ASC mit horizon ignoriert ASC_Time_Up_Late ASC_Time_Up_early etc.

Klaus Heynen · 03 April 2022, 10:04:41

Mein aSC funktioert so weit ganz gut aber ASC_Time_Up_Late,ASC_Time_Up_Late und ASC_Time_Up_WE/holiday etc. werden ignoriert.
Holiday2we ist auf NW eingestelllt.
Weiß jemand Rat?

CoolTux · 03 April 2022, 10:11:55

Bitte ein list vom ASC Device und einem Beispielrollo

Klaus Heynen · 03 April 2022, 10:31:04

ASC

Internals:
FUUID 5f18a157-f33f-f012-ea72-ae1d8fea713630c7
FVERSION 73_AutoShuttersControl.pm:v0.10.10-s23008/2020-10-23 TESTING
MID da39a3ee5e6b4b0d3255bfef95601890afd80709
NAME Blumenstrasse
NOTIFYDEV global,Blumenstrasse,EG_RKULB,EG_RKURB,EG_RWZLB,EG_RWZRB,EG_RWZTB
NR 64
NTFY_ORDER 51-Blumenstrasse
STATE created new drive timer
TYPE AutoShuttersControl
VERSION v0.10.10
OLDREADINGS:
READINGS:
2022-04-03 07:04:37 EG_RKULB_PosValue 100
2020-12-05 15:17:32 EG_RKULB_Rollo_PosValue 0
2020-12-08 17:27:48 EG_RKULB_Rollo_lastPosValue 0
2022-04-03 07:01:22 EG_RKULB_lastPosValue 100
2022-04-03 07:01:22 EG_RKULB_nextAstroTimeEvent 03.04.2022 - 20:36
2022-04-03 07:04:40 EG_RKURB_PosValue 100
2020-11-25 15:04:21 EG_RKURB_Rollo_PosValue 30
2020-12-08 17:27:48 EG_RKURB_Rollo_lastPosValue 0
2022-04-03 07:01:22 EG_RKURB_lastPosValue 100
2022-04-03 07:01:22 EG_RKURB_nextAstroTimeEvent 03.04.2022 - 20:36
2022-04-03 07:04:06 EG_RWZLB_PosValue 100
2020-12-07 09:49:29 EG_RWZLB_Rollo_PosValue 0
2020-12-08 17:27:48 EG_RWZLB_Rollo_lastPosValue 0
2022-04-03 07:01:22 EG_RWZLB_lastPosValue 100
2022-04-03 07:01:22 EG_RWZLB_nextAstroTimeEvent 03.04.2022 - 20:36
2022-04-03 07:04:36 EG_RWZRB_PosValue 100
2020-08-07 14:24:04 EG_RWZRB_Rollo_PosValue 0
2020-12-08 17:27:48 EG_RWZRB_Rollo_lastPosValue 0
2022-04-03 07:01:22 EG_RWZRB_lastPosValue 100
2022-04-03 07:01:22 EG_RWZRB_nextAstroTimeEvent 03.04.2022 - 20:36
2022-04-03 07:03:12 EG_RWZTB_PosValue 100
2020-11-25 15:07:24 EG_RWZTB_Rollo_PosValue 60
2020-12-08 17:27:48 EG_RWZTB_Rollo_lastPosValue 0
2022-04-03 07:01:22 EG_RWZTB_lastPosValue 100
2022-04-03 07:01:22 EG_RWZTB_nextAstroTimeEvent 03.04.2022 - 20:36
2020-11-25 14:48:23 ascEnable on
2020-11-11 15:46:33 controlShading off
2020-07-22 22:28:07 hardLockOut off
2020-08-07 14:28:10 partyMode off
2020-08-16 12:12:27 rg_ASC_Rolllaeden_Times commands {desired_pct => 'desired_pct:0,10,20,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100',
2021-02-08 07:27:00 rg_ASC_Rolllaeden_Times_lastPosValue 0
2022-03-23 19:18:28 room_Rolladen EG_RKULB,EG_RKURB,EG_RWZLB,EG_RWZRB,EG_RWZTB
2020-07-22 22:28:07 selfDefense off
2022-04-03 09:29:07 state created new drive timer
2020-07-22 22:28:07 sunriseTimeWeHoliday off
2022-03-23 19:18:28 userAttrList rolled out
helper:
shuttersList:
EG_RKULB
EG_RKURB
EG_RWZLB
EG_RWZRB
EG_RWZTB
monitoredDevs:
EG_RKULB:
EG_RKURB:
EG_RWZLB:
EG_RWZRB:
EG_RWZTB:
Attributes:
ASC_autoAstroModeEvening HORIZON
ASC_autoAstroModeEveningHorizon -5
ASC_autoAstroModeMorning HORIZON
ASC_autoAstroModeMorningHorizon -2
ASC_autoShuttersControlEvening on
ASC_autoShuttersControlMorning on
ASC_expert 1
ASC_shuttersDriveDelay 90
devStateIcon { ShuttersControl_DevStateIcon($name) }
icon fts_shutter_automatic
room Rolladen

Rollo:
Internals:
DEF 172.16.14.85
DURATION 0
FUUID 5f19da4b-f33f-f012-1fd5-7a5631c094c351a8
INTERVAL 5
MOVING stopped
NAME EG_RKULB
NR 68
STATE stopped
TARGETPCT 100
TCPIP 172.16.14.85
TYPE Shelly
READINGS:
2020-12-04 18:04:00 ASC_Enable on
2022-04-03 07:04:37 ASC_ShuttersLastDrive day open
2022-04-03 09:29:07 ASC_Time_DriveDown 03.04.2022 - 20:36
2022-04-03 09:29:07 ASC_Time_DriveUp 04.04.2022 - 06:59
2022-03-23 19:18:29 associatedWith Blumenstrasse
2020-12-05 15:16:41 cloud disabled
2022-04-02 07:06:49 energy_0 370
2021-03-13 13:19:24 firmware v1.9.3-rc3(update needed to v1.9.4)
2022-04-03 07:05:03 last_dir up
2022-03-24 07:26:01 network <html>connected to <a href="http://172.16.14.85">172.16.14.85</a></html>
2022-04-03 07:04:37 pct 100
2022-04-03 07:04:37 position open
2022-04-03 07:05:03 power 0
2022-04-02 07:06:49 power_0 0
2022-04-03 07:05:03 state stopped
2020-10-26 13:18:47 stop_reason normal
Attributes:
ASC 2
ASC_Drive_Delay 120
ASC_Drive_DelayStart 90
ASC_Pos_Reading pct
interval 5
mode roller
model shelly2.5
room Rolladen
userattr ASC_Adv:on,off ASC_Antifreeze:off,soft,hard,am,pm ASC_Antifreeze_Pos:5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_AutoAstroModeEvening:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeEveningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_AutoAstroModeMorning:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeMorningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_BlockingTime_afterManual ASC_BlockingTime_beforDayOpen ASC_BlockingTime_beforNightClose ASC_BrightnessSensor ASC_Closed_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_ComfortOpen_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Down:time,astro,brightness,roommate ASC_DriveUpMaxDuration ASC_Drive_Delay ASC_Drive_DelayStart ASC_ExternalTrigger ASC_GuestRoom:on,off ASC_LockOut:soft,hard,off ASC_LockOut_Cmd:inhibit,blocked,protection ASC_Mode_Down:absent,always,off,home ASC_Mode_Up:absent,always,off,home ASC_Open_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Partymode:on,off ASC_Pos_Reading ASC_PrivacyDownValue_beforeNightClose ASC_PrivacyDown_Pos ASC_PrivacyUpValue_beforeDayOpen ASC_PrivacyUp_Pos ASC_RainProtection:on,off ASC_Roommate_Device ASC_Roommate_Reading ASC_Self_Defense_AbsentDelay ASC_Self_Defense_Mode:absent,gone,off ASC_Shading_BetweenTheTime ASC_Shading_InOutAzimuth ASC_Shading_MinMax_Elevation ASC_Shading_Min_OutsideTemperature ASC_Shading_Mode:absent,always,off,home ASC_Shading_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Shading_StateChange_SunnyCloudy ASC_Shading_WaitingPeriod ASC_Shutter_IdleDetection ASC_ShuttersPlace:window,terrace,awning ASC_SlatPosCmd_SlatDevice ASC_Sleep_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_TempSensor ASC_Time_Down_Early ASC_Time_Down_Late ASC_Time_Up_Early ASC_Time_Up_Late ASC_Time_Up_WE_Holiday ASC_Up:time,astro,brightness,roommate ASC_Ventilate_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Ventilate_Window_Open:on,off ASC_WiggleValue ASC_WindParameters ASC_WindProtection:on,off ASC_WindowRec ASC_WindowRec_PosAfterDayClosed:open,lastManual ASC_WindowRec_subType:twostate,threestate
webCmd open:closed:stop

CoolTux · 03 April 2022, 12:14:19

Setze mal bitte das Reading für WE im ASC Device. Also mittels Setter.
Geht bei Dir nur WE nicht oder allgemein früh kein öffnen.

Klaus Heynen · 03 April 2022, 12:42:03

Schonmal vielen Dank, gehen alle nicht.
Wie meinst du das mit dem Setter?
Grüße Klaus

Klaus Heynen · 03 April 2022, 12:47:36

hab es jetzt mit set gesetzt, aber das erklärt nicht wieso es generell nicht geht.

Klaus Heynen · 03 April 2022, 13:04:03

komisch das ASC device sagt Nesxt drive up 4.4. 6:59

Code Auswählen


ASC Configuration and Information Summary
Shutters		Next DriveUp		Next DriveDown		ASC Up		ASC Down		ASC Mode Up		ASC Mode Down		Partymode		Lock-Out		Last Drive		Position		Last Position		Shading Info
EG_RKULB		04.04.2022 - 06:59:07		03.04.2022 - 20:36:35		astro		astro		always		always		off		off		day open		100		0		out - 18:17:39
EG_RKURB		04.04.2022 - 06:59:07		03.04.2022 - 20:36:35		astro		astro		always		always		off		off		day open		100		0		out - 18:17:39
EG_RWZLB		04.04.2022 - 06:59:07		03.04.2022 - 20:36:35		astro		astro		always		always		off		off		day open		100		0		out - 18:17:39
EG_RWZRB		04.04.2022 - 06:59:07		03.04.2022 - 20:36:35		astro		astro		always		always		off		off		day open		100		0		out - 18:17:39
EG_RWZTB		04.04.2022 - 06:59:07		03.04.2022 - 20:36:35		astro		astro		always		always		off		off		day open		100		0		out - 18:17:39

aber das Rollo ddevice:
sagt 5.4. 7:15 (was auch richtig wäere

Code Auswählen


Küche links

50
 EG_RKULB_Rollo 
blocked
 EG_RKULB_Rollo 
version
Internals
FUUID
5f19dd99-f33f-f012-1b0b-6301bfaf2a201a9c
NAME
EG_RKULB_Rollo
NR
71
STATE
half
TYPE
ROLLO
stoptime
1648450277
Readings
ASC_Enable
on
2020-07-23 21:11:29
ASC_ShuttersLastDrive
manual
2020-12-05 15:17:32
ASC_Time_DriveDown
04.03.2022 - 18:45
2022-03-04 12:08:29
ASC_Time_DriveUp
05.03.2022 - 07:15
2022-03-04 12:08:29
associatedWith
Blumenstrasse
2020-12-07 10:17:46
command
half
2022-03-28 08:50:58
desired_pct
50
2022-03-28 08:50:58
drive-type
modul
2022-03-28 08:50:58
last_drive
drive-down
2022-03-28 08:50:58
pct
50
2022-03-28 08:51:17
state
half
2022-03-28 08:51:17

CoolTux · 03 April 2022, 14:03:08

Setze bitte die lists in code tags. So ist das nicht gut lesbar.

Klaus Heynen · 03 April 2022, 14:53:09

so besser?

Klaus Heynen · 03 April 2022, 18:37:18

ich denke ich habe es einkreisen können.
das ASC device wirkt auf direkt die Shelly devices
aber das rg_ASC_Rolllaeden_Times auf die ROLLO devices.
Ich denke wenn ich in der Def .*ROLLO. gegen .*Shelly. austausche dann sollte es gehen.

was meinst du?

Code Auswählen

<Gerät>,<Position>,<Time_Up_Early>,<Time_Up_Late>,<Time_Up_WE/Hol>,<Time_Down_Early>,<Time_Down_Late>,<Mode_Down>,<Mode_Up> 
 (.*Rollo.*):!?ASC_Pos_Reading,!?ASC_Time_Up_Early,!?ASC_Time_Up_Late,!?ASC_Time_Up_WE_Holiday,!?ASC_Time_Down_Early,!?ASC_Time_Down_Late,!?ASC_Mode_Down,!?ASC_Mode_Up

CoolTux · 04 April 2022, 08:56:28

Wieso hast Du sowohl Rollo als auch Shelly bei ASC drin. Entweder oder. Ich nehme an Rollo soll ein Wrapper für die Shellys sein, oder? Lösch mal das ASC komplett, schaue das alle ASC Einträge aus den Shellys und Rollo Devices raus sind und definiere ASC dann neu. Dann nimmst Du nur die Rollo Devices in ASC auf.

Beta-User · 04 April 2022, 09:15:56

Wieso denn so herum, wenn doch so ein Shelly schon einen Rollladen-Modus kann..?

CoolTux · 04 April 2022, 09:30:06

Wie rum ist mir egal. Beides zusammen und verquer macht auf jeden Fall gar kein Sinn. Also entweder oder bitte.