ASC: Ein Rollo fährt nach Ersatz Shelly nicht mehr runter

Begonnen von MichaelO, 01 März 2024, 17:19:22

Vorheriges Thema - Nächstes Thema

MichaelO

Moin,

ich musste einen Shelly für eines meiner Rollos ersetzen. Insgesamt scheint alles wieder eingebunden, Siri steuert wie gewünscht, nur ASC führt den Rollo zwar hoch, aber abends nicht mehr runter. Auch reagiert das Rollo nicht mehr auf den Fensterkontakt (weder rauf noch runter). Sieht wer am Listing, woran es liegen könnte?

Internals:
   CFGFN     
   CID        shellyplus2pm_d48afc446da4
   DEF        shellyplus2pm_d48afc446da4
   FUUID      65d8bf50-f33f-497e-4549-8b00e0438031e9d9
   IODev      MQTT2_FHEM_Server
   LASTInputDev MQTT2_FHEM_Server
   MQTT2_FHEM_Server_CONN MQTT2_FHEM_Server_192.168.30.34_54788
   MQTT2_FHEM_Server_MSGCNT 21036
   MQTT2_FHEM_Server_TIME 2024-03-01 17:14:58
   MSGCNT     21036
   NAME       RS_WZ_Rolladen
   NR         292
   STATE      true
100
   TYPE       MQTT2_DEVICE
   eventCount 36879
   JSONMAP:
     status_current_pos pct
     status_state state
     status_temperature_tC temperature
   OLDREADINGS:
   READINGS:
     2024-02-23 17:45:28   ASC_Enable      on
     2024-03-01 17:15:03   ASC_ShadingMessage INFO: current shading status is 'out' - next check in 7.5m
     2024-03-01 17:14:58   ASC_ShuttersLastDrive manual
     2024-03-01 06:47:19   ASC_Time_DriveDown 01.03.2024 - 17:50
     2024-03-01 06:47:19   ASC_Time_DriveUp 02.03.2024 - 06:45
     2024-02-23 16:52:48   IODev           MQTT2_FHEM_Server
     2024-02-23 17:45:28   associatedWith  Rollladensteuerung
     2024-02-23 17:09:22   attrTemplateVersion 20220623
     2024-02-23 17:30:28   ble             {}
     2024-02-23 17:30:28   cloud_connected false
     2024-02-23 17:30:28   input_0_id      0
     2024-02-23 17:30:28   input_1_id      1
     2024-02-23 17:30:28   mqtt_connected  true
     2024-02-23 17:30:28   online          true
     2024-03-01 17:14:58   pct             100
     2024-03-01 17:14:58   rpc_dst         shellyplus2pm-d48afc446da4/events
     2024-03-01 17:14:58   rpc_method      NotifyStatus
     2024-02-23 17:30:28   rpc_params_cloud_connected false
     2024-03-01 17:14:58   rpc_params_cover_0_aenergy_by_minute_1 0.000
     2024-03-01 17:14:58   rpc_params_cover_0_aenergy_by_minute_2 0.000
     2024-03-01 17:14:58   rpc_params_cover_0_aenergy_by_minute_3 0.000
     2024-03-01 17:14:58   rpc_params_cover_0_aenergy_minute_ts 1709309700
     2024-03-01 17:14:58   rpc_params_cover_0_aenergy_total 39.964
     2024-03-01 16:48:22   rpc_params_cover_0_apower 0
     2024-03-01 16:48:22   rpc_params_cover_0_current 0
     2024-03-01 16:48:22   rpc_params_cover_0_current_pos 100
     2024-03-01 17:14:58   rpc_params_cover_0_id 0
     2024-03-01 16:48:09   rpc_params_cover_0_last_direction open
     2024-03-01 16:48:09   rpc_params_cover_0_move_started_at 1709308091.40
     2024-03-01 16:48:09   rpc_params_cover_0_move_timeout 25.00
     2024-03-01 16:48:22   rpc_params_cover_0_pf 0
     2024-02-23 17:30:28   rpc_params_cover_0_pos_control true
     2024-03-01 16:48:22   rpc_params_cover_0_source limit_switch
     2024-03-01 16:48:22   rpc_params_cover_0_state open
     2024-03-01 16:48:09   rpc_params_cover_0_target_pos 100
     2024-02-23 17:30:28   rpc_params_cover_0_temperature_tC 30.4
     2024-02-23 17:30:28   rpc_params_cover_0_temperature_tF 86.7
     2024-02-23 17:30:59   rpc_params_cover_0_voltage 230.6
     2024-02-23 17:40:17   rpc_params_events_1_cfg_rev 18
     2024-02-25 23:15:00   rpc_params_events_1_component input:1
     2024-02-25 23:15:00   rpc_params_events_1_event single_push
     2024-02-25 23:15:00   rpc_params_events_1_id 1
     2024-02-23 17:40:17   rpc_params_events_1_restart_required false
     2024-02-23 17:13:32   rpc_params_events_1_time_ms 996
     2024-02-25 23:15:00   rpc_params_events_1_ts 1708899300.72
     2024-02-23 17:30:28   rpc_params_input_0_id 0
     2024-02-23 17:30:28   rpc_params_input_1_id 1
     2024-02-23 17:30:28   rpc_params_mqtt_connected true
     2024-02-23 17:40:17   rpc_params_sys_cfg_rev 18
     2024-02-23 17:30:28   rpc_params_sys_fs_free 131072
     2024-02-23 17:30:28   rpc_params_sys_fs_size 458752
     2024-02-23 17:30:28   rpc_params_sys_kvs_rev 0
     2024-02-23 17:30:28   rpc_params_sys_mac D48AFC446DA4
     2024-02-23 17:30:28   rpc_params_sys_ram_free 143144
     2024-02-23 17:30:28   rpc_params_sys_ram_size 244284
     2024-02-23 17:30:28   rpc_params_sys_reset_reason 3
     2024-02-23 17:30:28   rpc_params_sys_restart_required false
     2024-02-23 17:30:28   rpc_params_sys_schedule_rev 1
     2024-02-23 17:30:28   rpc_params_sys_uptime 1
     2024-02-23 17:30:28   rpc_params_sys_webhook_rev 1
     2024-03-01 17:14:58   rpc_params_ts   1709309700.00
     2024-02-23 17:30:28   rpc_params_wifi_rssi -53
     2024-02-23 17:30:28   rpc_params_wifi_ssid Skynet_IoT
     2024-02-23 17:30:28   rpc_params_wifi_sta_ip 192.168.30.34
     2024-02-23 17:30:28   rpc_params_wifi_status got ip
     2024-02-23 17:30:28   rpc_params_ws_connected false
     2024-03-01 17:14:58   rpc_src         shellyplus2pm-d48afc446da4
     2024-03-01 17:14:58   state           open
     2024-03-01 17:14:58   status_aenergy_by_minute_1 0.000
     2024-03-01 17:14:58   status_aenergy_by_minute_2 0.000
     2024-03-01 17:14:58   status_aenergy_by_minute_3 0.000
     2024-03-01 17:14:58   status_aenergy_minute_ts 1709309700
     2024-03-01 17:14:58   status_aenergy_total 39.964
     2024-03-01 17:14:58   status_apower   0.0
     2024-03-01 17:14:58   status_current  0.000
     2024-03-01 17:14:58   status_freq     50.0
     2024-03-01 17:14:58   status_id       0
     2024-03-01 17:14:58   status_last_direction open
     2024-03-01 16:48:22   status_move_started_at 1709308091.40
     2024-03-01 16:48:22   status_move_timeout 25.00
     2024-03-01 17:14:58   status_pf       0.00
     2024-03-01 17:14:58   status_pos_control true
     2024-03-01 17:14:58   status_source   limit_switch
     2024-03-01 16:48:22   status_target_pos 100
     2024-03-01 17:14:58   status_temperature_tF 86.5
     2024-03-01 17:14:58   status_voltage  230.5
     2024-02-23 17:40:17   sys_cfg_rev     18
     2024-02-23 17:40:17   sys_fs_free     131072
     2024-02-23 17:40:17   sys_fs_size     458752
     2024-02-23 17:40:17   sys_kvs_rev     0
     2024-02-23 17:40:17   sys_mac         D48AFC446DA4
     2024-02-23 17:40:17   sys_ram_free    137168
     2024-02-23 17:40:17   sys_ram_size    244016
     2024-02-23 17:40:17   sys_reset_reason 3
     2024-02-23 17:40:17   sys_restart_required false
     2024-02-23 17:40:17   sys_schedule_rev 1
     2024-02-23 17:40:17   sys_time        17:40
     2024-02-23 17:40:17   sys_unixtime    1708706418
     2024-02-23 17:40:17   sys_uptime      591
     2024-02-23 17:40:17   sys_webhook_rev 1
     2024-03-01 17:14:58   temperature     30.3
     2024-02-23 17:30:28   wifi_rssi       -53
     2024-02-23 17:30:28   wifi_ssid       Skynet_IoT
     2024-02-23 17:30:28   wifi_sta_ip     192.168.30.34
     2024-02-23 17:30:28   wifi_status     got ip
     2024-02-23 17:30:28   ws_connected    false
Attributes:
   ASC        2
   ASC_Adv    off
   ASC_BrightnessSensor WR_1:P_DC1
   ASC_ExternalTrigger dy_WZ_Beschattung_manuell:state on:off 37:100
   ASC_Pos_Reading pct
   ASC_Shading_InOutAzimuth 120:305
   ASC_Shading_MinMax_Elevation 10:100
   ASC_Shading_Min_OutsideTemperature 21
   ASC_Shading_Mode always
   ASC_Shading_Pos 40
   ASC_Shading_StateChange_SunnyCloudy 2000:700 3
   ASC_Shading_WaitingPeriod 900
   ASC_TempSensor netatmo_Aussensensor:temperature
   ASC_Time_Down_Early 16:00
   ASC_Time_Up_Late 08:00
   ASC_Ventilate_Pos 98
   ASC_Ventilate_Window_Open on
   ASC_WindowRec FK_WZ_Fenster_rechts
   alias      Wohnzimmer Rolladen
   cmdIcon    open:fts_shutter_up close:fts_shutter_down stop:fts_shutter_manual half:fts_shutter_50
   comment    Shelly Plus 2 PM in Roller-Mode. 100=opened / 0=closed
   devStateIcon opening:fts_shutter_up@red closing:fts_shutter_down@red true:10px-kreis-gruen false:10px-kreis-rot 0:fts_shutter_100 100:fts_shutter_10 9\d:fts_shutter_10 8\d:fts_shutter_20 7\d:fts_shutter_30 6\d:fts_shutter_40 5\d:fts_shutter_50 4\d:fts_shutter_60 3\d:fts_shutter_70 2\d:fts_shutter_80 1\d:fts_shutter_90 0\d:fts_shutter_100 set_.*:fts_shutter_updown
   devicetopic shellyplus2pm-d48afc446da4
   genericDeviceType blind
   group      Rolladen
   homebridgeMapping clear
CurrentPosition=pct,minValue=0,maxValue=100
TargetPosition=pct::pct,minValue=0,maxValue=100,minStep=1
PositionState=rpc_params_cover_0_state,values=opening:INCREASING;closing:DECREASING,default=STOPPED
   icon       fts_shutter
   jsonMap    status_state:state status_current_pos:pct status_temperature_tC:temperature
   model      shellyPlus_2pm_roller_invert_0
   readingList $DEVICETOPIC/online:.* online
  $DEVICETOPIC/status/mqtt:.* { json2nameValue($EVENT, 'mqtt_', $JSONMAP) }
  $DEVICETOPIC/status/sys:.* { json2nameValue($EVENT, 'sys_', $JSONMAP) }
  $DEVICETOPIC/status/cover_0:.* { json2nameValue($EVENT, 'status_', $JSONMAP) }
  fhem2shelly/rpc:.* {}
shellyplus2pm_d48afc446da4:shellyplus2pm-d48afc446da4/events/rpc:.* { json2nameValue($EVENT, 'rpc_', $JSONMAP) }
shellyplus2pm_d48afc446da4:shellyplus2pm_d48afc446da4/status/ble:.* ble
shellyplus2pm_d48afc446da4:shellyplus2pm_d48afc446da4/status/cloud:.* { json2nameValue($EVENT, 'cloud_', $JSONMAP) }
shellyplus2pm_d48afc446da4:shellyplus2pm_d48afc446da4/status/input_0:.* { json2nameValue($EVENT, 'input_0_', $JSONMAP) }
shellyplus2pm_d48afc446da4:shellyplus2pm_d48afc446da4/status/input_1:.* { json2nameValue($EVENT, 'input_1_', $JSONMAP) }
shellyplus2pm_d48afc446da4:shellyplus2pm_d48afc446da4/status/wifi:.* { json2nameValue($EVENT, 'wifi_', $JSONMAP) }
shellyplus2pm_d48afc446da4:shellyplus2pm_d48afc446da4/status/ws:.* { json2nameValue($EVENT, 'ws_', $JSONMAP) }
shellyplus2pm_d48afc446da4:shellyplus2pm-d48afc446da4/status/ble:.* ble
shellyplus2pm_d48afc446da4:shellyplus2pm-d48afc446da4/status/cloud:.* { json2nameValue($EVENT, 'cloud_', $JSONMAP) }
shellyplus2pm_d48afc446da4:shellyplus2pm-d48afc446da4/status/input_0:.* { json2nameValue($EVENT, 'input_0_', $JSONMAP) }
shellyplus2pm_d48afc446da4:shellyplus2pm-d48afc446da4/status/input_1:.* { json2nameValue($EVENT, 'input_1_', $JSONMAP) }
shellyplus2pm_d48afc446da4:shellyplus2pm-d48afc446da4/status/wifi:.* { json2nameValue($EVENT, 'wifi_', $JSONMAP) }
shellyplus2pm_d48afc446da4:shellyplus2pm-d48afc446da4/status/ws:.* { json2nameValue($EVENT, 'ws_', $JSONMAP) }
   room       1.1_Wohnzimmer,9.8_Homekit
   setList    open:noArg $DEVICETOPIC/rpc {"id":0,"src":"fhem2shelly","method":"Cover.Open","params": {"id":0}}
  close:noArg $DEVICETOPIC/rpc {"id":0,"src":"fhem2shelly","method":"Cover.Close","params": {"id":0}}
  half:noArg $DEVICETOPIC/rpc {"id":0,"src":"fhem2shelly","method":"Cover.GoToPosition","params": {"id":0,"pos":50}}
  stop:noArg $DEVICETOPIC/rpc {"id":0,"src":"fhem2shelly","method":"Cover.Stop","params": {"id":0}}
  pct:slider,0,1,100 $DEVICETOPIC/rpc {"id":0,"src":"fhem2shelly","method":"Cover.GoToPosition","params": {"id":0,"pos":$EVTPART1}}
  x_update:noArg $DEVICETOPIC/rpc {"id":0,"src":"fhem2shelly","method":"Shelly.Update","params": {"stage":"stable"}}
  x_reboot:noArg $DEVICETOPIC/rpc {"id":0,"src":"fhem2shelly","method":"Shelly.Reboot"}
  x_eco:true,false $DEVICETOPIC/rpc {"id":0,"src":"fhem2shelly","method":"Sys.SetConfig","params": {"config": {"device": {"eco_mode": $EVTPART1}}}}
   setStateList open close half stop pct
   stateFormat online
pct
   userattr   ASC_Adv:on,off ASC_Antifreeze:off,soft,hard,am,pm ASC_Antifreeze_Pos:5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_AutoAstroModeEvening:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeEveningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_AutoAstroModeMorning:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeMorningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_BlockingTime_afterManual ASC_BlockingTime_beforeDayOpen ASC_BlockingTime_beforeNightClose ASC_BrightnessSensor ASC_Closed_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_ComfortOpen_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_CommandTemplate ASC_Down:time,astro,brightness,roommate ASC_DriveUpMaxDuration ASC_Drive_Delay ASC_Drive_DelayStart ASC_ExternalTrigger ASC_GuestRoom:on,off ASC_LockOut:soft,hard,off ASC_LockOut_Cmd:inhibit,blocked,protection ASC_Mode_Down:absent,always,off,home ASC_Mode_Up:absent,always,off,home ASC_Open_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Partymode:on,off ASC_Pos_Reading ASC_PrivacyDownValue_beforeNightClose ASC_PrivacyDown_Pos ASC_PrivacyUpValue_beforeDayOpen ASC_PrivacyUp_Pos ASC_RainProtection:on,off ASC_Roommate_Device ASC_Roommate_Reading ASC_Self_Defense_AbsentDelay ASC_Self_Defense_Mode:absent,gone,off ASC_Shading_BetweenTheTime ASC_Shading_InOutAzimuth ASC_Shading_MinMax_Elevation ASC_Shading_Min_OutsideTemperature ASC_Shading_Mode:absent,always,off,home ASC_Shading_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Shading_StateChange_SunnyCloudy ASC_Shading_WaitingPeriod ASC_Shutter_IdleDetection ASC_ShuttersPlace:window,terrace,awning,EG_window ASC_SlatPosCmd_SlatDevice ASC_Sleep_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_TempSensor ASC_Time_Down_Early ASC_Time_Down_Late ASC_Time_Up_Early ASC_Time_Up_Late ASC_Time_Up_WE_Holiday ASC_Up:time,astro,brightness,roommate ASC_Ventilate_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Ventilate_Window_Open:on,off ASC_WiggleValue ASC_WindParameters ASC_WindProtection:on,off ASC_WindowRec ASC_WindowRec_PosAfterDayClosed:open,lastManual ASC_WindowRec_subType:twostate,threestate
   verbose    0
   webCmd     :open:close:half:stop:pct

Beta-User

"Die üblichen Verdächtigen" hast du geprüft?

Das hier klingt nämlich verdächtig:
2024-03-01 17:14:58  ASC_ShuttersLastDrive manual
Server: HP-elitedesk@Debian 12, aktuelles FHEM@ConfigDB | CUL_HM (VCCU) | MQTT2: MiLight@ESP-GW, BT@OpenMQTTGw | MySensors: seriell, v.a. 2.3.1@RS485 | ZWave | ZigBee@deCONZ | SIGNALduino | MapleCUN | RHASSPY
svn: u.a MySensors, Weekday-&RandomTimer, Twilight,  div. attrTemplate-files

MichaelO

Wer auch immer "die Üblichen" sind, ich denke, alles Mögliche geprüft zu haben. Die manuelle Fahrt rührt daher, dass ich ja irgendwie das Rollo runtermachen muss. Und danach hab ich dann gepostet und das Listing gemacht.

Wie gesagt, fährt das Rollo rauf genau nach Plan/Timer, aber es fährt weder runter noch reagiert es auf den Fenstersensor zum Lüften.

CoolTux

Stella mal bitte expert Attribut auf 1 und mache ein Set createNewNotifyDev
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

MichaelO

Hab ich gemacht, ohne Änderung. Was mir gestern aufgefallen ist:

Ich hatte tagsüber den externen Trigger zur Beschattung an und den angelassen, als die Sonne unterging. Am Abend hab ich dann den Trigger auf off gesetzt und dann fuhr das Rollo nicht erwartet hoch, sondern komplett runter. Keine Ahnung warum das Device das so macht. Im ASC sieht es zumindest so aus, als ob alle Trigger richtig sind. Trotzdem fährt es nur automatisch rauf aber nicht runter.

Shutters Next DriveUp Next DriveDown ASC Up ASC Down ASC Mode Up ASC Mode Down Partymode Lock-Out Last Drive Position Last Position Shading Info
 RS_BR_Rolladen 11.03.2024 - 06:24:58 10.03.2024 - 18:07:02 astro astro always always off off day open 100 0 out - 09:46:02
 RS_WS_Rolladen 11.03.2024 - 07:00:02 10.03.2024 - 18:07:02 astro astro off off off off manual 100 100 out - 17:45:28
 RS_WZ_Rolladen 11.03.2024 - 06:24:58 10.03.2024 - 18:07:02 astro astro always always off off manual 100 0 out - 17:45:28

CoolTux

Dann bräuchte ich bitte eine erweiterte Logoausgabe. Also bitte einmal verbose auf 4 vom ASC Device
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

MichaelO

Reicht Dir das, oder brauchst Du eine spezielle Uhrzeit?

2024.03.12 10:30:45 4: AutoShuttersControl (Rollladensteuerung) - Devname: global Name: Rollladensteuerung Notify: $VAR1 = [
          'SAVE'
        ];

2024.03.12 10:30:45 4: AutoShuttersControl (Rollladensteuerung) - ShuttersControl: Devicename eq global
2024.03.12 10:31:00 4: AutoShuttersControl (Rollladensteuerung) - Devname: RS_WZ_Rolladen Name: Rollladensteuerung Notify: $VAR1 = [
          'rpc_params_cover_0_aenergy_by_minute_2: 0.000',
          'rpc_params_cover_0_aenergy_by_minute_3: 0.000',
          'rpc_params_cover_0_id: 0',
          'rpc_params_cover_0_aenergy_minute_ts: 1710235860',
          'rpc_params_ts: 1710235860.00',
          'rpc_params_cover_0_aenergy_by_minute_1: 0.000',
          'rpc_params_cover_0_aenergy_total: 85.149',
          'rpc_method: NotifyStatus',
          'rpc_src: shellyplus2pm-d48afc446da4',
          'rpc_dst: shellyplus2pm-d48afc446da4/events'
        ];

2024.03.12 10:31:00 4: AutoShuttersControl (Rollladensteuerung) - Devname: RS_WZ_Rolladen Name: Rollladensteuerung Notify: $VAR1 = [
          'status_freq: 50.0',
          'status_voltage: 235.6',
          'status_aenergy_minute_ts: 1710235860',
          'status_id: 0',
          'status_pos_control: true',
          'status_temperature_tF: 113.3',
          'status_apower: 0.0',
          'status_pf: 0.00',
          'state: open',
          'status_aenergy_by_minute_3: 0.000',
          'status_aenergy_total: 85.149',
          'status_source: limit_switch',
          'pct: 100',
          'status_aenergy_by_minute_2: 0.000',
          'temperature: 45.2',
          'status_last_direction: open',
          'status_current: 0.000',
          'status_aenergy_by_minute_1: 0.000'
        ];

2024.03.12 10:31:00 4: AutoShuttersControl (Rollladensteuerung) - Devname: Rollladensteuerung Name: Rollladensteuerung Notify: $VAR1 = [
          'RS_WZ_Rolladen_PosValue: 100'
        ];

2024.03.12 10:31:00 4: AutoShuttersControl (Rollladensteuerung) - Devname: Rollladensteuerung Name: Rollladensteuerung Notify: $VAR1 = [
          'state: manual'
        ];

2024.03.12 10:31:00 4: AutoShuttersControl (Rollladensteuerung) - Devname: RS_WZ_Rolladen Name: Rollladensteuerung Notify: $VAR1 = [
          'ASC_ShuttersLastDrive: manual'
        ];

2024.03.12 10:31:00 4: AutoShuttersControl (Rollladensteuerung) - Devname: WR_1 Name: Rollladensteuerung Notify: $VAR1 = [
          'Total_DC_P: 6230.35',
          'SW_Total_DC_P: 12129'
        ];

2024.03.12 10:31:00 4: AutoShuttersControl (RS_WZ_Rolladen) - EventProcessingShadingBrightness
2024.03.12 10:31:00 4: AutoShuttersControl (RS_BR_Rolladen) - EventProcessingShadingBrightness
2024.03.12 10:31:01 4: AutoShuttersControl (Rollladensteuerung) - Devname: WR_1 Name: Rollladensteuerung Notify: $VAR1 = [
          'Total_AC_Active_P: 6040.00',
          'Total_AC_Reactive_P: 390.11',
          'SW_Home_own_consumption: -2501',
          'SW_Total_AC_Active_P: 11785',
          'SW_Home_own_consumption_from_PV: -2501'
        ];

2024.03.12 10:31:01 4: AutoShuttersControl (RS_WZ_Rolladen) - EventProcessingShadingBrightness
2024.03.12 10:31:01 4: AutoShuttersControl (RS_BR_Rolladen) - EventProcessingShadingBrightness
2024.03.12 10:31:01 4: AutoShuttersControl (Rollladensteuerung) - Devname: WR_1 Name: Rollladensteuerung Notify: $VAR1 = [
          'Total_AC_Apparent_P: 6052.09'
        ];

2024.03.12 10:31:01 4: AutoShuttersControl (RS_WZ_Rolladen) - EventProcessingShadingBrightness
2024.03.12 10:31:01 4: AutoShuttersControl (RS_BR_Rolladen) - EventProcessingShadingBrightness
2024.03.12 10:31:02 4: AutoShuttersControl (Rollladensteuerung) - Devname: WR_1 Name: Rollladensteuerung Notify: $VAR1 = [
          'Battery_temperature: 21.10'
        ];

2024.03.12 10:31:02 4: AutoShuttersControl (RS_WZ_Rolladen) - EventProcessingShadingBrightness
2024.03.12 10:31:02 4: AutoShuttersControl (RS_BR_Rolladen) - EventProcessingShadingBrightness
2024.03.12 10:31:02 4: AutoShuttersControl (Rollladensteuerung) - Devname: WR_1 Name: Rollladensteuerung Notify: $VAR1 = [
          'Total_Active_P_EM: -14335.00',
          'Total_Reactive_P_EM: -632.00',
          'SW_Home_own_consumption: -2550',
          'SW_Home_own_consumption_from_PV: -2550'
        ];

2024.03.12 10:31:02 4: AutoShuttersControl (RS_WZ_Rolladen) - EventProcessingShadingBrightness
2024.03.12 10:31:02 4: AutoShuttersControl (RS_BR_Rolladen) - EventProcessingShadingBrightness
2024.03.12 10:31:03 4: AutoShuttersControl (Rollladensteuerung) - Devname: WR_1 Name: Rollladensteuerung Notify: $VAR1 = [
          'Total_Apparent_P_EM: -14363.80',
          'P_DC1: 2406.73'
        ];

2024.03.12 10:31:03 4: AutoShuttersControl (RS_WZ_Rolladen) - EventProcessingShadingBrightness
2024.03.12 10:31:03 4: AutoShuttersControl (RS_WZ_Rolladen) - EventProcessingShadingBrightness
            Brightness: 2406.73
2024.03.12 10:31:03 4: AutoShuttersControl (Rollladensteuerung) - Shading Processing, Rollladen: RS_WZ_Rolladen Azimuth: 146.7 Elevation: 29.8 Brightness: 2382 OutTemp: -2.4
2024.03.12 10:31:03 4: AutoShuttersControl (Rollladensteuerung) - Shading Processing, Rollladen: RS_WZ_Rolladen Nach dem return
2024.03.12 10:31:03 4: AutoShuttersControl (Rollladensteuerung) - Shading Processing, Rollladen: RS_WZ_Rolladen In der Out Abfrage, Shadingwert: out, Zeitstempel: 1708706728
2024.03.12 10:31:03 4: AutoShuttersControl (Rollladensteuerung) - Devname: RS_WZ_Rolladen Name: Rollladensteuerung Notify: $VAR1 = [
          'ASC_ShadingMessage: INFO: current shading status is \'out\' - next check in 7.5m'
        ];

2024.03.12 10:31:03 4: AutoShuttersControl (RS_BR_Rolladen) - EventProcessingShadingBrightness
2024.03.12 10:31:03 4: AutoShuttersControl (RS_BR_Rolladen) - EventProcessingShadingBrightness
            Brightness: 2406.73
2024.03.12 10:31:03 4: AutoShuttersControl (Rollladensteuerung) - Shading Processing, Rollladen: RS_BR_Rolladen Azimuth: 146.7 Elevation: 29.8 Brightness: 2382 OutTemp: -2.4
2024.03.12 10:31:03 4: AutoShuttersControl (Rollladensteuerung) - Devname: WR_1 Name: Rollladensteuerung Notify: $VAR1 = [
          'P_DC2: 3818.09'
        ];

CoolTux

Wurde das Rollo hier bei dem Beispiel tatsächlich manuell gefahren?
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

MichaelO

Hm, das hatte ich bislang übersehen. Nein... die Fahrt für den RS_WZ_Rolladen hoch wurde wie gewünscht automatisch durchgeführt. Ich habe ihn zuletzt gestern Abend wieder manuell geschlossen, weil da ja nichts von selbst passiert. Hab auch den Fenstersensor nochmal getestet, der wird in fhem korrekt dargestellt wenn auf-zu.

CoolTux

Zitat von: Beta-User am 01 März 2024, 21:07:47"Die üblichen Verdächtigen" hast du geprüft?

Das hier klingt nämlich verdächtig:
2024-03-01 17:14:58  ASC_ShuttersLastDrive manual

Wo wir wieder hier wären.
Setz mal bitte event-on-change-reading .*
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

MichaelO

Hab ich gemacht, den ganzen Tag das Rollo RS_WZ_Rolladen nach dem automatischen Hochfahren nicht bewegt, abends bleibt es offen. Hier das aktuelle Listing:

Internals:
   FUUID      5ddbdeca-f33f-497e-9ac8-f9159a4a09aab44c
   FVERSION   73_AutoShuttersControl.pm:v0.10.25-s26950/2023-01-03
   MID        da39a3ee5e6b4b0d3255bfef95601890afd80709
   NAME       Rollladensteuerung
   NOTIFYDEV  AU_Sonnensensor,FK_BR_Fenster_links,FK_WS_Fenster_rechts,FK_WZ_Fenster_rechts,MITTELSTR,Rollladensteuerung,WR_1,astro,dy_BR_Beschattung_manuell,dy_WZ_Beschattung_manuell,global,RS_BR_Rolladen,RS_WS_Rolladen,RS_WZ_Rolladen
   NR         205
   NTFY_ORDER 51-Rollladensteuerung
   STATE      manual
   TYPE       AutoShuttersControl
   VERSION    v0.10.25
   eventCount 54293
   OLDREADINGS:
   READINGS:
     2024-03-13 18:12:45   RS_BR_Rolladen_PosValue 0
     2024-03-13 18:12:20   RS_BR_Rolladen_lastPosValue 100
     2024-03-13 18:12:20   RS_BR_Rolladen_nextAstroTimeEvent 14.03.2024 - 06:18
     2023-09-05 06:40:13   RS_WS_Rolladen_PosValue 100
     2023-06-15 10:38:40   RS_WS_Rolladen_lastPosValue 20
     2024-03-13 18:12:20   RS_WS_Rolladen_nextAstroTimeEvent 14.03.2024 - 07:00
     2024-03-13 18:41:00   RS_WZ_Rolladen_PosValue 100
     2024-01-05 16:13:11   RS_WZ_Rolladen_lastDelayPosValue 0
     2024-03-13 06:20:23   RS_WZ_Rolladen_lastPosValue 0
     2024-03-13 18:12:20   RS_WZ_Rolladen_nextAstroTimeEvent 14.03.2024 - 06:18
     2023-03-09 15:45:59   WZ_Rolladen_PosValue 100
     2023-03-10 06:44:20   WZ_Rolladen_lastPosValue 0
     2021-06-26 14:37:08   ascEnable       on
     2024-02-23 17:49:10   controlShading  on
     2021-06-26 14:37:08   hardLockOut     off
     2024-02-23 17:45:28   room_1.1_Wohnzimmer_9.8_Homekit RS_WZ_Rolladen
     2024-02-23 17:45:28   room_1.7_Buero_9.8_Homekit RS_BR_Rolladen
     2024-02-23 17:45:28   room_2.1_Werkstatt_9.8_Homekit RS_WS_Rolladen
     2021-06-26 14:37:08   selfDefense     off
     2024-03-13 18:41:00   state           manual
     2021-06-26 14:37:08   sunriseTimeWeHoliday off
     2024-02-23 17:45:28   userAttrList    rolled out
   helper:
     shuttersList:
       RS_BR_Rolladen
       RS_WS_Rolladen
       RS_WZ_Rolladen
   monitoredDevs:
     AU_Sonnensensor:
       RS_WS_Rolladen ASC_BrightnessSensor
     FK_BR_Fenster_links:
       RS_BR_Rolladen ASC_WindowRec
     FK_WS_Fenster_rechts:
       RS_WS_Rolladen ASC_WindowRec
     FK_WZ_Fenster_rechts:
       RS_WZ_Rolladen ASC_WindowRec
     MITTELSTR:
       Rollladensteuerung ASC_residentsDev
     RS_BR_Rolladen:
     RS_WZ_Rolladen:
     WR_1:
       RS_BR_Rolladen ASC_BrightnessSensor
       RS_WZ_Rolladen ASC_BrightnessSensor
     astro:
       Rollladensteuerung ASC_twilightDevice
     dy_BR_Beschattung_manuell:
       RS_BR_Rolladen ASC_ExternalTrigger
     dy_WZ_Beschattung_manuell:
       RS_WZ_Rolladen ASC_ExternalTrigger
Attributes:
   ASC_autoAstroModeEvening HORIZON
   ASC_autoAstroModeEveningHorizon -1
   ASC_autoAstroModeMorning HORIZON
   ASC_autoAstroModeMorningHorizon -2
   ASC_autoShuttersControlEvening on
   ASC_autoShuttersControlMorning on
   ASC_brightnessDriveUpDown 130:4
   ASC_expert 1
   ASC_freezeTemp -3
   ASC_residentsDev MITTELSTR:STATE
   ASC_tempSensor netatmo_Aussensensor:temperature
   ASC_twilightDevice astro
   devStateIcon { ShuttersControl_DevStateIcon($name) }
   event-on-change-reading .*
   icon       fts_shutter_automatic
   room       0.1_Mittelstr
   verbose    0

CoolTux

Es kann sein das wenn man den ganzen Tag damit rumspielt sich das Rollo zusammen mit ASC erst wieder einspielen müssen. Da bitte wenigsten 48 Stunden mitnehmen.
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net