[Solved] JeeLink LaCrosse problem

[alangward]

I apologise for posting this in English, but my German is very limited.
I hope someone will read this and help.

I have a setup that currently includes a JeeLink and a TFA Dostmann temperature sensor (model number 30.3159).
This has been working well for the last 6 months using a LaCrosse device set up .

I wanted to increase the range of weather data captured and so have acquired a WS-1600 weather station that uses a TX22 external transmitter. It is working fine - the weather station display showing the external temperature etc.

I am unable to pair the TX22 with my JeeLink.

I have autocreate enabled and have set JLink LaCrossePairForSec 3600 ignore_battery.

I have enabled 'verbose 5', for the JeeLink device and can see that it is receiving the data from the existing temperature sensor, but it appears to be receiving no data from the TX22.

What am I doing wrong? Are there any more diagnostics I can get?

Thanks
Alan

[sinus61]

Have you set your Jeelink to the different datarate of the WS1600? The WS1600 uses 8.842 kbps, so you have to use a toggle mode.

https://wiki.fhem.de/wiki/JeeLink#Toggle_und_Datenrate

[alangward]

Hi,
Thanks for your help.
I was unaware of the different data rates for the different devices.
I have now changed the rate (based on the link you sent me) and it is working fine.

Thanks again,
Alan