FHEM - Hausautomations-Systeme > Unterstützende Dienste

überarbeitet SYSSTAT modul: non-blocking, remote kommandos, beliebige readings

<< < (33/33)

justme1968:
danke für den hinweis. der fix muss aber etwas anders ausschauen.

ab morgen im update.

PSI69:
Mahlzeit @All!

Seit einiger Zeit habe ich folgende Zeilen im Logfile:


--- Code: ---2021.10.13 11:53:18 1: PERL WARNING: Use of uninitialized value $avg_1 in concatenation (.) or string at ./FHEM/32_SYSSTAT.pm line 1193.
2021.10.13 11:53:18 1: PERL WARNING: Use of uninitialized value $avg_5 in concatenation (.) or string at ./FHEM/32_SYSSTAT.pm line 1193.
2021.10.13 11:53:18 1: PERL WARNING: Use of uninitialized value $avg_15 in concatenation (.) or string at ./FHEM/32_SYSSTAT.pm line 1193.

--- Ende Code ---

Folgende Devices habe ich definiert ('list TYPE=SYSSTAT'):

--- Code: ---pihole
qnap
--- Ende Code ---

OK, also flugs verbose 5 auf beiden und gewartet; Ergebnis:

--- Code: ---2021.10.13 11:53:17 5: pihole: trying /proc/loadavg
2021.10.13 11:53:17 4: pihole: sending: cat /proc/loadavg
2021.10.13 11:53:17 5: pihole: trying /proc/uptime
2021.10.13 11:53:18 4: pihole: sending: cat /sys/class/thermal/thermal_zone0/temp
2021.10.13 11:53:18 5: pihole: parsing: cat /proc/loadavg <- 0.00 0.00 0.00 1/123 20613
2021.10.13 11:53:18 4: pihole: sending: cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
2021.10.13 11:53:18 5: pihole: parsing: #temp1000 <- 40084
2021.10.13 11:53:18 5: pihole: parsing: #temp <- 40.084
2021.10.13 11:53:18 5: qnap: trying snmp load avg
2021.10.13 11:53:18 4: pihole: sending: cat /proc/uptime
2021.10.13 11:53:18 5: pihole: parsing: #freq1000 <- 600000
2021.10.13 11:53:18 1: PERL WARNING: Use of uninitialized value $avg_1 in concatenation (.) or string at ./FHEM/32_SYSSTAT.pm line 1193.
2021.10.13 11:53:18 1: PERL WARNING: Use of uninitialized value $avg_5 in concatenation (.) or string at ./FHEM/32_SYSSTAT.pm line 1193.
2021.10.13 11:53:18 1: PERL WARNING: Use of uninitialized value $avg_15 in concatenation (.) or string at ./FHEM/32_SYSSTAT.pm line 1193.
2021.10.13 11:53:18 5: qnap: trying snmp uptime
2021.10.13 11:53:18 5: qnap: parsing: cat /proc/uptime <- 230284.5
2021.10.13 11:53:18 5: pihole: parsing: cat /proc/uptime <- 85315.02 323931.14
2021.10.13 11:53:21 4: qnap: BlockingCall finished: SYSSTAT_BlockingCall
2021.10.13 11:54:20 5: pihole: trying /proc/loadavg
2021.10.13 11:54:20 4: pihole: sending: cat /proc/loadavg
2021.10.13 11:54:20 5: pihole: trying /proc/uptime
2021.10.13 11:54:21 4: pihole: sending: cat /sys/class/thermal/thermal_zone0/temp
2021.10.13 11:54:21 5: pihole: parsing: cat /proc/loadavg <- 0.00 0.00 0.00 1/123 20681
2021.10.13 11:54:21 4: pihole: sending: cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
2021.10.13 11:54:21 5: pihole: parsing: #temp1000 <- 40622
2021.10.13 11:54:21 5: pihole: parsing: #temp <- 40.622
2021.10.13 11:54:21 5: qnap: trying snmp load avg
2021.10.13 11:54:21 4: pihole: sending: cat /proc/uptime
2021.10.13 11:54:21 5: pihole: parsing: #freq1000 <-
2021.10.13 11:54:21 3: pihole: #freq1000:
2021.10.13 11:54:21 5: pihole: parsing: cat /proc/uptime <- 85378.01 324180.96
2021.10.13 11:54:21 1: PERL WARNING: Use of uninitialized value $avg_1 in concatenation (.) or string at ./FHEM/32_SYSSTAT.pm line 1193.
2021.10.13 11:54:21 1: PERL WARNING: Use of uninitialized value $avg_5 in concatenation (.) or string at ./FHEM/32_SYSSTAT.pm line 1193.
2021.10.13 11:54:21 1: PERL WARNING: Use of uninitialized value $avg_15 in concatenation (.) or string at ./FHEM/32_SYSSTAT.pm line 1193.
2021.10.13 11:54:21 5: qnap: trying snmp uptime
2021.10.13 11:54:21 5: qnap: parsing: cat /proc/uptime <- 230347.49
2021.10.13 11:54:24 4: qnap: BlockingCall finished: SYSSTAT_BlockingCall
2021.10.13 11:55:23 5: pihole: trying /proc/loadavg
2021.10.13 11:55:23 4: pihole: sending: cat /proc/loadavg
2021.10.13 11:55:23 5: pihole: trying /proc/uptime
2021.10.13 11:55:24 4: pihole: sending: cat /sys/class/thermal/thermal_zone0/temp
2021.10.13 11:55:24 5: pihole: parsing: cat /proc/loadavg <- 0.00 0.00 0.00 1/122 20749
2021.10.13 11:55:24 4: pihole: sending: cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
2021.10.13 11:55:24 5: qnap: trying snmp load avg
2021.10.13 11:55:24 5: pihole: parsing: #temp1000 <- 40084
2021.10.13 11:55:24 5: pihole: parsing: #temp <- 40.084
2021.10.13 11:55:24 5: qnap: trying snmp uptime
2021.10.13 11:55:24 5: qnap: parsing: cat /proc/uptime <- 230410.48
2021.10.13 11:55:24 4: pihole: sending: cat /proc/uptime
2021.10.13 11:55:24 5: pihole: parsing: #freq1000 <-
2021.10.13 11:55:24 3: pihole: #freq1000:
2021.10.13 11:55:24 5: pihole: parsing: cat /proc/uptime <- 85441.04 324430.84
2021.10.13 11:55:27 4: qnap: BlockingCall finished: SYSSTAT_BlockingCall
2021.10.13 11:56:26 5: pihole: trying /proc/loadavg
2021.10.13 11:56:26 4: pihole: sending: cat /proc/loadavg
2021.10.13 11:56:26 5: pihole: trying /proc/uptime
2021.10.13 11:56:27 4: pihole: sending: cat /sys/class/thermal/thermal_zone0/temp
2021.10.13 11:56:27 5: pihole: parsing: cat /proc/loadavg <- 0.05 0.01 0.00 1/120 20816
2021.10.13 11:56:27 4: pihole: sending: cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
2021.10.13 11:56:27 5: pihole: parsing: #temp1000 <-
2021.10.13 11:56:27 3: pihole: #temp1000:
2021.10.13 11:56:27 4: pihole: sending: cat /proc/uptime
2021.10.13 11:56:27 5: pihole: parsing: #freq1000 <- 600000
2021.10.13 11:56:27 5: qnap: trying snmp load avg
2021.10.13 11:56:27 5: pihole: parsing: cat /proc/uptime <- 85504.14 324681.22
2021.10.13 11:56:27 5: qnap: trying snmp uptime
2021.10.13 11:56:27 5: qnap: parsing: cat /proc/uptime <- 230473.63
2021.10.13 11:56:30 4: qnap: BlockingCall finished: SYSSTAT_BlockingCall
2021.10.13 11:57:29 5: pihole: trying /proc/loadavg
2021.10.13 11:57:29 4: pihole: sending: cat /proc/loadavg
2021.10.13 11:57:29 5: pihole: trying /proc/uptime
2021.10.13 11:57:30 4: pihole: sending: cat /sys/class/thermal/thermal_zone0/temp
2021.10.13 11:57:30 5: pihole: parsing: cat /proc/loadavg <- 0.02 0.01 0.00 1/121 20910
2021.10.13 11:57:30 4: pihole: sending: cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
2021.10.13 11:57:30 5: pihole: parsing: #temp1000 <- 40622
2021.10.13 11:57:30 5: pihole: parsing: #temp <- 40.622
2021.10.13 11:57:30 5: qnap: trying snmp load avg
2021.10.13 11:57:30 4: pihole: sending: cat /proc/uptime
2021.10.13 11:57:30 5: pihole: parsing: #freq1000 <- 600000
2021.10.13 11:57:30 5: qnap: trying snmp uptime
2021.10.13 11:57:30 5: qnap: parsing: cat /proc/uptime <- 230536.55
2021.10.13 11:57:30 5: pihole: parsing: cat /proc/uptime <- 85567.07 324930.64
2021.10.13 11:57:33 4: qnap: BlockingCall finished: SYSSTAT_BlockingCall

--- Ende Code ---

Hier noch die List's:


--- Code: ---Internals:
   DEF        60 600 192.168.178.12
   FUUID      5c433c80-f33f-739f-10d9-3f78e9132a084e6d
   HAS_Net::SNMP 1
   HOST       192.168.178.12
   INTERVAL   60
   INTERVAL_FS 600
   NAME       qnap
   NR         388
   NTFY_ORDER 50-qnap
   STATE      CPU: 46 C/114 F
Frei: 1.93 TB
Uptime: 2 days, 17:20:51
   SystemDescription Linux TS-X51 4.5.4
   SystemName QNAS
   TYPE       SYSSTAT
   USE_SNMP   1
   interval_fs 180
   snmpCommunity FHEM
   snmpVersion 2
   QUEUE:
   READINGS:
     2021-04-17 10:14:42   connection      disconnected
     2021-10-13 13:16:08   cpu_temp        46 C/114 F
     2021-10-13 13:16:08   cpu_usage       8.40 %
     2021-10-13 13:16:08   fan_rpm         586 RPM
     2021-10-13 13:16:08   hdd1_status     GOOD
     2021-10-13 13:16:08   hdd1_temp       43 C/109 F
     2021-10-13 13:16:08   hdd2_status     GOOD
     2021-10-13 13:16:08   hdd2_temp       43 C/109 F
     2021-10-13 13:16:08   hdd3_status     GOOD
     2021-10-13 13:16:08   hdd3_temp       42 C/107 F
     2021-10-13 13:16:08   hdd4_status     GOOD
     2021-10-13 13:16:08   hdd4_temp       41 C/105 F
     2021-10-13 13:16:08   load            noSuchObject
     2021-10-13 13:16:08   memory_free     10638.4 MB
     2021-10-13 13:16:08   memory_total    15906.7 MB
     2021-10-13 13:16:08   size_free       1.93 TB
     2021-10-13 13:16:08   state           noSuchObject noSuchObject noSuchObject
     2021-10-13 13:16:08   system_temp     47 C/117 F
     2021-10-13 13:16:08   uptime          2 days, 17:20:51
   helper:
     RUNNING_PID:
       abortFn    SYSSTAT_BlockingAborted
       bc_pid     50746
       finishFn   SYSSTAT_BlockingDone
       fn         SYSSTAT_BlockingCall
       pid        4665
       timeout    300
       abortArg:
       arg:
Attributes:
   alias      QNAP TS-451
   event-on-change-reading .*
   group      NAS
   icon       it_nas
   mibs       .1.3.6.1.4.1.24681.1.2.17.1.5.1:size_free
,.1.3.6.1.4.1.24681.1.2.5.0:cpu_temp
,.1.3.6.1.4.1.24681.1.2.1.0:cpu_usage
,.1.3.6.1.4.1.24681.1.2.6.0:system_temp
,.1.3.6.1.4.1.24681.1.2.2.0:memory_total
,.1.3.6.1.4.1.24681.1.2.3.0:memory_free
,.1.3.6.1.4.1.24681.1.2.11.1.3.1:hdd1_temp
,.1.3.6.1.4.1.24681.1.2.11.1.3.2:hdd2_temp
,.1.3.6.1.4.1.24681.1.2.11.1.3.3:hdd3_temp
,.1.3.6.1.4.1.24681.1.2.11.1.3.4:hdd4_temp
,.1.3.6.1.4.1.24681.1.2.11.1.7.1:hdd1_status
,.1.3.6.1.4.1.24681.1.2.11.1.7.2:hdd2_status
,.1.3.6.1.4.1.24681.1.2.11.1.7.3:hdd3_status
,.1.3.6.1.4.1.24681.1.2.11.1.7.4:hdd4_status
,.1.3.6.1.4.1.24681.1.2.15.1.3.1:fan_rpm
   noSSH      1
   room       Keller->Hausanschlussraum
   snmp       1
   snmpCommunity FHEM
   snmpVersion 2
   ssh_user   admin
   stateFormat CPU: cpu_temp
Frei: size_free
Uptime: uptime
   uptime     1
   verbose    0
--- Ende Code ---


--- Code: ---Internals:
   CONNECTS   17
   DEF        60 600 pi-hole.fritz.box
   FD         158
   FUUID      5d5eb4f9-f33f-d09e-fea1-ac70ba8c2d1cad75
   HAS_Net::SNMP 1
   HOST       pi-hole.fritz.box
   INTERVAL   60
   INTERVAL_FS 600
   LAST_DISCONNECT 2021-10-12 12:11:16
   NAME       pihole
   NR         629
   NTFY_ORDER 50-pihole
   PARSED     5760
   PARTIAL    90345.13 343865.81

   PID        8665
   SENT       5760
   STARTED    0
   STATE      Uptime: 1 days, 1:05:45
Temperatur: 40.6
   TYPE       SYSSTAT
   interval_fs 240
   uname      Linux pi-hole 5.10.60-v7+ #1449 SMP Wed Aug 25 15:00:01 BST 2021 armv7l GNU/Linux
   QUEUE:
   READINGS:
     2021-10-12 12:12:09   connection      connected
     2021-10-13 13:17:08   cpufreq         700
     2021-10-13 13:17:08   load            0.04
     2021-10-13 13:17:08   state           0.04 0.01 0.00
     2021-10-13 13:17:08   temperature     40.6
     2021-10-13 13:17:08   uptime          1 days, 1:05:45
   filesystems:
   helper:
     has_proc_loadavg 1
     has_proc_stat 1
     has_proc_uptime 1
Attributes:
   alias      PI-HOLE Raspberry PI
   event-on-change-reading .*
   group      Raspberry
   icon       RPi
   raspberrycpufreq 1
   raspberrytemperature 2
   room       Keller->Hausanschlussraum
   ssh_user   pi
   stateFormat Uptime: uptime
Temperatur: temperature
   uptime     1
   verbose    0
--- Ende Code ---

Ich hätte die Warnung gern aus dem Logfile, ohne dauerhaft mit verbose 0 arbeiten zu müssen - das ist jetzt meine temp. Lösung... Kann ich noch etwas liefern?

Danke Peter

Brause:
Schau mal in dein QNAP-Device, da könnte Dir der Fehler vielleicht selber auffallen.

--- Code: ---2021-10-13 13:16:08   load            noSuchObject
2021-10-13 13:16:08   state           noSuchObject noSuchObject noSuchObject

--- Ende Code ---

Dir fehlen die load-Werte

"Seit einiger Zeit..." würde ich sagen nach einem FirmwareUpdate des QNAPs.

QNAP liefert nicht alle gewünschten Werte bzw. nicht an der Stelle wo man sie erwartet.

PSI69:
@Brause

Ja, Du hast wohl Recht...
Da ich den load schon per SNMP bekomme, habe ich jetzt mal 'attr qnap load 0' gesetzt - schauen wir mal...

Gruß Peter

topa_LE:
Hallo zusammen,

habe länger das Modul mit SNMP-Abfragen der Synology nicht genutzt, da etwas nicht funktionierte wie es sollte.
Nun muss ich den Thread nochmal hochholen, weil aktuell keine automatischen Interval-Abfragen beim Setzen des noSSH Attribut mehr erfolgen.

Modulversion: 32_SYSSTAT.pm 24779 2021-07-20

Wird das SSH Attribut nicht gesetzt, erfolgen die Abfragen nach Interval, nur mit diversen Fehlermeldungen im Log.
Da ja zwingend mit aktuellem Modul (07/21) das noSSH mit 1 gesetzt werden sollte, bleibt es drin.

Um nun aktuelle Werte zu erhalten, bleibt mir nur der manuelle Abruf mit get DEVICE update.

Ist das Problem bekannt? Oder stimmt etwas nicht mir meinen Settings?

Verbose 5 spuckt kaum was aus:


--- Code: ---2021.12.24 12:09:01 5: Syn_NAS_21: trying snmp stat
2021.12.24 12:09:01 5: Syn_NAS_21: trying snmp uptime
2021.12.24 12:09:01 5: Syn_NAS_21: parsing: cat /proc/uptime <- 2514021.1
2021.12.24 12:09:01 4: Syn_NAS_21: BlockingCall finished: SYSSTAT_BlockingCall
--- Ende Code ---


List:


--- Code: ---Internals:
   DEF        60 600 192.168.178.21
   FUUID      61c322ea-f33f-252b-2f8c-f606de1cc91d3a40
   HAS_Net::SNMP 1
   HOST       192.168.178.21
   INTERVAL   60
   INTERVAL_FS 600
   NAME       Syn_NAS_21
   NR         456
   NTFY_ORDER 50-Syn_NAS_21
   STATE      Model: <span style='color:#eba15d;'>DS218j</span> | Uptime: <span style='color:#eba15d;'>28</span> Tage |
HDD-Temp: <span style='color:#eba15d;'>32 / 33</span> C° |
System-Temp: <span style='color:#eba15d;'>40</span> C°
   SystemDescription Linux Syn-DS218-8TB 3.10.108 #42218 SMP Mon Oct 18 19:14:53 CST 2021 armv7l
   SystemName DS218j-Musik-AZ
   TYPE       SYSSTAT
   USE_SNMP   1
   interval_fs 600
   snmpCommunity public
   snmpVersion 2
   OLDREADINGS:
   QUEUE:
   READINGS:
     2021-12-23 12:07:16   disk1_model     WD40EFRX-68N32N0
     2021-12-23 12:07:16   disk2_model     WD40EFRX-68N32N0
     2021-12-23 12:07:16   model           DS218j
     2021-12-23 12:07:16   state_hdd1      1
     2021-12-23 12:07:16   state_hdd2      1
     2021-12-23 12:07:16   synoSystem      DSM 7.0-42218
     2021-12-23 12:07:16   temp_hdd1       32
     2021-12-23 12:07:16   temp_hdd2       33
     2021-12-23 12:07:16   temperature     40
     2021-12-23 12:07:16   uptime          28 days, 2:18:36
     2021-12-23 12:07:16   uptime_days     28
   helper:
Attributes:
   DbLogExclude .*
   alias      Syn NAS Arbeitszimmer IP21
   event-on-change-reading .*
   group      Netzwerkspeicher
   icon       it_storage
   load       0
   mibs       .1.3.6.1.4.1.6574.1.5.1.0:model ,.1.3.6.1.4.1.6574.2.1.1.6.0:temp_hdd1 ,.1.3.6.1.4.1.6574.2.1.1.5.0:state_hdd1 ,
.1.3.6.1.4.1.6574.2.1.1.3.0:disk1_model ,.1.3.6.1.4.1.6574.1.5.3.0:synoSystem ,.1.3.6.1.4.1.6574.2.1.1.6.1:temp_hdd2 ,
.1.3.6.1.4.1.6574.2.1.1.5.1:state_hdd2 ,.1.3.6.1.4.1.6574.2.1.1.3.1:disk2_model
   noSSH      1
   room       10-Arbeitszimmer,55-Multimedia
   snmp       1
   snmpCommunity public
   snmpVersion 2
   stat       1
   stateFormat Model: <span style='color:#eba15d;'>model</span> | Uptime: <span style='color:#eba15d;'>uptime_days</span> Tage |
HDD-Temp: <span style='color:#eba15d;'>temp_hdd1 / temp_hdd2</span> C° |
System-Temp: <span style='color:#eba15d;'>temperature</span> C°
   synologytemperature 1
   uptime     1
   userReadings uptime_days { ReadingsNum("Syn_NAS_21","uptime",0)}
   verbose    5
--- Ende Code ---

Debug SNMP:


--- Code: ---debug: [200] Net::SNMP::Dispatcher::register(): added handler for descriptor [34]
debug: [462] Net::SNMP::Dispatcher::_event_insert(): modified tail [ARRAY(0x71c6118)]
debug: [535] Net::SNMP::Dispatcher::_event_delete(): deleted [ARRAY(0x757ae88)], defined new head [ARRAY(0x71c6118)]
debug: [621] Net::SNMP::Dispatcher::_event_handle(): descriptor [34] ready for read
debug: [711] Net::SNMP::Message::recv(): transport address 192.168.178.21:161
debug: [2058] Net::SNMP::Message::_buffer_dump(): 47 bytes
[0000]  30 2D 02 01  01 04 06 70  75 62 6C 69  63 A2 20 02   0-.....public. .
[0016]  04 2A D6 85  0D 02 01 00  02 01 00 30  12 30 10 06   .*.........0.0..
[0032]  08 2B 06 01  02 01 01 03  00 43 04 0E  FD 60 00      .+.......C...`.
debug: [1588] Net::SNMP::Message::_process_object_identifier(): adding leading dot
debug: [965] Net::SNMP::PDU::_process_var_bind_list(): { .1.3.6.1.2.1.1.3.0 => TimeTicks: 251486208 }
debug: [517] Net::SNMP::Dispatcher::_event_delete(): deleted [ARRAY(0x71c6118)], list is now empty
debug: [239] Net::SNMP::Dispatcher::deregister(): removed handler for descriptor [34]
2021.12.24 12:23:02 5: Syn_NAS_21: parsing: cat /proc/uptime <- 2514862.08
debug: [1065] Net::SNMP::Message::_prepare_object_identifier(): leading dot present
debug: [1065] Net::SNMP::Message::_prepare_object_identifier(): leading dot present
debug: [1065] Net::SNMP::Message::_prepare_object_identifier(): leading dot present
debug: [1065] Net::SNMP::Message::_prepare_object_identifier(): leading dot present
debug: [1065] Net::SNMP::Message::_prepare_object_identifier(): leading dot present
debug: [1065] Net::SNMP::Message::_prepare_object_identifier(): leading dot present
debug: [1065] Net::SNMP::Message::_prepare_object_identifier(): leading dot present
debug: [1065] Net::SNMP::Message::_prepare_object_identifier(): leading dot present
debug: [440] Net::SNMP::Dispatcher::_event_insert(): created new head and tail [ARRAY(0x749b918)]
debug: [687] Net::SNMP::Message::send(): transport address 192.168.178.21:161
debug: [2058] Net::SNMP::Message::_buffer_dump(): 174 bytes
[0000]  30 81 AB 02  01 01 04 06  70 75 62 6C  69 63 A0 81   0.......public..
[0016]  9D 02 04 01  43 F9 79 02  01 00 02 01  00 30 81 8E   ....C.y......0..
[0032]  30 0F 06 0B  2B 06 01 04  01 B3 2E 01  05 01 00 05   0...+...........
[0048]  00 30 10 06  0C 2B 06 01  04 01 B3 2E  02 01 01 06   .0...+..........
[0064]  00 05 00 30  10 06 0C 2B  06 01 04 01  B3 2E 02 01   ...0...+........
[0080]  01 05 00 05  00 30 10 06  0C 2B 06 01  04 01 B3 2E   .....0...+......
[0096]  02 01 01 03  00 05 00 30  0F 06 0B 2B  06 01 04 01   .......0...+....
[0112]  B3 2E 01 05  03 00 05 00  30 10 06 0C  2B 06 01 04   ........0...+...
[0128]  01 B3 2E 02  01 01 06 01  05 00 30 10  06 0C 2B 06   ..........0...+.
[0144]  01 04 01 B3  2E 02 01 01  05 01 05 00  30 10 06 0C   ............0...
[0160]  2B 06 01 04  01 B3 2E 02  01 01 03 01  05 00         +.............
debug: [200] Net::SNMP::Dispatcher::register(): added handler for descriptor [34]
debug: [462] Net::SNMP::Dispatcher::_event_insert(): modified tail [ARRAY(0x7710f38)]
debug: [535] Net::SNMP::Dispatcher::_event_delete(): deleted [ARRAY(0x749b918)], defined new head [ARRAY(0x7710f38)]
debug: [596] Net::SNMP::Dispatcher::_event_handle(): event [ARRAY(0x7710f38)], timeout = 2.9998
debug: [621] Net::SNMP::Dispatcher::_event_handle(): descriptor [34] ready for read
debug: [711] Net::SNMP::Message::recv(): transport address 192.168.178.21:161
debug: [2058] Net::SNMP::Message::_buffer_dump(): 229 bytes
[0000]  30 81 E2 02  01 01 04 06  70 75 62 6C  69 63 A2 81   0.......public..
[0016]  D4 02 04 01  43 F9 79 02  01 00 02 01  00 30 81 C5   ....C.y......0..
[0032]  30 15 06 0B  2B 06 01 04  01 B3 2E 01  05 01 00 04   0...+...........
[0048]  06 44 53 32  31 38 6A 30  11 06 0C 2B  06 01 04 01   .DS218j0...+....
[0064]  B3 2E 02 01  01 06 00 02  01 1F 30 11  06 0C 2B 06   ..........0...+.
[0080]  01 04 01 B3  2E 02 01 01  05 00 02 01  01 30 20 06   .............0 .
[0096]  0C 2B 06 01  04 01 B3 2E  02 01 01 03  00 04 10 57   .+.............W
[0112]  44 34 30 45  46 52 58 2D  36 38 4E 33  32 4E 30 30   D40EFRX-68N32N00
[0128]  1C 06 0B 2B  06 01 04 01  B3 2E 01 05  03 00 04 0D   ...+............
[0144]  44 53 4D 20  37 2E 30 2D  34 32 32 31  38 30 11 06   DSM 7.0-422180..
[0160]  0C 2B 06 01  04 01 B3 2E  02 01 01 06  01 02 01 21   .+.............!
[0176]  30 11 06 0C  2B 06 01 04  01 B3 2E 02  01 01 05 01   0...+...........
[0192]  02 01 01 30  20 06 0C 2B  06 01 04 01  B3 2E 02 01   ...0 ..+........
[0208]  01 03 01 04  10 57 44 34  30 45 46 52  58 2D 36 38   .....WD40EFRX-68
[0224]  4E 33 32 4E  30                                      N32N0
debug: [1588] Net::SNMP::Message::_process_object_identifier(): adding leading dot
debug: [1506] Net::SNMP::Message::_process_octet_string(): not translating OCTET STRING, all octets are allowed in a DisplayString
debug: [965] Net::SNMP::PDU::_process_var_bind_list(): { .1.3.6.1.4.1.6574.1.5.1.0 => OCTET STRING: DS218j }
debug: [1588] Net::SNMP::Message::_process_object_identifier(): adding leading dot
debug: [965] Net::SNMP::PDU::_process_var_bind_list(): { .1.3.6.1.4.1.6574.2.1.1.6.0 => INTEGER: 31 }
debug: [1588] Net::SNMP::Message::_process_object_identifier(): adding leading dot
debug: [965] Net::SNMP::PDU::_process_var_bind_list(): { .1.3.6.1.4.1.6574.2.1.1.5.0 => INTEGER: 1 }
debug: [1588] Net::SNMP::Message::_process_object_identifier(): adding leading dot
debug: [1506] Net::SNMP::Message::_process_octet_string(): not translating OCTET STRING, all octets are allowed in a DisplayString
debug: [965] Net::SNMP::PDU::_process_var_bind_list(): { .1.3.6.1.4.1.6574.2.1.1.3.0 => OCTET STRING: WD40EFRX-68N32N0 }
debug: [1588] Net::SNMP::Message::_process_object_identifier(): adding leading dot
debug: [1506] Net::SNMP::Message::_process_octet_string(): not translating OCTET STRING, all octets are allowed in a DisplayString
debug: [965] Net::SNMP::PDU::_process_var_bind_list(): { .1.3.6.1.4.1.6574.1.5.3.0 => OCTET STRING: DSM 7.0-42218 }
debug: [1588] Net::SNMP::Message::_process_object_identifier(): adding leading dot
debug: [965] Net::SNMP::PDU::_process_var_bind_list(): { .1.3.6.1.4.1.6574.2.1.1.6.1 => INTEGER: 33 }
debug: [1588] Net::SNMP::Message::_process_object_identifier(): adding leading dot
debug: [965] Net::SNMP::PDU::_process_var_bind_list(): { .1.3.6.1.4.1.6574.2.1.1.5.1 => INTEGER: 1 }
debug: [1588] Net::SNMP::Message::_process_object_identifier(): adding leading dot
debug: [1506] Net::SNMP::Message::_process_octet_string(): not translating OCTET STRING, all octets are allowed in a DisplayString
debug: [965] Net::SNMP::PDU::_process_var_bind_list(): { .1.3.6.1.4.1.6574.2.1.1.3.1 => OCTET STRING: WD40EFRX-68N32N0 }
debug: [517] Net::SNMP::Dispatcher::_event_delete(): deleted [ARRAY(0x7710f38)], list is now empty
debug: [239] Net::SNMP::Dispatcher::deregister(): removed handler for descriptor [34]
2021.12.24 12:23:02 4: Syn_NAS_21: BlockingCall finished: SYSSTAT_BlockingCall
--- Ende Code ---

Frohe Weihnachten  :)

Navigation

[0] Themen-Index

[*] Vorherige Sete

Zur normalen Ansicht wechseln