angepasstes 00_SIGNALduino Modul, auch für FSK und für den Maple

Begonnen von Ralf9, 29 Mai 2020, 18:32:13

Vorheriges Thema - Nächstes Thema

Ralf9

Ist von der verwendeten Hardware abhängig
Wenn Du eine MapleCul Hardware hast, dann muss Du die Maple_cul_ firmware verwenden

Der Maple sduino hat eine andere PIN Belegung des cc1101 als der MapleCul
FHEM auf Cubietruck mit Igor-Image, SSD und  hmland + HM-CFG-USB-2,  HMUARTLGW Lan,   HM-LC-Bl1PBU-FM, HM-CC-RT-DN, HM-SEC-SC-2, HM-MOD-Re-8, HM-MOD-Em-8
HM-Wired:  HMW_IO_12_FM, HMW_Sen_SC_12_DR, Selbstbau IO-Module HBW_IO_SW
Maple-SIGNALduino, WH3080,  Hideki, Id 7

ole1986

Shame on me,

es lag natürlich daran das ich einen MapleCUL verwende und die falsche firmware aufgespielt habe. vielen Dank!

Ralf9

Es gibt nun im dev-branch eine neue Version der  00_SIGNALduino.pm  und  lib/signalduino_protocols.pm

versionmodul  v3.4.7-dev_ralf_14.10.
versionprotoL v3.4.7-dev_ralf_10.10.

Siehe hier in der ersten Nachricht.


Ich habe bei "set sduino rfmode" die Bezeichung ergänzt:

Die FSK-Bezeichung hat nun den folgenden Aufbau: "Name_Bx_Nx_Datarate"
- Bx: die Anzahl der Bytes die empfangen werden
- Nx: Nummerierung der cc1101 konfig
- Bei gleicher Nummerierung werden auch rfmode Einträge mit kleinerer Byteanzahl (Bx) verarbeitet.

Avantek_433__B8_N9_FSK
Bresser_5in1__B28_N7_8220
Bresser_6in1__B20_N7_8220
DP100_WH51_WH57_433__B16_N16_17241
DP100_WH51_WH57_868__B16_N6_17241
HoneywActivL__SlowRf_FSK
KOPP_FC__B20_N4_4785   
Lacrosse_mode1__B12_N1_17241
Lacrosse_mode2__B12_N2_9579
PCA301_mode3__B32_N3_6631
Rojaflex_433__B12_N8_GFSK
SlowRF_ccFactoryReset
W136__B24_N10_4798 
WH24_WH25__B20_N1_17241
WS1600_TX22_mode5__B16_N5_8842


In der Protokolliste (Display protocollist) werden bei comment die Anzahl Bytes (Bmin) und N auch angezeigt.

Bei einer Protokolldefininition können jetzt auch mehrere Nummern "N" eingetragen werden. Z.B. bei der ID 100 die cc1101 konfig Nr "N" 1 und 6

Gruß Ralf
FHEM auf Cubietruck mit Igor-Image, SSD und  hmland + HM-CFG-USB-2,  HMUARTLGW Lan,   HM-LC-Bl1PBU-FM, HM-CC-RT-DN, HM-SEC-SC-2, HM-MOD-Re-8, HM-MOD-Em-8
HM-Wired:  HMW_IO_12_FM, HMW_Sen_SC_12_DR, Selbstbau IO-Module HBW_IO_SW
Maple-SIGNALduino, WH3080,  Hideki, Id 7

andies

Hallo Ralf9,

Danke erstmal für Dein Modul, ich bin damit wirklich sehr zufrieden. Ich sehe auch, dass Du (für mich sinnvolle) Änderungen und Fixes einbaust, die es aus mir nicht erfindlichen Gründen nicht 8n das offizielle Modul übernommen werden. Sei's drum. Der Thread hier https://forum.fhem.de/index.php/topic,58397.msg1201918.html#msg1201918 ist anscheinend auch geschlossen, jedenfalls konnte ich gerade nichts darin fragen.

Wie kriege ich denn auch Dein Modul in mein System? Ich habe lange nicht mehr Updates gemacht, weil einfach alles lief und ich habe mir vermutlich gerade meine sduino-Struktur zerschossen (und auch in zwei anderen Threads gejammert). Derzeit habe ich
version V 3.3.2.1-rc8 SIGNALduino cc1101 - compiled at Jan 10 2019 20:13:56
versionProtocols. 1.21
versionmodul. v3.4.4

Und ich würde gern komplett auf Dein System wechseln. Das mache ich mit dem Befehl im ersten Post - muss ich dann das mit dem set sduino raw CDD auch noch tun? Vorher? Nachher?

Vielleicht sollten wir im Wiki Deine Entwicklung genauer beschreiben? Kann ich gern tun, wenn Du das für sinnvoll erachtest. (Mein Somfy geht halt nicht...)
FHEM 6.1 auf RaspPi3 (Raspbian:  6.1.21-v8+; Perl: v5.32.1)
SIGNALduino (433 MHz) und HM-UART (868 MHz), Sonoff, Blitzwolf, Somfy RTS, CAME-Gartentor, Volkszähler, Keyence-Sensor, Homematic-Sensoren und -thermostat, Ferraris-Zähler für Wasseruhr, Openlink-Nachbau Viessmann

Ralf9

Das "set sduino raw CDD" ist notwendig, daß meine firmware auch mit dem aktuellen 00_SIGNALduino Modul von Sidey funktioniert,
ich habe es hier beschrieben:
https://forum.fhem.de/index.php/topic,58397.msg1200199.html#msg1200199

Meine aktuelle firmware für slowrf (ASK/OOK) ist die V 3.3.2.1-rc9

Mein aktuelles 00_SIGNALduino Modul ist (siehe hier in diesem Thema die erste Nachricht)
versionmodul  v3.4.9-dev_ralf_15.01.
versionprotoL v3.4.9-dev_ralf_15.01.

Gruß Ralf
FHEM auf Cubietruck mit Igor-Image, SSD und  hmland + HM-CFG-USB-2,  HMUARTLGW Lan,   HM-LC-Bl1PBU-FM, HM-CC-RT-DN, HM-SEC-SC-2, HM-MOD-Re-8, HM-MOD-Em-8
HM-Wired:  HMW_IO_12_FM, HMW_Sen_SC_12_DR, Selbstbau IO-Module HBW_IO_SW
Maple-SIGNALduino, WH3080,  Hideki, Id 7

andies

Danke, bei mir läuft wieder Somfy. Ich habe jetzt die Firmware und das Modul gewechselt, ich vermute, ich muss das auch vom regulären Update-Prozess ausschließen, damit es nicht überschrieben wird - richtig?

Noch eine Frage. Anscheinend muss ich weitere Module mit Fixes von Dir einspielen, denn ich lese im Log
sduino: SD_WS_Parse UNDEFINED sensor SD_WS_106_T detected, code SD_WS_106_T
Das ist ein Temperatur- und Regensensor, den ich nicht mehr empfange. Ich habe auch Einträge mit TCM97001 gefunden, müssen die auch angepasst werden? Und dann auch vom Update ausgeschlossen werden?

Ich denke, wir müssen das mal im Wiki beschreiben, sonst melden sich noch mehr Leute hier und verzweifeln...
FHEM 6.1 auf RaspPi3 (Raspbian:  6.1.21-v8+; Perl: v5.32.1)
SIGNALduino (433 MHz) und HM-UART (868 MHz), Sonoff, Blitzwolf, Somfy RTS, CAME-Gartentor, Volkszähler, Keyence-Sensor, Homematic-Sensoren und -thermostat, Ferraris-Zähler für Wasseruhr, Openlink-Nachbau Viessmann

Ralf9

Zitatich muss das auch vom regulären Update-Prozess ausschließen, damit es nicht überschrieben wird - richtig?
Ja ausschließen oder nach dem fhem update noch ein update von meinem 00_SIGNALduino machen.

ZitatNoch eine Frage. Anscheinend muss ich weitere Module mit Fixes von Dir einspielen
Bei slowrf (ASK/OOK) sind eigentlich außer dem 00_SIGNALduino keine weitere Module von mir notwendig.

Zitatsduino: SD_WS_Parse UNDEFINED sensor SD_WS_106_T detected, code SD_WS_106_T
Dies ist ein Funk-Grillthermometer, wenn innerhalb 60 sec 5 Nachrichten empfangen werden, wird er per Autocreate angelegt.
FHEM auf Cubietruck mit Igor-Image, SSD und  hmland + HM-CFG-USB-2,  HMUARTLGW Lan,   HM-LC-Bl1PBU-FM, HM-CC-RT-DN, HM-SEC-SC-2, HM-MOD-Re-8, HM-MOD-Em-8
HM-Wired:  HMW_IO_12_FM, HMW_Sen_SC_12_DR, Selbstbau IO-Module HBW_IO_SW
Maple-SIGNALduino, WH3080,  Hideki, Id 7

andies

Zitat von: andies am 30 Januar 2022, 08:30:14
Ich denke, wir müssen das mal im Wiki beschreiben, sonst melden sich noch mehr Leute hier und verzweifeln...
Ich  habe mal im Wiki eine etwas ausführlichere Erläuterung beider Module geliefert, damit man das auseinander halten kann. Ich weiß nicht, ob ich die entsprechenden Links zu den Threads richtig erwischt habe, wenn nein - bitte melden.
FHEM 6.1 auf RaspPi3 (Raspbian:  6.1.21-v8+; Perl: v5.32.1)
SIGNALduino (433 MHz) und HM-UART (868 MHz), Sonoff, Blitzwolf, Somfy RTS, CAME-Gartentor, Volkszähler, Keyence-Sensor, Homematic-Sensoren und -thermostat, Ferraris-Zähler für Wasseruhr, Openlink-Nachbau Viessmann

andies

Ich muss nochmal nerven, Ralf9. Ich hatte in der "Mischversion" (also deine Firmware und Sideys Modul) ein Funkthermometer, das ich problemlos empfangen habe,
Internals:
   CODE       BresserTemeo_1
   DEF        BresserTemeo_1
   FVERSION   14_SD_WS.pm:0.254840/2022-01-17
   NAME       BresserTemeo_1
   NR         237
   STATE      Defined
   TYPE       SD_WS
   bitMSG     
   lastMSG   
   READINGS:
     2020-12-24 08:35:16   LastLowBattMailSent 1
     2022-01-29 22:30:38   battery         ok
     2022-01-29 22:30:38   batteryState    ok
     2022-01-29 22:30:38   channel         1
     2022-01-29 22:30:38   dew             2.78
     2022-01-29 22:30:38   humidity        76
     2022-01-29 22:30:38   state           T: 6.7 H: 76
     2022-01-29 22:30:38   temperature     6.7
     2022-01-29 22:30:38   temperature_at  5.0
     2022-01-29 22:30:38   temperature_mrt 6.7
     2022-01-29 22:30:38   temperature_utci 7.0
     2022-01-29 22:30:38   tmax            9.2
     2022-01-29 22:30:38   tmin            6.7
     2022-01-29 22:30:38   type            BresserTemeo
Attributes:
   alias      Kinderspielhaus
   event-aggregator tmin::none:min:86400,tmax::none:max:86400
   userReadings dew:temperature.* {urDewpoint($name)},tmin {ReadingsVal($name, "temperature", "")},tmax {ReadingsVal($name, "temperature", "")}, battery {ReadingsVal($name, "batteryState", "offline")}

Seit ich nun auf Dein Modul komplett umgestiegen bin (Firmware blieb unverändert, nur Modul 00_SIGNALduino.pm von Dir geholt), empfange ich dieses Funkthermometer nicht mehr, es wird auch nicht automatisch ein anderes angelegt. Statt dessen sehe ich das hier:
Internals:
   CODE       CUL_TCM97001_Unknown
   DEF        CUL_TCM97001_Unknown
   FUUID      61f63815-f33f-1115-645c-c1f75ecb3f94923d
   FVERSION   14_CUL_TCM97001.pm:0.208390/2019-12-28
   LASTInputDev sduino
   MSGCNT     6
   NAME       Unknown
   NR         479
   STATE      Code: 05680008
   TYPE       CUL_TCM97001
   lastH      0
   lastT      1643536210.30638
   sduino_DMSG s0568000800
   sduino_MSGCNT 6
   sduino_Protocol_ID 0.4
   sduino_RAWMSG MS;P0=-8748;P1=465;P3=-3996;P5=-2020;P6=-1524;D=10151515151513151315131315131515151515151515151515151515151315151516;CP=1;SP=0;R=246;
   sduino_RSSI -79
   sduino_TIME 2022-01-30 10:50:10
   READINGS:
     2022-01-30 10:50:10   state           Code: 05680008
Attributes:
   model      Unknown
   room       CUL_TCM97001

Hast Du eine Idee, wie ich an mein Funkthermometer am besten wieder herankomme? Vielen Dank für Deine Mühen, Somfy geht inzwischen übrigens wieder (ich hatte mich nicht getraut und meine Frau hatte vergessen, dass sie die Rolladen nicht auslösen soll  ;D )
FHEM 6.1 auf RaspPi3 (Raspbian:  6.1.21-v8+; Perl: v5.32.1)
SIGNALduino (433 MHz) und HM-UART (868 MHz), Sonoff, Blitzwolf, Somfy RTS, CAME-Gartentor, Volkszähler, Keyence-Sensor, Homematic-Sensoren und -thermostat, Ferraris-Zähler für Wasseruhr, Openlink-Nachbau Viessmann

Ralf9

Ich schau mirs heute Abend an.
Falls Du eine whitelist benutzt, muss da die ID 44 drin sein.
Hilfreich sind auch raw (MU) Nachrichten vom BresserTemeo. Meinstens gibts bei den Sensoren eine LED oder ähnliches wo man erkennen kann, wann er gerade sendet.
FHEM auf Cubietruck mit Igor-Image, SSD und  hmland + HM-CFG-USB-2,  HMUARTLGW Lan,   HM-LC-Bl1PBU-FM, HM-CC-RT-DN, HM-SEC-SC-2, HM-MOD-Re-8, HM-MOD-Em-8
HM-Wired:  HMW_IO_12_FM, HMW_Sen_SC_12_DR, Selbstbau IO-Module HBW_IO_SW
Maple-SIGNALduino, WH3080,  Hideki, Id 7

andies

Also, der sduino sieht jetzt so aus:
Internals:
   Clients    :IT:CUL_TCM97001:SD_RSL:OREGON:CUL_TX:SD_AS:Hideki:SD_WS07:SD_WS09: :SD_WS:RFXX10REC:Dooya:SOMFY:SD_BELL:SD_UT:SD_WS_Maverick:FLAMINGO:CUL_WS:Revolt:FS10: :CUL_FHTTK:Siro:FHT:FS20:CUL_EM:Fernotron:SD_Keeloq:SD_GT:LaCrosse:KOPP_FC:PCA301:SD_Rojaflex:SD_Tool:SIGNALduino_un:
   DEF        ESP-Signalduino.fritz.box:23
   DMSG       s056E5AA8C000
   DevState   initialized
   DeviceName ESP-Signalduino.fritz.box:23@57600
   EQMSGCNT   1
   FD         26
   FUUID      61f58b94-f33f-1115-0cba-86a7f44ead112b04
   FVERSION   00_SIGNALduino.pm:v3.4.6-s347/2021-06-24
   LASTDMSG   s056E5AA8C000
   LASTDMSGID 0.3
   MSGCNT     314
   NAME       sduino
   NR         478
   PARTIAL   
   RAWMSG     MS;P0=-8950;P1=482;P2=-2008;P3=-3983;D=10121212121213121312131312131313121213121313121312131213121312121213131212;CP=1;SP=0;R=248;
   RSSI       -78
   STATE      opened
   TIME       1643546037.8639
   TYPE       SIGNALduino
   rmsgRaw    Ms;���;��;�؇;���;D;C1;S0;RF8;
   sendworking 0
   version    V 3.3.2.1-rc8 SIGNALduino cc1101 - compiled at Jan 10 2019 20:13:56
   versionmodul v3.4.7-ralf_24.06.
   versionprotoL v3.4.7-ralf_24.06.
   DoubleMsgIDs:
   MatchList:
     10:SD_WS07 ^P7#[A-Fa-f0-9]{6}[AFaf][A-Fa-f0-9]{2}
     11:SD_WS09 ^P9#F[A-Fa-f0-9]+
     12:SD_WS   ^W\d+x{0,1}#.*
     13:RFXX10REC ^(20|29)[A-Fa-f0-9]+
     14:Dooya   ^P16#[A-Fa-f0-9]+
     15:SOMFY   ^Ys[0-9A-F]+
     16:SD_WS_Maverick ^P47#[A-Fa-f0-9]+
     17:SD_UT   ^P(?:14|20|24|26|29|30|34|46|56|68|69|76|78|81|83|86|90|91|91.1|92|93|95|97|99|104|105|201)#.*
     18:FLAMINGO ^P13\.?1?#[A-Fa-f0-9]+
     19:CUL_WS  ^K[A-Fa-f0-9]{5,}
     1:IT       ^i......
     20:Revolt  ^r[A-Fa-f0-9]{22}
     21:FS10    ^P61#[A-F0-9]+
     22:Siro    ^P72#[A-Fa-f0-9]+
     23:FHT     ^81..(04|09|0d)..(0909a001|83098301|c409c401)..
     24:FS20    ^81..(04|0c)..0101a001
     25:CUL_EM  ^E0.................
     26:Fernotron ^P82#.*
     27:SD_BELL ^P(?:15|32|41|42|57|79|96|98|112)#.*
     28:SD_Keeloq ^P(?:87|88)#.*
     29:SD_GT   ^P49#[A-Fa-f0-9]+
     2:CUL_TCM97001 ^s[A-Fa-f0-9]+
     30:LaCrosse ^(\S+\s+9 |OK\sWS\s)
     31:KOPP_FC ^kr..................
     32:PCA301  ^\S+\s+24
     33:SD_Rojaflex ^P109#[A-Fa-f0-9]+
     3:SD_RSL   ^P1#[A-Fa-f0-9]{8}
     4:OREGON   ^(3[8-9A-F]|[4-6][0-9A-F]|7[0-8]).*
     5:CUL_TX   ^TX..........
     6:SD_AS    ^P2#[A-Fa-f0-9]{7,8}
     7:Hideki   ^P12#75[A-F0-9]+
     90:SD_Tool ^pt([0-9]+(\.[0-9])?)(#.*)?
     9:CUL_FHTTK ^T[A-F0-9]{8}
     X:SIGNALduino_un ^[u]\d+#.*
   QUEUE:
   READINGS:
     2022-01-29 22:33:07   bWidth          Setting MDMCFG4 (10) to f7 = 58 KHz
     2022-01-29 22:51:13   cc1101_config   freq:433.920MHz bWidth:58KHz rAmpl:42dB sens:4dB (DataRate:5603.79Baud,Modulation:ASK/OOK)
     2022-01-29 20:57:52   cc1101_patable  C3E = 00 C8 00 00 00 00 00 00  => 7_dBm
     2022-01-29 23:01:18   ccpatable       433 MHz, C3E = 00 C8 00 00 00 00 00 00  => 7_dBm
     2022-01-29 23:01:05   config          MS=1;MU=1;MC=1;Mred=1;Mdebug=0_MScnt=4;MuSplitThresh=0;mcMinBitLen=8
     2022-01-30 13:16:43   ping            Unsupported command
     2022-01-30 12:47:03   state           opened
     2022-01-29 22:54:48   uptime          36 11:59:07
     2022-01-29 22:54:42   version         V 3.3.2.1-rc8 SIGNALduino cc1101 - compiled at Jan 10 2019 20:13:56
   getcmd:
   keepalive:
     ok         0
     retry      0
   mcIdList:
     10
     11
     12
     18
     43
     47
     52
     57
     58
     96
   mnIdList:
     100
     101
     102
     103
     107
     108
     109
     112
   msIdList:
     0
     0.1
     0.2
     0.3
     0.4
     0.5
     1
     3
     3.1
     4
     6
     7
     13
     13.2
     14
     15
     17
     20
     23
     25
     32.1
     33
     33.1
     33.2
     35
     41
     49
     51
     53
     54.1
     55
     65
     68
     74.1
     90
     91.1
     93
     106
   muIdList:
     8
     9
     13.1
     16
     17.1
     19
     21
     22
     24
     26
     27
     28
     29
     31
     32
     36
     37
     38
     39
     40
     44
     44.1
     45
     46
     48
     49.1
     49.2
     50
     54
     56
     59
     60
     61
     62
     64
     66
     67
     69
     70
     71
     72
     73
     74
     78
     79
     80
     84
     85
     86
     89
     91
     92
     94
     95
     97
     98
     99
     104
     105
     110
     111
     200
     201
   rfmodesets:
     rfmode     Avantek_433_FSK,DP100_WH51_17241,HoneywActivL_SlowRf_FSK,KOPP_FC_4785,Lacrosse_mode1_17241,Lacrosse_mode2_9579,PCA301_mode3_6631,Rojaflex_433_GFSK,SlowRF_ccFactoryReset,WS1600_TX22_mode5_8842,bresser_5in1_8220
Attributes:
   flashCommand avrdude -c arduino -b 57600 -P [PORT] -p atmega328p -v -v -U flash:w:[HEXFILE] 2>[LOGFILE]
   hardware   nanoCC1101
   updateChannelFW Ralf9
   whitelist_IDs 0,0.1,0.2,0.3,0.4,0.5,1,3,3.1,4,6,7,8,9,10,11,12,13,13.1,13.2,14,15,16,17,17.1,18,19,20,21,22,23,24,25,26,27,28,29,31,32,32.1,33,33.1,33.2,35,36,37,38,39,40,41,43,44,44.1,45,46,47,48,49,49.1,49.2,50,51,52,53,54,54.1,55,56,57,58,59,60,61,62,64,65,66,67,68,69,70,71,72,73,74,74.1,78,79,80,84,85,86,89,90,91,91.1,92,93,94,95,96,97,98,99,100,101,102,103,104,105,106,107,108,109,110,111,112,200,201

Die neue Firmware (rc9) kriege ich nur geflasht, wenn ich ihn abbaue (der ist in einem Schrank verbaut) und per USB flashe, das erinnere ich dunkel. Wenn es also ohne ginge, wäre ich froh (mit dieser Firmware konnte ich ja vorher empfangen). Ich hatte noch eine Blacklist drin, die habe ich gelöscht und ich werde jetzt auch mal die whitelist löschen, dann müsste er ja eigentlich alles empfangen. Sowohl Regenmesser als auch Thermometer senden, denn ich empfange die Signale ja auch TFA Dostman Geräten, aber eben nicht in FHEM. Merkwürdig ist, dass keine Geräte angelegt werden, obwohl autocreate kein disable-Attribut hat.

Ich habe mal mit verbose 4 ein wenig eingefangen, <edit> ich dachte erst, dass da das Thermometer dabei sein muss. Aber das scheint allein vom Windmesser zu kommen, der etwa alle 30 Sekunden sendet. Den Regenmesser und das Thermometer, die in der Zeit sich ja auch melden müssten, erscheinen da nicht?!</edit>
2022.01.30 13:40:40 4: sduino/msg READredu: MU;P0=-32001;P1=484;P2=-8943;P3=-4008;P4=-2022;CP=1;R=243;D=01213131313131312141414141413141314131314131414141414141414141414131313141414141413131314121212121414141414131413141313141313131414131413131413141314131314141414141413131212121214141414141314131413131413141414141414141414141413131314141414141313131412121;O;
2022.01.30 13:40:40 4: sduino/msg READredu: MS;P0=-8963;P1=469;P2=-2020;P3=-4010;D=10121212121213121312131312131313121213121313121312131213131212121212121313;CP=1;SP=0;R=242;
2022.01.30 13:40:40 4: sduino: Matched MS Protocol id 0.3 -> weather (v4), bitLen=36
2022.01.30 13:40:40 4: sduino: Decoded MS Protocol id 0.3 dmsg s056E5AB03000 length 40 RSSI = -81
2022.01.30 13:40:40 4: sduino Dispatch: s056E5AB03000, -81 dB, dispatch
2022.01.30 13:40:40 4: sduino: CUL_TCM97001 W132_5 5 (056E5AB03000) length: 12
2022.01.30 13:40:40 4: sduino: CUL_TCM97001_04: W132 windGuest: 2.6 aR: D 0 winddirDegree:180 winddir:4:S
2022.01.30 13:40:40 4: sduino: CUL_TCM97001_06: model: W132  CUL_TCM97001_5
2022.01.30 13:40:40 4: sduino: CUL_TCM97001 W132_5 ID: 5 Bat: ok CH: 1
2022.01.30 13:40:40 4: sduino: Matched MS Protocol id 0.4 -> weather (v5), bitLen=36
2022.01.30 13:40:40 4: sduino: Decoded MS Protocol id 0.4 dmsg s056E5AB03000 length 40 RSSI = -81
2022.01.30 13:40:40 4: sduino Dispatch: s056E5AB03000, Dropped (1) due to short time and equal msg
2022.01.30 13:40:40 4: sduino: Matched MS Protocol id 0.5 -> weather (v6), bitLen=36
2022.01.30 13:40:40 4: sduino: Matched MS Protocol id 106 -> GT-TMBBQ-01, bitLen=36
2022.01.30 13:40:40 4: sduino/msg READredu: MS;P0=-8963;P1=469;P2=-2020;P3=-4010;D=10121212121213121312131312131212121212121212121212131313121212121213131312;CP=1;SP=0;R=242;
2022.01.30 13:40:40 4: sduino: Matched MS Protocol id 0.3 -> weather (v4), bitLen=36
2022.01.30 13:40:40 4: sduino: Decoded MS Protocol id 0.3 dmsg s056800E0E000 length 40 RSSI = -81
2022.01.30 13:40:40 4: sduino Dispatch: s056800E0E000, -81 dB, dispatch
2022.01.30 13:40:40 4: sduino: CUL_TCM97001 W132_5 5 (056800E0E000) length: 12
2022.01.30 13:40:40 4: sduino: CUL_TCM97001_03:  W132  windSpeed: 1.4 aR: 7 0
2022.01.30 13:40:40 4: sduino: CUL_TCM97001_06: model: W132  CUL_TCM97001_5
2022.01.30 13:40:40 4: sduino: CUL_TCM97001 W132_5 ID: 5 Bat: ok CH: 1
2022.01.30 13:40:40 4: sduino: Matched MS Protocol id 0.4 -> weather (v5), bitLen=36
2022.01.30 13:40:40 4: sduino: Decoded MS Protocol id 0.4 dmsg s056800E0E000 length 40 RSSI = -81
2022.01.30 13:40:40 4: sduino Dispatch: s056800E0E000, Dropped (1) due to short time and equal msg
2022.01.30 13:40:40 4: sduino: Matched MS Protocol id 0.5 -> weather (v6), bitLen=36
2022.01.30 13:40:40 4: sduino: Matched MS Protocol id 106 -> GT-TMBBQ-01, bitLen=36
2022.01.30 13:40:40 4: sduino/msg READredu: MS;P0=-8963;P1=469;P2=-2020;P3=-4010;D=10121212121213121312131312131313121213121313121312131213131212121212121313;CP=1;SP=0;R=242;
2022.01.30 13:40:40 4: sduino: Matched MS Protocol id 0.3 -> weather (v4), bitLen=36
2022.01.30 13:40:40 4: sduino: Decoded MS Protocol id 0.3 dmsg s056E5AB03000 length 40 RSSI = -81
2022.01.30 13:40:40 4: sduino Dispatch: s056E5AB03000, -81 dB, dispatch
2022.01.30 13:40:40 4: sduino: Matched MS Protocol id 0.4 -> weather (v5), bitLen=36
2022.01.30 13:40:40 4: sduino: Decoded MS Protocol id 0.4 dmsg s056E5AB03000 length 40 RSSI = -81
2022.01.30 13:40:40 4: sduino Dispatch: s056E5AB03000, Dropped (1) due to short time and equal msg
2022.01.30 13:40:40 4: sduino: Matched MS Protocol id 0.5 -> weather (v6), bitLen=36
2022.01.30 13:40:40 4: sduino: Matched MS Protocol id 106 -> GT-TMBBQ-01, bitLen=36
2022.01.30 13:41:08 4: sduino/keepalive ok, retry = 0
2022.01.30 13:41:11 4: sduino/msg READredu: MS;P1=480;P2=-3997;P4=-8945;P5=-2003;D=14151515151512151215121215121515151515151515151515151212151515151515151512;CP=1;SP=4;R=247;O;
2022.01.30 13:41:11 4: sduino: Matched MS Protocol id 0.3 -> weather (v4), bitLen=36
2022.01.30 13:41:11 4: sduino: Decoded MS Protocol id 0.3 dmsg s056800601000 length 40 RSSI = -78.5
2022.01.30 13:41:11 4: sduino Dispatch: s056800601000, -78.5 dB, dispatch
2022.01.30 13:41:11 4: sduino: CUL_TCM97001 W132_5 5 (056800601000) length: 12
2022.01.30 13:41:11 4: sduino: CUL_TCM97001_03:  W132  windSpeed: 1.2 aR: 6 0
2022.01.30 13:41:11 4: sduino: CUL_TCM97001_06: model: W132  CUL_TCM97001_5
2022.01.30 13:41:11 4: sduino: CUL_TCM97001 W132_5 ID: 5 Bat: ok CH: 1
2022.01.30 13:41:11 4: sduino: Matched MS Protocol id 0.4 -> weather (v5), bitLen=36
2022.01.30 13:41:11 4: sduino: Decoded MS Protocol id 0.4 dmsg s056800601000 length 40 RSSI = -78.5
2022.01.30 13:41:11 4: sduino Dispatch: s056800601000, Dropped (1) due to short time and equal msg
2022.01.30 13:41:11 4: sduino: Matched MS Protocol id 0.5 -> weather (v6), bitLen=36
2022.01.30 13:41:11 4: sduino: Matched MS Protocol id 106 -> GT-TMBBQ-01, bitLen=36
2022.01.30 13:41:11 4: sduino/msg READredu: MS;P1=493;P2=-3996;P4=-8946;P5=-1999;D=14151515151512151215121215121212121212151515151215121212151515151515121515;CP=1;SP=4;R=247;O;
2022.01.30 13:41:11 4: sduino: Matched MS Protocol id 0.3 -> weather (v4), bitLen=36
2022.01.30 13:41:11 4: sduino: Decoded MS Protocol id 0.3 dmsg s056FC2E04000 length 40 RSSI = -78.5
2022.01.30 13:41:11 4: sduino Dispatch: s056FC2E04000, -78.5 dB, dispatch
2022.01.30 13:41:11 4: sduino: CUL_TCM97001 W132_5 5 (056FC2E04000) length: 12
2022.01.30 13:41:11 4: sduino: CUL_TCM97001_04: W132 windGuest: 1.4 aR: 7 0 winddirDegree:135 winddir:3:SE
2022.01.30 13:41:11 4: sduino: CUL_TCM97001_06: model: W132  CUL_TCM97001_5
2022.01.30 13:41:11 4: sduino: CUL_TCM97001 W132_5 ID: 5 Bat: ok CH: 1
2022.01.30 13:41:11 4: sduino: Matched MS Protocol id 0.4 -> weather (v5), bitLen=36
2022.01.30 13:41:11 4: sduino: Decoded MS Protocol id 0.4 dmsg s056FC2E04000 length 40 RSSI = -78.5
2022.01.30 13:41:11 4: sduino Dispatch: s056FC2E04000, Dropped (1) due to short time and equal msg
2022.01.30 13:41:11 4: sduino: Matched MS Protocol id 0.5 -> weather (v6), bitLen=36
2022.01.30 13:41:11 4: sduino: Matched MS Protocol id 106 -> GT-TMBBQ-01, bitLen=36
2022.01.30 13:41:11 4: sduino/msg READredu: MS;P1=483;P2=-3998;P4=-8951;P5=-1999;D=14151515151512151215121215121515151515151515151515151212151515151515151512;CP=1;SP=4;R=247;O;
2022.01.30 13:41:11 4: sduino: Matched MS Protocol id 0.3 -> weather (v4), bitLen=36
2022.01.30 13:41:11 4: sduino: Decoded MS Protocol id 0.3 dmsg s056800601000 length 40 RSSI = -78.5
2022.01.30 13:41:11 4: sduino Dispatch: s056800601000, -78.5 dB, dispatch
2022.01.30 13:41:11 4: sduino: Matched MS Protocol id 0.4 -> weather (v5), bitLen=36
2022.01.30 13:41:11 4: sduino: Decoded MS Protocol id 0.4 dmsg s056800601000 length 40 RSSI = -78.5
2022.01.30 13:41:11 4: sduino Dispatch: s056800601000, Dropped (1) due to short time and equal msg
2022.01.30 13:41:11 4: sduino: Matched MS Protocol id 0.5 -> weather (v6), bitLen=36
2022.01.30 13:41:11 4: sduino: Matched MS Protocol id 106 -> GT-TMBBQ-01, bitLen=36
2022.01.30 13:41:11 4: sduino/msg READredu: MS;P1=494;P2=-3984;P4=-8939;P5=-2000;D=14151515151512151215121215121212121212151515151215121212151515151515121515;CP=1;SP=4;R=247;
2022.01.30 13:41:11 4: sduino: Matched MS Protocol id 0 -> weather (v1), bitLen=36
2022.01.30 13:41:11 4: sduino: Decoded MS Protocol id 0 dmsg s056FC2E04000 length 40 RSSI = -78.5
2022.01.30 13:41:11 4: sduino Dispatch: s056FC2E04000, -78.5 dB, dispatch
2022.01.30 13:41:11 4: sduino: Matched MS Protocol id 0.3 -> weather (v4), bitLen=36
2022.01.30 13:41:11 4: sduino: Decoded MS Protocol id 0.3 dmsg s056FC2E04000 length 40 RSSI = -78.5
2022.01.30 13:41:11 4: sduino Dispatch: s056FC2E04000, Dropped (1) due to short time and equal msg
2022.01.30 13:41:11 4: sduino: Matched MS Protocol id 0.4 -> weather (v5), bitLen=36
2022.01.30 13:41:11 4: sduino: Decoded MS Protocol id 0.4 dmsg s056FC2E04000 length 40 RSSI = -78.5
2022.01.30 13:41:11 4: sduino Dispatch: s056FC2E04000, Dropped (2) due to short time and equal msg
2022.01.30 13:41:11 4: sduino: Matched MS Protocol id 0.5 -> weather (v6), bitLen=36
2022.01.30 13:41:11 4: sduino: Matched MS Protocol id 106 -> GT-TMBBQ-01, bitLen=36
2022.01.30 13:41:42 4: sduino/msg READredu: MS;P1=477;P2=-3996;P3=-8947;P4=-2012;D=13141414141412141214121214121414141414141414141414141212141414141414141412;CP=1;SP=3;R=232;O;
2022.01.30 13:41:42 4: sduino: Matched MS Protocol id 0.3 -> weather (v4), bitLen=36
2022.01.30 13:41:42 4: sduino: Decoded MS Protocol id 0.3 dmsg s056800601000 length 40 RSSI = -86
2022.01.30 13:41:42 4: sduino Dispatch: s056800601000, -86 dB, dispatch
2022.01.30 13:41:42 4: sduino: CUL_TCM97001 W132_5 5 (056800601000) length: 12
2022.01.30 13:41:42 4: sduino: CUL_TCM97001_03:  W132  windSpeed: 1.2 aR: 6 0
2022.01.30 13:41:42 4: sduino: CUL_TCM97001_06: model: W132  CUL_TCM97001_5
2022.01.30 13:41:42 4: sduino: CUL_TCM97001 W132_5 ID: 5 Bat: ok CH: 1
2022.01.30 13:41:42 4: sduino: Matched MS Protocol id 0.4 -> weather (v5), bitLen=36
2022.01.30 13:41:42 4: sduino: Decoded MS Protocol id 0.4 dmsg s056800601000 length 40 RSSI = -86
2022.01.30 13:41:42 4: sduino Dispatch: s056800601000, Dropped (1) due to short time and equal msg
2022.01.30 13:41:42 4: sduino: Matched MS Protocol id 0.5 -> weather (v6), bitLen=36
2022.01.30 13:41:42 4: sduino: Matched MS Protocol id 106 -> GT-TMBBQ-01, bitLen=36
2022.01.30 13:41:42 4: sduino/msg READredu: MS;P1=479;P2=-3996;P3=-8948;P4=-2014;D=13141414141412141214121214121212141412141212141214141414121414141412141414;CP=1;SP=3;R=232;O;
2022.01.30 13:41:42 4: sduino: Matched MS Protocol id 0.3 -> weather (v4), bitLen=36
2022.01.30 13:41:42 4: sduino: Decoded MS Protocol id 0.3 dmsg s056E5A108000 length 40 RSSI = -86
2022.01.30 13:41:42 4: sduino Dispatch: s056E5A108000, -86 dB, dispatch
2022.01.30 13:41:42 4: sduino: CUL_TCM97001 W132_5 5 (056E5A108000) length: 12
2022.01.30 13:41:42 4: sduino: CUL_TCM97001_04: W132 windGuest: 1.6 aR: 8 0 winddirDegree:180 winddir:4:S
2022.01.30 13:41:42 4: sduino: CUL_TCM97001_06: model: W132  CUL_TCM97001_5
2022.01.30 13:41:42 4: sduino: CUL_TCM97001 W132_5 ID: 5 Bat: ok CH: 1
2022.01.30 13:41:42 4: sduino: Matched MS Protocol id 0.4 -> weather (v5), bitLen=36
2022.01.30 13:41:42 4: sduino: Decoded MS Protocol id 0.4 dmsg s056E5A108000 length 40 RSSI = -86
2022.01.30 13:41:42 4: sduino Dispatch: s056E5A108000, Dropped (1) due to short time and equal msg
2022.01.30 13:41:42 4: sduino: Matched MS Protocol id 0.5 -> weather (v6), bitLen=36
2022.01.30 13:41:42 4: sduino: Matched MS Protocol id 106 -> GT-TMBBQ-01, bitLen=36
2022.01.30 13:41:42 4: sduino/msg READredu: MS;P1=486;P2=-3995;P3=-8952;P4=-2004;D=13141414141412141214121214121414141414141414141414141212141414141414141412;CP=1;SP=3;R=232;O;
2022.01.30 13:41:42 4: sduino: Matched MS Protocol id 0.3 -> weather (v4), bitLen=36
2022.01.30 13:41:42 4: sduino: Decoded MS Protocol id 0.3 dmsg s056800601000 length 40 RSSI = -86
2022.01.30 13:41:42 4: sduino Dispatch: s056800601000, -86 dB, dispatch
2022.01.30 13:41:42 4: sduino: Matched MS Protocol id 0.4 -> weather (v5), bitLen=36
2022.01.30 13:41:42 4: sduino: Decoded MS Protocol id 0.4 dmsg s056800601000 length 40 RSSI = -86
2022.01.30 13:41:42 4: sduino Dispatch: s056800601000, Dropped (1) due to short time and equal msg
2022.01.30 13:41:42 4: sduino: Matched MS Protocol id 0.5 -> weather (v6), bitLen=36
2022.01.30 13:41:42 4: sduino: Matched MS Protocol id 106 -> GT-TMBBQ-01, bitLen=36
2022.01.30 13:41:42 4: sduino/msg READredu: MS;P1=470;P2=-3997;P3=-8958;P4=-2022;D=13141414141412141214121214121212141412141212141214141414121414141412141414;CP=1;SP=3;R=232;
2022.01.30 13:41:42 4: sduino: Matched MS Protocol id 0.3 -> weather (v4), bitLen=36
2022.01.30 13:41:42 4: sduino: Decoded MS Protocol id 0.3 dmsg s056E5A108000 length 40 RSSI = -86
2022.01.30 13:41:42 4: sduino Dispatch: s056E5A108000, -86 dB, dispatch
2022.01.30 13:41:42 4: sduino: Matched MS Protocol id 0.4 -> weather (v5), bitLen=36
2022.01.30 13:41:42 4: sduino: Decoded MS Protocol id 0.4 dmsg s056E5A108000 length 40 RSSI = -86
2022.01.30 13:41:42 4: sduino Dispatch: s056E5A108000, Dropped (1) due to short time and equal msg
2022.01.30 13:41:42 4: sduino: Matched MS Protocol id 0.5 -> weather (v6), bitLen=36
2022.01.30 13:41:42 4: sduino: Matched MS Protocol id 106 -> GT-TMBBQ-01, bitLen=36
2022.01.30 13:42:08 4: sduino/keepalive ok, retry = 0
2022.01.30 13:42:13 4: sduino/msg READredu: MS;P1=474;P2=-4002;P3=-8946;P4=-2012;D=13141414141412141214141414141212141414121414141414121212141412141414121414;CP=1;SP=3;R=246;O;
2022.01.30 13:42:13 4: sduino: Matched MS Protocol id 0.3 -> weather (v4), bitLen=36
2022.01.30 13:42:13 4: sduino: Decoded MS Protocol id 0.3 dmsg s050620E44000 length 40 RSSI = -79
2022.01.30 13:42:13 4: sduino Dispatch: s050620E44000, -79 dB, dispatch
2022.01.30 13:42:13 4: sduino: CUL_TCM97001 W132_5 5 (050620E44000) length: 12
2022.01.30 13:42:13 4: sduino: CUL_TCM97001_02: W132 CH:1 Bat:1 Mode:0 T:7 H:27
2022.01.30 13:42:13 4: sduino: CUL_TCM97001_06: model: W132  CUL_TCM97001_5
2022.01.30 13:42:13 4: sduino: CUL_TCM97001 W132_5 ID: 5 T: 7.0 H: 27 Bat: ok CH: 1
2022.01.30 13:42:13 4: sduino: Matched MS Protocol id 0.4 -> weather (v5), bitLen=36
2022.01.30 13:42:13 4: sduino: Decoded MS Protocol id 0.4 dmsg s050620E44000 length 40 RSSI = -79
2022.01.30 13:42:13 4: sduino Dispatch: s050620E44000, Dropped (1) due to short time and equal msg
2022.01.30 13:42:13 4: sduino: Matched MS Protocol id 0.5 -> weather (v6), bitLen=36
2022.01.30 13:42:13 4: sduino: Matched MS Protocol id 106 -> GT-TMBBQ-01, bitLen=36
2022.01.30 13:42:13 4: sduino/msg READredu: MS;P1=464;P2=-4008;P3=-8959;P4=-2001;D=13141414141412141214141414141212141414121414141414121212141412141414121414;CP=1;SP=3;R=246;O;
2022.01.30 13:42:13 4: sduino: Matched MS Protocol id 0.3 -> weather (v4), bitLen=36
2022.01.30 13:42:13 4: sduino: Decoded MS Protocol id 0.3 dmsg s050620E44000 length 40 RSSI = -79
2022.01.30 13:42:13 4: sduino Dispatch: s050620E44000, Dropped (2) due to short time and equal msg
2022.01.30 13:42:13 4: sduino: Matched MS Protocol id 0.4 -> weather (v5), bitLen=36
2022.01.30 13:42:13 4: sduino: Decoded MS Protocol id 0.4 dmsg s050620E44000 length 40 RSSI = -79
2022.01.30 13:42:13 4: sduino Dispatch: s050620E44000, Dropped (3) due to short time and equal msg
2022.01.30 13:42:13 4: sduino: Matched MS Protocol id 0.5 -> weather (v6), bitLen=36
2022.01.30 13:42:13 4: sduino: Matched MS Protocol id 106 -> GT-TMBBQ-01, bitLen=36
2022.01.30 13:42:13 4: sduino/msg READredu: MS;P1=467;P2=-3999;P3=-8953;P4=-2029;D=13141414141412141214141414141212141414121414141414121212141412141414121414;CP=1;SP=3;R=246;O;
2022.01.30 13:42:13 4: sduino: Matched MS Protocol id 0.3 -> weather (v4), bitLen=36
2022.01.30 13:42:13 4: sduino: Decoded MS Protocol id 0.3 dmsg s050620E44000 length 40 RSSI = -79
2022.01.30 13:42:13 4: sduino Dispatch: s050620E44000, Dropped (4) due to short time and equal msg
2022.01.30 13:42:13 4: sduino: Matched MS Protocol id 0.4 -> weather (v5), bitLen=36
2022.01.30 13:42:13 4: sduino: Decoded MS Protocol id 0.4 dmsg s050620E44000 length 40 RSSI = -79
2022.01.30 13:42:13 4: sduino Dispatch: s050620E44000, Dropped (5) due to short time and equal msg
2022.01.30 13:42:13 4: sduino: Matched MS Protocol id 0.5 -> weather (v6), bitLen=36
2022.01.30 13:42:13 4: sduino: Matched MS Protocol id 106 -> GT-TMBBQ-01, bitLen=36
2022.01.30 13:42:13 4: sduino/msg READredu: MS;P1=476;P2=-3996;P3=-8956;P4=-2013;D=13141414141412141214141414141212141414121414141414121212141412141414121414;CP=1;SP=3;R=246;
2022.01.30 13:42:13 4: sduino: Matched MS Protocol id 0.3 -> weather (v4), bitLen=36
2022.01.30 13:42:13 4: sduino: Decoded MS Protocol id 0.3 dmsg s050620E44000 length 40 RSSI = -79
2022.01.30 13:42:13 4: sduino Dispatch: s050620E44000, Dropped (6) due to short time and equal msg
2022.01.30 13:42:13 4: sduino: Matched MS Protocol id 0.4 -> weather (v5), bitLen=36
2022.01.30 13:42:13 4: sduino: Decoded MS Protocol id 0.4 dmsg s050620E44000 length 40 RSSI = -79
2022.01.30 13:42:13 4: sduino Dispatch: s050620E44000, Dropped (7) due to short time and equal msg
2022.01.30 13:42:13 4: sduino: Matched MS Protocol id 0.5 -> weather (v6), bitLen=36
2022.01.30 13:42:13 4: sduino: Matched MS Protocol id 106 -> GT-TMBBQ-01, bitLen=36
2022.01.30 13:42:44 4: sduino/msg READredu: MS;P0=-9156;P1=474;P2=-4008;P4=-2017;D=10141414141412141214121214121414141414141414141414121412141414141412141412;CP=1;SP=0;R=246;O;
2022.01.30 13:42:44 4: sduino: Matched MS Protocol id 0.3 -> weather (v4), bitLen=36
2022.01.30 13:42:44 4: sduino: Decoded MS Protocol id 0.3 dmsg s056800A09000 length 40 RSSI = -79
2022.01.30 13:42:44 4: sduino Dispatch: s056800A09000, -79 dB, dispatch
2022.01.30 13:42:44 4: sduino: CUL_TCM97001 W132_5 5 (056800A09000) length: 12
2022.01.30 13:42:44 4: sduino: CUL_TCM97001_03:  W132  windSpeed: 1 aR: 5 0
2022.01.30 13:42:44 4: sduino: CUL_TCM97001_06: model: W132  CUL_TCM97001_5
2022.01.30 13:42:44 4: sduino: CUL_TCM97001 W132_5 ID: 5 Bat: ok CH: 1
2022.01.30 13:42:44 4: sduino: Matched MS Protocol id 0.4 -> weather (v5), bitLen=36
2022.01.30 13:42:44 4: sduino: Decoded MS Protocol id 0.4 dmsg s056800A09000 length 40 RSSI = -79
2022.01.30 13:42:44 4: sduino Dispatch: s056800A09000, Dropped (1) due to short time and equal msg
2022.01.30 13:42:44 4: sduino: Matched MS Protocol id 0.5 -> weather (v6), bitLen=36
2022.01.30 13:42:44 4: sduino: Matched MS Protocol id 106 -> GT-TMBBQ-01, bitLen=36
2022.01.30 13:42:44 4: sduino/msg READredu: MS;P0=-8948;P1=490;P2=-3994;P4=-2000;D=10141414141412141214121214121212121214121212141412121412121414141412141212;CP=1;SP=0;R=246;O;
2022.01.30 13:42:44 4: sduino: Matched MS Protocol id 0.3 -> weather (v4), bitLen=36
2022.01.30 13:42:44 4: sduino: Decoded MS Protocol id 0.3 dmsg s056FB9B0B000 length 40 RSSI = -79
2022.01.30 13:42:44 4: sduino Dispatch: s056FB9B0B000, -79 dB, dispatch
2022.01.30 13:42:44 4: sduino: CUL_TCM97001 W132_5 5 (056FB9B0B000) length: 12
2022.01.30 13:42:44 4: sduino: CUL_TCM97001_04: W132 windGuest: 2.6 aR: D 0 winddirDegree:315 winddir:7:NW
2022.01.30 13:42:44 4: sduino: CUL_TCM97001_06: model: W132  CUL_TCM97001_5
2022.01.30 13:42:44 4: sduino: CUL_TCM97001 W132_5 ID: 5 Bat: ok CH: 1
2022.01.30 13:42:44 4: sduino: Matched MS Protocol id 0.4 -> weather (v5), bitLen=36
2022.01.30 13:42:44 4: sduino: Decoded MS Protocol id 0.4 dmsg s056FB9B0B000 length 40 RSSI = -79
2022.01.30 13:42:44 4: sduino Dispatch: s056FB9B0B000, Dropped (1) due to short time and equal msg
2022.01.30 13:42:44 4: sduino: Matched MS Protocol id 0.5 -> weather (v6), bitLen=36
2022.01.30 13:42:44 4: sduino: Matched MS Protocol id 106 -> GT-TMBBQ-01, bitLen=36
2022.01.30 13:42:44 4: sduino/msg READredu: MS;P0=-8948;P1=479;P2=-4004;P4=-2017;D=10141414141412141214121214121414141414141414141414121412141414141412141412;CP=1;SP=0;R=246;O;
2022.01.30 13:42:44 4: sduino: Matched MS Protocol id 0.3 -> weather (v4), bitLen=36
2022.01.30 13:42:44 4: sduino: Decoded MS Protocol id 0.3 dmsg s056800A09000 length 40 RSSI = -79
2022.01.30 13:42:44 4: sduino Dispatch: s056800A09000, -79 dB, dispatch
2022.01.30 13:42:44 4: sduino: Matched MS Protocol id 0.4 -> weather (v5), bitLen=36
2022.01.30 13:42:44 4: sduino: Decoded MS Protocol id 0.4 dmsg s056800A09000 length 40 RSSI = -79
2022.01.30 13:42:44 4: sduino Dispatch: s056800A09000, Dropped (1) due to short time and equal msg
2022.01.30 13:42:44 4: sduino: Matched MS Protocol id 0.5 -> weather (v6), bitLen=36
2022.01.30 13:42:44 4: sduino: Matched MS Protocol id 106 -> GT-TMBBQ-01, bitLen=36
2022.01.30 13:42:44 4: sduino/msg READredu: MS;P0=-8946;P1=482;P2=-3997;P4=-2008;D=10141414141412141214121214121212121214121212141412121412121414141412141212;CP=1;SP=0;R=246;
2022.01.30 13:42:44 4: sduino: Matched MS Protocol id 0.3 -> weather (v4), bitLen=36
2022.01.30 13:42:44 4: sduino: Decoded MS Protocol id 0.3 dmsg s056FB9B0B000 length 40 RSSI = -79
2022.01.30 13:42:44 4: sduino Dispatch: s056FB9B0B000, -79 dB, dispatch
2022.01.30 13:42:44 4: sduino: Matched MS Protocol id 0.4 -> weather (v5), bitLen=36
2022.01.30 13:42:44 4: sduino: Decoded MS Protocol id 0.4 dmsg s056FB9B0B000 length 40 RSSI = -79
2022.01.30 13:42:44 4: sduino Dispatch: s056FB9B0B000, Dropped (1) due to short time and equal msg
2022.01.30 13:42:44 4: sduino: Matched MS Protocol id 0.5 -> weather (v6), bitLen=36
2022.01.30 13:42:44 4: sduino: Matched MS Protocol id 106 -> GT-TMBBQ-01, bitLen=36
FHEM 6.1 auf RaspPi3 (Raspbian:  6.1.21-v8+; Perl: v5.32.1)
SIGNALduino (433 MHz) und HM-UART (868 MHz), Sonoff, Blitzwolf, Somfy RTS, CAME-Gartentor, Volkszähler, Keyence-Sensor, Homematic-Sensoren und -thermostat, Ferraris-Zähler für Wasseruhr, Openlink-Nachbau Viessmann

Ralf9

ZitatIch habe mal mit verbose 4 ein wenig eingefangen, <edit> ich dachte erst, dass da das Thermometer dabei sein muss. Aber das scheint allein vom Windmesser zu kommen, der etwa alle 30 Sekunden sendet. Den Regenmesser und das Thermometer, die in der Zeit sich ja auch melden müssten, erscheinen da nicht?!</edit>
Nein da ist nichts dabei, beim BresserTemeo sind's MU-Nachrichten.

Bitte poste mal ein "get config"

ZitatDie neue Firmware (rc9) kriege ich nur geflasht, wenn ich ihn abbaue (der ist in einem Schrank verbaut) und per USB flashe, das erinnere ich dunkel. Wenn es also ohne ginge, wäre ich froh
Bei der V 3.3.2.1-rc9 ist nicht viel dazugekommen.
Zitat16.06.19   V 3.3.2.1-rc9
Es werden nun am Anfang von MS-Nachrichten auch mehrere sync in Folge erkannt und übersprungen.
Z.B. ein Temperatursensor der ID 33 hat am Anfang 14 sync.
Bei der Ausgabe werden nun mit "b" die Position des ersten Sync und mit "s" die Anzahl der sync ausgegeben.
Z.B.: "...01010;CP=1;SP=3;R=6;O;b63;s4;m0;" beim GT-WT-02 Temperatursensor
FHEM auf Cubietruck mit Igor-Image, SSD und  hmland + HM-CFG-USB-2,  HMUARTLGW Lan,   HM-LC-Bl1PBU-FM, HM-CC-RT-DN, HM-SEC-SC-2, HM-MOD-Re-8, HM-MOD-Em-8
HM-Wired:  HMW_IO_12_FM, HMW_Sen_SC_12_DR, Selbstbau IO-Module HBW_IO_SW
Maple-SIGNALduino, WH3080,  Hideki, Id 7

andies

Zitat von: Ralf9 am 30 Januar 2022, 20:56:26
Bitte poste mal ein "get config"
config: MS=1;MU=1;MC=1;Mred=1;Mdebug=0_MScnt=4;MuSplitThresh=0;mcMinBitLen=8
FHEM 6.1 auf RaspPi3 (Raspbian:  6.1.21-v8+; Perl: v5.32.1)
SIGNALduino (433 MHz) und HM-UART (868 MHz), Sonoff, Blitzwolf, Somfy RTS, CAME-Gartentor, Volkszähler, Keyence-Sensor, Homematic-Sensoren und -thermostat, Ferraris-Zähler für Wasseruhr, Openlink-Nachbau Viessmann

Ralf9

ZitatmcMinBitLen=8
Der Defaultwert ist hier 17
get sduino raw CSmcmbl=17
Dies ist die Minimallänge von MC-Nachrichten


FHEM auf Cubietruck mit Igor-Image, SSD und  hmland + HM-CFG-USB-2,  HMUARTLGW Lan,   HM-LC-Bl1PBU-FM, HM-CC-RT-DN, HM-SEC-SC-2, HM-MOD-Re-8, HM-MOD-Em-8
HM-Wired:  HMW_IO_12_FM, HMW_Sen_SC_12_DR, Selbstbau IO-Module HBW_IO_SW
Maple-SIGNALduino, WH3080,  Hideki, Id 7

andies

Und da ist schon mal was, danke
2022.01.30 20:55:42 1: sduino: SD_WS_Parse UNDEFINED sensor SD_WS_106_T detected, code SD_WS_106_T
Aber komischerweise wird da nichts angelegt. Und die (früher einmal) angelegten werden nicht verändert. Hast du einen Tipp?
FHEM 6.1 auf RaspPi3 (Raspbian:  6.1.21-v8+; Perl: v5.32.1)
SIGNALduino (433 MHz) und HM-UART (868 MHz), Sonoff, Blitzwolf, Somfy RTS, CAME-Gartentor, Volkszähler, Keyence-Sensor, Homematic-Sensoren und -thermostat, Ferraris-Zähler für Wasseruhr, Openlink-Nachbau Viessmann