[73_AutoShuttersControl.pm] Rolllos automatisiert steuern - Version 0.10

Begonnen von CoolTux, 22 Juni 2020, 12:38:36

Vorheriges Thema - Nächstes Thema

gestein

Hallo,

ich hole mir mit {ascAPIget('WinStatus',$NAME)} den Grund der letzten Fahrt.
Kann man auch irgendwie den Zeitpunkt der letzten Fahrt bekommen?

Danke, lg, Gerhard

CoolTux

Zitat von: gestein am 14 Juni 2021, 09:04:34
Hallo,

ich hole mir mit {ascAPIget('WinStatus',$NAME)} den Grund der letzten Fahrt.
Kann man auch irgendwie den Zeitpunkt der letzten Fahrt bekommen?

Danke, lg, Gerhard

Nicht auf ASC bezogen. Wenn dann über den ReadingTimestamp von pct oder was auch immer Dein Reading ist
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

gestein

Manchmal sieht man den Wald vor lauter Bäumen nicht.
Klar - das sollte doch klappen.

Danke! lg, Gerhard

Bäschdler


gent

Hallo,

kann mal bitte irgendwer im Wiki die Beispiele nachvollziehbar dokumentieren? Hier werden RedingsGroups beschrieben (z.B. für die Beschattung), in denen etwas gesetzt wird, was weder im Wiki, noch in der Commendref beschrieben ist z.B. ASC_Shading_Angle_Left...

Ich verstehe es einfach nicht, warum diese existenziellen Dinge nicht einmal - durch wen auch immer - gegen gecheckt werden, ob diese nachvollziehbar sind. Und dann wird sich im Forum immer drüber beschwert, dass User "komische Fragen" stellen...

ASC ist ein ganz tolles Modul, aber durch solche Nachlässigkeit nicht zu gebrauchen, ohne sich durch 100e Seiten im Forum zu wühlen.

Es ist mir einfach immer wieder unverständlich, warum so ein tolles System wie fhem mit so vielen tollen Entwicklern, sich selbst so viele Steine in den Weg legt...

LG
fhem auf rPi3 mit USB boot und M2, cul866 (hm), homebridge, FlowerSens, Shelly, Harmony, WemosD1, Sonoff/Tasmota, grafana, mqtt/mosquitto

Spezialtrick

Erstmal ein großes Dankschön an Cooltux und alle die an diesem sehr umfangreichen Modul mitgewirkt haben!  :)

Ich habe das Modul nun auch ein gerichtet und versuche meine Homematic IP Rolladen damit zu steuern. Die automatische Fahrt morgens und abends funktioniert schon mal wie gewollt. Leider bekomme ich es nicht hin die Terrassentür, bestückt mit einem HmIP-RF, mit der Komfort- und Lüftungsöffnung zu versehen.

Außerdem scheint das Attribut ASC_shuttersDriveDelay im ASC-Modul selbst sowie ASC_Drive_Delay in den einzelnen Rolladen keine Funktion zu haben. Wobei ich hierbei eher von einem Anwenderfehler ausgehe.  :D

Vielleicht könnt ihr mir ja auf die Sprünge helfen.

Nachfolgend ein List von meine ASC Device:

Internals:
   FUUID      607e07f1-f33f-9af6-15a1-3122ecc728938f34
   FVERSION   73_AutoShuttersControl.pm:v0.10.15-s24586/2021-06-05
   MID        da39a3ee5e6b4b0d3255bfef95601890afd80709
   NAME       Rolladensteuerung
   NOTIFYDEV  GA.Lichtsensor,Rolladensteuerung,Twilight,Wz.Terrassentur.Schloss,global,GA.Markise,GWC.Rollo.Fenster,KU.Rollo.Fenster,SZ.Rollo.Fenster,WZ.Rollo.Fenster,WZ.Rollo.Terrassentur
   NR         32
   NTFY_ORDER 51-Rolladensteuerung
   STATE      manual
   TYPE       AutoShuttersControl
   VERSION    v0.10.15
   Helper:
     DBLOG:
       GA.Markise_nextAstroTimeEvent:
         DBLog:
           TIME       1623758614.41991
           VALUE      15.06.2021 - 22:00
       GWC.Rollo.Fenster_nextAstroTimeEvent:
         DBLog:
           TIME       1623758614.45525
           VALUE      15.06.2021 - 22:00
       KU.Rollo.Fenster_nextAstroTimeEvent:
         DBLog:
           TIME       1623758614.47695
           VALUE      15.06.2021 - 22:00
       SZ.Rollo.Fenster_nextAstroTimeEvent:
         DBLog:
           TIME       1623758614.50157
           VALUE      15.06.2021 - 22:00
       WZ.Rollo.Fenster_nextAstroTimeEvent:
         DBLog:
           TIME       1623758614.52748
           VALUE      15.06.2021 - 22:00
       WZ.Rollo.Terrassentur_PosValue:
         DBLog:
           TIME       1623759007.22273
           VALUE      100
       WZ.Rollo.Terrassentur_nextAstroTimeEvent:
         DBLog:
           TIME       1623758614.54983
           VALUE      15.06.2021 - 23:59
       ascEnable:
         DBLog:
           TIME       1623758946.06579
           VALUE      on
       state:
         DBLog:
           TIME       1623759007.23533
           VALUE      manual
   OLDREADINGS:
   READINGS:
     2021-06-15 13:34:13   GA.Markise_PosValue 79
     2021-06-12 05:52:50   GA.Markise_lastPosValue 100
     2021-06-15 14:03:34   GA.Markise_nextAstroTimeEvent 15.06.2021 - 22:00
     2021-06-15 07:46:09   GWC.Rollo.Fenster_PosValue 93
     2021-06-15 06:45:02   GWC.Rollo.Fenster_lastPosValue 0
     2021-06-15 14:03:34   GWC.Rollo.Fenster_nextAstroTimeEvent 15.06.2021 - 22:00
     2021-06-15 05:30:53   KU.Rollo.Fenster_PosValue 100
     2021-06-15 06:45:02   KU.Rollo.Fenster_lastPosValue 100
     2021-06-15 14:03:34   KU.Rollo.Fenster_nextAstroTimeEvent 15.06.2021 - 22:00
     2021-06-15 08:27:11   SZ.Rollo.Fenster_PosValue 96
     2021-06-15 06:45:02   SZ.Rollo.Fenster_lastPosValue 42
     2021-06-15 14:03:34   SZ.Rollo.Fenster_nextAstroTimeEvent 15.06.2021 - 22:00
     2021-05-22 21:55:21   WZ.Rollo.Fenster WZ.Rollo.Fenster_lastPosValue 0
     2021-06-15 12:49:43   WZ.Rollo.Fenster_PosValue 100
     2021-06-08 05:54:04   WZ.Rollo.Fenster_lastDelayPosValue 100
     2021-06-15 06:45:02   WZ.Rollo.Fenster_lastPosValue 0
     2021-06-15 14:03:34   WZ.Rollo.Fenster_nextAstroTimeEvent 15.06.2021 - 22:00
     2021-05-22 21:55:21   WZ.Rollo.Terrassent_r WZ.Rollo.Terrassent_r_lastPosValue 0
     2021-06-15 13:58:45   WZ.Rollo.Terrassent_r_PosValue 100
     2021-06-08 05:54:04   WZ.Rollo.Terrassent_r_lastDelayPosValue 100
     2021-06-15 06:45:02   WZ.Rollo.Terrassent_r_lastPosValue 82.5
     2021-06-15 14:10:07   WZ.Rollo.Terrassentur_PosValue 100
     2021-06-15 14:03:34   WZ.Rollo.Terrassentur_nextAstroTimeEvent 15.06.2021 - 23:59
     2021-06-15 14:09:06   ascEnable       on
     2021-04-20 09:50:17   controlShading  off
     2021-04-20 09:50:17   hardLockOut     off
     2021-06-10 20:54:03   partyMode       off
     2021-04-27 06:43:19   rg_ASC_Rolllaeden_Times commands {level => 'pct:0,10,20,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100',
     2021-06-15 14:03:31   room_G__ste-WC  GWC.Rollo.Fenster
     2021-06-15 14:03:31   room_Garten     GA.Markise
     2021-06-15 14:03:31   room_K__che     KU.Rollo.Fenster
     2021-06-15 14:03:31   room_Schlafzimmer SZ.Rollo.Fenster
     2021-06-15 14:03:31   room_Wohnzimmer WZ.Rollo.Fenster,WZ.Rollo.Terrassentur
     2021-04-20 09:50:17   selfDefense     off
     2021-06-15 14:10:07   state           manual
     2021-06-12 14:44:07   sunriseTimeWeHoliday on
     2021-06-15 14:03:31   userAttrList    rolled out
   helper:
     shuttersList:
       GA.Markise
       GWC.Rollo.Fenster
       KU.Rollo.Fenster
       SZ.Rollo.Fenster
       WZ.Rollo.Fenster
       WZ.Rollo.Terrassentur
   monitoredDevs:
     GA.Lichtsensor:
       GA.Markise ASC_BrightnessSensor
       WZ.Rollo.Fenster ASC_BrightnessSensor
     Twilight:
       Rolladensteuerung ASC_twilightDevice
     WZ.Rollo.Terrassentur:
     Wz.Terrassentur.Schloss:
       WZ.Rollo.Terrassentur ASC_WindowRec
Attributes:
   ASC_advDate DeadSunday
   ASC_autoAstroModeEvening CIVIL
   ASC_autoAstroModeMorning CIVIL
   ASC_autoShuttersControlComfort on
   ASC_autoShuttersControlEvening on
   ASC_autoShuttersControlMorning on
   ASC_expert 1
   ASC_shuttersDriveDelay 300
   ASC_tempSensor MQTT2_zigbee_WZ.Klima:temperature
   ASC_twilightDevice Twilight
   devStateIcon { ShuttersControl_DevStateIcon($name) }
   group      Rolladen Automatik
   icon       fts_shutter_automatic
   room       Haus


Ein List von meiner Terrassentür:

Internals:
   DEF        00111BE9A41FB1
   FUUID      60776709-f33f-9af6-ebaf-9cee702827ae4a92
   IODev      Debmatic
   NAME       WZ.Rollo.Terrassentur
   NR         26
   STATE      open
   TYPE       HMCCUDEV
   ccuaddr    00111BE9A41FB1
   ccudevstate active
   ccuif      HmIP-RF
   ccuname    WZ.Rollo.Terrassentur
   ccutype    HmIP-BROLL
   channels   8
   firmware   1.8.20
   statevals  devstate
   Helper:
     DBLOG:
       3.ACTIVITY_STATE:
         DBLog:
           TIME       1623759007.2031
           VALUE      stop
       3.LEVEL:
         DBLog:
           TIME       1623759007.2031
           VALUE      open
       4.ACTIVITY_STATE:
         DBLog:
           TIME       1623759007.2031
           VALUE      stop
       control:
         DBLog:
           TIME       1623759007.2031
           VALUE      100
       hmstate:
         DBLog:
           TIME       1623759007.2031
           VALUE      open
       pct:
         DBLog:
           TIME       1623759007.2031
           VALUE      100
       state:
         DBLog:
           TIME       1623759007.2031
           VALUE      open
   READINGS:
     2021-06-15 14:03:43   0.ACTUAL_TEMPERATURE 31.0
     2021-06-15 14:03:43   0.ACTUAL_TEMPERATURE_STATUS normal
     2021-04-19 19:49:06   0.CONFIG_PENDING 0
     2021-04-19 19:49:06   0.DUTY_CYCLE    0
     2021-06-15 14:03:43   0.ERROR_CODE    0
     2021-06-15 14:03:43   0.ERROR_OVERHEAT no
     2021-04-19 19:49:06   0.RSSI_DEVICE   -44
     2021-04-19 06:33:00   0.RSSI_PEER     -58
     2021-04-19 19:49:06   0.UNREACH       0
     2021-06-15 14:10:07   3.ACTIVITY_STATE stop
     2021-06-15 14:10:07   3.LEVEL         open
     2021-06-15 14:10:07   3.LEVEL_STATUS  0
     2021-04-19 19:49:06   3.PROCESS       0
     2021-04-19 19:49:06   3.SECTION       15
     2021-06-15 14:03:43   3.SELF_CALIBRATION_RESULT ok
     2021-06-15 14:10:07   4.ACTIVITY_STATE stop
     2021-04-19 19:49:06   4.LEVEL         1.0
     2021-04-19 19:49:06   4.LEVEL_STATUS  0
     2021-04-19 19:49:06   4.PROCESS       0
     2021-04-19 19:49:06   4.SECTION       4
     2021-06-15 14:10:07   5.ACTIVITY_STATE stop
     2021-04-19 19:49:06   5.LEVEL         0.0
     2021-04-19 19:49:06   5.LEVEL_STATUS  0
     2021-04-19 19:49:06   5.PROCESS       0
     2021-04-19 19:49:06   5.SECTION       0
     2021-06-15 14:10:07   6.ACTIVITY_STATE stop
     2021-04-19 19:49:06   6.LEVEL         0.0
     2021-04-19 19:49:06   6.LEVEL_STATUS  0
     2021-04-19 19:49:06   6.PROCESS       0
     2021-04-19 19:49:06   6.SECTION       0
     2021-04-19 19:49:06   7.WEEK_PROGRAM_CHANNEL_LOCKS 0
     2021-04-20 00:56:24   ASC_Enable      on
     2021-04-26 23:56:02   ASC_ShadingMessage <html> INFO:  shading was deactivated in the device </html>
     2021-06-15 14:10:07   ASC_ShuttersLastDrive manual
     2021-06-15 14:09:26   ASC_Time_DriveDown 15.06.2021 - 23:59
     2021-06-15 14:09:26   ASC_Time_DriveUp 16.06.2021 - 06:45
     2021-06-15 14:03:31   IODev           Debmatic
     2021-06-15 14:10:07   activity        alive
     2021-06-15 14:03:31   associatedWith  Rolladensteuerung
     2021-06-15 14:10:07   control         100
     2021-06-15 14:10:07   hmstate         open
     2021-06-15 14:10:07   pct             100
     2021-06-15 14:10:07   state           open
   hmccu:
     devspec    00111BE9A41FB1
     dp:
       0.ACTUAL_TEMPERATURE:
         OSVAL      31.0
         OVAL       31.000000
         SVAL       31.0
         VAL        31.000000
       0.ACTUAL_TEMPERATURE_STATUS:
         OSVAL      normal
         OVAL       0
         SVAL       normal
         VAL        0
       0.CONFIG_PENDING:
         OVAL       0
         VAL        0
       0.DUTY_CYCLE:
         OVAL       0
         VAL        0
       0.ERROR_CODE:
         OSVAL      0
         OVAL       0
         SVAL       0
         VAL        0
       0.ERROR_OVERHEAT:
         OSVAL      no
         OVAL       false
         SVAL       no
         VAL        false
       0.INSTALL_TEST:
         OVAL       true
         VAL        true
       0.OPERATING_VOLTAGE:
         OVAL       0.000000
         VAL        0.000000
       0.OPERATING_VOLTAGE_STATUS:
         OVAL       0
         VAL        0
       0.RSSI_DEVICE:
         OVAL       -45
         VAL        -44
       0.RSSI_PEER:
         OVAL       200
         VAL        -55
       0.UNREACH:
         OSVAL      alive
         OVAL       0
         SVAL       alive
         VAL        0
       0.UPDATE_PENDING:
         OVAL       false
         VAL        false
       3.ACTIVITY_STATE:
         OSVAL      up
         OVAL       1
         SVAL       stop
         VAL        3
       3.LEVEL:
         OSVAL      1.5
         OVAL       0.015
         SVAL       open
         VAL        1.0
       3.LEVEL_STATUS:
         OSVAL      0
         OVAL       0
         SVAL       0
         VAL        0
       3.PROCESS:
         OVAL       1
         VAL        0
       3.SECTION:
         OVAL       15
         VAL        15
       3.SECTION_STATUS:
         OVAL       0
         VAL        0
       3.SELF_CALIBRATION_RESULT:
         OSVAL      ok
         OVAL       true
         SVAL       ok
         VAL        true
       4.ACTIVITY_STATE:
         OSVAL      up
         OVAL       1
         SVAL       stop
         VAL        3
       4.LEVEL:
         OVAL       0.0
         VAL        1.0
       4.LEVEL_STATUS:
         OVAL       0
         VAL        0
       4.PROCESS:
         OVAL       1
         VAL        0
       4.SECTION:
         OVAL       3
         VAL        4
       4.SECTION_STATUS:
         OVAL       0
         VAL        0
       5.ACTIVITY_STATE:
         OSVAL      stop
         OVAL       3
         SVAL       stop
         VAL        3
       5.LEVEL:
         OVAL       0.0
         VAL        0.0
       5.LEVEL_STATUS:
         OVAL       0
         VAL        0
       5.PROCESS:
         OVAL       0
         VAL        0
       5.SECTION:
         OVAL       0
         VAL        0
       5.SECTION_STATUS:
         OVAL       0
         VAL        0
       6.ACTIVITY_STATE:
         OSVAL      stop
         OVAL       3
         SVAL       stop
         VAL        3
       6.LEVEL:
         OVAL       0.0
         VAL        0.0
       6.LEVEL_STATUS:
         OVAL       0
         VAL        0
       6.PROCESS:
         OVAL       0
         VAL        0
       6.SECTION:
         OVAL       0
         VAL        0
       6.SECTION_STATUS:
         OVAL       0
         VAL        0
       7.WEEK_PROGRAM_CHANNEL_LOCKS:
         OVAL       0
         VAL        0
Attributes:
   ASC        2
   ASC_ComfortOpen_Pos 90
   ASC_Down   time
   ASC_LockOut soft
   ASC_Pos_Reading pct
   ASC_Shading_Mode off
   ASC_Shading_Pos 15
   ASC_ShuttersPlace window
   ASC_Time_Down_Early 23:59
   ASC_Time_Up_Early 06:45
   ASC_Time_Up_WE_Holiday 07:30
   ASC_Up     astro
   ASC_Ventilate_Pos 30
   ASC_Ventilate_Window_Open on
   ASC_WindowRec Wz.Terrassentur.Schloss
   ASC_WindowRec_subType threestate
   IODev      Debmatic
   alias      Wohnzimmer Rolladen Terrassentür
   ccureadingfilter 3.LEVEL;(ERROR_CODE|ERROR_OVERHEAT|ACTUAL_TEMPERATURE|ACTIVITY_STATE|SELF_CALIBRATION_RESULT)
   ccureadingname 3.LEVEL$:+control,+pct
   ccuscaleval LEVEL:0:1:0:100
   cmdIcon    up:fts_shutter_up stop:fts_shutter_manual down:fts_shutter_down
   controldatapoint 4.LEVEL
   event-on-change-reading .*
   eventMap   /datapoint 4.STOP true:stop/datapoint 4.LEVEL 0:down/datapoint 4.LEVEL 100:up/datapoint 3.SELF_CALIBRATION 0:stopCalibration/datapoint 3.SELF_CALIBRATION 1:startCalibration/
   group      Rolladen
   hmstatevals ACTUAL_TEMPERATURE_STATUS!2:tempOverflow,3:tempUnderflow;ERROR_OVERHEAT!(1|true):overheat
   room       Wohnzimmer
   statedatapoint 3.LEVEL
   stripnumber 1
   substexcl  control|pct
   substitute LEVEL!#0-0:closed,#100-100:open;ACTIVITY_STATE!0:unknown,1:up,2:down,3:stop;ERROR_OVERHEAT!(0|false):no,(1|true):yes;ACTUAL_TEMPERATURE_STATUS!0:normal,1:unknown,2:overflow,3:underflow;SELF_CALIBRATION_RESULT!(0|false):failed,(1|true):ok
   userattr   ASC_Adv:on,off ASC_Antifreeze:off,soft,hard,am,pm ASC_Antifreeze_Pos:5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_AutoAstroModeEvening:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeEveningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_AutoAstroModeMorning:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeMorningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_BlockingTime_afterManual ASC_BlockingTime_beforDayOpen ASC_BlockingTime_beforNightClose ASC_BrightnessSensor ASC_Closed_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_ComfortOpen_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Down:time,astro,brightness,roommate ASC_DriveUpMaxDuration ASC_Drive_Delay ASC_Drive_DelayStart ASC_ExternalTrigger ASC_GuestRoom:on,off ASC_LockOut:soft,hard,off ASC_LockOut_Cmd:inhibit,blocked,protection ASC_Mode_Down:absent,always,off,home ASC_Mode_Up:absent,always,off,home ASC_Open_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Partymode:on,off ASC_Pos_Reading ASC_PrivacyDownValue_beforeNightClose ASC_PrivacyDown_Pos ASC_PrivacyUpValue_beforeDayOpen ASC_PrivacyUp_Pos ASC_RainProtection:on,off ASC_Roommate_Device ASC_Roommate_Reading ASC_Self_Defense_AbsentDelay ASC_Self_Defense_Mode:absent,gone,off ASC_Shading_BetweenTheTime ASC_Shading_InOutAzimuth ASC_Shading_MinMax_Elevation ASC_Shading_Min_OutsideTemperature ASC_Shading_Mode:absent,always,off,home ASC_Shading_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Shading_StateChange_SunnyCloudy ASC_Shading_WaitingPeriod ASC_Shutter_IdleDetection ASC_ShuttersPlace:window,terrace,awning ASC_SlatPosCmd_SlatDevice ASC_Sleep_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_TempSensor ASC_Time_Down_Early ASC_Time_Down_Late ASC_Time_Up_Early ASC_Time_Up_Late ASC_Time_Up_WE_Holiday ASC_Up:time,astro,brightness,roommate ASC_Ventilate_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Ventilate_Window_Open:on,off ASC_WiggleValue ASC_WindParameters ASC_WindProtection:on,off ASC_WindowRec ASC_WindowRec_PosAfterDayClosed:open,lastManual ASC_WindowRec_subType:twostate,threestate
   webCmd     control:up:stop:down
   widgetOverride control:slider,0,10,100


FHEM - Debmatic - Zigbee2MQTT - Homekit

CoolTux

Fangen wir erstmal mit dem Türsensor an.

Im ASC das Attribut ASC_autoShuttersControlComfort auf on stellen.
Im Rollo Device das Attribut ShuttersPlace auf Terrace stellen



Bezüglich der Delay Geschichte lösche mal das ASC_shuttersDriveDelay im ASC Device und das ASC_Drive_Delay im Rollo Device und setze im Rollo Device ASC_DriveDelayStart. Und zwar immer um enige Sekunden versetzt pro Rollo. Also erstes Rollo mit 0 zweites Rollo mit 2 drittes mit 4 und so weiter.
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

Spezialtrick

Danke für deine Antwort.

Zitat von: CoolTux am 15 Juni 2021, 15:04:21
Fangen wir erstmal mit dem Türsensor an.

Im ASC das Attribut ASC_autoShuttersControlComfort auf on stellen.
Im Rollo Device das Attribut ShuttersPlace auf Terrace stellen

Das Attribut ASC_autoShuttersControlComfort war bereits auf on. Ich habe es erneut gesetzt.
Das Attribut ShuttersPlace steht nun auf Terrace.

Das Rollo reagiert leider weiterhin nicht auf das Öffnen der Tür.

Zitat von: CoolTux am 15 Juni 2021, 15:04:21
Bezüglich der Delay Geschichte lösche mal das ASC_shuttersDriveDelay im ASC Device und das ASC_Drive_Delay im Rollo Device und setze im Rollo Device ASC_DriveDelayStart. Und zwar immer um enige Sekunden versetzt pro Rollo. Also erstes Rollo mit 0 zweites Rollo mit 2 drittes mit 4 und so weiter.

Habe ich erledigt.
FHEM - Debmatic - Zigbee2MQTT - Homekit

D3ltorohd

Hallo,

ich habe da seit neustem ein Problem, hatte die Tage mal FHEM geupdatet, lange lange her, als ich das das letzte mal gemacht habe. Nun ist mir folgendes aufgefallen. Ich versuch es mal zu beschreiben.

Morgens 5 Uhr Rollos sind mit Sonnenuntergang am Vortag herunter gefahren. Manche Fenster sind offen zum lüften. Die Rollos wurden manuell runter gefahren, sonst würden sie in der Lüftungsstellung stehen.

So nun mache ich z.b. im Schlafzimmer das Fenster zu, damit meine Frau weiter schlafen kann, wenn es draußen lauter wird. So sobald das Fenster zu ist, fahren alle Rollos bei denen das Fenster offen ist in die Lüftungsposition ? Das Verhalten ist neu. habe seit Monaten nichts am Setting geändert und vor dem FHEM Update war das auch nicht fest zu stellen.

Hat sich hier irgendwas geändert ?
Base : Intel NUC Debian 9, FHEM aktuell || Zigbee (Coordinator FW Z-Stack 1.2 default Koenkk) || MaxCUL (culfw V 1.67 nanoCUL868) || SIGNALduino 433MHz (V 3.3.2.1-rc8 ) || Shelly s1

CoolTux

Zitat von: D3ltorohd am 15 Juni 2021, 17:52:44
Hallo,

ich habe da seit neustem ein Problem, hatte die Tage mal FHEM geupdatet, lange lange her, als ich das das letzte mal gemacht habe. Nun ist mir folgendes aufgefallen. Ich versuch es mal zu beschreiben.

Morgens 5 Uhr Rollos sind mit Sonnenuntergang am Vortag herunter gefahren. Manche Fenster sind offen zum lüften. Die Rollos wurden manuell runter gefahren, sonst würden sie in der Lüftungsstellung stehen.

So nun mache ich z.b. im Schlafzimmer das Fenster zu, damit meine Frau weiter schlafen kann, wenn es draußen lauter wird. So sobald das Fenster zu ist, fahren alle Rollos bei denen das Fenster offen ist in die Lüftungsposition ? Das Verhalten ist neu. habe seit Monaten nichts am Setting geändert und vor dem FHEM Update war das auch nicht fest zu stellen.

Hat sich hier irgendwas geändert ?

Da wird wohl eher durch Deine sehr lange Update Abstinenz sich was verklemmt haben. Mach mal bitte ein set createNewNotifyDev und zeig mal ein list vom ASC Device und von einem Rollo Device.
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

D3ltorohd

Zitat von: CoolTux am 15 Juni 2021, 18:59:46
Da wird wohl eher durch Deine sehr lange Update Abstinenz sich was verklemmt haben. Mach mal bitte ein set createNewNotifyDev und zeig mal ein list vom ASC Device und von einem Rollo Device.

Beim ersten eingeben kommt :: Please define createNewNotifyDev first  ::

Hier mal ein list von einem Rollo :

Internals:
   FUUID      5cd88084-f33f-fc62-b74e-e20fdb15779d35ac
   NAME       Buero_li
   NR         20
   STATE      open
   TYPE       ROLLO
   stoptime   1623774187
   READINGS:
     2020-08-11 16:43:13   ASC_Enable      on
     2021-06-11 21:23:03   ASC_ShadingMessage <html> WARN:  global shading active but ASC_Shading_Mode attribut is not set or off </html>
     2021-06-15 18:23:07   ASC_ShuttersLastDrive ventilate - window open
     2021-06-15 07:00:02   ASC_Time_DriveDown 15.06.2021 - 21:33
     2021-06-15 07:00:02   ASC_Time_DriveUp 16.06.2021 - 07:00
     2021-06-14 21:15:32   associatedWith  ASControl
     2021-06-15 18:22:55   command         pct-0
     2021-06-15 18:22:55   desired_pct     0
     2021-06-15 18:22:55   drive-type      modul
     2021-06-15 18:22:55   last_drive      drive-up
     2021-06-15 18:23:07   pct             100
     2021-06-15 18:23:07   state           open
Attributes:
   ASC        2
   ASC_BrightnessSensor zigbee.0.04cf8cdf3c772184.illuminance:state
   ASC_Closed_Pos 0
   ASC_ComfortOpen_Pos 90
   ASC_Drive_DelayStart 1
   ASC_Open_Pos 100
   ASC_Pos_Reading pct
   ASC_ShuttersPlace window
   ASC_Time_Up_Early 07:00
   ASC_Ventilate_Pos 100
   ASC_Ventilate_Window_Open on
   ASC_WindowRec 0_userdata.0.Jalousiesteuerung.Fenstertimeout.Buero_links_contact
   ASC_WindowRec_subType threestate
   alias      Buero_li
   cmdIcon    open:fts_shutter_up closed:fts_shutter_down stop:fts_shutter_manual half:fts_shutter_50
   devStateIcon open:fts_shutter_10:closed closed:fts_shutter_100:open half:fts_shutter_50:closed drive-up:fts_shutter_up@red:stop drive-down:fts_shutter_down@red:stop pct-100:fts_shutter_10:open pct-90:fts_shutter_10:closed pct-80:fts_shutter_20:closed pct-70:fts_shutter_30:closed pct-60:fts_shutter_40:closed pct-50:fts_shutter_50:closed pct-40:fts_shutter_60:open pct-30:fts_shutter_70:open pct-20:fts_shutter_80:open pct-10:fts_shutter_90:open pct-0:fts_shutter_100:closed
   rl_autoStop 1
   rl_commandDown set JaroFB down 10
   rl_commandStop set JaroFB stop 10
   rl_commandUp set JaroFB up 10
   rl_excessBottom 2
   rl_excessTop 0
   rl_forceDrive 1
   rl_resetTime 0
   rl_secondsDown 25
   rl_secondsUp 25
   rl_switchTime 1
   rl_type    HomeKit
   room       Jalousien,ioB_OUT
   userattr   ASC_Adv:on,off ASC_Antifreeze:off,soft,hard,am,pm ASC_Antifreeze_Pos:5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_AutoAstroModeEvening:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeEveningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_AutoAstroModeMorning:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeMorningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_BlockingTime_afterManual ASC_BlockingTime_beforDayOpen ASC_BlockingTime_beforNightClose ASC_BrightnessSensor ASC_Closed_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_ComfortOpen_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Down:time,astro,brightness,roommate ASC_DriveUpMaxDuration ASC_Drive_Delay ASC_Drive_DelayStart ASC_ExternalTrigger ASC_GuestRoom:on,off ASC_LockOut:soft,hard,off ASC_LockOut_Cmd:inhibit,blocked,protection ASC_Mode_Down:absent,always,off,home ASC_Mode_Up:absent,always,off,home ASC_Open_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Partymode:on,off ASC_Pos_Reading ASC_PrivacyDownValue_beforeNightClose ASC_PrivacyDown_Pos ASC_PrivacyUpValue_beforeDayOpen ASC_PrivacyUp_Pos ASC_RainProtection:on,off ASC_Roommate_Device ASC_Roommate_Reading ASC_Self_Defense_AbsentDelay ASC_Self_Defense_Mode:absent,gone,off ASC_Shading_BetweenTheTime ASC_Shading_InOutAzimuth ASC_Shading_MinMax_Elevation ASC_Shading_Min_OutsideTemperature ASC_Shading_Mode:absent,always,off,home ASC_Shading_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Shading_StateChange_SunnyCloudy ASC_Shading_WaitingPeriod ASC_Shutter_IdleDetection ASC_ShuttersPlace:window,terrace,awning ASC_SlatPosCmd_SlatDevice ASC_Sleep_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_TempSensor ASC_Time_Down_Early ASC_Time_Down_Late ASC_Time_Up_Early ASC_Time_Up_Late ASC_Time_Up_WE_Holiday ASC_Up:time,astro,brightness,roommate ASC_Ventilate_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Ventilate_Window_Open:on,off ASC_WiggleValue ASC_WindParameters ASC_WindProtection:on,off ASC_WindowRec ASC_WindowRec_PosAfterDayClosed:open,lastManual ASC_WindowRec_subType:twostate,threestate Jalousien Jalousien_map structexclude
   webCmd     open:closed:half:stop:pct


und hier das list vom asc

Internals:
   FUUID      5ce2f3da-f33f-fc62-b61a-ac2869baa577e8f8
   FVERSION   73_AutoShuttersControl.pm:v0.10.15-s24586/2021-06-05
   MID        da39a3ee5e6b4b0d3255bfef95601890afd80709
   NAME       ASControl
   NOTIFYDEV  global,ASControl,Bad,Buero_li,Buero_re,Esszimmer,Kueche,Phillip,Schlafzimmer_li,Schlafzimmer_re,Selina,Terrasse,Treppe,Wohnzimmer_li,Wohnzimmer_mi,Wohnzimmer_re,0_userdata.0.Jalousiesteuerung.Fenstertimeout.Terrasse_contact,0_userdata.0.Jalousiesteuerung.Fenstertimeout.Esszimmer_contact,0_userdata.0.Jalousiesteuerung.Fenstertimeout.Schlafzimmer_rechts_contact,Buero_re,0_userdata.0.Jalousiesteuerung.Fenstertimeout.Bad_contact,Bad_contact,0_userdata.0.Jalousiesteuerung.Fenstertimeout.Kueche_contact,zigbee.0.00158d0003216589.contact,zigbee.0.04cf8cdf3c772184.illuminance,Treppe,Esszimmer,0_userdata.0.Jalousiesteuerung.Regnet_es,zigbee.0.00158d000321973c.contact,0_userdata.0.Jalousiesteuerung.Fenstertimeout.Schlafzimmer_links_contact,0_userdata.0.Jalousiesteuerung.Fenstertimeout.Wohnzimmer_links_contact,Buero_li,0_userdata.0.Jalousiesteuerung.Fenstertimeout.Wohnzimmer_mitte_contact,ASC_WindowRec_PosAfterDayClosed,Wohnzimmer_re,zigbee.0.00158d000346ad0c.contact,Regnet_es,0_userdata.0.Jalousiesteuerung.Fenstertimeout.Selina_contact,0_userdata.0.Jalousiesteuerung.Fenstertimeout.Buero_links_contact,zigbee.0.00158d000321800c.contact,Schlafzimmer_li,Kueche,zigbee.0.00158d00045a3466.detected,Schlafzimmer_re,0_userdata.0.Jalousiesteuerung.Fenstertimeout.Buero_rechts_contact,Wohnzimmer_mi,0_userdata.0.Jalousiesteuerung.Fenstertimeout.Phillip_contact,zigbee.0.00158d0003218006.contact,zigbee.0.00158d0003217c7b.contact,Wohnzimmer_li,SZ_li_FK,Regensensor_Water_leak_detected,Regensensor,Phillip,Selina,Astro,Bad,Terrasse,0_userdata.0.Jalousiesteuerung.Fenstertimeout.Wohnzimmer_rechts_contact,zigbee.0.00158d0003217c7a.contact
   NR         21
   NTFY_ORDER 51-ASControl
   STATE      manual
   TYPE       AutoShuttersControl
   VERSION    v0.10.15
   OLDREADINGS:
   READINGS:
     2021-06-15 17:26:41   Bad_PosValue    10
     2020-08-14 20:44:07   Bad_lastDelayPosValue 50
     2021-06-15 16:04:27   Bad_lastPosValue 0
     2021-06-15 05:29:02   Bad_nextAstroTimeEvent 15.06.2021 - 21:33
     2021-06-15 18:23:07   Buero_li_PosValue 100
     2021-06-15 07:00:02   Buero_li_lastPosValue 0
     2021-06-15 07:00:02   Buero_li_nextAstroTimeEvent 15.06.2021 - 21:33
     2021-06-15 18:23:07   Buero_re_PosValue 100
     2021-06-15 07:00:02   Buero_re_lastPosValue 0
     2021-06-15 07:00:02   Buero_re_nextAstroTimeEvent 15.06.2021 - 21:33
     2021-06-15 15:01:09   Esszimmer_PosValue 100
     2020-08-14 20:44:07   Esszimmer_lastDelayPosValue 0
     2021-06-15 14:57:29   Esszimmer_lastPosValue 50
     2021-06-15 07:00:02   Esszimmer_nextAstroTimeEvent 15.06.2021 - 21:33
     2020-08-11 17:00:43   Helligkeit      ventilate - window open
     2021-06-15 19:27:59   Kueche_PosValue 100
     2020-08-14 20:44:07   Kueche_lastDelayPosValue 0
     2021-06-15 19:23:19   Kueche_lastPosValue 100
     2021-06-15 05:29:02   Kueche_nextAstroTimeEvent 15.06.2021 - 21:33
     2021-06-15 16:44:55   Phillip_PosValue 50
     2020-08-14 20:30:02   Phillip_lastDelayPosValue 0
     2021-06-15 16:04:27   Phillip_lastPosValue 50
     2021-06-15 08:00:02   Phillip_nextAstroTimeEvent 15.06.2021 - 21:33
     2021-06-15 19:36:17   Schlafzimmer_li_PosValue 0
     2020-08-14 20:44:07   Schlafzimmer_li_lastDelayPosValue 40
     2021-06-15 15:48:48   Schlafzimmer_li_lastPosValue 10
     2021-06-15 09:00:02   Schlafzimmer_li_nextAstroTimeEvent 15.06.2021 - 21:33
     2021-06-15 19:36:35   Schlafzimmer_re_PosValue 0
     2020-08-14 20:44:07   Schlafzimmer_re_lastDelayPosValue 0
     2021-06-15 19:28:49   Schlafzimmer_re_lastPosValue 10
     2021-06-15 09:00:02   Schlafzimmer_re_nextAstroTimeEvent 15.06.2021 - 21:33
     2021-06-15 14:50:36   Selina_PosValue 100
     2020-08-14 07:30:02   Selina_lastDelayPosValue 100
     2021-06-15 14:47:56   Selina_lastPosValue 50
     2021-06-15 07:30:02   Selina_nextAstroTimeEvent 15.06.2021 - 21:33
     2021-06-15 12:17:58   Terrasse_PosValue 100
     2021-06-12 21:31:31   Terrasse_lastDelayPosValue 90
     2021-06-15 05:29:02   Terrasse_lastPosValue 100
     2021-06-15 05:29:02   Terrasse_nextAstroTimeEvent 15.06.2021 - 21:33
     2021-06-15 19:24:11   Treppe_PosValue 100
     2021-06-15 19:23:19   Treppe_lastPosValue 100
     2021-06-15 05:29:02   Treppe_nextAstroTimeEvent 15.06.2021 - 21:33
     2021-06-15 11:35:56   Wohnzimmer_li_PosValue 100
     2020-08-14 20:44:07   Wohnzimmer_li_lastDelayPosValue 80
     2021-06-15 11:28:48   Wohnzimmer_li_lastPosValue 100
     2021-06-15 05:29:02   Wohnzimmer_li_nextAstroTimeEvent 15.06.2021 - 21:33
     2021-06-15 11:31:15   Wohnzimmer_mi_PosValue 100
     2020-08-14 20:44:07   Wohnzimmer_mi_lastDelayPosValue 0
     2021-06-15 11:28:48   Wohnzimmer_mi_lastPosValue 100
     2021-06-15 05:29:02   Wohnzimmer_mi_nextAstroTimeEvent 15.06.2021 - 21:33
     2021-06-15 11:27:00   Wohnzimmer_re_PosValue 100
     2020-08-14 20:44:07   Wohnzimmer_re_lastDelayPosValue 80
     2021-06-15 10:48:48   Wohnzimmer_re_lastPosValue 80
     2021-06-15 07:00:02   Wohnzimmer_re_nextAstroTimeEvent 15.06.2021 - 21:33
     2020-02-29 11:16:45   ascEnable       on
     2021-06-14 21:15:37   controlShading  on
     2020-02-29 11:16:45   hardLockOut     off
     2021-06-14 21:15:29   room_Jalousien_ioB_OUT Buero_li,Buero_re,Esszimmer,Kueche,Phillip,Schlafzimmer_li,Schlafzimmer_re,Selina,Terrasse,Treppe,Wohnzimmer_li,Wohnzimmer_mi,Wohnzimmer_re
     2021-06-14 21:15:29   room_ioB_OUT_Jalousien Bad
     2020-02-29 11:16:45   selfDefense     off
     2021-06-15 19:36:35   state           manual
     2020-02-29 11:16:45   sunriseTimeWeHoliday off
     2021-06-14 21:15:29   userAttrList    rolled out
   helper:
     shuttersList:
       Bad
       Buero_li
       Buero_re
       Esszimmer
       Kueche
       Phillip
       Schlafzimmer_li
       Schlafzimmer_re
       Selina
       Terrasse
       Treppe
       Wohnzimmer_li
       Wohnzimmer_mi
       Wohnzimmer_re
   monitoredDevs:
     0_userdata.0.Jalousiesteuerung.Fenstertimeout.Bad_contact:
       Bad        ASC_WindowRec
     0_userdata.0.Jalousiesteuerung.Fenstertimeout.Buero_links_contact:
       Buero_li   ASC_WindowRec
     0_userdata.0.Jalousiesteuerung.Fenstertimeout.Buero_rechts_contact:
       Buero_re   ASC_WindowRec
     0_userdata.0.Jalousiesteuerung.Fenstertimeout.Esszimmer_contact:
       Esszimmer  ASC_WindowRec
     0_userdata.0.Jalousiesteuerung.Fenstertimeout.Kueche_contact:
       Kueche     ASC_WindowRec
     0_userdata.0.Jalousiesteuerung.Fenstertimeout.Phillip_contact:
       Phillip    ASC_WindowRec
     0_userdata.0.Jalousiesteuerung.Fenstertimeout.Schlafzimmer_links_contact:
       Schlafzimmer_li ASC_WindowRec
     0_userdata.0.Jalousiesteuerung.Fenstertimeout.Schlafzimmer_rechts_contact:
       Schlafzimmer_re ASC_WindowRec
     0_userdata.0.Jalousiesteuerung.Fenstertimeout.Selina_contact:
       Selina     ASC_WindowRec
     0_userdata.0.Jalousiesteuerung.Fenstertimeout.Terrasse_contact:
       Terrasse   ASC_WindowRec
     0_userdata.0.Jalousiesteuerung.Fenstertimeout.Wohnzimmer_links_contact:
       Wohnzimmer_li ASC_WindowRec
     0_userdata.0.Jalousiesteuerung.Fenstertimeout.Wohnzimmer_mitte_contact:
       Wohnzimmer_mi ASC_WindowRec
     0_userdata.0.Jalousiesteuerung.Fenstertimeout.Wohnzimmer_rechts_contact:
       Wohnzimmer_re ASC_WindowRec
     0_userdata.0.Jalousiesteuerung.Regnet_es:
       ASControl  ASC_rainSensor
     ASC_WindowRec_PosAfterDayClosed:
       Wohnzimmer_mi userattr ASC_Adv:on,off ASC_Antifreeze:off,soft,hard,am,pm ASC_Antifreeze_Pos:5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_AutoAstroModeEvening:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeEveningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_AutoAstroModeMorning:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeMorningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_BlockingTime_afterManual ASC_BlockingTime_beforDayOpen ASC_BlockingTime_beforNightClose ASC_BrightnessSensor ASC_Closed_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_ComfortOpen_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Down:time,astro,brightness,roommate ASC_DriveUpMaxDuration ASC_Drive_Delay ASC_Drive_DelayStart ASC_ExternalTrigger ASC_GuestRoom:on,off ASC_LockOut:soft,hard,off ASC_LockOut_Cmd:inhibit,blocked,protection ASC_Mode_Down:absent,always,off,home ASC_Mode_Up:absent,always,off,home ASC_Open_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Partymode:on,off ASC_Pos_Reading ASC_PrivacyDownValue_beforeNightClose ASC_PrivacyDown_Pos ASC_PrivacyUpValue_beforeDayOpen ASC_PrivacyUp_Pos ASC_RainProtection:on,off ASC_Roommate_Device ASC_Roommate_Reading ASC_Self_Defense_AbsentDelay ASC_Self_Defense_Mode:absent,gone,off ASC_Shading_BetweenTheTime ASC_Shading_InOutAzimuth ASC_Shading_MinMax_Elevation ASC_Shading_Min_OutsideTemperature ASC_Shading_Mode:absent,always,off,home ASC_Shading_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Shading_StateChange_SunnyCloudy ASC_Shading_WaitingPeriod ASC_Shutter_IdleDetection ASC_ShuttersPlace:window,terrace,awning ASC_SlatPosCmd_SlatDevice ASC_Sleep_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_TempSensor ASC_Time_Down_Early ASC_Time_Down_Late ASC_Time_Up_Early ASC_Time_Up_Late ASC_Time_Up_WE_Holiday ASC_Up:time,astro,brightness,roommate ASC_Ventilate_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Ventilate_Window_Open:on,off ASC_WiggleValue ASC_WindParameters ASC_WindProtection:on,off ASC_WindowRec
     Astro:
       ASControl  ASC_twilightDevice
     Bad:
     Bad_contact:
       Bad        ASC_WindowRec
     Buero_li:
     Buero_re:
     Esszimmer:
     Kueche:
     Phillip:
     Regensensor:
       ASControl  ASC_rainSensor
     Regensensor_Water_leak_detected:
       ASControl  ASC_rainSensor
     Regnet_es:
       ASControl  ASC_rainSensor
     SZ_li_FK:
       Schlafzimmer_li ASC_WindowRec
     Schlafzimmer_li:
     Schlafzimmer_re:
     Selina:
     Terrasse:
     Treppe:
     Wohnzimmer_li:
     Wohnzimmer_mi:
     Wohnzimmer_re:
     zigbee.0.00158d0003216589.contact:
       Buero_li   ASC_WindowRec
     zigbee.0.00158d0003217c7a.contact:
       Schlafzimmer_li ASC_WindowRec
     zigbee.0.00158d0003217c7b.contact:
       Schlafzimmer_re ASC_WindowRec
     zigbee.0.00158d0003218006.contact:
       Wohnzimmer_li ASC_WindowRec
     zigbee.0.00158d000321800c.contact:
       Wohnzimmer_mi ASC_WindowRec
     zigbee.0.00158d000321973c.contact:
       Wohnzimmer_re ASC_WindowRec
     zigbee.0.00158d000346ad0c.contact:
       Bad        ASC_WindowRec
     zigbee.0.00158d00045a3466.detected:
       ASControl  ASC_rainSensor
     zigbee.0.04cf8cdf3c772184.illuminance:
       Bad        ASC_BrightnessSensor
       Buero_li   ASC_BrightnessSensor
       Buero_re   ASC_BrightnessSensor
       Esszimmer  ASC_BrightnessSensor
       Kueche     ASC_BrightnessSensor
       Phillip    ASC_BrightnessSensor
       Schlafzimmer_li ASC_BrightnessSensor
       Schlafzimmer_re ASC_BrightnessSensor
       Selina     ASC_BrightnessSensor
       Terrasse   ASC_BrightnessSensor
       Treppe     ASC_BrightnessSensor
       Wohnzimmer_li ASC_BrightnessSensor
       Wohnzimmer_mi ASC_BrightnessSensor
       Wohnzimmer_re ASC_BrightnessSensor
Attributes:
   ASC_autoAstroModeEvening HORIZON
   ASC_autoAstroModeEveningHorizon -2
   ASC_autoAstroModeMorning REAL
   ASC_autoShuttersControlEvening on
   ASC_autoShuttersControlMorning on
   ASC_rainSensor 0_userdata.0.Jalousiesteuerung.Regnet_es:state 1:0 10
   ASC_shuttersDriveDelay 400
   ASC_tempSensor zigbee.0.00158d00045cb455.temperature:state
   ASC_twilightDevice Astro
   alias      ASControl
   devStateIcon { ShuttersControl_DevStateIcon($name) }
   icon       fts_shutter_automatic
   room       Jalousien,ioB_OUT
Base : Intel NUC Debian 9, FHEM aktuell || Zigbee (Coordinator FW Z-Stack 1.2 default Koenkk) || MaxCUL (culfw V 1.67 nanoCUL868) || SIGNALduino 433MHz (V 3.3.2.1-rc8 ) || Shelly s1

CoolTux

Sieht soweit OK aus.
Naja bisschen überlegen bitte. Muss ich einen erfahrenen User wirklich den ganzen Befehl geben.

set ASControl createNewNotifyDev
Für Dein ASC Device
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

D3ltorohd

Zitat von: CoolTux am 15 Juni 2021, 20:49:40
Sieht soweit OK aus.
Naja bisschen überlegen bitte. Muss ich einen erfahrenen User wirklich den ganzen Befehl geben.

set ASControl createNewNotifyDev
Für Dein ASC Device

So erfahren bin ich nicht mit FHEM. Bin froh das es läuft, ewig nichts mehr gemacht, da es ja lief. Dennoch Danke für den ganzen Befehl. Was macht das createNewNotify ?
Base : Intel NUC Debian 9, FHEM aktuell || Zigbee (Coordinator FW Z-Stack 1.2 default Koenkk) || MaxCUL (culfw V 1.67 nanoCUL868) || SIGNALduino 433MHz (V 3.3.2.1-rc8 ) || Shelly s1

Spezialtrick

Zitat von: D3ltorohd am 15 Juni 2021, 21:10:12
So erfahren bin ich nicht mit FHEM. Bin froh das es läuft, ewig nichts mehr gemacht, da es ja lief. Dennoch Danke für den ganzen Befehl. Was macht das createNewNotify ?

Legt die interne Struktur für NOTIFYDEV neu an. (Diese Funktion steht nur zur Verfügung, wenn Attribut ASC_expert auf 1 gesetzt ist.)

https://wiki.fhem.de/wiki/AutoShuttersControl#cite_ref-5
FHEM - Debmatic - Zigbee2MQTT - Homekit

Spezialtrick

Zitat von: CoolTux am 15 Juni 2021, 15:04:21
Fangen wir erstmal mit dem Türsensor an.

Im ASC das Attribut ASC_autoShuttersControlComfort auf on stellen.
Im Rollo Device das Attribut ShuttersPlace auf Terrace stellen

Bezüglich der Delay Geschichte lösche mal das ASC_shuttersDriveDelay im ASC Device und das ASC_Drive_Delay im Rollo Device und setze im Rollo Device ASC_DriveDelayStart. Und zwar immer um enige Sekunden versetzt pro Rollo. Also erstes Rollo mit 0 zweites Rollo mit 2 drittes mit 4 und so weiter.

Zitat von: Spezialtrick am 15 Juni 2021, 17:32:25
Danke für deine Antwort.

Das Attribut ASC_autoShuttersControlComfort war bereits auf on. Ich habe es erneut gesetzt.
Das Attribut ShuttersPlace steht nun auf Terrace.

Das Rollo reagiert leider weiterhin nicht auf das Öffnen der Tür.

Habe ich erledigt.

Brauchst du noch etwas Input von mir?
FHEM - Debmatic - Zigbee2MQTT - Homekit