RFXtrx433E: FHEM Sendet HOMEEASY aber empfängt nichts mehr

[Timmy.m]

Hallo!

Habe ich etwas nicht mitbekommen. Seid einigen Wochen empfängt  mein RFXtrx433E zwar diverse Protokolle, aber über HOMEEASY kommt nichts mehr.
Ich kann aber noch immer meine Homeeasy Steckdosen steuern. Die Bewegungsmelder senden auch, ich kann die Datenpakete über den Laptop empfangen, nur in FHEM kommt nichts an.

Code Auswählen Erweitern

Internals:
   DEF        /dev/serial/by-id/usb-RFXCOM_RFXtrx433_A1Y076GL-if00-port0@38400
   DeviceName /dev/serial/by-id/usb-RFXCOM_RFXtrx433_A1Y076GL-if00-port0@38400
   FD         9
   NAME       TRX_2
   NR         18
   PARTIAL
   RAWMSG     0a520744210e00f33f0179
   STATE      Initialized
   TRX_2_MSGCNT 71
   TRX_2_TIME 2016-08-23 22:54:37
   TYPE       TRX
   Readings:
     2016-08-23 22:54:37   state           Initialized
Attributes:
   group      Hardware
   icon       cul_usb
   longids    1
   room       System
   rssi       1

Code Auswählen Erweitern

2016.08.23 22:23:26 3: telnetPort: port 7072 opened
2016.08.23 22:23:27 3: WEB: port 8083 opened
2016.08.23 22:23:27 2: eventTypes: loaded 343 events from ./log/eventTypes.txt
2016.08.23 22:23:27 3: Opening TRX_2 device /dev/serial/by-id/usb-RFXCOM_RFXtrx433_A1Y076GL-if00-port0
2016.08.23 22:23:27 3: Can't open /dev/serial/by-id/usb-RFXCOM_RFXtrx433_A1Y076GL-if00-port0: Datei oder Verzeichnis nicht gefunden
2016.08.23 22:23:28 3: Opening myJeeLink device /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A100ARHR-if00-port0
2016.08.23 22:23:28 3: Setting myJeeLink serial parameters to 57600,8,N,1
2016.08.23 22:23:29 3: myJeeLink device opened
2016.08.23 22:23:30 3: EMT7110_54B5: I/O device is myJeeLink
2016.08.23 22:23:30 3: EMT7110_549E: I/O device is myJeeLink
2016.08.23 22:23:30 3: EMT7110_5441: I/O device is myJeeLink
2016.08.23 22:23:30 3: EMT7110_5492: I/O device is myJeeLink
2016.08.23 22:23:30 3: LaCrosse_16: I/O device is myJeeLink
2016.08.23 22:23:30 3: LaCrosse_26: I/O device is myJeeLink
2016.08.23 22:23:31 1: Including ./log/fhem.save
2016.08.23 22:23:31 1: usb create starting
2016.08.23 22:23:33 3: Probing CUL device /dev/ttyAMA0
2016.08.23 22:23:33 3: Can't open /dev/ttyAMA0: Keine Berechtigung
2016.08.23 22:23:33 1: usb create end
2016.08.23 22:23:33 1: PERL WARNING: Use of uninitialized value in pattern match (m//) at ./FHEM/36_JeeLink.pm line 363.
2016.08.23 22:23:33 2: SecurityCheck:  WEB has no associated allowed device with basicAuth. telnetPort has no associated allowed device with password/globalpassword.  Restart FHEM for a new check if the problem is fixed, or set the global attribute motd to none to supress this message.
2016.08.23 22:23:33 0: Featurelevel: 5.7
2016.08.23 22:23:33 0: Server started with 145 defined entities (fhem.pl:12022/2016-08-21 perl:5.020002 os:linux user:fhem pid:25261)
2016.08.23 22:33:08 3: Setting TRX_2 serial parameters to 38400,8,N,1
2016.08.23 22:33:10 1: TRX: Initialization Error: No character read
2016.08.23 22:33:10 1: Cannot init /dev/serial/by-id/usb-RFXCOM_RFXtrx433_A1Y076GL-if00-port0, ignoring it (TRX_2)
2016.08.23 22:35:00 3: Opening TRX_2 device /dev/serial/by-id/usb-RFXCOM_RFXtrx433_A1Y076GL-if00-port0
2016.08.23 22:35:00 3: Setting TRX_2 serial parameters to 38400,8,N,1
2016.08.23 22:35:03 1: TRX: Initialization Error: No character read
2016.08.23 22:35:03 1: Cannot init /dev/serial/by-id/usb-RFXCOM_RFXtrx433_A1Y076GL-if00-port0, ignoring it (TRX_2)
2016.08.23 22:35:47 3: Opening TRX_2 device /dev/serial/by-id/usb-RFXCOM_RFXtrx433_A1Y076GL-if00-port0
2016.08.23 22:35:47 3: Setting TRX_2 serial parameters to 38400,8,N,1
2016.08.23 22:35:50 1: TRX: Initialization Error: No character read
2016.08.23 22:35:50 1: Cannot init /dev/serial/by-id/usb-RFXCOM_RFXtrx433_A1Y076GL-if00-port0, ignoring it (TRX_2)
2016.08.23 22:35:53 3: Opening TRX_2 device /dev/serial/by-id/usb-RFXCOM_RFXtrx433_A1Y076GL-if00-port0
2016.08.23 22:35:53 3: Setting TRX_2 serial parameters to 38400,8,N,1
2016.08.23 22:35:56 1: TRX: Initialization Error: No character read
2016.08.23 22:35:56 1: Cannot init /dev/serial/by-id/usb-RFXCOM_RFXtrx433_A1Y076GL-if00-port0, ignoring it (TRX_2)
2016.08.23 22:39:49 0: Server shutdown
2016.08.23 22:40:04 1: Including fhem.cfg
2016.08.23 22:40:05 3: telnetPort: port 7072 opened
2016.08.23 22:40:06 3: WEB: port 8083 opened
2016.08.23 22:40:07 2: eventTypes: loaded 344 events from ./log/eventTypes.txt
2016.08.23 22:40:07 3: Opening TRX_2 device /dev/serial/by-id/usb-RFXCOM_RFXtrx433_A1Y076GL-if00-port0
2016.08.23 22:40:07 3: Setting TRX_2 serial parameters to 38400,8,N,1
2016.08.23 22:40:10 1: TRX: Init OK
2016.08.23 22:40:10 1: TRX: Init status: '433.92MHz transceiver, firmware=1006, protocols enabled: RFU ByronSX Lighting4 FineOffset/Viking Rubicson AE/Blyss LaCrosse Hideki LightwaveRF Mertik Visonic OREGON KOPPLA HOMEEASY AC '
2016.08.23 22:40:10 3: TRX_2 device opened

Vielleicht kann mir jemand einen Tipp geben. Danke.

Grüße Tim

[Timmy.m]

Problem ist behoben... war ein Wackelkontakt an der Antenne.