[GELÖST] Dooya Rolllädensteuerung

N3M3SIS · 03 Mai 2017, 21:29:59

Hi Sidey,

Ja es ist ein cc1101 Chip.
Hab auf die dev-r33 updated damit der Chip erkannt wird.
Trotzdem wird die Fernbedienung nicht erkannt.
Auch der Rollo nicht wenn ich ihn an den Strom schalte und 2xprog mache.
Bekomme ich die dooya.pm von Fhem oder muss ich die selber einspielen?

Lg

Gesendet von meinem SM-G925F mit Tapatalk

wthiess · 03 Mai 2017, 22:44:15

Ist beim update dabei.
lg
Wolfgang

N3M3SIS · 04 Mai 2017, 13:07:27

Danke wthiess für die Antwort.

Bin leider immer noch nicht am Ziel

Egal was ich drücke oder mache in der Logfile erscheint
2017.05.04 12:49:58 4: sduino: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate
2017.05.04 12:49:58 5: sduino: start pattern for MU Protocol id 16 -> Dooya shutter mismatches, aborting
2017.05.04 12:49:58 5: sduino: applying filterfunc SIGNALduino_filterSign

Außer Warema reagiert auf den Handsender oder ist das eventuell der Code ?

Code Auswählen

2017.05.04 12:49:56 4: sduino: Fingerprint for MU Protocol id 63 -> Warema matches, trying to demodulate
2017.05.04 12:49:56 5: sduino: Starting demodulation at Position 0
2017.05.04 12:49:56 5: sduino: dispatching bits: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
2017.05.04 12:49:56 4: sduino: decoded matched MU Protocol id 63 dmsg u63000000000000000 length 60 RSSI = -43
2017.05.04 12:49:56 5: sduino: converted Data to (u63000000000000000)
2017.05.04 12:49:56 5: sduino: dispatch u63000000000000000
2017.05.04 12:49:56 3: sduino: Unknown code u63000000000000000, help me!
2017.05.04 12:49:56 4: sduino: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2017.05.04 12:49:56 5: sduino: Starting demodulation at Position 8
2017.05.04 12:49:56 4: sduino/msg READ: MC;LL=-838;LH=814;SL=-407;SH=408;D=4747975EA3C753C7;C=411;L=64;R=62;
2017.05.04 12:49:56 4: sduino: Found manchester Protocol id 10 clock 411 RSSI -43 -> OSV2o3
2017.05.04 12:49:56 5: sduino: extracted data 1011100010111000011010001010000101011100001110001010110000111000 (bin)
2017.05.04 12:49:56 4: sduino: Found manchester Protocol id 11 clock 411 RSSI -43 -> AS
2017.05.04 12:49:56 5: sduino: extracted data 0100011101000111100101110101111010100011110001110101001111000111 (bin)
2017.05.04 12:49:56 4: sduino/msg READ: MC;LL=-840;LH=808;SL=-427;SH=386;D=4747975EA3C753C7;C=410;L=64;R=62;
2017.05.04 12:49:56 4: sduino: Found manchester Protocol id 10 clock 410 RSSI -43 -> OSV2o3
2017.05.04 12:49:56 5: sduino: extracted data 1011100010111000011010001010000101011100001110001010110000111000 (bin)
2017.05.04 12:49:56 4: sduino: Found manchester Protocol id 11 clock 410 RSSI -43 -> AS
2017.05.04 12:49:56 5: sduino: extracted data 0100011101000111100101110101111010100011110001110101001111000111 (bin)
2017.05.04 12:49:56 4: sduino/msg READ: MC;LL=-819;LH=817;SL=-409;SH=414;D=4747975EA3C753C7;C=409;L=64;R=62;
2017.05.04 12:49:56 4: sduino: Found manchester Protocol id 10 clock 409 RSSI -43 -> OSV2o3
2017.05.04 12:49:56 5: sduino: extracted data 1011100010111000011010001010000101011100001110001010110000111000 (bin)
2017.05.04 12:49:56 4: sduino: Found manchester Protocol id 11 clock 409 RSSI -43 -> AS
2017.05.04 12:49:56 5: sduino: extracted data 0100011101000111100101110101111010100011110001110101001111000111 (bin)
2017.05.04 12:49:57 4: sduino/msg READ: MC;LL=-816;LH=824;SL=-410;SH=416;D=4747975EA3C753C7;C=410;L=64;R=62;
2017.05.04 12:49:57 4: sduino: Found manchester Protocol id 10 clock 410 RSSI -43 -> OSV2o3
2017.05.04 12:49:57 5: sduino: extracted data 1011100010111000011010001010000101011100001110001010110000111000 (bin)
2017.05.04 12:49:57 4: sduino: Found manchester Protocol id 11 clock 410 RSSI -43 -> AS
2017.05.04 12:49:57 5: sduino: extracted data 0100011101000111100101110101111010100011110001110101001111000111 (bin)
2017.05.04 12:49:57 4: sduino/msg READ: MC;LL=-835;LH=814;SL=-407;SH=395;D=4747975EA3C753C7;C=408;L=64;R=62;
2017.05.04 12:49:57 4: sduino: Found manchester Protocol id 10 clock 408 RSSI -43 -> OSV2o3
2017.05.04 12:49:57 5: sduino: extracted data 1011100010111000011010001010000101011100001110001010110000111000 (bin)
2017.05.04 12:49:57 4: sduino: Found manchester Protocol id 11 clock 408 RSSI -43 -> AS
2017.05.04 12:49:57 5: sduino: extracted data 0100011101000111100101110101111010100011110001110101001111000111 (bin)
2017.05.04 12:49:57 4: sduino/msg READ: MC;LL=-824;LH=820;SL=-403;SH=420;D=4747975EA3C753C7;C=411;L=64;R=62;
2017.05.04 12:49:57 4: sduino: Found manchester Protocol id 10 clock 411 RSSI -43 -> OSV2o3
2017.05.04 12:49:57 5: sduino: extracted data 1011100010111000011010001010000101011100001110001010110000111000 (bin)
2017.05.04 12:49:57 4: sduino: Found manchester Protocol id 11 clock 411 RSSI -43 -> AS
2017.05.04 12:49:57 5: sduino: extracted data 0100011101000111100101110101111010100011110001110101001111000111 (bin)
2017.05.04 12:49:57 4: sduino/msg READ: MS;P0=-821;P1=827;P2=-25340;P5=-407;P6=414;P7=-4016;D=6765656560656515656565606565101010656515656560106565656565101010156560656515656015656065156565606565156265656565656565656565656565656565656565656565;CP=6;SP=7;R=59;O;
2017.05.04 12:49:57 4: sduino/msg READ: MC;LL=-841;LH=809;SL=-429;SH=392;D=51C461C;C=411;L=27;R=58;
2017.05.04 12:49:58 4: sduino/msg READ: MC;LL=-841;LH=809;SL=-429;SH=392;D=000000;C=411;L=22;R=58;
2017.05.04 12:49:58 4: sduino/msg READ: MU;P0=-841;P1=809;P2=-429;P3=392;P4=-30344;P5=-4012;D=53232323032321232323230323210101032321232323010323232323210101012323032321232301232303212323230323212344;CP=3;R=58;
2017.05.04 12:49:58 4: sduino: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate
2017.05.04 12:49:58 5: sduino: start pattern for MU Protocol id 16 -> Dooya shutter mismatches, aborting
2017.05.04 12:49:58 5: sduino: applying filterfunc SIGNALduino_filterSign

Vielleicht auch ein falsches Handsender der mit dem Dooya Modul nicht funktioniert ?
Ich lege Bilder in den Anhang mit.

Wenn der Handsender nicht geht und ich es nur über Fhem steuern möchte ist die vorgangsweise richtig ?
- Motor an den Strom und dann 2x set Rollo prog
oder
- 2x set Rollo prog und dann den Motor an den Strom
Egal wie ich es anstelle es tut sich leider nichts

Eventuell sind es auch neue Bauteile von Nobily die mit dem Dooya Modul nicht funktionieren.

Hoffe Sidey kann mir weiter helfen.

Lg

N3M3SIS

Sidey · 04 Mai 2017, 23:16:03

Betätige den Handsender noch mehrmals im Abstand von 10 Sekunden und poste uns das Log.

Grüße Sidey

N3M3SIS · 05 Mai 2017, 00:10:15

Hi Sidey,

hab den Handsender ganz nah an den Sduine gelegt und im Abstand von 10sek immer eine andere Taste gedrückt.
Hoffe kannst was damit anfangen.

Code Auswählen

2017.05.05 00:04:31 4: sduino/keepalive ok, retry = 0
2017.05.05 00:05:31 4: sduino/KeepAlive not ok, retry = 1 -> get ping
2017.05.05 00:05:32 5: sduino SW: P
2017.05.05 00:05:32 4: sduino/msg READ: OK
2017.05.05 00:05:32 5: sduino/msg READ: regexp=^OK$ cmd=ping msg=OK
2017.05.05 00:05:32 4: sduino/HandleWriteQueue: nothing to send, stopping timer
2017.05.05 00:05:38 4: sduino/msg READ: MU;P0=-626;P1=194;P6=108;P7=-21848;D=7601010101010101010101010101010101010101010101;CP=1;R=39;
2017.05.05 00:05:38 5: sduino: applying filterfunc SIGNALduino_filterSign
2017.05.05 00:05:38 4: sduino: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2017.05.05 00:05:38 5: sduino: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting
2017.05.05 00:05:38 5: sduino: applying filterfunc SIGNALduino_compPattern
2017.05.05 00:05:38 4: sduino: Fingerprint for MU Protocol id 61 -> FS10 matches, trying to demodulate
2017.05.05 00:05:38 5: sduino: Starting demodulation at Position 3
2017.05.05 00:05:38 5: sduino: applying filterfunc SIGNALduino_filterMC
2017.05.05 00:05:38 4: sduino/msg READ: MS;P0=-399;P1=414;P2=-4034;P3=-824;P4=827;P5=-24940;D=121340131043101040131043401010131043101043434010101343401343401310431043104310104340131043101510101010101010101010101010101010101010101010;CP=1;SP=2;R=47;O;
2017.05.05 00:05:38 4: sduino/msg READ: MS;P0=-414;P1=827;P2=-819;P3=407;P4=-24952;P5=-4016;D=353210323012303010323012103030323012303012121030303212103212103230123012301230301210323012303430303030303030303030303030303030303030303030;CP=3;SP=5;R=46;O;
2017.05.05 00:05:38 4: sduino/msg READ: MS;P0=-841;P1=808;P2=-436;P3=382;P4=-24954;P7=-4038;D=373012303210323212303210123232303210323210101232323010123010123032103210321032321012303210323432323232323232323232323232323232323232323232;CP=3;SP=7;R=32;O;
2017.05.05 00:05:38 4: sduino: Matched MS Protocol id 41 -> elro doorbell
2017.05.05 00:05:38 5: sduino: Starting demodulation at Position 2
2017.05.05 00:05:38 5: sduino: Found wrong signalpattern, catched 3 bits, aborting demodulation
2017.05.05 00:05:38 4: sduino/msg READ: MU;P0=-816;P1=818;P2=-406;P3=417;D=0123010123032103210321032321012303210323;CP=3;R=32;
2017.05.05 00:05:38 4: sduino: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate
2017.05.05 00:05:38 5: sduino: start pattern for MU Protocol id 16 -> Dooya shutter mismatches, aborting
2017.05.05 00:05:38 5: sduino: applying filterfunc SIGNALduino_filterSign
2017.05.05 00:05:38 4: sduino: Fingerprint for MU Protocol id 21 -> einhell garagedoor matches, trying to demodulate
2017.05.05 00:05:38 5: sduino: start pattern for MU Protocol id 21 -> einhell garagedoor mismatches, aborting
2017.05.05 00:05:38 4: sduino: Fingerprint for MU Protocol id 26 -> remote26 matches, trying to demodulate
2017.05.05 00:05:38 5: sduino: start pattern for MU Protocol id 26 -> remote26 mismatches, aborting
2017.05.05 00:05:38 4: sduino: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2017.05.05 00:05:38 5: sduino: start pattern for MU Protocol id 27 -> remote27 mismatches, aborting
2017.05.05 00:05:38 4: sduino: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2017.05.05 00:05:38 5: sduino: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting
2017.05.05 00:05:38 4: sduino: Fingerprint for MU Protocol id 29 -> HT12e remote matches, trying to demodulate
2017.05.05 00:05:38 5: sduino: start pattern for MU Protocol id 29 -> HT12e remote mismatches, aborting
2017.05.05 00:05:38 4: sduino: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2017.05.05 00:05:38 5: sduino: start pattern for MU Protocol id 30 -> unitec47031 mismatches, aborting
2017.05.05 00:05:38 4: sduino: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate
2017.05.05 00:05:38 5: sduino: Starting demodulation at Position 10
2017.05.05 00:05:38 4: sduino: Fingerprint for MU Protocol id 34 -> unknown34 matches, trying to demodulate
2017.05.05 00:05:38 5: sduino: start pattern for MU Protocol id 34 -> unknown34 mismatches, aborting
2017.05.05 00:05:38 4: sduino: Fingerprint for MU Protocol id 37 -> weather37 matches, trying to demodulate
2017.05.05 00:05:38 5: sduino: start pattern for MU Protocol id 37 -> weather37 mismatches, aborting
2017.05.05 00:05:38 5: sduino: applying filterfunc SIGNALduino_compPattern
2017.05.05 00:05:38 4: sduino: Fingerprint for MU Protocol id 40 -> romotec matches, trying to demodulate
2017.05.05 00:05:38 5: sduino: Starting demodulation at Position 2
2017.05.05 00:05:38 4: sduino: Fingerprint for MU Protocol id 49 -> quigg_gt9000 matches, trying to demodulate
2017.05.05 00:05:38 5: sduino: start pattern for MU Protocol id 49 -> quigg_gt9000 mismatches, aborting
2017.05.05 00:05:38 4: sduino: Fingerprint for MU Protocol id 59 -> AK-HD-4 matches, trying to demodulate
2017.05.05 00:05:38 5: sduino: start pattern for MU Protocol id 59 -> AK-HD-4 mismatches, aborting
2017.05.05 00:05:38 4: sduino: Fingerprint for MU Protocol id 60 -> WS2000/WS7000... matches, trying to demodulate
2017.05.05 00:05:38 5: sduino: Starting demodulation at Position 1
2017.05.05 00:05:38 4: sduino: Fingerprint for MU Protocol id 61 -> FS10 matches, trying to demodulate
2017.05.05 00:05:38 5: sduino: Starting demodulation at Position 3
2017.05.05 00:05:38 5: sduino: applying filterfunc SIGNALduino_filterMC
2017.05.05 00:05:38 4: sduino: Fingerprint for MU Protocol id 63 -> Warema matches, trying to demodulate
2017.05.05 00:05:38 5: sduino: Starting demodulation at Position 0
2017.05.05 00:05:38 4: sduino: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2017.05.05 00:05:38 5: sduino: Starting demodulation at Position 3
2017.05.05 00:05:40 3: FRITZBOX Fritzbox: Readout_Process.1837 TR-064 is switched on
2017.05.05 00:05:40 2: FRITZBOX Fritzbox: TR064_Init.4392 Cannot use TR-064. Perl modul Soap::Lite is missing on this system. Please install.
2017.05.05 00:05:48 4: sduino/msg READ: MS;P0=827;P1=-25384;P2=-820;P4=-406;P5=415;P6=-4030;D=56520452045202045204525404545204520202045454520202540254540452045204525402540254045204520154545454545454545454545454545454545454545454;CP=5;SP=6;R=23;O;
2017.05.05 00:05:48 4: sduino/msg READ: MS;P0=-418;P1=815;P2=-830;P3=398;P4=-25368;P7=-4028;D=37321032103212103210323010303210321212103030321212301230301032103210323012301230103210321430303030303030303030303030303030303030303030;CP=3;SP=7;R=32;O;
2017.05.05 00:05:48 4: sduino/msg READ: MS;P0=-817;P1=824;P2=-419;P3=403;P4=-25358;P5=-4018;D=35301230123010123012303212323012301010123232301010321032321230123012303210321032123012301432323232323232323232323232323232323232323232;CP=3;SP=5;R=32;O;
2017.05.05 00:05:49 4: sduino/msg READ: MC;LL=-812;LH=833;SL=-419;SH=414;D=49498950ADC936C9;C=412;L=64;R=32;
2017.05.05 00:05:49 4: sduino: Found manchester Protocol id 10 clock 412 RSSI -58 -> OSV2o3
2017.05.05 00:05:49 5: sduino: extracted data 1011011010110110011101101010111101010010001101101100100100110110 (bin)
2017.05.05 00:05:49 4: sduino: Found manchester Protocol id 11 clock 412 RSSI -58 -> AS
2017.05.05 00:05:49 5: sduino: extracted data 0100100101001001100010010101000010101101110010010011011011001001 (bin)
2017.05.05 00:05:49 4: sduino/msg READ: MC;LL=-812;LH=833;SL=-419;SH=414;D=FFFFC;C=412;L=18;R=32;
2017.05.05 00:05:58 4: sduino/msg READ: MU;P0=108;P1=-634;P3=-1488;P4=184;P5=-244;P6=900;P7=-3636;D=334567014141414141414141414141414141414141414141414;CP=4;R=53;
2017.05.05 00:05:58 5: sduino: applying filterfunc SIGNALduino_filterSign
2017.05.05 00:05:58 4: sduino: Fingerprint for MU Protocol id 20 -> livolo matches, trying to demodulate
2017.05.05 00:05:58 5: sduino: Starting demodulation at Position 8
2017.05.05 00:05:58 4: sduino: Fingerprint for MU Protocol id 21 -> einhell garagedoor matches, trying to demodulate
2017.05.05 00:05:58 5: sduino: start pattern for MU Protocol id 21 -> einhell garagedoor mismatches, aborting
2017.05.05 00:05:58 4: sduino: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2017.05.05 00:05:58 5: sduino: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting
2017.05.05 00:05:58 4: sduino: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2017.05.05 00:05:58 5: sduino: start pattern for MU Protocol id 30 -> unitec47031 mismatches, aborting
2017.05.05 00:05:58 4: sduino: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate
2017.05.05 00:05:58 5: sduino: Starting demodulation at Position 1
2017.05.05 00:05:58 5: sduino: applying filterfunc SIGNALduino_compPattern
2017.05.05 00:05:58 4: sduino: Fingerprint for MU Protocol id 45 -> Revolt matches, trying to demodulate
2017.05.05 00:05:58 5: sduino: start pattern for MU Protocol id 45 -> Revolt mismatches, aborting
2017.05.05 00:05:58 4: sduino: Fingerprint for MU Protocol id 61 -> FS10 matches, trying to demodulate
2017.05.05 00:05:58 5: sduino: Starting demodulation at Position 2
2017.05.05 00:05:58 5: sduino: applying filterfunc SIGNALduino_filterMC
2017.05.05 00:05:58 4: sduino: Fingerprint for MU Protocol id 63 -> Warema matches, trying to demodulate
2017.05.05 00:05:58 5: sduino: Starting demodulation at Position 0
2017.05.05 00:05:58 4: sduino/msg READ: MS;P0=-412;P1=404;P2=-4012;P3=-820;P4=826;P5=-25360;D=12134010101340134010101343101040101340134310431010434013104310401010134013434310401340101013401510101010101010101010101010101010101010101010;CP=1;SP=2;R=56;O;
2017.05.05 00:05:58 4: sduino/msg READ: MS;P0=-403;P1=421;P2=-819;P3=823;P4=-25372;P5=-4024;D=15123010101230123010101232101030101230123210321010323012103210301010123012323210301230101012301410101010101010101010101010101010101010101010;CP=1;SP=5;R=55;O;
2017.05.05 00:05:58 4: sduino/msg READ: MS;P0=-818;P1=397;P2=-435;P3=815;P4=-25376;P5=-4020;D=15103212121032103212121030121232121032103012301212303210123012321212103210303012321032121210321412121212121212121212121212121212121212121212;CP=1;SP=5;R=52;O;
2017.05.05 00:05:58 4: sduino/msg READ: MC;LL=-840;LH=820;SL=-431;SH=385;D=1712DD3612B210;C=412;L=53;R=55;
2017.05.05 00:05:58 4: sduino: Found manchester Protocol id 11 clock 412 RSSI -46.5 -> AS
2017.05.05 00:05:58 5: sduino: extracted data 00010111000100101101110100110110000100101011001000010000 (bin)
2017.05.05 00:05:58 4: sduino/msg READ: MC;LL=-820;LH=822;SL=-447;SH=404;D=485C4B74D84AC84;C=415;L=59;R=55;
2017.05.05 00:05:58 4: sduino: Found manchester Protocol id 11 clock 415 RSSI -46.5 -> AS
2017.05.05 00:05:58 5: sduino: extracted data 010010000101110001001011011101001101100001001010110010000100 (bin)
2017.05.05 00:06:08 4: sduino/msg READ: MS;P0=-821;P1=832;P2=-24964;P5=-415;P6=399;P7=-4030;D=67601560156560651560156565606510156560651015656015601065156560156015656065101010656515601565606265656565656565656565656565656565656565656565;CP=6;SP=7;R=51;O;
2017.05.05 00:06:08 4: sduino/msg READ: MC;LL=-821;LH=816;SL=-423;SH=407;D=6AE44;C=411;L=18;R=54;
2017.05.05 00:06:08 4: sduino/msg READ: MC;LL=-821;LH=816;SL=-423;SH=407;D=000000;C=411;L=22;R=54;
2017.05.05 00:06:08 4: sduino/msg READ: MC;LL=-821;LH=816;SL=-423;SH=407;D=48C868D12C48D5C88;C=411;L=65;R=54;
2017.05.05 00:06:08 4: sduino: Found manchester Protocol id 10 clock 411 RSSI -47 -> OSV2o3
2017.05.05 00:06:08 5: sduino: extracted data 10110111001101111001011100101110110100111011011100101010001101110111 (bin)
2017.05.05 00:06:08 4: sduino: Found manchester Protocol id 11 clock 411 RSSI -47 -> AS
2017.05.05 00:06:08 5: sduino: extracted data 01001000110010000110100011010001001011000100100011010101110010001000 (bin)
2017.05.05 00:06:18 4: sduino/msg READ: MU;P0=-641;P1=164;P2=212;P3=-380;P4=1212;P5=-32001;P6=-3068;D=455651010101010101010101010101010101010101010101023;CP=1;R=65;
2017.05.05 00:06:18 5: sduino: applying filterfunc SIGNALduino_filterSign
2017.05.05 00:06:18 4: sduino: Fingerprint for MU Protocol id 20 -> livolo matches, trying to demodulate
2017.05.05 00:06:18 5: sduino: Starting demodulation at Position 7
2017.05.05 00:06:18 4: sduino: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2017.05.05 00:06:18 5: sduino: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting
2017.05.05 00:06:18 5: sduino: applying filterfunc SIGNALduino_compPattern
2017.05.05 00:06:18 4: sduino: Fingerprint for MU Protocol id 61 -> FS10 matches, trying to demodulate
2017.05.05 00:06:18 5: sduino: Starting demodulation at Position 49
2017.05.05 00:06:18 5: sduino: applying filterfunc SIGNALduino_filterMC
2017.05.05 00:06:18 4: sduino: Fingerprint for MU Protocol id 63 -> Warema matches, trying to demodulate
2017.05.05 00:06:18 5: sduino: Starting demodulation at Position 0
2017.05.05 00:06:18 4: sduino/msg READ: MS;P0=414;P1=-419;P2=-4028;P3=-817;P4=826;P5=-24940;D=02010101030101434101030101410101030101014341034301014301434341010101030101430101410343410101030101430501010101010101010101010101010101010101010101;CP=0;SP=2;R=71;O;
2017.05.05 00:06:18 4: sduino/msg READ: MS;P0=424;P1=-405;P2=-822;P3=837;P4=-24938;P5=-4018;D=05010101020101323101020101310101020101013231023201013201323231010101020101320101310232310101020101320401010101010101010101010101010101010101010101;CP=0;SP=5;R=72;O;
2017.05.05 00:06:18 4: sduino/msg READ: MC;LL=-816;LH=828;SL=-397;SH=421;D=CF4BB507750E8;C=410;L=49;R=71;
2017.05.05 00:06:18 4: sduino: Found manchester Protocol id 11 clock 410 RSSI -38.5 -> AS
2017.05.05 00:06:18 5: sduino: extracted data 1100111101001011101101010000011101110101000011101000 (bin)
2017.05.05 00:06:28 4: sduino/msg READ: MS;P0=-723;P2=-417;P3=411;P4=-4014;P6=833;P7=-25360;D=34323232306062323232306060623032606232323062303232323260323260623230606230326230623062323060623732323232323232323232323232323232323232323232;CP=3;SP=4;R=65;O;
2017.05.05 00:06:29 4: sduino/msg READ: MC;LL=-824;LH=821;SL=-425;SH=397;D=0A0A9A13EE8A648A;C=411;L=64;R=71;
2017.05.05 00:06:29 4: sduino: Found manchester Protocol id 10 clock 411 RSSI -38.5 -> OSV2o3
2017.05.05 00:06:29 5: sduino: extracted data 1111010111110101011001011110110000010001011101011001101101110101 (bin)
2017.05.05 00:06:29 4: sduino: Found manchester Protocol id 11 clock 411 RSSI -38.5 -> AS
2017.05.05 00:06:29 5: sduino: extracted data 0000101000001010100110100001001111101110100010100110010010001010 (bin)
2017.05.05 00:06:29 4: sduino/msg READ: MC;LL=-824;LH=821;SL=-425;SH=397;D=0A0A9A13EE8A648A;C=411;L=64;R=71;
2017.05.05 00:06:29 4: sduino: Found manchester Protocol id 10 clock 411 RSSI -38.5 -> OSV2o3
2017.05.05 00:06:29 5: sduino: extracted data 1111010111110101011001011110110000010001011101011001101101110101 (bin)
2017.05.05 00:06:29 4: sduino: Found manchester Protocol id 11 clock 411 RSSI -38.5 -> AS
2017.05.05 00:06:29 5: sduino: extracted data 0000101000001010100110100001001111101110100010100110010010001010 (bin)
2017.05.05 00:06:31 4: sduino/keepalive ok, retry = 0
2017.05.05 00:06:38 4: sduino/msg READ: MU;P0=3008;P1=-32001;P2=244;P3=-646;P4=181;P7=-24272;D=70122343434343434343434343434343434343434343434;CP=4;R=68;
2017.05.05 00:06:38 5: sduino: applying filterfunc SIGNALduino_filterSign
2017.05.05 00:06:38 4: sduino: Fingerprint for MU Protocol id 20 -> livolo matches, trying to demodulate
2017.05.05 00:06:38 5: sduino: Starting demodulation at Position 6
2017.05.05 00:06:38 4: sduino: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2017.05.05 00:06:38 5: sduino: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting
2017.05.05 00:06:38 5: sduino: applying filterfunc SIGNALduino_compPattern
2017.05.05 00:06:38 4: sduino: Fingerprint for MU Protocol id 61 -> FS10 matches, trying to demodulate
2017.05.05 00:06:38 5: sduino: Starting demodulation at Position 4
2017.05.05 00:06:38 5: sduino: applying filterfunc SIGNALduino_filterMC
2017.05.05 00:06:38 4: sduino/msg READ: MC;LL=-813;LH=839;SL=-411;SH=416;D=FFFFFC;C=413;L=22;R=73;
2017.05.05 00:06:39 4: sduino/msg READ: MU;P0=-643;P1=178;P2=-410;P3=410;P4=-4032;P6=-7992;D=6101010101010101010101010101010101010101010101232323232323232323232323232323232323232323234323230;CP=1;R=73;
2017.05.05 00:06:39 4: sduino: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate
2017.05.05 00:06:39 5: sduino: start pattern for MU Protocol id 16 -> Dooya shutter mismatches, aborting
2017.05.05 00:06:39 5: sduino: applying filterfunc SIGNALduino_filterSign
2017.05.05 00:06:39 4: sduino: Fingerprint for MU Protocol id 20 -> livolo matches, trying to demodulate
2017.05.05 00:06:39 5: sduino: Starting demodulation at Position 3
2017.05.05 00:06:39 4: sduino: Fingerprint for MU Protocol id 24 -> visivon remote matches, trying to demodulate
2017.05.05 00:06:39 5: sduino: start pattern for MU Protocol id 24 -> visivon remote mismatches, aborting
2017.05.05 00:06:39 4: sduino: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2017.05.05 00:06:39 5: sduino: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting
2017.05.05 00:06:39 4: sduino: Fingerprint for MU Protocol id 29 -> HT12e remote matches, trying to demodulate
2017.05.05 00:06:39 5: sduino: Starting demodulation at Position 2
2017.05.05 00:06:39 4: sduino: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2017.05.05 00:06:39 5: sduino: start pattern for MU Protocol id 30 -> unitec47031 mismatches, aborting
2017.05.05 00:06:39 4: sduino: Fingerprint for MU Protocol id 34 -> unknown34 matches, trying to demodulate
2017.05.05 00:06:39 5: sduino: start pattern for MU Protocol id 34 -> unknown34 mismatches, aborting
2017.05.05 00:06:39 4: sduino: Fingerprint for MU Protocol id 37 -> weather37 matches, trying to demodulate
2017.05.05 00:06:39 5: sduino: start pattern for MU Protocol id 37 -> weather37 mismatches, aborting
2017.05.05 00:06:39 5: sduino: applying filterfunc SIGNALduino_compPattern
2017.05.05 00:06:39 4: sduino: Fingerprint for MU Protocol id 56 -> Celexon matches, trying to demodulate
2017.05.05 00:06:39 5: sduino: start pattern for MU Protocol id 56 -> Celexon mismatches, aborting
2017.05.05 00:06:39 4: sduino: Fingerprint for MU Protocol id 61 -> FS10 matches, trying to demodulate
2017.05.05 00:06:39 5: sduino: Starting demodulation at Position 47
2017.05.05 00:06:39 5: sduino: applying filterfunc SIGNALduino_filterMC
2017.05.05 00:06:39 4: sduino: Fingerprint for MU Protocol id 63 -> Warema matches, trying to demodulate
2017.05.05 00:06:39 5: sduino: Starting demodulation at Position 0
2017.05.05 00:06:39 5: sduino: dispatching bits: 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0
2017.05.05 00:06:39 4: sduino: decoded matched MU Protocol id 63 dmsg u637FFFFE0 length 28 RSSI = -37.5
2017.05.05 00:06:39 5: sduino: converted Data to (u637FFFFE0)
2017.05.05 00:06:39 5: sduino: dispatch u637FFFFE0
2017.05.05 00:06:39 3: sduino: Unknown code u637FFFFE0, help me!
2017.05.05 00:06:39 4: sduino/msg READ: MC;LL=-821;LH=832;SL=-401;SH=420;D=8086004FA4811C80;C=412;L=61;R=77;
2017.05.05 00:06:39 4: sduino: Found manchester Protocol id 10 clock 412 RSSI -35.5 -> OSV2o3
2017.05.05 00:06:39 5: sduino: extracted data 0111111101111001111111111011000001011011011111101110001101111111 (bin)
2017.05.05 00:06:39 4: sduino: Found manchester Protocol id 11 clock 412 RSSI -35.5 -> AS
2017.05.05 00:06:39 5: sduino: extracted data 1000000010000110000000000100111110100100100000010001110010000000 (bin)
2017.05.05 00:06:39 4: sduino/msg READ: MS;P0=818;P1=-413;P2=406;P3=-832;P4=-25346;P5=-4030;D=2521212301212121212123012121232101212121212121212123012321212121030123012301212121212301212321210123012121212421212121212121212121212121212121212121212121;CP=2;SP=5;R=77;O;
2017.05.05 00:06:39 4: sduino/msg READ: MU;P0=827;P1=-417;P2=408;P3=-827;D=121212103012301230121212121230121232121012301212121;CP=2;R=75;
2017.05.05 00:06:39 4: sduino: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate
2017.05.05 00:06:39 5: sduino: start pattern for MU Protocol id 16 -> Dooya shutter mismatches, aborting
2017.05.05 00:06:39 5: sduino: applying filterfunc SIGNALduino_filterSign
2017.05.05 00:06:39 4: sduino: Fingerprint for MU Protocol id 21 -> einhell garagedoor matches, trying to demodulate
2017.05.05 00:06:39 5: sduino: start pattern for MU Protocol id 21 -> einhell garagedoor mismatches, aborting
2017.05.05 00:06:39 4: sduino: Fingerprint for MU Protocol id 26 -> remote26 matches, trying to demodulate
2017.05.05 00:06:39 5: sduino: start pattern for MU Protocol id 26 -> remote26 mismatches, aborting
2017.05.05 00:06:39 4: sduino: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2017.05.05 00:06:39 5: sduino: start pattern for MU Protocol id 27 -> remote27 mismatches, aborting
2017.05.05 00:06:39 4: sduino: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2017.05.05 00:06:39 5: sduino: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting
2017.05.05 00:06:39 4: sduino: Fingerprint for MU Protocol id 29 -> HT12e remote matches, trying to demodulate
2017.05.05 00:06:39 5: sduino: start pattern for MU Protocol id 29 -> HT12e remote mismatches, aborting
2017.05.05 00:06:39 4: sduino: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2017.05.05 00:06:39 5: sduino: start pattern for MU Protocol id 30 -> unitec47031 mismatches, aborting
2017.05.05 00:06:39 4: sduino: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate
2017.05.05 00:06:39 5: sduino: Starting demodulation at Position 6
2017.05.05 00:06:39 4: sduino: Fingerprint for MU Protocol id 34 -> unknown34 matches, trying to demodulate
2017.05.05 00:06:39 5: sduino: start pattern for MU Protocol id 34 -> unknown34 mismatches, aborting
2017.05.05 00:06:39 4: sduino: Fingerprint for MU Protocol id 37 -> weather37 matches, trying to demodulate
2017.05.05 00:06:39 5: sduino: start pattern for MU Protocol id 37 -> weather37 mismatches, aborting
2017.05.05 00:06:39 5: sduino: applying filterfunc SIGNALduino_compPattern
2017.05.05 00:06:39 4: sduino: Fingerprint for MU Protocol id 40 -> romotec matches, trying to demodulate
2017.05.05 00:06:39 5: sduino: Starting demodulation at Position 27
2017.05.05 00:06:39 4: sduino: Fingerprint for MU Protocol id 49 -> quigg_gt9000 matches, trying to demodulate
2017.05.05 00:06:39 5: sduino: start pattern for MU Protocol id 49 -> quigg_gt9000 mismatches, aborting
2017.05.05 00:06:39 4: sduino: Fingerprint for MU Protocol id 59 -> AK-HD-4 matches, trying to demodulate
2017.05.05 00:06:39 5: sduino: start pattern for MU Protocol id 59 -> AK-HD-4 mismatches, aborting
2017.05.05 00:06:39 4: sduino: Fingerprint for MU Protocol id 60 -> WS2000/WS7000... matches, trying to demodulate
2017.05.05 00:06:39 5: sduino: Starting demodulation at Position 9
2017.05.05 00:06:39 4: sduino: Fingerprint for MU Protocol id 61 -> FS10 matches, trying to demodulate
2017.05.05 00:06:39 5: sduino: Starting demodulation at Position 1
2017.05.05 00:06:39 5: sduino: applying filterfunc SIGNALduino_filterMC
2017.05.05 00:06:39 4: sduino: Fingerprint for MU Protocol id 63 -> Warema matches, trying to demodulate
2017.05.05 00:06:39 5: sduino: Starting demodulation at Position 0
2017.05.05 00:06:39 5: sduino: dispatching bits: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
2017.05.05 00:06:39 4: sduino: decoded matched MU Protocol id 63 dmsg u630000000 length 28 RSSI = -36.5
2017.05.05 00:06:39 5: sduino: converted Data to (u630000000)
2017.05.05 00:06:39 5: sduino: dispatch u630000000
2017.05.05 00:06:39 3: sduino: Unknown code u630000000, help me!
2017.05.05 00:06:39 4: sduino: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2017.05.05 00:06:39 5: sduino: Starting demodulation at Position 7
2017.05.05 00:06:39 4: sduino/msg READ: MC;LL=-826;LH=819;SL=-435;SH=398;D=0218013E9204720;C=412;L=59;R=79;
2017.05.05 00:06:39 4: sduino: Found manchester Protocol id 11 clock 412 RSSI -34.5 -> AS
2017.05.05 00:06:39 5: sduino: extracted data 000000100001100000000001001111101001001000000100011100100000 (bin)
2017.05.05 00:06:39 4: sduino/msg READ: MC;LL=-826;LH=819;SL=-435;SH=398;D=0218013E9204720;C=412;L=59;R=79;
2017.05.05 00:06:39 4: sduino: Found manchester Protocol id 11 clock 412 RSSI -34.5 -> AS
2017.05.05 00:06:39 5: sduino: extracted data 000000100001100000000001001111101001001000000100011100100000 (bin)
2017.05.05 00:06:40 4: sduino/msg READ: MC;LL=-824;LH=823;SL=-411;SH=409;D=FFFFF8;C=411;L=21;R=76;
2017.05.05 00:06:40 4: sduino/msg READ: MC;LL=-824;LH=823;SL=-411;SH=409;D=1010C009F4902390;C=411;L=64;R=76;
2017.05.05 00:06:40 4: sduino: Found manchester Protocol id 10 clock 411 RSSI -36 -> OSV2o3
2017.05.05 00:06:40 5: sduino: extracted data 1110111111101111001111111111011000001011011011111101110001101111 (bin)
2017.05.05 00:06:40 4: sduino: Found manchester Protocol id 11 clock 411 RSSI -36 -> AS
2017.05.05 00:06:40 5: sduino: extracted data 0001000000010000110000000000100111110100100100000010001110010000 (bin)
2017.05.05 00:06:48 4: sduino/msg READ: MU;P0=852;P1=415;P2=169;P4=-394;P5=-633;P6=3744;P7=-32001;D=4567705177252525252525252525252525252525252525252525241414141414141414141414141414141414141414141;CP=2;R=75;
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: start pattern for MU Protocol id 16 -> Dooya shutter mismatches, aborting
2017.05.05 00:06:48 5: sduino: applying filterfunc SIGNALduino_filterSign
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 20 -> livolo matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: Starting demodulation at Position 7
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 24 -> visivon remote matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: start pattern for MU Protocol id 24 -> visivon remote mismatches, aborting
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: start pattern for MU Protocol id 27 -> remote27 mismatches, aborting
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 29 -> HT12e remote matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: start pattern for MU Protocol id 29 -> HT12e remote mismatches, aborting
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: start pattern for MU Protocol id 30 -> unitec47031 mismatches, aborting
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 34 -> unknown34 matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: start pattern for MU Protocol id 34 -> unknown34 mismatches, aborting
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 37 -> weather37 matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: start pattern for MU Protocol id 37 -> weather37 mismatches, aborting
2017.05.05 00:06:48 5: sduino: applying filterfunc SIGNALduino_compPattern
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 40 -> romotec matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: Starting demodulation at Position 2
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 56 -> Celexon matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: start pattern for MU Protocol id 56 -> Celexon mismatches, aborting
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 61 -> FS10 matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: Starting demodulation at Position 54
2017.05.05 00:06:48 5: sduino: applying filterfunc SIGNALduino_filterMC
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 63 -> Warema matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: Starting demodulation at Position 0
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: Starting demodulation at Position 5
2017.05.05 00:06:48 4: sduino/msg READ: MC;LL=-805;LH=824;SL=-412;SH=421;D=51D111C83551B3518;C=410;L=65;R=77;
2017.05.05 00:06:48 4: sduino: Found manchester Protocol id 10 clock 410 RSSI -35.5 -> OSV2o3
2017.05.05 00:06:48 5: sduino: extracted data 10101110001011101110111000110111110010101010111001001100101011100111 (bin)
2017.05.05 00:06:48 4: sduino: Found manchester Protocol id 11 clock 410 RSSI -35.5 -> AS
2017.05.05 00:06:48 5: sduino: extracted data 01010001110100010001000111001000001101010101000110110011010100011000 (bin)
2017.05.05 00:06:48 4: sduino/msg READ: MC;LL=-814;LH=836;SL=-395;SH=389;D=FFFFFC;C=405;L=22;R=73;
2017.05.05 00:06:48 4: sduino/msg READ: MU;P0=822;P1=-25354;P4=-832;P5=-401;P6=420;D=540455650565640465656565056564656505656564656504656565056465650564046565056405656404056404656501;CP=6;R=82;
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: start pattern for MU Protocol id 16 -> Dooya shutter mismatches, aborting
2017.05.05 00:06:48 5: sduino: applying filterfunc SIGNALduino_filterSign
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 21 -> einhell garagedoor matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: start pattern for MU Protocol id 21 -> einhell garagedoor mismatches, aborting
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 26 -> remote26 matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: start pattern for MU Protocol id 26 -> remote26 mismatches, aborting
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: start pattern for MU Protocol id 27 -> remote27 mismatches, aborting
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 29 -> HT12e remote matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: start pattern for MU Protocol id 29 -> HT12e remote mismatches, aborting
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: start pattern for MU Protocol id 30 -> unitec47031 mismatches, aborting
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: Starting demodulation at Position 7
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 34 -> unknown34 matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: start pattern for MU Protocol id 34 -> unknown34 mismatches, aborting
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 37 -> weather37 matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: start pattern for MU Protocol id 37 -> weather37 mismatches, aborting
2017.05.05 00:06:48 5: sduino: applying filterfunc SIGNALduino_compPattern
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 40 -> romotec matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: Starting demodulation at Position 8
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 49 -> quigg_gt9000 matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: start pattern for MU Protocol id 49 -> quigg_gt9000 mismatches, aborting
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 59 -> AK-HD-4 matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: start pattern for MU Protocol id 59 -> AK-HD-4 mismatches, aborting
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 60 -> WS2000/WS7000... matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: Starting demodulation at Position 8
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 61 -> FS10 matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: Starting demodulation at Position 6
2017.05.05 00:06:48 5: sduino: applying filterfunc SIGNALduino_filterMC
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 63 -> Warema matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: Starting demodulation at Position 0
2017.05.05 00:06:48 5: sduino: dispatching bits: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
2017.05.05 00:06:48 4: sduino: decoded matched MU Protocol id 63 dmsg u63000000000000 length 48 RSSI = -33
2017.05.05 00:06:48 5: sduino: converted Data to (u63000000000000)
2017.05.05 00:06:48 5: sduino: dispatch u63000000000000
2017.05.05 00:06:48 3: sduino: Unknown code u63000000000000, help me!
2017.05.05 00:06:48 4: sduino: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2017.05.05 00:06:48 5: sduino: Starting demodulation at Position 2
2017.05.05 00:06:49 4: sduino/msg READ: MC;LL=-821;LH=818;SL=-409;SH=412;D=F1C3BCE5C8A5C;C=409;L=50;R=85;
2017.05.05 00:06:49 4: sduino: Found manchester Protocol id 11 clock 409 RSSI -31.5 -> AS
2017.05.05 00:06:49 5: sduino: extracted data 1111000111000011101111001110010111001000101001011100 (bin)
2017.05.05 00:06:49 4: sduino/msg READ: MC;LL=-880;LH=818;SL=-409;SH=412;D=717C70EF3972297;C=419;L=60;R=85;
2017.05.05 00:06:49 4: sduino: Found manchester Protocol id 11 clock 419 RSSI -31.5 -> AS
2017.05.05 00:06:49 5: sduino: extracted data 011100010111110001110000111011110011100101110010001010010111 (bin)
2017.05.05 00:06:49 4: sduino/msg READ: MC;LL=-831;LH=815;SL=-414;SH=407;D=E2F8E1DE72E452E;C=411;L=59;R=85;
2017.05.05 00:06:49 4: sduino: Found manchester Protocol id 11 clock 411 RSSI -31.5 -> AS
2017.05.05 00:06:49 5: sduino: extracted data 111000101111100011100001110111100111001011100100010100101110 (bin)
2017.05.05 00:06:49 4: sduino/msg READ: MC;LL=-822;LH=819;SL=-403;SH=421;D=717C70EF3972297;C=410;L=60;R=85;
2017.05.05 00:06:49 4: sduino: Found manchester Protocol id 11 clock 410 RSSI -31.5 -> AS
2017.05.05 00:06:49 5: sduino: extracted data 011100010111110001110000111011110011100101110010001010010111 (bin)
2017.05.05 00:06:49 4: sduino/msg READ: MC;LL=-832;LH=814;SL=-407;SH=412;D=FFFFF8;C=410;L=21;R=85;
2017.05.05 00:06:49 4: sduino/msg READ: MC;LL=-832;LH=814;SL=-407;SH=412;D=1717C70EF3972297;C=410;L=64;R=85;
2017.05.05 00:06:49 4: sduino: Found manchester Protocol id 10 clock 410 RSSI -31.5 -> OSV2o3
2017.05.05 00:06:49 5: sduino: extracted data 1110100011101000001110001111000100001100011010001101110101101000 (bin)
2017.05.05 00:06:49 4: sduino: Found manchester Protocol id 11 clock 410 RSSI -31.5 -> AS
2017.05.05 00:06:49 5: sduino: extracted data 0001011100010111110001110000111011110011100101110010001010010111 (bin)
2017.05.05 00:06:58 4: sduino/msg READ: MU;P1=-4055;P3=1246;P4=-20870;P5=-656;P6=-31998;P7=170;D=346646663661757575757575757575757575757575757575757575757;CP=7;R=76;
2017.05.05 00:06:58 5: sduino: applying filterfunc SIGNALduino_filterSign
2017.05.05 00:06:58 4: sduino: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2017.05.05 00:06:58 5: sduino: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting
2017.05.05 00:06:58 5: sduino: applying filterfunc SIGNALduino_compPattern
2017.05.05 00:06:58 4: sduino: Fingerprint for MU Protocol id 61 -> FS10 matches, trying to demodulate
2017.05.05 00:06:58 5: sduino: Starting demodulation at Position 12
2017.05.05 00:06:58 5: sduino: applying filterfunc SIGNALduino_filterMC
2017.05.05 00:06:58 4: sduino: Fingerprint for MU Protocol id 63 -> Warema matches, trying to demodulate
2017.05.05 00:06:58 5: sduino: Starting demodulation at Position 0
2017.05.05 00:06:58 4: sduino/msg READ: MU;P0=-408;P1=400;P2=-4032;D=010101010101010101010101010101010101010101012101;CP=1;R=79;
2017.05.05 00:06:58 5: sduino: applying filterfunc SIGNALduino_filterSign
2017.05.05 00:06:58 4: sduino: Fingerprint for MU Protocol id 29 -> HT12e remote matches, trying to demodulate
2017.05.05 00:06:58 5: sduino: start pattern for MU Protocol id 29 -> HT12e remote mismatches, aborting
2017.05.05 00:06:58 4: sduino: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2017.05.05 00:06:58 5: sduino: start pattern for MU Protocol id 30 -> unitec47031 mismatches, aborting
2017.05.05 00:06:58 4: sduino: Fingerprint for MU Protocol id 34 -> unknown34 matches, trying to demodulate
2017.05.05 00:06:58 5: sduino: start pattern for MU Protocol id 34 -> unknown34 mismatches, aborting
2017.05.05 00:06:58 4: sduino: Fingerprint for MU Protocol id 37 -> weather37 matches, trying to demodulate
2017.05.05 00:06:58 5: sduino: start pattern for MU Protocol id 37 -> weather37 mismatches, aborting
2017.05.05 00:06:58 5: sduino: applying filterfunc SIGNALduino_compPattern
2017.05.05 00:06:58 4: sduino: Fingerprint for MU Protocol id 56 -> Celexon matches, trying to demodulate
2017.05.05 00:06:58 5: sduino: start pattern for MU Protocol id 56 -> Celexon mismatches, aborting
2017.05.05 00:06:58 4: sduino: Fingerprint for MU Protocol id 61 -> FS10 matches, trying to demodulate
2017.05.05 00:06:58 5: sduino: Starting demodulation at Position 1
2017.05.05 00:06:58 5: sduino: applying filterfunc SIGNALduino_filterMC
2017.05.05 00:06:58 4: sduino: Fingerprint for MU Protocol id 63 -> Warema matches, trying to demodulate
2017.05.05 00:06:58 5: sduino: Starting demodulation at Position 0
2017.05.05 00:06:59 4: sduino/msg READ: MC;LL=-817;LH=832;SL=-410;SH=405;D=00000;C=410;L=20;R=85;
2017.05.05 00:06:59 4: sduino/msg READ: MC;LL=-817;LH=832;SL=-410;SH=405;D=2928891AE02944298;C=410;L=65;R=85;
2017.05.05 00:06:59 4: sduino: Found manchester Protocol id 10 clock 410 RSSI -31.5 -> OSV2o3
2017.05.05 00:06:59 5: sduino: extracted data 11010110110101110111011011100101000111111101011010111011110101100111 (bin)
2017.05.05 00:06:59 4: sduino: Found manchester Protocol id 11 clock 410 RSSI -31.5 -> AS
2017.05.05 00:06:59 5: sduino: extracted data 00101001001010001000100100011010111000000010100101000100001010011000 (bin)

Lg

N3M3SIS

Umsteiger · 05 Mai 2017, 13:37:19

Hallo zusammen,

Bin ganz neue und steige von Everhome auf fhem um. Klappt soweit gut nur happerts gerade an meinen E-Rollos von Rohrmotor24 (RMF-Serie).
Ich habe mir den Thread durchgelesen aber komm noch nicht ganz klar.
Aktuell habe ich einen Rasp3 + Cul433 (Busware) + Cul868 (Busware) + ZWave Stick im Einsatz.
Die Motoren stuere ich aktuell über Everhome und über den 15-Kanal Handender.

Benötige ich noch weitere Hardware um die Motoren zu steuern? Habe etwas vom Signaludino gelesen.

Kann mir jemand eine kleine Howto zur Verfügung stellen? Wäre wirklich klasse!!!

Vielen Dank schonmal

N3M3SIS · 05 Mai 2017, 13:46:41

Hi Umsteiger,

bei mir klappst noch nicht aber ich kann dir sagen um die Motoren zu steuern benötigst du um das Dooya Modul zu steuern die Hardware Signalduino.

LG

N3M3SIS

Gesendet von meinem SM-G925F mit Tapatalk

wthiess · 05 Mai 2017, 15:11:19

Hier lesen.

https://forum.fhem.de/index.php/topic,49523.0.html

Lg
Wolfgang

Sidey · 05 Mai 2017, 21:25:09

Zitat von: N3M3SIS am 05 Mai 2017, 00:10:15
hab den Handsender ganz nah an den Sduine gelegt und im Abstand von 10sek immer eine andere Taste gedrückt.

Ich habe mir die Logs angesehen. Dein Sender verwendet eine andere Modulation. Die Daten sind Manchester Codiert.
Prinzipiell erst mal noch kein Problem, die Daten werden auch bereits demoduliert:

Code Auswählen


    1000000010000110000000000100111110100100100000010001110010000000 
        000000100001100000000001001111101001001000000100011100100000
 0000101000001010100110100001001111101110100010100110010010001010
0001000000010000110000000000100111110100100100000010001110010000

010010000101110001001011011101001101100001001010110010000100
01001000110010000110100011010001001011000100100011010101110010001000
1100111101001011101101010000011101110101000011101000
01010001110100010001000111001000001101010101000110110011010100011000
1111000111000011101111001110010111001000101001011100
011100010111110001110000111011110011100101110010001010010111
0001011100010111110001110000111011110011100101110010001010010111
00101001001010001000100100011010111000000010100101000100001010011000

Da tauchen auch mal ähnliche Daten auf, aber so direkt erkenne ich kaum Zusammenhänge.

Mit der bestehenden Dooya Implementierung hat das erst mal wenig zu tun. Das müsste jemand genauer untersuchen, wann sich da was ändert.

Grüße Sidey

N3M3SIS · 05 Mai 2017, 21:32:56

Es liegt aber nicht am Sduino was ich verwende oder?
Und wer sollte das genauer untersuchen?
An wen kann ich mich wenden?

Lg

Gesendet von meinem SM-G925F mit Tapatalk

Sidey · 05 Mai 2017, 23:17:26

Welche Version des Signalduino hast Du installiert?

Genauer untersuchen kann das jemand, der diese Sender verwendet. Z.B. Du.

Gesendet von meinem Nexus 5 mit Tapatalk

N3M3SIS · 05 Mai 2017, 23:19:45

Hehe dafür sollte man aber auch Ahnung haben was man tut 😁

Ich habe die Version 3.3.1

Gesendet von meinem SM-G925F mit Tapatalk

N3M3SIS · 06 Mai 2017, 22:45:06

Hi Jarnsen

du solltest eventuell im ersten Beitrag aufnehmen das Dooya nicht mit allen Nobily geht.
Weil ich habe mir nur Nobily gekauft weil ich dachte die funktionieren mit Fhem.

Lg

Gesendet von meinem SM-G925F mit Tapatalk

RaspiLED · 07 Mai 2017, 18:21:54

Hi,
na dann nehmen wir Dich doch nochmal an die Hand.

Wir fangen langsam an:

Wir müssen folgende Fragen klären:
1) Wie ist das Protokoll aufgebaut. Kein Dooya aber Manchester Codiert, aber ändert sich die Länge und was bedeuten die Bits. Hat jede Taste einen klaren Code oder ändern sich die Nachrichten w/ Rolling Code oder Verschlüsselung? Sind die Tasten bei langem Drücken anders als bei kurzem Druck?
2) Also müssen wir systematisch ran: Wir brauchen zwei Logeinträge im Abstand von ein paar Minuten von jeder Taste im Paar. Also A drücken Log genau davon speichern, dann 5 Minuten warten, dann A drücken und dazu speichern. Das kann jetzt für jede Taste wiederholt werden (oder Du schreibst sauber zu den Zeiten in das Log welche Taste wie gedrückt wurde!).

Dann schauen wir uns die Nachrichten jeweils im Vergleich an.
a) Die Nachrichten sind exakt gleich -> Kein rolling code, keine Verschlüsselung mit zeitanteil
b) Es gab Änderungen:
b1) Nur wenige Stellen -> Könnte Rolling Code sein -> Mehr dokumentierte Logs zu einer Taste um Code zu verstehen notwendig
b2) Vielen Stellen sind anders -> Könnte Verschlüsselung sein -> Sehr schwierig ohne Bilder vom Innenleben der Fernbedienung-> Auch dann eher versuche Die Fernbedienung anders auszulesen sinnvoll...

Kurzum: Ich hoffe auf b1, aber wir brauchen dokumentiertes Log Futter. Am besten als ZIP Datei.
@Sidey oder Ralf9: Habe ich was vergessen?

Gruß Arnd

N3M3SIS · 07 Mai 2017, 20:46:15

Hi Arnd,

ich habe mal deine Tipps befolgt und habe die gedrückten Tasten mitgeloggt.
Danke an alle die mir versuchen zu helfen.
Hoffe Ihr könnt damit was anfangen.

Lg

N3M3SIS