Wetterstation WH3080 dekodieren für Signalduino 433Mhz

Begonnen von killah78, 21 Februar 2017, 15:19:02

Vorheriges Thema - Nächstes Thema
Drucken
Nach unten Seiten 1 ... 11 12 13 14 15 ... 20
Benutzer-Aktionen

Joker2002

#180
10 April 2018, 07:30:41
Hm, also liegt es am Signalduino ?

Ralf9

#181
10 April 2018, 07:43:44
was ergibt ein get ccconf?
Evtl bringt es was die "bWidth" auf 4xx, 5xx oder 6xx kHz zu erhöhen.

Gruß Ralf
FHEM auf Cubietruck mit Igor-Image, SSD und  hmland + HM-CFG-USB-2,  HMUARTLGW Lan,   HM-LC-Bl1PBU-FM, HM-CC-RT-DN, HM-SEC-SC-2, HM-MOD-Re-8, HM-MOD-Em-8
HM-Wired:  HMW_IO_12_FM, HMW_Sen_SC_12_DR, Selbstbau IO-Module HBW_IO_SW
Maple-SIGNALduino, WH3080,  Hideki, Id 7

Groej

#182
10 April 2018, 07:49:52
Wollte ich auch gerade schreiben. Ich hab damals auch irgendwas dran geschraubt.

Hier mal die gets vom meinen Signalduino:

Code Auswählen
ccconf: freq:433.920MHz bWidth:325KHz rAmpl:42dB sens:4dB (DataRate:5603.79Baud)
config: MS=1;MU=1;MC=1

Wobei ich gerade sehen das bei mir die Defaultwerte drin sind laut Commendref.

Hast Du Deinen Signalduino mit einen CC1101 gebaut?
FHEM - RaspPi2 - KNXD - KNX - CUL 868 - FS20 - HMS - WH3080 - Signalduino 433 MHz - Telegram - Anel Elektronik IP Steckdosen - BME280

Joker2002

#183
10 April 2018, 07:51:20
Zitat von: Groej am 10 April 2018, 07:49:52
Hast Du Deinen Signalduino mit einen CC1101 gebaut?


Ja, genau

Joker2002

#184
10 April 2018, 07:52:47 Letzte Bearbeitung: 10 April 2018, 07:55:41 von Joker2002
die Config meines Signalduinos sieht so aus:

ccconf: freq:433.920MHz bWidth:325KHz rAmpl:42dB sens:4dB (DataRate:5603.79Baud)
config: MS=1;MU=1;MC=1

pejonp

#185
10 April 2018, 10:04:23
@joker2012
Setze mal bitte deinen log in Code-Abschnitte lässt sich besser lesen.
Vielleicht mal zur Fehlersuche alle anderen Protokolle ausschalten.

Pejonp
LaCrossGW 868MHz:WT470+TFA+TX37-IT+EMT7110+W136+WH25A HP1003+WH2621
SignalD(CC1101):Bresser+WS-0101(868MHz WH1080)+Velux KLF200+MAX!+HM-MOD-UART:Smoke HM-SEC-SD+VITOSOLIC 200 RESOL VBUS-LAN+SolarEdge SE5K(Modbus)+Sonnen!eco8(10kWh)+TD3511+DRT710M(Modbus)+ZigBee+Z-Wave+MQTT+vitoconnect

Joker2002

#186
10 April 2018, 13:57:16
Zitat von: pejonp am 10 April 2018, 10:04:23
@joker2012
Setze mal bitte deinen log in Code-Abschnitte lässt sich besser lesen.
Vielleicht mal zur Fehlersuche alle anderen Protokolle ausschalten.

Pejonp

Habe ich probiert, lässt sich aber irgendwie nachträglich nicht ändern.

Soll ich, nachdem ich die anderen Protokolle ausgeschaltet habe, nochmal ein Log vom Signalduino schicken ?

Joker2002

#187
10 April 2018, 14:00:46
Hier nochmal ein LOG des Signalduinos

Code Auswählen
2018.04.10 13:59:10 4 : Signalduino_433/msg READ: MU;P0=481;P1=-9742;P2=-1961;P3=-4040;P4=336;P5=-6660;D=0101020303030303020303020202030302020345;CP=0;R=226;
2018.04.10 13:59:10 4 : Signalduino_433: Fingerprint for MU Protocol id 13.1 -> FLAMINGO FA21 b matches, trying to demodulate
2018.04.10 13:59:10 5 : Signalduino_433: start pattern for MU Protocol id 13.1 -> FLAMINGO FA21 b mismatches, aborting
2018.04.10 13:59:10 5 : Signalduino_433: applying filterfunc SIGNALduino_filterSign
2018.04.10 13:59:10 5 : Signalduino_433: applying filterfunc SIGNALduino_compPattern
2018.04.10 13:59:11 4 : Signalduino_433/msg READ: MU;P0=-989;P1=1459;P2=479;D=010101010101010201010101010102010101010101010101010101010101010101010101010201010202010101020201;CP=1;R=17;
2018.04.10 13:59:11 5 : Signalduino_433: applying filterfunc SIGNALduino_filterSign
2018.04.10 13:59:11 4 : Signalduino_433: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2018.04.10 13:59:11 5 : Signalduino_433: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting
2018.04.10 13:59:11 4 : Signalduino_433: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate
2018.04.10 13:59:11 5 : Signalduino_433: Starting demodulation at Position 16
2018.04.10 13:59:11 4 : Signalduino_433: Fingerprint for MU Protocol id 36 -> socket36 matches, trying to demodulate
2018.04.10 13:59:11 5 : Signalduino_433: start pattern for MU Protocol id 36 -> socket36 mismatches, aborting
2018.04.10 13:59:11 5 : Signalduino_433: applying filterfunc SIGNALduino_compPattern
2018.04.10 13:59:11 4 : Signalduino_433: Fingerprint for MU Protocol id 48 -> TFA Dostmann matches, trying to demodulate
2018.04.10 13:59:11 5 : Signalduino_433: start pattern for MU Protocol id 48 -> TFA Dostmann mismatches, aborting
2018.04.10 13:59:11 4 : Signalduino_433: Fingerprint for MU Protocol id 5 -> unitec6899 matches, trying to demodulate
2018.04.10 13:59:11 5 : Signalduino_433: Starting demodulation at Position 1
2018.04.10 13:59:11 5 : Signalduino_433: dispatching bits: 1 1 1 1 1 1 1 0 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 1 1 0 0 1 1 1 0 0 0
2018.04.10 13:59:11 4 : Signalduino_433: decoded matched MU Protocol id 5 dmsg p5#FEFDFFFFFB38 length 48 RSSI = -65.5
2018.04.10 13:59:11 4 : Signalduino_433: Fingerprint for MU Protocol id 50 -> optus_XT300 matches, trying to demodulate
2018.04.10 13:59:11 5 : Signalduino_433: Starting demodulation at Position 1
2018.04.10 13:59:11 5 : Signalduino_433: dispatching bits: 0 0 0 0 0 0 0 1 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 1 1 0 0 0 1 1 0
2018.04.10 13:59:11 4 : Signalduino_433: decoded matched MU Protocol id 50 dmsg W50#0102000004C6 length 48 RSSI = -65.5
2018.04.10 13:59:11 5 : Signalduino_433 Dispatch: W50#0102000004C6, test ungleich: disabled
2018.04.10 13:59:11 5 : Signalduino_433 Dispatch: W50#0102000004C6, -65.5 dB, dispatch
2018.04.10 13:59:11 5 : Signalduino_433: dispatch W50#0102000004C6
2018.04.10 13:59:11 4 : SD_WS_Parse: Protocol: 50, rawData: 0102000004C6
2018.04.10 13:59:11 4 : Signalduino_433 decoded protocolid: 50 (XT300) prematch error
2018.04.10 13:59:11 4 : Signalduino_433: Fingerprint for MU Protocol id 64 -> WH2 matches, trying to demodulate
2018.04.10 13:59:11 5 : Signalduino_433: Starting demodulation at Position 1
2018.04.10 13:59:11 4 : Signalduino_433: Fingerprint for MU Protocol id 69 -> Hoermann matches, trying to demodulate
2018.04.10 13:59:11 5 : Signalduino_433: start pattern for MU Protocol id 69 -> Hoermann mismatches, aborting
2018.04.10 13:59:11 4 : Signalduino_433: Fingerprint for MU Protocol id 71 -> PV-8644 matches, trying to demodulate
2018.04.10 13:59:11 5 : Signalduino_433: Starting demodulation at Position 1
2018.04.10 13:59:11 4 : Signalduino_433: Fingerprint for MU Protocol id 75 -> ConradRSL2 matches, trying to demodulate
2018.04.10 13:59:11 5 : Signalduino_433: Starting demodulation at Position 1
2018.04.10 13:59:11 4 : Signalduino_433: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2018.04.10 13:59:11 5 : Signalduino_433: Starting demodulation at Position 15
2018.04.10 13:59:11 4 : Signalduino_433: Fingerprint for MU Protocol id 9 -> CTW 600 matches, trying to demodulate
2018.04.10 13:59:11 5 : Signalduino_433: Starting demodulation at Position 1
2018.04.10 13:59:26 4 : Signalduino_433/msg READ: MS;P2=-45;P3=491;P4=-8926;P5=-1951;D=34353532323232323535353535323235353235323235353535353235353532323535353235;CP=3;SP=4;R=244;O;
2018.04.10 13:59:26 4 : Signalduino_433: Matched MS Protocol id 4 -> arctech2
2018.04.10 13:59:26 5 : Signalduino_433: Starting demodulation at Position 2
2018.04.10 13:59:26 4 : Signalduino_433: Decoded MS Protocol id 4 dmsg iC1F34FB9D00 length 36 RSSI = -80
2018.04.10 13:59:26 5 : Signalduino_433 Dispatch: iC1F34FB9D00, test ungleich: disabled
2018.04.10 13:59:26 5 : Signalduino_433 Dispatch: iC1F34FB9D00, -80 dB, dispatch
2018.04.10 13:59:26 5 : Signalduino_433: dispatch iC1F34FB9D00
2018.04.10 13:59:26 4 : Signalduino_433 IT: message "iC1F34FB9D00" (12)
2018.04.10 13:59:26 1 : PERL WARNING: Hexadecimal number > 0xffffffff non-portable at ./FHEM/10_IT.pm line 953.
2018.04.10 13:59:26 1 : PERL WARNING: Use of uninitialized value in concatenation (.) or string at ./FHEM/10_IT.pm line 986.
2018.04.10 13:59:26 4 : Signalduino_433 IT: msgcode "DD0D0D1100DDDD" (14) bin = 11000001111100110100111110111001110100000000
2018.04.10 13:59:26 4 : Signalduino_433 IT: Wrong IT message received: DD0D0D1100DDDD
2018.04.10 13:59:26 4 : Signalduino_433 IT: message "iC1F34FB9D00" (12)
2018.04.10 13:59:26 4 : Signalduino_433 IT: msgcode "DD0D0D1100DDDD" (14) bin = 11000001111100110100111110111001110100000000
2018.04.10 13:59:26 4 : Signalduino_433 IT: Wrong IT message received: DD0D0D1100DDDD
2018.04.10 13:59:26 3 : Signalduino_433: Unknown code iC1F34FB9D00, help me!
2018.04.10 13:59:26 4 : Signalduino_433/msg READ: MS;P0=-4043;P1=481;P2=-1959;P4=-8692;D=14121210101010101212121212101012121012101012121212121012121210101212121012;CP=1;SP=4;R=245;O;
2018.04.10 13:59:26 4 : Signalduino_433: Matched MS Protocol id 0 -> weather1
2018.04.10 13:59:26 5 : Signalduino_433: Starting demodulation at Position 2
2018.04.10 13:59:26 4 : Signalduino_433: Decoded MS Protocol id 0 dmsg s3E0CB0462000 length 40 RSSI = -79.5
2018.04.10 13:59:26 5 : Signalduino_433 Dispatch: s3E0CB0462000, test ungleich: disabled
2018.04.10 13:59:26 5 : Signalduino_433 Dispatch: s3E0CB0462000, -79.5 dB, dispatch
2018.04.10 13:59:26 5 : Signalduino_433: dispatch s3E0CB0462000
2018.04.10 13:59:26 4 : Signalduino_433: CUL_TCM97001 hex:c703d0264000 msg:3E0CB0462000 aR:c 7 0 3 d 0 2 6 4 0 0 0
2018.04.10 13:59:26 4 : Signalduino_433: CUL_TCM97001 nib2:00 aRev: 0
2018.04.10 13:59:26 4 : Signalduino_433: CUL_TCM97001 nib2R:00 hexR: c703d0264000
2018.04.10 13:59:26 4 : Signalduino_433: CUL_TCM97001 Temp/Hum Msgype: 00 nib3:3
2018.04.10 13:59:26 4 : Signalduino_433: CUL_TCM97001 using longid: 1 model: TCM21....
2018.04.10 13:59:26 4 : Signalduino_433: Matched MS Protocol id 68 -> PFR-130
2018.04.10 13:59:26 5 : Signalduino_433: Starting demodulation at Position 2
2018.04.10 13:59:26 4 : Signalduino_433: Decoded MS Protocol id 68 dmsg s3E0CB0462000 length 40 RSSI = -79.5
2018.04.10 13:59:26 5 : Signalduino_433 Dispatch: s3E0CB0462000, test gleich
2018.04.10 13:59:26 4 : Signalduino_433 Dispatch: s3E0CB0462000, Dropped due to short time or equal msg
2018.04.10 13:59:33 4 : Signalduino_433/msg READ: MU;P0=132;P1=-1057;P2=470;P3=1464;P4=-27396;P5=-2772;P6=92;P7=-112;D=012121313121212131212131312121312131213121312131313131312121313131212121312121213131312121313131313131312131242121212121212131212121313121212131212131312121312131213121312131313131312121313131212121312121213131312121313131313131312131242567;CP=2;R=19;
2018.04.10 13:59:33 4 : Signalduino_433: Fingerprint for MU Protocol id 13.1 -> FLAMINGO FA21 b matches, trying to demodulate
2018.04.10 13:59:33 5 : Signalduino_433: start pattern for MU Protocol id 13.1 -> FLAMINGO FA21 b mismatches, aborting
2018.04.10 13:59:33 5 : Signalduino_433: applying filterfunc SIGNALduino_filterSign
2018.04.10 13:59:33 4 : Signalduino_433: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2018.04.10 13:59:33 5 : Signalduino_433: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting
2018.04.10 13:59:33 4 : Signalduino_433: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate
2018.04.10 13:59:33 5 : Signalduino_433: Starting demodulation at Position 3
2018.04.10 13:59:33 4 : Signalduino_433: Fingerprint for MU Protocol id 36 -> socket36 matches, trying to demodulate
2018.04.10 13:59:33 5 : Signalduino_433: start pattern for MU Protocol id 36 -> socket36 mismatches, aborting
2018.04.10 13:59:33 5 : Signalduino_433: applying filterfunc SIGNALduino_compPattern
2018.04.10 13:59:33 4 : Signalduino_433: Fingerprint for MU Protocol id 48 -> TFA Dostmann matches, trying to demodulate
2018.04.10 13:59:33 5 : Signalduino_433: Starting demodulation at Position 3
2018.04.10 13:59:33 4 : Signalduino_433: Fingerprint for MU Protocol id 50 -> optus_XT300 matches, trying to demodulate
2018.04.10 13:59:33 5 : Signalduino_433: Starting demodulation at Position 2
2018.04.10 13:59:33 4 : Signalduino_433: Fingerprint for MU Protocol id 61 -> FS10 matches, trying to demodulate
2018.04.10 13:59:33 5 : Signalduino_433: Starting demodulation at Position 2
2018.04.10 13:59:33 4 : Signalduino_433: Fingerprint for MU Protocol id 64 -> WH2 matches, trying to demodulate
2018.04.10 13:59:33 5 : Signalduino_433: Starting demodulation at Position 2
2018.04.10 13:59:33 5 : Signalduino_433: dispatching bits: 1 1 0 0 1 1 1 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 0 0 0 0 0 1 1 0 0 0 1 1 1 0 1 1 1 0 0 0 1 1 0 0 0 0 0 0 0 1 0 0 0 0
2018.04.10 13:59:33 4 : Signalduino_433: decoded matched MU Protocol id 64 dmsg W64#CECD5418EE3010 length 56 RSSI = -64.5
2018.04.10 13:59:33 5 : Signalduino_433 Dispatch: W64#CECD5418EE3010, test ungleich: disabled
2018.04.10 13:59:33 5 : Signalduino_433 Dispatch: W64#CECD5418EE3010, -64.5 dB, dispatch
2018.04.10 13:59:33 5 : Signalduino_433: dispatch W64#CECD5418EE3010
2018.04.10 13:59:33 4 : SD_WS_Parse: Protocol: 64, rawData: CECD5418EE3010
2018.04.10 13:59:33 4 : Signalduino_433: SD_WS_WH2_4 Error kein WH2: Typ: 11001110
2018.04.10 13:59:33 4 : Signalduino_433: Fingerprint for MU Protocol id 65 -> Homeeasy matches, trying to demodulate
2018.04.10 13:59:33 5 : Signalduino_433: start pattern for MU Protocol id 65 -> Homeeasy mismatches, aborting
2018.04.10 13:59:33 4 : Signalduino_433: Fingerprint for MU Protocol id 71 -> PV-8644 matches, trying to demodulate
2018.04.10 13:59:33 5 : Signalduino_433: Starting demodulation at Position 2
2018.04.10 13:59:33 4 : Signalduino_433: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2018.04.10 13:59:33 5 : Signalduino_433: Starting demodulation at Position 2
2018.04.10 13:59:33 4 : Signalduino_433: Fingerprint for MU Protocol id 9 -> CTW 600 matches, trying to demodulate
2018.04.10 13:59:33 5 : Signalduino_433: Starting demodulation at Position 2
2018.04.10 13:59:33 5 : Signalduino_433: dispatching bits: 1 1 1 1 1 1 1 0 1 1 1 0 0 1 1 1 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 0 0 0 0 0 1 1 0 0 0 1 1 1 0 1 1 1 0 0 0 1 1 0 0 0 0 0 0 0 1 0 0 0
2018.04.10 13:59:33 4 : Signalduino_433: decoded matched MU Protocol id 9 dmsg P9#FEE766AA0C771808 length 64 RSSI = -64.5
2018.04.10 13:59:33 5 : Signalduino_433 Dispatch: P9#FEE766AA0C771808, test ungleich: disabled
2018.04.10 13:59:33 5 : Signalduino_433 Dispatch: P9#FEE766AA0C771808, -64.5 dB, dispatch
2018.04.10 13:59:33 5 : Signalduino_433: dispatch P9#FEE766AA0C771808
2018.04.10 13:59:33 4 : Signalduino_433: SD_WS09_Parse0 msg=FEE766AA0C771808 Bin=1111111011100111011001101010101000001100011101110001100000001000 syncp=0 length:64
2018.04.10 13:59:33 4 : Signalduino_433: SD_WS09_Parse CRC_AUS:0
2018.04.10 13:59:33 4 : Signalduino_433: SD_WS09_SHIFT_1 NOK rwa:FF73B355063B8C04
2018.04.10 13:59:33 4 : Signalduino_433: SD_WS09_SHIFT_3 NOK rwa:FFB9D9AA831DC602
2018.04.10 13:59:33 4 : Signalduino_433: SD_WS09_SHIFT_5 NOK rwa:FEE766AA0C771808 msg:P9#FEE766AA0C771808
2018.04.10 13:59:33 4 : Signalduino_433: SD_WS09_CRC_test2 rwa:FEE766AA0C771808 msg:P9#FEE766AA0C771808 CRC:98
2018.04.10 13:59:33 4 : Signalduino_433: SD_WS09_Parse_18 CTW600 EXIT: msg=1111111011100111011001101010101000001100011101110001100000001000 length:64
2018.04.10 13:59:33 4 : Signalduino_433: SD_WS09_Parse0 msg=FEE766AA0C771808 Bin=1111111011100111011001101010101000001100011101110001100000001000 syncp=0 length:64
2018.04.10 13:59:33 4 : Signalduino_433: SD_WS09_Parse CRC_AUS:0
2018.04.10 13:59:33 4 : Signalduino_433: SD_WS09_SHIFT_1 NOK rwa:FF73B355063B8C04
2018.04.10 13:59:33 4 : Signalduino_433: SD_WS09_SHIFT_3 NOK rwa:FFB9D9AA831DC602
2018.04.10 13:59:33 4 : Signalduino_433: SD_WS09_SHIFT_5 NOK rwa:FEE766AA0C771808 msg:P9#FEE766AA0C771808
2018.04.10 13:59:33 4 : Signalduino_433: SD_WS09_CRC_test2 rwa:FEE766AA0C771808 msg:P9#FEE766AA0C771808 CRC:98
2018.04.10 13:59:33 4 : Signalduino_433: SD_WS09_Parse_18 CTW600 EXIT: msg=1111111011100111011001101010101000001100011101110001100000001000 length:64
2018.04.10 13:59:33 3 : Signalduino_433: Unknown code P9#FEE766AA0C771808, help me!
2018.04.10 13:59:33 4 : Signalduino_433/msg READ: MU;P0=-2680;P1=1459;P2=-1059;P3=493;D=0123212123232321212323232123232121232321232123212321232121212121232321212123232321232323212121232321212121212121232123;CP=3;R=20;
2018.04.10 13:59:33 5 : Signalduino_433: applying filterfunc SIGNALduino_filterSign
2018.04.10 13:59:33 4 : Signalduino_433: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2018.04.10 13:59:33 5 : Signalduino_433: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting
2018.04.10 13:59:33 4 : Signalduino_433: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate
2018.04.10 13:59:33 5 : Signalduino_433: Starting demodulation at Position 4
2018.04.10 13:59:33 5 : Signalduino_433: applying filterfunc SIGNALduino_compPattern
2018.04.10 13:59:33 4 : Signalduino_433: Fingerprint for MU Protocol id 48 -> TFA Dostmann matches, trying to demodulate
2018.04.10 13:59:33 5 : Signalduino_433: Starting demodulation at Position 4
2018.04.10 13:59:33 4 : Signalduino_433: Fingerprint for MU Protocol id 50 -> optus_XT300 matches, trying to demodulate
2018.04.10 13:59:33 5 : Signalduino_433: Starting demodulation at Position 1
2018.04.10 13:59:33 4 : Signalduino_433: Fingerprint for MU Protocol id 64 -> WH2 matches, trying to demodulate
2018.04.10 13:59:33 5 : Signalduino_433: Starting demodulation at Position 1
2018.04.10 13:59:33 4 : Signalduino_433: Fingerprint for MU Protocol id 71 -> PV-8644 matches, trying to demodulate
2018.04.10 13:59:33 5 : Signalduino_433: Starting demodulation at Position 1
2018.04.10 13:59:33 4 : Signalduino_433: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2018.04.10 13:59:33 5 : Signalduino_433: Starting demodulation at Position 3
2018.04.10 13:59:33 4 : Signalduino_433: Fingerprint for MU Protocol id 9 -> CTW 600 matches, trying to demodulate
2018.04.10 13:59:33 5 : Signalduino_433: Starting demodulation at Position 1
2018.04.10 13:59:36 4 : Signalduino_433/msg READ: MC;LL=-2673;LH=3190;SL=-1200;SH=1734;D=DB5FBF2B;C=1466;L=32;R=2;
2018.04.10 13:59:36 4 : Signalduino_433: Found manchester Protocol id 18 clock 1466 RSSI -73 -> OSV1
2018.04.10 13:59:36 5 : Signalduino_433: extracted data 00100100101000000100000011010100 (bin)
2018.04.10 13:59:36 4 : Signalduino_433: OSV1 input data: 00100100101000000100000011010100
2018.04.10 13:59:36 4 : Signalduino_433: OSV1 protocol id (18) translated to RFXSensor format
2018.04.10 13:59:36 4 : Signalduino_433: converted to hex: (500A4D1004502000001D00)
2018.04.10 13:59:36 5 : Signalduino_433 Dispatch: 500A4D1004502000001D00, test ungleich: disabled
2018.04.10 13:59:36 5 : Signalduino_433 Dispatch: 500A4D1004502000001D00, -73 dB, dispatch
2018.04.10 13:59:36 5 : Signalduino_433: dispatch 500A4D1004502000001D00
2018.04.10 13:59:36 5 : OREGON: decoding delay=30.0575160980225 hex=500A4D1004502000001D00
2018.04.10 13:59:36 5 : OREGON: sensor_id=0a4d BitsMsg=80 Bits=80
2018.04.10 13:59:36 5 : OREGON: checksum2 = 29 berechnet: 29
2018.04.10 13:59:36 4 : Signalduino_433/msg READ: MC;LL=-2672;LH=3196;SL=-1209;SH=1724;D=DB5FBF2B;C=1466;L=32;R=255;
2018.04.10 13:59:36 4 : Signalduino_433: Found manchester Protocol id 18 clock 1466 RSSI -74.5 -> OSV1
2018.04.10 13:59:36 5 : Signalduino_433: extracted data 00100100101000000100000011010100 (bin)
2018.04.10 13:59:36 4 : Signalduino_433: OSV1 input data: 00100100101000000100000011010100
2018.04.10 13:59:36 4 : Signalduino_433: OSV1 protocol id (18) translated to RFXSensor format
2018.04.10 13:59:36 4 : Signalduino_433: converted to hex: (500A4D1004502000001D00)
2018.04.10 13:59:36 5 : Signalduino_433 Dispatch: 500A4D1004502000001D00, test gleich
2018.04.10 13:59:36 4 : Signalduino_433 Dispatch: 500A4D1004502000001D00, Dropped due to short time or equal msg
2018.04.10 13:59:43 4 : Signalduino_433/msg READ: MS;P0=-1959;P1=488;P2=-4050;P3=-8925;D=13101010121210121210101010121010121210121210101010121010101012121012101212;CP=1;SP=3;R=4;O;
2018.04.10 13:59:43 4 : Signalduino_433: Matched MS Protocol id 0 -> weather1
2018.04.10 13:59:43 5 : Signalduino_433: Starting demodulation at Position 2
2018.04.10 13:59:43 4 : Signalduino_433: Decoded MS Protocol id 0 dmsg s1B09B086B000 length 40 RSSI = -72
2018.04.10 13:59:43 5 : Signalduino_433 Dispatch: s1B09B086B000, test ungleich: disabled
2018.04.10 13:59:43 5 : Signalduino_433 Dispatch: s1B09B086B000, -72 dB, dispatch
2018.04.10 13:59:43 5 : Signalduino_433: dispatch s1B09B086B000
2018.04.10 13:59:43 4 : Signalduino_433: CUL_TCM97001 hex:8d09d016d000 msg:1B09B086B000 aR:8 d 0 9 d 0 1 6 d 0 0 0
2018.04.10 13:59:43 4 : Signalduino_433: CUL_TCM97001 nib2:00 aRev: 0
2018.04.10 13:59:43 4 : Signalduino_433: CUL_TCM97001 nib2R:00 hexR: 8d09d016d000
2018.04.10 13:59:43 4 : Signalduino_433: CUL_TCM97001 Temp/Hum Msgype: 00 nib3:9
2018.04.10 13:59:43 4 : Signalduino_433: CUL_TCM97001 using longid: 1 model: TCM21....
2018.04.10 13:59:43 4 : Signalduino_433: Matched MS Protocol id 68 -> PFR-130
2018.04.10 13:59:43 5 : Signalduino_433: Starting demodulation at Position 2
2018.04.10 13:59:43 4 : Signalduino_433: Decoded MS Protocol id 68 dmsg s1B09B086B000 length 40 RSSI = -72
2018.04.10 13:59:43 5 : Signalduino_433 Dispatch: s1B09B086B000, test gleich
2018.04.10 13:59:43 4 : Signalduino_433 Dispatch: s1B09B086B000, Dropped due to short time or equal msg
2018.04.10 13:59:44 4 : Signalduino_433/msg READ: MS;P0=-4039;P1=482;P2=-1956;P3=-8943;D=13121212101012101012121212101212101012101012121212101212121210101210121010;CP=1;SP=3;R=4;O;
2018.04.10 13:59:44 4 : Signalduino_433: Matched MS Protocol id 0 -> weather1
2018.04.10 13:59:44 5 : Signalduino_433: Starting demodulation at Position 2
2018.04.10 13:59:44 4 : Signalduino_433: Decoded MS Protocol id 0 dmsg s1B09B086B000 length 40 RSSI = -72
2018.04.10 13:59:44 5 : Signalduino_433 Dispatch: s1B09B086B000, test gleich
2018.04.10 13:59:44 4 : Signalduino_433 Dispatch: s1B09B086B000, Dropped due to short time or equal msg
2018.04.10 13:59:44 4 : Signalduino_433: Matched MS Protocol id 68 -> PFR-130
2018.04.10 13:59:44 5 : Signalduino_433: Starting demodulation at Position 2
2018.04.10 13:59:44 4 : Signalduino_433: Decoded MS Protocol id 68 dmsg s1B09B086B000 length 40 RSSI = -72
2018.04.10 13:59:44 5 : Signalduino_433 Dispatch: s1B09B086B000, test gleich
2018.04.10 13:59:44 4 : Signalduino_433 Dispatch: s1B09B086B000, Dropped due to short time or equal msg
2018.04.10 13:59:44 4 : Signalduino_433/msg READ: MU;P0=-4046;P1=481;P2=-8924;P3=-1959;D=0101213131310101310101313131310131310101310101313131310131;CP=1;R=3;
2018.04.10 13:59:44 4 : Signalduino_433: Fingerprint for MU Protocol id 13.1 -> FLAMINGO FA21 b matches, trying to demodulate
2018.04.10 13:59:44 5 : Signalduino_433: start pattern for MU Protocol id 13.1 -> FLAMINGO FA21 b mismatches, aborting
2018.04.10 13:59:44 5 : Signalduino_433: applying filterfunc SIGNALduino_filterSign
2018.04.10 13:59:44 5 : Signalduino_433: applying filterfunc SIGNALduino_compPattern
2018.04.10 13:59:56 4 : Signalduino_433/keepalive ok, retry = 0
2018.04.10 13:59:58 4 : Signalduino_433/msg READ: MU;P0=776;P1=-990;P2=470;P3=1458;D=01212121212121213121313121212121212131313121313121213131213121313121312131212131313131313131313131313131313121313131313131313131313131313131313131313131312131313121312121212;CP=2;R=19;
2018.04.10 13:59:58 5 : Signalduino_433: applying filterfunc SIGNALduino_filterSign
2018.04.10 13:59:58 4 : Signalduino_433: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2018.04.10 13:59:58 5 : Signalduino_433: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting
2018.04.10 13:59:58 4 : Signalduino_433: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate
2018.04.10 13:59:58 5 : Signalduino_433: Starting demodulation at Position 3
2018.04.10 13:59:58 4 : Signalduino_433: Fingerprint for MU Protocol id 36 -> socket36 matches, trying to demodulate
2018.04.10 13:59:58 5 : Signalduino_433: start pattern for MU Protocol id 36 -> socket36 mismatches, aborting
2018.04.10 13:59:58 5 : Signalduino_433: applying filterfunc SIGNALduino_compPattern
2018.04.10 13:59:58 4 : Signalduino_433: Fingerprint for MU Protocol id 48 -> TFA Dostmann matches, trying to demodulate
2018.04.10 13:59:58 5 : Signalduino_433: start pattern for MU Protocol id 48 -> TFA Dostmann mismatches, aborting
2018.04.10 13:59:58 4 : Signalduino_433: Fingerprint for MU Protocol id 5 -> unitec6899 matches, trying to demodulate
2018.04.10 13:59:58 5 : Signalduino_433: Starting demodulation at Position 2
2018.04.10 13:59:58 5 : Signalduino_433: dispatching bits: 0 0 0 0 0 0 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 1 0 0 1 1 0 1 0 1 1 0 1 0 1 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 1 1 1 0 1 0 0 0 0 0 0
2018.04.10 13:59:58 4 : Signalduino_433: decoded matched MU Protocol id 5 dmsg p5#0160766B53FFFBFFFFF740 length 88 RSSI = -64.5
2018.04.10 13:59:58 4 : Signalduino_433: Fingerprint for MU Protocol id 50 -> optus_XT300 matches, trying to demodulate
2018.04.10 13:59:58 5 : Signalduino_433: Starting demodulation at Position 2
2018.04.10 13:59:58 4 : Signalduino_433: Fingerprint for MU Protocol id 64 -> WH2 matches, trying to demodulate
2018.04.10 13:59:58 5 : Signalduino_433: Starting demodulation at Position 2
2018.04.10 13:59:58 4 : Signalduino_433: Fingerprint for MU Protocol id 69 -> Hoermann matches, trying to demodulate
2018.04.10 13:59:58 5 : Signalduino_433: start pattern for MU Protocol id 69 -> Hoermann mismatches, aborting
2018.04.10 13:59:58 4 : Signalduino_433: Fingerprint for MU Protocol id 71 -> PV-8644 matches, trying to demodulate
2018.04.10 13:59:58 5 : Signalduino_433: Starting demodulation at Position 2
2018.04.10 13:59:58 4 : Signalduino_433: Fingerprint for MU Protocol id 75 -> ConradRSL2 matches, trying to demodulate
2018.04.10 13:59:58 5 : Signalduino_433: Starting demodulation at Position 2
2018.04.10 13:59:58 4 : Signalduino_433: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2018.04.10 13:59:58 5 : Signalduino_433: Starting demodulation at Position 0
2018.04.10 13:59:58 4 : Signalduino_433: Fingerprint for MU Protocol id 9 -> CTW 600 matches, trying to demodulate
2018.04.10 13:59:58 5 : Signalduino_433: Starting demodulation at Position 2
2018.04.10 13:59:58 5 : Signalduino_433: dispatching bits: 1 1 1 1 1 1 1 0 1 0 0 1 1 1 1 1 1 0 0 0 1 0 0 1 1 0 0 1 0 1 0 0 1 0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1 0 1 1 1 0 0 0
2018.04.10 13:59:58 4 : Signalduino_433: decoded matched MU Protocol id 9 dmsg P9#FE9F8994AC0004000008B8 length 88 RSSI = -64.5
2018.04.10 13:59:58 5 : Signalduino_433 Dispatch: P9#FE9F8994AC0004000008B8, test ungleich: disabled
2018.04.10 13:59:58 5 : Signalduino_433 Dispatch: P9#FE9F8994AC0004000008B8, -64.5 dB, dispatch
2018.04.10 13:59:58 5 : Signalduino_433: dispatch P9#FE9F8994AC0004000008B8
2018.04.10 13:59:58 4 : Signalduino_433: SD_WS09_Parse0 msg=FE9F8994AC0004000008B8 Bin=1111111010011111100010011001010010101100000000000000010000000000000000000000100010111000 syncp=0 length:88
2018.04.10 13:59:58 4 : Signalduino_433: SD_WS09_Parse CRC_AUS:0
2018.04.10 13:59:58 4 : Signalduino_433: SD_WS09_SHIFT_1 NOK rwa:FF4FC4CA5600020000045C
2018.04.10 13:59:58 4 : Signalduino_433: SD_WS09_SHIFT_3 NOK rwa:FFA7E2652B00010000022E
2018.04.10 13:59:58 4 : Signalduino_433: SD_WS09_SHIFT_5 NOK rwa:FE9F8994AC0004000008B8 msg:P9#FE9F8994AC0004000008B8
2018.04.10 13:59:58 4 : Signalduino_433: SD_WS09_CRC_test2 rwa:FE9F8994AC0004000008B8 msg:P9#FE9F8994AC0004000008B8 CRC:57
2018.04.10 13:59:58 4 : Signalduino_433: SD_WS09_Parse_11 CTW600 EXIT: msg=1111111010011111100010011001010010101100000000000000010000000000000000000000100010111000 wh:11111110 length:88
2018.04.10 13:59:58 4 : Signalduino_433: SD_WS09_Parse_12 CTW WH=11111110 msg=10011111100010011001010010101100000000000000010000000000000000000000100010111000 syncp=0 length:80
2018.04.10 13:59:58 4 : Signalduino_433: SD_WS09_Parse_13 Id: 1001 NN1:00 NN2:0000
2018.04.10 13:59:58 4 : Signalduino_433: SD_WS09_Parse_14 Id: 1001 Bin-Sync=10011111100010011001010010101100000000000000010000000000000000000000100010111000 syncp=0 length:80
2018.04.10 13:59:58 4 : Signalduino_433: SD_WS09_Parse_15 CTW600 Windspeed bit: 00000000 Dec: 0.0
2018.04.10 13:59:58 4 : Signalduino_433: SD_WS09_Parse_16 CTW600 Windguest bit: 00000100 Dec: 1.4
2018.04.10 13:59:58 4 : Signalduino_433: SD_WS09_Parse_17 CTW600 Rain bit: 0000000000000000 Dec: 0.0
2018.04.10 13:59:58 4 : Signalduino_433: SD_WS09_Parse_19 CTW600 id:62 :10011111100010011001010010101100000000000000010000000000000000000000100010111000

Olly

#188
10 April 2018, 14:19:04
Hi,

ganz banale Frage: Unterstützt der verwendete Sender (Mast) wirklich UV und Lux? Es gab/gibt auch welche ohne die genauso aussehen.

Gruß

   Olly

Gesendet von meinem moto x4 mit Tapatalk

BananaPi 1GB;NetCSM 868MHz, miniCUL 433MHz, LaCrosseGateway, 2x SignalESP; FHEM 6.2

Joker2002

#189
10 April 2018, 15:34:10
Hallo Olly,

also ich habe bei Froggit eine WH3080 bestellt. Diese unterstützt UV und Licht und der Sensor ist diesbezüglich auch als "Hardware" mit dabei. Wie gesagt, einmal habe ich ja auch Werte reinbekommen, die aktualisieren sich halt nur nicht mehr  ;)

pejonp

#190
10 April 2018, 16:06:30
@joker2002
Was ich so gesehen habe kommen irgendwelche Daten rein. Nur die stimmen nicht ganz. Werde ich bei Gelegenheit mal prüfen. Wenn du einen CC1101 hast vielleicht verstellst du mal etwas die Frequenz.
Pejonp

Und schalte mal die anderen Protokolle ab, nur zum testen.
LaCrossGW 868MHz:WT470+TFA+TX37-IT+EMT7110+W136+WH25A HP1003+WH2621
SignalD(CC1101):Bresser+WS-0101(868MHz WH1080)+Velux KLF200+MAX!+HM-MOD-UART:Smoke HM-SEC-SD+VITOSOLIC 200 RESOL VBUS-LAN+SolarEdge SE5K(Modbus)+Sonnen!eco8(10kWh)+TD3511+DRT710M(Modbus)+ZigBee+Z-Wave+MQTT+vitoconnect

Joker2002

#191
11 April 2018, 09:23:34
Kurzer Zwischenbericht:

Ich habe die Frequenzen jetzt mal in 5er Schritten von 433.920 bis 433.940 erhöht. Leider ohne Erfolg. Seit heute Morgen sind nun auch die UV und LUX States wieder aus dem Wh1080 Device verschwunden.

pejonp

#192
11 April 2018, 14:57:20
@joker2002

setzte mal bei deinem Signalduino WS09_CRCAUS=2 und die Frequenz wieder auf Standart.

pejonp
LaCrossGW 868MHz:WT470+TFA+TX37-IT+EMT7110+W136+WH25A HP1003+WH2621
SignalD(CC1101):Bresser+WS-0101(868MHz WH1080)+Velux KLF200+MAX!+HM-MOD-UART:Smoke HM-SEC-SD+VITOSOLIC 200 RESOL VBUS-LAN+SolarEdge SE5K(Modbus)+Sonnen!eco8(10kWh)+TD3511+DRT710M(Modbus)+ZigBee+Z-Wave+MQTT+vitoconnect

Joker2002

#193
11 April 2018, 18:11:28
Hm.. wo muss ich das denn einstellen ?

In den Attributen habe ich hierzu nichts gefunden und auch bei den "set" Befehlen kann ich diesbezüglich nichts einstellen.

Joker2002

#194
11 April 2018, 18:13:02
Ok, habs in den Attributen gefunden... :)
Drucken
Nach oben Seiten 1 ... 11 12 13 14 15 ... 20
Benutzer-Aktionen