[FHZ] Open Firmware 868MHz Transceiver

[tostmann]

                                                 

The main aim of this project is to create a open hardware platform
based on TI CC1100 RF-transceiver. This transceiver (sender and
receiver) is capable of doing AM and FM modulation, therefor its
suitable for all the ELV protocols including BidCos.

For now its intended to re-purpose an EM1010 or WS50 case, just
because they look nice ...

The PCB design has been finished. Now I'm waiting for this first
prototype-PCB to get ready.

The current features of the board:

868MHz CC1100 Transceiver with Ceramic antenna
11MHz ATmega644 @ 3,3V - JTAG/ISP connector
additional 16MBit Flash
MicroSD Slot
buffered RealTimeClock
seriell FTDI USB Interface
Li-Ion Battery 1450 mAh incl. charging logic via USB connector
illuminated 128x64 Graphic display - (White- /Blue-LED Current source
on board) - see: http://electronic-assembly.de/deu/dog/dog.htm
analog, resistive Touchscreen for Display
the three buttons and the buzzer
and finally a Dual-TopLED (red/green)

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "FHZ1000 users on Linux" group.
To post to this group, send email to FHZ1000-users-on-unix@googlegroups.com
To unsubscribe from this group, send email to FHZ1000-users-on-unix-unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/FHZ1000-users-on-unix?hl=en
-~----------~----~----~----~------~----~------~--~-

[tostmann]

                                                 

See the progress on hardware:

http://web.mac.com/tostmann/iWeb/FHZ-Umbau/Prototyp.html

Now its time to start coding ...

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "FHZ1000 users on Linux" group.
To post to this group, send email to FHZ1000-users-on-unix@googlegroups.com
To unsubscribe from this group, send email to FHZ1000-users-on-unix-unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/FHZ1000-users-on-unix?hl=en
-~----------~----~----~----~------~----~------~--~-