signalduino probleme

Kawaci · 16 November 2017, 22:03:02

Hallo!
Ich habe Probleme mit senden von somfy und empfangen von Hideki

Signalduino list:

Internals: 
   Clients    :IT:CUL_TCM97001:SD_RSL:OREGON:CUL_TX:SD_AS:Hideki:SD_WS07:SD_WS09: :SD_WS:RFXX10REC:Dooya:SOMFY:SD_UT:SD_WS_Maverick:FLAMINGO:CUL_WS:Revolt: :FS10:CUL_FHTTK:Siro:FHT:FS20:SIGNALduino_un: 
   DEF        /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A700CVK6-if00-port0@57600 
   DMSG       r49E3EE00003200000017AB 
   DevState   initialized 
   DeviceName /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A700CVK6-if00-port0@57600 
   FD         22 
   LASTDMSG   r49E3EE00003200000017AB 
   MSGCNT     14 
   NAME       sduino 
   NR         59 
   PARTIAL 
   RAWMSG     MU;P0=10036;P1=-344;P2=163;P3=-196;P4=279;P6=-16492;D=012343232343232343434343232323434343434323434343232323232323232323232323232323232323234343232343232323232323232323232323232323232323232323232323232323234323434343432343234323434323232323434343232323232343234326;CP=2;R=59; 
   RSSI       -44.5 
   STATE      opened 
   TIME       1510865695 
   TYPE       SIGNALduino 
   sendworking 0 
   unknownmessages 2017-11-16 21:54:16-MU;P0=14032;P1=-332;P2=170;P3=-196;P4=280;P6=-16152;P7=-488;D=01234323234323234343434323232343434343432343434323232323232323232323232323232323232323434323234323232323232323232323232323232323232323232323232323232323432343434343234323432343432323232343434323232323234323432627;CP=2;R=59;#2017-11-16 21:54:20-MU;P0=896;P1=-320;P2=162;P3=-186;P4=262;P6=-16712;P7=92;D=012343232343232343434343232323434343434323434343232323232323232323232323232323232323234343232343232323232323232323232323232323232323232323232323232323234323434343432343234323434323232323434343232323232343234326734;CP=2;R=59;#2017-11-16 21:54:23-MU;P0=32001;P1=-324;P2=147;P3=-214;P4=276;P5=-16132;D=012343232343232343434343232323434343434323434323432323232323232323232323232323232323234343232343232323232323232323232323232323232323232323232323232323234323434343432343234323434323232323434323432323232343432325;CP=2;R=59;#2017-11-16 21:54:27-MU;P0=32001;P1=-368;P2=160;P3=-204;P4=278;P5=-16040;P6=112;D=01234323234323234343434323232343434343432343432343232323232323232323232323232323232323434323234323232323232323232323232323232323232323232323232323232323432343434343234323432343432323232343432343232323234343232561;CP=2;R=59;#2017-11-16 21:54:30-MU;P0=-106;P1=32001;P2=139;P3=-211;P4=251;P5=-16572;D=2343232343232343434343232323434343434323434323432323232323232323232323232323232323234343232343232323232323232323232323232323232323232323232323232323234323434343432343234323434323232323434323432323232343432325434020401;CP=2;R=59;#2017-11-16 21:54:34-MU;P0=560;P1=-324;P2=148;P3=-210;P4=288;P5=-16024;D=012343232343232343434343232323434343434323434323432323232323232323232323232323232323234343232343232323232323232323232323232323232323232323232323232323234323434343432343234323434323232323434323432323232343432325;CP=2;R=59;#2017-11-16 21:54:38-MU;P0=32001;P1=-324;P2=167;P3=-197;P4=278;P5=-16256;D=012343232343232343434343232323434343434323434343232323232323232323232323232323232323234343232343232323232323232323232323232323232323232323232323232323234323434343432343234323434323232323434343232323232343234325;CP=2;R=59;#2017-11-16 21:54:41-MU;P0=32001;P1=-324;P2=152;P3=-209;P4=279;D=01234323234323234343434323232343434343432343434323232323232323232323232323232323232323434323234323232323232323232323232323232323232323232323232323232323432343434343234323432343432323232343434323232323234323432;CP=2;R=59;#2017-11-16 21:54:45-MU;P0=32001;P1=-304;P2=165;P3=-200;P4=279;P5=-16556;P6=92;D=0123432323432323434343432323234343434343234343234323232323232323232323232323232323232343432323432323232323232323232323232323232323232323232323232323232343234343434323432343234343232323234343234323232323434323256;CP=2;R=59;#2017-11-16 21:54:48-MU;P0=32001;P1=-372;P2=164;P3=-198;P4=277;P5=-16244;P6=108;D=012343232343232343434343232323434343434323434343232323232323232323232323232323232323234343232343232323232323232323232323232323232323232323232323232323234323434343432343234323434323232323434343232323232343234325610;CP=2;R=60;#2017-11-16 21:54:52-MU;P0=24144;P1=-328;P2=163;P3=-201;P4=273;P6=-17632;D=012343232343232343434343232323434343434323434323432323232323232323232323232323232323234343232343232323232323232323232323232323232323232323232323232323234323434343432343234323434323232323434323432323232343432326;CP=2;R=59;#2017-11-16 21:54:58-MU;P0=-492;P1=-328;P2=153;P3=-206;P4=281;P7=-16368;D=01234323234323234343434323232343434343432343434323232323232323232323232323232323232323434323234323232323232323232323232323232323232323232323232323232323432343434343234323432343432323232343434323232323234323432720;CP=2;R=59;#2017-11-16 21:55:01-MU;P0=32001;P1=-324;P2=163;P3=-197;P4=278;P5=-16528;D=0123432323432323434343432323234343434343234343432323232323232323232323232323232323232343432323432323232323232323232323232323232323232323232323232323232343234343434323432343234343232323234343432323232323432343252;CP=2;R=59;#2017-11-16 21:55:05-MU;P0=32001;P1=-312;P2=165;P3=-198;P4=276;P5=-16396;D=012343232343232343434343232323434343434323434343232323232323232323232323232323232323234343232343232323232323232323232323232323232323232323232323232323234323434343432343234323434323232323434343232323232343234325;CP=2;R=59;#2017-11-16 21:55:08-MU;P0=7736;P1=-336;P2=154;P3=-212;P4=271;P5=-18432;D=012343232343232343434343232323434343434323434343232323232323232323232323232323232323234343232343232323232323232323232323232323232323232323232323232323234323434343432343234323434323232323434343232323232343234325;CP=2;R=59;#2017-11-16 21:55:12-MU;P0=24620;P1=-316;P2=154;P3=-209;P4=277;P5=-17756;D=012343232343232343434343232323434343434323434343232323232323232323232323232323232323234343232343232323232323232323232323232323232323232323232323232323234323434343432343234323434323232323434343232323232343234325;CP=2;R=59;#2017-11-16 21:55:15-MU;P0=-536;P1=804;P2=166;P3=-193;P4=285;P5=-16204;P6=92;P7=-108;D=234323234323234343434323232343434343432343432343232323232323232323232323232323232323434323234323232323232323232323232323232323232323232323232323232323432343434343234323432343432323232343432343232323234343232567601;CP=2;R=59;#2017-11-16 21:55:19-MU;P0=160;P1=-332;P3=-198;P4=288;P5=-16884;P7=-112;D=010343030343030343434343030303434343434303434303430303030303030303030303030303030303034343030343030303030303030303030303030303030303030303030303030303034303434343430343034303434303030303434303430303030343430305070;CP=0;R=59;#2017-11-16 21:55:22-MU;P0=32001;P1=-342;P2=149;P3=-196;P4=280;P6=-16472;D=012343232343232343434343232323434343434323434343232323232323232323232323232323232323234343232343232323232323232323232323232323232323232323232323232323234323434343432343234323434323232323434343232323232343234326212;CP=2;R=59;#2017-11-16 21:55:26-MU;P0=32001;P1=-324;P2=152;P3=-231;P4=276;P5=-15996;D=01234323234323234343434323232343434343432343432343232323232323232323232323232323232323434323234323232323232323232323232323232323232323232323232323232323432343434343234323432343432323232343432343232323234343232523;CP=2;R=59;#2017-11-16 21:55:28-MU;P0=32001;P1=-340;P2=154;P3=-208;P4=278;P6=-16308;D=012343232343232343434343232323434343434323434343232323232323232323232323232323232323234343232343232323232323232323232323232323232323232323232323232323234323434343432343234323434323232323434343232323232343234326;CP=2;R=59;#2017-11-16 21:55:32-MU;P0=23992;P1=-332;P2=164;P3=-196;P4=279;P6=-16616;D=012343232343232343434343232323434343434323434343232323232323232323232323232323232323234343232343232323232323232323232323232323232323232323232323232323234323434343432343234323434323232323434343232323232343234326;CP=2;R=59;#2017-11-16 21:55:39-MU;P0=26740;P1=-328;P2=166;P3=-197;P4=275;P5=-16364;D=012343232343232343434343232323434343434323434323432323232323232323232323232323232323234343232343232323232323232323232323232323232323232323232323232323234323434343432343234323434323232323434323432323232343432325;CP=2;R=59;#2017-11-16 21:55:42-MU;P0=32001;P1=-324;P2=148;P3=-210;P4=288;P6=-16912;D=0123432323432323434343432323234343434343234343234323232323232323232323232323232323232343432323432323232323232323232323232323232323232323232323232323232343234343434323432343234343232323234343234323232323434323264;CP=2;R=59;#2017-11-16 21:55:46-MU;P0=-92;P1=-324;P2=164;P3=-196;P4=272;P6=-17284;P7=444;D=012343232343232343434343232323434343434323434343232323232323232323232323232323232323234343232343232323232323232323232323232323232323232323232323232323234323434343432343234323434323232323434343232323232343234326704;CP=2;R=60; 
   version    V 3.3.1-dev SIGNALduino cc1101 - compiled at Mar 10 2017 22:54:50 
   DoubleMsgIDs: 
   MatchList: 
     10:SD_WS07 ^P7#[A-Fa-f0-9]{6}F[A-Fa-f0-9]{2}(#R[A-F0-9][A-F0-9]){0,1}$ 
     11:SD_WS09 ^P9#F[A-Fa-f0-9]+ 
     12:SD_WS   ^W\d+x{0,1}#.* 
     13:RFXX10REC ^(20|29)[A-Fa-f0-9]+ 
     14:Dooya   ^P16#[A-Fa-f0-9]+ 
     15:SOMFY   ^Ys[0-9A-F]+ 
     16:SD_WS_Maverick ^P47#[A-Fa-f0-9]+ 
     17:SD_UT   ^u30#.* 
     18:FLAMINGO ^P13#[A-Fa-f0-9]+ 
     19:CUL_WS  ^K[A-Fa-f0-9]{5,} 
     1:IT       ^i...... 
     20:Revolt  ^r[A-Fa-f0-9]{22} 
     21:FS10    ^P61#[A-F0-9]+ 
     22:Siro    ^P72#[A-Fa-f0-9]+ 
     23:FHT     ^81..(04|09|0d)..(0909a001|83098301|c409c401).. 
     24:FS20    ^81..(04|0c)..0101a001 
     2:CUL_TCM97001 ^s[A-Fa-f0-9]+ 
     3:SD_RSL   ^P1#[A-Fa-f0-9]{8} 
     4:OREGON   ^(3[8-9A-F]|[4-6][0-9A-F]|7[0-8]).* 
     5:CUL_TX   ^TX.......... 
     6:SD_AS    ^P2#[A-Fa-f0-9]{7,8} 
     7:Hideki   ^P12#75[A-F0-9]+ 
     9:CUL_FHTTK ^T[A-F0-9]{8} 
     X:SIGNALduino_un ^[u]\d+#.* 
   QUEUE: 
   READINGS: 
     2017-11-16 21:39:29   ccconf          freq:433.920MHz bWidth:812KHz rAmpl:42dB sens:16dB  (DataRate:5603.79Baud) 
     2017-11-16 21:38:12   ccpatable       C3E = 00 C0 00 00 00 00 00 00  => 10_dBm 
     2017-10-30 18:06:40   ccreg           C3E = 00 34 00 00 00 00 00 00 
     2017-11-02 10:00:19   cmds            V R t X F S P C r W x e 
     2017-11-07 17:19:52   config          MS=1;MU=1;MC=1 
     2017-11-07 17:19:56   freeram         769 
     2017-11-16 21:37:34   ping            OK 
     2017-10-30 17:05:22   raw             Unsupported command 
     2017-11-16 21:43:10   state           opened 
     2017-10-30 13:07:44   uptime          0 00:04:03 
     2017-11-16 21:43:10   version         V 3.3.1-dev SIGNALduino cc1101 - compiled at Mar 10 2017 22:54:50 
   keepalive: 
     ok         1 
     retry      0 
   mcIdList: 
     10 
     11 
     12 
     43 
     47 
   msIdList: 
     0 
     1 
     17 
     2 
     3 
     33 
     38 
     4 
     51 
     7 
   muIdList: 
     16 
     30 
     37 
     39 
     44 
     45 
     5 
     50 
     8 
     9 
Attributes: 
   devStateIcon opened:WLAN_Status.1 disconnected:WLAN_Status.0 
   flashCommand avrdude -c arduino -b 57600 -P [PORT] -p atmega328p -vv -U flash:w:[HEXFILE] 2>[LOGFILE] 
   group      Gateway 
   hardware   nanoCC1101 
   room       Gateways 
   verbose    5 
   whitelist_IDs 0,1,2,3,4,5,7,8,9,10,11,12,16,17,30,33,37,38,39,43,44,45,47,50,51

Hideki device list

Code Auswählen

Internals: 
   CODE       Hideki_30_1 
   DEF        Hideki_30_1 
   IODev      sduino 
   NAME       Wohnzimmer_temp 
   NR         56 
   STATE      23.3 ºC <br> 37 % 
   TYPE       Hideki 
   lastMSG 
   READINGS: 
     2017-11-16 18:01:16   battery         ok 
     2017-11-16 18:01:16   channel         1 
     2017-11-16 18:01:16   comfort_level   Dry. Less than 40% RH 
     2017-11-16 18:01:16   humidity        37 
     2017-11-16 18:01:16   package_number  1 
     2017-11-16 18:01:16   state           T: 23.3 H: 37 
     2017-11-16 18:01:16   temperature     23.3 
Attributes: 
   IODev      sduino 
   group      Temperatur 
   icon       icoKLIMA 
   room       10_Wohnzimmer,90_Heizung,Homekit 
   stateFormat temperature ºC <br> humidity %

somfy devices list

Code Auswählen

Internals: 
   ADDRESS    12345F 
   DEF        12345F 
   IODev      sduino 
   NAME       Markise 
   NR         146 
   STATE      open 
   TYPE       SOMFY 
   move       stop 
   CODE: 
     1          12345F 
   READINGS: 
     2017-11-04 19:46:43   enc_key         AD 
     2017-11-04 19:46:43   exact           0 
     2017-10-17 19:25:07   parsestate      off 
     2017-11-04 19:46:43   position        0 
     2017-11-04 19:46:43   rolling_code    008D 
     2017-11-04 19:46:43   state           open 
Attributes: 
   IODev      sduino 
   devStateIcon open:sunblind_0@green closed:sunblind_100@red go-my:sunblind_50@orange 
   eventMap   on:Ausfahren off:Einfahren 
   genericDeviceType blind 
   model      somfyblinds 
   room       17_Terrasse,Homekit 
   verbose    5 
   webCmd     Ausfahren:Go-My:Einfahren

somfy handsender list (der empfang funktioniert)

Code Auswählen

Internals: 
   ADDRESS    28CCF6 
   DEF        28CCF6 A4 03F4 
   IODev      sduino 
   NAME       Markise_FB 
   NR         148 
   STATE      open 
   TYPE       SOMFY 
   move       stop 
   CODE: 
     1          28CCF6 
   READINGS: 
     1970-01-01 01:00:00   enc_key         A4 
     2017-10-17 19:25:07   exact           0 
     2017-11-04 10:23:42   parsestate      off 
     2017-10-17 19:25:07   position        0 
     1970-01-01 01:00:00   rolling_code    03F4 
     2017-10-17 19:25:07   state           open 
Attributes: 
   IODev      sduino 
   associated-devices Markise 
   room       17_Terrasse 
   userattr   associated-devices

die markise konnte ich schon steuern aber aus irgend eine Grund funktioniert es nicht! hatte auch schon die ganze zeit auf 433.420 umgestellt gehabt aber hat auch nichts gebracht jetzt wieder auf 433.920 umgestellt und einige unknownmessages empfangen was ist da los?

der log vom Temperatur sensor mit heidiki Modul mit dem letzten am 14.11

Code Auswählen

2017-11-14_17:38:03 Wohnzimmer_temp humidity: 34
2017-11-15_00:57:22 Wohnzimmer_temp T: 21.5 H: 36
2017-11-15_00:57:22 Wohnzimmer_temp battery: ok
2017-11-15_00:57:22 Wohnzimmer_temp channel: 1
2017-11-15_00:57:22 Wohnzimmer_temp temperature: 21.5
2017-11-15_00:57:22 Wohnzimmer_temp humidity: 36
2017-11-15_10:52:55 Wohnzimmer_temp T: 22.1 H: 36
2017-11-15_10:52:55 Wohnzimmer_temp battery: ok
2017-11-15_10:52:55 Wohnzimmer_temp channel: 1
2017-11-15_10:52:55 Wohnzimmer_temp temperature: 22.1
2017-11-15_10:52:55 Wohnzimmer_temp humidity: 36
2017-11-15_10:52:55 Wohnzimmer_temp comfort_level: Dry. Less than 40% RH
2017-11-15_10:52:55 Wohnzimmer_temp package_number: 3
2017-11-16_00:16:18 Wohnzimmer_temp T: 20.1 H: 40
2017-11-16_00:16:18 Wohnzimmer_temp battery: ok
2017-11-16_00:16:18 Wohnzimmer_temp channel: 1
2017-11-16_00:16:18 Wohnzimmer_temp temperature: 20.1
2017-11-16_00:16:18 Wohnzimmer_temp humidity: 40
2017-11-16_00:16:18 Wohnzimmer_temp comfort_level: Temperature and humidity comfortable
2017-11-16_00:16:18 Wohnzimmer_temp package_number: 1
2017-11-16_04:01:20 Wohnzimmer_temp T: 19.5 H: 41
2017-11-16_04:01:20 Wohnzimmer_temp battery: ok
2017-11-16_04:01:20 Wohnzimmer_temp channel: 1
2017-11-16_04:01:20 Wohnzimmer_temp temperature: 19.5
2017-11-16_04:01:20 Wohnzimmer_temp humidity: 41
2017-11-16_04:01:20 Wohnzimmer_temp comfort_level: Humidity OK. Temperature uncomfortable. More than 24.9°C or less than 20°C
2017-11-16_04:01:20 Wohnzimmer_temp package_number: 1
2017-11-16_04:24:59 Wohnzimmer_temp T: 19.5 H: 41
2017-11-16_04:24:59 Wohnzimmer_temp battery: ok
2017-11-16_04:24:59 Wohnzimmer_temp channel: 1
2017-11-16_04:24:59 Wohnzimmer_temp temperature: 19.5
2017-11-16_04:24:59 Wohnzimmer_temp humidity: 41
2017-11-16_04:24:59 Wohnzimmer_temp comfort_level: Humidity OK. Temperature uncomfortable. More than 24.9°C or less than 20°C
2017-11-16_04:24:59 Wohnzimmer_temp package_number: 2
2017-11-16_04:40:45 Wohnzimmer_temp T: 19.4 H: 41
2017-11-16_04:40:45 Wohnzimmer_temp battery: ok
2017-11-16_04:40:45 Wohnzimmer_temp channel: 1
2017-11-16_04:40:45 Wohnzimmer_temp temperature: 19.4
2017-11-16_04:40:45 Wohnzimmer_temp humidity: 41
2017-11-16_04:40:45 Wohnzimmer_temp comfort_level: Humidity OK. Temperature uncomfortable. More than 24.9°C or less than 20°C
2017-11-16_04:40:45 Wohnzimmer_temp package_number: 3
2017-11-16_07:25:35 Wohnzimmer_temp T: 19.3 H: 41
2017-11-16_07:25:35 Wohnzimmer_temp battery: ok
2017-11-16_07:25:35 Wohnzimmer_temp channel: 1
2017-11-16_07:25:35 Wohnzimmer_temp temperature: 19.3
2017-11-16_07:25:35 Wohnzimmer_temp humidity: 41
2017-11-16_07:25:35 Wohnzimmer_temp comfort_level: Humidity OK. Temperature uncomfortable. More than 24.9°C or less than 20°C
2017-11-16_07:25:35 Wohnzimmer_temp package_number: 1
2017-11-16_08:20:04 Wohnzimmer_temp T: 19.4 H: 42
2017-11-16_08:20:04 Wohnzimmer_temp battery: ok
2017-11-16_08:20:04 Wohnzimmer_temp channel: 1
2017-11-16_08:20:04 Wohnzimmer_temp temperature: 19.4
2017-11-16_08:20:04 Wohnzimmer_temp humidity: 42
2017-11-16_08:20:04 Wohnzimmer_temp comfort_level: Humidity OK. Temperature uncomfortable. More than 24.9°C or less than 20°C
2017-11-16_08:20:04 Wohnzimmer_temp package_number: 3
2017-11-16_11:58:39 Wohnzimmer_temp T: 22.5 H: 40
2017-11-16_11:58:39 Wohnzimmer_temp battery: ok
2017-11-16_11:58:39 Wohnzimmer_temp channel: 1
2017-11-16_11:58:39 Wohnzimmer_temp temperature: 22.5
2017-11-16_11:58:39 Wohnzimmer_temp humidity: 40
2017-11-16_11:58:39 Wohnzimmer_temp comfort_level: Temperature and humidity comfortable
2017-11-16_11:58:39 Wohnzimmer_temp package_number: 3
2017-11-16_16:08:46 Wohnzimmer_temp T: 22.5 H: 40
2017-11-16_16:08:46 Wohnzimmer_temp battery: ok
2017-11-16_16:08:46 Wohnzimmer_temp channel: 1
2017-11-16_16:08:46 Wohnzimmer_temp temperature: 22.5
2017-11-16_16:08:46 Wohnzimmer_temp humidity: 40
2017-11-16_16:08:46 Wohnzimmer_temp comfort_level: Temperature and humidity comfortable
2017-11-16_16:08:46 Wohnzimmer_temp package_number: 3
2017-11-16_16:16:39 Wohnzimmer_temp T: 22.5 H: 40
2017-11-16_16:16:39 Wohnzimmer_temp battery: ok
2017-11-16_16:16:39 Wohnzimmer_temp channel: 1
2017-11-16_16:16:39 Wohnzimmer_temp temperature: 22.5
2017-11-16_16:16:39 Wohnzimmer_temp humidity: 40
2017-11-16_16:16:39 Wohnzimmer_temp comfort_level: Temperature and humidity comfortable
2017-11-16_16:16:39 Wohnzimmer_temp package_number: 3
2017-11-16_17:04:40 Wohnzimmer_temp T: 22.3 H: 40
2017-11-16_17:04:40 Wohnzimmer_temp battery: ok
2017-11-16_17:04:40 Wohnzimmer_temp channel: 1
2017-11-16_17:04:40 Wohnzimmer_temp temperature: 22.3
2017-11-16_17:04:40 Wohnzimmer_temp humidity: 40
2017-11-16_17:04:40 Wohnzimmer_temp comfort_level: Temperature and humidity comfortable
2017-11-16_17:04:40 Wohnzimmer_temp package_number: 2
2017-11-16_18:01:16 Wohnzimmer_temp T: 23.3 H: 37
2017-11-16_18:01:16 Wohnzimmer_temp battery: ok
2017-11-16_18:01:16 Wohnzimmer_temp channel: 1
2017-11-16_18:01:16 Wohnzimmer_temp temperature: 23.3
2017-11-16_18:01:16 Wohnzimmer_temp humidity: 37
2017-11-16_18:01:16 Wohnzimmer_temp comfort_level: Dry. Less than 40% RH
2017-11-16_18:01:16 Wohnzimmer_temp package_number: 1

so sporadisch ist sicherlich nicht normal!

Kawaci · 17 November 2017, 11:01:51

Habe jetzt auch die logfile vom signalduino kopiert

Code Auswählen

2017.11.17 10:14:33 3: VZ_Stripe set HSV 0, 0, 100 with ramp: 0, flags: 
2017.11.17 10:14:57 4: sduino/keepalive ok, retry = 0
2017.11.17 10:15:03 3: VZ_Stripe RGBW LD382A set off 0
2017.11.17 10:15:03 3: VZ_Stripe RGBW LD382A dim 0 0 
2017.11.17 10:15:03 3: VZ_Stripe set HSV 0, 0, 0 with ramp: 0, flags: 
2017.11.17 10:16:00 4: sduino/KeepAlive not ok, retry = 1 -> get ping
2017.11.17 10:16:00 5: AddSendQueue: sduino: P (1)
2017.11.17 10:16:00 5: sduino SW: P
2017.11.17 10:16:00 4: sduino/msg READ: OK
2017.11.17 10:16:00 5: sduino/noMsg Parse: OK
2017.11.17 10:16:00 5: sduino/msg READ: regexp=^OK$ cmd=ping msg=OK
2017.11.17 10:16:00 4: sduino/HandleWriteQueue: nothing to send, stopping timer
2017.11.17 10:17:03 4: sduino/keepalive ok, retry = 0
2017.11.17 10:18:06 4: sduino/KeepAlive not ok, retry = 1 -> get ping
2017.11.17 10:18:06 5: AddSendQueue: sduino: P (1)
2017.11.17 10:18:06 5: sduino SW: P
2017.11.17 10:18:06 4: sduino/msg READ: OK
2017.11.17 10:18:06 5: sduino/noMsg Parse: OK
2017.11.17 10:18:06 5: sduino/msg READ: regexp=^OK$ cmd=ping msg=OK
2017.11.17 10:18:06 4: sduino/HandleWriteQueue: nothing to send, stopping timer
2017.11.17 10:19:09 4: sduino/keepalive ok, retry = 0
2017.11.17 10:20:12 4: sduino/KeepAlive not ok, retry = 1 -> get ping
2017.11.17 10:20:12 5: AddSendQueue: sduino: P (1)
2017.11.17 10:20:12 5: sduino SW: P
2017.11.17 10:20:12 4: sduino/msg READ: OK
2017.11.17 10:20:12 5: sduino/noMsg Parse: OK
2017.11.17 10:20:12 5: sduino/msg READ: regexp=^OK$ cmd=ping msg=OK
2017.11.17 10:20:12 4: sduino/HandleWriteQueue: nothing to send, stopping timer
2017.11.17 10:21:15 4: sduino/keepalive ok, retry = 0
2017.11.17 10:21:25 4: sduino/msg READ: MC;LL=-1251;LH=1274;SL=-632;SH=603;D=5026A6A6D8;C=626;L=37;R=254;
2017.11.17 10:21:26 4: sduino/msg READ: MU;P0=-729;P1=683;P2=1233;P3=-1364;P4=452;P5=116;P6=-10232;P7=-560;D=0101010102013402013205640101010101010132710431;CP=1;R=7;
2017.11.17 10:21:26 4: sduino: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2017.11.17 10:21:26 5: sduino: Starting demodulation at Position 2
2017.11.17 10:21:26 5: sduino: applying filterfunc SIGNALduino_compPattern
2017.11.17 10:21:26 4: sduino: Fingerprint for MU Protocol id 39 -> X10 Protocol matches, trying to demodulate
2017.11.17 10:21:26 5: sduino: start pattern for MU Protocol id 39 -> X10 Protocol mismatches, aborting
2017.11.17 10:21:26 4: sduino: Fingerprint for MU Protocol id 5 -> unitec6899 matches, trying to demodulate
2017.11.17 10:21:26 5: sduino: Starting demodulation at Position 39
2017.11.17 10:21:26 4: sduino: Fingerprint for MU Protocol id 50 -> optus_XT300 matches, trying to demodulate
2017.11.17 10:21:26 5: sduino: Starting demodulation at Position 9
2017.11.17 10:21:26 4: sduino: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2017.11.17 10:21:26 5: sduino: Starting demodulation at Position 1
2017.11.17 10:21:26 4: sduino: Fingerprint for MU Protocol id 9 -> CTW 600 matches, trying to demodulate
2017.11.17 10:21:26 5: sduino: Starting demodulation at Position 9
2017.11.17 10:22:18 4: sduino/keepalive ok, retry = 0
2017.11.17 10:23:21 4: sduino/KeepAlive not ok, retry = 1 -> get ping
2017.11.17 10:23:21 5: AddSendQueue: sduino: P (1)
2017.11.17 10:23:21 5: sduino SW: P
2017.11.17 10:23:21 4: sduino/msg READ: OK
2017.11.17 10:23:21 5: sduino/noMsg Parse: OK
2017.11.17 10:23:21 5: sduino/msg READ: regexp=^OK$ cmd=ping msg=OK
2017.11.17 10:23:21 4: sduino/HandleWriteQueue: nothing to send, stopping timer
2017.11.17 10:24:24 4: sduino/keepalive ok, retry = 0
2017.11.17 10:25:27 4: sduino/KeepAlive not ok, retry = 1 -> get ping
2017.11.17 10:25:27 5: AddSendQueue: sduino: P (1)
2017.11.17 10:25:27 5: sduino SW: P
2017.11.17 10:25:27 4: sduino/msg READ: OK
2017.11.17 10:25:27 5: sduino/noMsg Parse: OK
2017.11.17 10:25:27 5: sduino/msg READ: regexp=^OK$ cmd=ping msg=OK
2017.11.17 10:25:27 4: sduino/HandleWriteQueue: nothing to send, stopping timer
2017.11.17 10:26:30 4: sduino/keepalive ok, retry = 0
2017.11.17 10:27:33 4: sduino/KeepAlive not ok, retry = 1 -> get ping
2017.11.17 10:27:33 5: AddSendQueue: sduino: P (1)
2017.11.17 10:27:33 5: sduino SW: P
2017.11.17 10:27:33 4: sduino/msg READ: OK
2017.11.17 10:27:33 5: sduino/noMsg Parse: OK
2017.11.17 10:27:33 5: sduino/msg READ: regexp=^OK$ cmd=ping msg=OK
2017.11.17 10:27:33 4: sduino/HandleWriteQueue: nothing to send, stopping timer
2017.11.17 10:28:36 4: sduino/keepalive ok, retry = 0
2017.11.17 10:29:39 4: sduino/KeepAlive not ok, retry = 1 -> get ping
2017.11.17 10:29:39 5: AddSendQueue: sduino: P (1)
2017.11.17 10:29:39 5: sduino SW: P
2017.11.17 10:29:39 4: sduino/msg READ: OK
2017.11.17 10:29:39 5: sduino/noMsg Parse: OK
2017.11.17 10:29:39 5: sduino/msg READ: regexp=^OK$ cmd=ping msg=OK
2017.11.17 10:29:39 4: sduino/HandleWriteQueue: nothing to send, stopping timer
2017.11.17 10:30:42 4: sduino/keepalive ok, retry = 0
2017.11.17 10:31:45 4: sduino/KeepAlive not ok, retry = 1 -> get ping
2017.11.17 10:31:45 5: AddSendQueue: sduino: P (1)
2017.11.17 10:31:45 5: sduino SW: P
2017.11.17 10:31:45 4: sduino/msg READ: OK
2017.11.17 10:31:45 5: sduino/noMsg Parse: OK
2017.11.17 10:31:45 5: sduino/msg READ: regexp=^OK$ cmd=ping msg=OK
2017.11.17 10:31:45 4: sduino/HandleWriteQueue: nothing to send, stopping timer
2017.11.17 10:32:48 4: sduino/keepalive ok, retry = 0
2017.11.17 10:33:51 4: sduino/KeepAlive not ok, retry = 1 -> get ping
2017.11.17 10:33:51 5: AddSendQueue: sduino: P (1)
2017.11.17 10:33:51 5: sduino SW: P
2017.11.17 10:33:51 4: sduino/msg READ: OK
2017.11.17 10:33:51 5: sduino/noMsg Parse: OK
2017.11.17 10:33:51 5: sduino/msg READ: regexp=^OK$ cmd=ping msg=OK
2017.11.17 10:33:51 4: sduino/HandleWriteQueue: nothing to send, stopping timer
2017.11.17 10:34:54 4: sduino/keepalive ok, retry = 0
2017.11.17 10:35:57 4: sduino/KeepAlive not ok, retry = 1 -> get ping
2017.11.17 10:35:57 5: AddSendQueue: sduino: P (1)
2017.11.17 10:35:57 5: sduino SW: P
2017.11.17 10:35:57 4: sduino/msg READ: OK
2017.11.17 10:35:57 5: sduino/noMsg Parse: OK
2017.11.17 10:35:57 5: sduino/msg READ: regexp=^OK$ cmd=ping msg=OK
2017.11.17 10:35:57 4: sduino/HandleWriteQueue: nothing to send, stopping timer
2017.11.17 10:37:00 4: sduino/keepalive ok, retry = 0
2017.11.17 10:38:03 4: sduino/KeepAlive not ok, retry = 1 -> get ping
2017.11.17 10:38:03 5: AddSendQueue: sduino: P (1)
2017.11.17 10:38:03 5: sduino SW: P
2017.11.17 10:38:03 4: sduino/msg READ: OK
2017.11.17 10:38:03 5: sduino/noMsg Parse: OK
2017.11.17 10:38:03 5: sduino/msg READ: regexp=^OK$ cmd=ping msg=OK
2017.11.17 10:38:03 4: sduino/HandleWriteQueue: nothing to send, stopping timer
2017.11.17 10:39:06 4: sduino/keepalive ok, retry = 0
2017.11.17 10:40:09 4: sduino/KeepAlive not ok, retry = 1 -> get ping
2017.11.17 10:40:09 5: AddSendQueue: sduino: P (1)
2017.11.17 10:40:09 5: sduino SW: P
2017.11.17 10:40:09 4: sduino/msg READ: OK
2017.11.17 10:40:09 5: sduino/noMsg Parse: OK
2017.11.17 10:40:09 5: sduino/msg READ: regexp=^OK$ cmd=ping msg=OK
2017.11.17 10:40:09 4: sduino/HandleWriteQueue: nothing to send, stopping timer
2017.11.17 10:41:12 4: sduino/keepalive ok, retry = 0
2017.11.17 10:42:15 4: sduino/KeepAlive not ok, retry = 1 -> get ping
2017.11.17 10:42:15 5: AddSendQueue: sduino: P (1)
2017.11.17 10:42:15 5: sduino SW: P
2017.11.17 10:42:15 4: sduino/msg READ: OK
2017.11.17 10:42:15 5: sduino/noMsg Parse: OK
2017.11.17 10:42:15 5: sduino/msg READ: regexp=^OK$ cmd=ping msg=OK
2017.11.17 10:42:15 4: sduino/HandleWriteQueue: nothing to send, stopping timer
2017.11.17 10:43:18 4: sduino/keepalive ok, retry = 0
2017.11.17 10:44:21 4: sduino/KeepAlive not ok, retry = 1 -> get ping
2017.11.17 10:44:21 5: AddSendQueue: sduino: P (1)
2017.11.17 10:44:21 5: sduino SW: P
2017.11.17 10:44:21 4: sduino/msg READ: OK
2017.11.17 10:44:21 5: sduino/noMsg Parse: OK
2017.11.17 10:44:21 5: sduino/msg READ: regexp=^OK$ cmd=ping msg=OK
2017.11.17 10:44:21 4: sduino/HandleWriteQueue: nothing to send, stopping timer
2017.11.17 10:45:24 4: sduino/keepalive ok, retry = 0
2017.11.17 10:46:27 4: sduino/KeepAlive not ok, retry = 1 -> get ping
2017.11.17 10:46:27 5: AddSendQueue: sduino: P (1)
2017.11.17 10:46:27 5: sduino SW: P
2017.11.17 10:46:27 4: sduino/msg READ: OK
2017.11.17 10:46:27 5: sduino/noMsg Parse: OK
2017.11.17 10:46:27 5: sduino/msg READ: regexp=^OK$ cmd=ping msg=OK
2017.11.17 10:46:27 4: sduino/HandleWriteQueue: nothing to send, stopping timer
2017.11.17 10:47:30 4: sduino/keepalive ok, retry = 0
2017.11.17 10:48:33 4: sduino/KeepAlive not ok, retry = 1 -> get ping
2017.11.17 10:48:33 5: AddSendQueue: sduino: P (1)
2017.11.17 10:48:33 5: sduino SW: P
2017.11.17 10:48:33 4: sduino/msg READ: OK
2017.11.17 10:48:33 5: sduino/noMsg Parse: OK
2017.11.17 10:48:33 5: sduino/msg READ: regexp=^OK$ cmd=ping msg=OK
2017.11.17 10:48:33 4: sduino/HandleWriteQueue: nothing to send, stopping timer
2017.11.17 10:49:36 4: sduino/keepalive ok, retry = 0
2017.11.17 10:50:39 4: sduino/KeepAlive not ok, retry = 1 -> get ping
2017.11.17 10:50:39 5: AddSendQueue: sduino: P (1)
2017.11.17 10:50:39 5: sduino SW: P
2017.11.17 10:50:39 4: sduino/msg READ: OK
2017.11.17 10:50:39 5: sduino/noMsg Parse: OK
2017.11.17 10:50:39 5: sduino/msg READ: regexp=^OK$ cmd=ping msg=OK
2017.11.17 10:50:39 4: sduino/HandleWriteQueue: nothing to send, stopping timer
2017.11.17 10:51:42 4: sduino/keepalive ok, retry = 0
2017.11.17 10:52:45 4: sduino/KeepAlive not ok, retry = 1 -> get ping
2017.11.17 10:52:45 5: AddSendQueue: sduino: P (1)
2017.11.17 10:52:45 5: sduino SW: P
2017.11.17 10:52:45 4: sduino/msg READ: OK
2017.11.17 10:52:45 5: sduino/noMsg Parse: OK
2017.11.17 10:52:45 5: sduino/msg READ: regexp=^OK$ cmd=ping msg=OK
2017.11.17 10:52:45 4: sduino/HandleWriteQueue: nothing to send, stopping timer
2017.11.17 10:53:24 4: sduino/msg READ: MC;LL=-1252;LH=1300;SL=-543;SH=778;D=5F9908;C=645;L=22;R=252;
2017.11.17 10:53:48 4: sduino/keepalive ok, retry = 0
2017.11.17 10:54:51 4: sduino/KeepAlive not ok, retry = 1 -> get ping
2017.11.17 10:54:51 5: AddSendQueue: sduino: P (1)
2017.11.17 10:54:51 5: sduino SW: P
2017.11.17 10:54:51 4: sduino/msg READ: OK
2017.11.17 10:54:51 5: sduino/noMsg Parse: OK
2017.11.17 10:54:51 5: sduino/msg READ: regexp=^OK$ cmd=ping msg=OK
2017.11.17 10:54:51 4: sduino/HandleWriteQueue: nothing to send, stopping timer
2017.11.17 10:55:54 4: sduino/keepalive ok, retry = 0
2017.11.17 10:56:05 3: MyCUL433: Unknown code P12#751FBA4A08BE3F5534, help me!
2017.11.17 10:56:57 4: sduino/KeepAlive not ok, retry = 1 -> get ping
2017.11.17 10:56:57 5: AddSendQueue: sduino: P (1)
2017.11.17 10:56:57 5: sduino SW: P
2017.11.17 10:56:57 4: sduino/msg READ: OK
2017.11.17 10:56:57 5: sduino/noMsg Parse: OK
2017.11.17 10:56:57 5: sduino/msg READ: regexp=^OK$ cmd=ping msg=OK
2017.11.17 10:56:57 4: sduino/HandleWriteQueue: nothing to send, stopping timer
2017.11.17 10:58:00 4: sduino/keepalive ok, retry = 0
2017.11.17 10:59:03 4: sduino/KeepAlive not ok, retry = 1 -> get ping
2017.11.17 10:59:03 5: AddSendQueue: sduino: P (1)
2017.11.17 10:59:03 5: sduino SW: P
2017.11.17 10:59:03 4: sduino/msg READ: OK
2017.11.17 10:59:03 5: sduino/noMsg Parse: OK
2017.11.17 10:59:03 5: sduino/msg READ: regexp=^OK$ cmd=ping msg=OK
2017.11.17 10:59:03 4: sduino/HandleWriteQueue: nothing to send, stopping timer
2017.11.17 11:00:06 4: sduino/keepalive ok, retry = 0

Ralf9 · 17 November 2017, 12:11:11

Wie sieht der Empfang vom Hideki Sensor aus, wenn er sich im selben Raum wie der sduino befindet?

verbose 4 ist beim log ausreichend.

Gruß Ralf

Kawaci · 17 November 2017, 13:32:48

ich habe den heidi jetzt 5cm neben dem signalduino hingestellt und nichts die somfy fb wird erkannt wart im selben räum wie der hediki

habe einen nano cal 433mhz mit aculfw auch daneben hängen! könnten die sich stören?

Kawaci · 17 November 2017, 13:59:38

So hideki funktioniert sduino auf 433.920 gestellt und er hat ein neues hideki angelegt! Keine ahnung warum er das alte nicht mehr wollte! Jetzt hab ich aber das problem das er somfy nicht mehr nimmt da er ja für somfy 433.420 benötigt

RaspiLED · 17 November 2017, 17:35:14

Hi,
Hört er beide mit
Freq auf 433.670 und bwith grösser 500?
Gruß Arnd

Raspi2 mit FHEM, CUL, Signalduino, MySensors, HomeBridge, Presence, Bravia, ...

Kawaci · 17 November 2017, 20:16:30

@RaspiLED nein funktioniert auch nicht! nur hediki empfang

RaspiLED · 17 November 2017, 20:29:00

@kawaci: Langsam stört mich Deine Kargheit

Welche bwidth hast Du verwendet? Was sagt ccconf? Was hast Du alles versucht? Was kommt im Eventmonitor mit mindestens verbose 4...
Gruß Arnd

Raspi2 mit FHEM, CUL, Signalduino, MySensors, HomeBridge, Presence, Bravia, ...

Kawaci · 17 November 2017, 22:07:11

also sorry für die Kargheit!

der event monitor zeigt wenn ich sduino.* und log filtere folgendes an!

Code Auswählen

MU;P0=163;P2=-183;P3=123;P5=274;D=2325232325232325252525232323252525252523252523252323232323232320232020202020202020202525232025232320202320202020202020202020232023202020202020202020202520252525252025202520252523202320252523252020232025252320;CP=0;R=38;
2017.11.17 21:57:44 4 : sduino: Fingerprint for MU Protocol id 45 -> Revolt matches, trying to demodulate
2017.11.17 21:57:46 4 : sduino/msg READ: MU;P0=-211;P1=151;P2=265;D=0102020202010101020202020201020201020101010101010101010101010101010101010202010102010101010101010101010101010101010101010101010101010101010201020202020102010201020201010101020201020101010102020101;CP=1;R=35;
2017.11.17 21:57:46 4 : sduino: Fingerprint for MU Protocol id 45 -> Revolt matches, trying to demodulate
2017.11.17 21:57:49 4 : sduino/msg READ: MU;P0=157;P1=-227;P2=277;D=012101012101012121212101010121212121210121210121010101010101010101010101010101010;CP=0;R=39;
2017.11.17 21:57:49 4 : sduino: Fingerprint for MU Protocol id 45 -> Revolt matches, trying to demodulate
2017.11.17 21:57:49 4 : sduino/msg READ: MU;P0=-217;P1=173;P4=264;P5=128;D=010101010101010101040104040404050401040504040101;CP=1;R=39;
2017.11.17 21:57:49 4 : sduino: Fingerprint for MU Protocol id 45 -> Revolt matches, trying to demodulate
2017.11.17 21:57:50 3 : VZ_Stripe RGBW LD382A set on (0, 0, 100) 0
2017.11.17 21:57:50 3 : VZ_Stripe set HSV 0, 0, 100 with ramp: 0, flags:
2017.11.17 21:57:53 4 : sduino/msg READ: MU;P0=-198;P1=155;P2=278;D=0102020202010101020202020201020201010101010101010101010101010101010101010202010102010101010101010101010101010101010101010101010101010101010201020202020102010201020201010101020201010101010102010102;CP=1;R=36;
2017.11.17 21:57:53 4 : sduino: Fingerprint for MU Protocol id 45 -> Revolt matches, trying to demodulate
2017.11.17 21:57:56 4 : sduino/msg READ: MU;P0=168;P1=-195;P3=-368;P6=291;D=13016101016101016161616101010161616161610161610161010101010101010101010101010101010101616101016101010101010101010101010101010101010101010101010101010101610161616161016101610161610101010161610161010101016161010;CP=0;R=35;
2017.11.17 21:57:56 4 : sduino: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2017.11.17 21:57:56 4 : sduino: Fingerprint for MU Protocol id 45 -> Revolt matches, trying to demodulate
2017.11.17 21:58:00 4 : sduino/msg READ: MU;P0=290;P1=-191;P2=137;D=210121210111210101010111212101010101012101011101211121211121211121211121112121112111010121110111212121212121212121212121212121212121212121212121212121012101010101210121012101012121212101012101212121210101212;CP=2;R=36;
2017.11.17 21:58:00 4 : sduino: Fingerprint for MU Protocol id 45 -> Revolt matches, trying to demodulate
2017.11.17 21:58:03 4 : sduino/msg READ: MU;P0=-192;P2=9980;P3=-360;P4=151;P6=278;D=23406040406040406060606040404060606060604060604060404040404040404040404040404040404040606040406040404040404040404040404040404040404040404040404040404040604060606060406040604060604040404060604060404040406060404;CP=4;R=36;
2017.11.17 21:58:03 4 : sduino: Fingerprint for MU Protocol id 45 -> Revolt matches, trying to demodulate
2017.11.17 21:58:03 4 : sduino: decoded matched MU Protocol id 45 dmsg r49E3ED00003200000017AB length 88 RSSI = -56
2017.11.17 21:58:04 4 : sduino/msg READ: MS;P2=499;P3=-8665;P5=-3838;P6=-1950;D=2325262625262626262625262526262625262626262525262626252526262625262526252525;CP=2;SP=3;R=31;O;
2017.11.17 21:58:04 4 : sduino: Matched MS Protocol id 0 -> weather1
2017.11.17 21:58:04 4 : sduino: Decoded MS Protocol id 0 dmsg s90510C62B800 length 40 RSSI = -58.5
2017.11.17 21:58:04 4 : CUL_TCM97001 using longid: 1 model: Prologue
2017.11.17 21:58:04 4 : sduino/msg READ: MU;P0=513;P3=-8612;P5=-3892;P6=-1983;D=6060605060606060505060606050506060605060506050505030506060506060606060506050606060506060606;CP=0;R=18;O;
2017.11.17 21:58:05 4 : sduino/msg READ: MS;P0=384;P1=-1960;P2=467;P3=-3892;P4=-8638;D=2423212123212121212123212321210103212121212323212121232321212123212301030323;CP=2;SP=4;R=26;
2017.11.17 21:58:05 4 : sduino: Matched MS Protocol id 0 -> weather1
2017.11.17 21:58:07 4 : sduino/msg READ: MU;P0=-214;P1=142;P5=273;D=0105010105010105050505010101050505050501050501050101010101010101010101010101010101010505010105010101010101010101010101010101010101010101010101010101010501050505050105010501050501010101050501050101010105050101;CP=1;R=39;
2017.11.17 21:58:07 4 : sduino: Fingerprint for MU Protocol id 45 -> Revolt matches, trying to demodulate

ohne filter kommt das

Code Auswählen

2017-11-17 22:00:01 Revolt LG_TV power: 45.5
2017.11.17 22:00:02 4 : sduino/msg READ: MU;P0=-192;P1=160;P3=273;D=0103030303010101030303010301030103030101010101010101010101010101010101010303010103010101010101010101010101010101010101010101010101010101010301030303010103010301030101010101030103030101010103010301;CP=1;R=39;
2017.11.17 22:00:02 4 : sduino: Fingerprint for MU Protocol id 45 -> Revolt matches, trying to demodulate
2017-11-17 22:00:02 CUL_HM Bad_temp actuator: 0
2017-11-17 22:00:02 CUL_HM HM_230BB9_Climate 0
2017-11-17 22:00:02 CUL_HM HZK_Bad ValveDesired: 0
2017-11-17 22:00:02 CUL_HM HZK_Bad set_0
2017-11-17 22:00:02 readingsGroup ZE.Batterie HZK_Bad.battery: image/svg+xml  	 	 	 	 	 	 	 	 	 	 	 	 	 	 	 	    
2017-11-17 22:00:02 CUL_HM HZK_Bad ValvePosition: 0
2017-11-17 22:00:02 CUL_HM HZK_Bad battery: ok
2017-11-17 22:00:02 CUL_HM HZK_Bad motor: stop
2017-11-17 22:00:02 CUL_HM HZK_Bad motorErr: ok
2017-11-17 22:00:02 CUL_HM HZK_Bad operState: onTarget
2017-11-17 22:00:02 CUL_HM HZK_Bad 0
2017.11.17 22:00:02 4 : sduino/msg READ: MU;P0=-1808;P1=579;P4=-3883;P5=404;P6=-1000;D=01010145454101410101010101014101010101016;CP=1;R=2;
2017.11.17 22:00:02 4 : sduino: Fingerprint for MU Protocol id 39 -> X10 Protocol matches, trying to demodulate
2017.11.17 22:00:02 4 : sduino: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2017-11-17 22:00:03 ESPEasy ESPEasy_PIR_Motion Mot: off
2017.11.17 22:00:03 4 : sduino/msg READ: MU;P0=-116;P1=160;P2=-3946;P3=431;P4=-2086;P6=-15660;P7=120;D=012323434323232343234343434343432343436347;CP=3;R=18;
2017.11.17 22:00:03 4 : sduino/msg READ: MU;P0=159;P3=548;P4=-2112;P5=-3820;P6=-8624;P7=410;D=3343534353535353536353474353535343534343404;CP=3;R=12;
2017.11.17 22:00:03 4 : sduino/msg READ: MU;P0=412;P1=-2066;P2=116;P3=-3842;P4=556;P6=200;P7=-116;D=01012341414141414343014341434141410103610303434347;CP=4;R=242;
2017.11.17 22:00:03 4 : sduino: Fingerprint for MU Protocol id 39 -> X10 Protocol matches, trying to demodulate
2017.11.17 22:00:05 4 : sduino/msg READ: MU;P0=-201;P1=169;P2=299;D=010202010102010101010101010101010101010101010101010101010101010101010201020202020102010201020201010101020201020101010102020101;CP=1;R=39;
2017.11.17 22:00:05 4 : sduino: Fingerprint for MU Protocol id 45 -> Revolt matches, trying to demodulate
2017.11.17 22:00:09 4 : sduino/msg READ: MU;P0=-187;P1=274;P3=153;D=03030303030333030131030331330303030303033303030303030303030103030303030303030303030103010101010301030103010103030303010103010303030301010303;CP=3;R=38;
2017.11.17 22:00:09 4 : sduino: Fingerprint for MU Protocol id 45 -> Revolt matches, trying to demodulate
2017-11-17 22:00:09 structure Heizung_OG initialized
2017-11-17 22:00:09 EQ3BT HZK_Couch valvePosition: 0
2017.11.17 22:00:12 4 : sduino/msg READ: MU;P0=149;P1=-218;P7=257;D=017101017101017171717101010171717171710171710101010101010101010101010101010101010;CP=0;R=36;
2017.11.17 22:00:12 4 : sduino: Fingerprint for MU Protocol id 45 -> Revolt matches, trying to demodulate
2017.11.17 22:00:12 4 : sduino/msg READ: MU;P0=-198;P1=176;P2=128;P3=278;D=010201010201010101030203030303010302030203030102030101010102010301020302030303030103020302030301020301010101020103010203;CP=1;R=39;
2017.11.17 22:00:12 4 : sduino: Fingerprint for MU Protocol id 45 -> Revolt matches, trying to demodulate
2017-11-17 22:00:14 Revolt LG_TV power: 46.4
2017-11-17 22:00:15 structure Heizung_UG initialized
2017-11-17 22:00:15 EQ3BT HZK_Vorraum consumption: 848.855
2017-11-17 22:00:15 structure Heizung_UG initialized
2017-11-17 22:00:15 EQ3BT HZK_Vorraum consumptionToday: 54.757
2017-11-17 22:00:15 structure Heizung_UG initialized
2017-11-17 22:00:15 EQ3BT HZK_Vorraum valvePosition: 5
2017-11-17 22:00:15 DOIF N_Licht2 wait_timer: no timer
2017.11.17 22:00:15 3 : VZ_Stripe RGBW LD382A set off 02017.11.17 22:00:15 3 : VZ_Stripe RGBW LD382A dim 0 0 2017.11.17 22:00:15 3 : VZ_Stripe set HSV 0, 0, 0 with ramp: 0, flags: 2017-11-17 22:00:15 WifiLight VZ_Stripe off
2017-11-17 22:00:15 DOIF N_Licht2 cmd_nr: 1
2017-11-17 22:00:15 DOIF N_Licht2 cmd_seqnr: 2
2017-11-17 22:00:15 DOIF N_Licht2 cmd: 1.2
2017-11-17 22:00:15 DOIF N_Licht2 cmd_event: ESPEasy_PIR_Motion2
2017-11-17 22:00:15 DOIF N_Licht2 cmd_1
2017.11.17 22:00:16 4 : sduino/msg READ: MU;P0=160;P2=-356;P4=-206;P5=282;D=2045404045404045454545404040454545454540454540454040404040404040404040404040404040404545404045404040404040404040404040404040404040404040404040404040404540454545454045404540454540404040454540454040404045454040;CP=0;R=38;
2017.11.17 22:00:16 4 : sduino: Fingerprint for MU Protocol id 45 -> Revolt matches, trying to demodulate
2017.11.17 22:00:19 4 : sduino/msg READ: MU;P0=-184;P2=152;P5=287;D=02020202020202020202020202020202020202020502050505050205020502050502020202050502050202020205050202;CP=2;R=37;
2017.11.17 22:00:19 4 : sduino: Fingerprint for MU Protocol id 45 -> Revolt matches, trying to demodulate
2017.11.17 22:00:22 4 : sduino/msg READ: MU;P0=145;P1=-206;P4=298;P5=-8048;P6=9972;P7=-364;D=4567014101014101014141414101010141414141410141410141010101010101010101010101010101010101414101014101010101010101010101010101010101010101010101010101010101410141414141014101410141410101010141410141010101014141010;CP=0;R=35;
2017.11.17 22:00:22 4 : sduino: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2017.11.17 22:00:22 4 : sduino: Fingerprint for MU Protocol id 45 -> Revolt matches, trying to demodulate
2017.11.17 22:00:22 4 : sduino: decoded matched MU Protocol id 45 dmsg r49E3ED00003200000017AB length 88 RSSI = -56.5
2017-11-17 22:00:25 DOIF N_Licht wait_timer: no timer
2017.11.17 22:00:25 3 : VZ_Stripe RGBW LD382A set off 02017.11.17 22:00:25 3 : VZ_Stripe RGBW LD382A dim 0 0 2017.11.17 22:00:25 3 : VZ_Stripe set HSV 0, 0, 0 with ramp: 0, flags: 2017-11-17 22:00:25 DOIF N_Licht cmd_nr: 1
2017-11-17 22:00:25 DOIF N_Licht cmd_seqnr: 2
2017-11-17 22:00:25 DOIF N_Licht cmd: 1.2
2017-11-17 22:00:25 DOIF N_Licht cmd_event: ESPEasy_PIR_Motion
2017-11-17 22:00:25 DOIF N_Licht cmd_1
2017.11.17 22:00:26 4 : sduino/msg READ: MU;P0=159;P2=-368;P4=-208;P5=298;D=2045404045404045454545404040454545454540454540454040404040404040404040404040404040404545404045404040404040404040404040404040404040404040404040404040404540454545454045404540454540404040454540454040404045454040;CP=0;R=39;
2017.11.17 22:00:26 4 : sduino: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2017.11.17 22:00:26 4 : sduino: Fingerprint for MU Protocol id 45 -> Revolt matches, trying to demodulate
2017.11.17 22:00:26 4 : sduino/msg READ: MU;P0=927;P2=-575;P3=476;P4=340;P6=256;P7=-1016;D=002323242676242424207024247073207073202373202323;CP=0;R=13;
2017.11.17 22:00:26 4 : sduino: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2017.11.17 22:00:26 4 : sduino: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2017.11.17 22:00:26 4 : sduino/msg READ: MC;LL=-1035;LH=919;SL=-515;SH=442;D=60B0755EA8;C=485;L=37;R=20;
2017.11.17 22:00:26 4 : sduino/msg READ: MU;P0=-734;P1=850;P2=-1093;P3=-544;P4=433;P5=251;P6=-4752;D=01213434243134343434243434343121343421243565012505;CP=4;R=18;
2017.11.17 22:00:26 4 : sduino: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate
2017.11.17 22:00:26 4 : sduino: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2017.11.17 22:00:26 4 : sduino: Fingerprint for MU Protocol id 39 -> X10 Protocol matches, trying to demodulate
2017.11.17 22:00:26 4 : sduino: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2017.11.17 22:00:26 4 : sduino/msg READ: MU;P0=549;P1=-460;P2=993;P3=-995;P4=419;D=01010123230101012341414323412141414143010123232323010101232301010123012301234;CP=0;R=13;
2017.11.17 22:00:26 4 : sduino: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate
2017.11.17 22:00:26 4 : sduino: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2017.11.17 22:00:26 4 : sduino: Fingerprint for MU Protocol id 37 -> Bresser 7009994 matches, trying to demodulate
2017.11.17 22:00:26 4 : sduino: Fingerprint for MU Protocol id 5 -> unitec6899 matches, trying to demodulate
2017.11.17 22:00:26 4 : sduino: Fingerprint for MU Protocol id 50 -> optus_XT300 matches, trying to demodulate
2017.11.17 22:00:26 4 : sduino: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2017.11.17 22:00:26 4 : sduino: Fingerprint for MU Protocol id 9 -> CTW 600 matches, trying to demodulate
2017.11.17 22:00:26 4 : sduino/msg READ: MU;P0=-536;P1=887;P2=-1684;P3=425;P4=-7416;P5=156;P6=-1060;P7=260;D=345670167210703610303630103030303616301030303036303;CP=3;R=0;
2017.11.17 22:00:26 4 : sduino: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate
2017.11.17 22:00:26 4 : sduino: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2017.11.17 22:00:26 4 : sduino: Fingerprint for MU Protocol id 39 -> X10 Protocol matches, trying to demodulate
2017.11.17 22:00:26 4 : sduino: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2017-11-17 22:00:27 structure Heizung_OG initialized

ccconfg ergibt

Code Auswählen

ccconf: freq:433.670MHz bWidth:812KHz rAmpl:42dB sens:8dB (DataRate:3173.83Baud)

ccpatable ergibt

Code Auswählen

ccpatable: C3E = 00 C0 00 00 00 00 00 00 => 10_dBm

habe wärend das der eventlog lief die fb von der markise gedrückt und nichts ist angekommen!

habe alle parameter die mir bekannt sind einstellen versucht die db von rampl geändert und so weiter!

hoffe es sind genug Daten für Fehler Analyse!