Autor Thema: Invalid command/argument 81990626 beim Anlernen  (Gelesen 888 mal)

Offline Alpha_DE

  • New Member
  • *
  • Beiträge: 6
Invalid command/argument 81990626 beim Anlernen
« am: 05 November 2021, 08:51:57 »
Hallo!

Ich bin gerade vom MAX Cube auf einen 433/866 USB CUL Stick umgestiegen (Doppel-CUL-868-433-USB Stick für FHEM 1x 868MHz + 1x 433MHz CC1101).

Ich habe, entlang der Anleitungen, alle meine MAX Devices per Hardware-Reset zurückgesetzt und neu angelernt. Das hat auch in fast allen Fällen geklappt, nur bei einem Heizkörperthermostat geht es nicht richtig, beim Anlernen bleibt der in "state: waiting for data" und "error: Invalid command/argument 81990626".

Daran haben auch wiederholte Hard-Resets (Batterie entnehmen, drei Tasten drücken, Neustart, rES, Inst,AdA, Pairing) nichts geändert.

Anbei das Verbose 5 Log.

2021.11.05 08:43:51 5: CulMax, IODev MapleCUL_1_433, len 23, msgcnt 00, msgflag 04, msgType PairPing, src 067de7, dst 000000, group 0, payload 1601FF4A484130303036303530, rssi -79.5
2021.11.05 08:43:51 4: CulMax, PairPing (dst 000000, pairmode 1), firmware 22, type HeatingThermostat, testresult 255, serial JHA0006050
2021.11.05 08:43:51 3: CulMax, Pairing device MAX_067de7 of type HeatingThermostat with serial JHA0006050
2021.11.05 08:43:51 5: CulMax: dispatch MAX,0,define,067de7,HeatingThermostat,JHA0006050,0
2021.11.05 08:43:51 5: MAX_Parse, MAX,0,define,067de7,HeatingThermostat,JHA0006050,0
2021.11.05 08:43:51 3: MAX_PARSE, got message define for undefined device 067de7 type HeatingThermostat , autocreate is enabled
2021.11.05 08:43:51 2: autocreate: define MAX_067de7 MAX HeatingThermostat 067de7
2021.11.05 08:43:51 2: autocreate: define FileLog_MAX_067de7 FileLog ./log/MAX_067de7-%Y.log MAX_067de7
2021.11.05 08:43:51 4: CulMax, send -> cmd:PairPong, msgcnt:01, flags:00, Cmd2id:01, src:MAX_123456 , dst:MAX_067de7 , gid:00 , payload:00 , cul:none
2021.11.05 08:43:51 5: CulMax, send packet: 0b010001123456067de70000
2021.11.05 08:43:51 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:43:52 5: CulMax, Send Queue MapleCUL_1_433 -> needPreamble: 1, necessaryCredit: 110, credit10ms: 3077, MapleCUL_1_433 CMD_LAST_H: 0
2021.11.05 08:43:52 4: CulMax, Send Queue packet send : Zs0b010001123456067de70000 to MAX_067de7 with MapleCUL_1_433
2021.11.05 08:43:52 5: CulMax: dispatch MAX,0,HeatingThermostatConfig,067de7,17,21,30.5,4.5,444855084520452045204520452045204520452045204520452044485508452045204520452045204520452045204520452045204448546c44cc55144520452045204520452045204520452045204448546c44cc55144520452045204520452045204520452045204448546c44cc55144520452045204520452045204520452045204448546c44cc55144520452045204520452045204520452045204448546c44cc5514452045204520452045204520452045204520,80,5,0,12,15,100,0,0,12
2021.11.05 08:43:52 5: MAX_Parse, MAX,0,HeatingThermostatConfig,067de7,17,21,30.5,4.5,444855084520452045204520452045204520452045204520452044485508452045204520452045204520452045204520452045204448546c44cc55144520452045204520452045204520452045204448546c44cc55144520452045204520452045204520452045204448546c44cc55144520452045204520452045204520452045204448546c44cc55144520452045204520452045204520452045204448546c44cc5514452045204520452045204520452045204520,80,5,0,12,15,100,0,0,12
2021.11.05 08:43:52 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:43:53 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:43:53 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:43:54 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:43:54 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:43:55 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:43:55 4: CulMax, Send Queue retry MAX_067de7 for PairPong count: 3
2021.11.05 08:43:58 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:43:58 5: CulMax, Send Queue MapleCUL_1_433 -> needPreamble: 1, necessaryCredit: 110, credit10ms: 2974, MapleCUL_1_433 CMD_LAST_H: 0
2021.11.05 08:43:58 4: CulMax, Send Queue packet send : Zs0b010001123456067de70000 to MAX_067de7 with MapleCUL_1_433
2021.11.05 08:43:59 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:43:59 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:44:00 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:44:00 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:44:01 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:44:01 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:44:01 4: CulMax, Send Queue retry MAX_067de7 for PairPong count: 2
2021.11.05 08:44:04 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:44:05 5: CulMax, Send Queue MapleCUL_1_433 -> needPreamble: 1, necessaryCredit: 110, credit10ms: 2871, MapleCUL_1_433 CMD_LAST_H: 0
2021.11.05 08:44:05 4: CulMax, Send Queue packet send : Zs0b010001123456067de70000 to MAX_067de7 with MapleCUL_1_433
2021.11.05 08:44:05 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:44:06 5: CulMax, IODev MapleCUL_1_433, len 14, msgcnt 01, msgflag 02, msgType Ack, src 067de7, dst 123456, group 0, payload 81990626, rssi -78
2021.11.05 08:44:06 4: CulMax, NACK from MAX_067de7 for cmd PairPong !
2021.11.05 08:44:06 5: CulMax: dispatch MAX,1,Ack,067de7,81990626
2021.11.05 08:44:06 5: MAX_Parse, MAX,1,Ack,067de7,81990626
2021.11.05 08:44:06 1: MAX_Parse, device MAX_067de7 answered with: Invalid command/argument 81990626
2021.11.05 08:44:06 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:44:06 4: CulMax, Send Queue NACK from MAX_067de7 for PairPong, removing from queue
2021.11.05 08:44:06 5: CulMax, Send Queue is now empty

Ich sehe auch bei verschiedenen Thermostaten ein

2021.11.05 08:16:13 4: CulMax, send -> cmd:AddLinkPartner, msgcnt:07, flags:00, Cmd2id:20, src:MAX_123456 , dst:BadezimmerHeizung , gid:00 , payload:00f22e04 , cul:none
2021.11.05 08:16:13 5: CulMax, send packet: 0e07002012345600df230000f22e04
2021.11.05 08:16:13 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:16:13 5: CulMax, Send Queue MapleCUL_1_433 -> needPreamble: 1, necessaryCredit: 112, credit10ms: 1868, MapleCUL_1_433 CMD_LAST_H: 0
2021.11.05 08:16:13 4: CulMax, Send Queue packet send : Zs0e07002012345600df230000f22e04 to BadezimmerHeizung with MapleCUL_1_433
2021.11.05 08:16:14 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:16:14 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:16:15 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:16:15 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:16:16 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:16:16 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:16:16 4: CulMax, Send Queue retry BadezimmerHeizung for AddLinkPartner count: 3
2021.11.05 08:16:19 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:16:19 5: CulMax, Send Queue MapleCUL_1_433 -> needPreamble: 1, necessaryCredit: 112, credit10ms: 1762, MapleCUL_1_433 CMD_LAST_H: 0
2021.11.05 08:16:19 4: CulMax, Send Queue packet send : Zs0e07002012345600df230000f22e04 to BadezimmerHeizung with MapleCUL_1_433
2021.11.05 08:16:20 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:16:21 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:16:21 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:16:22 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:16:22 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:16:23 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:16:23 4: CulMax, Send Queue retry BadezimmerHeizung for AddLinkPartner count: 2
2021.11.05 08:16:26 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:16:26 5: CulMax, Send Queue MapleCUL_1_433 -> needPreamble: 1, necessaryCredit: 112, credit10ms: 1656, MapleCUL_1_433 CMD_LAST_H: 0
2021.11.05 08:16:26 4: CulMax, Send Queue packet send : Zs0e07002012345600df230000f22e04 to BadezimmerHeizung with MapleCUL_1_433
2021.11.05 08:16:27 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:16:27 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:16:28 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:16:28 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:16:29 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:16:29 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:16:29 4: CulMax, Send Queue retry BadezimmerHeizung for AddLinkPartner count: 1
2021.11.05 08:16:32 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:16:32 5: CulMax, Send Queue MapleCUL_1_433 -> needPreamble: 1, necessaryCredit: 112, credit10ms: 1550, MapleCUL_1_433 CMD_LAST_H: 0
2021.11.05 08:16:32 4: CulMax, Send Queue packet send : Zs0e07002012345600df230000f22e04 to BadezimmerHeizung with MapleCUL_1_433
2021.11.05 08:16:33 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:16:34 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:16:34 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:16:35 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:16:35 5: CulMax, Send Queue 1 packet in queue
2021.11.05 08:16:35 3: CulMax, Send Queue missing ack from BadezimmerHeizung for AddLinkPartner, removing from queue
2021.11.05 08:16:35 5: CulMax, Send Queue is now empty

Hat jemand einen Tip für mich, wie man das lösen kann?

System ist aktuell (Raspberry Pi 4B, FHEM auf aktuellem Stand und restarted)

und hier mal das Pairing mit der Beta von Cul_Max:

2021.11.05 08:53:17 5: CulMax, BroadcastTime payload : 150508b5d1
2021.11.05 08:53:17 4: CulMax, new timeslot 0 for device MAX_067de7
2021.11.05 08:53:17 4: CulMax, new timeslot 1 for device KuecheHeizung
2021.11.05 08:53:17 4: CulMax, new timeslot 2 for device FlurHeizung
2021.11.05 08:53:17 4: CulMax, new timeslot 3 for device WohnzimmerHeizungTuer
2021.11.05 08:53:17 4: CulMax, new timeslot 4 for device BadezimmerHeizung
2021.11.05 08:53:17 4: CulMax, new timeslot 5 for device WohnzimmerHeizungFenster
2021.11.05 08:53:17 4: CulMax, new timeslot 6 for device BueroHeizung
2021.11.05 08:54:25 5: CulMax, IODev MapleCUL_1_433, len 15, msgcnt 00, msgflag 04, msgType ThermostatState, src 067d90, dst 000000, group 0, payload 19042A00E0, rssi -53.5
2021.11.05 08:54:25 5: CulMax: dispatch MAX,0,ThermostatState,067d90,19042A00E0
2021.11.05 08:54:25 5: MAX_Parse, MAX,0,ThermostatState,067d90,19042A00E0
2021.11.05 09:04:46 5: CulMax, IODev MapleCUL_1_433, len 15, msgcnt 00, msgflag 04, msgType ThermostatState, src 067a2d, dst 000000, group 0, payload 19022A00E1, rssi -61.5
2021.11.05 09:04:46 5: CulMax: dispatch MAX,0,ThermostatState,067a2d,19022A00E1
2021.11.05 09:04:46 5: MAX_Parse, MAX,0,ThermostatState,067a2d,19022A00E1
2021.11.05 09:05:33 1: Server shutdown delayed due to alexa for max 10 sec
2021.11.05 09:05:35 0: Server shutdown
2021.11.05 09:05:36 1: Including fhem.cfg
2021.11.05 09:05:37 2: eventTypes: loaded 10140 lines from ./log/eventTypes.txt
2021.11.05 09:05:41 2: Switched MapleCUL_1_433 rfmode to MAX
2021.11.05 09:05:41 1: Including ./log/fhem.save
2021.11.05 09:05:41 1: Messages collected while initializing FHEM:SecurityCheck:
  mqttBroker is not password protected

Protect this FHEM installation by configuring the allowed device allowed
You can disable this message with attr global motd none

2021.11.05 09:05:42 5: CulMax, Notify global , INITIALIZED
2021.11.05 09:05:48 2: alexa: starting alexa-fhem: /usr/local/bin/alexa-fhem -c ./alexa-fhem.cfg -a xx:xx
2021.11.05 09:05:50 0: Featurelevel: 6
2021.11.05 09:05:50 0: Server started with 251 defined entities (fhem.pl:25161/2021-10-30 perl:5.028001 os:linux user:fhem pid:11346)
2021.11.05 09:05:51 5: CulMax, BroadcastTime payload : 15050985f3
2021.11.05 09:05:51 5: CulMax, Broadcast time to 000000
2021.11.05 09:05:51 4: CulMax, send -> cmd:Timeformation, msgcnt:01, flags:04, Cmd2id:03, src:MAX_123456, dst:Broadcast, gid:00, payload:15050985f3, cul:none
2021.11.05 09:05:51 5: CulMax, packet to SQH : 0f0104031234560000000015050985f3
2021.11.05 09:05:51 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:05:51 5: CulMax, Send Queue MapleCUL_1_433 -> needPreamble: 1, necessaryCredit: 113, credit10ms: MapleCUL_1_433 = 2601, CMD_LAST_H: 0
2021.11.05 09:05:51 5: CulMax, Send Queue updating packet Timeformation payload
2021.11.05 09:05:51 4: CulMax, Send Queue packet send : Zs0f0104031234560000000015050985f3 to Broadcast with MapleCUL_1_433
2021.11.05 09:05:51 5: CulMax, Send Queue is now empty
2021.11.05 09:05:57 2: HueAlfter: http request failed: http://192.168.5.169/api/Cq19H-eUbgJ1PDPYWc52aBoTSlyYvkjNfSJToh3E: empty answer received
2021.11.05 09:06:00 4: parse status message for WohnzimmerHueLicht
2021.11.05 09:06:04 2: AttrTemplates: got 230 entries
2021.11.05 09:06:06 1: PERL WARNING: Use of uninitialized value in multiplication (*) at FHEM/OpenWeatherMapAPI.pm line 445.
2021.11.05 09:06:15 4: CulMax, send -> cmd:SetTemperature, msgcnt:02, flags:00, Cmd2id:40, src:MAX_123456, dst:MAX_067de7, gid:00, payload:66, cul:none
2021.11.05 09:06:15 5: CulMax, packet to SQH : 0b020040123456067de70066
2021.11.05 09:06:15 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:16 5: CulMax, Send Queue MapleCUL_1_433 -> needPreamble: 1, necessaryCredit: 110, credit10ms: MapleCUL_1_433 = 2514, CMD_LAST_H: 0
2021.11.05 09:06:16 4: CulMax, Send Queue packet send : Zs0b020040123456067de70066 to MAX_067de7 with MapleCUL_1_433
2021.11.05 09:06:16 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:17 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:18 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:18 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:19 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:19 4: CulMax, Send Queue retry MAX_067de7 for SetTemperature count: 3
2021.11.05 09:06:22 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:22 5: CulMax, Send Queue MapleCUL_1_433 -> needPreamble: 1, necessaryCredit: 110, credit10ms: MapleCUL_1_433 = 2411, CMD_LAST_H: 0
2021.11.05 09:06:22 4: CulMax, Send Queue packet send : Zs0b020040123456067de70066 to MAX_067de7 with MapleCUL_1_433
2021.11.05 09:06:22 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:23 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:23 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:24 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:24 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:25 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:25 4: CulMax, C: 00, F: 04, T: 60, S: 067D90 D: 000000 G: 00 P: 19052A00DE
2021.11.05 09:06:25 4: CulMax, IODev MapleCUL_1_433, flags 04, msgcnt 00, msgType ThermostatState, src 067d90 HeatingThermostat, dst 000000 Broadcast, group 0, payload 19052A00DE, rssi -54
2021.11.05 09:06:25 5: CulMax: dispatch MAX,0,ThermostatState,067d90,19052A00DE
2021.11.05 09:06:25 5: MAX_Parse, MAX,0,ThermostatState,067d90,19052A00DE
2021.11.05 09:06:26 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:26 4: CulMax, Send Queue retry MAX_067de7 for SetTemperature count: 2
2021.11.05 09:06:29 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:29 5: CulMax, Send Queue MapleCUL_1_433 -> needPreamble: 1, necessaryCredit: 110, credit10ms: MapleCUL_1_433 = 2308, CMD_LAST_H: 0
2021.11.05 09:06:29 4: CulMax, Send Queue packet send : Zs0b020040123456067de70066 to MAX_067de7 with MapleCUL_1_433
2021.11.05 09:06:29 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:30 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:30 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:31 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:31 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:32 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:32 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:32 4: CulMax, Send Queue retry MAX_067de7 for SetTemperature count: 1
2021.11.05 09:06:36 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:36 5: CulMax, Send Queue MapleCUL_1_433 -> needPreamble: 1, necessaryCredit: 110, credit10ms: MapleCUL_1_433 = 2205, CMD_LAST_H: 0
2021.11.05 09:06:36 4: CulMax, Send Queue packet send : Zs0b020040123456067de70066 to MAX_067de7 with MapleCUL_1_433
2021.11.05 09:06:36 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:37 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:37 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:38 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:38 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:39 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:39 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:39 2: CulMax, Send Queue missing ack from MAX_067de7 for SetTemperature, removing from queue
2021.11.05 09:06:39 5: CulMax, Send Queue is now empty
2021.11.05 09:06:55 4: CulMax, C: 00, F: 04, T: 00, S: 067DE7 D: 123456 G: 00 P: 1601FF4A484130303036303530
2021.11.05 09:06:55 4: CulMax, IODev MapleCUL_1_433, flags 04, msgcnt 00, msgType PairPing, src 067de7 HeatingThermostat, dst 123456 CUL_MAX, group 0, payload 1601FF4A484130303036303530, rssi -80
2021.11.05 09:06:55 4: CulMax, PairPing (src 067de7, dst 123456, pairmode 1), firmware 22, type HeatingThermostat, testresult 255, serial JHA0006050
2021.11.05 09:06:55 3: CulMax, Re-Pairing device MAX_067de7 of type HeatingThermostat with serial JHA0006050
2021.11.05 09:06:55 5: CulMax: dispatch MAX,1,define,067de7,HeatingThermostat,JHA0006050,0
2021.11.05 09:06:55 5: MAX_Parse, MAX,1,define,067de7,HeatingThermostat,JHA0006050,0
2021.11.05 09:06:56 4: CulMax, send -> cmd:PairPong, msgcnt:03, flags:00, Cmd2id:01, src:MAX_123456, dst:MAX_067de7, gid:00, payload:00, cul:none
2021.11.05 09:06:56 5: CulMax, packet to SQH : 0b030001123456067de70000
2021.11.05 09:06:56 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:56 5: CulMax, Send Queue MapleCUL_1_433 -> needPreamble: 1, necessaryCredit: 110, credit10ms: MapleCUL_1_433 = 2116, CMD_LAST_H: 0
2021.11.05 09:06:56 4: CulMax, Send Queue packet send : Zs0b030001123456067de70000 to MAX_067de7 with MapleCUL_1_433
2021.11.05 09:06:56 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:57 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:57 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:58 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:58 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:59 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:59 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:06:59 4: CulMax, Send Queue retry MAX_067de7 for PairPong count: 3
2021.11.05 09:07:02 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:07:02 5: CulMax, Send Queue MapleCUL_1_433 -> needPreamble: 1, necessaryCredit: 110, credit10ms: MapleCUL_1_433 = 2013, CMD_LAST_H: 0
2021.11.05 09:07:02 4: CulMax, Send Queue packet send : Zs0b030001123456067de70000 to MAX_067de7 with MapleCUL_1_433
2021.11.05 09:07:03 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:07:03 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:07:03 4: CulMax, C: 03, F: 02, T: 02, S: 067DE7 D: 123456 G: 00 P: 81990026
2021.11.05 09:07:03 4: CulMax, IODev MapleCUL_1_433, flags 02, msgcnt 03, msgType Ack, src 067de7 HeatingThermostat, dst 123456 CUL_MAX, group 0, payload 81990026, rssi -80
2021.11.05 09:07:03 3: CulMax, NACK from [067de7] HeatingThermostat MAX_067de7 for cmd PairPong !
2021.11.05 09:07:03 5: CulMax: dispatch MAX,1,Ack,067de7,81990026
2021.11.05 09:07:03 5: MAX_Parse, MAX,1,Ack,067de7,81990026
2021.11.05 09:07:04 5: CulMax, Send Queue : 1 packet are in the queue
2021.11.05 09:07:04 4: CulMax, Send Queue NACK from MAX_067de7 for PairPong, removing from queue
2021.11.05 09:07:04 5: CulMax, Send Queue is now empty
2021.11.05 09:07:14 5: CulMax, Notify global , RENAMED MAX_067de7 SchlafzimmerHeizung
2021.11.05 09:07:14 2: autocreate: renamed FileLog_MAX_067de7 to FileLog_SchlafzimmerHeizung
2021.11.05 09:07:14 1: ./log/SchlafzimmerHeizung-2021.log or ./log/SchlafzimmerHeizung-2021.log:
2021.11.05 09:07:16 5: CulMax, Notify global , SAVE
« Letzte Änderung: 05 November 2021, 09:09:16 von Alpha_DE »

Offline Wzut

  • Moderator
  • Hero Member
  • ***
  • Beiträge: 4570
Antw:Invalid command/argument 81990626 beim Anlernen
« Antwort #1 am: 11 November 2021, 12:54:15 »
payload:00f22e04 , cul:none
du solltest schon sicher stellen das dein CM Device auch den "richtigen" CUL Teil deines Tandems benutzt !
Wenn das Pair-Pong  über den "falschen" sprich 433 MHz Part raus geht wird es nie eine Antwort geben.
Schade auch das du den harten Weg gegangen bist und alle Geräte reseten musstest, mit der alten MAXID wäre es ein Kinderspiel gewesen !
Maintainer der Module: MAX, MPD, UbiquitiMP, UbiquitiOut, SIP, BEOK, readingsWatcher