Vorstellung FHEM iOS APP

Begonnen von ak0815, 08 Januar 2015, 12:02:50

Vorheriges Thema - Nächstes Thema

ak0815

Das Problem ist in der nächsten Version gefixt.

Danke für die Info.


Gesendet von iPhone mit Tapatalk
FHEM APP für iOS
http://apple.co/1F7gNYu

Wolfgang-23

Hallo,

ich hab folgendes Problem:

Hab die Steckdose vom AVM fritz dect. Jetzt habe ich im App nur den Status der steckdose, also on oder off stehen, kann sie aber nicht schalten und die werte wie temperatur und stromverbrauch wird mir auch nicht angezeigt.

kann mir da jemand weiterhelfen?

gruß Wolfgang

ak0815

Hallo Wolfgang,

kannst du mir die passende json zu dem Gerät schicken?

Gruss
Andy


Gesendet von iPhone mit Tapatalk
FHEM APP für iOS
http://apple.co/1F7gNYu

Wolfgang-23

Hallo,

was meinst du genau?
sorry wenn ich bisschen blöd frage.
was ist ein json?  ::)

MartinMuc

Gib jsonlist2 DEVICENAME Ein, dann bekommst du das was Andy braucht
Cubietruck mit CUL und HM USB

FloZi

Hi,

Ich würde auch gerne mittesten!  ;D 8)

Ich habe:
Fhem auf RasPi, Fritzbox, FB Anrufmonitor, FB Dect 200 (Schalten, Strom und Temp. messen), FS20 Schalter und Steckdosen, intertechno Steckdosen, Homematic Rauchmelder und Heizkörperthermostat (HMLan), PhilipsHUE (Bulb, Stripe,Bloom und LWDimmer), Milight, LW12 LED Controller, XBMC, Philips und Samsung SmartTV
Als Geräte definiert.

Das mit den sortrooms müsste ich noch einrichten, sollt ich aber auch noch hinbekommen...

lG FloZi

Wolfgang-23


FloZi

Oh...des wichtigste hab ich wohl vergessen  :o

iPad Air und iPhone 6

ak0815

Zitat von: FloZi am 11 Januar 2015, 18:26:27
Oh...des wichtigste hab ich wohl vergessen  :o

iPad Air und iPhone 6

Hallo,

schicke mir deine iTunes Email per PN dann lade ich dich ein.

Gruß
Andy
FHEM APP für iOS
http://apple.co/1F7gNYu

ak0815

FHEM APP für iOS
http://apple.co/1F7gNYu

deluxe41

#40
Das kommt bei meiner Avm Steckdose :

Sorry, hab die Zahl vertauscht...


{
  "Arg":"FBDECT_16",
  "Results": [
  {
    "Name":"FBDECT_16",
    "PossibleSets":"msgInterval off on blink toggle on-for-timer on-till off-for-timer intervals off-till",
    "PossibleAttrs":"verbose:0,1,2,3,4,5 room group comment alias eventMap userReadings IODev do_not_notify:1,0 ignore:1,0 dummy:1,0 showtime:1,0 event-on-change-reading event-on-update-reading event-min-interval stateFormat model:Dect200,Powerline546E alarmDevice alarmSettings devStateIcon devStateStyle fp_Heizkoerper fp_Kinderzimmer fp_Wohnzimmer fp_plotsplan fp_test3 fp_test4 fp_test5 icon sortby webCmd widgetOverride userattr",
    "Internals": {
      "CHANGED": "null",
      "DEF": "16 powerMeter,switch",
      "LASTInputDev": "fbaha",
      "MSGCNT": "4763",
      "NAME": "FBDECT_16",
      "NR": "191",
      "STATE": "off",
      "TYPE": "FBDECT",
      "fbaha_MSGCNT": "4763",
      "fbaha_RAWMSG": "0703001c00000053001000000000000c000000160004000000000000",
      "fbaha_TIME": "2015-01-11 19:44:07",
      "id": "16",
      "props": "powerMeter,switch"
    },
    "Readings": {
      "AktuellerBetriebEur": { "Value":"0", "Time":"2014-12-05 11:39:00" },
      "control": { "Value":"on fn=1 > 0.00 delay:0sec do:state off", "Time":"2015-01-10 16:05:10" },
      "current": { "Value":"0.0000 A", "Time":"2015-01-11 19:44:07" },
      "energy": { "Value":"457255 Wh", "Time":"2015-01-11 19:44:07" },
      "options": { "Value":"powerOnState:last,lock:none", "Time":"2015-01-10 16:05:09" },
      "power": { "Value":"0.00 W", "Time":"2015-01-11 19:44:07" },
      "powerFactor": { "Value":"0.000", "Time":"2015-01-11 19:44:07" },
      "relayTimes": { "Value":"disabled", "Time":"2014-09-15 18:45:27" },
      "state": { "Value":"off", "Time":"2015-01-11 19:44:07" },
      "tempadjust": { "Value":"0.0 C", "Time":"2015-01-10 16:05:09" },
      "temperature": { "Value":"22.1 C (measured)", "Time":"2015-01-11 19:44:07" },
      "voltage": { "Value":"227.277 V", "Time":"2015-01-11 19:44:07" }
    },
    "Attributes": {
      "IODev": "fbaha",
      "devStateIcon": ".*off:it_television@black .*on:it_television@red",
      "event-min-interval": "power:120",
      "event-on-change-reading": "state",
      "fp_Wohnzimmer": "125,363,0,",
      "fp_test3": "127,569,0,",
      "fp_test5": "71,326,0,",
      "room": "1_Iphone"
    }
  }
  ],
  "totalResultsReturned":1
}






Sent from my iPhone using Tapatalk
Fritzbox 7490 ( USV + Fall Back ), einige HM komponenten,ESPs

P.A.Trick

Hier mal der Output eines meiner MAX! Thermostate!

{
  "Arg":"DG.JZ.Thermostat",
  "Results": [
  {
    "Name":"DG.JZ.Thermostat",
    "PossibleSets":"wakeUp factoryReset groupid associate:EG.Haustuer,MAX_323103,UG.AZ.Thermostat,OG.SZ.Fensterkontakt,EG.WZ.Thermostat,OG.FZ.Thermostat,OG.BZ.Thermostat,EG.WC.Thermostat,EG.WC.Fensterkontakt,UG.AZ.Fensterkontakt,EG.KZ.Fensterkontakt,OG.SZ.Thermostat,MAX_343430,OG.FZ.Fensterkontakt,EG.KZ.Thermostat,DG.JZ.Fensterkontakt,OG.BZ.Fensterkontakt,fakeWallThermostat,fakeShutterContact deassociate:EG.Haustuer,MAX_323103,UG.AZ.Thermostat,OG.SZ.Fensterkontakt,EG.WZ.Thermostat,OG.FZ.Thermostat,OG.BZ.Thermostat,EG.WC.Thermostat,EG.WC.Fensterkontakt,UG.AZ.Fensterkontakt,EG.KZ.Fensterkontakt,OG.SZ.Thermostat,MAX_343430,OG.FZ.Fensterkontakt,EG.KZ.Thermostat,DG.JZ.Fensterkontakt,OG.BZ.Fensterkontakt,fakeWallThermostat,fakeShutterContact desiredTemperature:eco,comfort,boost,auto,off,5.0,5.5,6.0,6.5,7.0,7.5,8.0,8.5,9.0,9.5,10.0,10.5,11.0,11.5,12.0,12.5,13.0,13.5,14.0,14.5,15.0,15.5,16.0,16.5,17.0,17.5,18.0,18.5,19.0,19.5,20.0,20.5,21.0,21.5,22.0,22.5,23.0,23.5,24.0,24.5,25.0,25.5,26.0,26.5,27.0,27.5,28.0,28.5,29.0,29.5,30.0,on ecoTemperature:off,5.0,5.5,6.0,6.5,7.0,7.5,8.0,8.5,9.0,9.5,10.0,10.5,11.0,11.5,12.0,12.5,13.0,13.5,14.0,14.5,15.0,15.5,16.0,16.5,17.0,17.5,18.0,18.5,19.0,19.5,20.0,20.5,21.0,21.5,22.0,22.5,23.0,23.5,24.0,24.5,25.0,25.5,26.0,26.5,27.0,27.5,28.0,28.5,29.0,29.5,30.0,on comfortTemperature:off,5.0,5.5,6.0,6.5,7.0,7.5,8.0,8.5,9.0,9.5,10.0,10.5,11.0,11.5,12.0,12.5,13.0,13.5,14.0,14.5,15.0,15.5,16.0,16.5,17.0,17.5,18.0,18.5,19.0,19.5,20.0,20.5,21.0,21.5,22.0,22.5,23.0,23.5,24.0,24.5,25.0,25.5,26.0,26.5,27.0,27.5,28.0,28.5,29.0,29.5,30.0,on measurementOffset:-3.5,-3.0,-2.5,-2.0,-1.5,-1.0,-0.5,0.0,0.5,1.0,1.5,2.0,2.5,3.0,3.5 maximumTemperature:off,5.0,5.5,6.0,6.5,7.0,7.5,8.0,8.5,9.0,9.5,10.0,10.5,11.0,11.5,12.0,12.5,13.0,13.5,14.0,14.5,15.0,15.5,16.0,16.5,17.0,17.5,18.0,18.5,19.0,19.5,20.0,20.5,21.0,21.5,22.0,22.5,23.0,23.5,24.0,24.5,25.0,25.5,26.0,26.5,27.0,27.5,28.0,28.5,29.0,29.5,30.0,on minimumTemperature:off,5.0,5.5,6.0,6.5,7.0,7.5,8.0,8.5,9.0,9.5,10.0,10.5,11.0,11.5,12.0,12.5,13.0,13.5,14.0,14.5,15.0,15.5,16.0,16.5,17.0,17.5,18.0,18.5,19.0,19.5,20.0,20.5,21.0,21.5,22.0,22.5,23.0,23.5,24.0,24.5,25.0,25.5,26.0,26.5,27.0,27.5,28.0,28.5,29.0,29.5,30.0,on windowOpenTemperature:off,5.0,5.5,6.0,6.5,7.0,7.5,8.0,8.5,9.0,9.5,10.0,10.5,11.0,11.5,12.0,12.5,13.0,13.5,14.0,14.5,15.0,15.5,16.0,16.5,17.0,17.5,18.0,18.5,19.0,19.5,20.0,20.5,21.0,21.5,22.0,22.5,23.0,23.5,24.0,24.5,25.0,25.5,26.0,26.5,27.0,27.5,28.0,28.5,29.0,29.5,30.0,on windowOpenDuration boostDuration:30,15,60,10,5,20,0,25 boostValveposition decalcification maxValveSetting valveOffset weekProfile",
    "PossibleAttrs":"verbose:0,1,2,3,4,5 room group comment alias eventMap userReadings IODev do_not_notify:1,0 ignore:0,1 dummy:0,1 showtime:1,0 keepAuto:0,1 scanTemp:0,1 event-on-change-reading event-on-update-reading event-min-interval stateFormat 1 Anwesenheit Anwesenheit_map EG.KZ.Thermostat EG.KZ.Thermostat_map EG.WZ.Rollo.Fenster EG.WZ.Rollo.Fenster_map Handy_Florian Handy_Florian_map Heizung Heizung_map Rollos Rollos_map devStateIcon devStateStyle fp_Grundriss icon lightSceneParamsToSave lightSceneRestoreOnlyIfChanged:1,0 power-off power-on presence presence_map room_map sortby structexclude webCmd widgetOverride Heizung Heizung_map structexclude userattr",
    "Internals": {
      "CHANGED": "null",
      "CULMAX0_MSGCNT": "1",
      "CULMAX0_TIME": "2015-01-11 20:00:34",
      "DEF": "HeatingThermostat 0b3602",
      "LASTInputDev": "CULMAX0",
      "MSGCNT": "1",
      "NAME": "DG.JZ.Thermostat",
      "NR": "675",
      "RSSI": "-80",
      "STATE": "12.0 °C",
      "TYPE": "MAX",
      "addr": "0b3602",
      "backend": "CULMAX0",
      "dstsetting": "1",
      "mode": "0",
      "rferror": "0",
      "type": "HeatingThermostat"
    },
    "Readings": {
      "TimeInformationHour": { "Value":"1", "Time":"2014-09-19 21:03:24" },
      "battery": { "Value":"ok", "Time":"2015-01-11 20:00:34" },
      "boostDuration": { "Value":"5", "Time":"2014-09-20 01:19:59" },
      "boostValveposition": { "Value":"80", "Time":"2014-09-20 01:19:59" },
      "decalcification": { "Value":"Sat 12:00", "Time":"2014-09-20 01:19:59" },
      "desiredTemperature": { "Value":"12.0", "Time":"2015-01-11 20:00:34" },
      "ecoTemperature": { "Value":"17", "Time":"2014-09-20 10:05:30" },
      "groupid": { "Value":"0", "Time":"2014-09-19 23:30:15" },
      "maxValveSetting": { "Value":"80", "Time":"2014-09-20 01:20:07" },
      "measurementOffset": { "Value":"0", "Time":"2014-09-19 21:03:00" },
      "mode": { "Value":"auto", "Time":"2015-01-11 20:00:34" },
      "msgcnt": { "Value":"30", "Time":"2015-01-11 20:00:23" },
      "state": { "Value":"12.0 °C", "Time":"2015-01-11 20:00:34" },
      "temperature": { "Value":"23.2", "Time":"2015-01-11 18:24:03" },
      "valveOffset": { "Value":"0", "Time":"2014-09-20 01:19:59" },
      "valveposition": { "Value":"0", "Time":"2015-01-11 20:00:34" },
      "weekprofile-0-Sat-temp": { "Value":"12.0 °C  /  21.0 °C  /  12.0 °C", "Time":"2014-09-29 19:55:16" },
      "weekprofile-0-Sat-time": { "Value":"00:00-08:00  /  08:00-19:00  /  19:00-00:00", "Time":"2014-09-29 19:55:16" },
      "weekprofile-1-Sun-temp": { "Value":"12.0 °C  /  21.0 °C  /  12.0 °C", "Time":"2014-09-29 19:55:16" },
      "weekprofile-1-Sun-time": { "Value":"00:00-08:00  /  08:00-19:00  /  19:00-00:00", "Time":"2014-09-29 19:55:16" },
      "weekprofile-2-Mon-temp": { "Value":"12.0 °C  /  21.0 °C  /  19.0 °C  /  21.0 °C  /  12.0 °C", "Time":"2014-09-29 19:55:16" },
      "weekprofile-2-Mon-time": { "Value":"00:00-05:30  /  05:30-07:15  /  07:15-14:30  /  14:30-19:00  /  19:00-00:00", "Time":"2014-09-29 19:55:16" },
      "weekprofile-3-Tue-temp": { "Value":"12.0 °C  /  21.0 °C  /  19.0 °C  /  21.0 °C  /  12.0 °C", "Time":"2014-09-29 19:55:16" },
      "weekprofile-3-Tue-time": { "Value":"00:00-05:30  /  05:30-07:15  /  07:15-14:30  /  14:30-19:00  /  19:00-00:00", "Time":"2014-09-29 19:55:16" },
      "weekprofile-4-Wed-temp": { "Value":"12.0 °C  /  21.0 °C  /  19.0 °C  /  21.0 °C  /  12.0 °C", "Time":"2014-09-29 19:55:16" },
      "weekprofile-4-Wed-time": { "Value":"00:00-05:30  /  05:30-07:15  /  07:15-14:30  /  14:30-19:00  /  19:00-00:00", "Time":"2014-09-29 19:55:16" },
      "weekprofile-5-Thu-temp": { "Value":"12.0 °C  /  21.0 °C  /  19.0 °C  /  21.0 °C  /  12.0 °C", "Time":"2014-09-29 19:55:16" },
      "weekprofile-5-Thu-time": { "Value":"00:00-05:30  /  05:30-07:15  /  07:15-14:30  /  14:30-19:00  /  19:00-00:00", "Time":"2014-09-29 19:55:16" },
      "weekprofile-6-Fri-temp": { "Value":"12.0 °C  /  21.0 °C  /  19.0 °C  /  21.0 °C  /  12.0 °C", "Time":"2014-09-29 19:55:16" },
      "weekprofile-6-Fri-time": { "Value":"00:00-05:30  /  05:30-07:15  /  07:15-14:30  /  14:30-19:00  /  19:00-00:00", "Time":"2014-09-29 19:55:16" }
    },
    "Attributes": {
      "EG.KZ.Thermostat": "AllHeaters",
      "Heizung": "AllHeaters",
      "IODev": "CULMAX0",
      "alias": "Jolina",
      "event-min-interval": "temperature:60",
      "event-on-change-reading": ".*",
      "group": "Thermostate",
      "icon": "hc_wht_regler",
      "room": "_Thermostate,DG.Jolina",
      "scanTemp": "0",
      "userattr": "Heizung Heizung_map structexclude"
    }
  }
  ],
  "totalResultsReturned":1
}


Leider werden viele Räume gar nicht angezeigt. Ich vermute, dass die Devices nicht bekannt sind.
Wenn ja, sollten wir eine Liste machen welche Geräte noch fehlen!?
Cubietruck,RPI,QNAP Ts-419p+, FS20, FRITZ!DECT200, 7 MAX! Thermostate, 3 MAX! Fensterkontakte, Kodi, CUL V3.3, EM1000S, LW12, LD382, HUE, HM-CFG-USB-2, 1x HM-LC-SW1-FM, 2x HM-LC-SW2-FM, 2x HM-LC-Sw1PBU-FM, 3xHM-LC-Bl1PBU-FM,HM-SEC-RHS, 2xHM-SEC-SD,HM-WDS30-T-O, 3x HM-LC-Dim1TPBU-FM, RPI+AddOn

Brun

Ich würde mich auch gerne als Betatester zur verfügung stellen.

iOS: 8.1.2 auf iPhone 5c und iPad mini 2

In FHEM habe ich neben diversen HM Devices einen SMA Wechselrichter und einen Sunny Home Manger für meine PV Anlage und zusätzlich noch 3 VBUS Devices von der Heizung.


Gruß
Brun

ak0815

Zitat von: P.A.Trick am 11 Januar 2015, 22:43:19
Hier mal der Output eines meiner MAX! Thermostate!

{
  "Arg":"DG.JZ.Thermostat",
  "Results": [
  {
    "Name":"DG.JZ.Thermostat",
    "PossibleSets":"wakeUp factoryReset groupid associate:EG.Haustuer,MAX_323103,UG.AZ.Thermostat,OG.SZ.Fensterkontakt,EG.WZ.Thermostat,OG.FZ.Thermostat,OG.BZ.Thermostat,EG.WC.Thermostat,EG.WC.Fensterkontakt,UG.AZ.Fensterkontakt,EG.KZ.Fensterkontakt,OG.SZ.Thermostat,MAX_343430,OG.FZ.Fensterkontakt,EG.KZ.Thermostat,DG.JZ.Fensterkontakt,OG.BZ.Fensterkontakt,fakeWallThermostat,fakeShutterContact deassociate:EG.Haustuer,MAX_323103,UG.AZ.Thermostat,OG.SZ.Fensterkontakt,EG.WZ.Thermostat,OG.FZ.Thermostat,OG.BZ.Thermostat,EG.WC.Thermostat,EG.WC.Fensterkontakt,UG.AZ.Fensterkontakt,EG.KZ.Fensterkontakt,OG.SZ.Thermostat,MAX_343430,OG.FZ.Fensterkontakt,EG.KZ.Thermostat,DG.JZ.Fensterkontakt,OG.BZ.Fensterkontakt,fakeWallThermostat,fakeShutterContact desiredTemperature:eco,comfort,boost,auto,off,5.0,5.5,6.0,6.5,7.0,7.5,8.0,8.5,9.0,9.5,10.0,10.5,11.0,11.5,12.0,12.5,13.0,13.5,14.0,14.5,15.0,15.5,16.0,16.5,17.0,17.5,18.0,18.5,19.0,19.5,20.0,20.5,21.0,21.5,22.0,22.5,23.0,23.5,24.0,24.5,25.0,25.5,26.0,26.5,27.0,27.5,28.0,28.5,29.0,29.5,30.0,on ecoTemperature:off,5.0,5.5,6.0,6.5,7.0,7.5,8.0,8.5,9.0,9.5,10.0,10.5,11.0,11.5,12.0,12.5,13.0,13.5,14.0,14.5,15.0,15.5,16.0,16.5,17.0,17.5,18.0,18.5,19.0,19.5,20.0,20.5,21.0,21.5,22.0,22.5,23.0,23.5,24.0,24.5,25.0,25.5,26.0,26.5,27.0,27.5,28.0,28.5,29.0,29.5,30.0,on comfortTemperature:off,5.0,5.5,6.0,6.5,7.0,7.5,8.0,8.5,9.0,9.5,10.0,10.5,11.0,11.5,12.0,12.5,13.0,13.5,14.0,14.5,15.0,15.5,16.0,16.5,17.0,17.5,18.0,18.5,19.0,19.5,20.0,20.5,21.0,21.5,22.0,22.5,23.0,23.5,24.0,24.5,25.0,25.5,26.0,26.5,27.0,27.5,28.0,28.5,29.0,29.5,30.0,on measurementOffset:-3.5,-3.0,-2.5,-2.0,-1.5,-1.0,-0.5,0.0,0.5,1.0,1.5,2.0,2.5,3.0,3.5 maximumTemperature:off,5.0,5.5,6.0,6.5,7.0,7.5,8.0,8.5,9.0,9.5,10.0,10.5,11.0,11.5,12.0,12.5,13.0,13.5,14.0,14.5,15.0,15.5,16.0,16.5,17.0,17.5,18.0,18.5,19.0,19.5,20.0,20.5,21.0,21.5,22.0,22.5,23.0,23.5,24.0,24.5,25.0,25.5,26.0,26.5,27.0,27.5,28.0,28.5,29.0,29.5,30.0,on minimumTemperature:off,5.0,5.5,6.0,6.5,7.0,7.5,8.0,8.5,9.0,9.5,10.0,10.5,11.0,11.5,12.0,12.5,13.0,13.5,14.0,14.5,15.0,15.5,16.0,16.5,17.0,17.5,18.0,18.5,19.0,19.5,20.0,20.5,21.0,21.5,22.0,22.5,23.0,23.5,24.0,24.5,25.0,25.5,26.0,26.5,27.0,27.5,28.0,28.5,29.0,29.5,30.0,on windowOpenTemperature:off,5.0,5.5,6.0,6.5,7.0,7.5,8.0,8.5,9.0,9.5,10.0,10.5,11.0,11.5,12.0,12.5,13.0,13.5,14.0,14.5,15.0,15.5,16.0,16.5,17.0,17.5,18.0,18.5,19.0,19.5,20.0,20.5,21.0,21.5,22.0,22.5,23.0,23.5,24.0,24.5,25.0,25.5,26.0,26.5,27.0,27.5,28.0,28.5,29.0,29.5,30.0,on windowOpenDuration boostDuration:30,15,60,10,5,20,0,25 boostValveposition decalcification maxValveSetting valveOffset weekProfile",
    "PossibleAttrs":"verbose:0,1,2,3,4,5 room group comment alias eventMap userReadings IODev do_not_notify:1,0 ignore:0,1 dummy:0,1 showtime:1,0 keepAuto:0,1 scanTemp:0,1 event-on-change-reading event-on-update-reading event-min-interval stateFormat 1 Anwesenheit Anwesenheit_map EG.KZ.Thermostat EG.KZ.Thermostat_map EG.WZ.Rollo.Fenster EG.WZ.Rollo.Fenster_map Handy_Florian Handy_Florian_map Heizung Heizung_map Rollos Rollos_map devStateIcon devStateStyle fp_Grundriss icon lightSceneParamsToSave lightSceneRestoreOnlyIfChanged:1,0 power-off power-on presence presence_map room_map sortby structexclude webCmd widgetOverride Heizung Heizung_map structexclude userattr",
    "Internals": {
      "CHANGED": "null",
      "CULMAX0_MSGCNT": "1",
      "CULMAX0_TIME": "2015-01-11 20:00:34",
      "DEF": "HeatingThermostat 0b3602",
      "LASTInputDev": "CULMAX0",
      "MSGCNT": "1",
      "NAME": "DG.JZ.Thermostat",
      "NR": "675",
      "RSSI": "-80",
      "STATE": "12.0 °C",
      "TYPE": "MAX",
      "addr": "0b3602",
      "backend": "CULMAX0",
      "dstsetting": "1",
      "mode": "0",
      "rferror": "0",
      "type": "HeatingThermostat"
    },
    "Readings": {
      "TimeInformationHour": { "Value":"1", "Time":"2014-09-19 21:03:24" },
      "battery": { "Value":"ok", "Time":"2015-01-11 20:00:34" },
      "boostDuration": { "Value":"5", "Time":"2014-09-20 01:19:59" },
      "boostValveposition": { "Value":"80", "Time":"2014-09-20 01:19:59" },
      "decalcification": { "Value":"Sat 12:00", "Time":"2014-09-20 01:19:59" },
      "desiredTemperature": { "Value":"12.0", "Time":"2015-01-11 20:00:34" },
      "ecoTemperature": { "Value":"17", "Time":"2014-09-20 10:05:30" },
      "groupid": { "Value":"0", "Time":"2014-09-19 23:30:15" },
      "maxValveSetting": { "Value":"80", "Time":"2014-09-20 01:20:07" },
      "measurementOffset": { "Value":"0", "Time":"2014-09-19 21:03:00" },
      "mode": { "Value":"auto", "Time":"2015-01-11 20:00:34" },
      "msgcnt": { "Value":"30", "Time":"2015-01-11 20:00:23" },
      "state": { "Value":"12.0 °C", "Time":"2015-01-11 20:00:34" },
      "temperature": { "Value":"23.2", "Time":"2015-01-11 18:24:03" },
      "valveOffset": { "Value":"0", "Time":"2014-09-20 01:19:59" },
      "valveposition": { "Value":"0", "Time":"2015-01-11 20:00:34" },
      "weekprofile-0-Sat-temp": { "Value":"12.0 °C  /  21.0 °C  /  12.0 °C", "Time":"2014-09-29 19:55:16" },
      "weekprofile-0-Sat-time": { "Value":"00:00-08:00  /  08:00-19:00  /  19:00-00:00", "Time":"2014-09-29 19:55:16" },
      "weekprofile-1-Sun-temp": { "Value":"12.0 °C  /  21.0 °C  /  12.0 °C", "Time":"2014-09-29 19:55:16" },
      "weekprofile-1-Sun-time": { "Value":"00:00-08:00  /  08:00-19:00  /  19:00-00:00", "Time":"2014-09-29 19:55:16" },
      "weekprofile-2-Mon-temp": { "Value":"12.0 °C  /  21.0 °C  /  19.0 °C  /  21.0 °C  /  12.0 °C", "Time":"2014-09-29 19:55:16" },
      "weekprofile-2-Mon-time": { "Value":"00:00-05:30  /  05:30-07:15  /  07:15-14:30  /  14:30-19:00  /  19:00-00:00", "Time":"2014-09-29 19:55:16" },
      "weekprofile-3-Tue-temp": { "Value":"12.0 °C  /  21.0 °C  /  19.0 °C  /  21.0 °C  /  12.0 °C", "Time":"2014-09-29 19:55:16" },
      "weekprofile-3-Tue-time": { "Value":"00:00-05:30  /  05:30-07:15  /  07:15-14:30  /  14:30-19:00  /  19:00-00:00", "Time":"2014-09-29 19:55:16" },
      "weekprofile-4-Wed-temp": { "Value":"12.0 °C  /  21.0 °C  /  19.0 °C  /  21.0 °C  /  12.0 °C", "Time":"2014-09-29 19:55:16" },
      "weekprofile-4-Wed-time": { "Value":"00:00-05:30  /  05:30-07:15  /  07:15-14:30  /  14:30-19:00  /  19:00-00:00", "Time":"2014-09-29 19:55:16" },
      "weekprofile-5-Thu-temp": { "Value":"12.0 °C  /  21.0 °C  /  19.0 °C  /  21.0 °C  /  12.0 °C", "Time":"2014-09-29 19:55:16" },
      "weekprofile-5-Thu-time": { "Value":"00:00-05:30  /  05:30-07:15  /  07:15-14:30  /  14:30-19:00  /  19:00-00:00", "Time":"2014-09-29 19:55:16" },
      "weekprofile-6-Fri-temp": { "Value":"12.0 °C  /  21.0 °C  /  19.0 °C  /  21.0 °C  /  12.0 °C", "Time":"2014-09-29 19:55:16" },
      "weekprofile-6-Fri-time": { "Value":"00:00-05:30  /  05:30-07:15  /  07:15-14:30  /  14:30-19:00  /  19:00-00:00", "Time":"2014-09-29 19:55:16" }
    },
    "Attributes": {
      "EG.KZ.Thermostat": "AllHeaters",
      "Heizung": "AllHeaters",
      "IODev": "CULMAX0",
      "alias": "Jolina",
      "event-min-interval": "temperature:60",
      "event-on-change-reading": ".*",
      "group": "Thermostate",
      "icon": "hc_wht_regler",
      "room": "_Thermostate,DG.Jolina",
      "scanTemp": "0",
      "userattr": "Heizung Heizung_map structexclude"
    }
  }
  ],
  "totalResultsReturned":1
}


Leider werden viele Räume gar nicht angezeigt. Ich vermute, dass die Devices nicht bekannt sind.
Wenn ja, sollten wir eine Liste machen welche Geräte noch fehlen!?

Hallo,

danke nehme es auf. Kannst du mir auch noch ne JSON schicken direkt nachdem du die Temperatur in FHEM geändert hast?

Eine Liste habe ich angefangen. Wenn ich fertig bin veröffentliche ich sie mal.

Gruß
Andy
FHEM APP für iOS
http://apple.co/1F7gNYu

Blackcat

wenn ihr noch einen Tester für iOS 6 sucht, könnte ich mit folgenden Geräten helfen:
iPhone 5, iPad mini, iPad 4

meine Hardware besteht aus Milights und Homematic Thermostaten


edit: habe gerade gelesen, dass es erst ab iOS 7 geht .... schade
Viele Grüße Sandra - FHEM Style Entwicklerin iOS6+12
-----
ZBox nano, Homematic, Homebridge, Hue + Mi Light, ZWave, Dyson, etc.
https://www.foodcat.de
https://www.youtube.com/c/FoodCat (hier gibt es auch immer mehr Hausautomatisierungsvideos)