Modul für ONKYO AV Receiver (und neuere Pioneer AV Receiver)

Begonnen von Loredo, 30 September 2013, 14:52:36

Vorheriges Thema - Nächstes Thema

1of16

Zitat von: Loredo am 25 Mai 2016, 15:30:18

Doch, die Zone hat die selben Readings, da man sie ja auch getrennt an und aus schalten kann. Das power-Reading sagt auch nur, ob das Gerät eingeschaltet bzw. in Verwendung ist oder nicht. Nur an den readings state und presence sieht man, ob das Gerät im Netzwerk erreichbar ist. Dafür kann es aber auch im Standby sein.


Den zweiten Receiver kannst du nun nicht mehr mit dem ONKYO_AVR Modul ansprechen. Wenn du diese Definition wie oben machst, dann hast du nur noch ein zweites Mal die Main-Zone. Du musst das neue ONKYO_AVR_ZONE Modul verwenden und deine alte Zone löschen. Am einfachsten geht die neue Definition, wenn du in der Main-Zone über den get-Befehl die Slave-Zone anlegst.




Gruß
Julian
Moin,

irgendwie stehe ich wohl auf dem Schlauch: via get kann ich in der "Main" Zone keine Slave-Zone anlegen. Der Befehlt "list avr" sagt immer noch, dass das Gerät nur eine Zone habe, es hat aber zwei:

Save config ?
Tablet-UI
Anja
Badezimmer
Bewaesserung
CUL_HM
CUL_HOERMANN
Dachboden
Garage
Garten
Heizung
Hobbyraum
IT
Knöpfe
OWDevice
Residents
SB_PLAYER
Schalter
Schlafzimmer
Terrasse
Unsorted
Wetter
Wohnzimmer
system
test
icoEverything Everything
Logfile
Commandref
Remote doc
Edit files
Select style
Event monitor

Internals:
   CFGFN
   CHANNEL    F3
   DEF        192.168.1.97 pre2013
   DeviceName 192.168.1.97:60128
   FD         82
   INPUT      01
   NAME       avr
   NR         433
   NTFY_ORDER 50-avr
   PARTIAL
   PROTOCOLVERSION pre2013
   SCREENLAYER 0
   STATE      on
   TYPE       ONKYO_AVR
   ZONE       1

Auszug ist gekürzt....

Wenn ich die zweite Zone via Fernbedienung o.ä. aktiviere und z.B. auf den Eingang "PC" wechsle und die Lautstärke ändere, passiert folgendes (verbose 5 Log):
2016.05.25 19:02:34.129 5: ONKYO_AVR avr: raw 49534350000000100000000a0100000021314e53424f4e1a0d0a49534350000000100000000a0100000021315a4d5430301a0d0a49534350000000100000000a0100000021315a564c30351a0d0a49534350000000100000000d01000000213154555a30303532321a0d0a ISCP............!1NSBON...ISCP............!1ZMT00...ISCP............!1ZVL05...ISCP............!1TUZ00522...
2016.05.25 19:02:34.131 4: ONKYO_AVR avr: con _NSB(NSBON): FAIL: Don't know how to convert, not in ONKYOdb: NSBON
2016.05.25 19:02:34.132 4: ONKYO_AVR avr: rcv _NSB = ON
2016.05.25 19:02:35.646 5: ONKYO_AVR avr: raw 49534350000000100000000a01000000213150525a30301a0d0a ISCP............!1PRZ00...
2016.05.25 19:02:35.648 4: ONKYO_AVR avr: con _PRZ(PRZ00): FAIL: Don't know how to convert, not in ONKYOdb: PRZ00
2016.05.25 19:02:35.649 4: ONKYO_AVR avr: rcv _PRZ = 00
2016.05.25 19:02:38.712 5: ONKYO_AVR avr: raw 49534350000000100000000b0100000021314e4c53432d501a0d0a ISCP............!1NLSC-P...
2016.05.25 19:02:38.714 5: ONKYO_AVR avr: con net-usb-list-info(NLSC-P): unconverted return of zone1 value 'C-P'
2016.05.25 19:02:38.715 4: ONKYO_AVR avr: rcv net-usb-list-info = C-P
2016.05.25 19:02:38.742 5: ONKYO_AVR avr: called function ONKYO_AVR_Set()
2016.05.25 19:02:38.746 5: ONKYO_AVR avr: called function ONKYO_AVR_Set()
2016.05.25 19:02:38.810 5: ONKYO_AVR avr: raw 49534350000000100000000a010000002131534c5a30351a0d0a ISCP............!1SLZ05...
2016.05.25 19:02:38.813 4: ONKYO_AVR avr: con _SLZ(SLZ05): FAIL: Don't know how to convert, not in ONKYOdb: SLZ05
2016.05.25 19:02:38.814 4: ONKYO_AVR avr: rcv _SLZ = 05
2016.05.25 19:02:38.830 5: ONKYO_AVR avr: called function ONKYO_AVR_Set()
2016.05.25 19:02:38.835 5: ONKYO_AVR avr: called function ONKYO_AVR_Set()
2016.05.25 19:02:42.889 5: ONKYO_AVR avr: raw 49534350000000100000000a0100000021315a564c30371a0d0a ISCP............!1ZVL07...
2016.05.25 19:02:42.892 4: ONKYO_AVR avr: con _ZVL(ZVL07): FAIL: Don't know how to convert, not in ONKYOdb: ZVL07
2016.05.25 19:02:42.892 4: ONKYO_AVR avr: rcv _ZVL = 07
2016.05.25 19:02:42.928 5: ONKYO_AVR avr: called function ONKYO_AVR_Set()
2016.05.25 19:02:42.932 5: ONKYO_AVR avr: called function ONKYO_AVR_Set()
2016.05.25 19:02:44.818 5: ONKYO_AVR avr: raw 49534350000000100000000a0100000021315a564c30381a0d0a ISCP............!1ZVL08...
2016.05.25 19:02:44.821 4: ONKYO_AVR avr: con _ZVL(ZVL08): FAIL: Don't know how to convert, not in ONKYOdb: ZVL08
2016.05.25 19:02:44.822 4: ONKYO_AVR avr: rcv _ZVL = 08
2016.05.25 19:02:44.852 5: ONKYO_AVR avr: called function ONKYO_AVR_Set()
2016.05.25 19:02:44.857 5: ONKYO_AVR avr: called function ONKYO_AVR_Set()


Irgendwie würde ich sagen, dass das Modul nicht mit der zweiten Zone kommunizieren kann?!

Grüße
1of16
FHEM in einem Dockercontainer
VCCU mit 3x HM-MOD-UART und 1x HmLGW
1x CCU2
2x nanoCUL 433MHz, 3x RPi3, Unifi-Controller mit drei APs für presence und Unifi Protec
div. weitere HM, ein paar HmIP Geräte und div. Shellys

pc1246

Hallo 1of16
Du musst schon lesen was Julian schreibt. Fuer die zweite Zone brauchst du ein weiteres Modul! Ich habe das mal fuer Dich gesucht: https://forum.fhem.de/index.php/topic,15024.msg453331.html#msg453331
Have fun
Christoph
HP T610
Onkyo_AVR;3 Enigma2; SB_Server ; SB_Player; HM-USB mit 15 HM-CC-RT-DN, 3 HM_WDS10_TH_O, 6 HM-Sec-SCo, 4 HM-Sec-MDIR-2, 1 HM-Sen-MDIR-O-2, 8 Ferion 5000 OW ; PhilipsTV; 4 harmony hub; Jeelink mit 9 PCA301; Somfy; S7-300; 3 LGW; HUE; HM-IP auf Charly

1of16

#407
Zitat von: pc1246 am 25 Mai 2016, 19:23:35
Hallo 1of16
Du musst schon lesen was Julian schreibt. Fuer die zweite Zone brauchst du ein weiteres Modul! Ich habe das mal fuer Dich gesucht: https://forum.fhem.de/index.php/topic,15024.msg453331.html#msg453331
Have fun
Christoph
Moin,
wenn die Lösung so einfach wäre, dass ich nur nicht richtig gelesen habe, wäre es schön :)
Das Zonen-Modul hatte ich schon vergeblich versucht zu nutzen, daher habe ich jetzt folgendes gemacht:
Alle AVR-Einträge (also Master und 2. Zone) gelöscht, FHEM aktualisiert und neu gestartet (das update von heute Nacht ist also drin).
Der Haupt-AVR Eintrag funktioniert soweit ok:
Internals:
   CFGFN
   CHANNEL    F3
   DEF        192.168.1.97 pre2013
   DeviceName 192.168.1.97:60128
   FD         84
   INPUT      01
   NAME       avr
   NR         433
   NTFY_ORDER 50-avr
   PARTIAL
   PROTOCOLVERSION pre2013
   SCREENLAYER 0
   STATE      on
   TYPE       ONKYO_AVR
   ZONE       1
   Helper:
     Dblog:
       _nsb:
         Logdb:
           TIME       1464195596.79273
           VALUE      ON
       _prz:
         Logdb:
           TIME       1464195694.55608
           VALUE      00
       _slz:
         Logdb:
           TIME       1464195758.81864
           VALUE      05
       _zmt:
         Logdb:
           TIME       1464195694.0658
           VALUE      00
       _zpw:
         Logdb:
           TIME       1464202071.63763
           VALUE      01
       _zvl:
         Logdb:
           TIME       1464197492.66006
           VALUE      08
       Audin_ch:
         Logdb:
           TIME       1464195598.10335
           VALUE      2
       Audin_enc:
         Logdb:
           TIME       1464195598.10335
           VALUE      Multich PCM
       Audin_srate:
         Logdb:
           TIME       1464195598.10335
           VALUE      2
       Audin_src:
         Logdb:
           TIME       1464195598.10335
           VALUE      HDMI 2
       Audout_ch:
         Logdb:
           TIME       1464195598.10335
           VALUE      2
       Audout_mode:
         Logdb:
           TIME       1464195598.10335
           VALUE      TV Logic
       Center-temporary-level:
         Logdb:
           TIME       1464195597.48079
           VALUE      +1
       Currenttrackduration:
         Logdb:
           TIME       1464195597.08462
           VALUE      --:--
       Currenttrackposition:
         Logdb:
           TIME       1464195597.08462
           VALUE      --:--
       Input:
         Logdb:
           TIME       1464195596.47954
           VALUE      video2
       Ipod-mode-change:
         Logdb:
           TIME       1464195596.89721
           VALUE      OFF
       Listening-mode:
         Logdb:
           TIME       1464201433.10866
           VALUE      direct
       Music-optimizer:
         Logdb:
           TIME       1464195597.89825
           VALUE      off
       Mute:
         Logdb:
           TIME       1464195597.25267
           VALUE      off
       Playstatus:
         Logdb:
           TIME       1464195597.08462
           VALUE      stopped
       Power:
         Logdb:
           TIME       1464201702.20941
           VALUE      on
       Presence:
         Logdb:
           TIME       1464201680.57748
           VALUE      present
       Preset:
         Logdb:
           TIME       1464195597.79575
           VALUE      00
       Repeat:
         Logdb:
           TIME       1464195597.08462
           VALUE      off
       Screencurser:
         Logdb:
           TIME       1464195758.71865
           VALUE      -
       Screeniconleft:
         Logdb:
           TIME       1464195621.52492
           VALUE      00
       Screeniconright:
         Logdb:
           TIME       1464195621.52492
           VALUE      00
       Screenitemc0001:
         Logdb:
           TIME       1464195622.68495
           VALUE      Last.fm Internet Radio
       Screenitemc0002:
         Logdb:
           TIME       1464195621.76777
           VALUE      Spotify
       Screenitemc0003:
         Logdb:
           TIME       1464195621.85549
           VALUE      AUPEO! PERSONAL RADIO
       Screenitemc0004:
         Logdb:
           TIME       1464195621.95903
           VALUE      simfy
       Screenitemc0005:
         Logdb:
           TIME       1464195622.06104
           VALUE      MP3tunes
       Screenitemc0006:
         Logdb:
           TIME       1464195622.16351
           VALUE      My Favorites
       Screenitemc0007:
         Logdb:
           TIME       1464195622.2636
           VALUE      Home Media
       Screenitemc0008:
         Logdb:
           TIME       1464195622.3788
           VALUE      DLNA
       Screenitemcnt:
         Logdb:
           TIME       1464195621.52492
           VALUE      0000
       Screenlayer:
         Logdb:
           TIME       1464195621.52492
           VALUE      00
       Screenlayerinfo:
         Logdb:
           TIME       1464198811.78395
           VALUE      0
       Screenlistpos:
         Logdb:
           TIME       1464198811.78395
           VALUE      0000
       Screentype:
         Logdb:
           TIME       1464195621.52492
           VALUE      0
       Shuffle:
         Logdb:
           TIME       1464195597.08462
           VALUE      off
       State:
         Logdb:
           TIME       1464201680.57748
           VALUE      CONNECTED
       Stateav:
         Logdb:
           TIME       1464201702.20941
           VALUE      on
       Subwoofer-temporary-level:
         Logdb:
           TIME       1464195597.58567
           VALUE      +6
       Tone-front:
         Logdb:
           TIME       1464195597.37007
           VALUE      B00T00
       Tuning:
         Logdb:
           TIME       1464195597.69508
           VALUE      00522
       Volume:
         Logdb:
           TIME       1464195719.24266
           VALUE      14
   Readings:
     2016-05-25 18:59:56   _NSB            ON
     2016-05-25 19:01:34   _PRZ            00
     2016-05-25 19:02:38   _SLZ            05
     2016-05-25 19:01:34   _ZMT            00
     2016-05-25 20:47:51   _ZPW            01
     2016-05-25 19:31:32   _ZVL            08
     2016-05-25 18:59:58   audin_ch        2
     2016-05-25 18:59:58   audin_enc       Multich PCM
     2016-05-25 18:59:58   audin_srate     2
     2016-05-25 18:59:58   audin_src       HDMI 2
     2016-05-25 18:59:58   audout_ch       2
     2016-05-25 18:59:58   audout_mode     TV Logic
     2016-05-25 18:59:57   center-temporary-level +1
     2016-05-25 19:00:21   channel
     2016-05-25 18:59:57   currentAlbum
     2016-05-25 18:59:57   currentArtist
     2016-05-25 18:59:57   currentTitle
     2016-05-25 18:59:57   currentTrackDuration --:--
     2016-05-25 18:59:57   currentTrackPosition --:--
     2016-05-25 18:59:56   input           video2
     2016-05-25 18:59:56   ipod-mode-change OFF
     2016-05-25 20:37:13   listening-mode  direct
     2016-05-25 18:59:57   music-optimizer off
     2016-05-25 18:59:57   mute            off
     2016-05-25 18:59:57   playStatus      stopped
     2016-05-25 20:41:42   power           on
     2016-05-25 20:41:20   presence        present
     2016-05-25 18:59:57   preset          00
     2016-05-25 18:59:57   repeat          off
     2016-05-25 19:02:38   screenCurser    -
     2016-05-25 19:00:21   screenIconLeft  00
     2016-05-25 19:00:21   screenIconRight 00
     2016-05-25 19:00:22   screenItemC0001 Last.fm Internet Radio
     2016-05-25 19:00:21   screenItemC0002 Spotify
     2016-05-25 19:00:21   screenItemC0003 AUPEO! PERSONAL RADIO
     2016-05-25 19:00:21   screenItemC0004 simfy
     2016-05-25 19:00:22   screenItemC0005 MP3tunes
     2016-05-25 19:00:22   screenItemC0006 My Favorites
     2016-05-25 19:00:22   screenItemC0007 Home Media
     2016-05-25 19:00:22   screenItemC0008 DLNA
     2016-05-25 19:00:21   screenItemCnt   0000
     2016-05-25 19:00:21   screenLayer     00
     2016-05-25 19:53:31   screenLayerInfo 0
     2016-05-25 19:53:31   screenListPos   0000
     2016-05-25 19:00:21   screenStatus
     2016-05-25 19:00:21   screenTitle
     2016-05-25 19:00:21   screenType      0
     2016-05-25 18:59:57   shuffle         off
     2016-05-25 20:41:20   state           opened
     2016-05-25 20:41:42   stateAV         on
     2016-05-25 18:59:57   subwoofer-temporary-level +6
     2016-05-25 18:59:57   tone-front      B00T00
     2016-05-25 18:59:57   tuning          00522
     2016-05-25 19:01:59   volume          14
   Screen:
     0:
       List:
         0000:
           curser     0
           listpos    1
         0001:
           curser     0
           data       Last.fm Internet Radio
           listpos    0
           property   -
         0002:
           curser     0
           data       Spotify
           listpos    0
           property   -
         0003:
           curser     0
           data       AUPEO! PERSONAL RADIO
           listpos    0
           property   -
         0004:
           curser     0
           data       simfy
           listpos    0
           property   -
         0005:
           curser     0
           data       MP3tunes
           listpos    0
           property   -
         0006:
           curser     0
           data       My Favorites
           listpos    0
           property   -
         0007:
           curser     0
           data       Home Media
           listpos    0
           property   -
         0008:
           curser     0
           data       DLNA
           listpos    0
           property   -
   Helper:
     nextConnectionCheck 1464202161.63141
     Receiver:
       Device:
         Netservicelist:
           Netservice:
             F3:
         Selectorlist:
         Zonelist:
           Zone:
             1:
               name       Main
               value      1
       Input:
       Input_aliases:
Attributes:
   cmdIcon    muteT:rc_MUTE previous:rc_PREVIOUS next:rc_NEXT play:rc_PLAY pause:rc_PAUSE stop:rc_STOP shuffleT:rc_SHUFFLE repeatT:rc_REPEAT
   devStateIcon on:rc_GREEN@green:off off:rc_STOP:on absent:rc_RED playing:rc_PLAY@green:pause paused:rc_PAUSE@green:play muted:rc_MUTE@green:muteT fast-rewind:rc_REW@green:play fast-forward:rc_FF@green:play interrupted:rc_PAUSE@yellow:play
   model      pre2013
   room       Wohnzimmer
   stateFormat stateAV
   verbose    5
   webCmd     volume:muteT:input:previous:next


Der Eintrag für die zweite Zone sieht immer noch nicht gut aus:
Internals:
   CFGFN
   CHANGED
   DEF        192.168.1.97
   INPUT
   IODev      avr
   LASTInputDev avr
   MSGCNT     2
   NAME       avr_2
   NR         1067
   STATE      off
   TYPE       ONKYO_AVR_ZONE
   ZONE       192.168.1.97
   avr_MSGCNT 2
   avr_TIME   2016-05-25 20:41:20
   Helper:
     Dblog:
       Power:
         Logdb:
           TIME       1464201589.25682
           VALUE      off
       Presence:
         Logdb:
           TIME       1464201589.25682
           VALUE      present
       Stateav:
         Logdb:
           TIME       1464201589.25682
           VALUE      off
   Readings:
     2016-05-25 20:39:49   power           off
     2016-05-25 20:39:49   presence        present
     2016-05-25 20:39:49   stateAV         off
   Helper:
     Receiver:
       Input_names:
Attributes:
   IODev      avr
   cmdIcon    muteT:rc_MUTE previous:rc_PREVIOUS next:rc_NEXT play:rc_PLAY pause:rc_PAUSE stop:rc_STOP shuffleT:rc_SHUFFLE repeatT:rc_REPEAT
   devStateIcon on:rc_GREEN@green:off off:rc_STOP:on absent:rc_RED playing:rc_PLAY@green:pause paused:rc_PAUSE@green:play muted:rc_MUTE@green:muteT fast-rewind:rc_REW@green:play fast-forward:rc_FF@green:play interrupted:rc_PAUSE@yellow:play
   room       Wohnzimmer
   stateFormat stateAV
   verbose    5
   webCmd     volume:muteT:input:previous:next


Wenn ich die zweite Zone des AVR einschalte, tauchen folgende Logeinträge auf:
2016.05.25 20:47:51.628 5: ONKYO_AVR avr: raw 49534350000000100000000a0100000021315a505730311a0d0a ISCP............!1ZPW01...
2016.05.25 20:47:51.630 4: ONKYO_AVR avr: con _ZPW(ZPW01): FAIL: Don't know how to convert, not in ONKYOdb: ZPW01
2016.05.25 20:47:51.632 4: ONKYO_AVR avr: rcv _ZPW = 01
2016.05.25 20:47:51.672 5: ONKYO_AVR avr: called function ONKYO_AVR_Set()
2016.05.25 20:47:51.738 5: ONKYO_AVR avr: called function ONKYO_AVR_Set()


Ich bin für Tpps, was ich ggf. falsch mache, dankbar. Aber irgendwie vermute ich im Moment, dass der Fehler nicht bei mir liegt.

Grüße
Philip
FHEM in einem Dockercontainer
VCCU mit 3x HM-MOD-UART und 1x HmLGW
1x CCU2
2x nanoCUL 433MHz, 3x RPi3, Unifi-Controller mit drei APs für presence und Unifi Protec
div. weitere HM, ein paar HmIP Geräte und div. Shellys

Loredo

Zitat von: 1of16 am 25 Mai 2016, 19:05:16

Internals:
   CFGFN
   CHANNEL    F3
   DEF        192.168.1.97 pre2013
   DeviceName 192.168.1.97:60128
   FD         82
   INPUT      01
   NAME       avr
   NR         433
   NTFY_ORDER 50-avr
   PARTIAL
   PROTOCOLVERSION pre2013
   SCREENLAYER 0
   STATE      on
   TYPE       ONKYO_AVR
   ZONE       1

Auszug ist gekürzt....


Falscher Auszug bzw falsch gekürzt. das Internal ZONE zeigt die gesteuerte Zone an, nicht die Gesamtzahl.
Die Gesamtzahl steht im Hash {helper}{receiver} mit drin, also viel weiter unten:




Helper:
     nextConnectionCheck 1464252579.4741
     Receiver:
       status     ok
       Device:
         brand      ONKYO
         category   AV Receiver
         destination xx
         firmwareversion 1091-5110-0000-0302
         id         TX-NR626
         model      TX-NR626
         year       2013
         Controllist:
         Zonelist:
           count      4
           Zone:
             1:
               name       Main
               value      1
               volmax     80
               volstep    1
             2:
               name       Zone2
               value      1
               volmax     80
               volstep    1
             3:
               name       Zone3
               value      0
               volmax     0
               volstep    1
             4:
               name       Zone4
               value      0
               volmax     0
               volstep    1



Dabei kann man nur die Zonen verwenden, bei denen value=1 gesetzt ist. Andere lassen sich nicht ansteuern, falls es noch weitere geben sollte.
Hat meine Arbeit dir geholfen? ⟹ https://paypal.me/pools/c/8gDLrIWrG9

Maintainer:
FHEM-Docker Image, https://github.com/fhem, Astro(Co-Maintainer), ENIGMA2, GEOFANCY, GUEST, HP1000, Installer, LaMetric2, MSG, msgConfig, npmjs, PET, PHTV, Pushover, RESIDENTS, ROOMMATE, search, THINKINGCLEANER

Loredo

#409
Zitat von: 1of16 am 25 Mai 2016, 20:51:34
Wenn ich die zweite Zone des AVR einschalte, tauchen folgende Logeinträge auf:
2016.05.25 20:47:51.628 5: ONKYO_AVR avr: raw 49534350000000100000000a0100000021315a505730311a0d0a ISCP............!1ZPW01...
2016.05.25 20:47:51.630 4: ONKYO_AVR avr: con _ZPW(ZPW01): FAIL: Don't know how to convert, not in ONKYOdb: ZPW01
2016.05.25 20:47:51.632 4: ONKYO_AVR avr: rcv _ZPW = 01
2016.05.25 20:47:51.672 5: ONKYO_AVR avr: called function ONKYO_AVR_Set()
2016.05.25 20:47:51.738 5: ONKYO_AVR avr: called function ONKYO_AVR_Set()


Ich bin für Tpps, was ich ggf. falsch mache, dankbar. Aber irgendwie vermute ich im Moment, dass der Fehler nicht bei mir liegt.


Alle, die diese Meldungen bekommen, haben die ONKYO Moduldateien nicht über die offizielle Update Funktion eingespielt, sondern irgendetwas manuell gemacht und dabei die aktuellste ONKYOdb.pm Datei vergessen. Die gibts nur im SVN, die habe ich hier gar nicht mehr hochgeladen.


Es macht generell keinen Sinn Dateien aus dem Forum manuell einzuspielen, wenn diese bereits über das SVN angeboten werden. Ein Mix gar ist fatal und hilft nicht bei der Suche nach möglichen Fehlern. Es kann aber auch vorkommen, dass der Update Befehl die vormals manuell eingespielten Dateien nicht aktualisieren kann, weil man die Dateirechte nicht korrigiert hat und der Systembenutzer, unter dem Fhem läuft, keine Schreibrechte mehr auf die Datei hat.


Bitte stellt sicher, dass ihr wirklich die SVN Dateien eingespielt habt und diese auch geladen sind (im Zweifel Fhem neu starten).




Gruß
Julian
Hat meine Arbeit dir geholfen? ⟹ https://paypal.me/pools/c/8gDLrIWrG9

Maintainer:
FHEM-Docker Image, https://github.com/fhem, Astro(Co-Maintainer), ENIGMA2, GEOFANCY, GUEST, HP1000, Installer, LaMetric2, MSG, msgConfig, npmjs, PET, PHTV, Pushover, RESIDENTS, ROOMMATE, search, THINKINGCLEANER

Loredo

Zitat von: AmunRe am 25 Mai 2016, 17:24:33
habe ich nicht. Er erkennt Ihn ja auch unter presence. und danach hat er Ihn ja auch immer, wenn ich einmal manuell eingeschaltet habe, bleibt er erkannt und ist vortan immer auch über netzwerk einschaltbar.


Es klingt trotzdem nach einer Einstellung im Receiver (oder ein Bug in der Firmware o.ä.). Aus Modulsicht wird die Verbindung permanent gehalten, bis das Gerät im Netzwerk nicht mehr erreichbar ist. Danach wird alle 90 Sekunden versucht sich wieder zu verbinden. Das klappt bei mir soweit prima (auch wenn die Logmeldungen, die von Fhem's IODev erzeugt werden, leider nicht unterdrückbar sind).
Hat meine Arbeit dir geholfen? ⟹ https://paypal.me/pools/c/8gDLrIWrG9

Maintainer:
FHEM-Docker Image, https://github.com/fhem, Astro(Co-Maintainer), ENIGMA2, GEOFANCY, GUEST, HP1000, Installer, LaMetric2, MSG, msgConfig, npmjs, PET, PHTV, Pushover, RESIDENTS, ROOMMATE, search, THINKINGCLEANER

1of16

Zitat von: Loredo am 26 Mai 2016, 10:50:19

Falscher Auszug bzw falsch gekürzt. das Internal ZONE zeigt die gesteuerte Zone an, nicht die Gesamtzahl.
Die Gesamtzahl steht im Hash {helper}{receiver} mit drin, also viel weiter unten:

Dabei kann man nur die Zonen verwenden, bei denen value=1 gesetzt ist. Andere lassen sich nicht ansteuern, falls es noch weitere geben sollte.
ah, jetzt sehe ich das auch. In meinem vorheringen Post habe ich den kompletten list angehangen (https://forum.fhem.de/index.php/topic,15024.msg454438.html#msg454438)
Da wird auch nur eine Zone gelistet, aber das kann ja nicht sein.

Weiterhin habe ich die Daten _nicht_ aus dem Forum sondern _alle_ über die "offizielle" Update Funktion bezogen.
ls -al *ONKYO*
-rw-r--r-- 1 fhem fhem  93908 May 25 08:27 70_ONKYO_AVR.pm
-rw-r--r-- 1 fhem fhem  44163 May 25 08:27 71_ONKYO_AVR_ZONE.pm
-rw-r--r-- 1 fhem fhem 268485 May 23 19:53 ONKYOdb.pm

Die Dateien sind alle aktuell. Die Benutzerrechte sind korrrekt.

Daher weiß ich einfach nicht, was ich verkehrt gemacht haben sollte. Denn mit dem alten Modul konnte ich beide Zonen getrennt ansprechen.
Und mein TX-NR515 (http://www.de.onkyo.com/de/produkte/tx-nr515-76084.html?tab=Details) hat zwei Zonen:
ZitatEndstufengestützte Zone 2 und Zone 2 Line-Out für die Wiedergabe in einem anderen Hörraum

Gibt es, abgesehen von einem Downgrade auf das alte Modul, sonst noch Sachen die ich ausprobieren kann?

Grüße
Philip
FHEM in einem Dockercontainer
VCCU mit 3x HM-MOD-UART und 1x HmLGW
1x CCU2
2x nanoCUL 433MHz, 3x RPi3, Unifi-Controller mit drei APs für presence und Unifi Protec
div. weitere HM, ein paar HmIP Geräte und div. Shellys

Andy89

Servus,
seit dem Update geht mein Onyko irgendwie nicht mehr. Hier ein List auf mein device:
Internals:
   CHANGED
   DEF        192.168.2.4
   DeviceName 192.168.2.4:60128
   FD         17
   INPUT
   NAME       AVR
   NR         1255
   NTFY_ORDER 50-AVR
   PARTIAL
   PROTOCOLVERSION 2013
   SCREENLAYER 0
   STATE      off
   TYPE       ONKYO_AVR
   ZONE       1
   Readings:
     2016-05-26 13:10:01   _
     2016-05-26 13:16:13   presence        present
     2016-05-26 13:16:13   state           opened
     2016-05-26 13:10:01   stateAV         off
   Helper:
     nextConnectionCheck 1464261942.0887
     Receiver:
       Device:
         Netservicelist:
         Selectorlist:
         Zonelist:
           Zone:
             1:
               name       Main
               value      1
Attributes:
   DbLogExclude .*
   cmdIcon    muteT:rc_MUTE previous:rc_PREVIOUS next:rc_NEXT play:rc_PLAY pause:rc_PAUSE stop:rc_STOP shuffleT:rc_SHUFFLE repeatT:rc_REPEAT
   devStateIcon on:rc_GREEN@green:off off:rc_STOP:on absent:rc_RED playing:rc_PLAY@green:pause paused:rc_PAUSE@green:play muted:rc_MUTE@green:muteT fast-rewind:rc_REW@green:play fast-forward:rc_FF@green:play interrupted:rc_PAUSE@yellow:play
   stateFormat stateAV
   verbose    5
   webCmd     volume:muteT:input:previous:next


sobald ich ein "get AVR statusRequest" durchführe stürzt mein fhem ab. Beim Ausführen des Befehls steht dabei im Event Monitor mit verbose 5 folgendes: [siehe EventMonitor-Eintrag.txt Anhang, da echt ewig lang]

Zur gleichen Zeit des Absturzes steht folgedes im log: [siehe log-Eintrag.txt Anhang, da echt ewig lang]

Fehlt mir irgendetwas oder mache ich etwas falsch?
Danke schon einmal!

Beste Grüße
Andy
FHEM 6.0 auf rPi4 docker (mit Alexa & Siri); dbLog, FTUI, Sonos, XiaomiMapCreator auf rPi4 docker;
raspimatic auf rPi3+ > diverse Aktoren und Sensoren;
LGW > (PCA301),EC3000,LaCrosse; MQTT2 > WLAN-Steckdosen,Xiaomi Map;
Harmony Hub;Sonos;Onkyo AVR;RGB WLAN Controller;Netatmo;Withings;Unifi;AMAD

Loredo

Zitat von: 1of16 am 26 Mai 2016, 12:35:16
Und mein TX-NR515 (http://www.de.onkyo.com/de/produkte/tx-nr515-76084.html?tab=Details) hat zwei Zonen:
Gibt es, abgesehen von einem Downgrade auf das alte Modul, sonst noch Sachen die ich ausprobieren kann?


Hm, schickt dein Receiver denn auf einen "get statusRequest" keine XML-Konfiguration zurück (im Logfile zu erkennen am remoteCommand-Befehl net-receiver-information bzw. NRIQSTN)? Das würde erklären, weshalb du bei einem "list avr" den Hash {helper}{receiver} nicht hast. Die Modelle ab 2013 scheinen jedenfalls alle eine XML Konfiguration schicken zu können. Ohne diese wird die der get-Befehl zum anlegen der Zone zwar nicht angeboten, du kannst sie aber manuell natürlich trotzdem mal anlegen und schauen was dann passiert:



define avr_z2 ONKYO_AVR_ZONE 2


Hat meine Arbeit dir geholfen? ⟹ https://paypal.me/pools/c/8gDLrIWrG9

Maintainer:
FHEM-Docker Image, https://github.com/fhem, Astro(Co-Maintainer), ENIGMA2, GEOFANCY, GUEST, HP1000, Installer, LaMetric2, MSG, msgConfig, npmjs, PET, PHTV, Pushover, RESIDENTS, ROOMMATE, search, THINKINGCLEANER

Loredo

#414
Zitat von: Andy89 am 26 Mai 2016, 13:44:49
Zur gleichen Zeit des Absturzes steht folgedes im log: [siehe log-Eintrag.txt Anhang, da echt ewig lang]

Fehlt mir irgendetwas oder mache ich etwas falsch?


Zitat

2016.05.26 13:28:37 1: BlockingInformParent (PRESENCE_ProcessLocalScan): Can't connect to localhost:7073: IO::Socket::INET: connect: Connection refused
2016.05.26 13:28:43 1: BlockingInformParent (PRESENCE_ProcessLocalScan): Can't connect to localhost:7073: IO::Socket::INET: connect: Connection refused



Es liest sich so, als wenn die IODev Funktion von Fhem keine interne Telnet-Verbindung zurück in Fhem aufbauen kann. Hast du kein telnetPort-Device mehr oder ist es mit "allow" irgendwie geschützt? Fhem intern sollte man immer ein frei zugängliches telnetPort-Device haben.


Die andere Meldung ist eigentlich nur ein Hinweis und führt eigentlich nicht zu einem Absturz (Onkyo hat manchmal einige Einträge doppelt drin und das ist eigentlich ein Firmware Bug).

Hat meine Arbeit dir geholfen? ⟹ https://paypal.me/pools/c/8gDLrIWrG9

Maintainer:
FHEM-Docker Image, https://github.com/fhem, Astro(Co-Maintainer), ENIGMA2, GEOFANCY, GUEST, HP1000, Installer, LaMetric2, MSG, msgConfig, npmjs, PET, PHTV, Pushover, RESIDENTS, ROOMMATE, search, THINKINGCLEANER

Andy89

#415
Zitat von: Loredo am 26 Mai 2016, 14:33:10
Es liest sich so, als wenn die IODev Funktion von Fhem keine interne Telnet-Verbindung zurück in Fhem aufbauen kann. Hast du kein telnetPort-Device mehr oder ist es mit "allow" irgendwie geschützt? Fhem intern sollte man immer ein frei zugängliches telnetPort-Device haben.
hmm. doch habe ich. Sonst waren die Probleme ja auch nicht da. Fhem läuft auf dem raspberry3 nun schon seit paar Wochen.. ich werde mal bisschen googlen. Danke schon einmal!

edit: ok es wird wohl was mit dem allow zu tun haben.... "telnetPort has no associated allowed device with password/globalpassword."... Ich hab zwei FHEMWEB. Eins mit passwort (für außen mit Portweiterleitung) und eins ohne..
FHEM 6.0 auf rPi4 docker (mit Alexa & Siri); dbLog, FTUI, Sonos, XiaomiMapCreator auf rPi4 docker;
raspimatic auf rPi3+ > diverse Aktoren und Sensoren;
LGW > (PCA301),EC3000,LaCrosse; MQTT2 > WLAN-Steckdosen,Xiaomi Map;
Harmony Hub;Sonos;Onkyo AVR;RGB WLAN Controller;Netatmo;Withings;Unifi;AMAD

rapster

Onkyo mal nicht erreichbar = geflutetes Logfile, war in der alten Version nicht der Fall.....



2016.05.26 15:58:41.789 2: dg_wz_avr_main: second attempt to read timed out, this is an unrecoverable error.
2016.05.26 15:58:41.788 3: Can't connect to 192.168.1.100:60128: No route to host
2016.05.26 15:58:38.788 3: Opening dg_wz_avr_main device 192.168.1.100:60128
2016.05.26 15:58:38.788 2: dg_wz_avr_main: first attempt to read timed out, trying to close and open the device.
2016.05.26 15:57:08.769 2: dg_wz_avr_main: second attempt to read timed out, this is an unrecoverable error.
2016.05.26 15:57:08.768 3: Can't connect to 192.168.1.100:60128: No route to host
2016.05.26 15:57:05.769 3: Opening dg_wz_avr_main device 192.168.1.100:60128
2016.05.26 15:57:05.768 2: dg_wz_avr_main: first attempt to read timed out, trying to close and open the device.
2016.05.26 15:55:35.749 2: dg_wz_avr_main: second attempt to read timed out, this is an unrecoverable error.
2016.05.26 15:55:35.748 3: Can't connect to 192.168.1.100:60128: No route to host
2016.05.26 15:55:32.751 3: Opening dg_wz_avr_main device 192.168.1.100:60128
2016.05.26 15:55:32.751 2: dg_wz_avr_main: first attempt to read timed out, trying to close and open the device.
2016.05.26 15:54:02.733 2: dg_wz_avr_main: second attempt to read timed out, this is an unrecoverable error.
2016.05.26 15:54:02.732 3: Can't connect to 192.168.1.100:60128: No route to host
2016.05.26 15:53:59.732 3: Opening dg_wz_avr_main device 192.168.1.100:60128
2016.05.26 15:53:59.732 2: dg_wz_avr_main: first attempt to read timed out, trying to close and open the device.
2016.05.26 15:52:29.713 2: dg_wz_avr_main: second attempt to read timed out, this is an unrecoverable error.
2016.05.26 15:52:29.712 3: Can't connect to 192.168.1.100:60128: No route to host
2016.05.26 15:52:26.714 3: Opening dg_wz_avr_main device 192.168.1.100:60128
2016.05.26 15:52:26.714 2: dg_wz_avr_main: first attempt to read timed out, trying to close and open the device.
2016.05.26 15:50:56.697 2: dg_wz_avr_main: second attempt to read timed out, this is an unrecoverable error.
2016.05.26 15:50:56.696 3: Can't connect to 192.168.1.100:60128: No route to host
2016.05.26 15:50:53.696 3: Opening dg_wz_avr_main device 192.168.1.100:60128
2016.05.26 15:50:53.696 2: dg_wz_avr_main: first attempt to read timed out, trying to close and open the device.
2016.05.26 15:49:23.677 2: dg_wz_avr_main: second attempt to read timed out, this is an unrecoverable error.
2016.05.26 15:49:23.676 3: Can't connect to 192.168.1.100:60128: No route to host
2016.05.26 15:49:20.679 3: Opening dg_wz_avr_main device 192.168.1.100:60128
2016.05.26 15:49:20.679 2: dg_wz_avr_main: first attempt to read timed out, trying to close and open the device.
2016.05.26 15:47:50.661 2: dg_wz_avr_main: second attempt to read timed out, this is an unrecoverable error.
2016.05.26 15:47:50.660 3: Can't connect to 192.168.1.100:60128: No route to host
2016.05.26 15:47:47.663 3: Opening dg_wz_avr_main device 192.168.1.100:60128
2016.05.26 15:47:47.663 2: dg_wz_avr_main: first attempt to read timed out, trying to close and open the device.

1of16

Zitat von: Loredo am 26 Mai 2016, 13:56:39

Hm, schickt dein Receiver denn auf einen "get statusRequest" keine XML-Konfiguration zurück (im Logfile zu erkennen am remoteCommand-Befehl net-receiver-information bzw. NRIQSTN)? Das würde erklären, weshalb du bei einem "list avr" den Hash {helper}{receiver} nicht hast. Die Modelle ab 2013 scheinen jedenfalls alle eine XML Konfiguration schicken zu können. Ohne diese wird die der get-Befehl zum anlegen der Zone zwar nicht angeboten, du kannst sie aber manuell natürlich trotzdem mal anlegen und schauen was dann passiert:



define avr_z2 ONKYO_AVR_ZONE 2

Scheinbar kommt auf "get statusRequest" eine Antwort, wie du sie erwarten magst:
2016.05.26 19:20:48.427 3: ONKYO_AVR get avr statusRequest
2016.05.26 19:20:48.428 5: ONKYO_AVR avr: called function ONKYO_AVR_SendCommand()
2016.05.26 19:20:48.428 4: ONKYO_AVR avr: snd net-receiver-information -> query (NRIQSTN)
2016.05.26 19:20:48.429 5: ONKYO_AVR avr: 192.168.1.97:60128 snd ISCP
!1NRIQSTN
2016.05.26 19:20:48.429 5: SW: 49534350000000100000000a0100000021314e52495153544e0d


ich muss leider zugeben, dass ich bis zuletzt die zweite Zone via define avr_z2 ONKYO_AVR_ZONE 192.168.1.97 2 versucht hatte hinzuzufügen. Das war doof, merk ich selber ;)
Aber auch ohne die IP sieht es zwar etwas besser aus, die Zone zwei reagiert immer nocht nicht:
list avr_z2
Internals:
   CFGFN
   CHANGED
   DEF        2
   INPUT
   IODev      avr
   LASTInputDev avr
   MSGCNT     1
   NAME       avr_z2
   NR         14363
   STATE      absent
   TYPE       ONKYO_AVR_ZONE
   ZONE       2
   avr_MSGCNT 1
   avr_TIME   2016-05-26 19:19:42
   Helper:
     Dblog:
       Currenttrackduration:
         Logdb:
           TIME       1464283182.19042
           VALUE      --:--
       Currenttrackposition:
         Logdb:
           TIME       1464283182.19042
           VALUE      --:--
       Playstatus:
         Logdb:
           TIME       1464283182.19042
           VALUE      stopped
       Repeat:
         Logdb:
           TIME       1464283182.19042
           VALUE      off
       Shuffle:
         Logdb:
           TIME       1464283182.19042
           VALUE      off
       State:
         Logdb:
           TIME       1464283182.19042
           VALUE      currentTitle:
       Stateav:
         Logdb:
           TIME       1464283182.19042
           VALUE      absent
   Readings:
     2016-05-26 19:19:42   currentAlbum
     2016-05-26 19:19:42   currentArtist
     2016-05-26 19:19:42   currentTitle
     2016-05-26 19:19:42   currentTrackDuration --:--
     2016-05-26 19:19:42   currentTrackPosition --:--
     2016-05-26 19:19:42   playStatus      stopped
     2016-05-26 19:19:42   repeat          off
     2016-05-26 19:19:42   shuffle         off
     2016-05-26 19:19:42   stateAV         absent
   Helper:
     Receiver:
       Input_names:
Attributes:
   IODev      avr
   cmdIcon    muteT:rc_MUTE previous:rc_PREVIOUS next:rc_NEXT play:rc_PLAY pause:rc_PAUSE stop:rc_STOP shuffleT:rc_SHUFFLE repeatT:rc_REPEAT
   devStateIcon on:rc_GREEN@green:off off:rc_STOP:on absent:rc_RED playing:rc_PLAY@green:pause paused:rc_PAUSE@green:play muted:rc_MUTE@green:muteT fast-rewind:rc_REW@green:play fast-forward:rc_FF@green:play interrupted:rc_PAUSE@yellow:play
   model      pre2013
   room       Wohnzimmer
   stateFormat stateAV
   verbose    5
   webCmd     volume:muteT:input:previous:next


Weiterhin kommen, wenn ich z.B. per FB die zweite Zone anschalte und die Lautstärke ändere, die Fail-Meldungen:
2016.05.26 19:19:59.549 5: ONKYO_AVR avr: raw 49534350000000100000000a0100000021315a505730311a0d0a ISCP............!1ZPW01...
2016.05.26 19:19:59.553 4: ONKYO_AVR avr: con _ZPW(ZPW01): FAIL: Don't know how to convert, not in ONKYOdb: ZPW01
2016.05.26 19:19:59.554 4: ONKYO_AVR avr: rcv _ZPW = 01
2016.05.26 19:19:59.605 5: ONKYO_AVR avr: called function ONKYO_AVR_Set()
2016.05.26 19:19:59.612 5: ONKYO_AVR avr: called function ONKYO_AVR_Set()
2016.05.26 19:19:59.667 5: ONKYO_AVR avr: raw 49534350000000100000000a0100000021315a4d5430301a0d0a ISCP............!1ZMT00...
2016.05.26 19:19:59.669 4: ONKYO_AVR avr: con _ZMT(ZMT00): FAIL: Don't know how to convert, not in ONKYOdb: ZMT00
2016.05.26 19:19:59.670 4: ONKYO_AVR avr: rcv _ZMT = 00
2016.05.26 19:19:59.770 5: ONKYO_AVR avr: raw 49534350000000100000000a0100000021315a564c30381a0d0a ISCP............!1ZVL08...
2016.05.26 19:19:59.773 4: ONKYO_AVR avr: con _ZVL(ZVL08): FAIL: Don't know how to convert, not in ONKYOdb: ZVL08
2016.05.26 19:19:59.774 4: ONKYO_AVR avr: rcv _ZVL = 08
2016.05.26 19:19:59.794 5: ONKYO_AVR avr: called function ONKYO_AVR_Set()
2016.05.26 19:19:59.799 5: ONKYO_AVR avr: called function ONKYO_AVR_Set()
2016.05.26 19:19:59.956 5: ONKYO_AVR avr: raw 49534350000000100000000d01000000213154555a30303532321a0d0a ISCP............!1TUZ00522...
2016.05.26 19:19:59.958 4: ONKYO_AVR avr: con _TUZ(TUZ00522): FAIL: Don't know how to convert, not in ONKYOdb: TUZ00522
2016.05.26 19:19:59.960 4: ONKYO_AVR avr: rcv _TUZ = 00522
2016.05.26 19:19:59.979 5: ONKYO_AVR avr: called function ONKYO_AVR_Set()
2016.05.26 19:19:59.985 5: ONKYO_AVR avr: called function ONKYO_AVR_Set()
2016.05.26 19:20:00.077 5: ONKYO_AVR avr: raw 49534350000000100000000a01000000213150525a30301a0d0a ISCP............!1PRZ00...
2016.05.26 19:20:00.079 4: ONKYO_AVR avr: con _PRZ(PRZ00): FAIL: Don't know how to convert, not in ONKYOdb: PRZ00
2016.05.26 19:20:00.080 4: ONKYO_AVR avr: rcv _PRZ = 00
2016.05.26 19:20:25.844 5: ONKYO_AVR avr: raw 49534350000000100000000a0100000021315a564c30391a0d0a ISCP............!1ZVL09...
2016.05.26 19:20:25.847 4: ONKYO_AVR avr: con _ZVL(ZVL09): FAIL: Don't know how to convert, not in ONKYOdb: ZVL09
2016.05.26 19:20:25.848 4: ONKYO_AVR avr: rcv _ZVL = 09


zur Vollständigkeit halber hier auch der list avr:
Internals:
   CFGFN
   CHANNEL    F3
   DEF        192.168.1.97 pre2013
   DeviceName 192.168.1.97:60128
   FD         87
   INPUT      05
   NAME       avr
   NR         433
   NTFY_ORDER 50-avr
   PARTIAL
   PROTOCOLVERSION pre2013
   SCREENLAYER 0
   STATE      on
   TYPE       ONKYO_AVR
   ZONE       1
   Helper:
     Dblog:
       _nsb:
         Logdb:
           TIME       1464195596.79273
           VALUE      ON
       _prz:
         Logdb:
           TIME       1464195694.55608
           VALUE      00
       _slz:
         Logdb:
           TIME       1464195758.81864
           VALUE      05
       _tuz:
         Logdb:
           TIME       1464283199.96392
           VALUE      00522
       _zmt:
         Logdb:
           TIME       1464195694.0658
           VALUE      00
       _zpw:
         Logdb:
           TIME       1464283199.55918
           VALUE      01
       _zvl:
         Logdb:
           TIME       1464283225.85298
           VALUE      09
       Audin_ch:
         Logdb:
           TIME       1464195598.10335
           VALUE      2
       Audin_enc:
         Logdb:
           TIME       1464195598.10335
           VALUE      Multich PCM
       Audin_srate:
         Logdb:
           TIME       1464195598.10335
           VALUE      2
       Audin_src:
         Logdb:
           TIME       1464283183.39866
           VALUE      Analog
       Audout_ch:
         Logdb:
           TIME       1464195598.10335
           VALUE      2
       Audout_mode:
         Logdb:
           TIME       1464283183.39866
           VALUE      All Ch Stereo
       Center-temporary-level:
         Logdb:
           TIME       1464195597.48079
           VALUE      +1
       Currenttrackduration:
         Logdb:
           TIME       1464195597.08462
           VALUE      --:--
       Currenttrackposition:
         Logdb:
           TIME       1464195597.08462
           VALUE      --:--
       Input:
         Logdb:
           TIME       1464278420.41736
           VALUE      video6
       Ipod-mode-change:
         Logdb:
           TIME       1464195596.89721
           VALUE      OFF
       Listening-mode:
         Logdb:
           TIME       1464278420.24137
           VALUE      all-ch-stereo
       Music-optimizer:
         Logdb:
           TIME       1464283183.08118
           VALUE      on
       Mute:
         Logdb:
           TIME       1464195597.25267
           VALUE      off
       Playstatus:
         Logdb:
           TIME       1464195597.08462
           VALUE      stopped
       Power:
         Logdb:
           TIME       1464278419.51861
           VALUE      on
       Presence:
         Logdb:
           TIME       1464264588.24514
           VALUE      present
       Preset:
         Logdb:
           TIME       1464195597.79575
           VALUE      00
       Repeat:
         Logdb:
           TIME       1464195597.08462
           VALUE      off
       Screencurser:
         Logdb:
           TIME       1464195758.71865
           VALUE      -
       Screeniconleft:
         Logdb:
           TIME       1464195621.52492
           VALUE      00
       Screeniconright:
         Logdb:
           TIME       1464195621.52492
           VALUE      00
       Screenitemc0001:
         Logdb:
           TIME       1464195622.68495
           VALUE      Last.fm Internet Radio
       Screenitemc0002:
         Logdb:
           TIME       1464195621.76777
           VALUE      Spotify
       Screenitemc0003:
         Logdb:
           TIME       1464195621.85549
           VALUE      AUPEO! PERSONAL RADIO
       Screenitemc0004:
         Logdb:
           TIME       1464195621.95903
           VALUE      simfy
       Screenitemc0005:
         Logdb:
           TIME       1464195622.06104
           VALUE      MP3tunes
       Screenitemc0006:
         Logdb:
           TIME       1464195622.16351
           VALUE      My Favorites
       Screenitemc0007:
         Logdb:
           TIME       1464195622.2636
           VALUE      Home Media
       Screenitemc0008:
         Logdb:
           TIME       1464195622.3788
           VALUE      DLNA
       Screenitemcnt:
         Logdb:
           TIME       1464195621.52492
           VALUE      0000
       Screenlayer:
         Logdb:
           TIME       1464195621.52492
           VALUE      00
       Screenlayerinfo:
         Logdb:
           TIME       1464198811.78395
           VALUE      0
       Screenlistpos:
         Logdb:
           TIME       1464198811.78395
           VALUE      0000
       Screentype:
         Logdb:
           TIME       1464195621.52492
           VALUE      0
       Shuffle:
         Logdb:
           TIME       1464195597.08462
           VALUE      off
       State:
         Logdb:
           TIME       1464283183.39866
           VALUE      audin_ch:
       Stateav:
         Logdb:
           TIME       1464278419.51861
           VALUE      on
       Subwoofer-temporary-level:
         Logdb:
           TIME       1464195597.58567
           VALUE      +6
       Tone-front:
         Logdb:
           TIME       1464195597.37007
           VALUE      B00T00
       Tuning:
         Logdb:
           TIME       1464195597.69508
           VALUE      00522
       Volume:
         Logdb:
           TIME       1464278421.74274
           VALUE      10
   Readings:
     2016-05-25 18:59:56   _NSB            ON
     2016-05-25 19:01:34   _PRZ            00
     2016-05-25 19:02:38   _SLZ            05
     2016-05-26 19:19:59   _TUZ            00522
     2016-05-25 19:01:34   _ZMT            00
     2016-05-26 19:19:59   _ZPW            01
     2016-05-26 19:20:25   _ZVL            09
     2016-05-26 19:19:43   audin_ch
     2016-05-26 19:19:43   audin_enc
     2016-05-26 19:19:43   audin_srate
     2016-05-26 19:19:43   audin_src       Analog
     2016-05-25 18:59:58   audout_ch       2
     2016-05-26 19:19:43   audout_mode     All Ch Stereo
     2016-05-25 18:59:57   center-temporary-level +1
     2016-05-25 19:00:21   channel
     2016-05-25 18:59:57   currentAlbum
     2016-05-25 18:59:57   currentArtist
     2016-05-25 18:59:57   currentTitle
     2016-05-25 18:59:57   currentTrackDuration --:--
     2016-05-25 18:59:57   currentTrackPosition --:--
     2016-05-26 18:00:20   input           video6
     2016-05-25 18:59:56   ipod-mode-change OFF
     2016-05-26 18:00:20   listening-mode  all-ch-stereo
     2016-05-26 19:19:43   music-optimizer on
     2016-05-25 18:59:57   mute            off
     2016-05-25 18:59:57   playStatus      stopped
     2016-05-26 18:00:19   power           on
     2016-05-26 14:09:48   presence        present
     2016-05-25 18:59:57   preset          00
     2016-05-25 18:59:57   repeat          off
     2016-05-25 19:02:38   screenCurser    -
     2016-05-25 19:00:21   screenIconLeft  00
     2016-05-25 19:00:21   screenIconRight 00
     2016-05-25 19:00:22   screenItemC0001 Last.fm Internet Radio
     2016-05-25 19:00:21   screenItemC0002 Spotify
     2016-05-25 19:00:21   screenItemC0003 AUPEO! PERSONAL RADIO
     2016-05-25 19:00:21   screenItemC0004 simfy
     2016-05-25 19:00:22   screenItemC0005 MP3tunes
     2016-05-25 19:00:22   screenItemC0006 My Favorites
     2016-05-25 19:00:22   screenItemC0007 Home Media
     2016-05-25 19:00:22   screenItemC0008 DLNA
     2016-05-25 19:00:21   screenItemCnt   0000
     2016-05-25 19:00:21   screenLayer     00
     2016-05-25 19:53:31   screenLayerInfo 0
     2016-05-25 19:53:31   screenListPos   0000
     2016-05-25 19:00:21   screenStatus
     2016-05-25 19:00:21   screenTitle
     2016-05-25 19:00:21   screenType      0
     2016-05-25 18:59:57   shuffle         off
     2016-05-26 14:09:48   state           opened
     2016-05-26 18:00:19   stateAV         on
     2016-05-25 18:59:57   subwoofer-temporary-level +6
     2016-05-25 18:59:57   tone-front      B00T00
     2016-05-25 18:59:57   tuning          00522
     2016-05-26 18:00:21   volume          10
   Screen:
     0:
       List:
         0000:
           curser     0
           listpos    1
         0001:
           curser     0
           data       Last.fm Internet Radio
           listpos    0
           property   -
         0002:
           curser     0
           data       Spotify
           listpos    0
           property   -
         0003:
           curser     0
           data       AUPEO! PERSONAL RADIO
           listpos    0
           property   -
         0004:
           curser     0
           data       simfy
           listpos    0
           property   -
         0005:
           curser     0
           data       MP3tunes
           listpos    0
           property   -
         0006:
           curser     0
           data       My Favorites
           listpos    0
           property   -
         0007:
           curser     0
           data       Home Media
           listpos    0
           property   -
         0008:
           curser     0
           data       DLNA
           listpos    0
           property   -
   Helper:
     nextConnectionCheck 1464283617.87859
     Receiver:
       Device:
         Netservicelist:
           Netservice:
             F3:
         Selectorlist:
         Zonelist:
           Zone:
             1:
               name       Main
               value      1
       Input:
       Input_aliases:
       Input_names:
Attributes:
   cmdIcon    muteT:rc_MUTE previous:rc_PREVIOUS next:rc_NEXT play:rc_PLAY pause:rc_PAUSE stop:rc_STOP shuffleT:rc_SHUFFLE repeatT:rc_REPEAT
   devStateIcon on:rc_GREEN@green:off off:rc_STOP:on absent:rc_RED playing:rc_PLAY@green:pause paused:rc_PAUSE@green:play muted:rc_MUTE@green:muteT fast-rewind:rc_REW@green:play fast-forward:rc_FF@green:play interrupted:rc_PAUSE@yellow:play
   model      pre2013
   room       Wohnzimmer
   stateFormat stateAV
   verbose    5
   webCmd     volume:muteT:input:previous:next
FHEM in einem Dockercontainer
VCCU mit 3x HM-MOD-UART und 1x HmLGW
1x CCU2
2x nanoCUL 433MHz, 3x RPi3, Unifi-Controller mit drei APs für presence und Unifi Protec
div. weitere HM, ein paar HmIP Geräte und div. Shellys

Loredo

#418
Zitat von: rapster am 26 Mai 2016, 16:01:33
Onkyo mal nicht erreichbar = geflutetes Logfile, war in der alten Version nicht der Fall.....


Da wurde auch nicht Fhem's IODev verwendet.
Dieses Log wird in DevIO.pm erzeugt. Um das abzustellen braucht's eine Änderung von Rudi als Owner des Files (höhere Logschwelle).
Hat meine Arbeit dir geholfen? ⟹ https://paypal.me/pools/c/8gDLrIWrG9

Maintainer:
FHEM-Docker Image, https://github.com/fhem, Astro(Co-Maintainer), ENIGMA2, GEOFANCY, GUEST, HP1000, Installer, LaMetric2, MSG, msgConfig, npmjs, PET, PHTV, Pushover, RESIDENTS, ROOMMATE, search, THINKINGCLEANER

Loredo

#419
Zitat von: 1of16 am 26 Mai 2016, 19:27:14
Scheinbar kommt auf "get statusRequest" eine Antwort, wie du sie erwarten magst:

Du meinst sicher, dass dort keine Antwort kommt ;)
Was du dort siehst ist das was verschickt wurde (=snd), wenn eine Antwort kommt steht dort "rcv".
Hat meine Arbeit dir geholfen? ⟹ https://paypal.me/pools/c/8gDLrIWrG9

Maintainer:
FHEM-Docker Image, https://github.com/fhem, Astro(Co-Maintainer), ENIGMA2, GEOFANCY, GUEST, HP1000, Installer, LaMetric2, MSG, msgConfig, npmjs, PET, PHTV, Pushover, RESIDENTS, ROOMMATE, search, THINKINGCLEANER