Autor Thema: ZWAVE: SOF missing (got 00 instead of 01)  (Gelesen 398 mal)

Offline Rampler

  • Sr. Member
  • ****
  • Beiträge: 773
  • Experience is what causes you to make new mistakes
ZWAVE: SOF missing (got 00 instead of 01)
« am: 15 Januar 2021, 09:41:50 »
Hallo zusammen,
habe nun seit ein paar Tagen ZWAVE am Start, bin auch ganz zufrieden. Allerdings stören/wundern mich beim Startup zwei Meldungen:

2021.01.15 09:02:17 1: ZWAVE: SOF missing (got 00 instead of 01)
2021.01.15 09:03:01 2: ZWDongle_ProcessSendStack: no ACK, resending message 0107000301020100f9

2021.01.15 09:02:17 3: Opening ZWAVE device /dev/serial/by-id/usb-0658_0200-if00
2021.01.15 09:02:17 3: Setting ZWAVE serial parameters to 115200,8,N,1
2021.01.15 09:02:17 1: ZWAVE: SOF missing (got 00 instead of 01)
2021.01.15 09:02:18 3: ZWAVE device opened
2021.01.15 09:02:56 0: Featurelevel: 6
2021.01.15 09:02:56 0: Server started with 596 defined entities (fhem.pl:23471/2021-01-04 perl:5.014002 os:linux user:fhem pid:2220)
2021.01.15 09:03:01 2: ZWDongle_ProcessSendStack: no ACK, resending message 0107000301020100f9

Ich verwende den AEONTEC USB Stick GEN5+ (also den Neuen mit dem + am Ende), hier mal ein List:

internals:
   CallbackNr 0
   Clients    :ZWave:
   DEF        /dev/serial/by-id/usb-0658_0200-if00@115200
   DeviceName /dev/serial/by-id/usb-0658_0200-if00@115200
   FD         98
   FUUID      5ffc2fd4-f33f-b6d9-a373-9c04d0ecebe4a58c
   MaxSendRetries 3
   NAME       ZWAVE
   NR         638
   PARTIAL   
   ReadTime   1610697782.77434
   STATE      Initialized
   SendRetries 0
   SendTime   1610697781.92836
   TYPE       ZWDongle
   WaitForAck 0
   homeId     e7c578f9
   nodeIdHex  01
   nrNAck     0
   MatchList:
     1:ZWave    .*
   READINGS:
     2021-01-12 06:47:22   backgroundRSSI  ch1:-82 dBm ch2:-86 dBm
     2021-01-15 09:02:18   caps            Vers:1 Rev:2 ManufID:0086 ProductType:0001 ProductID:005a SERIAL_API_GET_INIT_DATA SERIAL_API_APPL_NODE_INFORMATION APPLICATION_COMMAND_HANDLER ZW_GET_CONTROLLER_CAPABILITIES SERIAL_API_SET_TIMEOUTS SERIAL_API_GET_CAPABILITIES SERIAL_API_SOFT_RESET UNKNOWN_09 UNKNOWN_0a SERIAL_API_SETUP ZW_SET_R_F_RECEIVE_MODE ZW_SET_SLEEP_MODE ZW_SEND_NODE_INFORMATION ZW_SEND_DATA ZW_SEND_DATA_MULTI ZW_GET_VERSION ZW_SEND_DATA_ABORT ZW_R_F_POWER_LEVEL_SET ZW_GET_RANDOM MEMORY_GET_ID MEMORY_GET_BYTE MEMORY_PUT_BYTE MEMORY_GET_BUFFER MEMORY_PUT_BUFFER FLASH_AUTO_PROG_SET ZW_NVR_GET_VALUE NVM_GET_ID NVM_EXT_READ_LONG_BUFFER NVM_EXT_WRITE_LONG_BUFFER NVM_EXT_READ_LONG_BYTE NVM_EXT_WRITE_LONG_BYTE UNKNOWN_2e UNKNOWN_2f ZW_CLEAR_TX_TIMERS ZW_GET_TX_TIMERS CLEAR_NETWORK_STATS GET_NETWORK_STATS GET_BACKGROUND_RSSI UNKNOWN_3c REMOVE_NODEID_FROM_NETWORK ZW_GET_NODE_PROTOCOL_INFO ZW_SET_DEFAULT ZW_REPLICATION_COMMAND_COMPLETE ZW_REPLICATION_SEND_DATA ZW_ASSIGN_RETURN_ROUTE ZW_DELETE_RETURN_ROUTE ZW_REQUEST_NODE_NEIGHBOR_UPDATE ZW_APPLICATION_UPDATE ZW_ADD_NODE_TO_NETWORK ZW_REMOVE_NODE_FROM_NETWORK ZW_CREATE_NEW_PRIMARY ZW_CONTROLLER_CHANGE ZW_ASSIGN_PRIORITY_RETURN_ROUTE ZW_SET_LEARN_MODE ZW_ASSIGN_SUC_RETURN_ROUTE ZW_REQUEST_NETWORK_UPDATE ZW_SET_SUC_NODE_ID ZW_DELETE_SUC_RETURN_ROUTE ZW_GET_SUC_NODE_ID ZW_SEND_SUC_ID ZW_ASSIGN_PRIORITY_SUC_RETURN_ROUTE ZW_EXPLORE_REQUEST_INCLUSION ZW_EXPLORE_REQUEST_EXCLUSION ZW_REQUEST_NODE_INFO ZW_REMOVE_FAILED_NODE_ID ZW_IS_FAILED_NODE ZW_REPLACE_FAILED_NODE UNKNOWN_66 UNKNOWN_67 ZW_FIRMWARE_UPDATE_NVM GET_ROUTING_TABLE_LINE LOCK_ROUTE_RESPONSE ZW_GET_PRIORITY_ROUTE ZW_SET_PRIORITY_ROUTE UNKNOWN_98 APPLICATION_SLAVE_COMMAND_HANDLER ZW_SET_WUT_TIMEOUT ZW_WATCHDOG_ENABLE ZW_WATCHDOG_DISABLE ZW_WATCHDOG_CHECK ZW_SET_EXT_INT_LEVEL ZW_RF_POWERLEVEL_GET ZW_TYPE_LIBRARY ZW_SEND_TEST_FRAME ZW_GET_PROTOCOL_STATUS ZW_SET_PROMISCUOUS_MODE PROMISCUOUS_COMMAND_HANDLER WATCHDOG_START WATCHDOG_STOP ZW_SET_ROUTING_MAX UNKNOWN_ee UNKNOWN_ef
     2021-01-15 09:02:18   ctrlCaps        PRIMARY
     2021-01-15 09:02:18   homeId          HomeId:e7c578f9 CtrlNodeIdHex:01
     2021-01-14 17:25:07   isFailedNode_3  no
     2021-01-14 22:21:49   nodeList        ZWAVE SZ.co
     2021-01-15 09:02:18   random          c4977ba77f5b465adaec81b06924e5c96ef645d0c56cd1074e3124bfcb71f18e
     2021-01-15 09:02:18   state           Initialized
     2021-01-11 22:45:34   statistics      Transmitted:231 BackOffs:0 ReceivedNoErrors:212
                    ChecksumErrors:5 CRC16Errors:4 ForeignHomeId:0
     2021-01-15 09:02:18   sucNodeId       no
     2021-01-12 06:46:58   version         Z-Wave 6.07 STATIC_CONTROLLER
   SendStack:
Attributes:
   devStateIcon Initialized:cul_868@green .*:cul_868@red
   homeId     e7c578f9
   icon       cul_868
   room       FHEM

Funktional ist alles ..

Nachtrag:
Die SOF Meldung kommt nur, wenn ich einen reboot des Raspberry 2 durchführe, bei FHEM Restart sind alles sauber aus...

VG Klaus
« Letzte Änderung: 15 Januar 2021, 09:57:10 von Rampler »
3 HMUART (2 via ESP8266), 1 DUOFERN, 9 ESP8266, RPI (Wheezy), und hoch zufrieden ...
Danke an alle, die was dazu beigetragen haben !!

Offline rudolfkoenig

  • Administrator
  • Hero Member
  • *****
  • Beiträge: 24686
Antw:ZWAVE: SOF missing (got 00 instead of 01)
« Antwort #1 am: 15 Januar 2021, 10:14:52 »
Beide Meldungen sind ein Hinweis auf USB-Kommunikationsprobleme, oder auf einen kaputten/ueberlasteten Firmware.
Dass die Firmware ueberlastet wird, kann auch an dem FHEM-Modul liegen, der zu viel dem Dongle zumutet, obwohl wir Geduld lange geuebt haben.
Wenn es nur um die beiden Meldungen beim Start geht, dann wuerde ich das ignorieren.
Zustimmung Zustimmung x 1 Liste anzeigen