SB_Player: Amplifier Definition schreibt log voll

Begonnen von laberlaib, 18 September 2018, 20:39:30

Vorheriges Thema - Nächstes Thema

laberlaib

Hallo,

ich habe einen SB_Player auf piCoreBasis: sb_Wohnzimmer
der hat einen Amplifier definiert: pm_Anlage_Sw - der Schaltkanal eines Homematic Leistungsmessers.
Verbunden sind die über "play"

defmod sb_Wohnzimmer SB_PLAYER b8:27:eb:ef:79:f2 ampl:pm_Anlage_Sw
[...]
attr sb_Wohnzimmer amplifier play
attr sb_Wohnzimmer amplifierDelayOff 10


im 5 Minuten Takt bekomme ich nun das Log vollgeschrieben (auch manchmal nach kürzerer Zeit):
2018.09.18 20:26:17 3: SB_PLAYER_Amplifier(sb_Wohnzimmer): with mode play and status:stopped
2018.09.18 20:26:17 3: SB_PLAYER_Amplifier(sb_Wohnzimmer): actual:off and set:off
2018.09.18 20:26:17 3: SB_PLAYER_Amplifier(sb_Wohnzimmer): no amplifier state change
2018.09.18 20:26:21 3: SB_PLAYER_Amplifier(sb_Wohnzimmer): with mode play and status:stopped
2018.09.18 20:26:21 3: SB_PLAYER_Amplifier(sb_Wohnzimmer): actual:off and set:off
2018.09.18 20:26:21 3: SB_PLAYER_Amplifier(sb_Wohnzimmer): no amplifier state change
2018.09.18 20:26:21 3: SB_PLAYER_Amplifier(sb_Wohnzimmer): with mode play and status:stopped
2018.09.18 20:26:21 3: SB_PLAYER_Amplifier(sb_Wohnzimmer): actual:off and set:off
2018.09.18 20:26:21 3: SB_PLAYER_Amplifier(sb_Wohnzimmer): no amplifier state change
2018.09.18 20:26:21 3: SB_PLAYER_Amplifier(sb_Wohnzimmer): with mode play and status:stopped
2018.09.18 20:26:21 3: SB_PLAYER_Amplifier(sb_Wohnzimmer): actual:off and set:off
2018.09.18 20:26:21 3: SB_PLAYER_Amplifier(sb_Wohnzimmer): no amplifier state change
2018.09.18 20:31:21 3: SB_PLAYER_Amplifier(sb_Wohnzimmer): with mode play and status:stopped
2018.09.18 20:31:21 3: SB_PLAYER_Amplifier(sb_Wohnzimmer): actual:off and set:off
2018.09.18 20:31:21 3: SB_PLAYER_Amplifier(sb_Wohnzimmer): no amplifier state change
2018.09.18 20:31:21 3: SB_PLAYER_Amplifier(sb_Wohnzimmer): with mode play and status:stopped
2018.09.18 20:31:21 3: SB_PLAYER_Amplifier(sb_Wohnzimmer): actual:off and set:off
2018.09.18 20:31:21 3: SB_PLAYER_Amplifier(sb_Wohnzimmer): no amplifier state change
2018.09.18 20:31:21 3: SB_PLAYER_Amplifier(sb_Wohnzimmer): with mode play and status:stopped
2018.09.18 20:31:21 3: SB_PLAYER_Amplifier(sb_Wohnzimmer): actual:off and set:off
2018.09.18 20:31:21 3: SB_PLAYER_Amplifier(sb_Wohnzimmer): no amplifier state change


Kann ich da was machen? oder einfach das Verboselevel runtersetzen?

List sb_Wohnzimmer (gekürzt wg der vielen Playlists)

Internals:
   AMPLIFIER  pm_Anlage_Sw
   ARTWORKURL plugins%2FTuneIn%2Fhtml%2Fimages%2Ficon.png
   CANPOWEROFF 1
   CFGFN     
   COVERARTLINK none
   COVERARTURL http://www.mysqueezebox.com/public/imageproxy?u=plugins%2FTuneIn%2Fhtml%2Fimages%2Ficon.png&h=50&w=50
   COVERID    -176883208
   DEF        b8:27:eb:ef:79:f2 ampl:pm_Anlage_Sw
   DISPLAYTYPE none
   FAVREF     
   FAVSELECT  Cadena_SER_-_Zaragoza
   FAVSET     favorites
   FAVSTR     radio_x_918_Alternative_Rock,Cadena_SER_-_Zaragoza,Bassdrive,Cadena_SER_-_ZaragozaCalatayud,SWR4_Baden-Wuertemberg,Reggae_Paradise_Radio
   FHEMUID    b827ebef79f2
   IODev      sb_Server_local
   ISREMOTESTREAM 1
   LASTALARM  1
   LASTANSWER mode stop
   LASTInputDev sb_Server_local
   MODEL      SqueezeLite
   MSGCNT     25617
   NAME       sb_Wohnzimmer
   NOTIFYDEV  global
   NR         23668
   NTFY_ORDER 50-SB_PLAYER_b827ebef79f2
   PLAYERIP   192.168.178.21:40566
   PLAYERMAC  b8:27:eb:ef:79:f2
   PLAYERNAME pcWohnzimmer
   SBSERVER   127.0.0.1:9000
STATE      on
   SYNCED     no
   SYNCGROUP  none
   SYNCGROUPPN none
   SYNCMASTER none
   SYNCMASTERPN none
   SYNCMASTERS Kodi(LibreELEC),Wohnzimmer
   SYNCVOLUME 0
   TYPE       SB_PLAYER
   WILLSLEEPIN ?
   sb_Server_local_MSGCNT 25617
   sb_Server_local_TIME 2018-09-18 20:26:21
[...]
   READINGS:
     2018-09-18 20:26:21   alarmsDefaultVolume 50
     2018-09-18 20:26:21   alarmsEnabled   on
     2018-09-18 20:26:21   alarmsFadeIn    on
     2018-09-18 20:26:21   alarmsFadeSeconds 1
     2018-09-18 20:26:21   alarmsSnooze    9
     2018-09-18 20:26:21   alarmsTimeout   60
     2018-09-18 20:26:21   connected       1
     2018-09-18 20:26:21   coverarturl     http://www.mysqueezebox.com/public/imageproxy?u=plugins%2FTuneIn%2Fhtml%2Fimages%2Ficon.png&h=50&w=50
     2018-09-18 20:26:21   currentAlbum   
     2018-09-18 20:26:21   currentArtist   
     2018-09-18 17:15:50   currentMedia    http://emisoras.cadenaser.com:8085/ejea
     2018-09-18 20:26:21   currentPlaylistName Cadena SER - Zaragoza
     2018-09-18 20:26:21   currentPlaylistUrl
     2018-09-18 20:26:21   currentTitle    Cadena SER - Zaragoza
     2018-09-18 20:26:21   currentTrackPosition 0
     2018-09-18 20:26:21   duration        0
     2018-09-18 20:26:21   favorites       Cadena_SER_-_Zaragoza
     2018-09-14 22:34:48   lastir          ?
     2018-09-18 17:46:37   lastunknowncmd  menustatus ARRAY(0xa82d4f8) add b8:27:eb:ef:79:f2
     2018-09-18 20:26:21   playStatus      stopped
     2018-09-18 20:26:21   playlistCurrentTrack 1
     2018-09-18 20:26:21   playlistTracks  1
     2018-09-18 20:26:21   playlists       Cadena_SER_-_Zaragoza
     2018-09-18 20:26:21   power           on
     2018-09-18 20:26:21   presence        present
     2018-09-18 20:26:21   repeat          off
     2018-09-18 20:26:21   shuffle         off
     2018-09-18 20:26:21   signalstrength  wired
     2018-09-18 20:26:21   state           on
     2018-09-18 20:26:21   synced          none
     2018-09-18 20:26:21   volume          55
     2018-09-18 20:26:21   volumeStraight  55
   helper:
     ALARMSCOUNT 0
     CoverOk    0
     amplifierDelayOffPause 0
     amplifierDelayOffPower 10
     amplifierDelayOffStop 10
     amplifierLastStatus stopped
     foundMyself 1
     lastGetStatus 1537295181.00564
     lastModeQuery 1537295181.02211
     lastTimeQuery 1537295181.01048
     lmsvolume  55
     noStopEventUntil 1537283751.64161
     path       http://opml.radiotime.com/Tune.ashx?id=s163367&formats=aac,ogg,mp3,wmpro,wma,wmvoice,hls,real&partnerId=16
     playerStatusOK 1
     playerStatusOKCounter 0
     playlistIds -176883208
     songinfocounter 0
     songinfopending 0
     songinfoquery
     ttsstate   0
     SB_PLAYER_Favs:
[...]
    elapsedTime:
       TS         1537295181.02484
       VAL        0
       count      0
       last       0
     ftuiSupport:
     myPlaylists:
     playlistUrls:
       -176883208 http://emisoras.cadenaser.com:8085/ejea
     text2speech:
     ttsOptions:
Attributes:
   IODev      sb_Server_local
   amplifier  play
   amplifierDelayOff 10
   coverartheight 50
   coverartwidth 50
   donotnotify true
   event-on-change-reading .*
   fadeinsecs 10
   room       SB_PLAYER
   ttslanguage de
   ttslink    http://translate.google.com/translate_tts?ie=UTF-8&tl=<LANG>&q=<TEXT>&client=tw-ob
   volumeLimit 100
   volumeStep 10


List  pm_Anlage_Sw

Internals:
   DEF        57F27101
   NAME       pm_Anlage_Sw
   NOTIFYDEV  global
   NR         86
   NTFY_ORDER 50-pm_Anlage_Sw
   STATE      off
   TYPE       CUL_HM
   chanNo     01
   device     pm_Anlage
   READINGS:
     2018-09-18 17:46:52   CommandAccepted yes
     2018-09-06 16:48:01   R-powerUpAction off
     2018-09-06 16:48:01   R-sign          off
     2018-09-06 16:48:07   RegL_01.        08:00 30:06 56:00 57:24 93:20 94:45 00:00
     2018-09-18 17:46:52   deviceMsg       off (to VCCU)
     2018-09-18 17:46:52   level           0
     2018-09-18 17:46:52   pct             0
     2018-09-18 17:46:52   recentStateType ack
     2018-09-18 17:46:52   state           off
     2018-09-18 17:46:52   timedOn         off
     2018-09-18 17:46:47   trigLast        fhem:02
   helper:
     dlvl       00
     dlvlCmd    ++A011F1234557F2710201000000
     regLst     ,1,3p
     expert:
       def        1
       det        0
       raw        1
       tpl        0
     role:
       chn        1
     tmpl:
Attributes:
   model      HM-ES-PMSw1-Pl-DN-R1
   peerIDs    00000000,
--
Proxmox, Homematic, G-Tags, Zigbee2MQTT, Rhasspy Sprachsteuerung im Aufbau (beta)

ChrisD

Hallo,

Setze verbose beim Player auf 2 (oder niedriger). Ab 3 werden Diagnosedaten für die Fehlersuche ausgegeben.

Grüße,

ChrisD