Autor Thema: Hank RGB Bulb HKZW-RGB01 in FHEM  (Gelesen 671 mal)

Offline db0b23b

  • New Member
  • *
  • Beiträge: 9
Hank RGB Bulb HKZW-RGB01 in FHEM
« am: 07 März 2018, 19:33:44 »
Hallo zusammen,

ich habe versucht, diese Lampe (Hank RGB Bulb HKZW-RGB01) in FHEM einzubinden.

modelId: 0208-0100-0004

FHEM findet keine XML-Config-Informationen für mein ZWave-Gerät.

Ich finde die folgende xml-Datei im Internet:

https://github.com/OpenZWave/open-zwave/blob/master/config/hank/hkzw-rgb01.xml

Ist es möglich, diese xml-Datei in die openzwave_deviceconfig.xml.gz aufzunehmen?

Vielen Dank

Offline krikan

  • Global Moderator
  • Hero Member
  • ****
  • Beiträge: 6337
Antw:Hank RGB Bulb HKZW-RGB01 in FHEM
« Antwort #1 am: 07 März 2018, 19:54:27 »
Werde ich in Kürze aufnehmen. Bitte noch ein paar Tage Geduld.

Gruß, Christian

Offline krikan

  • Global Moderator
  • Hero Member
  • ****
  • Beiträge: 6337
Antw:Hank RGB Bulb HKZW-RGB01 in FHEM
« Antwort #2 am: 11 März 2018, 21:26:56 »
Habe ein Komplettupdate der openzwave-config-Dateien eingecheckt.
Ab sofort im svn und morgen früh ab ca. 8 Uhr per update.

Offline vamsi

  • New Member
  • *
  • Beiträge: 4
Antw:Hank RGB Bulb HKZW-RGB01 in FHEM
« Antwort #3 am: 16 Mai 2019, 18:03:04 »
Team,

Please let me know i have 

1. Hank RGB Bulb
2. Sigma Designs UZB Z-Wave USB Stick (ZMEEUZB1)

I am able to connect Z-Wave USB Stick to FHEM Software this stick is blinking also.

But please let me know how to connect FHEM Software to Hank RGB Bulb

Its very urgent please help me.


Cheers,
Vamsi krishna

Offline krikan

  • Global Moderator
  • Hero Member
  • ****
  • Beiträge: 6337
Antw:Hank RGB Bulb HKZW-RGB01 in FHEM
« Antwort #4 am: 17 Mai 2019, 16:30:45 »
http://manuals-backend.z-wave.info/make.php?lang=en&sku=HNKERGB01 :

Zitat
Inclusion
To include RGB BULB into a Z-Wave network as a non-security device:
(1) Make sure the power supply is disconnected and the RGB BULB is located within a direct Z-Wave network"s main controller communication range.
(2) Set the Z-Wave network main controller into learning mode (see Z-Wave network controller operating manual).
(3) Insert the RGB BULB into a lamp-socket and then power on.
(4) Auto-inclusion will be activated. If the inclusion is successful, the RGB BULB will blink fast in blue for less than 5 seconds and then keep on for 3 seconds. RGB BULB will keep the same color as befor the inclusion.

(2) to set main controller into learning mode in FHEM:
set <ZWDongle> addNode on
« Letzte Änderung: 17 Mai 2019, 16:34:30 von krikan »

Offline vamsi

  • New Member
  • *
  • Beiträge: 4
Antw:Hank RGB Bulb HKZW-RGB01 in FHEM
« Antwort #5 am: 17 Mai 2019, 17:06:37 »
Hallo krikan,

First of all thanks for your reply.

for your reference i used below command:

1.) define ZWDongle_0 ZWDongle /dev/ttyACM0@115200
 
After that i did below process:
(1) Make sure the power supply is disconnected and the RGB BULB is located within a direct Z-Wave network"s main controller communication range.
(2) Set the Z-Wave network main controller into learning mode (set ZWDongle_0 addNode on)
(3) Insert the RGB BULB into a lamp-socket and then power on.
(4) Auto-inclusion will be activated. If the inclusion is successful, the RGB BULB will blink fast in blue for less than
5 seconds and then keep on for 3 seconds. RGB BULB will keep the same color as befor the inclusion.

After adding set ZWDongle_0 addNode on USB Stick light is blinking but Hank RGB Bulb not getting on .

Please give me your number i can explain you or you can help me here.

Cheers,
Vamsi krishna
« Letzte Änderung: 17 Mai 2019, 18:36:49 von vamsi »

 

decade-submarginal