Aeon Labs Multi Sensor reagiert nicht auf Konfigurationsversuche

Begonnen von muellthos, 04 Februar 2015, 21:47:49

Vorheriges Thema - Nächstes Thema
Drucken
Nach unten Seiten1
Benutzer-Aktionen

muellthos

04 Februar 2015, 21:47:49
 Hi,
ich habe einen Aeon Labs Multi Sensor so weit gebracht, dass er grundsätzlich kommuniziert, jegliche Konfigurationsversuche scheinen aber fehlzuschlagen.
Was ich bis jetzt getan habe und funktioniert hat:


  • Inkludieren
  • set AssociationAdd 1 1
  • get model

Ich bekomme auch alle 240 Sekunden Wakeup Notification und dann die Antworten auf die get- Befehle.
Was nicht funktioniert hat;

  • set Wakeup Interval <verschiedene Werte kleiner 240>  -> keine Reaktion
  • set AssociationAdd 3 1  -> keine Reaktion
  • set ConfigGroupReports 5 (Temperatur) -> keine Reaktion
  • set ConfigGroupInterval <verschiedene Werte> -> keine Reaktion

Und ich bekomme auch keine readings.

Hier die Ausgabe von List:
Code Auswählen

Internals:
   DEF        ddcc441a 6
   IODev      ZMEUZB
   LASTInputDev ZMEUZB
   MSGCNT     36
   NAME       ZWave_SENSOR_BINARY_6
   NR         52
   STATE      open
   TYPE       ZWave
   ZMEUZB_MSGCNT 36
   ZMEUZB_RAWMSG 00040006028407
   ZMEUZB_TIME 2015-02-04 21:35:44
   homeId     ddcc441a
   id         06
   lastMsgTimestamp 1423082144
   Readings:
     2015-02-04 19:27:06   CMD             ZW_APPLICATION_UPDATE
     2015-02-04 21:03:29   assocGroup_01   Max 05 Nodes 01
     2015-02-04 21:10:18   basicReport     ff
     2015-02-04 19:39:15   battery         49 %
     2015-02-04 20:59:29   configGroupReports 0
     2015-02-04 19:43:17   model           Aeon Labs Multi Sensor
     2015-02-04 19:43:17   modelConfig     aeon_labs/alms.xml
     2015-02-04 19:43:17   modelId         0086-0002-0005
     2015-02-04 20:11:27   reportedState   open
     2015-02-04 20:11:27   state           open
     2015-02-04 20:23:28   transmit        OK
     2015-02-04 21:35:44   wakeup          notification
     2015-02-04 20:55:29   wakeupReport    interval 240 target 1
   WakeUp:
Attributes:
   IODev      ZMEUZB
   classes    SENSOR_BINARY SENSOR_MULTILEVEL BATTERY WAKE_UP CONFIGURATION ASSOCIATION MANUFACTURER_SPECIFIC VERSION
   room       ZWave
   verbose    5


Hier mein event log seit dem letzten update
Code Auswählen

2015.02.04 20:17:45 1: update finished, "shutdown restart" is needed to activate the changes.
2015.02.04 20:17:45 1:
2015.02.04 20:17:45 1: Please consider using the global attribute sendStatistics
2015.02.04 20:18:08 0: Server shutdown
2015.02.04 20:18:12 1: Including /usr/local/FHEM/etc/fhem.cfg
2015.02.04 20:18:12 3: WEB: port 8083 opened
2015.02.04 20:18:12 3: WEBphone: port 8084 opened
2015.02.04 20:18:12 3: WEBtablet: port 8085 opened
2015.02.04 20:18:13 3: telnetPort: port 7072 opened
2015.02.04 20:18:13 2: eventTypes: loaded 0 events from log/eventTypes.txt
2015.02.04 20:18:13 3: Opening ZMEUZB device /dev/ttyACM0
2015.02.04 20:18:13 3: Setting ZMEUZB baudrate to 115200
2015.02.04 20:18:13 3: ZMEUZB device opened
2015.02.04 20:18:14 1: Including /volume1/@appstore/FHEM/var/log/fhem.save
2015.02.04 20:18:15 2: SecurityCheck:  Running with root privileges. Restart FHEM for a new check if the problem is fixed, or set the global attribute motd to none to supress this message.
2015.02.04 20:18:15 0: Server started with 22 defined entities (version $Id: fhem.pl 7858 2015-02-03 20:14:28Z rudolfkoenig $, os linux, user root, pid 8163)
2015.02.04 20:18:15 3: ZWave reading config for aeon_labs/alms.xml
2015.02.04 20:18:17 0: Server shutdown
2015.02.04 20:18:20 1: Including /usr/local/FHEM/etc/fhem.cfg
2015.02.04 20:18:21 3: WEB: port 8083 opened
2015.02.04 20:18:21 3: WEBphone: port 8084 opened
2015.02.04 20:18:21 3: WEBtablet: port 8085 opened
2015.02.04 20:18:21 3: telnetPort: port 7072 opened
2015.02.04 20:18:21 2: eventTypes: loaded 0 events from log/eventTypes.txt
2015.02.04 20:18:21 3: Opening ZMEUZB device /dev/ttyACM0
2015.02.04 20:18:21 3: Setting ZMEUZB baudrate to 115200
2015.02.04 20:18:22 3: ZMEUZB device opened
2015.02.04 20:18:22 1: Including /volume1/@appstore/FHEM/var/log/fhem.save
2015.02.04 20:18:22 2: SecurityCheck:  Running with root privileges. Restart FHEM for a new check if the problem is fixed, or set the global attribute motd to none to supress this message.
2015.02.04 20:18:22 0: Server started with 22 defined entities (version $Id: fhem.pl 7858 2015-02-03 20:14:28Z rudolfkoenig $, os linux, user root, pid 8167)
2015.02.04 20:18:23 3: ZWave reading config for aeon_labs/alms.xml
2015.02.04 20:18:27 1: nothing to do...
2015.02.04 20:18:35 3: ZWave reading config for fibaro/fgwpe.xml
2015.02.04 20:22:50 2: ZWave get ZWave_SENSOR_BINARY_6 association
2015.02.04 20:23:30 2: ZMEUZB transmit NO_ACK for 05
2015.02.04 20:25:25 2: ZWave set ZWave_SENSOR_BINARY_6 associationAdd
2015.02.04 20:25:43 2: ZWave get ZWave_SENSOR_BINARY_6 association
2015.02.04 20:27:27 2: ZWave get ZWave_SENSOR_BINARY_6 association
2015.02.04 20:27:28 1: PERL WARNING: Use of uninitialized value $name in concatenation (.) or string at /usr/local/FHEM/bin/fhem.pl line 3677.
2015.02.04 20:27:28 1: readingsUpdate(,transmit,OK) missed to call readingsBeginUpdate first.
2015.02.04 20:27:28 1: readingsUpdate(,transmit,OK) missed to call readingsBeginUpdate first.
2015.02.04 20:27:28 1: readingsUpdate(,transmit,OK) missed to call readingsBeginUpdate first.
2015.02.04 20:27:28 1: readingsUpdate(,transmit,OK) missed to call readingsBeginUpdate first.
2015.02.04 20:32:12 2: ZWave set ZWave_SWITCH_BINARY_3 off
2015.02.04 20:32:12 2: ZMEUZB transmit NO_ACK for 03
2015.02.04 20:32:16 2: ZWave set ZWave_SWITCH_BINARY_3 on
2015.02.04 20:32:21 2: ZWave set ZWave_SWITCH_BINARY_3 off
2015.02.04 20:32:24 2: ZWave set ZWave_SWITCH_BINARY_3 on
2015.02.04 20:36:35 2: ZWave get ZWave_SENSOR_BINARY_6 configGroupReports
2015.02.04 20:39:29 1: readingsUpdate(,transmit,OK) missed to call readingsBeginUpdate first.
2015.02.04 20:39:40 2: ZWave set ZWave_SENSOR_BINARY_6 configGroupInterval
2015.02.04 20:40:08 2: ZWave set ZWave_SENSOR_BINARY_6 configGroupReports
2015.02.04 20:43:29 1: readingsUpdate(,transmit,OK) missed to call readingsBeginUpdate first.
2015.02.04 20:43:29 1: readingsUpdate(,transmit,OK) missed to call readingsBeginUpdate first.
2015.02.04 20:43:31 2: ZMEUZB transmit NO_ACK for 01
2015.02.04 20:53:50 2: ZWave set ZWave_SENSOR_BINARY_6 wakeupInterval
2015.02.04 20:54:38 2: ZWave get ZWave_SENSOR_BINARY_6 wakeupInterval
2015.02.04 20:55:29 4: Sending stored command: 130606840400003c0105
2015.02.04 20:55:29 4: Sending stored command: 130602840505
2015.02.04 20:55:29 4: Sending wakeupNoMoreInformation to node: 06
2015.02.04 20:55:29 1: readingsUpdate(,transmit,OK) missed to call readingsBeginUpdate first.
2015.02.04 20:56:56 2: ZWave get ZWave_SENSOR_BINARY_6 configGroupReports
2015.02.04 20:59:29 4: Sending stored command: 13060370056705
2015.02.04 20:59:29 4: Sending wakeupNoMoreInformation to node: 06
2015.02.04 20:59:29 1: readingsUpdate(,transmit,OK) missed to call readingsBeginUpdate first.
2015.02.04 20:59:29 1: readingsUpdate(,transmit,OK) missed to call readingsBeginUpdate first.
2015.02.04 21:02:14 2: ZWave get ZWave_SENSOR_BINARY_6 association
2015.02.04 21:03:29 4: Sending stored command: 13060385020305
2015.02.04 21:03:29 4: Sending wakeupNoMoreInformation to node: 06
2015.02.04 21:03:29 1: readingsUpdate(,transmit,OK) missed to call readingsBeginUpdate first.
2015.02.04 21:03:29 1: readingsUpdate(,transmit,OK) missed to call readingsBeginUpdate first.
2015.02.04 21:07:23 2: ZWave set ZWave_SENSOR_BINARY_6 configGroupInterval
2015.02.04 21:07:30 4: Sending stored command: 130605700471011e05
2015.02.04 21:07:30 4: Sending wakeupNoMoreInformation to node: 06
2015.02.04 21:07:30 1: readingsUpdate(,transmit,OK) missed to call readingsBeginUpdate first.
2015.02.04 21:07:32 2: ZMEUZB transmit NO_ACK for 01
2015.02.04 21:07:43 2: ZWave set ZWave_SENSOR_BINARY_6 configGroupReports
2015.02.04 21:11:31 4: Sending stored command: 130605700467010505
2015.02.04 21:11:31 4: Sending wakeupNoMoreInformation to node: 06
2015.02.04 21:11:31 1: readingsUpdate(,transmit,OK) missed to call readingsBeginUpdate first.
2015.02.04 21:11:33 2: ZMEUZB transmit NO_ACK for 01


Und noch die events:
Code Auswählen

2015-02-04 20:53:50 ZWave ZWave_SENSOR_BINARY_6 wakeupInterval 60 1
2015-02-04 20:55:29 ZWave ZWave_SENSOR_BINARY_6 wakeup: notification
2015-02-04 20:55:29 ZWave ZWave_SENSOR_BINARY_6 wakeupReport: interval 240 target 1
2015-02-04 20:59:29 ZWave ZWave_SENSOR_BINARY_6 wakeup: notification
2015-02-04 20:59:29 ZWave ZWave_SENSOR_BINARY_6 configGroupReports: 0
2015-02-04 21:03:21 Weather WJ temperature: -1
2015-02-04 21:03:21 Weather WJ wind: 5
2015-02-04 21:03:21 Weather WJ humidity: 57
2015-02-04 21:03:29 ZWave ZWave_SENSOR_BINARY_6 wakeup: notification
2015-02-04 21:03:29 ZWave ZWave_SENSOR_BINARY_6 assocGroup_01: Max 05 Nodes 01
2015-02-04 21:05:39 ZWave ZWave_SENSOR_BINARY_6 basicReport: ff
2015-02-04 21:07:23 ZWave ZWave_SENSOR_BINARY_6 configGroupInterval 30
2015-02-04 21:07:30 ZWave ZWave_SENSOR_BINARY_6 wakeup: notification
2015-02-04 21:07:43 ZWave ZWave_SENSOR_BINARY_6 configGroupReports 5
2015-02-04 21:09:38 ZWave ZWave_SENSOR_BINARY_6 basicReport: 00
2015-02-04 21:10:18 ZWave ZWave_SENSOR_BINARY_6 basicReport: ff
2015-02-04 21:11:31 ZWave ZWave_SENSOR_BINARY_6 wakeup: notification
2015-02-04 21:15:33 ZWave ZWave_SENSOR_BINARY_6 wakeup: notification
2015-02-04 21:18:21 Weather WJ temperature: -1
2015-02-04 21:18:21 Weather WJ wind: 5
2015-02-04 21:18:21 Weather WJ humidity: 57
2015-02-04 21:19:35 ZWave ZWave_SENSOR_BINARY_6 wakeup: notification
2015-02-04 21:23:38 ZWave ZWave_SENSOR_BINARY_6 wakeup: notification
2015-02-04 21:27:40 ZWave ZWave_SENSOR_BINARY_6 wakeup: notification
2015-02-04 21:31:42 ZWave ZWave_SENSOR_BINARY_6 wakeup: notification
2015-02-04 21:33:22 Weather WJ temperature: -1
2015-02-04 21:33:22 Weather WJ wind: 5
2015-02-04 21:33:22 Weather WJ humidity: 57
2015-02-04 21:35:44 ZWave ZWave_SENSOR_BINARY_6 wakeup: notification
2015-02-04 21:39:46 ZWave ZWave_SENSOR_BINARY_6 wakeup: notification
2015-02-04 21:43:48 ZWave ZWave_SENSOR_BINARY_6 wakeup: notification


Jemand 'ne Idee, was ich falsch mache oder falsch läuft???

ratlos,

muellthos

krikan

#1
04 Februar 2015, 22:29:24
Code Auswählen
2015.02.04 20:59:29 1: readingsUpdate(,transmit,OK) missed to call readingsBeginUpdate first.
2015.02.04 20:59:29 1: readingsUpdate(,transmit,OK) missed to call readingsBeginUpdate first.

Das in Deinem Log deutet (für mich) auf ein Code-Problem hin und könnte vielleicht mit Rudis Änderungen von gestern zusammenhängen. Also mal auf Rudi warten.

rudolfkoenig

#2
05 Februar 2015, 07:31:21
Habe die Fehlermeldung behoben, vermute aber, dass das eigentliche Problem damit nicht zu tun hat.
Evtl. waere dazu noch ein Log mit "attr zwdongle verbose 4" interessant.
Hat es vorgestern noch funktioniert?

muellthos

#3
05 Februar 2015, 18:45:27 Letzte Bearbeitung: 05 Februar 2015, 21:21:50 von muellthos
Hallo Rudolf,

ob es "vorgestern noch funktioniert" hat, kann ich nicht sagen, ich experimentiere erst seit Dienstag abend  ???

Die Fehlermeldung ist erst mal weg.

21:10 Ich kann den Sensor immer noch nicht konfigurieren.

Hier das Logfile  mit "attr verbose 4" für den ZMEUSB (der Stick) und "attr verbose 5" für den Sensor. Sensor ist node 6, dann habe ich auch noch eine Fibaro Steckdose , node 3, dort ist kein verbose Attribut gesetzt.
Code Auswählen

2015.02.05 20:30:27 2: ZWave set ZWave_SENSOR_BINARY_6 configGroupReports
2015.02.05 20:30:42 2: ZWave get ZWave_SENSOR_BINARY_6 configGroupReports
2015.02.05 20:31:26 4: ZMEUZB CMD:APPLICATION_COMMAND_HANDLER ID:06 ARG:028407
2015.02.05 20:31:26 4: Sending stored command: 13060570046701e105
2015.02.05 20:31:26 4: Sending stored command: 13060370056705
2015.02.05 20:31:26 4: Sending wakeupNoMoreInformation to node: 06
2015.02.05 20:31:26 4: ZMEUZB CMD:ZW_SEND_DATA ID:00 ARG:0003
2015.02.05 20:31:26 4: ZMEUZB transmit OK for 05
2015.02.05 20:31:26 4: ZMEUZB CMD:ZW_SEND_DATA ID:00 ARG:0002
2015.02.05 20:31:26 4: ZMEUZB transmit OK for e1
2015.02.05 20:31:26 4: ZMEUZB CMD:APPLICATION_COMMAND_HANDLER ID:06 ARG:087006670400000000
2015.02.05 20:31:26 4: ZMEUZB: CANCEL received, retransmitting.
2015.02.05 20:31:26 4: ZMEUZB CMD:ZW_SEND_DATA ID:00 ARG:0003
2015.02.05 20:31:26 4: ZMEUZB transmit OK for 05
2015.02.05 20:35:26 4: ZMEUZB CMD:APPLICATION_COMMAND_HANDLER ID:06 ARG:028407
2015.02.05 20:39:26 4: ZMEUZB CMD:APPLICATION_COMMAND_HANDLER ID:06 ARG:028407
2015.02.05 20:43:26 4: ZMEUZB CMD:APPLICATION_COMMAND_HANDLER ID:06 ARG:028407
2015.02.05 20:47:26 4: ZMEUZB CMD:APPLICATION_COMMAND_HANDLER ID:06 ARG:028407
2015.02.05 20:51:26 4: ZMEUZB CMD:APPLICATION_COMMAND_HANDLER ID:06 ARG:028407
2015.02.05 20:55:26 4: ZMEUZB CMD:APPLICATION_COMMAND_HANDLER ID:06 ARG:028407
2015.02.05 20:55:41 4: ZMEUZB CMD:APPLICATION_COMMAND_HANDLER ID:06 ARG:032001ff
2015.02.05 20:55:41 4: ZMEUZB CMD:APPLICATION_COMMAND_HANDLER ID:06 ARG:032001ff
2015.02.05 20:59:26 4: ZMEUZB CMD:APPLICATION_COMMAND_HANDLER ID:06 ARG:028407
2015.02.05 20:59:40 4: ZMEUZB CMD:APPLICATION_COMMAND_HANDLER ID:06 ARG:03200100
2015.02.05 20:59:40 4: ZMEUZB CMD:APPLICATION_COMMAND_HANDLER ID:06 ARG:03200100
2015.02.05 21:03:26 4: ZMEUZB CMD:APPLICATION_COMMAND_HANDLER ID:06 ARG:028407
2015.02.05 21:05:33 2: ZWave set ZWave_SWITCH_BINARY_3 on
2015.02.05 21:05:33 4: ZMEUZB CMD:ZW_SEND_DATA ID:01 ARG:001e
2015.02.05 21:05:33 2: ZMEUZB transmit NO_ACK for 03
2015.02.05 21:05:36 2: ZWave set ZWave_SWITCH_BINARY_3 off
2015.02.05 21:05:36 4: ZMEUZB CMD:ZW_SEND_DATA ID:00 ARG:0008
2015.02.05 21:05:36 4: ZMEUZB transmit OK for 03
2015.02.05 21:05:38 2: ZWave set ZWave_SWITCH_BINARY_3 on
2015.02.05 21:05:38 4: ZMEUZB CMD:ZW_SEND_DATA ID:01 ARG:0014
2015.02.05 21:05:38 2: ZMEUZB transmit NO_ACK for 03
2015.02.05 21:05:41 2: ZWave set ZWave_SWITCH_BINARY_3 off
2015.02.05 21:05:41 4: ZMEUZB CMD:ZW_SEND_DATA ID:00 ARG:0008
2015.02.05 21:05:41 4: ZMEUZB transmit OK for 03
2015.02.05 21:05:44 2: ZWave set ZWave_SWITCH_BINARY_3 on
2015.02.05 21:05:44 4: ZMEUZB CMD:ZW_SEND_DATA ID:00 ARG:0002
2015.02.05 21:05:44 4: ZMEUZB transmit OK for 03
2015.02.05 21:05:49 2: ZWave set ZWave_SWITCH_BINARY_3 off
2015.02.05 21:05:49 4: ZMEUZB CMD:ZW_SEND_DATA ID:00 ARG:0004
2015.02.05 21:05:49 4: ZMEUZB transmit OK for 03
2015.02.05 21:05:51 2: ZWave set ZWave_SWITCH_BINARY_3 on
2015.02.05 21:05:51 4: ZMEUZB CMD:ZW_SEND_DATA ID:01 ARG:0018
2015.02.05 21:05:51 2: ZMEUZB transmit NO_ACK for 03
2015.02.05 21:05:54 2: ZWave set ZWave_SWITCH_BINARY_3 off
2015.02.05 21:05:54 4: ZMEUZB CMD:ZW_SEND_DATA ID:00 ARG:000c
2015.02.05 21:05:54 4: ZMEUZB transmit OK for 03
2015.02.05 21:05:56 2: ZWave set ZWave_SWITCH_BINARY_3 on
2015.02.05 21:05:56 4: ZMEUZB CMD:ZW_SEND_DATA ID:00 ARG:0002
2015.02.05 21:05:56 4: ZMEUZB transmit OK for 03
2015.02.05 21:06:01 2: ZWave set ZWave_SWITCH_BINARY_3 off
2015.02.05 21:06:01 4: ZMEUZB CMD:ZW_SEND_DATA ID:00 ARG:000d
2015.02.05 21:06:01 4: ZMEUZB transmit OK for 03
2015.02.05 21:06:03 2: ZWave set ZWave_SWITCH_BINARY_3 on
2015.02.05 21:06:03 4: ZMEUZB CMD:ZW_SEND_DATA ID:00 ARG:0003
2015.02.05 21:06:03 4: ZMEUZB transmit OK for 03
2015.02.05 21:06:35 2: ZWave get ZWave_SENSOR_BINARY_6 battery
2015.02.05 21:07:02 2: ZWave get ZWave_SENSOR_BINARY_6 version
2015.02.05 21:07:26 4: ZMEUZB CMD:APPLICATION_COMMAND_HANDLER ID:06 ARG:028407
2015.02.05 21:07:26 4: Sending stored command: 130602800205
2015.02.05 21:07:26 4: Sending stored command: 130602861105
2015.02.05 21:07:26 4: Sending wakeupNoMoreInformation to node: 06
2015.02.05 21:07:26 4: ZMEUZB CMD:ZW_SEND_DATA ID:00 ARG:0003
2015.02.05 21:07:26 4: ZMEUZB transmit OK for 05
2015.02.05 21:07:26 4: ZMEUZB CMD:ZW_SEND_DATA ID:00 ARG:0002
2015.02.05 21:07:26 4: ZMEUZB transmit OK for 05
2015.02.05 21:07:26 4: ZMEUZB CMD:APPLICATION_COMMAND_HANDLER ID:06 ARG:07861206031c0112
2015.02.05 21:07:26 4: ZMEUZB: CANCEL received, retransmitting.
2015.02.05 21:07:26 4: ZMEUZB CMD:ZW_SEND_DATA ID:00 ARG:0002
2015.02.05 21:07:26 4: ZMEUZB transmit OK for 05
2015.02.05 21:07:28 4: ZMEUZB CMD:APPLICATION_COMMAND_HANDLER ID:06 ARG:03800327


und das Event-Log für den gleichen Zeitraum

Code Auswählen

2015-02-05 20:30:27 ZWave ZWave_SENSOR_BINARY_6 configGroupReports 225
2015-02-05 20:31:26 ZWave ZWave_SENSOR_BINARY_6 wakeup: notification
2015-02-05 20:31:26 ZWave ZWave_SENSOR_BINARY_6 configGroupReports: 0
2015-02-05 20:35:26 ZWave ZWave_SENSOR_BINARY_6 wakeup: notification
2015-02-05 20:39:26 ZWave ZWave_SENSOR_BINARY_6 wakeup: notification
2015-02-05 20:43:17 Weather WJ temperature: 0
2015-02-05 20:43:17 Weather WJ wind: 23
2015-02-05 20:43:17 Weather WJ humidity: 60
2015-02-05 20:43:26 ZWave ZWave_SENSOR_BINARY_6 wakeup: notification
2015-02-05 20:47:26 ZWave ZWave_SENSOR_BINARY_6 wakeup: notification
2015-02-05 20:51:26 ZWave ZWave_SENSOR_BINARY_6 wakeup: notification
2015-02-05 20:55:26 ZWave ZWave_SENSOR_BINARY_6 wakeup: notification
2015-02-05 20:55:41 ZWave ZWave_SENSOR_BINARY_6 basicReport: ff
2015-02-05 20:55:41 ZWave ZWave_SENSOR_BINARY_6 basicReport: ff
2015-02-05 20:58:17 Weather WJ temperature: 0
2015-02-05 20:58:17 Weather WJ wind: 23
2015-02-05 20:58:17 Weather WJ humidity: 60
2015-02-05 20:59:26 ZWave ZWave_SENSOR_BINARY_6 wakeup: notification
2015-02-05 20:59:40 ZWave ZWave_SENSOR_BINARY_6 basicReport: 00
2015-02-05 20:59:40 ZWave ZWave_SENSOR_BINARY_6 basicReport: 00
2015-02-05 21:03:26 ZWave ZWave_SENSOR_BINARY_6 wakeup: notification
2015-02-05 21:05:33 ZWave ZWave_SWITCH_BINARY_3 on
2015-02-05 21:05:33 ZWave ZWave_SWITCH_BINARY_3 TRANSMIT_NO_ACK
2015-02-05 21:05:33 ZWave ZWave_SWITCH_BINARY_3 transmit: NO_ACK
2015-02-05 21:05:36 ZWave ZWave_SWITCH_BINARY_3 off
2015-02-05 21:05:38 ZWave ZWave_SWITCH_BINARY_3 on
2015-02-05 21:05:38 ZWave ZWave_SWITCH_BINARY_3 TRANSMIT_NO_ACK
2015-02-05 21:05:38 ZWave ZWave_SWITCH_BINARY_3 transmit: NO_ACK
2015-02-05 21:05:41 ZWave ZWave_SWITCH_BINARY_3 off
2015-02-05 21:05:44 ZWave ZWave_SWITCH_BINARY_3 on
2015-02-05 21:05:49 ZWave ZWave_SWITCH_BINARY_3 off
2015-02-05 21:05:51 ZWave ZWave_SWITCH_BINARY_3 on
2015-02-05 21:05:51 ZWave ZWave_SWITCH_BINARY_3 TRANSMIT_NO_ACK
2015-02-05 21:05:51 ZWave ZWave_SWITCH_BINARY_3 transmit: NO_ACK
2015-02-05 21:05:54 ZWave ZWave_SWITCH_BINARY_3 off
2015-02-05 21:05:56 ZWave ZWave_SWITCH_BINARY_3 on
2015-02-05 21:06:01 ZWave ZWave_SWITCH_BINARY_3 off
2015-02-05 21:06:03 ZWave ZWave_SWITCH_BINARY_3 on
2015-02-05 21:07:26 ZWave ZWave_SENSOR_BINARY_6 wakeup: notification
2015-02-05 21:07:26 ZWave ZWave_SENSOR_BINARY_6 version: Lib 6 Prot 3.28 App 1.18
2015-02-05 21:07:28 ZWave ZWave_SENSOR_BINARY_6 battery: 39 %
2015-02-05 21:11:26 ZWave ZWave_SENSOR_BINARY_6 wakeup: notification
2015-02-05 21:13:17 Weather WJ temperature: 0
2015-02-05 21:13:17 Weather WJ wind: 23
2015-02-05 21:13:17 Weather WJ humidity: 60
2015-02-05 21:15:26 ZWave ZWave_SENSOR_BINARY_6 wakeup: notification
2015-02-05 21:15:41 ZWave ZWave_SENSOR_BINARY_6 basicReport: ff
2015-02-05 21:15:41 ZWave ZWave_SENSOR_BINARY_6 basicReport: ff


Scheinbar funktioniert mein Stick nicht richtig ?

Liegt das vielleicht an meiner Umgebung (Synology 212+ , Treiber cdc-acm.ko nachgeladen, damit der ZME_UZB1 erkannt wird und Martin Fischers Perl 5.16) ?

immer noch ratlos,

muellthos
Drucken
Nach oben Seiten1
Benutzer-Aktionen