Autor Thema: [gelöst] SIGNALduino: REV Fernbedienung wird nicht erkannt IT-V1, tristate  (Gelesen 679 mal)

Offline Ellert

  • Developer
  • Hero Member
  • ****
  • Beiträge: 3593
Nach dem ich meinen nanoCUL abgeschaltet hatte, musste ich feststellen, dass nicht alle meine IT-V1 STeckdosen (von REV) durch den SD geschaltet wurden und die Handsender/Fernbedienungen nicht erkannt wurden.

Auf dem TestPi habe ich einen nanoCUL und einen SD.

Der CUL legt die Geräte über das IT-Modul an, der SD nicht.
Über den CUL kann ich die Geräte mit der Fernbedienung schalten, mit dem SD nicht.

Die Steckdose hat die Besonderheit, dass die Taste der Fernbedienung sie toggelt.

Ich habe den Handsender 1x bedient und mit  CUL und SD das Ergebnis geloggt.

Zitat
2016.10.05 17:36:04 5: CUL/RAW: /i050514
2016.10.05 17:36:04 5: CUL/RAW: i050514/0B

2016.10.05 17:36:04 4: CUL_Parse: nanoCUL433 i0505140B -68.5
2016.10.05 17:36:04 5: nanoCUL433 dispatch i050514
2016.10.05 17:36:04 4: nanoCUL433 IT: message "i050514" (7)
2016.10.05 17:36:04 4: nanoCUL433 IT: msgcode "00FF00FF0FF0" (12) bin = 000001010000010100010100
2016.10.05 17:36:04 5: nanoCUL433 IT: V1 housecode = 00FF00FF0F  onoffcode = F0
2016.10.05 17:36:04 3: nanoCUL433 IT: IT_00FF00FF0F off->off
2016.10.05 17:36:04 4: SD_433/msg READ: MU;P0=-10312;P1=171;P2=-479;P5=-1138;P6=820;D=51510151515151562156215151515156215621515156215621515101515151515621562151515151562156215151562156215151015151515156215621515151515621562151515621562151510151515151562156215151515156215621515156215621515101515151515621562151515156262626262626262156215621;CP=1;O;
2016.10.05 17:36:04 5: SD_433: applying filterfunc SIGNALduino_filterSign
2016.10.05 17:36:04 4: SD_433: Fingerprint for MU Protocol id 21 -> einhell garagedoor matches, trying to demodulate
2016.10.05 17:36:04 5: SD_433: Starting demodulation at Position 2
2016.10.05 17:36:04 4: SD_433: Fingerprint for MU Protocol id 26 -> remote26 matches, trying to demodulate
2016.10.05 17:36:04 5: SD_433: Starting demodulation at Position 2
2016.10.05 17:36:04 4: SD_433: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2016.10.05 17:36:04 5: SD_433: Starting demodulation at Position 2
2016.10.05 17:36:04 4: SD_433: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2016.10.05 17:36:04 5: SD_433: Starting demodulation at Position 2
2016.10.05 17:36:04 4: SD_433: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2016.10.05 17:36:04 5: SD_433: Starting demodulation at Position 2
2016.10.05 17:36:04 4: SD_433: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate
2016.10.05 17:36:04 5: SD_433: Starting demodulation at Position 230
2016.10.05 17:36:04 4: SD_433: Fingerprint for MU Protocol id 36 -> socket36 matches, trying to demodulate
2016.10.05 17:36:04 5: SD_433: Starting demodulation at Position 2
2016.10.05 17:36:04 5: SD_433: applying filterfunc SIGNALduino_compPattern
2016.10.05 17:36:04 4: SD_433: Fingerprint for MU Protocol id 49 -> quigg_gt9000 matches, trying to demodulate
2016.10.05 17:36:04 5: SD_433: Starting demodulation at Position 2
2016.10.05 17:36:04 4: SD_433: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2016.10.05 17:36:04 5: SD_433: Starting demodulation at Position 1
2016.10.05 17:36:04 4: SD_433/msg READ: MU;P0=-10306;P1=174;P2=-1149;P4=813;P5=-479;P6=132;D=0121212121245124512121212454545454545454512451245106;CP=1;
2016.10.05 17:36:04 5: SD_433: applying filterfunc SIGNALduino_filterSign
2016.10.05 17:36:04 4: SD_433: Fingerprint for MU Protocol id 21 -> einhell garagedoor matches, trying to demodulate
2016.10.05 17:36:04 5: SD_433: Starting demodulation at Position 2
2016.10.05 17:36:04 4: SD_433: Fingerprint for MU Protocol id 26 -> remote26 matches, trying to demodulate
2016.10.05 17:36:04 5: SD_433: Starting demodulation at Position 2
2016.10.05 17:36:04 4: SD_433: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2016.10.05 17:36:04 5: SD_433: Starting demodulation at Position 2
2016.10.05 17:36:04 4: SD_433: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2016.10.05 17:36:04 5: SD_433: Starting demodulation at Position 2
2016.10.05 17:36:04 4: SD_433: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2016.10.05 17:36:04 5: SD_433: Starting demodulation at Position 2
2016.10.05 17:36:04 4: SD_433: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate
2016.10.05 17:36:04 5: SD_433: Starting demodulation at Position 26
2016.10.05 17:36:04 4: SD_433: Fingerprint for MU Protocol id 36 -> socket36 matches, trying to demodulate
2016.10.05 17:36:04 5: SD_433: Starting demodulation at Position 2
2016.10.05 17:36:04 5: SD_433: applying filterfunc SIGNALduino_compPattern
2016.10.05 17:36:04 4: SD_433: Fingerprint for MU Protocol id 49 -> quigg_gt9000 matches, trying to demodulate
2016.10.05 17:36:04 5: SD_433: Starting demodulation at Position 2
2016.10.05 17:36:04 4: SD_433: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2016.10.05 17:36:04 5: SD_433: Starting demodulation at Position 1
2016.10.05 17:36:04 4: SD_433/msg READ: MU;P0=169;P1=-1136;P2=824;P3=-483;P5=-10288;D=01010123012301010101232323232323232301230123050101010101230123010101012323232323232323012301230;CP=0;
2016.10.05 17:36:04 5: SD_433: applying filterfunc SIGNALduino_filterSign
2016.10.05 17:36:04 4: SD_433: Fingerprint for MU Protocol id 21 -> einhell garagedoor matches, trying to demodulate
2016.10.05 17:36:04 5: SD_433: Starting demodulation at Position 2
2016.10.05 17:36:04 4: SD_433: Fingerprint for MU Protocol id 26 -> remote26 matches, trying to demodulate
2016.10.05 17:36:04 5: SD_433: Starting demodulation at Position 2
2016.10.05 17:36:04 4: SD_433: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2016.10.05 17:36:04 5: SD_433: Starting demodulation at Position 2
2016.10.05 17:36:04 4: SD_433: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2016.10.05 17:36:04 5: SD_433: Starting demodulation at Position 2
2016.10.05 17:36:04 4: SD_433: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2016.10.05 17:36:04 5: SD_433: Starting demodulation at Position 2
2016.10.05 17:36:04 4: SD_433: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate
2016.10.05 17:36:04 5: SD_433: Starting demodulation at Position 21
2016.10.05 17:36:04 4: SD_433: Fingerprint for MU Protocol id 36 -> socket36 matches, trying to demodulate

Was kann ich da weiter tun?
« Letzte Änderung: 08 Oktober 2016, 17:30:31 von Ellert »

Offline Ellert

  • Developer
  • Hero Member
  • ****
  • Beiträge: 3593
Antw:SIGNALduino: REV Fernbedienung wird nicht erkannt IT-V1, tristate
« Antwort #1 am: 08 Oktober 2016, 17:30:02 »
Hat sich erledigt, nach dem Wechsel der Handsenderbatterie funktioniert alles.