBFIEUgRSBFIEUgQEhBCEEgQSBBIEEgQSBFIEUgRSBFIEUgRSBASEEIQSBBIEEgQSBBIEUgRSBFIEUgRSBFIEBIQQhBIEEgQSBBIEEgRSBFIEUgRSBFIEUgQEhBCEEgQSBBIEEgQSBFIEUgRSBFIEUgRSBASEEIQSBBIEEgQSBBIEUgRSBFIEUgRSBFIA==
2013.01.31 09:15:05 5: MAXLAN_Parse: len 210, addr 0080ff, devicetype 1, firmware 20, testresult 255, groupid 3, serial IEQ0196646
2013.01.31 09:15:05 5: ml dispatch MAX,1,define,0080ff,HeatingThermostat,IEQ0196646,3,1
2013.01.31 09:15:05 5: MAX_Parse MAX,1,define,0080ff,HeatingThermostat,IEQ0196646,3,1
2013.01.31 09:15:05 5: comfortemp 22, ecotemp 14, boostValve 80, boostDuration 1, tempoffset 1, minsetpointtemp 4.5, maxsetpointtemp 30.5, windowopentemp 12, windowopendur 15
2013.01.31 09:15:05 5: ml dispatch MAX,1,HeatingThermostatConfig,0080ff,14,22,30.5,4.5,80,1,1,12,15,100,0,0,12,4048410841204120412041204120452045204520452045204520404841084120412041204120412045204520452045204520452040484108412041204120412041204520452045204520452045204048410841204120412041204120452045204520452045204520404841084120412041204120412045204520452045204520452040484108412041204120412041204520452045204520452045204048410841204120412041204120452045204520452045204520
2013.01.31 09:15:05 5: MAX_Parse MAX,1,HeatingThermostatConfig,0080ff,14,22,30.5,4.5,80,1,1,12,15,100,0,0,12,4048410841204120412041204120452045204520452045204520404841084120412041204120412045204520452045204520452040484108412041204120412041204520452045204520452045204048410841204120412041204120452045204520452045204520404841084120412041204120412045204520452045204520452040484108412041204120412041204520452045204520452045204048410841204120412041204120452045204520452045204520
2013.01.31 09:15:05 5: ml dispatch MAX,1,Error,0080ff
2013.01.31 09:15:05 5: MAX_Parse MAX,1,Error,0080ff
2013.01.31 09:15:05 5: Msg C:05e533,EQXlMwQCEw9KRVEwNjUwMjM2
2013.01.31 09:15:05 5: MAXLAN_Parse: len 17, addr 05e533, devicetype 4, firmware 19, testresult 15, groupid 2, serial JEQ0650236
2013.01.31 09:15:05 5: ml dispatch MAX,1,define,05e533,ShutterContact,JEQ0650236,2,1
2013.01.31 09:15:05 5: MAX_Parse MAX,1,define,05e533,ShutterContact,JEQ0650236,2,1
2013.01.31 09:15:05 5: ml dispatch MAX,1,Error,05e533
2013.01.31 09:15:05 5: MAX_Parse MAX,1,Error,05e533
2013.01.31 09:15:05 5: Msg C:01090d,0gEJDQECFP9JRVEwMTk2MjY2Lhw9CQUKA1QM/wA8NmB1RP09ID0gPSA9IEUgRSBFIEUgRSBFIDw2YHVE/T0gPSA9ID0gRSBFIEUgRSBFIEUgPDZgbEjTYPA9ID0gPSBFIEUgRSBFIEUgRSA8NmBsSNNg8D0gPSA9IEUgRSBFIEUgRSBFIDw2YGxI02DwPSA9ID0gRSBFIEUgRSBFIEUgPDZgbEjTYPA9ID0gPSBFIEUgRSBFIEUgRSA8NmBsSNNg8D0gPSA9IEUgRSBFIEUgRSBFIA==
2013.01.31 09:15:05 5: MAXLAN_Parse: len 210, addr 01090d, devicetype 1, firmware 20, testresult 255, groupid 2, serial IEQ0196266
2013.01.31 09:15:05 5: ml dispatch MAX,1,define,01090d,HeatingThermostat,IEQ0196266,2,1
2013.01.31 09:15:05 5: MAX_Parse MAX,1,define,01090d,HeatingThermostat,IEQ0196266,2,1
2013.01.31 09:15:05 5: comfortemp 23, ecotemp 14, boostValve 100, boostDuration 2, tempoffset -1, minsetpointtemp 4.5, maxsetpointtemp 30.5, windowopentemp 5, windowopendur 15
2013.01.31 09:15:05 5: ml dispatch MAX,1,HeatingThermostatConfig,01090d,14,23,30.5,4.5,100,2,-1,5,15,100,0,0,12,3c36607544fd3d203d203d203d204520452045204520452045203c36607544fd3d203d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d20452045204520452045204520
2013.01.31 09:15:05 5: MAX_Parse MAX,1,HeatingThermostatConfig,01090d,14,23,30.5,4.5,100,2,-1,5,15,100,0,0,12,3c36607544fd3d203d203d203d204520452045204520452045203c36607544fd3d203d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d20452045204520452045204520
2013.01.31 09:15:05 5: ml dispatch MAX,1,Error,01090d
2013.01.31 09:15:05 5: MAX_Parse MAX,1,Error,01090d
2013.01.31 09:15:05 5: Msg C:010397,0gEDlwEBFP9JRVEwMTk2NDM0Khw9CQUKAzAM/wA8VFxsRM49FT0gPSA9IEUgRSBFIEUgRSBFIDxUXGxEzj0VPSA9ID0gRSBFIEUgRSBFIEUgPFRcbETOPRU9ID0gPSBFIEUgRSBFIEUgRSA8VFxsRM49FT0gPSA9IEUgRSBFIEUgRSBFIDxUXGxEzj0VPSA9ID0gRSBFIEUgRSBFIEUgPFRcbETOPRU9ID0gPSBFIEUgRSBFIEUgRSA8VFxsRM49FT0gPSA9IEUgRSBFIEUgRSBFIA==
2013.01.31 09:15:05 5: MAXLAN_Parse: len 210, addr 010397, devicetype 1, firmware 20, testresult 255, groupid 1, serial IEQ0196434
2013.01.31 09:15:05 5: ml dispatch MAX,1,define,010397,HeatingThermostat,IEQ0196434,1,1
2013.01.31 09:15:05 5: MAX_Parse MAX,1,define,010397,HeatingThermostat,IEQ0196434,1,1
2013.01.31 09:15:05 5: comfortemp 21, ecotemp 14, boostValve 80, boostDuration 1, tempoffset -1, minsetpointtemp 4.5, maxsetpointtemp 30.5, windowopentemp 5, windowopendur 15
2013.01.31 09:15:05 5: ml dispatch MAX,1,HeatingThermostatConfig,010397,14,21,30.5,4.5,80,1,-1,5,15,100,0,0,12,3c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d20452045204520452045204520
2013.01.31 09:15:05 5: MAX_Parse MAX,1,HeatingThermostatConfig,010397,14,21,30.5,4.5,80,1,-1,5,15,100,0,0,12,3c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d20452045204520452045204520
2013.01.31 09:15:05 5: ml dispatch MAX,1,Error,010397
2013.01.31 09:15:05 5: MAX_Parse MAX,1,Error,010397
2013.01.31 09:15:05 5: Msg C:05e606,EQXmBgQGEw9KRVEwNjUwMTcz
2013.01.31 09:15:05 5: MAXLAN_Parse: len 17, addr 05e606, devicetype 4, firmware 19, testresult 15, groupid 6, serial JEQ0650173
2013.01.31 09:15:05 5: ml dispatch MAX,1,define,05e606,ShutterContact,JEQ0650173,6,1
2013.01.31 09:15:05 5: MAX_Parse MAX,1,define,05e606,ShutterContact,JEQ0650173,6,1
2013.01.31 09:15:05 5: ml dispatch MAX,1,Error,05e606
2013.01.31 09:15:05 5: MAX_Parse MAX,1,Error,05e606
2013.01.31 09:15:06 5: Msg L:BgXmaAkSEAYF5c4JEhAGBeY+CRIQBgMovQkSEAsAgP8JEhkAHAAAAAYF5TMJEhALAQkNCRIZABwAAAALAQOXCRIZABwAAAAGBeYGqBIQ
2013.01.31 09:15:06 5: len 6, addr 05e668, initialized 1, valid 1, rferror 0, errframetype 9, answer 0, unkbit (0,0,0)
2013.01.31 09:15:06 5: ml dispatch MAX,1,ShutterContactState,05e668,10
2013.01.31 09:15:06 5: MAX_Parse MAX,1,ShutterContactState,05e668,10
2013.01.31 09:15:06 5: ShutterContact isopen 0, rferror 0, battery 0, unkbits 0
2013.01.31 09:15:06 5: len 6, addr 05e5ce, initialized 1, valid 1, rferror 0, errframetype 9, answer 0, unkbit (0,0,0)
2013.01.31 09:15:06 5: ml dispatch MAX,1,ShutterContactState,05e5ce,10
2013.01.31 09:15:06 5: MAX_Parse MAX,1,ShutterContactState,05e5ce,10
2013.01.31 09:15:06 5: ShutterContact isopen 0, rferror 0, battery 0, unkbits 0
2013.01.31 09:15:06 5: len 6, addr 05e63e, initialized 1, valid 1, rferror 0, errframetype 9, answer 0, unkbit (0,0,0)
2013.01.31 09:15:06 5: ml dispatch MAX,1,ShutterContactState,05e63e,10
2013.01.31 09:15:06 5: MAX_Parse MAX,1,ShutterContactState,05e63e,10
2013.01.31 09:15:06 5: ShutterContact isopen 0, rferror 0, battery 0, unkbits 0
2013.01.31 09:15:06 5: len 6, addr 0328bd, initialized 1, valid 1, rferror 0, errframetype 9, answer 0, unkbit (0,0,0)
2013.01.31 09:15:06 5: ml dispatch MAX,1,PushButtonState,0328bd,10
2013.01.31 09:15:06 5: MAX_Parse MAX,1,PushButtonState,0328bd,10
2013.01.31 09:15:06 5: Triggering MAX_TASTER (2 changes)
2013.01.31 09:15:06 5: Notify loop for MAX_TASTER battery: ok
2013.01.31 09:15:06 5: len 11, addr 0080ff, initialized 1, valid 1, rferror 0, errframetype 9, answer 0, unkbit (0,0,0)
2013.01.31 09:15:06 5: ml dispatch MAX,1,ThermostatState,0080ff,19001c000000
2013.01.31 09:15:06 5: MAX_Parse MAX,1,ThermostatState,0080ff,19001c000000
2013.01.31 09:15:06 5: battery 0, rferror 0, panel 0, langateway 1, dstsetting 1, mode 1, valveposition 0 %, desiredTemperature 14, until , curTemp
2013.01.31 09:15:06 5: len 6, addr 05e533, initialized 1, valid 1, rferror 0, errframetype 9, answer 0, unkbit (0,0,0)
2013.01.31 09:15:06 5: ml dispatch MAX,1,ShutterContactState,05e533,10
2013.01.31 09:15:06 5: MAX_Parse MAX,1,ShutterContactState,05e533,10
2013.01.31 09:15:06 5: ShutterContact isopen 0, rferror 0, battery 0, unkbits 0
2013.01.31 09:15:06 5: len 11, addr 01090d, initialized 1, valid 1, rferror 0, errframetype 9, answer 0, unkbit (0,0,0)
2013.01.31 09:15:06 5: ml dispatch MAX,1,ThermostatState,01090d,19001c000000
2013.01.31 09:15:06 5: MAX_Parse MAX,1,ThermostatState,01090d,19001c000000
2013.01.31 09:15:06 5: battery 0, rferror 0, panel 0, langateway 1, dstsetting 1, mode 1, valveposition 0 %, desiredTemperature 14, until , curTemp
2013.01.31 09:15:06 5: len 11, addr 010397, initialized 1, valid 1, rferror 0, errframetype 9, answer 0, unkbit (0,0,0)
2013.01.31 09:15:06 5: ml dispatch MAX,1,ThermostatState,010397,19001c000000
2013.01.31 09:15:06 5: MAX_Parse MAX,1,ThermostatState,010397,19001c000000
2013.01.31 09:15:06 5: battery 0, rferror 0, panel 0, langateway 1, dstsetting 1, mode 1, valveposition 0 %, desiredTemperature 14, until , curTemp
2013.01.31 09:15:06 5: len 6, addr 05e606, initialized 1, valid 1, rferror 0, errframetype 168, answer 0, unkbit (0,0,0)
2013.01.31 09:15:06 5: ml dispatch MAX,1,ShutterContactState,05e606,10
2013.01.31 09:15:06 5: MAX_Parse MAX,1,ShutterContactState,05e606,10
2013.01.31 09:15:06 5: ShutterContact isopen 0, rferror 0, battery 0, unkbits 0
2013.01.31 09:15:06 5: MAXLAN_SimpleWrite: s:AABAAAAAAQkNAAA=
2013.01.31 09:15:06 5: Msg S:0c,0,31
2013.01.31 09:15:06 5: MAXLAN_Parse: dutycyle 12, freememoryslot 31
2013.01.31 09:15:06 5: MAXLAN_Disconnect
2013.01.31 09:15:06 3: Opening ml device 192.168.2.22:62910
2013.01.31 09:15:06 3: ml device opened
2013.01.31 09:15:08 5: Msg H:IEQ0115728,00823c,0111,00000000,344a96fa,0f,31,0d011f,090f,03,0000
2013.01.31 09:15:08 5: ml dispatch MAX,1,define,00823c,Cube,IEQ0115728,0,1
2013.01.31 09:15:08 5: MAX_Parse MAX,1,define,00823c,Cube,IEQ0115728,0,1
2013.01.31 09:15:08 5: ml dispatch MAX,1,CubeConnectionState,00823c,1
2013.01.31 09:15:08 5: MAX_Parse MAX,1,CubeConnectionState,00823c,1
2013.01.31 09:15:08 5: ml dispatch MAX,1,CubeClockState,00823c,3
2013.01.31 09:15:08 5: MAX_Parse MAX,1,CubeClockState,00823c,3
2013.01.31 09:15:08 5: MAXLAN_Parse: Got hello, connection ip 344a96fa, duty cycle 0f, freememory 31, clockset 3
2013.01.31 09:15:08 5: Msg M:00,01,VgIGAQZLw7xjaGUBA5cCCkJhZGV6aW1tZXIBCQ0DCURhY2hib2RlbgCA/wQMU2NobGFmemltbWVyAAAABQxLaW5kZXJ6aW1tZXIAAAAGCEhhdXN0w7xyAAAACQEBCQ1JRVEwMTk2MjY2DFRoZXJtb3N0YXQgMQIBAQOXSUVRMDE5NjQzNAxUaGVybW9zdGF0IDEBBAXmaEpFUTA2NDk3MjgOS8O8Y2hlbmZlbnN0ZXIBBQMovUpFUTAwODQ4NjIMRWNvIFRhc3RlciAxAAQF5TNKRVEwNjUwMjM2EEZlbnN0ZXJrb250YWt0IDECBAXmPkpFUTA2NTAwMjEQRmVuc3RlcmtvbnRha3QgMQQEBeXOSkVRMDY1MDA4MBBGZW5zdGVya29udGFrdCAxBQEAgP9JRVEwMTk2NjQ2DFRoZXJtb3N0YXQgMQMEBeYGSkVRMDY1MDE3MxBGZW5zdGVya29udGFrdCAxBgE=
2013.01.31 09:15:08 5: Msg C:00823c,7QCCPAARAf9JRVEwMTE1NzI4AQsABEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAsABEAAAAAAAAAAQQAAAAAAAAAAAAAAAAAAAAAAAAAAAGh0dHA6Ly93d3cubWF4LXBvcnRhbC5lbHYuZGU6ODAvY3ViZQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAENFVAAACgADAAAOEENFU1QAAwACAAAcIA==
2013.01.31 09:15:08 5: MAXLAN_Parse: len 237, addr 00823c, devicetype 0, firmware 1, testresult 255, groupid 17, serial IEQ0115728
2013.01.31 09:15:08 5: ml dispatch MAX,1,define,00823c,Cube,IEQ0115728,17,1
2013.01.31 09:15:08 5: MAX_Parse MAX,1,define,00823c,Cube,IEQ0115728,17,1
2013.01.31 09:15:08 5: ml dispatch MAX,1,Error,00823c
2013.01.31 09:15:08 5: MAX_Parse MAX,1,Error,00823c
2013.01.31 09:15:08 5: Msg C:05e668,EQXmaAQBEw9KRVEwNjQ5NzI4
2013.01.31 09:15:08 5: MAXLAN_Parse: len 17, addr 05e668, devicetype 4, firmware 19, testresult 15, groupid 1, serial JEQ0649728
2013.01.31 09:15:08 5: ml dispatch MAX,1,define,05e668,ShutterContact,JEQ0649728,1,1
2013.01.31 09:15:08 5: MAX_Parse MAX,1,define,05e668,ShutterContact,JEQ0649728,1,1
2013.01.31 09:15:08 5: ml dispatch MAX,1,Error,05e668
2013.01.31 09:15:08 5: MAX_Parse MAX,1,Error,05e668
2013.01.31 09:15:08 5: Msg C:05e5ce,EQXlzgQFEw9KRVEwNjUwMDgw
2013.01.31 09:15:08 5: MAXLAN_Parse: len 17, addr 05e5ce, devicetype 4, firmware 19, testresult 15, groupid 5, serial JEQ0650080
2013.01.31 09:15:08 5: ml dispatch MAX,1,define,05e5ce,ShutterContact,JEQ0650080,5,1
2013.01.31 09:15:08 5: MAX_Parse MAX,1,define,05e5ce,ShutterContact,JEQ0650080,5,1
2013.01.31 09:15:08 5: ml dispatch MAX,1,Error,05e5ce
2013.01.31 09:15:08 5: MAX_Parse MAX,1,Error,05e5ce
2013.01.31 09:15:08 5: Msg C:05e63e,EQXmPgQEEw9KRVEwNjUwMDIx
2013.01.31 09:15:08 5: MAXLAN_Parse: len 17, addr 05e63e, devicetype 4, firmware 19, testresult 15, groupid 4, serial JEQ0650021
2013.01.31 09:15:08 5: ml dispatch MAX,1,define,05e63e,ShutterContact,JEQ0650021,4,1
2013.01.31 09:15:08 5: MAX_Parse MAX,1,define,05e63e,ShutterContact,JEQ0650021,4,1
2013.01.31 09:15:08 5: ml dispatch MAX,1,Error,05e63e
2013.01.31 09:15:08 5: MAX_Parse MAX,1,Error,05e63e
2013.01.31 09:15:08 5: Msg C:0328bd,EQMovQUAEg9KRVEwMDg0ODYy
2013.01.31 09:15:08 5: MAXLAN_Parse: len 17, addr 0328bd, devicetype 5, firmware 18, testresult 15, groupid 0, serial JEQ0084862
2013.01.31 09:15:08 5: ml dispatch MAX,1,define,0328bd,PushButton,JEQ0084862,0,1
2013.01.31 09:15:08 5: MAX_Parse MAX,1,define,0328bd,PushButton,JEQ0084862,0,1
2013.01.31 09:15:08 5: Triggering MAX_TASTER (1 changes)
2013.01.31 09:15:08 5: Notify loop for MAX_TASTER waiting for data
2013.01.31 09:15:08 5: ml dispatch MAX,1,Error,0328bd
2013.01.31 09:15:08 5: MAX_Parse MAX,1,Error,0328bd
2013.01.31 09:15:08 5: Triggering MAX_TASTER (1 changes)
2013.01.31 09:15:08 5: Notify loop for MAX_TASTER waiting for data
2013.01.31 09:15:08 5: Msg C:0080ff,0gCA/wEDFP9JRVEwMTk2NjQ2LBw9CQkYAzAM/wBASEEIQSBBIEEgQSBBIEUgRSBFIEUgRSBFIEBIQQhBIEEgQSBBIEEgRSBFIEUgRSBFIEUgQEhBCEEgQSBBIEEgQSBFIEUgRSBFIEUgRSBASEEIQSBBIEEgQSBBIEUgRSBFIEUgRSBFIEBIQQhBIEEgQSBBIEEgRSBFIEUgRSBFIEUgQEhBCEEgQSBBIEEgQSBFIEUgRSBFIEUgRSBASEEIQSBBIEEgQSBBIEUgRSBFIEUgRSBFIA==
2013.01.31 09:15:08 5: MAXLAN_Parse: len 210, addr 0080ff, devicetype 1, firmware 20, testresult 255, groupid 3, serial IEQ0196646
2013.01.31 09:15:08 5: ml dispatch MAX,1,define,0080ff,HeatingThermostat,IEQ0196646,3,1
2013.01.31 09:15:08 5: MAX_Parse MAX,1,define,0080ff,HeatingThermostat,IEQ0196646,3,1
2013.01.31 09:15:08 5: comfortemp 22, ecotemp 14, boostValve 80, boostDuration 1, tempoffset 1, minsetpointtemp 4.5, maxsetpointtemp 30.5, windowopentemp 12, windowopendur 15
2013.01.31 09:15:08 5: ml dispatch MAX,1,HeatingThermostatConfig,0080ff,14,22,30.5,4.5,80,1,1,12,15,100,0,0,12,4048410841204120412041204120452045204520452045204520404841084120412041204120412045204520452045204520452040484108412041204120412041204520452045204520452045204048410841204120412041204120452045204520452045204520404841084120412041204120412045204520452045204520452040484108412041204120412041204520452045204520452045204048410841204120412041204120452045204520452045204520
2013.01.31 09:15:08 5: MAX_Parse MAX,1,HeatingThermostatConfig,0080ff,14,22,30.5,4.5,80,1,1,12,15,100,0,0,12,4048410841204120412041204120452045204520452045204520404841084120412041204120412045204520452045204520452040484108412041204120412041204520452045204520452045204048410841204120412041204120452045204520452045204520404841084120412041204120412045204520452045204520452040484108412041204120412041204520452045204520452045204048410841204120412041204120452045204520452045204520
2013.01.31 09:15:08 5: ml dispatch MAX,1,Error,0080ff
2013.01.31 09:15:08 5: MAX_Parse MAX,1,Error,0080ff
2013.01.31 09:15:08 5: Msg C:05e533,EQXlMwQCEw9KRVEwNjUwMjM2
2013.01.31 09:15:08 5: MAXLAN_Parse: len 17, addr 05e533, devicetype 4, firmware 19, testresult 15, groupid 2, serial JEQ0650236
2013.01.31 09:15:08 5: ml dispatch MAX,1,define,05e533,ShutterContact,JEQ0650236,2,1
2013.01.31 09:15:08 5: MAX_Parse MAX,1,define,05e533,ShutterContact,JEQ0650236,2,1
2013.01.31 09:15:08 5: ml dispatch MAX,1,Error,05e533
2013.01.31 09:15:08 5: MAX_Parse MAX,1,Error,05e533
2013.01.31 09:15:08 5: Msg C:01090d,0gEJDQECFP9JRVEwMTk2MjY2Lhw9CQUKA1QM/wA8NmB1RP09ID0gPSA9IEUgRSBFIEUgRSBFIDw2YHVE/T0gPSA9ID0gRSBFIEUgRSBFIEUgPDZgbEjTYPA9ID0gPSBFIEUgRSBFIEUgRSA8NmBsSNNg8D0gPSA9IEUgRSBFIEUgRSBFIDw2YGxI02DwPSA9ID0gRSBFIEUgRSBFIEUgPDZgbEjTYPA9ID0gPSBFIEUgRSBFIEUgRSA8NmBsSNNg8D0gPSA9IEUgRSBFIEUgRSBFIA==
2013.01.31 09:15:08 5: MAXLAN_Parse: len 210, addr 01090d, devicetype 1, firmware 20, testresult 255, groupid 2, serial IEQ0196266
2013.01.31 09:15:08 5: ml dispatch MAX,1,define,01090d,HeatingThermostat,IEQ0196266,2,1
2013.01.31 09:15:08 5: MAX_Parse MAX,1,define,01090d,HeatingThermostat,IEQ0196266,2,1
2013.01.31 09:15:08 5: comfortemp 23, ecotemp 14, boostValve 100, boostDuration 2, tempoffset -1, minsetpointtemp 4.5, maxsetpointtemp 30.5, windowopentemp 5, windowopendur 15
2013.01.31 09:15:08 5: ml dispatch MAX,1,HeatingThermostatConfig,01090d,14,23,30.5,4.5,100,2,-1,5,15,100,0,0,12,3c36607544fd3d203d203d203d204520452045204520452045203c36607544fd3d203d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d20452045204520452045204520
2013.01.31 09:15:08 5: MAX_Parse MAX,1,HeatingThermostatConfig,01090d,14,23,30.5,4.5,100,2,-1,5,15,100,0,0,12,3c36607544fd3d203d203d203d204520452045204520452045203c36607544fd3d203d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d20452045204520452045204520
2013.01.31 09:15:08 5: ml dispatch MAX,1,Error,01090d
2013.01.31 09:15:08 5: MAX_Parse MAX,1,Error,01090d
2013.01.31 09:15:08 5: Msg C:010397,0gEDlwEBFP9JRVEwMTk2NDM0Khw9CQUKAzAM/wA8VFxsRM49FT0gPSA9IEUgRSBFIEUgRSBFIDxUXGxEzj0VPSA9ID0gRSBFIEUgRSBFIEUgPFRcbETOPRU9ID0gPSBFIEUgRSBFIEUgRSA8VFxsRM49FT0gPSA9IEUgRSBFIEUgRSBFIDxUXGxEzj0VPSA9ID0gRSBFIEUgRSBFIEUgPFRcbETOPRU9ID0gPSBFIEUgRSBFIEUgRSA8VFxsRM49FT0gPSA9IEUgRSBFIEUgRSBFIA==
2013.01.31 09:15:08 5: MAXLAN_Parse: len 210, addr 010397, devicetype 1, firmware 20, testresult 255, groupid 1, serial IEQ0196434
2013.01.31 09:15:08 5: ml dispatch MAX,1,define,010397,HeatingThermostat,IEQ0196434,1,1
2013.01.31 09:15:08 5: MAX_Parse MAX,1,define,010397,HeatingThermostat,IEQ0196434,1,1
2013.01.31 09:15:08 5: comfortemp 21, ecotemp 14, boostValve 80, boostDuration 1, tempoffset -1, minsetpointtemp 4.5, maxsetpointtemp 30.5, windowopentemp 5, windowopendur 15
2013.01.31 09:15:08 5: ml dispatch MAX,1,HeatingThermostatConfig,010397,14,21,30.5,4.5,80,1,-1,5,15,100,0,0,12,3c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d20452045204520452045204520
2013.01.31 09:15:08 5: MAX_Parse MAX,1,HeatingThermostatConfig,010397,14,21,30.5,4.5,80,1,-1,5,15,100,0,0,12,3c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d20452045204520452045204520
2013.01.31 09:15:08 5: ml dispatch MAX,1,Error,010397
2013.01.31 09:15:08 5: MAX_Parse MAX,1,Error,010397
2013.01.31 09:15:08 5: Msg C:05e606,EQXmBgQGEw9KRVEwNjUwMTcz
2013.01.31 09:15:08 5: MAXLAN_Parse: len 17, addr 05e606, devicetype 4, firmware 19, testresult 15, groupid 6, serial JEQ0650173
2013.01.31 09:15:08 5: ml dispatch MAX,1,define,05e606,ShutterContact,JEQ0650173,6,1
2013.01.31 09:15:08 5: MAX_Parse MAX,1,define,05e606,ShutterContact,JEQ0650173,6,1
2013.01.31 09:15:08 5: ml dispatch MAX,1,Error,05e606
2013.01.31 09:15:08 5: MAX_Parse MAX,1,Error,05e606
2013.01.31 09:15:09 5: Msg L:BgXmaAkSEAYF5c4JEhAGBeY+CRIQBgMovQkSEAsAgP8JEhkAHAAAAAYF5TMJEhALAQkNCRIZABwAAAALAQOXCRIZABwAAAAGBeYGqBIQ
2013.01.31 09:15:09 5: len 6, addr 05e668, initialized 1, valid 1, rferror 0, errframetype 9, answer 0, unkbit (0,0,0)
2013.01.31 09:15:09 5: ml dispatch MAX,1,ShutterContactState,05e668,10
2013.01.31 09:15:09 5: MAX_Parse MAX,1,ShutterContactState,05e668,10
2013.01.31 09:15:09 5: ShutterContact isopen 0, rferror 0, battery 0, unkbits 0
2013.01.31 09:15:09 5: len 6, addr 05e5ce, initialized 1, valid 1, rferror 0, errframetype 9, answer 0, unkbit (0,0,0)
2013.01.31 09:15:09 5: ml dispatch MAX,1,ShutterContactState,05e5ce,10
2013.01.31 09:15:09 5: MAX_Parse MAX,1,ShutterContactState,05e5ce,10
2013.01.31 09:15:09 5: ShutterContact isopen 0, rferror 0, battery 0, unkbits 0
2013.01.31 09:15:09 5: len 6, addr 05e63e, initialized 1, valid 1, rferror 0, errframetype 9, answer 0, unkbit (0,0,0)
2013.01.31 09:15:09 5: ml dispatch MAX,1,ShutterContactState,05e63e,10
2013.01.31 09:15:09 5: MAX_Parse MAX,1,ShutterContactState,05e63e,10
2013.01.31 09:15:09 5: ShutterContact isopen 0, rferror 0, battery 0, unkbits 0
2013.01.31 09:15:09 5: len 6, addr 0328bd, initialized 1, valid 1, rferror 0, errframetype 9, answer 0, unkbit (0,0,0)
2013.01.31 09:15:09 5: ml dispatch MAX,1,PushButtonState,0328bd,10
2013.01.31 09:15:09 5: MAX_Parse MAX,1,PushButtonState,0328bd,10
2013.01.31 09:15:09 5: Triggering MAX_TASTER (2 changes)
2013.01.31 09:15:09 5: Notify loop for MAX_TASTER battery: ok
2013.01.31 09:15:09 5: len 11, addr 0080ff, initialized 1, valid 1, rferror 0, errframetype 9, answer 0, unkbit (0,0,0)
2013.01.31 09:15:09 5: ml dispatch MAX,1,ThermostatState,0080ff,19001c000000
2013.01.31 09:15:09 5: MAX_Parse MAX,1,ThermostatState,0080ff,19001c000000
2013.01.31 09:15:09 5: battery 0, rferror 0, panel 0, langateway 1, dstsetting 1, mode 1, valveposition 0 %, desiredTemperature 14, until , curTemp
2013.01.31 09:15:09 5: len 6, addr 05e533, initialized 1, valid 1, rferror 0, errframetype 9, answer 0, unkbit (0,0,0)
2013.01.31 09:15:09 5: ml dispatch MAX,1,ShutterContactState,05e533,10
2013.01.31 09:15:09 5: MAX_Parse MAX,1,ShutterContactState,05e533,10
2013.01.31 09:15:09 5: ShutterContact isopen 0, rferror 0, battery 0, unkbits 0
2013.01.31 09:15:09 5: len 11, addr 01090d, initialized 1, valid 1, rferror 0, errframetype 9, answer 0, unkbit (0,0,0)
2013.01.31 09:15:09 5: ml dispatch MAX,1,ThermostatState,01090d,19001c000000
2013.01.31 09:15:09 5: MAX_Parse MAX,1,ThermostatState,01090d,19001c000000
2013.01.31 09:15:09 5: battery 0, rferror 0, panel 0, langateway 1, dstsetting 1, mode 1, valveposition 0 %, desiredTemperature 14, until , curTemp
2013.01.31 09:15:09 5: len 11, addr 010397, initialized 1, valid 1, rferror 0, errframetype 9, answer 0, unkbit (0,0,0)
2013.01.31 09:15:09 5: ml dispatch MAX,1,ThermostatState,010397,19001c000000
2013.01.31 09:15:09 5: MAX_Parse MAX,1,ThermostatState,010397,19001c000000
2013.01.31 09:15:09 5: battery 0, rferror 0, panel 0, langateway 1, dstsetting 1, mode 1, valveposition 0 %, desiredTemperature 14, until , curTemp
2013.01.31 09:15:09 5: len 6, addr 05e606, initialized 1, valid 1, rferror 0, errframetype 168, answer 0, unkbit (0,0,0)
2013.01.31 09:15:09 5: ml dispatch MAX,1,ShutterContactState,05e606,10
2013.01.31 09:15:09 5: MAX_Parse MAX,1,ShutterContactState,05e606,10
2013.01.31 09:15:09 5: ShutterContact isopen 0, rferror 0, battery 0, unkbits 0
2013.01.31 09:15:09 5: MAXLAN_SimpleWrite: s:AABAAAAAAID/AAA=
2013.01.31 09:15:09 5: Msg S:0f,0,30
2013.01.31 09:15:09 5: MAXLAN_Parse: dutycyle 15, freememoryslot 30
2013.01.31 09:15:09 5: MAXLAN_Disconnect
2013.01.31 09:15:09 3: Opening ml device 192.168.2.22:62910
2013.01.31 09:15:09 3: ml device opened
2013.01.31 09:15:11 5: Msg H:IEQ0115728,00823c,0111,00000000,1ef4eb36,12,31,0d011f,090f,03,0000
2013.01.31 09:15:11 5: ml dispatch MAX,1,define,00823c,Cube,IEQ0115728,0,1
2013.01.31 09:15:11 5: MAX_Parse MAX,1,define,00823c,Cube,IEQ0115728,0,1
2013.01.31 09:15:11 5: ml dispatch MAX,1,CubeConnectionState,00823c,1
2013.01.31 09:15:11 5: MAX_Parse MAX,1,CubeConnectionState,00823c,1
2013.01.31 09:15:11 5: ml dispatch MAX,1,CubeClockState,00823c,3
2013.01.31 09:15:11 5: MAX_Parse MAX,1,CubeClockState,00823c,3
2013.01.31 09:15:11 5: MAXLAN_Parse: Got hello, connection ip 1ef4eb36, duty cycle 12, freememory 31, clockset 3
2013.01.31 09:15:11 5: Msg M:00,01,VgIGAQZLw7xjaGUBA5cCCkJhZGV6aW1tZXIBCQ0DCURhY2hib2RlbgCA/wQMU2NobGFmemltbWVyAAAABQxLaW5kZXJ6aW1tZXIAAAAGCEhhdXN0w7xyAAAACQEBCQ1JRVEwMTk2MjY2DFRoZXJtb3N0YXQgMQIBAQOXSUVRMDE5NjQzNAxUaGVybW9zdGF0IDEBBAXmaEpFUTA2NDk3MjgOS8O8Y2hlbmZlbnN0ZXIBBQMovUpFUTAwODQ4NjIMRWNvIFRhc3RlciAxAAQF5TNKRVEwNjUwMjM2EEZlbnN0ZXJrb250YWt0IDECBAXmPkpFUTA2NTAwMjEQRmVuc3RlcmtvbnRha3QgMQQEBeXOSkVRMDY1MDA4MBBGZW5zdGVya29udGFrdCAxBQEAgP9JRVEwMTk2NjQ2DFRoZXJtb3N0YXQgMQMEBeYGSkVRMDY1MDE3MxBGZW5zdGVya29udGFrdCAxBgE=
2013.01.31 09:15:11 5: Msg C:00823c,7QCCPAARAf9JRVEwMTE1NzI4AQsABEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAsABEAAAAAAAAAAQQAAAAAAAAAAAAAAAAAAAAAAAAAAAGh0dHA6Ly93d3cubWF4LXBvcnRhbC5lbHYuZGU6ODAvY3ViZQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAENFVAAACgADAAAOEENFU1QAAwACAAAcIA==
2013.01.31 09:15:11 5: MAXLAN_Parse: len 237, addr 00823c, devicetype 0, firmware 1, testresult 255, groupid 17, serial IEQ0115728
2013.01.31 09:15:11 5: ml dispatch MAX,1,define,00823c,Cube,IEQ0115728,17,1
2013.01.31 09:15:11 5: MAX_Parse MAX,1,define,00823c,Cube,IEQ0115728,17,1
2013.01.31 09:15:11 5: ml dispatch MAX,1,Error,00823c
2013.01.31 09:15:11 5: MAX_Parse MAX,1,Error,00823c
2013.01.31 09:15:11 5: Msg C:05e668,EQXmaAQBEw9KRVEwNjQ5NzI4
2013.01.31 09:15:11 5: MAXLAN_Parse: len 17, addr 05e668, devicetype 4, firmware 19, testresult 15, groupid 1, serial JEQ0649728
2013.01.31 09:15:11 5: ml dispatch MAX,1,define,05e668,ShutterContact,JEQ0649728,1,1
2013.01.31 09:15:11 5: MAX_Parse MAX,1,define,05e668,ShutterContact,JEQ0649728,1,1
2013.01.31 09:15:11 5: ml dispatch MAX,1,Error,05e668
2013.01.31 09:15:11 5: MAX_Parse MAX,1,Error,05e668
2013.01.31 09:15:11 5: Msg C:05e5ce,EQXlzgQFEw9KRVEwNjUwMDgw
2013.01.31 09:15:11 5: MAXLAN_Parse: len 17, addr 05e5ce, devicetype 4, firmware 19, testresult 15, groupid 5, serial JEQ0650080
2013.01.31 09:15:11 5: ml dispatch MAX,1,define,05e5ce,ShutterContact,JEQ0650080,5,1
2013.01.31 09:15:11 5: MAX_Parse MAX,1,define,05e5ce,ShutterContact,JEQ0650080,5,1
2013.01.31 09:15:11 5: ml dispatch MAX,1,Error,05e5ce
2013.01.31 09:15:11 5: MAX_Parse MAX,1,Error,05e5ce
2013.01.31 09:15:11 5: Msg C:05e63e,EQXmPgQEEw9KRVEwNjUwMDIx
2013.01.31 09:15:11 5: MAXLAN_Parse: len 17, addr 05e63e, devicetype 4, firmware 19, testresult 15, groupid 4, serial JEQ0650021
2013.01.31 09:15:11 5: ml dispatch MAX,1,define,05e63e,ShutterContact,JEQ0650021,4,1
2013.01.31 09:15:11 5: MAX_Parse MAX,1,define,05e63e,ShutterContact,JEQ0650021,4,1
2013.01.31 09:15:11 5: ml dispatch MAX,1,Error,05e63e
2013.01.31 09:15:11 5: MAX_Parse MAX,1,Error,05e63e
2013.01.31 09:15:11 5: Msg C:0328bd,EQMovQUAEg9KRVEwMDg0ODYy
2013.01.31 09:15:11 5: MAXLAN_Parse: len 17, addr 0328bd, devicetype 5, firmware 18, testresult 15, groupid 0, serial JEQ0084862
2013.01.31 09:15:11 5: ml dispatch MAX,1,define,0328bd,PushButton,JEQ0084862,0,1
2013.01.31 09:15:11 5: MAX_Parse MAX,1,define,0328bd,PushButton,JEQ0084862,0,1
2013.01.31 09:15:11 5: Triggering MAX_TASTER (1 changes)
2013.01.31 09:15:11 5: Notify loop for MAX_TASTER waiting for data
2013.01.31 09:15:11 5: ml dispatch MAX,1,Error,0328bd
2013.01.31 09:15:11 5: MAX_Parse MAX,1,Error,0328bd
2013.01.31 09:15:11 5: Triggering MAX_TASTER (1 changes)
2013.01.31 09:15:11 5: Notify loop for MAX_TASTER waiting for data
2013.01.31 09:15:11 5: Msg C:0080ff,0gCA/wEDFP9JRVEwMTk2NjQ2LBw9CQkYAzAM/wBASEEIQSBBIEEgQSBBIEUgRSBFIEUgRSBFIEBIQQhBIEEgQSBBIEEgRSBFIEUgRSBFIEUgQEhBCEEgQSBBIEEgQSBFIEUgRSBFIEUgRSBASEEIQSBBIEEgQSBBIEUgRSBFIEUgRSBFIEBIQQhBIEEgQSBBIEEgRSBFIEUgRSBFIEUgQEhBCEEgQSBBIEEgQSBFIEUgRSBFIEUgRSBASEEIQSBBIEEgQSBBIEUgRSBFIEUgRSBFIA==
2013.01.31 09:15:11 5: MAXLAN_Parse: len 210, addr 0080ff, devicetype 1, firmware 20, testresult 255, groupid 3, serial IEQ0196646
2013.01.31 09:15:11 5: ml dispatch MAX,1,define,0080ff,HeatingThermostat,IEQ0196646,3,1
2013.01.31 09:15:11 5: MAX_Parse MAX,1,define,0080ff,HeatingThermostat,IEQ0196646,3,1
2013.01.31 09:15:11 5: comfortemp 22, ecotemp 14, boostValve 80, boostDuration 1, tempoffset 1, minsetpointtemp 4.5, maxsetpointtemp 30.5, windowopentemp 12, windowopendur 15
2013.01.31 09:15:11 5: ml dispatch MAX,1,HeatingThermostatConfig,0080ff,14,22,30.5,4.5,80,1,1,12,15,100,0,0,12,4048410841204120412041204120452045204520452045204520404841084120412041204120412045204520452045204520452040484108412041204120412041204520452045204520452045204048410841204120412041204120452045204520452045204520404841084120412041204120412045204520452045204520452040484108412041204120412041204520452045204520452045204048410841204120412041204120452045204520452045204520
2013.01.31 09:15:11 5: MAX_Parse MAX,1,HeatingThermostatConfig,0080ff,14,22,30.5,4.5,80,1,1,12,15,100,0,0,12,4048410841204120412041204120452045204520452045204520404841084120412041204120412045204520452045204520452040484108412041204120412041204520452045204520452045204048410841204120412041204120452045204520452045204520404841084120412041204120412045204520452045204520452040484108412041204120412041204520452045204520452045204048410841204120412041204120452045204520452045204520
2013.01.31 09:15:11 5: ml dispatch MAX,1,Error,0080ff
2013.01.31 09:15:11 5: MAX_Parse MAX,1,Error,0080ff
2013.01.31 09:15:11 5: Msg C:05e533,EQXlMwQCEw9KRVEwNjUwMjM2
2013.01.31 09:15:11 5: MAXLAN_Parse: len 17, addr 05e533, devicetype 4, firmware 19, testresult 15, groupid 2, serial JEQ0650236
2013.01.31 09:15:11 5: ml dispatch MAX,1,define,05e533,ShutterContact,JEQ0650236,2,1
2013.01.31 09:15:11 5: MAX_Parse MAX,1,define,05e533,ShutterContact,JEQ0650236,2,1
2013.01.31 09:15:11 5: ml dispatch MAX,1,Error,05e533
2013.01.31 09:15:11 5: MAX_Parse MAX,1,Error,05e533
2013.01.31 09:15:11 5: Msg C:01090d,0gEJDQECFP9JRVEwMTk2MjY2Lhw9CQUKA1QM/wA8NmB1RP09ID0gPSA9IEUgRSBFIEUgRSBFIDw2YHVE/T0gPSA9ID0gRSBFIEUgRSBFIEUgPDZgbEjTYPA9ID0gPSBFIEUgRSBFIEUgRSA8NmBsSNNg8D0gPSA9IEUgRSBFIEUgRSBFIDw2YGxI02DwPSA9ID0gRSBFIEUgRSBFIEUgPDZgbEjTYPA9ID0gPSBFIEUgRSBFIEUgRSA8NmBsSNNg8D0gPSA9IEUgRSBFIEUgRSBFIA==
2013.01.31 09:15:11 5: MAXLAN_Parse: len 210, addr 01090d, devicetype 1, firmware 20, testresult 255, groupid 2, serial IEQ0196266
2013.01.31 09:15:11 5: ml dispatch MAX,1,define,01090d,HeatingThermostat,IEQ0196266,2,1
2013.01.31 09:15:11 5: MAX_Parse MAX,1,define,01090d,HeatingThermostat,IEQ0196266,2,1
2013.01.31 09:15:11 5: comfortemp 23, ecotemp 14, boostValve 100, boostDuration 2, tempoffset -1, minsetpointtemp 4.5, maxsetpointtemp 30.5, windowopentemp 5, windowopendur 15
2013.01.31 09:15:11 5: ml dispatch MAX,1,HeatingThermostatConfig,01090d,14,23,30.5,4.5,100,2,-1,5,15,100,0,0,12,3c36607544fd3d203d203d203d204520452045204520452045203c36607544fd3d203d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d20452045204520452045204520
2013.01.31 09:15:11 5: MAX_Parse MAX,1,HeatingThermostatConfig,01090d,14,23,30.5,4.5,100,2,-1,5,15,100,0,0,12,3c36607544fd3d203d203d203d204520452045204520452045203c36607544fd3d203d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d20452045204520452045204520
2013.01.31 09:15:11 5: ml dispatch MAX,1,Error,01090d
2013.01.31 09:15:11 5: MAX_Parse MAX,1,Error,01090d
2013.01.31 09:15:11 5: Msg C:010397,0gEDlwEBFP9JRVEwMTk2NDM0Khw9CQUKAzAM/wA8VFxsRM49FT0gPSA9IEUgRSBFIEUgRSBFIDxUXGxEzj0VPSA9ID0gRSBFIEUgRSBFIEUgPFRcbETOPRU9ID0gPSBFIEUgRSBFIEUgRSA8VFxsRM49FT0gPSA9IEUgRSBFIEUgRSBFIDxUXGxEzj0VPSA9ID0gRSBFIEUgRSBFIEUgPFRcbETOPRU9ID0gPSBFIEUgRSBFIEUgRSA8VFxsRM49FT0gPSA9IEUgRSBFIEUgRSBFIA==
2013.01.31 09:15:11 5: MAXLAN_Parse: len 210, addr 010397, devicetype 1, firmware 20, testresult 255, groupid 1, serial IEQ0196434
2013.01.31 09:15:11 5: ml dispatch MAX,1,define,010397,HeatingThermostat,IEQ0196434,1,1
2013.01.31 09:15:11 5: MAX_Parse MAX,1,define,010397,HeatingThermostat,IEQ0196434,1,1
2013.01.31 09:15:11 5: comfortemp 21, ecotemp 14, boostValve 80, boostDuration 1, tempoffset -1, minsetpointtemp 4.5, maxsetpointtemp 30.5, windowopentemp 5, windowopendur 15
2013.01.31 09:15:11 5: ml dispatch MAX,1,HeatingThermostatConfig,010397,14,21,30.5,4.5,80,1,-1,5,15,100,0,0,12,3c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d20452045204520452045204520
2013.01.31 09:15:11 5: MAX_Parse MAX,1,HeatingThermostatConfig,010397,14,21,30.5,4.5,80,1,-1,5,15,100,0,0,12,3c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d20452045204520452045204520
2013.01.31 09:15:11 5: ml dispatch MAX,1,Error,010397
2013.01.31 09:15:11 5: MAX_Parse MAX,1,Error,010397
2013.01.31 09:15:11 5: Msg C:05e606,EQXmBgQGEw9KRVEwNjUwMTcz
2013.01.31 09:15:11 5: MAXLAN_Parse: len 17, addr 05e606, devicetype 4, firmware 19, testresult 15, groupid 6, serial JEQ0650173
2013.01.31 09:15:11 5: ml dispatch MAX,1,define,05e606,ShutterContact,JEQ0650173,6,1
2013.01.31 09:15:11 5: MAX_Parse MAX,1,define,05e606,ShutterContact,JEQ0650173,6,1
2013.01.31 09:15:11 5: ml dispatch MAX,1,Error,05e606
2013.01.31 09:15:11 5: MAX_Parse MAX,1,Error,05e606
2013.01.31 09:15:12 5: Msg L:BgXmaAkSEAYF5c4JEhAGBeY+CRIQBgMovQkSEAsAgP8JEhkAHAAAAAYF5TMJEhALAQkNCRIYAAAAAAALAQOXCRIZABwAAAAGBeYGqBIQ
2013.01.31 09:15:12 5: len 6, addr 05e668, initialized 1, valid 1, rferror 0, errframetype 9, answer 0, unkbit (0,0,0)
2013.01.31 09:15:12 5: ml dispatch MAX,1,ShutterContactState,05e668,10
2013.01.31 09:15:12 5: MAX_Parse MAX,1,ShutterContactState,05e668,10
2013.01.31 09:15:12 5: ShutterContact isopen 0, rferror 0, battery 0, unkbits 0
2013.01.31 09:15:12 5: len 6, addr 05e5ce, initialized 1, valid 1, rferror 0, errframetype 9, answer 0, unkbit (0,0,0)
2013.01.31 09:15:12 5: ml dispatch MAX,1,ShutterContactState,05e5ce,10
2013.01.31 09:15:12 5: MAX_Parse MAX,1,ShutterContactState,05e5ce,10
2013.01.31 09:15:12 5: ShutterContact isopen 0, rferror 0, battery 0, unkbits 0
2013.01.31 09:15:12 5: len 6, addr 05e63e, initialized 1, valid 1, rferror 0, errframetype 9, answer 0, unkbit (0,0,0)
2013.01.31 09:15:12 5: ml dispatch MAX,1,ShutterContactState,05e63e,10
2013.01.31 09:15:12 5: MAX_Parse MAX,1,ShutterContactState,05e63e,10
2013.01.31 09:15:12 5: ShutterContact isopen 0, rferror 0, battery 0, unkbits 0
2013.01.31 09:15:12 5: len 6, addr 0328bd, initialized 1, valid 1, rferror 0, errframetype 9, answer 0, unkbit (0,0,0)
2013.01.31 09:15:12 5: ml dispatch MAX,1,PushButtonState,0328bd,10
2013.01.31 09:15:12 5: MAX_Parse MAX,1,PushButtonState,0328bd,10
2013.01.31 09:15:12 5: Triggering MAX_TASTER (2 changes)
2013.01.31 09:15:12 5: Notify loop for MAX_TASTER battery: ok
2013.01.31 09:15:12 5: len 11, addr 0080ff, initialized 1, valid 1, rferror 0, errframetype 9, answer 0, unkbit (0,0,0)
2013.01.31 09:15:12 5: ml dispatch MAX,1,ThermostatState,0080ff,19001c000000
2013.01.31 09:15:12 5: MAX_Parse MAX,1,ThermostatState,0080ff,19001c000000
2013.01.31 09:15:12 5: battery 0, rferror 0, panel 0, langateway 1, dstsetting 1, mode 1, valveposition 0 %, desiredTemperature 14, until , curTemp
2013.01.31 09:15:12 5: len 6, addr 05e533, initialized 1, valid 1, rferror 0, errframetype 9, answer 0, unkbit (0,0,0)
2013.01.31 09:15:12 5: ml dispatch MAX,1,ShutterContactState,05e533,10
2013.01.31 09:15:12 5: MAX_Parse MAX,1,ShutterContactState,05e533,10
2013.01.31 09:15:12 5: ShutterContact isopen 0, rferror 0, battery 0, unkbits 0
2013.01.31 09:15:12 5: len 11, addr 01090d, initialized 1, valid 1, rferror 0, errframetype 9, answer 0, unkbit (0,0,0)
2013.01.31 09:15:12 5: ml dispatch MAX,1,ThermostatState,01090d,180000000000
2013.01.31 09:15:12 5: MAX_Parse MAX,1,ThermostatState,01090d,180000000000
2013.01.31 09:15:12 5: battery 0, rferror 0, panel 0, langateway 1, dstsetting 1, mode 0, valveposition 0 %, desiredTemperature 0, until , curTemp
2013.01.31 09:15:12 5: Triggering MAX_Bad (3 changes)
2013.01.31 09:15:12 5: Notify loop for MAX_Bad mode: auto
2013.01.31 09:15:12 5: Update structure 'Heizung' to undefined because device MAX_Bad has changed
2013.01.31 09:15:12 5: Triggering Heizung (1 changes)
2013.01.31 09:15:12 5: Notify loop for Heizung undefined
2013.01.31 09:15:12 5: len 11, addr 010397, initialized 1, valid 1, rferror 0, errframetype 9, answer 0, unkbit (0,0,0)
2013.01.31 09:15:12 5: ml dispatch MAX,1,ThermostatState,010397,19001c000000
2013.01.31 09:15:12 5: MAX_Parse MAX,1,ThermostatState,010397,19001c000000
2013.01.31 09:15:12 5: battery 0, rferror 0, panel 0, langateway 1, dstsetting 1, mode 1, valveposition 0 %, desiredTemperature 14, until , curTemp
2013.01.31 09:15:12 5: len 6, addr 05e606, initialized 1, valid 1, rferror 0, errframetype 168, answer 0, unkbit (0,0,0)
2013.01.31 09:15:12 5: ml dispatch MAX,1,ShutterContactState,05e606,10
2013.01.31 09:15:12 5: MAX_Parse MAX,1,ShutterContactState,05e606,10
2013.01.31 09:15:12 5: ShutterContact isopen 0, rferror 0, battery 0, unkbits 0
2013.01.31 09:15:12 5: MAXLAN_SimpleWrite: s:AABAAAAAAQOXAAA=
2013.01.31 09:15:12 5: Msg S:12,0,30
2013.01.31 09:15:12 5: MAXLAN_Parse: dutycyle 18, freememoryslot 30
2013.01.31 09:15:12 5: MAXLAN_Disconnect
2013.01.31 09:15:12 5: CUL/RAW: /tA06065065621

tAE6063063021

2013.01.31 09:15:12 5: CUL: tA060650656 -57.5
2013.01.31 09:15:12 5: CUL dispatch TXA060650656
2013.01.31 09:15:12 4: CUL_TX Keller_Temp 48 (XA060650656)
2013.01.31 09:15:12 4: CUL_TX temperature Keller_Temp 48 T: 15.0 F: 0
2013.01.31 09:15:12 5: Triggering Keller_Temp (2 changes)
2013.01.31 09:15:12 5: Notify loop for Keller_Temp T: 15.0 H: 63.0
2013.01.31 09:15:12 5: CUL: tAE60630630 -57.5
2013.01.31 09:15:12 5: CUL dispatch TXAE60630630
2013.01.31 09:15:12 4: CUL_TX Keller_Temp 48 (XAE60630630)
2013.01.31 09:15:12 4: CUL_TX humidity Keller_Temp 48 H: 63.0 F: 0
2013.01.31 09:15:12 5: Triggering Keller_Temp (2 changes)
2013.01.31 09:15:12 5: Notify loop for Keller_Temp T: 15.0 H: 63.0
2013.01.31 09:15:12 5: exec at command Job_AnwesendChris
2013.01.31 09:15:12 5: Cmd: >{ \
my $zeit = 20; \
use Net::Ping; \
my $ip = "192.168.2.50"; \
my $p = Net::Ping->new("icmp", 9, 64); \
my $pingtest = $p->ping($ip); \
my $cn = Value("count_chris"); \
my $n = $zeit-1; \
if ($pingtest && $cn != 0) { \
fhem("set count_chris 0"); \
} \
if ($pingtest && ($value{Anwesenheit_Chris} eq "off")) { \
fhem("set Anwesenheit_Chris on"); \
fhem("set count_chris 0"); \
} \
elsif (!($pingtest) && $value{Anwesenheit_Chris} eq "on") { \
if ($cn == 0) { \
fhem("set count_chris 1"); \
} \
elsif ($cn != 0 && $cn < $n){ \
$cn=$cn+1; \
fhem("set count_chris ".$cn); \
} \
elsif ($cn == $n){ \
fhem("set count_chris 0"); \
fhem("set Anwesenheit_Chris off"); \
} \
} \
}<
2013.01.31 09:15:21 5: Triggering global (1 changes)
2013.01.31 09:15:21 5: Notify loop for global DELETED Job_AnwesendChris
2013.01.31 09:15:21 5: redefine at command Job_AnwesendChris as +*00:00:30 { \
my $zeit = 20; \
use Net::Ping; \
my $ip = "192.168.2.50"; \
my $p = Net::Ping->new("icmp", 9, 64); \
my $pingtest = $p->ping($ip); \
my $cn = Value("count_chris"); \
my $n = $zeit-1; \
if ($pingtest && $cn != 0) { \
fhem("set count_chris 0"); \
} \
if ($pingtest && ($value{Anwesenheit_Chris} eq "off")) { \
fhem("set Anwesenheit_Chris on"); \
fhem("set count_chris 0"); \
} \
elsif (!($pingtest) && $value{Anwesenheit_Chris} eq "on") { \
if ($cn == 0) { \
fhem("set count_chris 1"); \
} \
elsif ($cn != 0 && $cn < $n){ \
$cn=$cn+1; \
fhem("set count_chris ".$cn); \
} \
elsif ($cn == $n){ \
fhem("set count_chris 0"); \
fhem("set Anwesenheit_Chris off"); \
} \
} \
}
2013.01.31 09:15:21 5: Triggering global (1 changes)
2013.01.31 09:15:21 5: Notify loop for global DEFINED Job_AnwesendChris
2013.01.31 09:15:29 1: FHEMWEB SSL/HTTPS error:
2013.01.31 09:15:29 5: CUL/RAW: /tA01472572632

tAE1549049832

tA02971171620

tAE2855055620

tA0AB75375A05

tA0FA7167180C

tAEFA60060C0C

2013.01.31 09:15:29 5: CUL: tA014725726 -49
2013.01.31 09:15:29 5: CUL dispatch TXA014725726
2013.01.31 09:15:29 4: CUL_TX WZ_Temp 10 (XA014725726)
2013.01.31 09:15:29 4: CUL_TX temperature WZ_Temp 10 T: 22.5 F: 0
2013.01.31 09:15:29 5: Triggering WZ_Temp (2 changes)
2013.01.31 09:15:29 5: Notify loop for WZ_Temp T: 22.5 H: 49.0
2013.01.31 09:15:29 5: CUL: tAE15490498 -49
2013.01.31 09:15:29 5: CUL dispatch TXAE15490498
2013.01.31 09:15:29 4: CUL_TX WZ_Temp 10 (XAE15490498)
2013.01.31 09:15:29 4: CUL_TX humidity WZ_Temp 10 H: 49.0 F: 1
2013.01.31 09:15:29 5: Triggering WZ_Temp (2 changes)
2013.01.31 09:15:29 5: Notify loop for WZ_Temp T: 22.5 H: 49.0
2013.01.31 09:15:29 5: CUL: tA029711716 -58
2013.01.31 09:15:29 5: CUL dispatch TXA029711716
2013.01.31 09:15:29 4: CUL_TX KZ_Temp 20 (XA029711716)
2013.01.31 09:15:29 4: CUL_TX temperature KZ_Temp 20 T: 21.1 F: 1
2013.01.31 09:15:29 5: Triggering KZ_Temp (2 changes)
2013.01.31 09:15:29 5: Notify loop for KZ_Temp T: 21.1 H: 55.0
2013.01.31 09:15:29 5: CUL: tAE28550556 -58
2013.01.31 09:15:29 5: CUL dispatch TXAE28550556
2013.01.31 09:15:29 4: CUL_TX KZ_Temp 20 (XAE28550556)
2013.01.31 09:15:29 4: CUL_TX humidity KZ_Temp 20 H: 55.0 F: 0
2013.01.31 09:15:29 5: Triggering KZ_Temp (2 changes)
2013.01.31 09:15:29 5: Notify loop for KZ_Temp T: 21.1 H: 55.0
2013.01.31 09:15:29 5: CUL: tA0AB75375A -71.5
2013.01.31 09:15:29 5: CUL dispatch TXA0AB75375A
2013.01.31 09:15:29 4: CUL_TX Temp_Aqua 85 (XA0AB75375A)
2013.01.31 09:15:29 4: CUL_TX temperature Temp_Aqua 85 T: 25.3 F: 1
2013.01.31 09:15:29 5: Triggering Temp_Aqua (2 changes)
2013.01.31 09:15:29 5: Notify loop for Temp_Aqua T: 25.3 H: 0
2013.01.31 09:15:29 5: CUL: tA0FA716718 -68
2013.01.31 09:15:29 5: CUL dispatch TXA0FA716718
2013.01.31 09:15:29 5: Triggering Bad_Temp (2 changes)
2013.01.31 09:15:29 5: Notify loop for Bad_Temp T: 21.6 H: 62.0
2013.01.31 09:15:29 5: CUL: tAEFA60060C -68
2013.01.31 09:15:29 5: CUL dispatch TXAEFA60060C
2013.01.31 09:15:29 5: Triggering Bad_Temp (2 changes)
2013.01.31 09:15:29 5: Notify loop for Bad_Temp T: 21.6 H: 62.0
2013.01.31 09:15:29 3: Opening ml device 192.168.2.22:62910
2013.01.31 09:15:29 3: ml device opened
2013.01.31 09:15:29 5: Msg H:IEQ0115728,00823c,0111,00000000,5abe28aa,17,32,0d011f,090f,03,0000
2013.01.31 09:15:29 5: ml dispatch MAX,1,define,00823c,Cube,IEQ0115728,0,1
2013.01.31 09:15:29 5: MAX_Parse MAX,1,define,00823c,Cube,IEQ0115728,0,1
2013.01.31 09:15:29 5: ml dispatch MAX,1,CubeConnectionState,00823c,1
2013.01.31 09:15:29 5: MAX_Parse MAX,1,CubeConnectionState,00823c,1
2013.01.31 09:15:29 5: ml dispatch MAX,1,CubeClockState,00823c,3
2013.01.31 09:15:29 5: MAX_Parse MAX,1,CubeClockState,00823c,3
2013.01.31 09:15:29 5: MAXLAN_Parse: Got hello, connection ip 5abe28aa, duty cycle 17, freememory 32, clockset 3
2013.01.31 09:15:29 5: Msg M:00,01,VgIGAQZLw7xjaGUBA5cCCkJhZGV6aW1tZXIBCQ0DCURhY2hib2RlbgCA/wQMU2NobGFmemltbWVyAAAABQxLaW5kZXJ6aW1tZXIAAAAGCEhhdXN0w7xyAAAACQEBCQ1JRVEwMTk2MjY2DFRoZXJtb3N0YXQgMQIBAQOXSUVRMDE5NjQzNAxUaGVybW9zdGF0IDEBBAXmaEpFUTA2NDk3MjgOS8O8Y2hlbmZlbnN0ZXIBBQMovUpFUTAwODQ4NjIMRWNvIFRhc3RlciAxAAQF5TNKRVEwNjUwMjM2EEZlbnN0ZXJrb250YWt0IDECBAXmPkpFUTA2NTAwMjEQRmVuc3RlcmtvbnRha3QgMQQEBeXOSkVRMDY1MDA4MBBGZW5zdGVya29udGFrdCAxBQEAgP9JRVEwMTk2NjQ2DFRoZXJtb3N0YXQgMQMEBeYGSkVRMDY1MDE3MxBGZW5zdGVya29udGFrdCAxBgE=
2013.01.31 09:15:30 5: Msg C:00823c,7QCCPAARAf9JRVEwMTE1NzI4AQsABEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAsABEAAAAAAAAAAQQAAAAAAAAAAAAAAAAAAAAAAAAAAAGh0dHA6Ly93d3cubWF4LXBvcnRhbC5lbHYuZGU6ODAvY3ViZQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAENFVAAACgADAAAOEENFU1QAAwACAAAcIA==
2013.01.31 09:15:30 5: MAXLAN_Parse: len 237, addr 00823c, devicetype 0, firmware 1, testresult 255, groupid 17, serial IEQ0115728
2013.01.31 09:15:30 5: ml dispatch MAX,1,define,00823c,Cube,IEQ0115728,17,1
2013.01.31 09:15:30 5: MAX_Parse MAX,1,define,00823c,Cube,IEQ0115728,17,1
2013.01.31 09:15:30 5: ml dispatch MAX,1,Error,00823c
2013.01.31 09:15:30 5: MAX_Parse MAX,1,Error,00823c
2013.01.31 09:15:30 5: Msg C:05e668,EQXmaAQBEw9KRVEwNjQ5NzI4
2013.01.31 09:15:30 5: MAXLAN_Parse: len 17, addr 05e668, devicetype 4, firmware 19, testresult 15, groupid 1, serial JEQ0649728
2013.01.31 09:15:30 5: ml dispatch MAX,1,define,05e668,ShutterContact,JEQ0649728,1,1
2013.01.31 09:15:30 5: MAX_Parse MAX,1,define,05e668,ShutterContact,JEQ0649728,1,1
2013.01.31 09:15:30 5: ml dispatch MAX,1,Error,05e668
2013.01.31 09:15:30 5: MAX_Parse MAX,1,Error,05e668
2013.01.31 09:15:30 5: Msg C:05e5ce,EQXlzgQFEw9KRVEwNjUwMDgw
2013.01.31 09:15:30 5: MAXLAN_Parse: len 17, addr 05e5ce, devicetype 4, firmware 19, testresult 15, groupid 5, serial JEQ0650080
2013.01.31 09:15:30 5: ml dispatch MAX,1,define,05e5ce,ShutterContact,JEQ0650080,5,1
2013.01.31 09:15:30 5: MAX_Parse MAX,1,define,05e5ce,ShutterContact,JEQ0650080,5,1
2013.01.31 09:15:30 5: ml dispatch MAX,1,Error,05e5ce
2013.01.31 09:15:30 5: MAX_Parse MAX,1,Error,05e5ce
2013.01.31 09:15:30 5: Msg C:05e63e,EQXmPgQEEw9KRVEwNjUwMDIx
2013.01.31 09:15:30 5: MAXLAN_Parse: len 17, addr 05e63e, devicetype 4, firmware 19, testresult 15, groupid 4, serial JEQ0650021
2013.01.31 09:15:30 5: ml dispatch MAX,1,define,05e63e,ShutterContact,JEQ0650021,4,1
2013.01.31 09:15:30 5: MAX_Parse MAX,1,define,05e63e,ShutterContact,JEQ0650021,4,1
2013.01.31 09:15:30 5: ml dispatch MAX,1,Error,05e63e
2013.01.31 09:15:30 5: MAX_Parse MAX,1,Error,05e63e
2013.01.31 09:15:30 5: Msg C:0328bd,EQMovQUAEg9KRVEwMDg0ODYy
2013.01.31 09:15:30 5: MAXLAN_Parse: len 17, addr 0328bd, devicetype 5, firmware 18, testresult 15, groupid 0, serial JEQ0084862
2013.01.31 09:15:30 5: ml dispatch MAX,1,define,0328bd,PushButton,JEQ0084862,0,1
2013.01.31 09:15:30 5: MAX_Parse MAX,1,define,0328bd,PushButton,JEQ0084862,0,1
2013.01.31 09:15:30 5: Triggering MAX_TASTER (1 changes)
2013.01.31 09:15:30 5: Notify loop for MAX_TASTER waiting for data
2013.01.31 09:15:30 5: ml dispatch MAX,1,Error,0328bd
2013.01.31 09:15:30 5: MAX_Parse MAX,1,Error,0328bd
2013.01.31 09:15:30 5: Triggering MAX_TASTER (1 changes)
2013.01.31 09:15:30 5: Notify loop for MAX_TASTER waiting for data
2013.01.31 09:15:30 5: Msg C:0080ff,0gCA/wEDFP9JRVEwMTk2NjQ2LBw9CQkYAzAM/wBASEEIQSBBIEEgQSBBIEUgRSBFIEUgRSBFIEBIQQhBIEEgQSBBIEEgRSBFIEUgRSBFIEUgQEhBCEEgQSBBIEEgQSBFIEUgRSBFIEUgRSBASEEIQSBBIEEgQSBBIEUgRSBFIEUgRSBFIEBIQQhBIEEgQSBBIEEgRSBFIEUgRSBFIEUgQEhBCEEgQSBBIEEgQSBFIEUgRSBFIEUgRSBASEEIQSBBIEEgQSBBIEUgRSBFIEUgRSBFIA==
2013.01.31 09:15:30 5: MAXLAN_Parse: len 210, addr 0080ff, devicetype 1, firmware 20, testresult 255, groupid 3, serial IEQ0196646
2013.01.31 09:15:30 5: ml dispatch MAX,1,define,0080ff,HeatingThermostat,IEQ0196646,3,1
2013.01.31 09:15:30 5: MAX_Parse MAX,1,define,0080ff,HeatingThermostat,IEQ0196646,3,1
2013.01.31 09:15:30 5: comfortemp 22, ecotemp 14, boostValve 80, boostDuration 1, tempoffset 1, minsetpointtemp 4.5, maxsetpointtemp 30.5, windowopentemp 12, windowopendur 15
2013.01.31 09:15:30 5: ml dispatch MAX,1,HeatingThermostatConfig,0080ff,14,22,30.5,4.5,80,1,1,12,15,100,0,0,12,4048410841204120412041204120452045204520452045204520404841084120412041204120412045204520452045204520452040484108412041204120412041204520452045204520452045204048410841204120412041204120452045204520452045204520404841084120412041204120412045204520452045204520452040484108412041204120412041204520452045204520452045204048410841204120412041204120452045204520452045204520
2013.01.31 09:15:30 5: MAX_Parse MAX,1,HeatingThermostatConfig,0080ff,14,22,30.5,4.5,80,1,1,12,15,100,0,0,12,4048410841204120412041204120452045204520452045204520404841084120412041204120412045204520452045204520452040484108412041204120412041204520452045204520452045204048410841204120412041204120452045204520452045204520404841084120412041204120412045204520452045204520452040484108412041204120412041204520452045204520452045204048410841204120412041204120452045204520452045204520
2013.01.31 09:15:30 5: ml dispatch MAX,1,Error,0080ff
2013.01.31 09:15:30 5: MAX_Parse MAX,1,Error,0080ff
2013.01.31 09:15:30 5: Msg C:05e533,EQXlMwQCEw9KRVEwNjUwMjM2
2013.01.31 09:15:30 5: MAXLAN_Parse: len 17, addr 05e533, devicetype 4, firmware 19, testresult 15, groupid 2, serial JEQ0650236
2013.01.31 09:15:30 5: ml dispatch MAX,1,define,05e533,ShutterContact,JEQ0650236,2,1
2013.01.31 09:15:30 5: MAX_Parse MAX,1,define,05e533,ShutterContact,JEQ0650236,2,1
2013.01.31 09:15:30 5: ml dispatch MAX,1,Error,05e533
2013.01.31 09:15:30 5: MAX_Parse MAX,1,Error,05e533
2013.01.31 09:15:30 5: Msg C:01090d,0gEJDQECFP9JRVEwMTk2MjY2Lhw9CQUKA1QM/wA8NmB1RP09ID0gPSA9IEUgRSBFIEUgRSBFIDw2YHVE/T0gPSA9ID0gRSBFIEUgRSBFIEUgPDZgbEjTYPA9ID0gPSBFIEUgRSBFIEUgRSA8NmBsSNNg8D0gPSA9IEUgRSBFIEUgRSBFIDw2YGxI02DwPSA9ID0gRSBFIEUgRSBFIEUgPDZgbEjTYPA9ID0gPSBFIEUgRSBFIEUgRSA8NmBsSNNg8D0gPSA9IEUgRSBFIEUgRSBFIA==
2013.01.31 09:15:30 5: MAXLAN_Parse: len 210, addr 01090d, devicetype 1, firmware 20, testresult 255, groupid 2, serial IEQ0196266
2013.01.31 09:15:30 5: ml dispatch MAX,1,define,01090d,HeatingThermostat,IEQ0196266,2,1
2013.01.31 09:15:30 5: MAX_Parse MAX,1,define,01090d,HeatingThermostat,IEQ0196266,2,1
2013.01.31 09:15:30 5: comfortemp 23, ecotemp 14, boostValve 100, boostDuration 2, tempoffset -1, minsetpointtemp 4.5, maxsetpointtemp 30.5, windowopentemp 5, windowopendur 15
2013.01.31 09:15:30 5: ml dispatch MAX,1,HeatingThermostatConfig,01090d,14,23,30.5,4.5,100,2,-1,5,15,100,0,0,12,3c36607544fd3d203d203d203d204520452045204520452045203c36607544fd3d203d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d20452045204520452045204520
2013.01.31 09:15:30 5: MAX_Parse MAX,1,HeatingThermostatConfig,01090d,14,23,30.5,4.5,100,2,-1,5,15,100,0,0,12,3c36607544fd3d203d203d203d204520452045204520452045203c36607544fd3d203d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d204520452045204520452045203c36606c48d360f03d203d203d20452045204520452045204520
2013.01.31 09:15:30 5: ml dispatch MAX,1,Error,01090d
2013.01.31 09:15:30 5: MAX_Parse MAX,1,Error,01090d
2013.01.31 09:15:30 5: Msg C:010397,0gEDlwEBFP9JRVEwMTk2NDM0Khw9CQUKAzAM/wA8VFxsRM49FT0gPSA9IEUgRSBFIEUgRSBFIDxUXGxEzj0VPSA9ID0gRSBFIEUgRSBFIEUgPFRcbETOPRU9ID0gPSBFIEUgRSBFIEUgRSA8VFxsRM49FT0gPSA9IEUgRSBFIEUgRSBFIDxUXGxEzj0VPSA9ID0gRSBFIEUgRSBFIEUgPFRcbETOPRU9ID0gPSBFIEUgRSBFIEUgRSA8VFxsRM49FT0gPSA9IEUgRSBFIEUgRSBFIA==
2013.01.31 09:15:30 5: MAXLAN_Parse: len 210, addr 010397, devicetype 1, firmware 20, testresult 255, groupid 1, serial IEQ0196434
2013.01.31 09:15:30 5: ml dispatch MAX,1,define,010397,HeatingThermostat,IEQ0196434,1,1
2013.01.31 09:15:30 5: MAX_Parse MAX,1,define,010397,HeatingThermostat,IEQ0196434,1,1
2013.01.31 09:15:30 5: comfortemp 21, ecotemp 14, boostValve 80, boostDuration 1, tempoffset -1, minsetpointtemp 4.5, maxsetpointtemp 30.5, windowopentemp 5, windowopendur 15
2013.01.31 09:15:30 5: ml dispatch MAX,1,HeatingThermostatConfig,010397,14,21,30.5,4.5,80,1,-1,5,15,100,0,0,12,3c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d20452045204520452045204520
2013.01.31 09:15:30 5: MAX_Parse MAX,1,HeatingThermostatConfig,010397,14,21,30.5,4.5,80,1,-1,5,15,100,0,0,12,3c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d204520452045204520452045203c545c6c44ce3d153d203d203d20452045204520452045204520
2013.01.31 09:15:30 5: ml dispatch MAX,1,Error,010397
2013.01.31 09:15:30 5: MAX_Parse MAX,1,Error,010397
2013.01.31 09:15:30 5: Msg C:05e606,EQXmBgQGEw9KRVEwNjUwMTcz
2013.01.31 09:15:30 5: MAXLAN_Parse: len 17, addr 05e606, devicetype 4, firmware 19, testresult 15, groupid 6, serial JEQ0650173
2013.01.31 09:15:30 5: ml dispatch MAX,1,define,05e606,ShutterContact,JEQ0650173,6,1
2013.01.31 09:15:30 5: MAX_Parse MAX,1,define,05e606,ShutterContact,JEQ0650173,6,1
2013.01.31 09:15:30 5: ml dispatch MAX,1,Error,05e606
2013.01.31 09:15:30 5: MAX_Parse MAX,1,Error,05e606
2013.01.31 09:15:30 5: Msg L:BgXmaAkSEAYF5c4JEhAGBeY+CRIQBgMovQkSEAsAgP8JEhgAHAAAAAYF5TMJEhALAQkNCRIYAAAAAAALAQOXCRIYABwAAAAGBeYGqBIQ
2013.01.31 09:15:30 5: len 6, addr 05e668, initialized 1, valid 1, rferror 0, errframetype 9, answer 0, unkbit (0,0,0)
2013.01.31 09:15:30 5: ml dispatch MAX,1,ShutterContactState,05e668,10
2013.01.31 09:15:30 5: MAX_Parse MAX,1,ShutterContactState,05e668,10
2013.01.31 09:15:30 5: ShutterContact isopen 0, rferror 0, battery 0, unkbits 0
2013.01.31 09:15:30 5: len 6, addr 05e5ce, initialized 1, valid 1, rferror 0, errframetype 9, answer 0, unkbit (0,0,0)
2013.01.31 09:15:30 5: ml dispatch MAX,1,ShutterContactState,05e5ce,10
2013.01.31 09:15:30 5: MAX_Parse MAX,1,ShutterContactState,05e5ce,10
2013.01.31 09:15:30 5: ShutterContact isopen 0, rferror 0, battery 0, unkbits 0
2013.01.31 09:15:30 5: len 6, addr 05e63e, initialized 1, valid 1, rferror 0, errframetype 9, answer 0, unkbit (0,0,0)
2013.01.31 09:15:30 5: ml dispatch MAX,1,ShutterContactState,05e63e,10
2013.01.31 09:15:30 5: MAX_Parse MAX,1,ShutterContactState,05e63e,10
2013.01.31 09:15:30 5: ShutterContact isopen 0, rferror 0, battery 0, unkbits 0
2013.01.31 09:15:30 5: len 6, addr 0328bd, initialized 1, valid 1, rferror 0, errframetype 9, answer 0, unkbit (0,0,0)
2013.01.31 09:15:30 5: ml dispatch MAX,1,PushButtonState,0328bd,10
2013.01.31 09:15:30 5: MAX_Parse MAX,1,PushButtonState,0328bd,10
2013.01.31 09:15:30 5: Triggering MAX_TASTER (2 changes)
2013.01.31 09:15:30 5: Notify loop for MAX_TASTER battery: ok
2013.01.31 09:15:30 5: len 11, addr 0080ff, initialized 1, valid 1, rferror 0, errframetype 9, answer 0, unkbit (0,0,0)
2013.01.31 09:15:30 5: ml dispatch MAX,1,ThermostatState,0080ff,18001c000000
2013.01.31 09:15:30 5: MAX_Parse MAX,1,ThermostatState,0080ff,18001c000000
2013.01.31 09:15:30 5: battery 0,

teggi · 31 Januar 2013, 15:51:29

Ich habe das gleiche Problem.

Jedesmal, wenn ich eine neue "desiredTemperature" setzte, bekomme ich folgenden Log-Eintrag:
2013-01-31_14:51:51 THERMO.KIZ1 desiredTemperature: 0.0

Kurz darauf meldet sich das MAX-Thermostat dann mit der korrekten "desiredTemperature".

Der EventMonitor spuckt das hier aus, wenn die den "set"-Befehl (auf 17.0) absetze:
2013-01-31 15:50:20 MAX THERMO.KIZ1 desiredTemperature 17.0
2013-01-31 15:50:21 MAX THERMO.KIZ1 desiredTemperature: 0.0
2013-01-31 15:50:21 MAX THERMO.KIZ1 0.0 °C

teggi · 01 Februar 2013, 13:38:27

Nach dem neusten Update des MAX-Moduls gibt es jetzt einen neuen Logeintrag bei set desiredTemperature, die vielleicht ganz aufschlussreich sein könnte:

2013.02.01 13:29:28 2: Invalid WallThermostatState packet
Use of uninitialized value $desiredTemperature in bitwise and (&) at ./FHEM/10_MAX.pm line 565.

Wie gesagt, die desiredTemperature wird anscheinend korrekt im Thermostat gesetzt und bei der nächsten Runde meldet sich das Thermostat wieder mit den richtigen Werten.
Nur, wenn der "set" Befehl abgesetzt wird kommt von irgendowher die Message:
2013-02-01 13:29:28 MAX THERMO.KIZ1 desiredTemperature: 0.0
2013-02-01 13:29:28 MAX THERMO.KIZ1 0.0 °C

Matthias Gehre · 03 Februar 2013, 09:07:39

Das scheint ein anderer Fehler zu sein,
der original Fehler trat ja bei den Heizkörperthermostaten auf.

Kannst du nochmal einen Log dazu machen? (Es reichen ca. 10 Zeilen vor dem Fehler)
"Invalid WallThermostatState packet"
weißt darauf hin, dass es noch eine Art von WallThermostatState
gibt, die wir bisher noch nicht hatten.

teggi · 03 Februar 2013, 19:15:25

Interessant!

Ich bin die nächste Woche allerdings unterwegs. Ich poste mal ein Log sobald ich wieder zurück bin.

ChrisW · 04 Februar 2013, 09:35:16

ich muss sagen seit 2 Tagen kein 0c Problem mehr. Hoffen wird mal das der Fehler weg ist :D
Hab aber auch FHEM öfters neu gestartet ..

teggi · 08 Februar 2013, 09:45:05

So, jetzt habe ich auch mal mein Log auf verbose 5 gestellt.

Hier ist der relevante Auszug aus dem Log, wenn ich die "desiredTemperature" neu setze und das "Invalid WallThermostatState packet" kriege.

Zitat2013.02.08 09:38:23 4: HTTP FHEMWEB:192.168.178.201:50447 GET /fhem?arg.THERMO.KIZ1=desiredTemperature&dev.THERMO.KIZ1=THERMO.KIZ1&room=KIZ.1&val.THERMO.KIZ1=17.0&cmd.THERMO.KIZ1=set
2013.02.08 09:38:23 5: Cmd: >set THERMO.KIZ1 desiredTemperature 17.0<
2013.02.08 09:38:23 5: CUL_0 sending Zs0bdc004012345602af3e0062
2013.02.08 09:38:23 5: SW: Zs0bdc004012345602af3e0062
2013.02.08 09:38:23 5: Triggering THERMO.KIZ1 (1 changes)
2013.02.08 09:38:23 5: Notify loop for THERMO.KIZ1 desiredTemperature 17.0
2013.02.08 09:38:23 4: HTTP FHEMWEB:192.168.178.201:50447 GET /fhem?room=KIZ.1
2013.02.08 09:38:23 4: /fhem?room=KIZ.1 / RL: 1851 / text/html; charset=UTF-8 / Content-Encoding: gzip
/
2013.02.08 09:38:24 4: HTTP FHEMWEB:192.168.178.201:50447 GET /fhem/css/style.css
2013.02.08 09:38:24 4: HTTP FHEMWEB:192.168.178.201:50452 GET /fhem/js/fhemweb.js
2013.02.08 09:38:24 4: HTTP FHEMWEB:192.168.178.201:50449 GET /fhem/js/svg.js
2013.02.08 09:38:24 4: HTTP FHEMWEB:192.168.178.201:50447 GET /fhem?cmd=showlog%20wl_0%20FileLog_THERMO.KIZ1%20mytemp4max%20THERMO.KIZ1-2013.log&pos=
2013.02.08 09:38:24 5: plotcommand: get FileLog_THERMO.KIZ1 THERMO.KIZ1-2013.log INT 2013-02-08 2013-02-09 4:desiredTemperature:4.5:$fld[3]==0.0?17:$fld[3] 4:temperature:4.5:
2013.02.08 09:38:24 5: Cmd: >get FileLog_THERMO.KIZ1 THERMO.KIZ1-2013.log INT 2013-02-08 2013-02-09 4:desiredTemperature:4.5:$fld[3]==0.0?17:$fld[3] 4:temperature:4.5:<
2013.02.08 09:38:25 4: /fhem?cmd=showlog%20wl_0%20FileLog_THERMO.KIZ1%20mytemp4max%20THERMO.KIZ1-2013.log&pos= / RL: 3108 / image/svg+xml / Content-Encoding: gzip
/
2013.02.08 09:38:25 4: HTTP FHEMWEB:192.168.178.201:50453 GET /fhem/icons/on
2013.02.08 09:38:25 4: HTTP FHEMWEB:192.168.178.201:50452 GET /fhem/icons/off
2013.02.08 09:38:25 5: CUL/RAW: /Z0EDC020202AF3E12345600011904220E

2013.02.08 09:38:25 5: CUL_0: Z0EDC020202AF3E1234560001190422 -67
2013.02.08 09:38:25 5: CUL_0 dispatch Z0EDC020202AF3E1234560001190422
2013.02.08 09:38:25 5: CUL_MAX_Parse: len 14, msgcnt DC, msgflag 02, msgTypeRaw Ack, src 02af3e, dst 123456, groupid 0, payload 01190422
2013.02.08 09:38:25 5: cm dispatch MAX,1,Ack,02af3e,01190422
2013.02.08 09:38:25 5: MAX_Parse MAX,1,Ack,02af3e,01190422
2013.02.08 09:38:25 5: MAX_Parse MAX,1,WallThermostatState,02af3e,190422
2013.02.08 09:38:25 2: Invalid WallThermostatState packet
2013.02.08 09:38:25 5: desiredTemperature 0
2013.02.08 09:38:25 5: Triggering THERMO.KIZ1 (2 changes)
2013.02.08 09:38:25 5: Notify loop for THERMO.KIZ1 desiredTemperature: 0.0
2013.02.08 09:38:25 5: Got matching ack
2013.02.08 09:38:25 4: HTTP FHEMWEB:192.168.178.201:50449 GET /fhem?cmd=showlog%20wl_1%20FileLog_SW.HEIZUNG.KIZ1%20myHMSw%20SW.HEIZUNG.KIZ1-2013.log&pos=
2013.02.08 09:38:25 5: plotcommand: get FileLog_SW.HEIZUNG.KIZ1 SW.HEIZUNG.KIZ1-2013.log INT 2013-02-08 2013-02-09 3::0:$fld[2]=~"on"?1:0
2013.02.08 09:38:25 5: Cmd: >get FileLog_SW.HEIZUNG.KIZ1 SW.HEIZUNG.KIZ1-2013.log INT 2013-02-08 2013-02-09 3::0:$fld[2]=~"on"?1:0<
2013.02.08 09:38:26 4: /fhem?cmd=showlog%20wl_1%20FileLog_SW.HEIZUNG.KIZ1%20myHMSw%20SW.HEIZUNG.KIZ1-2013.log&pos= / RL: 2348 / image/svg+xml / Content-Encoding: gzip
/

Wirst Du daraus schlau?

Matthias Gehre · 08 Februar 2013, 20:43:25

Anscheinend gibt es noch einen Typ von WallThermostatState Nachrichten (wir haben schon 3).
Habs eingebaut und committed, bitte testen.

teggi · 10 Februar 2013, 12:09:29

Funktionert perfekt. Danke.

Wenn ich jetzt die desriedTemperature neu setze, meldet MAX brav folgendes:

Code Auswählen


2013-02-10 12:06:54 MAX THERMO.KIZ1 desiredTemperature 17.0
2013-02-10 12:06:56 MAX THERMO.KIZ1 mode: manual
2013-02-10 12:06:56 MAX THERMO.KIZ1 battery: ok
2013-02-10 12:06:56 MAX THERMO.KIZ1 displayActualTemperature: 1
2013-02-10 12:06:56 MAX THERMO.KIZ1 desiredTemperature: 17.0
2013-02-10 12:06:56 MAX THERMO.KIZ1 17.0 °C

Öfters: DesiredTemperature: 0.0

teggi

teggi

teggi

teggi

teggi