Autor Thema: THZ Tecalor (LWZ Stiebel Eltron) module support and code improvement.  (Gelesen 218769 mal)

Offline martincfd

  • New Member
  • *
  • Beiträge: 12
Antw:THZ Tecalor (LWZ Stiebel Eltron) module support and code improvement.
« Antwort #1080 am: 24 Januar 2022, 09:44:07 »
The variables connected to the curves should all have enough variation, in order to fit a function
outside_tempFiltered roomSetTemp p13GradientHC1 LowEndHC1 p15RoomInfluenceHC1  insideTemp
the function should remain as simple as possible.
immi
As this is really only a very minor issue I will give it a try if I have some time and see if I can improve anything at all. It is clear that dependence on parameters should at most be linear and dependence on outside temp at most be cubic (or maybe a single power term). Dependence on insideTemp and roomInfluence is documented with a formula luckily.
FHEM auf Raspberry Zero 2W, THZ 504 mit FBH, 140qm+60qm (beheizt+unbeheizt, alles KWL), Heizlast 3.8kW bei NAT -10°C, PV 5.2kWp