Autor Thema: Meldung bei Änderung der Helligkeit  (Gelesen 521 mal)

Offline Invers

  • Hero Member
  • *****
  • Beiträge: 2124
Meldung bei Änderung der Helligkeit
« am: 23 Oktober 2021, 19:44:40 »
Ich hoffe, ich bin im richtiuen Forum. Falls nicht, bitte ich um einen Hinweis, werde dann verschieben.
Ich habe ein H801  Tasmota geflshed.
Funktioniert auch gut. Angeschlossen ists nur ein weisser LED-Stripe.
Ich kann also nur die Helligkeit ändern, was auch ok wäre.
Aber: Wenn ich das mache (Helligkeit von 50 auf 70), bekomme ich folgende Meldungen:

2021.10.23 19:34:43 1: stacktrace:
2021.10.23 19:34:43 1:     main::__ANON__                      called by FHEM/Color.pm (508)
2021.10.23 19:34:43 1:     Color::devStateIcon                 called by (eval 114275) (1)
2021.10.23 19:34:43 1:     (eval)                              called by ./FHEM/01_FHEMWEB.pm (2976)
2021.10.23 19:34:43 1:     main::FW_dev2image                  called by ./FHEM/01_FHEMWEB.pm (3301)
2021.10.23 19:34:43 1:     main::FW_devState                   called by ./FHEM/01_FHEMWEB.pm (3163)
2021.10.23 19:34:43 1:     main::FW_Notify                     called by fhem.pl (3895)
2021.10.23 19:34:43 1:     main::CallFn                        called by fhem.pl (3812)
2021.10.23 19:34:43 1:     main::DoTrigger                     called by fhem.pl (4910)
2021.10.23 19:34:43 1:     main::readingsEndUpdate             called by fhem.pl (5093)
2021.10.23 19:34:43 1:     main::readingsSingleUpdate          called by ./FHEM/10_MQTT2_DEVICE.pm (424)
2021.10.23 19:34:43 1:     main::MQTT2_DEVICE_Set              called by fhem.pl (3890)
2021.10.23 19:34:43 1:     main::CallFn                        called by fhem.pl (1939)
2021.10.23 19:34:43 1:     main::DoSet                         called by fhem.pl (1971)
2021.10.23 19:34:43 1:     main::CommandSet                    called by fhem.pl (1265)
2021.10.23 19:34:43 1:     main::AnalyzeCommand                called by fhem.pl (1116)
2021.10.23 19:34:43 1:     main::AnalyzeCommandChain           called by ./FHEM/01_FHEMWEB.pm (2779)
2021.10.23 19:34:43 1:     main::FW_fC                         called by ./FHEM/01_FHEMWEB.pm (963)
2021.10.23 19:34:43 1:     main::FW_answerCall                 called by ./FHEM/01_FHEMWEB.pm (598)
2021.10.23 19:34:43 1:     main::FW_Read                       called by fhem.pl (3895)
2021.10.23 19:34:43 1:     main::CallFn                        called by fhem.pl (773)
2021.10.23 19:34:43 1: PERL WARNING: Argument "set" isn't numeric in numeric lt (<) at FHEM/Color.pm line 508.
2021.10.23 19:34:43 1: stacktrace:
2021.10.23 19:34:43 1:     main::__ANON__                      called by FHEM/Color.pm (508)
2021.10.23 19:34:43 1:     Color::devStateIcon                 called by (eval 114276) (1)
2021.10.23 19:34:43 1:     (eval)                              called by ./FHEM/01_FHEMWEB.pm (2976)
2021.10.23 19:34:43 1:     main::FW_dev2image                  called by ./FHEM/01_FHEMWEB.pm (3301)
2021.10.23 19:34:43 1:     main::FW_devState                   called by ./FHEM/01_FHEMWEB.pm (3163)
2021.10.23 19:34:43 1:     main::FW_Notify                     called by fhem.pl (3895)
2021.10.23 19:34:43 1:     main::CallFn                        called by fhem.pl (3812)
2021.10.23 19:34:43 1:     main::DoTrigger                     called by fhem.pl (4910)
2021.10.23 19:34:43 1:     main::readingsEndUpdate             called by fhem.pl (5093)
2021.10.23 19:34:43 1:     main::readingsSingleUpdate          called by ./FHEM/10_MQTT2_DEVICE.pm (424)
2021.10.23 19:34:43 1:     main::MQTT2_DEVICE_Set              called by fhem.pl (3890)
2021.10.23 19:34:43 1:     main::CallFn                        called by fhem.pl (1939)
2021.10.23 19:34:43 1:     main::DoSet                         called by fhem.pl (1971)
2021.10.23 19:34:43 1:     main::CommandSet                    called by fhem.pl (1265)
2021.10.23 19:34:43 1:     main::AnalyzeCommand                called by fhem.pl (1116)
2021.10.23 19:34:43 1:     main::AnalyzeCommandChain           called by ./FHEM/01_FHEMWEB.pm (2779)
2021.10.23 19:34:43 1:     main::FW_fC                         called by ./FHEM/01_FHEMWEB.pm (963)
2021.10.23 19:34:43 1:     main::FW_answerCall                 called by ./FHEM/01_FHEMWEB.pm (598)
2021.10.23 19:34:43 1:     main::FW_Read                       called by fhem.pl (3895)
2021.10.23 19:34:43 1:     main::CallFn                        called by fhem.pl (773)


List:
nternals:
   CID        DVES_E0D793
   DEF        DVES_E0D793
   DEVICETOPIC MQTT2_DVES_E0D793
   FUUID      5e997488-f33f-8098-eb00-ea794e6da3311ee6
   IODev      MQTT2_Server
   LASTInputDev MQTT2_Server
   MQTT2_Server_MSGCNT 39
   MQTT2_Server_TIME 2021-10-23 19:40:11
   MSGCNT     39
   NAME       MQTT2_DVES_E0D793
   NR         370
   STATE      set_on
   TYPE       MQTT2_DEVICE
   JSONMAP:
     Channel_1  0
     Channel_2  0
     Channel_3  0
     Channel_4  white
     Dimmer     pct
     HSBColor   0
     POWER1     0
   READINGS:
     2020-04-17 14:06:37   BASE            18
     2021-10-23 19:40:11   CT              153
     2021-10-23 19:40:11   Channel_5       0
     2021-10-23 19:40:11   Color           000000B300
     2020-04-17 14:06:37   FLAG            15
     2021-10-23 19:40:11   Fade            OFF
     2021-10-23 18:22:24   FallbackTopic   cmnd/DVES_E0D793_fb/
     2020-04-17 14:06:37   GPIO_1          255
     2020-04-17 14:06:37   GPIO_10         255
     2020-04-17 14:06:37   GPIO_11         255
     2020-04-17 14:06:37   GPIO_12         255
     2020-04-17 14:06:37   GPIO_13         255
     2020-04-17 14:06:37   GPIO_2          255
     2020-04-17 14:06:37   GPIO_3          255
     2020-04-17 14:06:37   GPIO_4          255
     2020-04-17 14:06:37   GPIO_5          255
     2020-04-17 14:06:37   GPIO_6          255
     2020-04-17 14:06:37   GPIO_7          255
     2020-04-17 14:06:37   GPIO_8          255
     2020-04-17 14:06:37   GPIO_9          255
     2021-10-23 18:22:24   GroupTopic      cmnd/tasmotas/
     2021-10-23 19:40:11   Heap            28
     2021-10-23 18:22:24   Hostname        tasmota_E0D793-6035
     2021-10-23 09:10:55   IODev           MQTT2_Server
     2021-10-23 18:22:24   IPAddress       192.168.178.52
     2021-10-23 18:43:13   LWT             Online
     2021-10-23 19:40:11   LedTable        ON
     2021-10-23 19:40:11   LoadAvg         38
     2021-10-23 18:22:24   Module          H801
     2021-10-23 19:40:11   MqttCount       2
     2020-04-17 14:06:37   NAME            Generic
     2020-05-01 11:04:55   OtaUrl          http://thehackbox.org/tasmota/release/tasmota.bin
     2021-10-23 19:40:11   POWER           ON
     2021-10-23 18:22:24   RestartReason   External System
     2020-05-01 10:56:26   RestartReason_CallChain_1 40248981
     2020-05-01 10:56:26   RestartReason_CallChain_10 4027df68
     2020-05-01 10:56:26   RestartReason_CallChain_11 4022539d
     2020-05-01 10:56:26   RestartReason_CallChain_12 4027df68
     2020-05-01 10:56:26   RestartReason_CallChain_13 40202cd6
     2020-05-01 10:56:26   RestartReason_CallChain_14 4027de48
     2020-05-01 10:56:26   RestartReason_CallChain_15 4021fc4d
     2020-05-01 10:56:26   RestartReason_CallChain_16 40248a38
     2020-05-01 10:56:26   RestartReason_CallChain_17 40216b64
     2020-05-01 10:56:26   RestartReason_CallChain_18 40000020
     2020-05-01 10:56:26   RestartReason_CallChain_19 40103434
     2020-05-01 10:56:26   RestartReason_CallChain_2 40286cb7
     2020-05-01 10:56:26   RestartReason_CallChain_20 40248a48
     2020-05-01 10:56:26   RestartReason_CallChain_21 40217875
     2020-05-01 10:56:26   RestartReason_CallChain_22 40000000
     2020-05-01 10:56:26   RestartReason_CallChain_23 40220db0
     2020-05-01 10:56:26   RestartReason_CallChain_24 40101830
     2020-05-01 10:56:26   RestartReason_CallChain_25 40101acf
     2020-05-01 10:56:26   RestartReason_CallChain_26 4025351c
     2020-05-01 10:56:26   RestartReason_CallChain_27 4024ebda
     2020-05-01 10:56:26   RestartReason_CallChain_28 40234a3e
     2020-05-01 10:56:26   RestartReason_CallChain_29 40234a96
     2020-05-01 10:56:26   RestartReason_CallChain_3 4022913b
     2020-05-01 10:56:26   RestartReason_CallChain_30 4023b888
     2020-05-01 10:56:26   RestartReason_CallChain_31 4023b9d7
     2020-05-01 10:56:26   RestartReason_CallChain_4 402293ad
     2020-05-01 10:56:26   RestartReason_CallChain_5 4020da3d
     2020-05-01 10:56:26   RestartReason_CallChain_6 4021a4f7
     2020-05-01 10:56:26   RestartReason_CallChain_7 40224dd2
     2020-05-01 10:56:26   RestartReason_CallChain_8 4027df7d
     2020-05-01 10:56:26   RestartReason_CallChain_9 4027de50
     2020-05-01 10:56:26   RestartReason_DEPC 00000000
     2020-05-01 10:56:26   RestartReason_EPC_1 4000dce5
     2020-05-01 10:56:26   RestartReason_EPC_2 00000000
     2020-05-01 10:56:26   RestartReason_EPC_3 40100450
     2020-05-01 10:56:26   RestartReason_EXCVADDR 00000000
     2020-05-01 10:56:26   RestartReason_Exception 0
     2020-05-01 10:56:26   RestartReason_Reason Exception
     2020-04-17 13:54:45   SaveData        on
     2021-10-23 19:40:11   Scheme          0
     2020-04-17 13:54:44   SetOption26     on
     2021-10-23 19:40:11   Sleep           10
     2021-10-23 19:40:11   SleepMode       Dynamic
     2021-10-23 19:40:11   Speed           20
     2020-04-17 13:54:44   StateText1      off
     2020-04-17 13:54:44   StateText2      on
     2020-04-17 13:54:44   StateText3      toggle
     2020-04-17 13:54:44   StateText4      hold
     2021-10-23 19:40:11   Time            2021-10-23T18:40:10
     2020-05-01 11:04:55   Upgrade         Version 8.2.0 from http://thehackbox.org/tasmota/release/tasmota.bin
     2021-10-23 19:40:11   Uptime          0T01:17:54
     2021-10-23 19:40:11   UptimeSec       4674
     2021-10-23 18:22:24   Version         8.2.0(tasmota)
     2020-05-01 10:58:36   Wakeup          Done
     2021-10-23 18:22:24   WebServerMode   Admin
     2021-10-23 19:40:11   White           70
     2021-10-23 19:40:11   Wifi_AP         1
     2021-10-23 19:40:11   Wifi_BSSId      24:65:11:CB:BC:0F
     2021-10-23 19:40:11   Wifi_Channel    13
     2021-10-23 19:40:11   Wifi_Downtime   0T00:00:06
     2021-10-23 19:40:11   Wifi_LinkCount  1
     2021-10-23 19:40:11   Wifi_RSSI       100
     2021-10-23 19:40:11   Wifi_SSId       HachMichHart
     2021-10-23 19:40:11   Wifi_Signal     -32
     2020-05-01 10:54:02   dimup           set
     2020-07-10 15:37:02   mode            set
     2021-10-23 19:40:11   pct             70
     2020-05-01 11:12:37   saturation      0
     2020-07-10 16:21:58   state           set_on
     2021-10-17 19:56:14   subscriptions   cmnd/DVES_E0D793_fb/# cmnd/tasmota_E0D793/# cmnd/tasmotas/#
     2021-10-23 19:40:11   white           70
Attributes:
   IODev      MQTT2_Server
   autocreate 0
   comment    NOTE: For on-for-timer SetExtensions are used. You may add on-for-timer option running on the device. The following is limited to 1h max duration, but will not affect future simple "on" commands:<br>on-for-timer {my $duration = $EVTPART1*10; 'cmnd/cmnd/tasmota_E0D793/Backlog POWER1 1; delay '.$duration.'; POWER1 0'}<br>See the "Praxisbeispiele" in the wiki for "pulseTime1" alternative option and it's restrictions.
   devStateIcon {Color::devStateIcon($name,"rgb","Color","pct","POWER")}
   genericDeviceType light
   icon       light_control
   jsonMap    POWER1:0 Dimmer:pct Channel_4:white Channel_1:0 Channel_2:0 Channel_3:0 HSBColor:0
   model      tasmota_rgbw_led
   readingList tele/tasmota_E0D793/LWT:.* LWT
  tele/tasmota_E0D793/STATE:.* { json2nameValue($EVENT,'',$JSONMAP) }
  tele/tasmota_E0D793/SENSOR:.* { json2nameValue($EVENT,'',$JSONMAP) }
  tele/tasmota_E0D793/INFO.:.* { json2nameValue($EVENT,'',$JSONMAP) }
  tele/tasmota_E0D793/UPTIME:.* { json2nameValue($EVENT,'',$JSONMAP) }
  stat/tasmota_E0D793/RESULT:.* { json2nameValue($EVENT,'',$JSONMAP) }
  stat/tasmota_E0D793/RESULT:.* { $EVENT =~ m,HSBColor...(\d+)\,(\d+)\,(\d+), ? $2 eq ReadingsVal($NAME,"saturation","unknown") ? undef :{"saturation"=>$2} : undef }
  stat/tasmota_E0D793/POWER1:.* state
   room       MQTT2_DEVICE,Wohnung->Wohnzimmer
   setList    off:noArg cmnd/tasmota_E0D793/POWER1 0
  on:noArg cmnd/tasmota_E0D793/POWER1 1
  toggle:noArg cmnd/tasmota_E0D793/POWER1 2
  Color:colorpicker,RGB cmnd/tasmota_E0D793/COLOR
  pct:colorpicker,BRI,0,5,100 cmnd/tasmota_E0D793/DIMMER
  dimup:noArg { my $num=int((ReadingsNum($NAME,'pct',0)+4)/10)*10+10; return qq {cmnd/tasmota_E0D793/Dimmer $num}; }
  dimdown:noArg { my $num=int((ReadingsNum($NAME,'pct',0)+7)/10)*10-10; return qq {cmnd/tasmota_E0D793/Dimmer $num}; }
  white:colorpicker,BRI,0,5,100 { "cmnd/tasmota_E0D793/COLOR ". sprintf("000000%02X",$EVTPART1*2.55) }
  saturation:colorpicker,BRI,0,1,100 cmnd/tasmota_E0D793/HSBCOLOR2
  Speed:colorpicker,BRI,0,1,20 cmnd/tasmota_E0D793/SPEED
  Fade:uzsuSelect,ON,OFF cmnd/tasmota_E0D793/FADE $EVTPART1
  mode:selectnumbers,0,1,4,0,lin cmnd/tasmota_E0D793/SCHEME
   setStateList on off toggle
   webCmd     pct
   webCmdLabel Helligkeit


RAW:
defmod MQTT2_DVES_E0D793 MQTT2_DEVICE DVES_E0D793
attr MQTT2_DVES_E0D793 IODev MQTT2_Server
attr MQTT2_DVES_E0D793 autocreate 0
attr MQTT2_DVES_E0D793 comment NOTE: For on-for-timer SetExtensions are used. You may add on-for-timer option running on the device. The following is limited to 1h max duration, but will not affect future simple "on" commands:<br>on-for-timer {my $duration = $EVTPART1*10;; 'cmnd/cmnd/tasmota_E0D793/Backlog POWER1 1;; delay '.$duration.';; POWER1 0'}<br>See the "Praxisbeispiele" in the wiki for "pulseTime1" alternative option and it's restrictions.
attr MQTT2_DVES_E0D793 devStateIcon {Color::devStateIcon($name,"rgb","Color","pct","POWER")}
attr MQTT2_DVES_E0D793 genericDeviceType light
attr MQTT2_DVES_E0D793 icon light_control
attr MQTT2_DVES_E0D793 jsonMap POWER1:0 Dimmer:pct Channel_4:white Channel_1:0 Channel_2:0 Channel_3:0 HSBColor:0
attr MQTT2_DVES_E0D793 model tasmota_rgbw_led
attr MQTT2_DVES_E0D793 readingList tele/tasmota_E0D793/LWT:.* LWT\
  tele/tasmota_E0D793/STATE:.* { json2nameValue($EVENT,'',$JSONMAP) }\
  tele/tasmota_E0D793/SENSOR:.* { json2nameValue($EVENT,'',$JSONMAP) }\
  tele/tasmota_E0D793/INFO.:.* { json2nameValue($EVENT,'',$JSONMAP) }\
  tele/tasmota_E0D793/UPTIME:.* { json2nameValue($EVENT,'',$JSONMAP) }\
  stat/tasmota_E0D793/RESULT:.* { json2nameValue($EVENT,'',$JSONMAP) }\
  stat/tasmota_E0D793/RESULT:.* { $EVENT =~ m,HSBColor...(\d+)\,(\d+)\,(\d+), ? $2 eq ReadingsVal($NAME,"saturation","unknown") ? undef :{"saturation"=>$2} : undef }\
  stat/tasmota_E0D793/POWER1:.* state
attr MQTT2_DVES_E0D793 room MQTT2_DEVICE,Wohnung->Wohnzimmer
attr MQTT2_DVES_E0D793 setList off:noArg cmnd/tasmota_E0D793/POWER1 0\
  on:noArg cmnd/tasmota_E0D793/POWER1 1\
  toggle:noArg cmnd/tasmota_E0D793/POWER1 2\
  Color:colorpicker,RGB cmnd/tasmota_E0D793/COLOR\
  pct:colorpicker,BRI,0,5,100 cmnd/tasmota_E0D793/DIMMER\
  dimup:noArg { my $num=int((ReadingsNum($NAME,'pct',0)+4)/10)*10+10;; return qq {cmnd/tasmota_E0D793/Dimmer $num};; }\
  dimdown:noArg { my $num=int((ReadingsNum($NAME,'pct',0)+7)/10)*10-10;; return qq {cmnd/tasmota_E0D793/Dimmer $num};; }\
  white:colorpicker,BRI,0,5,100 { "cmnd/tasmota_E0D793/COLOR ". sprintf("000000%02X",$EVTPART1*2.55) }\
  saturation:colorpicker,BRI,0,1,100 cmnd/tasmota_E0D793/HSBCOLOR2\
  Speed:colorpicker,BRI,0,1,20 cmnd/tasmota_E0D793/SPEED\
  Fade:uzsuSelect,ON,OFF cmnd/tasmota_E0D793/FADE $EVTPART1\
  mode:selectnumbers,0,1,4,0,lin cmnd/tasmota_E0D793/SCHEME
attr MQTT2_DVES_E0D793 setStateList on off toggle
attr MQTT2_DVES_E0D793 webCmd pct
attr MQTT2_DVES_E0D793 webCmdLabel Helligkeit

setstate MQTT2_DVES_E0D793 set_on
setstate MQTT2_DVES_E0D793 2020-04-17 14:06:37 BASE 18
setstate MQTT2_DVES_E0D793 2021-10-23 19:40:11 CT 153
setstate MQTT2_DVES_E0D793 2021-10-23 19:40:11 Channel_5 0
setstate MQTT2_DVES_E0D793 2021-10-23 19:40:11 Color 000000B300
setstate MQTT2_DVES_E0D793 2020-04-17 14:06:37 FLAG 15
setstate MQTT2_DVES_E0D793 2021-10-23 19:40:11 Fade OFF
setstate MQTT2_DVES_E0D793 2021-10-23 18:22:24 FallbackTopic cmnd/DVES_E0D793_fb/
setstate MQTT2_DVES_E0D793 2020-04-17 14:06:37 GPIO_1 255
setstate MQTT2_DVES_E0D793 2020-04-17 14:06:37 GPIO_10 255
setstate MQTT2_DVES_E0D793 2020-04-17 14:06:37 GPIO_11 255
setstate MQTT2_DVES_E0D793 2020-04-17 14:06:37 GPIO_12 255
setstate MQTT2_DVES_E0D793 2020-04-17 14:06:37 GPIO_13 255
setstate MQTT2_DVES_E0D793 2020-04-17 14:06:37 GPIO_2 255
setstate MQTT2_DVES_E0D793 2020-04-17 14:06:37 GPIO_3 255
setstate MQTT2_DVES_E0D793 2020-04-17 14:06:37 GPIO_4 255
setstate MQTT2_DVES_E0D793 2020-04-17 14:06:37 GPIO_5 255
setstate MQTT2_DVES_E0D793 2020-04-17 14:06:37 GPIO_6 255
setstate MQTT2_DVES_E0D793 2020-04-17 14:06:37 GPIO_7 255
setstate MQTT2_DVES_E0D793 2020-04-17 14:06:37 GPIO_8 255
setstate MQTT2_DVES_E0D793 2020-04-17 14:06:37 GPIO_9 255
setstate MQTT2_DVES_E0D793 2021-10-23 18:22:24 GroupTopic cmnd/tasmotas/
setstate MQTT2_DVES_E0D793 2021-10-23 19:40:11 Heap 28
setstate MQTT2_DVES_E0D793 2021-10-23 18:22:24 Hostname tasmota_E0D793-6035
setstate MQTT2_DVES_E0D793 2021-10-23 09:10:55 IODev MQTT2_Server
setstate MQTT2_DVES_E0D793 2021-10-23 18:22:24 IPAddress 192.168.178.52
setstate MQTT2_DVES_E0D793 2021-10-23 18:43:13 LWT Online
setstate MQTT2_DVES_E0D793 2021-10-23 19:40:11 LedTable ON
setstate MQTT2_DVES_E0D793 2021-10-23 19:40:11 LoadAvg 38
setstate MQTT2_DVES_E0D793 2021-10-23 18:22:24 Module H801
setstate MQTT2_DVES_E0D793 2021-10-23 19:40:11 MqttCount 2
setstate MQTT2_DVES_E0D793 2020-04-17 14:06:37 NAME Generic
setstate MQTT2_DVES_E0D793 2020-05-01 11:04:55 OtaUrl http://thehackbox.org/tasmota/release/tasmota.bin
setstate MQTT2_DVES_E0D793 2021-10-23 19:40:11 POWER ON
setstate MQTT2_DVES_E0D793 2021-10-23 18:22:24 RestartReason External System
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_1 40248981
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_10 4027df68
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_11 4022539d
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_12 4027df68
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_13 40202cd6
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_14 4027de48
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_15 4021fc4d
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_16 40248a38
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_17 40216b64
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_18 40000020
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_19 40103434
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_2 40286cb7
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_20 40248a48
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_21 40217875
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_22 40000000
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_23 40220db0
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_24 40101830
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_25 40101acf
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_26 4025351c
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_27 4024ebda
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_28 40234a3e
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_29 40234a96
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_3 4022913b
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_30 4023b888
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_31 4023b9d7
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_4 402293ad
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_5 4020da3d
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_6 4021a4f7
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_7 40224dd2
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_8 4027df7d
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_CallChain_9 4027de50
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_DEPC 00000000
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_EPC_1 4000dce5
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_EPC_2 00000000
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_EPC_3 40100450
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_EXCVADDR 00000000
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_Exception 0
setstate MQTT2_DVES_E0D793 2020-05-01 10:56:26 RestartReason_Reason Exception
setstate MQTT2_DVES_E0D793 2020-04-17 13:54:45 SaveData on
setstate MQTT2_DVES_E0D793 2021-10-23 19:40:11 Scheme 0
setstate MQTT2_DVES_E0D793 2020-04-17 13:54:44 SetOption26 on
setstate MQTT2_DVES_E0D793 2021-10-23 19:40:11 Sleep 10
setstate MQTT2_DVES_E0D793 2021-10-23 19:40:11 SleepMode Dynamic
setstate MQTT2_DVES_E0D793 2021-10-23 19:40:11 Speed 20
setstate MQTT2_DVES_E0D793 2020-04-17 13:54:44 StateText1 off
setstate MQTT2_DVES_E0D793 2020-04-17 13:54:44 StateText2 on
setstate MQTT2_DVES_E0D793 2020-04-17 13:54:44 StateText3 toggle
setstate MQTT2_DVES_E0D793 2020-04-17 13:54:44 StateText4 hold
setstate MQTT2_DVES_E0D793 2021-10-23 19:40:11 Time 2021-10-23T18:40:10
setstate MQTT2_DVES_E0D793 2020-05-01 11:04:55 Upgrade Version 8.2.0 from http://thehackbox.org/tasmota/release/tasmota.bin
setstate MQTT2_DVES_E0D793 2021-10-23 19:40:11 Uptime 0T01:17:54
setstate MQTT2_DVES_E0D793 2021-10-23 19:40:11 UptimeSec 4674
setstate MQTT2_DVES_E0D793 2021-10-23 18:22:24 Version 8.2.0(tasmota)
setstate MQTT2_DVES_E0D793 2020-05-01 10:58:36 Wakeup Done
setstate MQTT2_DVES_E0D793 2021-10-23 18:22:24 WebServerMode Admin
setstate MQTT2_DVES_E0D793 2021-10-23 19:40:11 White 70
setstate MQTT2_DVES_E0D793 2021-10-23 19:40:11 Wifi_AP 1
setstate MQTT2_DVES_E0D793 2021-10-23 19:40:11 Wifi_BSSId 24:65:11:CB:BC:0F
setstate MQTT2_DVES_E0D793 2021-10-23 19:40:11 Wifi_Channel 13
setstate MQTT2_DVES_E0D793 2021-10-23 19:40:11 Wifi_Downtime 0T00:00:06
setstate MQTT2_DVES_E0D793 2021-10-23 19:40:11 Wifi_LinkCount 1
setstate MQTT2_DVES_E0D793 2021-10-23 19:40:11 Wifi_RSSI 100
setstate MQTT2_DVES_E0D793 2021-10-23 19:40:11 Wifi_SSId HachMichHart
setstate MQTT2_DVES_E0D793 2021-10-23 19:40:11 Wifi_Signal -32
setstate MQTT2_DVES_E0D793 2020-05-01 10:54:02 dimup set
setstate MQTT2_DVES_E0D793 2020-07-10 15:37:02 mode set
setstate MQTT2_DVES_E0D793 2021-10-23 19:40:11 pct 70
setstate MQTT2_DVES_E0D793 2020-05-01 11:12:37 saturation 0
setstate MQTT2_DVES_E0D793 2020-07-10 16:21:58 state set_on
setstate MQTT2_DVES_E0D793 2021-10-17 19:56:14 subscriptions cmnd/DVES_E0D793_fb/# cmnd/tasmota_E0D793/# cmnd/tasmotas/#
setstate MQTT2_DVES_E0D793 2021-10-23 19:40:11 white 70





Was muss ich denn unternehmen, um das zu beseitigen?
Pi3B Buster | F.-Box 7490 | CUL433 | CUL868 | SDuino + Siro | HM-LAN | 12 x Dect200  | 3 x Heizung FHT + FKont. | KeyMatic + 4 FB | HM Wandtaster 2-fach m. LED | 6 x TKont. TFK-TI | HM-Bew.-Melder aussen + innen | 3 x Smoked. HM-SEC-SD-2

Offline Beta-User

  • Developer
  • Hero Member
  • ****
  • Beiträge: 16243
Antw:Meldung bei Änderung der Helligkeit
« Antwort #1 am: 24 Oktober 2021, 07:09:29 »
Was liefert "version Color.pm"?
Server: HP-T620@Debian 10, aktuelles FHEM + ConfigDB | CUL_HM (VCCU) | MQTT2: MiLight@ESP-GW, BT@OpenMQTTGw | MySensors: seriell, v.a. 2.3.1@RS485 | ZWave | ZigBee@deCONZ | SIGNALduino | MapleCUN | RHASSPY
svn:MySensors, Weekday-&RandomTimer, Twilight,  AttrTemplate {u.a. mqtt2, mysensors, zwave}

Offline Invers

  • Hero Member
  • *****
  • Beiträge: 2124
Antw:Meldung bei Änderung der Helligkeit
« Antwort #2 am: 24 Oktober 2021, 09:14:59 »
File     Rev   Last Change

Color.pm 20813 2019-12-22 18:42:10Z justme1968

HMinfoTools.js             1009 2020-09-03 16:00:00Z frank
doif.js                    24438 2021-05-14 18:08:18Z Ellert
f18.js                     24575 2021-06-03 09:52:42Z rudolfkoenig
fhemweb.js                 25022 2021-09-27 07:11:18Z rudolfkoenig
fhemweb_readingsGroup.js   15189 2017-10-03 17:53:27Z justme1968
Pi3B Buster | F.-Box 7490 | CUL433 | CUL868 | SDuino + Siro | HM-LAN | 12 x Dect200  | 3 x Heizung FHT + FKont. | KeyMatic + 4 FB | HM Wandtaster 2-fach m. LED | 6 x TKont. TFK-TI | HM-Bew.-Melder aussen + innen | 3 x Smoked. HM-SEC-SD-2

Offline Beta-User

  • Developer
  • Hero Member
  • ****
  • Beiträge: 16243
Antw:Meldung bei Änderung der Helligkeit
« Antwort #3 am: 27 Oktober 2021, 15:28:20 »
OK, glaube das Problem gefunden zu haben, komisch, dass das noch keiner gemeldet hat...

Kannst du die Color.pm bitte mal versuchsweise tauschen?
Server: HP-T620@Debian 10, aktuelles FHEM + ConfigDB | CUL_HM (VCCU) | MQTT2: MiLight@ESP-GW, BT@OpenMQTTGw | MySensors: seriell, v.a. 2.3.1@RS485 | ZWave | ZigBee@deCONZ | SIGNALduino | MapleCUN | RHASSPY
svn:MySensors, Weekday-&RandomTimer, Twilight,  AttrTemplate {u.a. mqtt2, mysensors, zwave}

Offline Invers

  • Hero Member
  • *****
  • Beiträge: 2124
Antw:Meldung bei Änderung der Helligkeit
« Antwort #4 am: 27 Oktober 2021, 17:10:13 »
Die Version scheint prima zu laufen. Der Fehler kommt nicht mehr.

Danke für die Hilfe.


Warum das bisher keiner gemeldet hat liegt daran, dass ich ein besonderer Pechvogel bin. LOL
Pi3B Buster | F.-Box 7490 | CUL433 | CUL868 | SDuino + Siro | HM-LAN | 12 x Dect200  | 3 x Heizung FHT + FKont. | KeyMatic + 4 FB | HM Wandtaster 2-fach m. LED | 6 x TKont. TFK-TI | HM-Bew.-Melder aussen + innen | 3 x Smoked. HM-SEC-SD-2

Offline Beta-User

  • Developer
  • Hero Member
  • ****
  • Beiträge: 16243
Antw:Meldung bei Änderung der Helligkeit
« Antwort #5 am: 27 Oktober 2021, 17:15:29 »
...eher, weil du halt hin und wieder ins Log schaust...

Danke für's Testen, ich werd's weitergeben.
Server: HP-T620@Debian 10, aktuelles FHEM + ConfigDB | CUL_HM (VCCU) | MQTT2: MiLight@ESP-GW, BT@OpenMQTTGw | MySensors: seriell, v.a. 2.3.1@RS485 | ZWave | ZigBee@deCONZ | SIGNALduino | MapleCUN | RHASSPY
svn:MySensors, Weekday-&RandomTimer, Twilight,  AttrTemplate {u.a. mqtt2, mysensors, zwave}

Offline Reinhard.M

  • Full Member
  • ***
  • Beiträge: 250
Antw:Meldung bei Änderung der Helligkeit
« Antwort #6 am: 08 November 2021, 21:34:09 »
...eher, weil du halt hin und wieder ins Log schaust...

Danke für's Testen, ich werd's weitergeben.
Stimmt nicht ganz, hatte den gleichen Fehler und war auf der Suche wo ich ihn einkippen kann :)
Mit deiner angepassten Version ist bei mir ebenfalls der Fehler behoben, besten Dank.

Gruß Reinhard

 

decade-submarginal