Cyrus Vision ZP3111 4in1 PIR: Reading basicSet fehlt

wibi_ · 07 Dezember 2021, 13:23:51

Hallo zusammen,

ich habe mir vor einiger Zeit 3 solche ZP3111 PIR angeschafft und wollte diese nun in Betrieb nehmen. Allerdings bekomme ich bei keinem dieser Geräte das für mich interessante Reading basicSet, das die Bewegungserkennung anzeigen soll, bei der Installation - get configAll - geliefert. FHEM habe ich vorgestern erst aktualisiert.
Als ZWave-Dongle habe ich einen ZMEEUZB, der mit anderen Devices bestens funktioniert.
Ich habe bereits mehrfach versucht neu zu inkliudieren, bekomme es aber einfach nicht hin. Vielleicht kann mir ja jemand einen "Schubs" geben.

Hier noch die Events bei der Installation:

Code Auswählen

2021-12-07 12:21:16.649 Global global UNDEFINED ZWave_SENSOR_NOTIFICATION_35 ZWave ea8ad7de 35 5e86725a85597380713170847a98
2021-12-07 12:21:16.649 Global global DEFINED ZWave_SENSOR_NOTIFICATION_35
2021-12-07 12:21:16.649 Global global DEFINED FileLog_ZWave_SENSOR_NOTIFICATION_35
2021-12-07 12:21:19.648 ZWave ZWave_SENSOR_NOTIFICATION_35 modelId: 0109-2021-2101
2021-12-07 12:21:19.648 ZWave ZWave_SENSOR_NOTIFICATION_35 modelConfig: vision/zp3111.xml
2021-12-07 12:21:19.648 ZWave ZWave_SENSOR_NOTIFICATION_35 model: Vision Security ZP3111 Multisensor 4in1
2021-12-07 12:21:22.270 ZWave ZWave_SENSOR_NOTIFICATION_35 zwavePlusInfo:  version:01 role:SleepingReportingSlave node:Z-Wave+Node installerIcon:0c07 userIcon:0c07
2021-12-07 12:22:47.982 ZWave ZWave_SENSOR_NOTIFICATION_35 CMD: ZW_APPLICATION_UPDATE
2021-12-07 12:22:48.018 ZWave ZWave_SENSOR_NOTIFICATION_35 configHumidityReportingThreshold: 10
2021-12-07 12:22:48.055 ZWave ZWave_SENSOR_NOTIFICATION_35 configLEDMode: 3
2021-12-07 12:22:48.093 ZWave ZWave_SENSOR_NOTIFICATION_35 configLuminanceReportingThreshold: 10
2021-12-07 12:22:48.128 ZWave ZWave_SENSOR_NOTIFICATION_35 configMotionSensorReTriggerDuration: 3
2021-12-07 12:22:48.165 ZWave ZWave_SENSOR_NOTIFICATION_35 configMotionSensorSensitivity6: 4
2021-12-07 12:22:48.203 ZWave ZWave_SENSOR_NOTIFICATION_35 configTemperatureReportingThreshold: 10
2021-12-07 12:22:48.239 ZWave ZWave_SENSOR_NOTIFICATION_35 configTemperatureUnit: Celsius
2021-12-07 12:22:49.606 ZWave ZWave_SENSOR_NOTIFICATION_35 alarm: HomeSecurity: Event cleared: Tampering - product covering removed, arg 10300
2021-12-07 12:23:18.989 ZWave ZWave_SENSOR_NOTIFICATION_35 CMD: ZW_APPLICATION_UPDATE
2021-12-07 12:23:19.027 ZWave ZWave_SENSOR_NOTIFICATION_35 assocGroups: 1
2021-12-07 12:23:19.065 ZWave ZWave_SENSOR_NOTIFICATION_35 assocGroup_1: Max 5 Nodes ZME_UZB1
2021-12-07 12:23:20.703 ZWave ZWave_SENSOR_NOTIFICATION_35 alarm: HomeSecurity: Event cleared: Tampering - product covering removed, arg 10300
2021-12-07 12:25:12.452 ZWave ZWave_SENSOR_NOTIFICATION_35 alarm: HomeSecurity: Event cleared: Tampering - product covering removed, arg 10300
2021-12-07 12:25:54.855 ZWave ZWave_SENSOR_NOTIFICATION_35 CMD: ZW_APPLICATION_UPDATE
2021-12-07 12:25:54.895 ZWave ZWave_SENSOR_NOTIFICATION_35 assocGroupCmdList_1: BATTERY:03 ALARM:05 DEVICE_RESET_LOCALLY:01 SENSOR_MULTILEVEL:05 BASIC:01 
2021-12-07 12:25:54.927 ZWave ZWave_SENSOR_NOTIFICATION_35 assocGroupCmdList_1: BATTERY:03 ALARM:05 DEVICE_RESET_LOCALLY:01 SENSOR_MULTILEVEL:05 BASIC:01 
2021-12-07 12:25:56.533 ZWave ZWave_SENSOR_NOTIFICATION_35 alarm: HomeSecurity: Event cleared: Tampering - product covering removed, arg 10300
2021-12-07 12:35:47.753 ZWave ZWave_SENSOR_NOTIFICATION_35 CMD: ZW_APPLICATION_UPDATE
2021-12-07 12:35:49.253 ZWave ZWave_SENSOR_NOTIFICATION_35 alarm: HomeSecurity: Event cleared: Tampering - product covering removed, arg 10300
2021-12-07 12:37:05.936 ZWave ZWave_SENSOR_NOTIFICATION_35 alarm: HomeSecurity: Event cleared: Tampering - product covering removed, arg 10300
2021-12-07 12:37:07.303 ZWave ZWave_SENSOR_NOTIFICATION_35 alarm: HomeSecurity: Tampering - product covering removed, arg 000
2021-12-07 12:37:11.024 ZWave ZWave_SENSOR_NOTIFICATION_35 alarm: HomeSecurity: Event cleared: Tampering - product covering removed, arg 10300
2021-12-07 12:37:29.472 ZWave ZWave_SENSOR_NOTIFICATION_35 alarm: HomeSecurity: Event cleared: Tampering - product covering removed, arg 10300
2021-12-07 12:37:30.772 ZWave ZWave_SENSOR_NOTIFICATION_35 alarm: HomeSecurity: Tampering - product covering removed, arg 000
2021-12-07 12:38:17.537 ZWave ZWave_SENSOR_NOTIFICATION_35 CMD: ZW_APPLICATION_UPDATE
2021-12-07 12:38:18.560 ZWave ZWave_SENSOR_NOTIFICATION_35 alarm: HomeSecurity: Event cleared: Tampering - product covering removed, arg 10300
2021-12-07 12:38:56.294 ZWave ZWave_SENSOR_NOTIFICATION_35 CMD: ZW_APPLICATION_UPDATE
2021-12-07 12:38:58.010 ZWave ZWave_SENSOR_NOTIFICATION_35 alarm: HomeSecurity: Event cleared: Tampering - product covering removed, arg 10300
2021-12-07 12:39:17.075 ZWave ZWave_SENSOR_NOTIFICATION_35 CMD: ZW_APPLICATION_UPDATE
2021-12-07 12:39:17.111 ZWave ZWave_SENSOR_NOTIFICATION_35 battery: 100 %
2021-12-07 12:39:17.111 ZWave ZWave_SENSOR_NOTIFICATION_35 batteryState: ok
2021-12-07 12:39:17.111 ZWave ZWave_SENSOR_NOTIFICATION_35 batteryPercent: 100
2021-12-07 12:39:18.567 ZWave ZWave_SENSOR_NOTIFICATION_35 alarm: HomeSecurity: Event cleared: Tampering - product covering removed, arg 10300

Das List des ZMEUZB Dongles:

Code Auswählen

Internals:
   CFGFN      /opt/fhem/FHEM/CUL_UZB.cfg
   CallbackNr 5
   Clients    :ZWave:
   DEF        /dev/ttyACM2@115200
   DeviceName /dev/ttyACM2@115200
   FD         14
   FUUID      5c72ce02-f33f-5fbf-e17d-2b7fdc1e398bf039
   MaxSendRetries 3
   NAME       ZME_UZB1
   NR         42
   PARTIAL    
   RAWMSG     000400060631050422015f
   ReadTime   1638877519.46182
   STATE      Initialized
   SendRetries 0
   SendTime   1638877350.48454
   TYPE       ZWDongle
   WaitForAck 0
   ZME_UZB1_MSGCNT 21699
   ZME_UZB1_TIME 2021-12-07 12:45:19
   devioNoSTATE 1
   homeId     ea8ad7de
   nodeIdHex  01
   nrNAck     0
   .attraggr:
   .attrminint:
   .clientArray:
     ZWave
   MatchList:
     1:ZWave    .*
   OLDREADINGS:
   READINGS:
     2021-12-05 19:37:49   caps            Vers:5 Rev:2 ManufID:0115 ProductType:0400 ProductID:0001 SERIAL_API_GET_INIT_DATA SERIAL_API_APPL_NODE_INFORMATION APPLICATION_COMMAND_HANDLER ZW_GET_CONTROLLER_CAPABILITIES SERIAL_API_SET_TIMEOUTS SERIAL_API_GET_CAPABILITIES SERIAL_API_SOFT_RESET UNKNOWN_09 UNKNOWN_0a ZW_SET_R_F_RECEIVE_MODE ZW_SET_SLEEP_MODE ZW_SEND_NODE_INFORMATION ZW_SEND_DATA ZW_SEND_DATA_MULTI ZW_GET_VERSION ZW_SEND_DATA_ABORT ZW_R_F_POWER_LEVEL_SET ZW_SEND_DATA_META ZW_GET_RANDOM MEMORY_GET_ID MEMORY_GET_BYTE MEMORY_PUT_BYTE MEMORY_GET_BUFFER MEMORY_PUT_BUFFER FLASH_AUTO_PROG_SET ZW_NVR_GET_VALUE NVM_GET_ID NVM_EXT_READ_LONG_BUFFER NVM_EXT_WRITE_LONG_BUFFER NVM_EXT_READ_LONG_BYTE NVM_EXT_WRITE_LONG_BYTE ZW_GET_NODE_PROTOCOL_INFO ZW_SET_DEFAULT ZW_REPLICATION_COMMAND_COMPLETE ZW_REPLICATION_SEND_DATA ZW_ASSIGN_RETURN_ROUTE ZW_DELETE_RETURN_ROUTE ZW_REQUEST_NODE_NEIGHBOR_UPDATE ZW_APPLICATION_UPDATE ZW_ADD_NODE_TO_NETWORK ZW_REMOVE_NODE_FROM_NETWORK ZW_CREATE_NEW_PRIMARY ZW_CONTROLLER_CHANGE ZW_SET_LEARN_MODE ZW_ASSIGN_SUC_RETURN_ROUTE ZW_REQUEST_NETWORK_UPDATE ZW_SET_SUC_NODE_ID ZW_DELETE_SUC_RETURN_ROUTE ZW_GET_SUC_NODE_ID ZW_SEND_SUC_ID ZW_EXPLORE_REQUEST_INCLUSION ZW_REQUEST_NODE_INFO ZW_REMOVE_FAILED_NODE_ID ZW_IS_FAILED_NODE ZW_REPLACE_FAILED_NODE UNKNOWN_66 UNKNOWN_67 ZW_FIRMWARE_UPDATE_NVM GET_ROUTING_TABLE_LINE LOCK_ROUTE_RESPONSE ZW_GET_PRIORITY_ROUTE ZW_SET_PRIORITY_ROUTE UNKNOWN_98 ZW_SET_WUT_TIMEOUT ZW_WATCHDOG_ENABLE ZW_WATCHDOG_DISABLE ZW_WATCHDOG_CHECK ZW_SET_EXT_INT_LEVEL ZW_RF_POWERLEVEL_GET ZW_TYPE_LIBRARY ZW_SEND_TEST_FRAME ZW_GET_PROTOCOL_STATUS WATCHDOG_START WATCHDOG_STOP ZW_SET_ROUTING_MAX UNKNOWN_ef ZME_FREQ_CHANGE ZME_BOOTLOADER_FLASH ZME_CAPABILITIES
     2021-12-05 19:37:49   ctrlCaps        MEMBER PRIMARY SUC
     2021-12-05 19:37:49   homeId          HomeId:ea8ad7de CtrlNodeIdHex:01
     2021-12-05 15:49:52   nodeList        ZME_UZB1 ZW_SW4 ZW_SW5_Hobby ZW6_FBHpump UNKNOWN_7 Waschm Trockner ZW_OG1_Dim_Sz ZW_KG_Sw_Flur ZW_KFOB ZW_SW20 ZW_OG2_Heizg_Haupt ZW_OG1_Bad ZW_AirCon ZW_EG_EBS_BWM zZW_28_BWM_nogo zZW_29_BWM_nogo
     2021-12-05 19:37:50   random          4bc74d8bfe219594761f41cdab29ccffd2f6f81eed767441e59a2becfe4466f0
     2020-09-26 15:41:00   routeFor_10     last ZW_OG2_Heizg_Haupt ZW_KG_Sw_Flur at 40kbps
     2020-09-26 15:45:12   routeFor_11     last ZW_SW4 at 9.6kbps
     2020-09-26 15:45:15   routeFor_12     last ZW_SW4 ZW_OG2_Heizg_Haupt at 40kbps
     2020-09-26 15:45:18   routeFor_13     last ZW_KG_Sw_Flur ZW6_FBHpump at 40kbps
     2020-09-26 15:45:20   routeFor_14     last ZW6_FBHpump ZW_KG_Sw_Flur at 40kbps
     2020-09-26 15:46:38   routeFor_15     last ZW_SW4 ZW_OG1_Dim_Sz ZW_OG2_Heizg_Haupt ZW_KG_Sw_Flur at 40kbps
     2020-09-26 18:02:37   routeFor_16     last ZW_OG2_Heizg_Haupt ZW_OG1_Bad ZW_KG_Sw_Flur at 40kbps
     2020-09-26 15:42:20   routeFor_17     last ZW_OG1_Dim_Sz at 100kbps
     2020-09-26 15:41:19   routeFor_2      last ZME_UZB1 at 40kbps
     2020-09-26 15:42:29   routeFor_20     last ZW_OG1_Dim_Sz at 100kbps
     2020-09-26 15:42:32   routeFor_21     last at 40kbps
     2020-09-26 15:42:36   routeFor_22     last at 40kbps
     2020-09-26 15:42:46   routeFor_24     last ZW_SW4 at 9.6kbps
     2020-09-26 15:42:50   routeFor_25     last ZW_SW4 ZW_SW20 ZW_OG1_Bad ZW6_FBHpump at 40kbps
     2020-09-26 15:41:29   routeFor_3      last ZW_KG_Sw_Flur at 40kbps
     2020-09-26 15:41:33   routeFor_4      last at 40kbps
     2020-09-26 15:41:37   routeFor_5      N/A
     2020-09-26 15:41:40   routeFor_6      last ZW_OG1_Dim_Sz at 40kbps
     2020-09-26 15:41:44   routeFor_7      last ZW_OG1_Dim_Sz ZW_OG2_Heizg_Haupt ZW_KG_Sw_Flur at 40kbps
     2020-09-26 15:41:52   routeFor_8      last ZW_OG2_Heizg_Haupt ZW_OG1_Dim_Sz ZW_KG_Sw_Flur at 40kbps
     2020-09-26 15:41:09   routeFor_9      last ZW_OG2_Heizg_Haupt ZW_KG_Sw_Flur at 40kbps
     2021-12-05 19:37:50   state           Initialized
     2021-12-05 19:37:49   sucNodeId       1
     2021-12-04 15:47:32   version         Z-Wave 3.99 STATIC_CONTROLLER
   SendStack:
Attributes:
   devStateIcon Initialized:cul_usb@green .*:cul@red
   group      CUL
   homeId     ea8ad7de
   icon       cul_usb
   room       System,ZWave

und noch das List des angelegten Device

Code Auswählen

Internals:
   CFGFN      
   DEF        ea8ad7de 35
   FUUID      61af43ac-f33f-5fbf-e4fb-4799d681c08f2993
   IODev      ZME_UZB1
   LASTInputDev ZME_UZB1
   MSGCNT     34
   NAME       ZWave_SENSOR_NOTIFICATION_35
   NR         19014
   STATE      wakeupInterval 86400 1
   TYPE       ZWave
   ZME_UZB1_MSGCNT 34
   ZME_UZB1_RAWMSG 000400230b7105070000ff0700010300
   ZME_UZB1_TIME 2021-12-07 12:39:18
   ZWaveSubDevice no
   cmdsPending 0
   homeId     ea8ad7de
   isWakeUp   1
   lastMsgSent 1638877159.07823
   nodeIdHex  23
   .attraggr:
   .attrminint:
   .vclasses:
     ALARM      4
     ASSOCIATION 2
     ASSOCIATION_GRP_INFO 1
     BATTERY    1
     CONFIGURATION 1
     DEVICE_RESET_LOCALLY 1
     FIRMWARE_UPDATE_MD 2
     MANUFACTURER_SPECIFIC 2
     POWERLEVEL 1
     SECURITY   1
     SENSOR_MULTILEVEL 7
     VERSION    2
     WAKE_UP    2
     ZWAVEPLUS_INFO 2
   READINGS:
     2021-12-07 12:39:17   CMD             ZW_APPLICATION_UPDATE
     2021-12-07 12:21:16   IODev           ZME_UZB1
     2021-12-07 12:39:18   alarm           HomeSecurity: Event cleared: Tampering - product covering removed, arg 10300
     2021-12-07 12:25:54   assocGroupCmdList_1 BATTERY:03 ALARM:05 DEVICE_RESET_LOCALLY:01 SENSOR_MULTILEVEL:05 BASIC:01 
     2021-12-07 12:23:19   assocGroup_1    Max 5 Nodes ZME_UZB1
     2021-12-07 12:23:19   assocGroups     1
     2021-12-07 12:39:17   battery         100 %
     2021-12-07 12:39:17   batteryPercent  100
     2021-12-07 12:39:17   batteryState    ok
     2021-12-07 12:22:48   configHumidityReportingThreshold 10
     2021-12-07 12:22:48   configLEDMode   3
     2021-12-07 12:22:48   configLuminanceReportingThreshold 10
     2021-12-07 12:22:48   configMotionSensorReTriggerDuration 3
     2021-12-07 12:22:48   configMotionSensorSensitivity6 4
     2021-12-07 12:22:48   configTemperatureReportingThreshold 10
     2021-12-07 12:22:48   configTemperatureUnit Celsius
     2021-12-07 12:21:19   model           Vision Security ZP3111 Multisensor 4in1
     2021-12-07 12:21:19   modelConfig     vision/zp3111.xml
     2021-12-07 12:21:19   modelId         0109-2021-2101
     2021-12-07 12:21:18   state           wakeupInterval 86400 1
     2021-12-07 12:39:19   timeToAck       0.026
     2021-12-07 12:39:19   transmit        OK
     2021-12-07 12:21:22   zwavePlusInfo    version:01 role:SleepingReportingSlave node:Z-Wave+Node installerIcon:0c07 userIcon:0c07
Attributes:
   classes    ZWAVEPLUS_INFO VERSION MANUFACTURER_SPECIFIC DEVICE_RESET_LOCALLY ASSOCIATION ASSOCIATION_GRP_INFO POWERLEVEL BATTERY ALARM SENSOR_MULTILEVEL CONFIGURATION WAKE_UP FIRMWARE_UPDATE_MD SECURITY
   room       ZWave
   vclasses   ALARM:4 ASSOCIATION:2 ASSOCIATION_GRP_INFO:1 BATTERY:1 CONFIGURATION:1 DEVICE_RESET_LOCALLY:1 FIRMWARE_UPDATE_MD:2 MANUFACTURER_SPECIFIC:2 POWERLEVEL:1 SECURITY:1 SENSOR_MULTILEVEL:7 VERSION:2 WAKE_UP:2 ZWAVEPLUS_INFO:2

FHEM Forum

Cyrus Vision ZP3111 4in1 PIR: Reading basicSet fehlt

wibi_