Autor Thema: Opus TX300/Imagintronix Soil sensor  (Gelesen 3834 mal)

Offline amigob

  • New Member
  • *
  • Beiträge: 19
Opus TX300/Imagintronix Soil sensor
« am: 19 Juli 2014, 16:44:34 »
Hi all

I just got my Soil Sensor and see in the RFXmanager that my FRXtrx supports the sensor. but now I also want to add them to fhem. What is the best way to add these.
Below you see 2 of the 3 sensors that I have.

0A520C040001012C620359
Packettype    = TEMP_HUM
subtype       = TH12 - Imagintronix
                channel 1
Sequence nbr  = 4
ID            = 1
Temperature   = 30 °C
Humidity      = 98
Status        = Wet
Signal level  = 5
Battery       = OK

0A520C060002015E050259
Packettype    = TEMP_HUM
subtype       = TH12 - Imagintronix
                channel 2
Sequence nbr  = 6
ID            = 2
Temperature   = 35 °C
Humidity      = 5
Status        = Dry
Signal level  = 5
Battery       = OK


Offline amigob

  • New Member
  • *
  • Beiträge: 19
Antw:Opus TX300/Imagintronix Soil sensor
« Antwort #1 am: 20 Juli 2014, 11:45:36 »
got it working now, adding one line to 46_TRX_WEATHER.pm will give support for these new sensors :-) ( humidity, temperature, battery status )
add
0x0c => "OPUS_TX300",
to
my %devname =
list, in the
sub TRX_WEATHER_common_temphydro
function

amigob

Offline unimatrix

  • Developer
  • Full Member
  • ****
  • Beiträge: 416
Antw:Opus TX300/Imagintronix Soil sensor
« Antwort #2 am: 22 Juli 2014, 12:12:35 »
Hi,

could you tell me where you purchased this sensor? I am also interested.

Thanks!

Offline schka17

  • Sr. Member
  • ****
  • Beiträge: 860
Antw:Opus TX300/Imagintronix Soil sensor
« Antwort #3 am: 22 Juli 2014, 17:25:34 »
Hi,

Just ordered some here: http://www.plantcaretools.com/

Regards, karl


Sent from my iPad using Tapatalk
M: Thinclient x64 Debian | CUL FS20, HMS100WD, HMS100TF, HMS100T, HMS100CO, S300, S555TH | OWServer DS1420, DS18B20, DS2408 | RFXCOM UVN128, THWR800, THGR228N,RTGR328, PCR800 |Jeelink PCA301 EC3000|CUNO+IR|HMLAN|HMUSB|CUL433 Somfy|mySensors|espEasy
S1:Raspberry mit BPM810, Jeelink EC3000

Offline schka17

  • Sr. Member
  • ****
  • Beiträge: 860
Antw:Opus TX300/Imagintronix Soil sensor
« Antwort #4 am: 28 Juli 2014, 11:27:55 »
Hi

Sensor received, just activated the first one, working perfect. But it seems that there are just 3 sensors possible because of the address jumpers 1-3?

regards,

Karl
M: Thinclient x64 Debian | CUL FS20, HMS100WD, HMS100TF, HMS100T, HMS100CO, S300, S555TH | OWServer DS1420, DS18B20, DS2408 | RFXCOM UVN128, THWR800, THGR228N,RTGR328, PCR800 |Jeelink PCA301 EC3000|CUNO+IR|HMLAN|HMUSB|CUL433 Somfy|mySensors|espEasy
S1:Raspberry mit BPM810, Jeelink EC3000

Offline Tobias

  • Developer
  • Hero Member
  • ****
  • Beiträge: 3667
Antw:Opus TX300/Imagintronix Soil sensor
« Antwort #5 am: 28 Juli 2014, 14:33:47 »
Hey,
it´s very good!!! One sensor for only 8€!! I think i´m buying some sensors...
FHEM auf ASRock J3455-ITX im 19" Rack mit Homematic, MAX, PCA301, Panstamp-Sensoren, RPi mit 2x 1wire, RPi mit Text2Speech.
Maintainer der Module: DbLog, Text2Speech, TrashCal, MediaList
Meine Projekte auf https://github.com/tobiasfaust

Offline Willi

  • Sr. Member
  • ****
  • Beiträge: 594
Antw:Opus TX300/Imagintronix Soil sensor
« Antwort #6 am: 07 August 2014, 15:20:44 »
Yes, only three sensors are usable with the RFXtrx433 as there is no additional ID in the RF packet to distinguish them.

Regards

Willi
FHEM@Q600(debian) mit DS9490R (1Wire) | FHEM@Sheevaplug(debian) mit RFXCOM-Receiver(80002), CULv3 & USB-WDE1 | FHEM@odroid mit CULv2 & RFXtrx433

 

decade-submarginal