Autor Thema: [74_XiaomiBTLESens.pm] Xiaomi Bluetooth Sensoren FlowerSens/Thermometer  (Gelesen 59790 mal)

Offline CoolTux

  • Developer
  • Hero Member
  • ****
  • Beiträge: 22929
Antw:[74_XiaomiBTLESens.pm] Xiaomi Bluetooth Sensoren FlowerSens/Thermometer
« Antwort #630 am: 11 Dezember 2018, 14:36:44 »
Habe mal kurz gegoogelt
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://paypal.me/pools/c/8gULisr9BT
FHEM GitHub: https://github.com/fhem/
kein Support für cfg Editierer

Offline Teamdrachen

  • Jr. Member
  • **
  • Beiträge: 70
Antw:[74_XiaomiBTLESens.pm] Xiaomi Bluetooth Sensoren FlowerSens/Thermometer
« Antwort #631 am: 11 Dezember 2018, 15:29:27 »
Danke, aber das hab ich schon versucht... ohne Erfolg

Offline Neuhier

  • Full Member
  • ***
  • Beiträge: 415
Antw:[74_XiaomiBTLESens.pm] Xiaomi Bluetooth Sensoren FlowerSens/Thermometer
« Antwort #632 am: 11 Dezember 2018, 20:33:49 »
Vielleicht doch irgendwo einen Gateway im Haus?
Aus Versehen mit dem Smartphone o.ä. "gefunden" ?

Offline Teamdrachen

  • Jr. Member
  • **
  • Beiträge: 70
Antw:[74_XiaomiBTLESens.pm] Xiaomi Bluetooth Sensoren FlowerSens/Thermometer
« Antwort #633 am: 12 Dezember 2018, 09:12:36 »
kein Gateway im Haus und im Moment auch kein Smartphone.
Ich sitz 50km entfernt, der Sensor 70cm

Edit:
Ich habe einen der zwei Sensoren in FHEM disabled und bekomme vom anderen Daten.

Edit2:
ich habs...

nach dem ich alle Versionen von bluez getestet, das Netz nach dem Fehler durchsucht und mit dem Thema fast abgeschlossen habe bzw. einen pi Zero testen wollte.

Bei Sensor 2.. dem der disabled wurde fehlte in FHEM 1 Ziffer in der MAC  ::)

die fehlerhafte Abfrage hat dann Gatttool abgeschossen
« Letzte Änderung: 12 Dezember 2018, 13:02:17 von Teamdrachen »
Hilfreich Hilfreich x 1 Liste anzeigen

Offline stole

  • New Member
  • *
  • Beiträge: 10
Antw:[74_XiaomiBTLESens.pm] Xiaomi Bluetooth Sensoren FlowerSens/Thermometer
« Antwort #634 am: 21 Dezember 2018, 07:24:46 »
Hallo,

Ich habe gerade mein Mijia angekoppelt, die Temperatur richtig angezeigt aber die Feuchtigkeit komisch

Kann mir jemand dabei helfen?

Offline CoolTux

  • Developer
  • Hero Member
  • ****
  • Beiträge: 22929
Antw:[74_XiaomiBTLESens.pm] Xiaomi Bluetooth Sensoren FlowerSens/Thermometer
« Antwort #635 am: 21 Dezember 2018, 08:05:07 »
Wenn ich das richtig gelesen habe ist das ein Branding. Original soll es Xiaomi sein. Kannst Du mir bitte ein verbose 5 geben. Brauche die ausgelesenen Werte.
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://paypal.me/pools/c/8gULisr9BT
FHEM GitHub: https://github.com/fhem/
kein Support für cfg Editierer

Offline stole

  • New Member
  • *
  • Beiträge: 10
Antw:[74_XiaomiBTLESens.pm] Xiaomi Bluetooth Sensoren FlowerSens/Thermometer
« Antwort #636 am: 22 Dezember 2018, 09:31:02 »
Wenn ich das richtig gelesen habe ist das ein Branding. Original soll es Xiaomi sein. Kannst Du mir bitte ein verbose 5 geben. Brauche die ausgelesenen Werte.

Hi CoolTux,

Danke für die schnelle Antwort.

Was meinst du genau mit Branding, dass Device kein Xiaomi ist? Weil es von außen definitiv als Xiaomi aussieht, und auch mit Xiaomi Handy App richtig verbindet.

Kann es sein wegen Firmware?

Ich mache verbose 5 so schnell wie möglich, gerade bin ich unterwegs.

Offline CoolTux

  • Developer
  • Hero Member
  • ****
  • Beiträge: 22929
Antw:[74_XiaomiBTLESens.pm] Xiaomi Bluetooth Sensoren FlowerSens/Thermometer
« Antwort #637 am: 22 Dezember 2018, 09:45:21 »
Es ist schon ein Xiaomi, nur wurde es von einer Firma als thirdpart eingekauft und die macht dann ihr eigenes Logo drauf und verkauft es so. Es wird aber voll umfänglich Xiaomi, inklusive Firmware.
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://paypal.me/pools/c/8gULisr9BT
FHEM GitHub: https://github.com/fhem/
kein Support für cfg Editierer

Offline stole

  • New Member
  • *
  • Beiträge: 10
Antw:[74_XiaomiBTLESens.pm] Xiaomi Bluetooth Sensoren FlowerSens/Thermometer
« Antwort #638 am: 23 Dezember 2018, 10:36:39 »
Wenn ich das richtig gelesen habe ist das ein Branding. Original soll es Xiaomi sein. Kannst Du mir bitte ein verbose 5 geben. Brauche die ausgelesenen Werte.

2018.12.23 06:53:41 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 32 20 48 3d 36 36 2e 35 00 "}
2018.12.23 06:53:41 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 06:53:41 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 06:53:41 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 06:53:41 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 06:56:11 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 06:56:11 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 06:56:11 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 06:56:11 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 06:56:21 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 06:56:21 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 06:56:21 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 32 20 48 3d 36 36 2e 37 00 "}
2018.12.23 06:56:21 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 06:56:21 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 06:56:21 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 06:56:21 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 07:00:58 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 07:00:58 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 07:00:58 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 07:00:58 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 07:01:01 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result connect error,Transport endpoint is not connected (107)
2018.12.23 07:01:01 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 1
2018.12.23 07:01:11 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 07:01:11 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 07:01:11 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 32 20 48 3d 36 36 2e 38 00 "}
2018.12.23 07:01:11 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 07:01:11 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 07:01:11 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 07:01:11 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 07:04:05 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 07:04:05 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 07:04:05 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 07:04:05 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 07:04:15 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 07:04:15 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 07:04:15 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 32 20 48 3d 36 36 2e 38 00 "}
2018.12.23 07:04:15 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 07:04:15 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 07:04:15 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 07:04:15 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 07:07:03 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 07:07:03 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 07:07:03 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 07:07:04 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 07:07:14 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 07:07:14 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 07:07:14 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 31 20 48 3d 36 36 2e 39 00 "}
2018.12.23 07:07:14 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 07:07:14 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 07:07:14 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 07:07:14 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 07:11:26 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 07:11:26 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 07:11:26 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 07:11:26 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 07:11:37 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 07:11:37 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 07:11:37 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 31 20 48 3d 36 36 2e 37 00 "}
2018.12.23 07:11:37 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 07:11:37 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 07:11:37 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 07:11:37 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 07:14:49 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 07:14:49 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 07:14:49 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 07:14:50 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 07:15:00 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 07:15:00 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 07:15:00 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 32 20 48 3d 36 36 2e 35 00 "}
2018.12.23 07:15:00 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 07:15:00 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 07:15:00 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 07:15:00 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 07:19:54 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 07:19:54 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 07:19:54 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 07:19:55 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 07:20:05 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 07:20:05 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 07:20:05 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 31 20 48 3d 36 36 2e 37 00 "}
2018.12.23 07:20:05 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 07:20:05 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 07:20:05 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 07:20:05 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 07:26:26 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 07:26:26 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 07:26:26 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 07:26:27 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 07:26:37 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 07:26:37 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 07:26:37 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 31 20 48 3d 36 36 2e 39 00 "}
2018.12.23 07:26:37 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 07:26:37 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 07:26:37 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 07:26:37 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 07:31:52 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 07:31:53 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 07:31:53 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 07:31:53 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 07:32:03 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 07:32:03 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 07:32:03 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 32 20 48 3d 36 36 2e 38 00 "}
2018.12.23 07:32:03 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 07:32:03 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 07:32:03 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 07:32:03 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 07:36:24 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 07:36:24 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 07:36:24 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 07:36:24 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 07:36:34 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 07:36:34 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 07:36:34 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 31 20 48 3d 36 36 2e 37 00 "}
2018.12.23 07:36:34 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 07:36:34 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 07:36:34 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 07:36:34 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 07:39:50 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 07:39:50 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 07:39:50 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 07:39:50 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 07:40:00 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 07:40:00 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 07:40:00 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 31 20 48 3d 36 36 2e 38 00 "}
2018.12.23 07:40:00 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 07:40:00 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 07:40:00 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 07:40:00 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 07:42:43 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 07:42:43 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 07:42:43 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 07:42:43 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 07:42:53 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result
2018.12.23 07:42:53 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 1
2018.12.23 07:43:03 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 07:43:03 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 07:43:03 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 31 20 48 3d 36 36 2e 39 00 "}
2018.12.23 07:43:03 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 07:43:03 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 07:43:03 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 07:43:03 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 07:46:31 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 07:46:31 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 07:46:31 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 07:46:31 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 07:46:41 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 07:46:41 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 07:46:41 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 31 20 48 3d 36 36 2e 34 00 "}
2018.12.23 07:46:41 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 07:46:41 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 07:46:41 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 07:46:41 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 07:51:11 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 07:51:11 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 07:51:11 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 07:51:11 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 07:51:21 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 07:51:21 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 07:51:21 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 31 20 48 3d 36 36 2e 39 00 "}
2018.12.23 07:51:21 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 07:51:21 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 07:51:21 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 07:51:21 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 07:54:09 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 07:54:09 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 07:54:09 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 07:54:09 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 07:54:19 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 07:54:19 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 07:54:19 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 32 20 48 3d 36 36 2e 35 00 "}
2018.12.23 07:54:19 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 07:54:19 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 07:54:19 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 07:54:19 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 08:00:53 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 08:00:53 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 08:00:53 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 08:00:53 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 08:01:03 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 08:01:03 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 08:01:03 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 31 20 48 3d 36 36 2e 39 00 "}
2018.12.23 08:01:03 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 08:01:03 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 08:01:03 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 08:01:03 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 08:03:04 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 08:03:04 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 08:03:04 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 08:03:04 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 08:03:14 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 08:03:14 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 08:03:14 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 31 20 48 3d 36 36 2e 36 00 "}
2018.12.23 08:03:14 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 08:03:14 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 08:03:14 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 08:03:14 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 08:06:15 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 08:06:15 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 08:06:15 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 08:06:15 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 08:06:25 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 08:06:25 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 08:06:25 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 32 20 48 3d 36 37 2e 30 00 "}
2018.12.23 08:06:25 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 08:06:25 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 08:06:25 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 08:06:25 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 08:09:01 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 08:09:01 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 08:09:01 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 08:09:01 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 08:09:11 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 08:09:11 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 08:09:11 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 31 20 48 3d 36 36 2e 39 00 "}
2018.12.23 08:09:11 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 08:09:11 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 08:09:11 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 08:09:11 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 08:15:02 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 08:15:02 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 08:15:02 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 08:15:02 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 08:15:13 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 08:15:13 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 08:15:13 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 31 20 48 3d 36 36 2e 38 00 "}
2018.12.23 08:15:13 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 08:15:13 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 08:15:13 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 08:15:13 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 08:21:17 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 08:21:17 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 08:21:17 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 08:21:17 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 08:21:27 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 08:21:27 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 08:21:27 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 31 20 48 3d 36 36 2e 36 00 "}
2018.12.23 08:21:27 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 08:21:27 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 08:21:27 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 08:21:27 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 08:28:15 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 08:28:15 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 08:28:15 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 08:28:15 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 08:28:25 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 08:28:25 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 08:28:25 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 31 20 48 3d 36 36 2e 36 00 "}
2018.12.23 08:28:25 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 08:28:25 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 08:28:25 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 08:28:25 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 08:33:20 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 08:33:20 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 08:33:20 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 08:33:20 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 08:33:30 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 08:33:30 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 08:33:30 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 31 20 48 3d 36 36 2e 36 00 "}
2018.12.23 08:33:30 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 08:33:30 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 08:33:30 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 08:33:30 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 08:39:22 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 08:39:22 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 08:39:22 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 08:39:22 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 08:39:32 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 08:39:32 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 08:39:32 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 31 20 48 3d 36 36 2e 33 00 "}
2018.12.23 08:39:33 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 08:39:33 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 08:39:33 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 08:39:33 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 08:44:01 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 08:44:01 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 08:44:01 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 08:44:01 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 08:44:12 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 08:44:12 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 08:44:12 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 31 20 48 3d 36 36 2e 39 00 "}
2018.12.23 08:44:12 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 08:44:12 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 08:44:12 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 08:44:12 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 08:46:40 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 08:46:40 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 08:46:40 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 08:46:41 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 08:46:51 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 08:46:51 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 08:46:51 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 31 20 48 3d 36 36 2e 35 00 "}
2018.12.23 08:46:51 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 08:46:51 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 08:46:51 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 08:46:51 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 08:49:13 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 08:49:13 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 08:49:13 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 08:49:14 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 08:49:17 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result connect error,Function not implemented (38)
2018.12.23 08:49:17 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 1
2018.12.23 08:49:23 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result connect error,Function not implemented (38)
2018.12.23 08:49:23 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 2
2018.12.23 08:49:33 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 08:49:33 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 08:49:33 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 31 20 48 3d 36 36 2e 39 00 "}
2018.12.23 08:49:33 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 08:49:33 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 08:49:33 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 08:49:33 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 08:55:45 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 08:55:45 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 08:55:45 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 08:55:46 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 08:55:56 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 08:55:56 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 08:55:56 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 31 20 48 3d 36 36 2e 34 00 "}
2018.12.23 08:55:56 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 08:55:56 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 08:55:56 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 08:55:56 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 09:01:39 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 09:01:40 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 09:01:40 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 09:01:40 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 09:01:50 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 09:01:50 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 09:01:50 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 31 20 48 3d 36 36 2e 38 00 "}
2018.12.23 09:01:50 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 09:01:50 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 09:01:50 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 09:01:50 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 09:04:34 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 09:04:34 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 09:04:34 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 09:04:34 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 09:04:44 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 09:04:44 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 09:04:44 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 32 20 48 3d 36 36 2e 37 00 "}
2018.12.23 09:04:44 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 09:04:44 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 09:04:44 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 09:04:44 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 09:07:11 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 09:07:11 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 09:07:11 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 09:07:11 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 09:07:21 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 09:07:21 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 09:07:21 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 31 20 48 3d 36 36 2e 36 00 "}
2018.12.23 09:07:21 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 09:07:21 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 09:07:21 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 09:07:21 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 09:12:56 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 09:12:56 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 09:12:56 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 09:12:56 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 09:13:06 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 09:13:06 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 09:13:06 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 31 20 48 3d 36 36 2e 35 00 "}
2018.12.23 09:13:06 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 09:13:06 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 09:13:06 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 09:13:06 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 09:16:22 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 09:16:22 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 09:16:22 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 09:16:22 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 09:16:32 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 09:16:32 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 09:16:32 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 31 20 48 3d 36 36 2e 36 00 "}
2018.12.23 09:16:32 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 09:16:32 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 09:16:32 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 09:16:32 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 09:21:34 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 09:21:34 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 09:21:34 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 09:21:34 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 09:21:44 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 09:21:44 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 09:21:44 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 31 20 48 3d 36 36 2e 34 00 "}
2018.12.23 09:21:44 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 09:21:44 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 09:21:44 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 09:21:44 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 09:25:25 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 09:25:25 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 09:25:25 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 09:25:25 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 09:25:35 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 09:25:35 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 09:25:35 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"no data respon
se"}
2018.12.23 09:25:35 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 09:25:35 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 09:25:35 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 09:25:35 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 09:25:35 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 09:31:44 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 09:31:44 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 09:31:44 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 09:31:44 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 09:31:54 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 09:31:54 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 09:31:54 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 30 20 48 3d 36 36 2e 32 00 "}
2018.12.23 09:31:54 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 09:31:54 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 09:31:54 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 09:31:54 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 09:38:19 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 09:38:19 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 09:38:19 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 09:38:19 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 09:38:29 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 09:38:29 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 09:38:29 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 32 20 48 3d 36 36 2e 32 00 "}
2018.12.23 09:38:29 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 09:38:29 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 09:38:29 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 09:38:29 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 09:42:38 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 09:42:38 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 09:42:38 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 09:42:38 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 09:42:48 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 09:42:48 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 09:42:48 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 31 20 48 3d 36 36 2e 34 00 "}
2018.12.23 09:42:48 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 09:42:48 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 09:42:48 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 09:42:48 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 09:49:23 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 09:49:23 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 09:49:23 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 09:49:23 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 09:49:33 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 09:49:33 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 09:49:33 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 31 20 48 3d 36 36 2e 34 00 "}
2018.12.23 09:49:33 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 09:49:33 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 09:49:33 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 09:49:33 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 09:54:47 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 09:54:47 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 09:54:47 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 09:54:47 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 09:54:57 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 09:54:57 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
« Letzte Änderung: 23 Dezember 2018, 12:38:09 von stole »

Offline rani22

  • New Member
  • *
  • Beiträge: 23
Antw:[74_XiaomiBTLESens.pm] Xiaomi Bluetooth Sensoren FlowerSens/Thermometer
« Antwort #639 am: 23 Dezember 2018, 12:25:08 »
Die beiden Pflanzensensoren habe ich integriert, jedoch bei den Temperatur und Feuchtesensoren komme ich nicht weiter.
2018.12.23 12:17:18 3: XiaomiBTLESens (Floribunda) - defined with BTMAC C4:7C:8D:61:9C:D0
2018.12.23 12:17:18 3: XiaomiBTLESens (Beaucarnea) - defined with BTMAC C4:7C:8D:61:7C:FF
2018.12.23 12:17:18 3: XiaomiBTLESens (test1) - defined with BTMAC 4C:65:A8:D2:64:7E
2018.12.23 12:17:18 3: XiaomiBTLESens (test1) - set interval to 120
2018.12.23 12:17:18 3: XiaomiBTLESens (test2) - defined with BTMAC 4C:65:A8:D6:77:51
2018.12.23 12:17:18 3: XiaomiBTLESens (test3) - defined with BTMAC 4C:65:A8:D2:2C:0C
2018.12.23 12:17:18 3: XiaomiBTLESens (test4) - defined with BTMAC 4C:65:A8:DA:A1:86
2018.12.23 12:17:18 1: Including /opt/loxberry/data/plugins/fhem/fhem.save
2018.12.23 12:17:18 1: usb create starting
2018.12.23 12:17:18 3: Probing ZWDongle device /dev/serial1
2018.12.23 12:17:18 3: Probing CUL device /dev/ttyAMA0
2018.12.23 12:17:18 3: Probing TCM_ESP3 device /dev/ttyAMA0
2018.12.23 12:17:19 3: Probing ZWDongle device /dev/ttyAMA0
2018.12.23 12:17:19 3: Probing FRM device /dev/ttyAMA0
2018.12.23 12:17:24 1: usb create end
2018.12.23 12:17:24 4: XiaomiBTLESens (test1) - Run CreateParamGatttool with mod: read
2018.12.23 12:17:24 5: XiaomiBTLESens (test1) - Read XiaomiBTLESens_ExecGatttool_Run test1|4C:65:A8:D2:64:7E|read|0x24
2018.12.23 12:17:24 4: XiaomiBTLESens (test1) - stateRequestTimer: Call Request Timer
2018.12.23 12:17:24 0: Featurelevel: 5.9
2018.12.23 12:17:24 0: Server started with 15 defined entities (fhem.pl:18029/2018-12-22 perl:5.024001 os:linux user:loxberry pid:955)
2018.12.23 12:17:24 5: XiaomiBTLESens (test1) - ExecGatttool_Run: call gatttool with command: gatttool -i hci0 -b 4C:65:A8:D2:64:7E --char-read -a 0x24 2>&1 /dev/null and loop 0
2018.12.23 12:17:31 5: XiaomiBTLESens (test1) - ExecGatttool_Run: gatttool loop result connect error,Invalid argument (22)

2018.12.23 12:17:31 5: XiaomiBTLESens (test1) - ExecGatttool_Run: call gatttool with command: gatttool -i hci0 -b 4C:65:A8:D2:64:7E --char-read -a 0x24 2>&1 /dev/null and loop 1
2018.12.23 12:17:31 5: XiaomiBTLESens (test1) - ExecGatttool_Run: gatttool loop result connect error,Invalid argument (22)

2018.12.23 12:17:31 5: XiaomiBTLESens (test1) - ExecGatttool_Run: call gatttool with command: gatttool -i hci0 -b 4C:65:A8:D2:64:7E --char-read -a 0x24 2>&1 /dev/null and loop 2
2018.12.23 12:17:31 5: XiaomiBTLESens (test1) - ExecGatttool_Run: gatttool loop result connect error,Invalid argument (22)

2018.12.23 12:17:31 5: XiaomiBTLESens (test1) - ExecGatttool_Run: call gatttool with command: gatttool -i hci0 -b 4C:65:A8:D2:64:7E --char-read -a 0x24 2>&1 /dev/null and loop 3
2018.12.23 12:17:31 5: XiaomiBTLESens (test1) - ExecGatttool_Run: gatttool loop result connect error,Invalid argument (22)

2018.12.23 12:17:31 5: XiaomiBTLESens (test1) - ExecGatttool_Run: call gatttool with command: gatttool -i hci0 -b 4C:65:A8:D2:64:7E --char-read -a 0x24 2>&1 /dev/null and loop 4
2018.12.23 12:17:31 5: XiaomiBTLESens (test1) - ExecGatttool_Run: gatttool loop result connect error,Invalid argument (22)

2018.12.23 12:17:31 4: XiaomiBTLESens (test1) - ExecGatttool_Run: gatttool result connect error,Invalid argument (22)

2018.12.23 12:17:31 5: XiaomiBTLESens (test1) - ExecGatttool_Done: gatttool return string: test1|4C:65:A8:D2:64:7E|error|read|0x24|{"gtResult":"Invalid argument (22)"}
2018.12.23 12:17:31 4: XiaomiBTLESens (test1) - ProcessingErrors
2018.12.23 12:17:31 4: XiaomiBTLESens (test1) - WriteReadings: Readings were written
hat jemand einen Tipp was ich anderst machen muss?
Habe noch eine BLE Gatewaylampe, diese habe ich ausgesteckt, hilft auch nichts

Offline Neuhier

  • Full Member
  • ***
  • Beiträge: 415
Antw:[74_XiaomiBTLESens.pm] Xiaomi Bluetooth Sensoren FlowerSens/Thermometer
« Antwort #640 am: 23 Dezember 2018, 12:30:21 »
Meine Xiaomi / Aqara Sensoren ( Luftdruck/ Temperatur/ Feuchtigkeit/ Bewegung) arbeiten per zigbee2mqtt, nicht per BT.

Offline stole

  • New Member
  • *
  • Beiträge: 10
Antw:[74_XiaomiBTLESens.pm] Xiaomi Bluetooth Sensoren FlowerSens/Thermometer
« Antwort #641 am: 23 Dezember 2018, 12:39:03 »
Meine Xiaomi / Aqara Sensoren ( Luftdruck/ Temperatur/ Feuchtigkeit/ Bewegung) arbeiten per zigbee2mqtt, nicht per BT.

Dann bist du hier glaube ich falsch gelandet.

Offline CoolTux

  • Developer
  • Hero Member
  • ****
  • Beiträge: 22929
Antw:[74_XiaomiBTLESens.pm] Xiaomi Bluetooth Sensoren FlowerSens/Thermometer
« Antwort #642 am: 23 Dezember 2018, 12:50:11 »
Die beiden Pflanzensensoren habe ich integriert, jedoch bei den Temperatur und Feuchtesensoren komme ich nicht weiter.
2018.12.23 12:17:18 3: XiaomiBTLESens (Floribunda) - defined with BTMAC C4:7C:8D:61:9C:D0
2018.12.23 12:17:18 3: XiaomiBTLESens (Beaucarnea) - defined with BTMAC C4:7C:8D:61:7C:FF
2018.12.23 12:17:18 3: XiaomiBTLESens (test1) - defined with BTMAC 4C:65:A8:D2:64:7E
2018.12.23 12:17:18 3: XiaomiBTLESens (test1) - set interval to 120
2018.12.23 12:17:18 3: XiaomiBTLESens (test2) - defined with BTMAC 4C:65:A8:D6:77:51
2018.12.23 12:17:18 3: XiaomiBTLESens (test3) - defined with BTMAC 4C:65:A8:D2:2C:0C
2018.12.23 12:17:18 3: XiaomiBTLESens (test4) - defined with BTMAC 4C:65:A8:DA:A1:86
2018.12.23 12:17:18 1: Including /opt/loxberry/data/plugins/fhem/fhem.save
2018.12.23 12:17:18 1: usb create starting
2018.12.23 12:17:18 3: Probing ZWDongle device /dev/serial1
2018.12.23 12:17:18 3: Probing CUL device /dev/ttyAMA0
2018.12.23 12:17:18 3: Probing TCM_ESP3 device /dev/ttyAMA0
2018.12.23 12:17:19 3: Probing ZWDongle device /dev/ttyAMA0
2018.12.23 12:17:19 3: Probing FRM device /dev/ttyAMA0
2018.12.23 12:17:24 1: usb create end
2018.12.23 12:17:24 4: XiaomiBTLESens (test1) - Run CreateParamGatttool with mod: read
2018.12.23 12:17:24 5: XiaomiBTLESens (test1) - Read XiaomiBTLESens_ExecGatttool_Run test1|4C:65:A8:D2:64:7E|read|0x24
2018.12.23 12:17:24 4: XiaomiBTLESens (test1) - stateRequestTimer: Call Request Timer
2018.12.23 12:17:24 0: Featurelevel: 5.9
2018.12.23 12:17:24 0: Server started with 15 defined entities (fhem.pl:18029/2018-12-22 perl:5.024001 os:linux user:loxberry pid:955)
2018.12.23 12:17:24 5: XiaomiBTLESens (test1) - ExecGatttool_Run: call gatttool with command: gatttool -i hci0 -b 4C:65:A8:D2:64:7E --char-read -a 0x24 2>&1 /dev/null and loop 0
2018.12.23 12:17:31 5: XiaomiBTLESens (test1) - ExecGatttool_Run: gatttool loop result connect error,Invalid argument (22)

2018.12.23 12:17:31 5: XiaomiBTLESens (test1) - ExecGatttool_Run: call gatttool with command: gatttool -i hci0 -b 4C:65:A8:D2:64:7E --char-read -a 0x24 2>&1 /dev/null and loop 1
2018.12.23 12:17:31 5: XiaomiBTLESens (test1) - ExecGatttool_Run: gatttool loop result connect error,Invalid argument (22)

2018.12.23 12:17:31 5: XiaomiBTLESens (test1) - ExecGatttool_Run: call gatttool with command: gatttool -i hci0 -b 4C:65:A8:D2:64:7E --char-read -a 0x24 2>&1 /dev/null and loop 2
2018.12.23 12:17:31 5: XiaomiBTLESens (test1) - ExecGatttool_Run: gatttool loop result connect error,Invalid argument (22)

2018.12.23 12:17:31 5: XiaomiBTLESens (test1) - ExecGatttool_Run: call gatttool with command: gatttool -i hci0 -b 4C:65:A8:D2:64:7E --char-read -a 0x24 2>&1 /dev/null and loop 3
2018.12.23 12:17:31 5: XiaomiBTLESens (test1) - ExecGatttool_Run: gatttool loop result connect error,Invalid argument (22)

2018.12.23 12:17:31 5: XiaomiBTLESens (test1) - ExecGatttool_Run: call gatttool with command: gatttool -i hci0 -b 4C:65:A8:D2:64:7E --char-read -a 0x24 2>&1 /dev/null and loop 4
2018.12.23 12:17:31 5: XiaomiBTLESens (test1) - ExecGatttool_Run: gatttool loop result connect error,Invalid argument (22)

2018.12.23 12:17:31 4: XiaomiBTLESens (test1) - ExecGatttool_Run: gatttool result connect error,Invalid argument (22)

2018.12.23 12:17:31 5: XiaomiBTLESens (test1) - ExecGatttool_Done: gatttool return string: test1|4C:65:A8:D2:64:7E|error|read|0x24|{"gtResult":"Invalid argument (22)"}
2018.12.23 12:17:31 4: XiaomiBTLESens (test1) - ProcessingErrors
2018.12.23 12:17:31 4: XiaomiBTLESens (test1) - WriteReadings: Readings were written
hat jemand einen Tipp was ich anderst machen muss?
Habe noch eine BLE Gatewaylampe, diese habe ich ausgesteckt, hilft auch nichts

Eventuell noch mit Herrn App oder so verbunden?
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://paypal.me/pools/c/8gULisr9BT
FHEM GitHub: https://github.com/fhem/
kein Support für cfg Editierer

Offline CoolTux

  • Developer
  • Hero Member
  • ****
  • Beiträge: 22929
Antw:[74_XiaomiBTLESens.pm] Xiaomi Bluetooth Sensoren FlowerSens/Thermometer
« Antwort #643 am: 23 Dezember 2018, 12:51:20 »
2018.12.23 06:53:41 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 32 20 48 3d 36 36 2e 35 00 "}
2018.12.23 06:53:41 4: XiaomiBTLESens (xSense1) - ProcessingNotification       
2018.12.23 06:53:41 4: XiaomiBTLESens (xSense1) - ProcessingNotification: handle
 0x10
2018.12.23 06:53:41 4: XiaomiBTLESens (xSense1) - Thermo/Hygro Sens Handle0x10 
2018.12.23 06:53:41 4: XiaomiBTLESens (xSense1) - WriteReadings: Readings were w
ritten
2018.12.23 06:56:11 4: XiaomiBTLESens (xSense1) - Run CreateParamGatttool with m
od: write
2018.12.23 06:56:11 5: XiaomiBTLESens (xSense1) - Write XiaomiBTLESens_ExecGattt
ool_Run xSense1|4C:65:A8:D5:E1:96|write|0x10|0100                               
2018.12.23 06:56:11 4: XiaomiBTLESens (xSense1) - stateRequestTimer: Call Reques
t Timer
2018.12.23 06:56:11 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: call gatttoo
l with command: timeout 10 gatttool -i hci0 -b 4C:65:A8:D5:E1:96 --char-write-re
q -a 0x10 -n 0100 --listen 2>&1 /dev/null and loop 0
2018.12.23 06:56:21 5: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool loo
p result Characteristic value was written successfully
2018.12.23 06:56:21 4: XiaomiBTLESens (xSense1) - ExecGatttool_Run: gatttool res
ult Characteristic value was written successfully
2018.12.23 06:56:21 5: XiaomiBTLESens (xSense1) - ExecGatttool_Done: gatttool re
turn string: xSense1|4C:65:A8:D5:E1:96|ok|write|0x10|{"gtResult":"54 3d 31 38 2e
 32 20 48 3d 36 36 2e 37 00 "}

Schaue ich mir die Tage einmal an.
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://paypal.me/pools/c/8gULisr9BT
FHEM GitHub: https://github.com/fhem/
kein Support für cfg Editierer

Offline stole

  • New Member
  • *
  • Beiträge: 10
Antw:[74_XiaomiBTLESens.pm] Xiaomi Bluetooth Sensoren FlowerSens/Thermometer
« Antwort #644 am: 23 Dezember 2018, 12:53:43 »
Schaue ich mir die Tage einmal an.

Danke dir.

 

decade-submarginal