Opus TX300/Imagintronix Soil sensor

Begonnen von amigob, 19 Juli 2014, 16:44:34

Vorheriges Thema - Nächstes Thema

amigob

Hi all

I just got my Soil Sensor and see in the RFXmanager that my FRXtrx supports the sensor. but now I also want to add them to fhem. What is the best way to add these.
Below you see 2 of the 3 sensors that I have.

0A520C040001012C620359
Packettype    = TEMP_HUM
subtype       = TH12 - Imagintronix
                channel 1
Sequence nbr  = 4
ID            = 1
Temperature   = 30 °C
Humidity      = 98
Status        = Wet
Signal level  = 5
Battery       = OK

0A520C060002015E050259
Packettype    = TEMP_HUM
subtype       = TH12 - Imagintronix
                channel 2
Sequence nbr  = 6
ID            = 2
Temperature   = 35 °C
Humidity      = 5
Status        = Dry
Signal level  = 5
Battery       = OK


amigob

got it working now, adding one line to 46_TRX_WEATHER.pm will give support for these new sensors :-) ( humidity, temperature, battery status )
add
0x0c => "OPUS_TX300",
to
my %devname =
list, in the
sub TRX_WEATHER_common_temphydro
function

amigob

unimatrix

Hi,

could you tell me where you purchased this sensor? I am also interested.

Thanks!

schka17

Hi,

Just ordered some here: http://www.plantcaretools.com/

Regards, karl


Sent from my iPad using Tapatalk
M: Thinclient x64 Debian | CUL FS20, HMS100WD, HMS100TF, HMS100T, HMS100CO, S300, S555TH | OWServer DS1420, DS18B20, DS2408 | RFXCOM UVN128, THWR800, THGR228N,RTGR328, PCR800 |Jeelink PCA301 EC3000|CUNO+IR|HMLAN|HMUSB|CUL433 Somfy|mySensors|espEasy
S1:Raspberry mit BPM810, Jeelink EC3000

schka17

Hi

Sensor received, just activated the first one, working perfect. But it seems that there are just 3 sensors possible because of the address jumpers 1-3?

regards,

Karl
M: Thinclient x64 Debian | CUL FS20, HMS100WD, HMS100TF, HMS100T, HMS100CO, S300, S555TH | OWServer DS1420, DS18B20, DS2408 | RFXCOM UVN128, THWR800, THGR228N,RTGR328, PCR800 |Jeelink PCA301 EC3000|CUNO+IR|HMLAN|HMUSB|CUL433 Somfy|mySensors|espEasy
S1:Raspberry mit BPM810, Jeelink EC3000

Tobias

Hey,
it´s very good!!! One sensor for only 8€!! I think i´m buying some sensors...
Maintainer: Text2Speech, TrashCal, MediaList

Meine Projekte: https://github.com/tobiasfaust
* PumpControl v2: allround Bewässerungssteuerung mit ESP und FHEM
* Ein Modbus RS485 zu MQTT Gateway für SolarWechselrichter

Willi

Yes, only three sensors are usable with the RFXtrx433 as there is no additional ID in the RF packet to distinguish them.

Regards

Willi
FHEM@Q600(debian) mit DS9490R (1Wire) | FHEM@Sheevaplug(debian) mit RFXCOM-Receiver(80002), CULv3 & USB-WDE1 | FHEM@odroid mit CULv2 & RFXtrx433