[erledigt] Jeden Abend Schwierigkeiten beim FHEM Webzugriff

Jogi · 03 Juni 2020, 11:55:45

Hallo zusammen,
ich habe ein seltsames Phänomen.
Jeden Abend ungefähr gegen 22:00 Uhr (+/- 15 Minuten) habe ich irgendwann das Problem, dass ich auf die FHEM-Weboberfläche nicht mehr zugreifen kann.
Die Seite lädt dann ewig (ca. 5 Minuten). Das ganze dauert dann so ca. 20-30 Minuten und danach geht alles wieder normal.

Ich habe mir die FHEM-Log angesehen und stelle fest, dass es ab ca. 21:00 Uhr diverse timeouts gibt.
Das betrifft zuerst nur ein Shelly-Modul, später auch andere Wlan-Geräte.
Zusätzlich kommt irgendwann die Meldung:

Code Auswählen

Timeout for SYSMON_blockingCall reached, terminated process 7291
und

Code Auswählen

Timeout for PRESENCE_DoLocalPingScan reached, terminated process 6968

Hier mal ein kompletter Auszug aus der fhem.log:
[code]2020.06.02 21:19:12 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:19:18 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:19:28 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:19:29 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:19:33 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:19:38 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:19:47 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:19:50 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:19:52 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:19:58 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:20:06 3: sduino IT_set: RGB_Alina off
2020.06.02 21:20:09 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:20:10 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:20:13 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:20:17 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:20:25 3: LED_Kueche: EspLedController_RGB2HSV: 1023 - 1023 - 1023
2020.06.02 21:20:29 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:20:33 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:20:37 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:20:48 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:21:02 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:21:09 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:21:28 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:21:38 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcdcmd on
2020.06.02 21:21:38 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcdcmd clear
2020.06.02 21:21:38 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 1 1 Aussen: 26.7
2020.06.02 21:21:38 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 1 14 'C
2020.06.02 21:21:38 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 1 Pool:
2020.06.02 21:21:39 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 9 23.12
2020.06.02 21:21:39 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 14 'C
2020.06.02 21:21:47 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:22:06 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:22:27 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:22:28 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:22:32 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:22:35 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:22:41 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:22:47 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:22:48 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:22:52 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:22:56 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:23:02 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:23:05 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:23:09 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:23:10 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:23:28 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:23:30 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:23:32 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:23:49 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:23:56 3: LED_Kueche: EspLedController_RGB2HSV: 521.529411764706 - 104.305882352941 - 369.082352941176
2020.06.02 21:24:02 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:24:09 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:24:28 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:24:39 3: CUL868: Unknown code A1F10008E772BEB737FEC000004C20B7B1BCB9DABD0F70BA5719917874D818EB8::-84.5:CUL868, help me!
2020.06.02 21:24:39 3: CUL868: Unknown code A1F10008E772BEB737FEC000004C20B7B1BCB9DABD0F70BA5719917874D818EB8::-84.5:CUL868, help me!
2020.06.02 21:24:39 3: CUL868: Unknown code A1F10008E772BEB737FEC000004C20B7B1BCB9DABD0F70BA5719917874D818EB8::-84.5:CUL868, help me!
2020.06.02 21:24:40 3: CUL868: Unknown code A2210088E772BEBE00002000004C3513FD8E195FEC4F05E680D131C44657BDAA8B0C133::-84.5:CUL868, help me!
2020.06.02 21:24:47 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:24:49 3: CUL_HM set Warmwasserpumpe on
2020.06.02 21:25:06 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:25:19 2: _VorlageDOIF_Temp: set XXX on: Please define XXX first
2020.06.02 21:25:25 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:25:32 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:25:44 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:26:03 3: CUL_HM set Warmwasserpumpe on
2020.06.02 21:26:03 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:26:23 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:26:39 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcdcmd on
2020.06.02 21:26:39 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcdcmd clear
2020.06.02 21:26:39 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 1 1 Aussen: 26.6
2020.06.02 21:26:39 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 1 14 'C
2020.06.02 21:26:39 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 1 Pool:
2020.06.02 21:26:39 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 9 23.12
2020.06.02 21:26:39 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 14 'C
2020.06.02 21:26:42 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:27:02 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:27:03 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:27:22 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:27:41 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:28:00 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:28:19 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:28:22 1: PERL WARNING: Use of uninitialized value $value in string eq at fhem.pl line 4785, <GEN122> line 853.
2020.06.02 21:28:32 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 21:28:34 3: ESPEasy LCD_Display_2004: set LCD_Display_2004 lcdcmd off
2020.06.02 21:28:39 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:28:58 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:29:17 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:29:36 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:29:55 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:30:14 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:30:33 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:30:52 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:31:11 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:31:19 2: _VorlageDOIF_Temp: set XXX off: Please define XXX first
2020.06.02 21:31:31 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:31:39 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcdcmd on
2020.06.02 21:31:39 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcdcmd clear
2020.06.02 21:31:39 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 1 1 Aussen: 26.45
2020.06.02 21:31:40 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 1 14 'C
2020.06.02 21:31:40 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 1 Pool:
2020.06.02 21:31:40 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 9 23.06
2020.06.02 21:31:40 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 14 'C
2020.06.02 21:31:50 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:32:09 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:32:28 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:32:47 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:33:06 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:33:20 1: [Shelly_status] has error connect to http://192.168.178.142:80 timed out
2020.06.02 21:33:26 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:33:36 3: CUL_HM set Lampe_Flur 8
2020.06.02 21:33:45 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:34:04 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:34:23 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:34:29 3: LED_Kueche: EspLedController_RGB2HSV: 1023 - 1023 - 1023
2020.06.02 21:34:42 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:35:01 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:35:20 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:35:40 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:35:59 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:36:18 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:36:20 3: CUL_HM set Warmwasserpumpe off
2020.06.02 21:36:20 3: FS20 set FS20_Taster2 off
2020.06.02 21:36:37 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:36:40 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcdcmd on
2020.06.02 21:36:40 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcdcmd clear
2020.06.02 21:36:40 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 1 1 Aussen: 26.2
2020.06.02 21:36:40 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 1 14 'C
2020.06.02 21:36:40 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 1 Pool:
2020.06.02 21:36:40 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 9 23.06
2020.06.02 21:36:40 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 14 'C
2020.06.02 21:36:56 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:37:15 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:37:34 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:37:53 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:37:59 3: LED_Kueche: EspLedController_RGB2HSV: 521.529411764706 - 104.305882352941 - 369.082352941176
2020.06.02 21:38:13 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:38:32 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:38:51 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:39:10 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:39:29 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:39:33 3: CUL_HM set Lampe_Flur 8
2020.06.02 21:39:48 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:40:07 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:40:26 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:40:45 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:41:05 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:41:24 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:41:40 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcdcmd on
2020.06.02 21:41:40 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcdcmd clear
2020.06.02 21:41:41 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 1 1 Aussen: 26.2
2020.06.02 21:41:41 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 1 14 'C
2020.06.02 21:41:41 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 1 Pool:
2020.06.02 21:41:41 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 9 23.06
2020.06.02 21:41:41 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 14 'C
2020.06.02 21:41:43 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:42:02 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:42:21 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:42:40 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:42:59 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:43:19 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:43:38 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:43:57 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:44:16 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:44:35 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:44:55 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:45:14 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:45:32 3: CUL_HM set Lampe_Flur 8
2020.06.02 21:45:35 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:45:54 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:46:13 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:46:32 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:46:41 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcdcmd on
2020.06.02 21:46:41 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcdcmd clear
2020.06.02 21:46:41 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 1 1 Aussen: 26.05
2020.06.02 21:46:41 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 1 14 'C
2020.06.02 21:46:41 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 1 Pool:
2020.06.02 21:46:41 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 9 23.00
2020.06.02 21:46:41 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 14 'C
2020.06.02 21:46:51 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:47:11 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:47:30 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:47:49 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:48:08 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:48:27 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:48:46 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:49:05 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:49:24 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:49:43 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:50:03 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:50:22 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:50:41 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:51:00 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:51:19 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:51:32 3: CUL_HM set Lampe_Flur 8
2020.06.02 21:51:39 1: sduino: SD_UT_Parse UNDEFINED sensor unknown detected, protocol 34, data 02D02, code 02D
2020.06.02 21:51:39 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:51:42 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcdcmd on
2020.06.02 21:51:42 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcdcmd clear
2020.06.02 21:51:42 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 1 1 Aussen: 25.95
2020.06.02 21:51:42 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 1 14 'C
2020.06.02 21:51:42 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 1 Pool:
2020.06.02 21:51:42 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 9 23.00
2020.06.02 21:51:42 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 14 'C
2020.06.02 21:51:58 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:52:17 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:52:20 3: CUL_HM set HM_36055C_Sw_01 on
2020.06.02 21:52:22 3: FS20 set Gartenbeleuchtung on
2020.06.02 21:52:24 3: CUL_HM set HM_36055C_Sw_02 on
2020.06.02 21:52:37 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:52:40 1: No Logdevice >FileLog_Helligkeit<
2020.06.02 21:52:43 1: No Logdevice >FileLog_Helligkeit<
2020.06.02 21:52:56 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:53:15 1: 192.168.178.138:9090 reappeared (LED_Band_Terrasse)
2020.06.02 21:53:15 3: LED_Band_Terrasse: EspLedController_RGB2HSV: 68.2 - 68.2 - 449.317647058824
2020.06.02 21:53:16 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:53:16 3: LED_Band_Terrasse: got info response
2020.06.02 21:53:16 3: LED_Band_Terrasse: info response data {"deviceid":"10963372","current_rom":"0","git_version":"4.2.0-rc1","git_date":"2019-06-26","webapp_version":"0.3.3-shojo7","sming":"3.8.0","event_num_clients":1,"uptime":0,"heap_free":27296,"rgbww":{"version":"0.9.0","queuesize":100},"connection":{"connected":true,"ssid":"JS","dhcp":true,"ip":"192.168.178.138","netmask":"255.255.255.0","gateway":"192.168.178.1","mac":"840d8ea749ac"}}
2020.06.02 21:53:35 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:53:55 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:54:14 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:54:33 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:54:53 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:55:12 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:55:31 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:55:50 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:56:09 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:56:28 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:56:42 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcdcmd on
2020.06.02 21:56:42 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcdcmd clear
2020.06.02 21:56:42 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 1 1 Aussen: 25.8
2020.06.02 21:56:42 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 1 14 'C
2020.06.02 21:56:42 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 1 Pool:
2020.06.02 21:56:43 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 9 23.00
2020.06.02 21:56:43 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 14 'C
2020.06.02 21:56:47 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:57:07 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:57:26 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:57:32 3: CUL_HM set Lampe_Flur 8
2020.06.02 21:57:45 3: LaCrosse: Unknown device 3F, please define it
2020.06.02 21:57:45 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:58:04 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:58:23 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:58:42 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:59:01 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:59:20 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:59:39 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 21:59:59 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:00:00 3: nSonnenuntergang: no set value specified
2020.06.02 22:00:00 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcdcmd off
2020.06.02 22:00:01 3: LED_Band_Terrasse: EspLedController_RGB2HSV: 68.2 - 68.2 - 449.317647058824
2020.06.02 22:00:11 3: ESPEasy LCD_Display_2004: set LCD_Display_2004 lcdcmd on
2020.06.02 22:00:11 3: ESPEasy LCD_Display_2004: set LCD_Display_2004 lcdcmd clear
2020.06.02 22:00:11 3: ESPEasy LCD_Display_2004: set LCD_Display_2004 lcd 1 1 Aussentemp: 25.75'C
2020.06.02 22:00:11 3: ESPEasy LCD_Display_2004: set LCD_Display_2004 lcd 2 1 Aussenfeuchte: 35%rF
2020.06.02 22:00:11 3: ESPEasy LCD_Display_2004: set LCD_Display_2004 lcd 3 1 Wohnzimmer: 25'C
2020.06.02 22:00:11 3: ESPEasy LCD_Display_2004: set LCD_Display_2004 lcd 4 1 Alina: 26'C
2020.06.02 22:00:13 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 22:00:17 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 22:00:20 2: ESPEasy espBridge: http://192.168.178.67:80/control?cmd=lcdcmd,on: empty answer received [set LCD_Display_2004 lcdcmd on]
2020.06.02 22:00:20 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:00:22 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 22:00:24 3: LED_Kueche: EspLedController_RGB2HSV: 1023 - 1023 - 1023
2020.06.02 22:00:39 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:00:58 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:01:17 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:01:32 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 22:01:38 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:01:58 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:02:07 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 22:02:11 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 22:02:18 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:02:37 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:02:56 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:03:02 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 22:03:15 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:03:35 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:03:52 3: LED_Kueche: EspLedController_RGB2HSV: 521.529411764706 - 104.305882352941 - 369.082352941176
2020.06.02 22:03:54 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:04:13 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:04:15 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 22:04:18 3: CUL_HM set Warmwasserpumpe off
2020.06.02 22:04:32 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 22:04:35 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:04:54 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:05:13 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:05:32 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:05:51 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:06:10 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:06:29 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:06:48 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:07:08 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:07:12 3: ESPEasy LCD_Display_2004: set LCD_Display_2004 lcdcmd off
2020.06.02 22:07:27 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:07:46 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:08:05 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:08:24 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:08:43 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:09:02 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:09:07 3: sduino IT: Schminkspiegel on->on
2020.06.02 22:09:15 1: sduino: SD_BELL_Parse UNDEFINED BELL detected, Protocol 42 code F4BF10F
2020.06.02 22:09:21 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:09:40 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:10:00 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:10:06 3: FS20 set Wohnzimmer on
2020.06.02 22:10:19 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:10:24 1: PERL WARNING: Use of uninitialized value $value in string eq at fhem.pl line 4785, <GEN122> line 859.
2020.06.02 22:10:38 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:10:51 1: sduino: SD_BELL_Parse UNDEFINED BELL detected, Protocol 42 code F4BF10F
2020.06.02 22:10:51 1: sduino: SD_BELL_Parse UNDEFINED BELL detected, Protocol 42 code F4BF10F
2020.06.02 22:10:57 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:11:16 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:11:35 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:11:53 3: LED_Kueche: EspLedController_RGB2HSV: 1023 - 1023 - 1023
2020.06.02 22:11:55 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:12:14 3: CUL_HM set Lampe_Flur 8
2020.06.02 22:12:16 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:12:31 3: LED_Wohnz_Decke: EspLedController_RGB2HSV: 0 - 0 - 778.282352941176
2020.06.02 22:12:38 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:12:38 1: [Shelly_status] has error write to http://192.168.178.139:80 timed out
2020.06.02 22:12:57 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:13:16 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:13:35 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:13:54 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:13:56 3: LED_Band_Terrasse: EspLedController_RGB2HSV: 0 - 0 - 461.352941176471
2020.06.02 22:14:06 3: ESPEasy LCD_Display_2004: set LCD_Display_2004 lcdcmd on
2020.06.02 22:14:06 3: ESPEasy LCD_Display_2004: set LCD_Display_2004 lcdcmd clear
2020.06.02 22:14:06 3: ESPEasy LCD_Display_2004: set LCD_Display_2004 lcd 1 1 Aussentemp: 25.45'C
2020.06.02 22:14:06 3: ESPEasy LCD_Display_2004: set LCD_Display_2004 lcd 2 1 Aussenfeuchte: 37%rF
2020.06.02 22:14:06 3: ESPEasy LCD_Display_2004: set LCD_Display_2004 lcd 3 1 Wohnzimmer: 25'C
2020.06.02 22:14:06 3: ESPEasy LCD_Display_2004: set LCD_Display_2004 lcd 4 1 Alina: 26'C
2020.06.02 22:14:07 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 22:14:12 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 22:14:15 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:14:21 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 22:14:34 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:14:53 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:15:12 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:15:17 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 22:15:24 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 22:15:31 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:15:50 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:15:56 3: LED_Wohnz_Decke: EspLedController_RGB2HSV: 962.823529411765 - 316.929411764706 - 898.635294117647
2020.06.02 22:16:05 1: [Shelly_status] has error write to http://192.168.178.25:80 timed out
2020.06.02 22:16:05 1: [Shelly_status] has error write to http://192.168.178.26:80 timed out
2020.06.02 22:16:05 1: [Shelly_status] has error write to http://192.168.178.141:80 timed out
2020.06.02 22:16:05 1: [Shelly_status] has error write to http://192.168.178.142:80 timed out
2020.06.02 22:16:12 1: [Shelly_status] has error write to http://192.168.178.143:80 timed out
2020.06.02 22:16:16 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:16:18 3: LED_Kueche: EspLedController_RGB2HSV: 1023 - 0 - 0
2020.06.02 22:16:19 3: LED_Wohnz_Decke: EspLedController_RGB2HSV: 1023 - 0 - 0
2020.06.02 22:16:20 3: sduino IT_set: EG on
2020.06.02 22:16:23 3: CUL_HM set Buegeleisen off
2020.06.02 22:16:39 3: FS20 set Tablet_Wand off
2020.06.02 22:16:39 3: sduino IT_set: Tablet1 off
2020.06.02 22:16:39 3: FS20 set Gartenbeleuchtung off
2020.06.02 22:16:40 3: CUL_HM set HM_36055C_Sw_01 off
2020.06.02 22:16:41 3: CUL_HM set HM_36055C_Sw_02 off
2020.06.02 22:16:42 3: CUL_HM set HM_36055C_Sw_03 off
2020.06.02 22:16:42 3: CUL_HM set HM_36055C_Sw_04 off
2020.06.02 22:16:43 3: CUL_HM set HM_36055C_Sw_05 off
2020.06.02 22:16:57 3: sduino IT_set: Tablet1 off
2020.06.02 22:16:58 3: FS20 set Entfeuchter off
2020.06.02 22:16:58 3: sduino IT_set: Baum_Garten off
2020.06.02 22:16:58 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:16:58 1: [Shelly_status] has error write to http://192.168.178.139:80 timed out
2020.06.02 22:16:59 3: LED_Band_Terrasse: EspLedController_CheckConnection: Connection lost! Last data received 91 s ago
2020.06.02 22:16:59 1: 192.168.178.138:9090 disconnected, waiting to reappear (LED_Band_Terrasse)
2020.06.02 22:16:59 1: [Shelly_status] has error write to http://192.168.178.25:80 timed out
2020.06.02 22:17:00 1: [Shelly_status] has error write to http://192.168.178.141:80 timed out
2020.06.02 22:17:00 1: [Shelly_meter has error write to http://192.168.178.26:80 timed out
2020.06.02 22:17:01 3: sduino IT_set: ElroOutdoor3 off
2020.06.02 22:17:01 3: YAMAHA_AVR (Yamaha) - could not execute command on device Yamaha. Please turn on your device in case of deactivated network standby or check for correct hostaddress.
2020.06.02 22:17:01 3: nYamahaon return value: Unknown argument absent, choose one of dim06% dim100% dim12% dim18% dim25% dim31% dim37% dim43% dim50% dim56% dim62% dim68% dim75% dim81% dim87% dim93% dimdown dimup dimupdown off off-for-timer on on-100-for-timer-prev on-for-timer on-old-for-timer on-old-for-timer-prev ramp-off-time ramp-on-time reset sendstate timer toggle dim:slider,0,6.25,100 blink on-till intervals off-till off-till-overnight on-till-overnight
2020.06.02 22:17:02 2: LED_Wohnz_Decke: EspLedController_ParseBoolResult error: http://192.168.178.109/color: empty answer received
2020.06.02 22:17:11 3: YAMAHA_AVR (Yamaha) - device Yamaha reappeared
2020.06.02 22:17:12 3: FS20 set Subwoofer off
2020.06.02 22:17:16 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 22:17:20 2: LED_Band_Terrasse: EspLedController_ParseBoolResult error: 192.168.178.138: Keine Route zum Zielrechner (113)
2020.06.02 22:17:20 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:17:23 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 22:17:25 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 22:17:37 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 22:17:40 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:17:59 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:18:09 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 22:18:18 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:18:37 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:18:56 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:19:15 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:19:34 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:19:39 1: sduino: SD_BELL_Parse UNDEFINED BELL detected, Protocol 42 code 8868F60
2020.06.02 22:19:54 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:20:13 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:20:27 1: sduino: SD_UT_Parse UNDEFINED sensor unknown detected, protocol 34, data 13FD8, code 13F
2020.06.02 22:20:32 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:20:51 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:21:10 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:21:19 3: LED_Kueche: EspLedController_RGB2HSV: 0 - 0 - 0
2020.06.02 22:21:40 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:21:40 1: [Shelly_status] has error connect to http://192.168.178.139:80 timed out
2020.06.02 22:22:06 1: [Shelly_status] has error write to http://192.168.178.141:80 timed out
2020.06.02 22:22:33 1: sduino: SD_BELL_Parse UNDEFINED BELL detected, Protocol 42 code E2183C6
2020.06.02 22:22:34 1: [Shelly_status] has error connect to http://192.168.178.27:80 timed out
2020.06.02 22:22:34 1: [Shelly_status] has error write to http://192.168.178.143:80 timed out
2020.06.02 22:22:34 1: [Shelly_status] has error write to http://192.168.178.26:80 timed out
2020.06.02 22:22:34 1: [Shelly_status] has error write to http://192.168.178.139:80 timed out
2020.06.02 22:22:34 1: [Shelly_status] has error write to http://192.168.178.25:80 timed out
2020.06.02 22:22:37 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 22:23:07 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 22:23:07 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 6968
2020.06.02 22:23:07 2: PRESENCE (Handy_Alina) - device could not be checked (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:23:07 1: [Shelly_status] has error read from http://192.168.178.142:80 timed out
2020.06.02 22:23:07 3: LED_Kueche: EspLedController_CheckConnection: Connection lost! Last data received 87 s ago
2020.06.02 22:23:07 1: 192.168.178.137:9090 disconnected, waiting to reappear (LED_Kueche)
2020.06.02 22:23:07 3: YAMAHA_AVR (Yamaha) - could not execute command on device Yamaha. Please turn on your device in case of deactivated network standby or check for correct hostaddress.
2020.06.02 22:23:08 3: nYamahaon return value: Unknown argument absent, choose one of dim06% dim100% dim12% dim18% dim25% dim31% dim37% dim43% dim50% dim56% dim62% dim68% dim75% dim81% dim87% dim93% dimdown dimup dimupdown off off-for-timer on on-100-for-timer-prev on-for-timer on-old-for-timer on-old-for-timer-prev ramp-off-time ramp-on-time reset sendstate timer toggle dim:slider,0,6.25,100 on-till-overnight blink off-till-overnight off-till on-till intervals
2020.06.02 22:23:08 1: Timeout for SYSMON_blockingCall reached, terminated process 7291
2020.06.02 22:23:10 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 7282
2020.06.02 22:23:10 2: PRESENCE (Handy_Benjamin) - device could not be checked (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:23:10 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 7283
2020.06.02 22:23:10 2: PRESENCE (Handy_Chris) - device could not be checked (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:23:10 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 7284
2020.06.02 22:23:10 2: PRESENCE (Tablet_Claudia) - device could not be checked (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:23:11 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 7292
2020.06.02 22:23:11 2: PRESENCE (Handy_Juergen) - device could not be checked (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:23:11 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 7293
2020.06.02 22:23:11 2: PRESENCE (Gartenhaus_Modul) - device could not be checked (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:23:12 1: 192.168.178.137:9090 reappeared (LED_Kueche)
2020.06.02 22:23:14 3: YAMAHA_AVR (Yamaha) - device Yamaha reappeared
2020.06.02 22:23:46 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 7557
2020.06.02 22:23:46 2: PRESENCE (LCGateway_Modul2) - device could not be checked (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:23:47 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 7564
2020.06.02 22:23:47 2: PRESENCE (Heizung_Modul) - device could not be checked (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:23:47 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 7565
2020.06.02 22:23:47 2: PRESENCE (Sonne_Lux_Modul) - device could not be checked (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:23:47 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 7566
2020.06.02 22:23:47 2: PRESENCE (Handy_Claudia) - device could not be checked (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:23:47 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 7573
2020.06.02 22:23:47 2: PRESENCE (Keller_Modul) - device could not be checked (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:23:47 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 7574
2020.06.02 22:23:47 2: PRESENCE (Kueche_Modul) - device could not be checked (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:23:47 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 7575
2020.06.02 22:23:47 2: PRESENCE (LCGateway_Modul) - device could not be checked (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:23:47 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 7576
2020.06.02 22:23:47 2: PRESENCE (PC_Juergen_P) - device could not be checked (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:23:47 3: YAMAHA_AVR (Yamaha) - could not execute command on device Yamaha. Please turn on your device in case of deactivated network standby or check for correct hostaddress.
2020.06.02 22:24:13 2: LED_Kueche: EspLedController_ParseBoolResult error: http://192.168.178.137/config?: empty answer received
2020.06.02 22:24:13 1: sduino: SD_BELL_Parse UNDEFINED BELL detected, Protocol 42 code E2143CD
2020.06.02 22:24:13 1: [Shelly_status] has error connect to http://192.168.178.142:80 timed out
2020.06.02 22:24:13 1: [Shelly_status] has error connect to http://192.168.178.143:80 timed out
2020.06.02 22:24:13 1: [Shelly_status] has error connect to http://192.168.178.141:80 timed out
2020.06.02 22:24:14 1: [Shelly_status] has error connect to http://192.168.178.25:80 timed out
2020.06.02 22:24:14 1: [Shelly_status] has error write to http://192.168.178.27:80 timed out
2020.06.02 22:24:14 1: [Shelly_status] has error write to http://192.168.178.26:80 timed out
2020.06.02 22:24:14 1: [Shelly_status] has error write to http://192.168.178.139:80 timed out
2020.06.02 22:24:15 1: Timeout for SYSMON_blockingCall reached, terminated process 7939
2020.06.02 22:24:15 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 7941
2020.06.02 22:24:15 2: PRESENCE (Handy_Vivian) - device could not be checked (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:24:42 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 8038
2020.06.02 22:24:42 2: PRESENCE (Handy_Alina) - device could not be checked after 1 retry (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:24:42 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 8045
2020.06.02 22:24:42 2: PRESENCE (Handy_Benjamin) - device could not be checked after 1 retry (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:24:42 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 8046
2020.06.02 22:24:42 2: PRESENCE (Handy_Chris) - device could not be checked after 1 retry (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:24:42 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 8047
2020.06.02 22:24:42 2: PRESENCE (Tablet_Claudia) - device could not be checked after 1 retry (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:24:42 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 8048
2020.06.02 22:24:42 2: PRESENCE (Handy_Juergen) - device could not be checked after 1 retry (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:24:42 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 8049
2020.06.02 22:24:42 2: PRESENCE (Gartenhaus_Modul) - device could not be checked after 1 retry (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:25:09 1: [Shelly_status] has error write to http://192.168.178.139:80 timed out
2020.06.02 22:25:09 3: LED_Kueche: EspLedController_CheckConnection: Connection lost! Last data received 82 s ago
2020.06.02 22:25:09 1: 192.168.178.137:9090 disconnected, waiting to reappear (LED_Kueche)
2020.06.02 22:25:11 2: LED_Kueche: error http://192.168.178.137/config?: empty answer received retrieving config
2020.06.02 22:25:11 1: Timeout for SYSMON_blockingCall reached, terminated process 8633
2020.06.02 22:25:12 1: 192.168.178.137:9090 reappeared (LED_Kueche)
2020.06.02 22:25:13 3: YAMAHA_AVR (Yamaha) - device Yamaha reappeared
2020.06.02 22:25:18 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 8581
2020.06.02 22:25:18 2: PRESENCE (LCGateway_Modul2) - device could not be checked after 1 retry (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:25:18 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 8582
2020.06.02 22:25:18 2: PRESENCE (Heizung_Modul) - device could not be checked after 1 retry (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:25:18 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 8583
2020.06.02 22:25:18 2: PRESENCE (Sonne_Lux_Modul) - device could not be checked after 1 retry (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:25:18 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 8590
2020.06.02 22:25:18 2: PRESENCE (Handy_Claudia) - device could not be checked after 1 retry (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:25:18 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 8591
2020.06.02 22:25:18 2: PRESENCE (Keller_Modul) - device could not be checked after 1 retry (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:25:18 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 8599
2020.06.02 22:25:18 2: PRESENCE (Kueche_Modul) - device could not be checked after 1 retry (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:25:18 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 8602
2020.06.02 22:25:18 2: PRESENCE (LCGateway_Modul) - device could not be checked after 1 retry (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:25:18 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 8613
2020.06.02 22:25:18 2: PRESENCE (PC_Juergen_P) - device could not be checked after 1 retry (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:25:18 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 8632
2020.06.02 22:25:18 2: PRESENCE (PC_Juergen1) - device could not be checked (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:25:18 3: FS20 set Synology off
2020.06.02 22:25:30 3: YAMAHA_AVR (Yamaha) - could not execute command on device Yamaha. Please turn on your device in case of deactivated network standby or check for correct hostaddress.
2020.06.02 22:25:55 1: [Shelly_status] has error write to http://192.168.178.139:80 timed out
2020.06.02 22:25:56 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 8864
2020.06.02 22:25:56 2: PRESENCE (Handy_Vivian) - device could not be checked after 1 retry (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:26:02 1: BlockingInformParent (BlockingRegisterTelnet): Can't connect to localhost:42309: IO::Socket::INET: connect: Connection timed out
2020.06.02 22:26:02 1: BlockingInformParent (BlockingRegisterTelnet): Can't connect to localhost:42309: IO::Socket::INET: connect: Connection timed out
2020.06.02 22:26:22 3: LED_Kueche: got info response
2020.06.02 22:26:22 2: LED_Kueche: error http://192.168.178.137/info?: empty answer received retrieving info
2020.06.02 22:26:22 1: [Shelly_status] has error write to http://192.168.178.25:80 timed out
2020.06.02 22:26:23 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 9185
2020.06.02 22:26:23 2: PRESENCE (Handy_Alina) - device could not be checked after 2 retries (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:26:23 2: PRESENCE (PC_Juergen_P) - device could not be checked after 2 retries (retrying in 10 seconds): Process died prematurely
2020.06.02 22:26:23 2: PRESENCE (PC_Juergen1) - device could not be checked after 1 retry (retrying in 10 seconds): Process died prematurely
2020.06.02 22:26:23 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 9186
2020.06.02 22:26:23 2: PRESENCE (Handy_Benjamin) - device could not be checked after 2 retries (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:26:23 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 9187
2020.06.02 22:26:23 2: PRESENCE (Handy_Chris) - device could not be checked after 2 retries (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:26:23 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 9188
2020.06.02 22:26:23 2: PRESENCE (Tablet_Claudia) - device could not be checked after 2 retries (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:26:23 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 9189
2020.06.02 22:26:23 2: PRESENCE (Handy_Juergen) - device could not be checked after 2 retries (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:26:23 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 9190
2020.06.02 22:26:23 2: PRESENCE (Gartenhaus_Modul) - device could not be checked after 2 retries (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:26:23 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 9197
2020.06.02 22:26:23 2: PRESENCE (AnzeigeFlur_Modul) - device could not be checked (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:26:23 1: Timeout for SYSMON_blockingCall reached, terminated process 9277
2020.06.02 22:26:28 1: BlockingInformParent (BlockingRegisterTelnet): Can't connect to localhost:42309: IO::Socket::INET: connect: Connection timed out
2020.06.02 22:26:51 1: [Shelly_status] has error read from http://192.168.178.142:80 timed out
2020.06.02 22:26:51 1: [Shelly_status] has error write to http://192.168.178.139:80 timed out
2020.06.02 22:26:51 1: [Shelly_status] has error read from http://192.168.178.26:80 timed out
2020.06.02 22:26:51 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 9375
2020.06.02 22:26:51 2: PRESENCE (LCGateway_Modul2) - device could not be checked after 2 retries (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:26:51 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 9376
2020.06.02 22:26:51 2: PRESENCE (Heizung_Modul) - device could not be checked after 2 retries (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:26:51 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 9378
2020.06.02 22:26:51 2: PRESENCE (Sonne_Lux_Modul) - device could not be checked after 2 retries (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:26:51 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 9383
2020.06.02 22:26:51 2: PRESENCE (Handy_Claudia) - device could not be checked after 2 retries (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:26:51 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 9385
2020.06.02 22:26:51 2: PRESENCE (Keller_Modul) - device could not be checked after 2 retries (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:26:51 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 9386
2020.06.02 22:26:51 2: PRESENCE (Kueche_Modul) - device could not be checked after 2 retries (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:26:51 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 9387
2020.06.02 22:26:51 2: PRESENCE (LCGateway_Modul) - device could not be checked after 2 retries (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:26:51 3: LED_Kueche: EspLedController_CheckConnection: Connection lost! Last data received 81 s ago
2020.06.02 22:26:51 1: 192.168.178.137:9090 disconnected, waiting to reappear (LED_Kueche)
2020.06.02 22:26:52 3: ESPEasy LCD_Display_2004: set LCD_Display_2004 lcdcmd off
2020.06.02 22:26:55 1: BlockingInformParent (BlockingRegisterTelnet): Can't connect to localhost:42309: IO::Socket::INET: connect: Connection timed out
2020.06.02 22:26:55 2: LED_Kueche: error http://192.168.178.137/color?: empty answer received retrieving color
2020.06.02 22:26:55 1: 192.168.178.137:9090 reappeared (LED_Kueche)
2020.06.02 22:26:55 1: BlockingInformParent (BlockingRegisterTelnet): Can't connect to localhost:42309: IO::Socket::INET: connect: Connection timed out
2020.06.02 22:26:56 3: YAMAHA_AVR (Yamaha) - device Yamaha reappeared
2020.06.02 22:26:57 1: Timeout for PRESENCE_DoLocalPingScan reached, terminated process 9608
2020.06.02 22:26:57 2: PRESENCE (AnzeigeBuero_Modul) - device could not be checked (retrying in 10 seconds): Timeout: process terminated
2020.06.02 22:26:57 3: FS20 set Subwoofer off
2020.06.02 22:27:01 3: LED_Kueche: got info response
2020.06.02 22:27:01 3: LED_Kueche: info response data {"deviceid":"10981707","current_rom":"1","git_version":"4.2.0-rc1","git_date":"2019-06-26","webapp_version":"0.3.3-shojo7","sming":"3.8.0","event_num_clients":1,"uptime":1384500,"heap_free":27376,"rgbww":{"version":"0.9.0","queuesize":100},"connection":{"connected":true,"ssid":"JS","dhcp":true,"ip":"192.168.178.137","netmask":"255.255.255.0","gateway":"192.168.178.1","mac":"840d8ea7914b"}}
2020.06.02 22:27:01 2: PRESENCE (Handy_Vivian) - device could not be checked after 2 retries (retrying in 10 seconds): Process died prematurely
2020.06.02 22:27:06 3: ESPEasy LCD_Display_2004: set LCD_Display_2004 lcdcmd on
2020.06.02 22:27:06 3: ESPEasy LCD_Display_2004: set LCD_Display_2004 lcdcmd clear
2020.06.02 22:27:06 3: ESPEasy LCD_Display_2004: set LCD_Display_2004 lcd 1 1 Aussentemp: 25.2'C
2020.06.02 22:27:06 3: ESPEasy LCD_Display_2004: set LCD_Display_2004 lcd 2 1 Aussenfeuchte: 37%rF
2020.06.02 22:27:07 3: ESPEasy LCD_Display_2004: set LCD_Display_2004 lcd 3 1 Wohnzimmer: 25'C
2020.06.02 22:27:07 3: ESPEasy LCD_Display_2004: set LCD_Display_2004 lcd 4 1 Alina: 26'C
2020.06.02 22:27:08 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 22:27:13 3: LED_Kueche: got info response
2020.06.02 22:27:13 3: LED_Kueche: info response data {"deviceid":"10981707","current_rom":"1","git_version":"4.2.0-rc1","git_date":"2019-06-26","webapp_version":"0.3.3-shojo7","sming":"3.8.0","event_num_clients":1,"uptime":1384500,"heap_free":25536,"rgbww":{"version":"0.9.0","queuesize":100},"connection":{"connected":true,"ssid":"JS","dhcp":true,"ip":"192.168.178.137","netmask":"255.255.255.0","gateway":"192.168.178.1","mac":"840d8ea7914b"}}
2020.06.02 22:27:16 2: PRESENCE (PC_Juergen_P) - check returned a valid result after 3 unsuccesful retries
2020.06.02 22:27:17 2: PRESENCE (PC_Juergen1) - check returned a valid result after 2 unsuccesful retries
2020.06.02 22:27:17 3: FS20 set Synology off
2020.06.02 22:27:19 2: PRESENCE (Handy_Vivian) - check returned a valid result after 3 unsuccesful retries
2020.06.02 22:27:20 3: CUL_HM set Warmwasserpumpe on
2020.06.02 22:27:22 2: PRESENCE (Handy_Chris) - check returned a valid result after 3 unsuccesful retries
2020.06.02 22:27:22 2: PRESENCE (Handy_Alina) - check returned a valid result after 3 unsuccesful retries
2020.06.02 22:27:22 2: PRESENCE (Handy_Benjamin) - check returned a valid result after 3 unsuccesful retries
2020.06.02 22:27:23 2: PRESENCE (AnzeigeFlur_Modul) - check returned a valid result after 1 unsuccesful retry
2020.06.02 22:27:23 2: PRESENCE (Handy_Juergen) - check returned a valid result after 3 unsuccesful retries
2020.06.02 22:27:23 2: PRESENCE (Heizung_Modul) - check returned a valid result after 3 unsuccesful retries
2020.06.02 22:27:23 2: PRESENCE (Gartenhaus_Modul) - check returned a valid result after 3 unsuccesful retries
2020.06.02 22:27:24 2: PRESENCE (Sonne_Lux_Modul) - check returned a valid result after 3 unsuccesful retries
2020.06.02 22:27:24 2: PRESENCE (LCGateway_Modul2) - check returned a valid result after 3 unsuccesful retries
2020.06.02 22:27:26 2: PRESENCE (Keller_Modul) - check returned a valid result after 3 unsuccesful retries
2020.06.02 22:27:26 2: PRESENCE (Kueche_Modul) - check returned a valid result after 3 unsuccesful retries
2020.06.02 22:27:26 2: PRESENCE (LCGateway_Modul) - check returned a valid result after 3 unsuccesful retries
2020.06.02 22:27:26 2: PRESENCE (AnzeigeBuero_Modul) - check returned a valid result after 1 unsuccesful retry
2020.06.02 22:27:32 2: PRESENCE (Tablet_Claudia) - check returned a valid result after 3 unsuccesful retries
2020.06.02 22:27:34 2: PRESENCE (Handy_Claudia) - check returned a valid result after 3 unsuccesful retries
2020.06.02 22:27:50 3: CUL_HM set Warmwasserpumpe on
2020.06.02 22:27:50 2: _VorlageDOIF_Temp: set XXX on: Please define XXX first
2020.06.02 22:30:19 2: _VorlageDOIF_Temp: set XXX off: Please define XXX first
2020.06.02 22:32:16 3: Watchdog PC_Juergenw1 triggered
2020.06.02 22:33:15 1: sduino: SD_BELL_Parse UNDEFINED BELL detected, Protocol 42 code D2FC414
2020.06.02 22:33:20 3: CUL_HM set Warmwasserpumpe off
2020.06.02 22:33:20 3: FS20 set FS20_Taster2 off
2020.06.02 22:34:51 1: sduino: SD_UT_Parse UNDEFINED sensor unknown detected, protocol 34, data 0CD6F, code 0CD
2020.06.02 22:37:15 1: sduino: SD_BELL_Parse UNDEFINED BELL detected, Protocol 42 code E20841B
2020.06.02 22:37:15 1: sduino: SD_BELL_Parse UNDEFINED BELL detected, Protocol 42 code C410836
2020.06.02 22:38:51 1: sduino: SD_BELL_Parse UNDEFINED BELL detected, Protocol 42 code E20841B
2020.06.02 22:41:46 3: FS20 set Wohnzimmer off
2020.06.02 22:41:46 3: sduino IT_set: Kueche_3 off
2020.06.02 22:41:48 3: CUL_HM set Lampe_Flur 8
2020.06.02 22:41:50 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 22:41:51 3: CUL_HM set Lampe_Flur off
2020.06.02 22:42:19 3: Watchdog Viviandaw triggered
2020.06.02 22:42:22 3: Watchdog Chrisdaw triggered
2020.06.02 22:42:51 1: sduino: SD_BELL_Parse UNDEFINED BELL detected, Protocol 42 code E20640E
2020.06.02 22:42:52 3: LED_Wohnz_Decke: EspLedController_CheckConnection: Connection lost! Last data received 81 s ago
2020.06.02 22:42:52 1: 192.168.178.109:9090 disconnected, waiting to reappear (LED_Wohnz_Decke)
2020.06.02 22:43:39 1: sduino: SD_BELL_Parse UNDEFINED BELL detected, Protocol 42 code C40C81D
2020.06.02 22:43:46 3: LED_Kueche: EspLedController_RGB2HSV: 0 - 0 - 0
2020.06.02 22:44:27 1: sduino: SD_BELL_Parse UNDEFINED BELL detected, Protocol 42 code F4BF103
2020.06.02 22:44:55 2: LED_Wohnz_Decke: EspLedController_ParseBoolResult error: 192.168.178.109: Keine Route zum Zielrechner (113)
2020.06.02 22:47:38 1: sduino: SD_BELL_Parse UNDEFINED BELL detected, Protocol 42 code A5F8811
2020.06.02 22:50:00 3: FS20 set Wohnzimmer off
2020.06.02 22:50:00 3: sduino IT_set: Kueche_3 off
2020.06.02 22:50:01 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.02 22:50:03 3: CUL_HM set Lampe_Flur off
2020.06.02 22:50:04 1: sduino: SD_BELL_Parse UNDEFINED BELL detected, Protocol 42 code E202415
2020.06.02 22:55:45 3: CUL_HM set Warmwasserpumpe off
2020.06.02 22:58:50 1: sduino: SD_BELL_Parse UNDEFINED BELL detected, Protocol 42 code E20042D
2020.06.02 22:59:39 1: sduino: SD_BELL_Parse UNDEFINED BELL detected, Protocol 42 code E20042D
2020.06.02 23:04:27 1: sduino: SD_BELL_Parse UNDEFINED BELL detected, Protocol 42 code D2FC3FC
2020.06.02 23:06:03 1: sduino: SD_BELL_Parse UNDEFINED BELL detected, Protocol 42 code F10AC59
2020.06.02 23:06:03 1: sduino: SD_BELL_Parse UNDEFINED BELL detected, Protocol 42 code F4BF0FE
2020.06.02 23:06:03 1: sduino: SD_BELL_Parse UNDEFINED BELL detected, Protocol 42 code F4BF0FE
2020.06.02 23:06:51 1: sduino: SD_BELL_Parse UNDEFINED BELL detected, Protocol 42 code E1FC42B
2020.06.02 23:09:16 3: Watchdog Juergendaw triggered
2020.06.02 23:10:51 1: sduino: SD_BELL_Parse UNDEFINED BELL detected, Protocol 42 code F10AC59
2020.06.02 23:10:51 1: sduino: SD_BELL_Parse UNDEFINED BELL detected, Protocol 42 code F4BF0FE
2020.06.02 23:11:26 3: LaCrosse: Unknown device 22, please define it
2020.06.02 23:12:27 1: sduino: SD_BELL_Parse UNDEFINED BELL detected, Protocol 42 code E90BAE7
2020.06.02 23:14:51 1: sduino: SD_BELL_Parse UNDEFINED BELL det

Nielsiwilsi · 03 Juni 2020, 12:52:40

Das sieht mir gerade nach einem Netzwerk Problem aus. Ich hatte mal was Ähnliches als ich im Router einen DNS Server falsch eingetragen hatte.
Überleg mal, ob in deinem Netz zu dieser Zeit immer wieder gleiches passiert. Das wär meine erste Idee, und dann müsste man sich als Zweites anschauen, wie dein LAN/WLAN aufgebaut ist.

Wernieman · 03 Juni 2020, 13:14:12

Um es mal zu Ergänzen:
Guckt sich jemand zu Der Zeit einen Stream an?

Wenn ich es richtig sehe, sind alle Deine betroffenen Geräte per Netzwerk angeschlossen ...

Jogi · 03 Juni 2020, 14:54:48

Danke für Eure Antworten.
Ich habe mir natürlich auch schon darüber Gedanken gemacht, WAS da jeden Abend ungefähr zu dieser Zeit passiert.
Mir ist aber nichts eingefallen. Bei mir wird soweit alles durch FHEM gesteuert und ich kann auch im Logfile keine verantwortliches Gerät erkennen. Das kann aber auch auf meine mangelnden Kenntnisse zurückzuführen sein.
Und "ja" es scheint irgendwie mit dem Netzwerk zusammen zu hängen, konkret mit dem Wlan, denn alle betroffenen Geräte hängen über Wlan an FHEM.

Für mich -als relativen Laien- sieht es so aus, als würde sich da was hochschaukeln. Es fängt in FHEM mit einem Problem (timeout eines Wlan-Device) an und dann kommen immer mehr dazu.
Und dann, wie von Zauberhand, ist der Spuck nach einer Weile wieder vorbei.
Und das jeden Abend ungefähr zur selben Zeit.
Komischerweise kann ich aber mit z.B. meinem Tablet zum selben Zeitpunkt der Probleme ganz normal über Wlan im Internet surfen und auch auf die -bei FHEM- ausgefallenen Geräte zugreifen.
Das verstehe ich nicht.
Für mich sieht es so aus, als sei nur FHEM betroffen. Ich kann mich aber irren.

Wernieman · 03 Juni 2020, 15:04:33

FEHM läuft auf was für Hardware?

Jogi · 03 Juni 2020, 17:23:22

Zitat von: Wernieman am 03 Juni 2020, 15:04:33
FEHM läuft auf was für Hardware?

Raspi 3B
Ist per LAN angeschlossen.

Wernieman · 03 Juni 2020, 18:59:09

Sag mal, was sagt das syslog/kern.log zu der Zeit?

amenomade · 03 Juni 2020, 21:02:12

Zitat von: Jogi am 03 Juni 2020, 14:54:48
Ich habe mir natürlich auch schon darüber Gedanken gemacht, WAS da jeden Abend ungefähr zu dieser Zeit passiert.

Vielleicht dein Backup?

Jogi · 04 Juni 2020, 12:48:29

Zitat von: Wernieman am 03 Juni 2020, 18:59:09
Sag mal, was sagt das syslog/kern.log zu der Zeit?

Hier mal ein Auszug aus syslog:

Code Auswählen

Jun  1 20:17:01 raspberrypi CRON[7278]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Jun  1 21:17:01 raspberrypi CRON[14660]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Jun  1 21:55:12 raspberrypi systemd[1]: Starting Daily apt download activities...
Jun  1 21:55:14 raspberrypi systemd[1]: apt-daily.service: Succeeded.
Jun  1 21:55:14 raspberrypi systemd[1]: Started Daily apt download activities.
Jun  1 22:17:01 raspberrypi CRON[22051]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Jun  1 23:17:01 raspberrypi CRON[29193]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)

Beim Kern.log tappe ich etwas im Dunkeln und habe nur das hier gefunden:

Code Auswählen

May 30 11:17:49 raspberrypi kernel: [4059800.857195] TCP: request_sock_TCP: Possible SYN flooding on port 8383. Sending cookies.  Check SNMP counters.

Mir sagt das alles nichts.

Allerdings ist mir gestern aufgefallen, dass die Probleme nicht aufgetreten sind. Oder sie waren für mich zumindest nicht spürbar.
Bei meinen Überlegungen, was anders war, ist mir aufgefallen, dass der Fernseher nicht lief.
Nun frage ich mich natürlich, ob es am ENIGMA-Modul für meine VU+ Box oder an meinem Sourroundreceiver, der mit dem YAMAHA_AVR Modul läuft liegen kann.

Die Fehlermeldungen gestern sind zwar nicht weg, aber es sind deutlich weniger timeout-Meldungen.

Code Auswählen

2020.06.03 21:07:29 3: LED_Kueche: EspLedController_RGB2HSV: 1023 - 1023 - 1023
2020.06.03 21:07:32 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.03 21:07:34 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.03 21:07:42 1: [Shelly_status]  has error write to http://192.168.178.27:80 timed out
2020.06.03 21:07:42 1: [Shelly_status]  has error write to http://192.168.178.143:80 timed out
2020.06.03 21:07:42 1: [Shelly_status]  has error read from http://192.168.178.25:80 timed out
2020.06.03 21:07:43 1: [Shelly_status]  has error read from http://192.168.178.141:80 timed out
2020.06.03 21:07:43 1: [Shelly_status]  has error write to http://192.168.178.139:80 timed out
2020.06.03 21:07:43 1: [Shelly_status]  has error write to http://192.168.178.142:80 timed out
2020.06.03 21:09:02 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.03 21:10:32 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.03 21:10:55 3: LED_Kueche: EspLedController_RGB2HSV: 521.529411764706 - 104.305882352941 - 369.082352941176
2020.06.03 21:11:25 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.03 21:11:41 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcdcmd on
2020.06.03 21:11:42 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcdcmd clear
2020.06.03 21:11:42 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 1 1 Aussen: 24.35
2020.06.03 21:11:42 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 1 14 'C
2020.06.03 21:11:42 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 1 Pool:
2020.06.03 21:11:42 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 9 21.87
2020.06.03 21:11:42 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 14 'C
2020.06.03 21:12:02 3: CUL_HM set Lampe_Flur 90 0 3
2020.06.03 21:12:32 3: ESPEasy LCD_Display_2004: set LCD_Display_2004 lcdcmd off
2020.06.03 21:14:03 1: sduino: SD_BELL_Parse UNDEFINED BELL detected, Protocol 42 code F4BF0F3
2020.06.03 21:16:42 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcdcmd on
2020.06.03 21:16:42 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcdcmd clear
2020.06.03 21:16:42 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 1 1 Aussen: 24.15
2020.06.03 21:16:42 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 1 14 'C
2020.06.03 21:16:42 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 1 Pool:
2020.06.03 21:16:42 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 9 21.81
2020.06.03 21:16:43 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 14 'C
2020.06.03 21:17:34 3: CUL_HM set Lampe_Flur 8
2020.06.03 21:18:03 1: sduino: SD_UT_Parse UNDEFINED sensor unknown detected, protocol 34, data 7866E, code 786
2020.06.03 21:19:39 1: sduino: SD_BELL_Parse UNDEFINED BELL detected, Protocol 42 code A5F8791
2020.06.03 21:20:27 1: sduino: SD_UT_Parse UNDEFINED sensor unknown detected, protocol 34, data DDE13, code DDE
2020.06.03 21:21:43 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcdcmd on
2020.06.03 21:21:43 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcdcmd clear
2020.06.03 21:21:43 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 1 1 Aussen: 24
2020.06.03 21:21:43 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 1 14 'C
2020.06.03 21:21:43 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 1 Pool:
2020.06.03 21:21:43 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 9 21.81
2020.06.03 21:21:43 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 14 'C
2020.06.03 21:24:27 1: sduino: SD_BELL_Parse UNDEFINED BELL detected, Protocol 42 code 87910F6
2020.06.03 21:24:32 3: CUL_HM set Lampe_Flur 8
2020.06.03 21:26:43 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcdcmd on
2020.06.03 21:26:43 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcdcmd clear
2020.06.03 21:26:43 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 1 1 Aussen: 23.9
2020.06.03 21:26:43 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 1 14 'C
2020.06.03 21:26:44 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 1 Pool:
2020.06.03 21:26:44 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 9 21.81
2020.06.03 21:26:44 3: ESPEasy LCD_Display_Pool: set LCD_Display_Pool lcd 2 14 'C
2020.06.03 21:28:09 1: No Logdevice >FileLog_Helligkeit<
2020.06.03 21:28:12 1: No Logdevice >FileLog_Helligkeit<
2020.06.03 21:28:42 3: CUL_HM set HM_36055C_Sw_01 on
2020.06.03 21:28:45 3: FS20 set Gartenbeleuchtung on
2020.06.03 21:28:46 3: CUL_HM set HM_36055C_Sw_02 on
2020.06.03 21:29:49 1: 192.168.178.138:9090 reappeared (LED_Band_Terrasse)
2020.06.03 21:29:49 3: LED_Band_Terrasse: EspLedController_RGB2HSV: 204.6 - 473.388235294118 - 541.588235294118
2020.06.03 21:29:50 3: LED_Band_Terrasse: got info response
2020.06.03 21:29:50 3: LED_Band_Terrasse: info response data {"deviceid":"10963372","current_rom":"0","git_version":"4.2.0-rc1","git_date":"2019-06-26","webapp_version":"0.3.3-shojo7","sming":"3.8.0","event_num_clients":1,"uptime":60,"heap_free":27296,"rgbww":{"version":"0.9.0","queuesize":100},"connection":{"connected":true,"ssid":"JS","dhcp":true,"ip":"192.168.178.138","netmask":"255.255.255.0","gateway":"192.168.178.1","mac":"840d8ea749ac"}}
2020.06.03 21:30:31 3: LED_Wohnz_Decke: EspLedController_RGB2HSV: 521.529411764706 - 104.305882352941 - 369.082352941176
2020.06.03 21:30:33 3: CUL_HM set Lampe_Flur 8
2020.06.03 21:30:44 1: [Shelly_status]  has error write to http://192.168.178.139:80 timed out
2020.06.03 21:30:53 1: [Shelly_status]  has error read from http://192.168.178.27:80 timed out
2020.06.03 21:30:54 3: YAMAHA_AVR (Yamaha) - could not execute command on device Yamaha. Please turn on your device in case of deactivated network standby or check for correct hostaddress.
2020.06.03 21:30:54 3: nYamahaon return value: Unknown argument absent, choose one of dim06% dim100% dim12% dim18% dim25% dim31% dim37% dim43% dim50% dim56% dim62% dim68% dim75% dim81% dim87% dim93% dimdown dimup dimupdown off off-for-timer on on-100-for-timer-prev on-for-timer on-old-for-timer on-old-for-timer-prev ramp-off-time ramp-on-time reset sendstate timer toggle dim:slider,0,6.25,100 off-till off-till-overnight on-till intervals blink on-till-overnight 
2020.06.03 21:30:55 3: YAMAHA_AVR (Yamaha) - device Yamaha reappeared

Ich bin aber immer noch im Reich der Vermutungen und ziemlich ratlos.

Wernieman · 04 Juni 2020, 19:10:52

ZitatPossible SYN flooding

Zitatdass der Fernseher nicht lief.

Irgendwie erinnere ich mich, das schon irgendwann jemand Probleme damit hatte. Ist es ein Smarter Fernseher, d.h. im Netz?

Frank_Huber · 04 Juni 2020, 19:18:58

wobei Port 8383 eher für ESPEasy spricht. da wäre es der Standart-Port.

Wernieman · 04 Juni 2020, 19:25:33

Stimmt auch wieder ... ich Tippe immer noch auf Netzwerkproblem.
Ansonsten mal zu Durchlesen: https://access.redhat.com/solutions/30453
Ist zwar für RedHat, gilt aber für alle Linuxe

Frank_Huber · 04 Juni 2020, 19:34:00

Ich hatte mir vor kurzem ein ähnliches Problem selbst gebaut.

Hab an meinen 3 IP cams in fhem die Anzahl Bilder und den delay geändert, ohne die triggerung zu bedenken.
Das doif hat dann nachts bei Bewegung alle 15 Sekunden Bilder angefordert, das IPCAM Modul jedesmal im 2 sekunden takt 60 Bilder geschossen.

Dauert natürlich nicht lange bis das Netzwerk des PI an der Wand steht.
Ablage der Bilder ist auch auf dem Netzwerk.

Nachbars Katze hat also regelmäßig eine meiner Instanzen lahm gelegt. [emoji1787]

Das hat sich auch meist erst wieder beruhigt wenn die Bewegung vorbei war und es zur Ruhe kam.
Einmal half sogar nur nen harter reboot per ssh.

Der PI wird aber auch demnächst zum 4er befördert.
Mal sehen wie der sich produktiv macht.
Als Test System ist er unauffällig.

Gesendet von meinem S68Pro mit Tapatalk

Jogi · 07 Juni 2020, 16:39:57

Zitat von: Wernieman am 04 Juni 2020, 19:10:52
Irgendwie erinnere ich mich, das schon irgendwann jemand Probleme damit hatte. Ist es ein Smarter Fernseher, d.h. im Netz?

Sorry für meine späte Rückmeldung.
NEIN, es ist kein Smarter TV.
Bei mir ist nur die VU+-Box und der Receiver (Yamaha) mit dem LAN verbunden.
Und gestreamt wurde zu der Zeit auch nichts.

Code Auswählen

Possible SYN flooding
könnte mit aber weiter helfen. Ich wusste bis zu dem Post nicht was das bedeutet und habe jetzt mal etwas im Netz recherchiert.
In Verbindung mit dem Port 8383 könnte mir das den richtigen Weg weisen.
Ich nutze mehrere ESPEasy Module.
Diese werden teilweise auch in Abhängigkeit der Fernsehsituation gesteuert oder liefern Werte.
Nun könnte es natürlich schon sein, dass Aufgrund welcher Probleme auch immer die Vu+-Box z.B. meldet das sie "absent" ist und die ganze Batterie an Schaltungen Meldungen geht los. Sollte die Box dann melden, dass sie doch "on" ist, kommt der nächste Schwung. Und wenn das ganze dann in schneller Abfolge, z.B. mehrmals in der Minute erfolgt könnte es schon sein, dass sich da was aufhängt. Das ist aber nur eine theoretische Möglichkeit, der ich nachgehen muss.

Ich konnte das aber noch nicht testen, da ich die letzten Tage kein Fernsehen geschaut habe.
Ich werde das aber beobachten und versuchen weitere Details herauszufinden.

So wie es aussieht hängt es aber auf jeden Fall irgendwie mit dem "Fernseh-Ereignis" zusammen, da ich die Probleme in den letzten Tagen -ohne Fernsehen- nicht hatte.

Wernieman · 07 Juni 2020, 17:32:05

Teoretisch könntest Du die "Sync-Menge" Hochschrauben, würde es aber eher es Grundsätzlich Lösen.

Kannst Du denn im Log nachvollziehen, ob der Receivber sich dauern ab/anmeldet