Gelöst: Qubino Flush Dimmer mit Temperatursensor

[Damu]

Hallo

Habe an einem Qubino Flush Dimmer einen Themperatursensor angeschlossen.
Habe das Teil so an FHEM angelernt und hat auch Funktioniert.
Es wurden das Hauptdevice und zwei SubDevice angelegt.
Die Themperatur wurde korrekt am SubDevice 02 angezeigt.
Später hab ich noch zwei Taster zusätzlich eingebaut und verdratet.
Die Taster hab ich dan in FHEM auf SensorBinary umgestellt (Parameter 100 und 101)
Danach den Dimmer nach Anleitung entfernt (Exclusion).
In FHEM gelöscht, neu gestarten und wieder neu Angelernt.
Jetzt wird mir der Temperaturwert nicht mehr im SubDevive 02 Angezeigt.
Abfrage "SmStatus geht auch nicht"
Im SubDevice 02 wird ein Schalter I2 oder I3 angezeigt.
Das SubDevice 3 scheint korrekt zu sein, nur das es den zustand von SubDevice 4 anzeigt.
Das SubDevice 4 bleibt leer.
In denn Asoationsgruppen 6, 9 und 11 hab ich den Hauptkontroller hinzugefügt.
Haupt Device:

Code Auswählen Erweitern


DeviceOverview
ZWave_SWITCH_MULTILEVEL_143

associationAdd 9 1

on

off

ZWave_SWITCH_MULTILEVEL_143
ZWave_SWITCH_MULTILEVEL_143
Internals
CFGFN

DEF
eba3b9eb 143
FUUID

625c03e7-f33f-d169-1a50-020e86c747f0ace0
IODev

POE_ZW_OG
LASTInputDev

POE_ZW_OG
MSGCNT

293
NAME

ZWave_SWITCH_MULTILEVEL_143
NR

712
POE_ZW_OG_MSGCNT

293
POE_ZW_OG_RAWMSG

0013ad0103f2007f7f7f7f7f010107000000000212888f
POE_ZW_OG_TIME

2022-04-17 15:19:19
STATE

associationAdd 9 1
TYPE

ZWave
ZWaveSubDevice

no
cmdsPending

0
endpointChildren

ZWave_SWITCH_MULTILEVEL_143.01,ZWave_SENSOR_MULTILEVEL_143.02,ZWave_Node_143.3,ZWave_Node_143.4
homeId

eba3b9eb
isWakeUp

lastMsgSent

1650201549.19881
nodeIdHex

8f
Readings
CMD

ZW_APPLICATION_UPDATE

2022-04-17 14:18:04
IODev

POE_ZW_OG

2022-04-17 14:11:19
SEND_DATA

failed:00

2022-04-17 15:19:11
alarm

System: Event cleared: State Idle

2022-04-17 15:10:04
alarmTypeSupported

PowerManagement

2022-04-17 14:39:33
assocGroup_1

Max 1 Nodes

2022-04-17 15:19:02
assocGroup_10

Max 16 Nodes

2022-04-17 15:19:09
assocGroup_11

Max 16 Nodes POE_ZW_OG

2022-04-17 15:19:17
assocGroup_2

Max 16 Nodes

2022-04-17 15:19:03
assocGroup_3

Max 16 Nodes

2022-04-17 15:19:03
assocGroup_4

Max 16 Nodes

2022-04-17 15:19:04
assocGroup_5

Max 16 Nodes

2022-04-17 15:19:04
assocGroup_6

Max 16 Nodes POE_ZW_OG

2022-04-17 15:19:05
assocGroup_7

Max 16 Nodes

2022-04-17 15:19:05
assocGroup_8

Max 16 Nodes

2022-04-17 15:19:06
assocGroup_9

Max 16 Nodes POE_ZW_OG

2022-04-17 15:19:07
assocGroups

11

2022-04-17 15:19:02
associatedWith

ZWave_SWITCH_MULTILEVEL_143.01,ZWave_SENSOR_MULTILEVEL_143.02,ZWave_Node_143.3,ZWave_Node_143.4

2022-04-17 14:55:54
associationAdd

9 1

2022-04-17 14:43:29
basicReport

0

2022-04-17 14:39:15
configActivateDeactivateFunctionsALLON10

ALLONActiveALLOFFActive

2022-04-17 14:15:31
configAutomaticTurningOffOutputAfter11

0

2022-04-17 14:15:31
configAutomaticTurningOnOutputAfterSet12

0

2022-04-17 14:15:32
configDigitalTemperatureSensor120

1

2022-04-17 14:37:47
configDimmingDuration

RespectStartLevel

2022-04-17 14:15:33
configDimmingTimeSoftOnOff

100

2022-04-17 14:15:33
configDimmingTimeWhenKeyPressed

3

2022-04-17 14:15:34
configEnableDisable3WaySwitch20

singlePushButtonConnectedToI1

2022-04-17 14:15:34
configEnableDisableDoubleClickFunction

Enabled

2022-04-17 14:15:35
configEnableDisableEndpointsI2OrSelect100

SensorBinary

2022-04-17 14:15:35
configEnableDisableEndpointsI3OrSelect101

SensorBinary

2022-04-17 14:38:32
configIgnoreStartLevel

respectStartLevel

2022-04-17 14:15:36
configInput1SwitchType

MonoStablePushButton

2022-04-17 14:15:37
configInput2ContactType

NONormallyOpen

2022-04-17 14:15:37
configInput2SwitchType

MonoStablePushButton

2022-04-17 14:15:38
configInput3ContactType

NONormallyOpen

2022-04-17 14:15:38
configMaximumDimmingValue

99

2022-04-17 14:15:39
configMinimumDimmingValue

1

2022-04-17 14:15:39
configPowerReportingInWattsByTime42

0

2022-04-17 14:15:40
configPowerReportingInWattsOnPower40

10

2022-04-17 14:15:40
configSavingTheStateOfTheRelayAfterA30

FlushDimmerModuleSavesItsState0

2022-04-17 14:15:41
configTemperatureSensorOffsetSettings

32536

2022-04-17 14:38:12
config_249

1

2022-04-17 14:37:07
config_250

0

2022-04-17 14:37:17
mcCapability_01

ZWAVEPLUS_INFO ASSOCIATION MULTI_CHANNEL_ASSOCIATION ASSOCIATION_GRP_INFO SWITCH_ALL SWITCH_BINARY SWITCH_MULTILEVEL METER ALARM MARK BASIC SWITCH_MULTILEVEL

2022-04-17 14:55:11
mcCapability_02

ZWAVEPLUS_INFO ASSOCIATION MULTI_CHANNEL_ASSOCIATION ASSOCIATION_GRP_INFO SENSOR_MULTILEVEL

2022-04-17 14:55:12
mcEndpoints

total 2, different

2022-04-17 14:55:11
mcaAdd

1 0 1 0

2022-04-17 14:11:26
model

Qubino (Goap) ZMNHDD1 Flush Dimmer

2022-04-17 14:11:19
modelConfig

qubino/ZMNHDDx.xml

2022-04-17 14:11:19
modelId

0159-0001-0051

2022-04-17 14:11:19
neighborUpdate

done

2022-04

Sub 01:

Code Auswählen Erweitern

DeviceOverview
ZWave_SWITCH_MULTILEVEL_143.01


on

off

ZWave_SWITCH_MULTILEVEL_143.01
ZWave_SWITCH_MULTILEVEL_143.01
Internals
CFGFN

DEF
eba3b9eb 36609
FUUID

625c03ee-f33f-d169-d2a9-904f74c3e42ca124
IODev

POE_ZW_OG
LASTInputDev

POE_ZW_OG
MSGCNT

20
NAME

ZWave_SWITCH_MULTILEVEL_143.01
NR

714
POE_ZW_OG_MSGCNT

20
POE_ZW_OG_RAWMSG

0004008f12600d01003202213400000000000000000000ab00
POE_ZW_OG_TIME

2022-04-17 14:48:02
STATE

off
TYPE

ZWave
ZWaveSubDevice

yes
endpointParent

ZWave_SWITCH_MULTILEVEL_143
homeId

eba3b9eb
isWakeUp

nodeIdHex

8f01
Readings
IODev

POE_ZW_OG

2022-04-17 14:17:24
assocGroup_1

Max 0 Nodes

2022-04-17 14:14:47
assocGroup_2

Max 16 Nodes

2022-04-17 14:14:47
assocGroup_3

Max 16 Nodes

2022-04-17 14:14:48
assocGroup_4

Max 16 Nodes

2022-04-17 14:14:49
assocGroups

4

2022-04-17 14:14:46
associatedWith

ZWave_SWITCH_MULTILEVEL_143

2022-04-17 14:55:54
mcaGroups

4

2022-04-17 14:15:07
mca_1

Max 0 Nodes POE_ZW_OG:0

2022-04-17 14:15:08
mca_2

Max 16

2022-04-17 14:15:09
mca_3

Max 16

2022-04-17 14:15:09
mca_4

Max 16

2022-04-17 14:15:10
power

0 W

2022-04-17 14:48:02
reportedState

off

2022-04-17 14:48:01
state

off

2022-04-17 14:48:01
ZWave_SWITCH_MULTILEVEL_143.01
Attributes
IODev

POE_ZW_OG

deleteattr
classes

ZWAVEPLUS_INFO ASSOCIATION MULTI_CHANNEL_ASSOCIATION ASSOCIATION_GRP_INFO SWITCH_ALL SWITCH_BINARY SWITCH_MULTILEVEL METER ALARM MARK BASIC SWITCH_MULTILEVEL

deleteattr
room

ZWave

deleteattr

Sub 02:

Code Auswählen Erweitern


DeviceOverview
ZWave_SENSOR_MULTILEVEL_143.02

closed

ZWave_SENSOR_MULTILEVEL_143.02
ZWave_SENSOR_MULTILEVEL_143.02
Internals
CFGFN

DEF
eba3b9eb 36610
FUUID

625c03ef-f33f-d169-e156-d734951b9739777f
IODev

POE_ZW_OG
LASTInputDev

POE_ZW_OG
MSGCNT

10
NAME

ZWave_SENSOR_MULTILEVEL_143.02
NR

715
POE_ZW_OG_MSGCNT

10
POE_ZW_OG_RAWMSG

0004008f07600d0200300300b000
POE_ZW_OG_TIME

2022-04-17 15:10:07
STATE

closed
TYPE

ZWave
ZWaveSubDevice

yes
endpointParent

ZWave_SWITCH_MULTILEVEL_143
homeId

eba3b9eb
isWakeUp

nodeIdHex

8f02
Readings
IODev

POE_ZW_OG

2022-04-17 14:13:00
assocGroup_1

Max 0 Nodes

2022-04-17 14:45:05
assocGroup_2

Max 16 Nodes POE_ZW_OG

2022-04-17 14:45:06
assocGroups

2

2022-04-17 14:45:05
associatedWith

ZWave_SWITCH_MULTILEVEL_143

2022-04-17 14:55:54
mcaGroups

2

2022-04-17 14:45:18
mca_1

Max 0 Nodes POE_ZW_OG:0

2022-04-17 14:45:18
mca_2

Max 16 Nodes POE_ZW_OG

2022-04-17 14:45:19
reportedState

closed

2022-04-17 15:10:07
state

closed

2022-04-17 15:10:07
zwavePlusInfo

version:01 role:AlwaysOnSlave node:Z-Wave+Node installerIcon:0d01 userIcon:0d01

2022-04-17 14:12:36
ZWave_SENSOR_MULTILEVEL_143.02
Attributes
IODev

POE_ZW_OG

deleteattr
classes

ZWAVEPLUS_INFO ASSOCIATION MULTI_CHANNEL_ASSOCIATION ASSOCIATION_GRP_INFO SENSOR_MULTILEVEL

deleteattr
room

ZWave

deleteattr
vclasses

ASSOCIATION:2 ASSOCIATION_GRP_INFO:2 MULTI_CHANNEL_ASSOCIATION:3 SENSOR_MULTILEVEL:7 VERSION:2 ZWAVEPLUS_INFO:2

deleteattr

Sub 3:

Code Auswählen Erweitern


DeviceOverview
ZWave_Node_143.3

closed

ZWave_Node_143.3
Internals
CFGFN

DEF
eba3b9eb 36611
FUUID

625c0c85-f33f-d169-c6a8-3d2b69f7587ed399
IODev

POE_ZW_OG
LASTInputDev

POE_ZW_OG
MSGCNT

1
NAME

ZWave_Node_143.3
NR

827
POE_ZW_OG_MSGCNT

1
POE_ZW_OG_RAWMSG

0004008f07600d0300300300b100
POE_ZW_OG_TIME

2022-04-17 15:10:09
STATE

closed
TYPE

ZWave
ZWaveSubDevice

yes
endpointParent

ZWave_SWITCH_MULTILEVEL_143
homeId

eba3b9eb
isWakeUp

nodeIdHex

8f03
Readings
IODev

POE_ZW_OG

2022-04-17 14:48:05
associatedWith

ZWave_SWITCH_MULTILEVEL_143

2022-04-17 14:55:54
reportedState

closed

2022-04-17 15:10:09
state

closed

2022-04-17 15:10:09

Sub 4:

Code Auswählen Erweitern


DeviceOverview
ZWave_Node_143.4

???

ZWave_Node_143.4
Internals
CFGFN

DEF
eba3b9eb 36612
FUUID

625c0e5a-f33f-d169-520e-f19f54c9246408af
IODev

POE_ZW_OG
LASTInputDev

POE_ZW_OG
MSGCNT

36
NAME

ZWave_Node_143.4
NR

843
POE_ZW_OG_MSGCNT

36
POE_ZW_OG_RAWMSG

0004008f0a600d04003105012200bfae00
POE_ZW_OG_TIME

2022-04-17 15:04:28
STATE

???
TYPE

ZWave
ZWaveSubDevice

yes
endpointParent

ZWave_SWITCH_MULTILEVEL_143
homeId

eba3b9eb
isWakeUp

nodeIdHex

8f04
Readings
IODev

POE_ZW_OG

2022-04-17 14:55:54
associatedWith

ZWave_SWITCH_MULTILEVEL_143

2022-04-17 14:55:54
temperature

19.1 C

2022-04-17 15:04:28

Habe gerade gesehen das jetzt eine Temperautur im SubDevice 4 angezeigt wird??

[Damu]

Hab hier eine Qubino Anleitung gefunden.
https://qubino.com/manuals/Flush_Dimmer.pdf

Hier steht:

15. Z-Wave Command Classes
ZWAVEPLUS_INFO_REPORT_ROLE_TYPE_SLAVE_ALWAYS_0N
GENERIC_TYPE_SWITCH_MULTILEVEL
SPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
Z-Wave Command Classes:
COMMAND_CLASS_ZWAVEPLUS_INFO_V2,
COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1
COMMAND_CLASS_POWERLEVEL_V1
COMMAND_CLASS_VERSION_V2
COMMAND_CLASS_SWITCH_ALL_V1
COMMAND_CLASS_SWITCH_BINARY_V1
COMMAND_CLASS_SENSOR_BINARY_V1
COMMAND_CLASS_SWITCH_MULTILEVEL_V3
COMMAND_CLASS_METER_V4
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
COMMAND_CLASS_SENSOR_MULTILEVEl_V7
COMMAND_CLASS_NOTIFICATION_V5
COMMAND_CLASS_MULTI_CHANNEL_V4
COMMAND_CLASS_ASSOCIATION_V2
COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V2
COMMAND_CLASS_CONFIGURATION_V1
COMMAND_CLASS_MARK
EN.
62
COMMAND_CLASS_SWITCH_MULTILEVEL_V3
Endpoint 1
Device Class:
ZWAVEPLUS_INFO_REPORT_ROLE_TYPE_SLAVE_ALWAYS_0N
GENERIC_TYPE_SWITCH_MULTILEVEL
SPE SPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
Command Classes:
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
COMMAND_CLASS_ASSOCIATION_2
COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V2
COMMAND_CLASS_SWITCH_ALL_V1
COMMAND_CLASS_SWITCH_BINARY_V1
COMMAND_CLASS_SWITCH_MULTILEVEL_V3
COMMAND_CLASS_METER_V4
COMMAND_CLASS_NOTIFICATION_V5
COMMAND_CLASS_MARK
COMMAND_CLASS_SWITCH_MULTILEVEL_V3
Endpoint 2 (I2):
Device Class:
ZWAVEPLUS_INFO_REPORT_ROLE_TYPE_SLAVE_ALWAYS_0N
GENERIC_TYPE_SENSOR_NOTIFICATION
SPECIFIC_TYPE_NOTIFICATION_SENSOR
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
EN.
63
COMMAND_CLASS_ASSOCIATION_V2
COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V2
COMMAND_CLASS_SENSOR_BINARY_V1
COMMAND_CLASS_NOTIFICATION_V5
Endpoint 3 (I3):
Device Class:
ZWAVEPLUS_INFO_REPORT_ROLE_TYPE_SLAVE_ALWAYS_0N
GENERIC_TYPE_SENSOR_NOTIFICATION
SPECIFIC_TYPE_NOTIFICATION_SENSOR
Command Classes:
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
COMMAND_CLASS_ASSOCIATION_V2
COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V2
COMMAND_CLASS_SENSOR_BINARY_V1
COMMAND_CLASS_NOTIFICATION_V5
Endpoint 4:
Device Class:
ZWAVEPLUS_INFO_REPORT_ROLE_TYPE_SLAVE_ALWAYS_0N
GENERIC_TYPE_SENSOR_MULTILEVEL
SPECIFIC_TYPE_ROUTING_SENSOR_MULTILEVEL
Command Classes:
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
EN.
64
COMMAND_CLASS_ASSOCIATION_V2
COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V2
COMMAND_CLASS_SENSOR_MULTILEVEL_V7
NOTE: Controlled Command Classes are listed after the COMMAND_CLASS_MARK command
class.
NOTE: The Endpoint 4 command class list only applies if an external digital temperature sensor
(sold separately) is connected to the TS terminal. If the sensor is not connected, the following
command class is not supported by the device:
COMMAND_CLASS_SENSOR_MULTILEVEL_V7
COMMAND_CLASS_NOTIFICATION_V5 events:
- Smoke Alarm v2 – Smoke detected, unknown loc. (0x02)
- CO Alarm v2 – CO detected, unknown location (0x02)
- CO2 Alarm – CO2 detected, unknown loc (0x02)
- Heat Alarm v2 – Overheat detected, unknown location (0x02)
- Water Alarm v2 – Water Leak detected, unknown location (0x02)
- Home Security – Motion Detection, unknown location (0x08)
COMMAND_CLASS_BASIC:
- The device will be turned ON or OFF after receiving the BASIC_SET command. To be turned ON:
[Command Class Basic, Basic Set, Basic Value = 0x01~0x63 in percentage; FF set to last value]
- To be turned OFF: [Command Class Basic, Basic Set, Basic Value = 0x00]
COMMAND_CLASS_METER
• Default values:
EN.
65
o Rate Type = 1 (Import)
o Scale = 0 (kWh)
This product can be included and operated in any Z-Wave network with other Z-Wave certified
devices from any other manufacturers. All constantly powered nodes in the same network will
act as repeaters regardless of the vendor in order to increase reliability of the network

Die Endpunkte werden in FHEM leider anders angelegt.

[rudolfkoenig]

Ich kann versichern, dass die Endpunkte im FHEM nicht erfunden werden, sondern strikt das vom Geraet gesendete verwendet wird.

[Damu]

So hat endlich geklappt.
Ein Elektrisches Relais oder so was ähnliches, das die Arbeit von 3xUmschalten in 3Sek (oder so), zuverläsig erledigt wäre bei Qubino nicht schlecht.

Hatte es wohl immer zuweniglange Stromlos gemacht.

Musste diesmal beim Inkudieren nur den Controller auf AddNode On stellen.
Es hatt mir jetzt die Node 144 erstellt.
Vorher war es immer die 143 und das x mal.

Mann muss Ablernen und neu Anlernen.
Es wird jetzt ein mcCapability_0x für jeden Endpunkt ausgelesen, vorher war es nur für 01 und 02.