Autor Thema: Probleme mit der libraries  (Gelesen 161 mal)

Offline Markus

  • Sr. Member
  • ****
  • Beiträge: 839
  • No support over PM! Please use the thread ...
Probleme mit der libraries
« am: 14 Oktober 2018, 01:27:42 »
Ich google mir schon die finger wund Vielleicht kann mir jemand sagen warum dieses Programm nicht Funktioniert.
Fehlt mir eine libraries?
Ich hab schon die Arduino ide Deinstalliert alle Ordner gelöscht und neu Installiert ohne erfolg.
Was soll ich als nächstes Probieren?
Vielen dank Markus

#include <U8g2lib.h>
#include <Arduino.h>
#include <Wire.h>
#include <HX711.h>
#include <ESP32_Servo.h>

Servo myservo;
HX711 scale;
#include <Preferences.h>
Preferences preferences;


U8G2_SSD1306_128X64_NONAME_F_SW_I2C u8g2(U8G2_R0,SCL,SDA,U8X8_PIN_NONE);

const int POTI_PIN = 39;
const int SERVO_PIN = 4;
const int start_button = 13;
const int stop_button = 12;
const int betrieb_button = 14;
const int setup_button = 27;
const int HX711_DT = 17;                             
const int HX711_SCK = 16;

const char* gewicht_char = "";

int pos;
int gewicht;
int menu_kalib;
int menu_korrek;
int tara;
int tara_raw;
int gewicht_raw;
float faktor;
int faktor2;
int fmenge;
int korrektur;
int autostart;
int winkel;
int winkel_min=0;
int winkel_max=155;
int winkel_dosier_min=45;
float fein_dosier_gewicht=60;
int i;
int u;
int a;
int z;

void setup() {

pinMode(2, OUTPUT);
digitalWrite(2, HIGH);
 
  pinMode(start_button, INPUT);
  pinMode(stop_button, INPUT);
  pinMode(betrieb_button, INPUT);
  pinMode(setup_button, INPUT);
 
 Serial.begin(115200); while (!Serial) {  } 
 u8g2.begin();
 scale.begin(HX711_DT,HX711_SCK);
 scale.power_up();

 myservo.attach(SERVO_PIN, 750, 2500);

 
// EEPROM //
 
    preferences.begin("EEPROM", false);                                           //faktor und tara aus eeprom lesen
    faktor2 = preferences.getUInt("faktor2", 0);
//    if (faktor2 == 0) {Serial.println("Waage ist nicht kalibiert!"); for (int i=0; i < 200; i++) {delay(50); digitalWrite(LED, LOW); delay(50); digitalWrite(LED, HIGH);}}
    faktor = (faktor2 /10000.00);
    tara = preferences.getUInt("tara", 0);
    tara_raw = preferences.getUInt("tara_raw", 0);
    fmenge = preferences.getUInt("fmenge", 0);
    korrektur = preferences.getUInt("korrektur", 0);
    autostart = preferences.getUInt("autostart", 0);
    Serial.print("faktor = "); Serial.println(faktor);
    Serial.print("tara_raw = "); Serial.println(tara_raw);
    Serial.print("tara = "); Serial.println(tara);
    preferences.end();
}


void loop() {

  if ((digitalRead(setup_button))==HIGH){
  pos = (map(analogRead(POTI_PIN), 0,4095,1,5));
  u8g2.setFont(u8g2_font_courB10_tf);
  u8g2.clearBuffer();         
  u8g2.setCursor(10,8);
  u8g2.print("Tara");
  u8g2.setCursor(10,22);
  u8g2.print("Kalibrieren");
  u8g2.setCursor(10,36);
  u8g2.print("Korrektur");
  u8g2.setCursor(10,50);
  u8g2.print("Fuellmenge");
  u8g2.setCursor(10,64);
  u8g2.print("Autostart");
 
  // Tara //
  if (pos==1) {u8g2.setCursor(0,8); u8g2.print("*"); if ((digitalRead(start_button))==HIGH){
      tara=((int(scale.read_average(10))-tara_raw)/faktor);
      u8g2.setCursor(100,12); u8g2.print("OK"); u8g2.sendBuffer(); delay(2000);
      preferences.begin("EEPROM", false);                                                               
      preferences.putUInt("tara", tara);
      preferences.end();
      }}
 
  // Kalibrieren //
  if (pos==2) {u8g2.setCursor(0,22); u8g2.print("*"); if ((digitalRead(start_button))==HIGH){i=1; delay(300);
    u8g2.setFont(u8g2_font_courB14_tf);
    u8g2.clearBuffer();
    u8g2.setCursor(10,12); u8g2.print("Bitte 500g"); u8g2.setCursor(10,28); u8g2.print("aufstellen");u8g2.setCursor(10,44); u8g2.print("& mit Start");u8g2.setCursor(10,60); u8g2.print("bestaetigen"); u8g2.sendBuffer(); 
    while(i>0){
      if ((digitalRead(start_button))==HIGH){gewicht_raw=(int(scale.read_average(10))); delay(2000); i=0;}
      }
        i=1;
        u8g2.clearBuffer();
        u8g2.setCursor(10,12); u8g2.print("Bitte Waage"); u8g2.setCursor(10,28); u8g2.print("leeren");u8g2.setCursor(10,44); u8g2.print("& mit Start");u8g2.setCursor(10,60); u8g2.print("bestaetigen"); u8g2.sendBuffer(); 
        while(i>0){
        if ((digitalRead(start_button))==HIGH){tara_raw=(int(scale.read_average(10)));delay(2000); i=0;
        faktor=((gewicht_raw-tara_raw)/500.000);
       
        preferences.begin("EEPROM", false);                                                                 //faktor und tara ins eeprom schreiben
        preferences.putUInt("faktor2", (faktor*10000));
        preferences.putUInt("tara_raw", tara_raw);
        preferences.end(); 
       }
      }
    }
    }
 
 
  // Korrektur //
  if (pos==3) {u8g2.setCursor(0,36); u8g2.print("*");
   if ((digitalRead(start_button))==HIGH){i=1; delay(300);
      u8g2.setFont(u8g2_font_courB14_tf);
      u8g2.clearBuffer();   
      while(i>0){
      pos = (map(analogRead(POTI_PIN), 0,4095,-50,10));
      u8g2.setFont(u8g2_font_courB14_tf);
      u8g2.clearBuffer();         
      u8g2.setCursor(10,12); u8g2.print("Korrektur"); u8g2.setCursor(40,28); u8g2.print(pos);u8g2.sendBuffer();
      if ((digitalRead(start_button))==HIGH){korrektur=pos ; u8g2.setCursor(100,28); u8g2.print("OK"); u8g2.sendBuffer(); delay(2000); i=0;}
      preferences.begin("EEPROM", false);                                                               
      preferences.putUInt("korrektur", korrektur);
      preferences.end(); 
      }
  }
  }
 
  // Füllmenge //
  if (pos==4) {u8g2.setCursor(0,50); u8g2.print("*"); if ((digitalRead(start_button))==HIGH){i=1; delay(200);
      u8g2.setFont(u8g2_font_courB14_tf);
      u8g2.clearBuffer();   
      while(i>0){
      pos = (map(analogRead(POTI_PIN), 0,4095,1,4));
      u8g2.setFont(u8g2_font_courB14_tf);
      u8g2.clearBuffer();         
      u8g2.setCursor(10,12); u8g2.print(" 500g"); u8g2.setCursor(10,28); u8g2.print(" 250g"); u8g2.setCursor(10,44); u8g2.print("  50g"); u8g2.setCursor(10,60); u8g2.print("  20g"); u8g2.sendBuffer();
      if (pos==1) {u8g2.setCursor(0,12); u8g2.print("*"); u8g2.sendBuffer(); if ((digitalRead(start_button))==HIGH){fmenge=500 ; u8g2.setCursor(100,12); u8g2.print("OK"); u8g2.sendBuffer(); delay(2000); i=0; preferences.begin("EEPROM", false); preferences.putUInt("fmenge", fmenge); preferences.end(); }}
      if (pos==2) {u8g2.setCursor(0,28); u8g2.print("*"); u8g2.sendBuffer(); if ((digitalRead(start_button))==HIGH){fmenge=250 ; u8g2.setCursor(100,28); u8g2.print("OK"); u8g2.sendBuffer(); delay(2000); i=0; preferences.begin("EEPROM", false); preferences.putUInt("fmenge", fmenge); preferences.end(); }}
      if (pos==3) {u8g2.setCursor(0,44); u8g2.print("*"); u8g2.sendBuffer(); if ((digitalRead(start_button))==HIGH){fmenge=50 ; u8g2.setCursor(100,44); u8g2.print("OK"); u8g2.sendBuffer(); delay(2000); i=0; preferences.begin("EEPROM", false); preferences.putUInt("fmenge", fmenge); preferences.end(); }}
      if (pos==4) {u8g2.setCursor(0,60); u8g2.print("*"); u8g2.sendBuffer(); if ((digitalRead(start_button))==HIGH){fmenge=20 ; u8g2.setCursor(100,60); u8g2.print("OK"); u8g2.sendBuffer(); delay(2000); i=0; preferences.begin("EEPROM", false); preferences.putUInt("fmenge", fmenge); preferences.end(); }}
        }
        }
}

// Autostart //
if (pos==5) {u8g2.setCursor(0,64); u8g2.print("*"); if ((digitalRead(start_button))==HIGH){i=1; delay(200);
      u8g2.setFont(u8g2_font_courB14_tf);
      u8g2.clearBuffer();   
      while(i>0){
      pos = (map(analogRead(POTI_PIN), 0,4095,1,2));
      u8g2.setFont(u8g2_font_courB14_tf);
      u8g2.clearBuffer();         
      u8g2.setCursor(10,12); u8g2.print("Auto EIN"); u8g2.setCursor(10,28); u8g2.print("Auto AUS"); u8g2.sendBuffer();
      if (pos==1) {u8g2.setCursor(0,12); u8g2.print("*"); u8g2.sendBuffer(); if ((digitalRead(start_button))==HIGH){autostart=1 ; u8g2.setCursor(105,12); u8g2.print("OK"); u8g2.sendBuffer(); delay(2000); i=0; preferences.begin("EEPROM", false); preferences.putUInt("autostart", autostart); preferences.end(); }}
      if (pos==2) {u8g2.setCursor(0,28); u8g2.print("*"); u8g2.sendBuffer(); if ((digitalRead(start_button))==HIGH){autostart=2 ; u8g2.setCursor(105,28); u8g2.print("OK"); u8g2.sendBuffer(); delay(2000); i=0; preferences.begin("EEPROM", false); preferences.putUInt("autostart", autostart); preferences.end(); }}
      }
}
}


  u8g2.sendBuffer();   
  a=0;     
  }
 
  // Betrieb //
 
  if ((digitalRead(betrieb_button))==HIGH){
  pos = (map(analogRead(POTI_PIN), 0,4095,0,100));
  gewicht=((((int(scale.read()))-tara_raw)/faktor)-tara);
  if ((autostart==1)&&(gewicht<=5)&&(gewicht>=-5)&&(a==0)){delay(1000); if((gewicht<=5)&&(gewicht>=-5)){u8g2.clearBuffer(); u8g2.setFont(u8g2_font_courB24_tf); u8g2.setCursor(20,43); u8g2.print("START"); u8g2.sendBuffer(); delay(3000); a=1;}}
  if ((autostart==1)&&(gewicht<-20)){winkel=winkel_min; a=0;}
  if ((digitalRead(start_button))==HIGH){a=1;}
  if ((digitalRead(stop_button))==HIGH){(winkel=winkel_min); a=0;}
  if (a==1){winkel=((winkel_max*pos)/100);}
  if ((a==1)&&(fmenge+korrektur-gewicht<=fein_dosier_gewicht)){winkel=((((winkel_max*pos)/100)*((fmenge+korrektur-gewicht)/fein_dosier_gewicht)));}
  if ((a==1)&&(winkel<=winkel_dosier_min)){winkel=winkel_dosier_min;}
  if ((a==1)&&((gewicht-korrektur)>=fmenge)){winkel=winkel_min; a=0;}
  if ((digitalRead(stop_button))==HIGH){(winkel=winkel_min); a=0;}
  myservo.write(winkel);
  float y = ((fmenge+korrektur-gewicht)/fein_dosier_gewicht);
  Serial.println(y);
//  Serial.print(scale.read_average(3));Serial.print(" Tara_raw:"); Serial.print(tara_raw);Serial.print(" Faktor "); Serial.print(faktor); ;Serial.print(" Gewicht "); Serial.println(gewicht);
  u8g2.clearBuffer();         
  u8g2.setFont(u8g2_font_courB24_tf);
  if (gewicht<100) {u8g2.setCursor(55,43);} if (gewicht<10) {u8g2.setCursor(75,43);} if (gewicht>=100) {u8g2.setCursor(35,43);} if (gewicht>=1000) {u8g2.setCursor(15,43);} if (gewicht<0) {u8g2.setCursor(55,43);} if (gewicht<=-10) {u8g2.setCursor(35,43);} if (gewicht<=-100) {u8g2.setCursor(15,43);} u8g2.print(gewicht); u8g2.setCursor(95,43); u8g2.print("g");
  u8g2.setFont(u8g2_font_courB14_tf);
//  u8g2.setCursor(0,13); u8g2.print("t="); u8g2.setCursor(24,13); u8g2.print(tara);
  u8g2.setCursor(0,13); u8g2.print("W="); u8g2.setCursor(24,13); u8g2.print(winkel);
  if (autostart==1){u8g2.setCursor(58,13); u8g2.print("AS");}
  u8g2.setCursor(0,64); u8g2.print("k="); u8g2.setCursor(24,64); u8g2.print(korrektur);
  u8g2.setCursor(73,64); u8g2.print("f="); u8g2.setCursor(97,64); u8g2.print(fmenge);
  if (pos<100) {u8g2.setCursor(98,13);} if (pos<10) {u8g2.setCursor(108,13);} if (pos>=100) {u8g2.setCursor(88,13);} u8g2.print(pos); u8g2.setCursor(120,13); u8g2.print(char(37));
  u8g2.sendBuffer();
  }


  // Handbetrieb //
  if ((digitalRead(betrieb_button)==LOW) && (digitalRead(setup_button)==LOW)){
  pos = (map(analogRead(POTI_PIN), 0,4095,0,100));
  gewicht=((((int(scale.read()))-tara_raw)/faktor)-tara);
  if ((digitalRead(start_button))==HIGH){a=1;}
  if ((digitalRead(stop_button))==HIGH){(winkel=winkel_min); a=0;}
  if ((digitalRead(stop_button))==HIGH){(winkel=winkel_min);}
  if (a==1){winkel=((winkel_max*pos)/100);}
  myservo.write(winkel);
//  Serial.print(scale.read_average(3));Serial.print(" Tara_raw:"); Serial.print(tara_raw);Serial.print(" Faktor "); Serial.print(faktor); ;Serial.print(" Gewicht "); Serial.println(gewicht);
  u8g2.clearBuffer();         
  u8g2.setFont(u8g2_font_courB24_tf);
  if (gewicht<100) {u8g2.setCursor(55,43);} if (gewicht<10) {u8g2.setCursor(75,43);} if (gewicht>=100) {u8g2.setCursor(35,43);} if (gewicht>=1000) {u8g2.setCursor(15,43);} if (gewicht<0) {u8g2.setCursor(55,43);} if (gewicht<=-10) {u8g2.setCursor(35,43);} if (gewicht<=-100) {u8g2.setCursor(15,43);} u8g2.print(gewicht); u8g2.setCursor(95,43); u8g2.print("g");
  u8g2.setFont(u8g2_font_courB14_tf);
  u8g2.setCursor(0,13); u8g2.print("W="); u8g2.setCursor(24,13); u8g2.print(winkel);
  if (pos<100) {u8g2.setCursor(98,13);} if (pos<10) {u8g2.setCursor(108,13);} if (pos>=100) {u8g2.setCursor(88,13);} u8g2.print(pos); u8g2.setCursor(120,13); u8g2.print(char(37));
  u8g2.sendBuffer();
  //a=0;
  }
}

Arduino: 1.8.7 (Windows 8.1), Board: "ESP32 Dev Module, Disabled, Default, QIO, 80MHz, 4MB (32Mb), 115200, None"

sketch\Abfuellwaage.ino.cpp.o:(.literal._Z4loopv+0xb0): undefined reference to `delay'

sketch\Abfuellwaage.ino.cpp.o: In function `loop()':

C:\Users\ml\Documents\Arduino\arduino-1.5\sketches\Abfuelwage\Abfuellwaage/Abfuellwaage.ino:107: undefined reference to `delay'

C:\Users\ml\Documents\Arduino\arduino-1.5\sketches\Abfuelwage\Abfuellwaage/Abfuellwaage.ino:110: undefined reference to `delay'

C:\Users\ml\Documents\Arduino\arduino-1.5\sketches\Abfuelwage\Abfuellwaage/Abfuellwaage.ino:118: undefined reference to `delay'

C:\Users\ml\Documents\Arduino\arduino-1.5\sketches\Abfuelwage\Abfuellwaage/Abfuellwaage.ino:124: undefined reference to `delay'

sketch\Abfuellwaage.ino.cpp.o:C:\Users\ml\Documents\Arduino\arduino-1.5\sketches\Abfuelwage\Abfuellwaage/Abfuellwaage.ino:127: more undefined references to `delay' follow

C:\Users\ml\AppData\Local\Temp\arduino_build_149019/arduino.ar(main.cpp.o):(.literal.app_main+0x8): undefined reference to `initArduino'

C:\Users\ml\AppData\Local\Temp\arduino_build_149019/arduino.ar(main.cpp.o): In function `loopTask(void*)':

C:\Users\ml\AppData\Local\Arduino15\packages\esp32\hardware\esp32\1.0.0\cores\esp32/main.cpp:17: undefined reference to `initArduino'

libraries\U8g2\U8x8lib.cpp.o:(.literal.u8x8_gpio_and_delay_arduino+0x0): undefined reference to `delayMicroseconds'

libraries\U8g2\U8x8lib.cpp.o: In function `u8x8_gpio_and_delay_arduino':

C:\Users\ml\Documents\Arduino\libraries\U8g2\src/U8x8lib.cpp:1381: undefined reference to `delayMicroseconds'

C:\Users\ml\Documents\Arduino\libraries\U8g2\src/U8x8lib.cpp:1381: undefined reference to `delay'

C:\Users\ml\Documents\Arduino\libraries\U8g2\src/U8x8lib.cpp:1381: undefined reference to `delayMicroseconds'

collect2.exe: error: ld returned 1 exit status

exit status 1
Fehler beim Kompilieren für das Board ESP32 Dev Module.

Dieser Bericht wäre detaillierter, wenn die Option
"Ausführliche Ausgabe während der Kompilierung"
in Datei -> Voreinstellungen aktiviert wäre.

[code]Arduino: 1.8.7 (Windows 8.1), Board: "ESP32 Dev Module, Disabled, Default, QIO, 80MHz, 4MB (32Mb), 115200, None"

C:\Program Files (x86)\Arduino\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\ml\AppData\Local\Arduino15\packages -hardware C:\Users\ml\Documents\Arduino\hardware -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\ml\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\ml\Documents\Arduino\libraries -fqbn=esp32:esp32:esp32:PSRAM=disabled,PartitionScheme=default,FlashMode=qio,FlashFreq=80,FlashSize=4M,UploadSpeed=115200,DebugLevel=none -ide-version=10807 -build-path C:\Users\ml\AppData\Local\Temp\arduino_build_149019 -warnings=default -build-cache C:\Users\ml\AppData\Local\Temp\arduino_cache_210052 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.mkspiffs.path=C:\Users\ml\AppData\Local\Arduino15\packages\esp32\tools\mkspiffs\0.2.3 -prefs=runtime.tools.mkspiffs-0.2.3.path=C:\Users\ml\AppData\Local\Arduino15\packages\esp32\tools\mkspiffs\0.2.3 -prefs=runtime.tools.esptool.path=C:\Users\ml\AppData\Local\Arduino15\packages\esp32\tools\esptool\2.3.1 -prefs=runtime.tools.esptool-2.3.1.path=C:\Users\ml\AppData\Local\Arduino15\packages\esp32\tools\esptool\2.3.1 -prefs=runtime.tools.xtensa-esp32-elf-gcc.path=C:\Users\ml\AppData\Local\Arduino15\packages\esp32\tools\xtensa-esp32-elf-gcc\1.22.0-80-g6c4433a-5.2.0 -prefs=runtime.tools.xtensa-esp32-elf-gcc-1.22.0-80-g6c4433a-5.2.0.path=C:\Users\ml\AppData\Local\Arduino15\packages\esp32\tools\xtensa-esp32-elf-gcc\1.22.0-80-g6c4433a-5.2.0 -verbose C:\Users\ml\Documents\Arduino\arduino-1.5\sketches\Abfuelwage\Abfuellwaage\Abfuellwaage.ino
C:\Program Files (x86)\Arduino\arduino-builder -compile -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\ml\AppData\Local\Arduino15\packages -hardware C:\Users\ml\Documents\Arduino\hardware -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\ml\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\ml\Documents\Arduino\libraries -fqbn=esp32:esp32:esp32:PSRAM=disabled,PartitionScheme=default,FlashMode=qio,FlashFreq=80,FlashSize=4M,UploadSpeed=115200,DebugLevel=none -ide-version=10807 -build-path C:\Users\ml\AppData\Local\Temp\arduino_build_149019 -warnings=default -build-cache C:\Users\ml\AppData\Local\Temp\arduino_cache_210052 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.mkspiffs.path=C:\Users\ml\AppData\Local\Arduino15\packages\esp32\tools\mkspiffs\0.2.3 -prefs=runtime.tools.mkspiffs-0.2.3.path=C:\Users\ml\AppData\Local\Arduino15\packages\esp32\tools\mkspiffs\0.2.3 -prefs=runtime.tools.esptool.path=C:\Users\ml\AppData\Local\Arduino15\packages\esp32\tools\esptool\2.3.1 -prefs=runtime.tools.esptool-2.3.1.path=C:\Users\ml\AppData\Local\Arduino15\packages\esp32\tools\esptool\2.3.1 -prefs=runtime.tools.xtensa-esp32-elf-gcc.path=C:\Users\ml\AppData\Local\Arduino15\packages\esp32\tools\xtensa-esp32-elf-gcc\1.22.0-80-g6c4433a-5.2.0 -prefs=runtime.tools.xtensa-esp32-elf-gcc-1.22.0-80-g6c4433a-5.2.0.path=C:\Users\ml\AppData\Local\Arduino15\packages\esp32\tools\xtensa-esp32-elf-gcc\1.22.0-80-g6c4433a-5.2.0 -verbose C:\Users\ml\Documents\Arduino\arduino-1.5\sketches\Abfuelwage\Abfuellwaage\Abfuellwaage.ino
Using board 'esp32' from platform in folder: C:\Users\ml\AppData\Local\Arduino15\packages\esp32\hardware\esp32\1.0.0
Using core 'esp32' from platform in folder: C:\Users\ml\AppData\Local\Arduino15\packages\esp32\hardware\esp32\1.0.0
Detecting libraries used...
"C:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\tools\\xtensa-esp32-elf-gcc\\1.22.0-80-g6c4433a-5.2.0/bin/xtensa-esp32-elf-g++" -DESP_PLATFORM "-DMBEDTLS_CONFIG_FILE=\"mbedtls/esp_config.h\"" -DHAVE_CONFIG_H "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/config" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/bluedroid" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/bluedroid/api" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/app_trace" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/app_update" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/bootloader_support" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/bt" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/driver" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/esp32" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/esp_adc_cal" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/esp_http_client" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/esp-tls" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/ethernet" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/fatfs" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/freertos" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/heap" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/jsmn" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/log" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/mdns" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/mbedtls" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/mbedtls_port" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/newlib" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/nvs_flash" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/openssl" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/spi_flash" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/sdmmc" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/smartconfig_ack" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/spiffs" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/tcpip_adapter" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/ulp" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/vfs" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/wear_levelling" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/xtensa-debug-module" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/coap" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/console" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/expat" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/json" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/lwip" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/newlib" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/nghttp" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/soc" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/wpa_supplicant" -std=gnu++11 -fno-exceptions -Os -g3 -Wpointer-arith -fexceptions -fstack-protector -ffunction-sections -fdata-sections -fstrict-volatile-bitfields -mlongcalls -nostdlib -w -Wno-error=unused-function -Wno-error=unused-but-set-variable -Wno-error=unused-variable -Wno-error=deprecated-declarations -Wno-unused-parameter -Wno-sign-compare -fno-rtti -c -w -x c++ -E -CC -DF_CPU=240000000L -DARDUINO=10807 -DARDUINO_ESP32_DEV -DARDUINO_ARCH_ESP32 "-DARDUINO_BOARD=\"ESP32_DEV\"" "-DARDUINO_VARIANT=\"esp32\"" -DESP32 -DCORE_DEBUG_LEVEL=0 "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0\\cores\\esp32" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0\\variants\\esp32" "C:\\Users\\ml\\AppData\\Local\\Temp\\arduino_build_149019\\sketch\\Abfuellwaage.ino.cpp" -o nul
"C:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\tools\\xtensa-esp32-elf-gcc\\1.22.0-80-g6c4433a-5.2.0/bin/xtensa-esp32-elf-g++" -DESP_PLATFORM "-DMBEDTLS_CONFIG_FILE=\"mbedtls/esp_config.h\"" -DHAVE_CONFIG_H "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/config" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/bluedroid" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/bluedroid/api" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/app_trace" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/app_update" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/bootloader_support" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/bt" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/driver" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/esp32" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/esp_adc_cal" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/esp_http_client" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/esp-tls" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/ethernet" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/fatfs" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/freertos" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/heap" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/jsmn" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/log" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/mdns" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/mbedtls" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/mbedtls_port" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/newlib" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/nvs_flash" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/openssl" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/spi_flash" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/sdmmc" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/smartconfig_ack" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/spiffs" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/tcpip_adapter" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/ulp" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/vfs" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/wear_levelling" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/xtensa-debug-module" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/coap" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/console" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/expat" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/json" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/lwip" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/newlib" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/nghttp" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/soc" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/wpa_supplicant" -std=gnu++11 -fno-exceptions -Os -g3 -Wpointer-arith -fexceptions -fstack-protector -ffunction-sections -fdata-sections -fstrict-volatile-bitfields -mlongcalls -nostdlib -w -Wno-error=unused-function -Wno-error=unused-but-set-variable -Wno-error=unused-variable -Wno-error=deprecated-declarations -Wno-unused-parameter -Wno-sign-compare -fno-rtti -c -w -x c++ -E -CC -DF_CPU=240000000L -DARDUINO=10807 -DARDUINO_ESP32_DEV -DARDUINO_ARCH_ESP32 "-DARDUINO_BOARD=\"ESP32_DEV\"" "-DARDUINO_VARIANT=\"esp32\"" -DESP32 -DCORE_DEBUG_LEVEL=0 "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0\\cores\\esp32" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0\\variants\\esp32" "-IC:\\Users\\ml\\Documents\\Arduino\\libraries\\U8g2\\src" "C:\\Users\\ml\\AppData\\Local\\Temp\\arduino_build_149019\\sketch\\Abfuellwaage.ino.cpp" -o nul
"C:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\tools\\xtensa-esp32-elf-gcc\\1.22.0-80-g6c4433a-5.2.0/bin/xtensa-esp32-elf-g++" -DESP_PLATFORM "-DMBEDTLS_CONFIG_FILE=\"mbedtls/esp_config.h\"" -DHAVE_CONFIG_H "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/config" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/bluedroid" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/bluedroid/api" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/app_trace" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/app_update" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/bootloader_support" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/bt" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/driver" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/esp32" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/esp_adc_cal" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/esp_http_client" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/esp-tls" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/ethernet" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/fatfs" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/freertos" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/heap" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/jsmn" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/log" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/mdns" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/mbedtls" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/mbedtls_port" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/newlib" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/nvs_flash" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/openssl" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/spi_flash" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/sdmmc" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/smartconfig_ack" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/spiffs" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/tcpip_adapter" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/ulp" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/vfs" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/wear_levelling" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/xtensa-debug-module" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/coap" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/console" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/expat" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/json" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/lwip" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/newlib" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/nghttp" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/soc" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/wpa_supplicant" -std=gnu++11 -fno-exceptions -Os -g3 -Wpointer-arith -fexceptions -fstack-protector -ffunction-sections -fdata-sections -fstrict-volatile-bitfields -mlongcalls -nostdlib -w -Wno-error=unused-function -Wno-error=unused-but-set-variable -Wno-error=unused-variable -Wno-error=deprecated-declarations -Wno-unused-parameter -Wno-sign-compare -fno-rtti -c -w -x c++ -E -CC -DF_CPU=240000000L -DARDUINO=10807 -DARDUINO_ESP32_DEV -DARDUINO_ARCH_ESP32 "-DARDUINO_BOARD=\"ESP32_DEV\"" "-DARDUINO_VARIANT=\"esp32\"" -DESP32 -DCORE_DEBUG_LEVEL=0 "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0\\cores\\esp32" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0\\variants\\esp32" "-IC:\\Users\\ml\\Documents\\Arduino\\libraries\\U8g2\\src" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0\\libraries\\Wire\\src" "C:\\Users\\ml\\AppData\\Local\\Temp\\arduino_build_149019\\sketch\\Abfuellwaage.ino.cpp" -o nul
"C:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\tools\\xtensa-esp32-elf-gcc\\1.22.0-80-g6c4433a-5.2.0/bin/xtensa-esp32-elf-g++" -DESP_PLATFORM "-DMBEDTLS_CONFIG_FILE=\"mbedtls/esp_config.h\"" -DHAVE_CONFIG_H "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/config" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/bluedroid" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/bluedroid/api" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/app_trace" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/app_update" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/bootloader_support" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/bt" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/driver" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/esp32" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/esp_adc_cal" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/esp_http_client" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/esp-tls" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/ethernet" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/fatfs" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/freertos" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/heap" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/jsmn" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/log" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/mdns" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/mbedtls" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/mbedtls_port" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/newlib" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/nvs_flash" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/openssl" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/spi_flash" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/sdmmc" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/smartconfig_ack" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/spiffs" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/tcpip_adapter" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/ulp" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/vfs" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/wear_levelling" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/xtensa-debug-module" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/coap" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/console" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/expat" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/json" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/lwip" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/newlib" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/nghttp" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/soc" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/wpa_supplicant" -std=gnu++11 -fno-exceptions -Os -g3 -Wpointer-arith -fexceptions -fstack-protector -ffunction-sections -fdata-sections -fstrict-volatile-bitfields -mlongcalls -nostdlib -w -Wno-error=unused-function -Wno-error=unused-but-set-variable -Wno-error=unused-variable -Wno-error=deprecated-declarations -Wno-unused-parameter -Wno-sign-compare -fno-rtti -c -w -x c++ -E -CC -DF_CPU=240000000L -DARDUINO=10807 -DARDUINO_ESP32_DEV -DARDUINO_ARCH_ESP32 "-DARDUINO_BOARD=\"ESP32_DEV\"" "-DARDUINO_VARIANT=\"esp32\"" -DESP32 -DCORE_DEBUG_LEVEL=0 "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0\\cores\\esp32" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0\\variants\\esp32" "-IC:\\Users\\ml\\Documents\\Arduino\\libraries\\U8g2\\src" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0\\libraries\\Wire\\src" "-IC:\\Users\\ml\\Documents\\Arduino\\libraries\\HX711-master" "C:\\Users\\ml\\AppData\\Local\\Temp\\arduino_build_149019\\sketch\\Abfuellwaage.ino.cpp" -o nul
"C:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\tools\\xtensa-esp32-elf-gcc\\1.22.0-80-g6c4433a-5.2.0/bin/xtensa-esp32-elf-g++" -DESP_PLATFORM "-DMBEDTLS_CONFIG_FILE=\"mbedtls/esp_config.h\"" -DHAVE_CONFIG_H "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/config" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/bluedroid" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/bluedroid/api" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/app_trace" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/app_update" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/bootloader_support" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/bt" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/driver" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/esp32" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/esp_adc_cal" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/esp_http_client" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/esp-tls" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/ethernet" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/fatfs" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/freertos" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/heap" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/jsmn" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/log" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/mdns" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/mbedtls" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/mbedtls_port" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/newlib" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/nvs_flash" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/openssl" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/spi_flash" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/sdmmc" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/smartconfig_ack" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/spiffs" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/tcpip_adapter" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/ulp" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/vfs" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/wear_levelling" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/xtensa-debug-module" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/coap" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/console" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/expat" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/json" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/lwip" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/newlib" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/nghttp" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/soc" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/wpa_supplicant" -std=gnu++11 -fno-exceptions -Os -g3 -Wpointer-arith -fexceptions -fstack-protector -ffunction-sections -fdata-sections -fstrict-volatile-bitfields -mlongcalls -nostdlib -w -Wno-error=unused-function -Wno-error=unused-but-set-variable -Wno-error=unused-variable -Wno-error=deprecated-declarations -Wno-unused-parameter -Wno-sign-compare -fno-rtti -c -w -x c++ -E -CC -DF_CPU=240000000L -DARDUINO=10807 -DARDUINO_ESP32_DEV -DARDUINO_ARCH_ESP32 "-DARDUINO_BOARD=\"ESP32_DEV\"" "-DARDUINO_VARIANT=\"esp32\"" -DESP32 -DCORE_DEBUG_LEVEL=0 "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0\\cores\\esp32" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0\\variants\\esp32" "-IC:\\Users\\ml\\Documents\\Arduino\\libraries\\U8g2\\src" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0\\libraries\\Wire\\src" "-IC:\\Users\\ml\\Documents\\Arduino\\libraries\\HX711-master" "-IC:\\Users\\ml\\Documents\\Arduino\\libraries\\ESP32Servo-master\\src" "C:\\Users\\ml\\AppData\\Local\\Temp\\arduino_build_149019\\sketch\\Abfuellwaage.ino.cpp" -o nul
"C:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\tools\\xtensa-esp32-elf-gcc\\1.22.0-80-g6c4433a-5.2.0/bin/xtensa-esp32-elf-g++" -DESP_PLATFORM "-DMBEDTLS_CONFIG_FILE=\"mbedtls/esp_config.h\"" -DHAVE_CONFIG_H "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/config" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/bluedroid" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/bluedroid/api" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/app_trace" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/app_update" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/bootloader_support" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/bt" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/driver" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/esp32" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/esp_adc_cal" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/esp_http_client" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/esp-tls" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/ethernet" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/fatfs" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/freertos" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/heap" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/jsmn" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/log" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/mdns" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/mbedtls" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/mbedtls_port" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/newlib" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/nvs_flash" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/openssl" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/spi_flash" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/sdmmc" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/smartconfig_ack" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/spiffs" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/tcpip_adapter" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/ulp" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/vfs" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/wear_levelling" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/xtensa-debug-module" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/coap" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/console" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/expat" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/json" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/lwip" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/newlib" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/nghttp" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/soc" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0/tools/sdk/include/wpa_supplicant" -std=gnu++11 -fno-exceptions -Os -g3 -Wpointer-arith -fexceptions -fstack-protector -ffunction-sections -fdata-sections -fstrict-volatile-bitfields -mlongcalls -nostdlib -w -Wno-error=unused-function -Wno-error=unused-but-set-variable -Wno-error=unused-variable -Wno-error=deprecated-declarations -Wno-unused-parameter -Wno-sign-compare -fno-rtti -c -w -x c++ -E -CC -DF_CPU=240000000L -DARDUINO=10807 -DARDUINO_ESP32_DEV -DARDUINO_ARCH_ESP32 "-DARDUINO_BOARD=\"ESP32_DEV\"" "-DARDUINO_VARIANT=\"esp32\"" -DESP32 -DCORE_DEBUG_LEVEL=0 "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0\\cores\\esp32" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0\\variants\\esp32" "-IC:\\Users\\ml\\Documents\\Arduino\\libraries\\U8g2\\src" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0\\libraries\\Wire\\src" "-IC:\\Users\\ml\\Documents\\Arduino\\libraries\\HX711-master" "-IC:\\Users\\ml\\Documents\\Arduino\\libraries\\ESP32Servo-master\\src" "-IC:\\Users\\ml\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.0\\libraries\\Preferences\\src" "C:\\Users\\ml\\AppData\\Local\\Temp\\arduino_build_149019\\sketch\\Abfuellwaage.ino.cpp" -o nul
Using cached library dependencies for file: C:\Users\ml\Documents\Arduino\libraries\U8g2\src\U8x8lib.cpp
Using cached library dependencies for file: C:\Users\ml\Documents\Arduino\libraries\U8g2\src\clib\u8g2_bitmap.c
Using cached library dependencies for file: C:\Users\ml\Documents\Arduino\libraries\U8g2\src\clib\u8g2_box.c
Using cached library dependencies for file: C:\Users\ml\Documents\Arduino\libraries\U8g2\src\clib\u8g2_buffer.c
Using cached library dependencies for file: C:\Users\ml\Documents\Arduino\libraries\U8g2\src\clib\u8g2_circle.c
Using cached library dependencies for file: C:\Users\ml\Documents\Arduino\libraries\U8g2\src\clib\u8g2_cleardisplay.c
Using cached library dependencies for file: C:\Users\ml\Documents\Arduino\libraries\U8g2\src\clib\u8g2_d_memory.c
Using cached library dependencies for file: C:\Users\ml\Documents\Arduino\libraries\U8g2\src\clib\u8g2_d_setup.c
Using cached library dependencies for file: C:\Users\ml\Documents\Arduino\libraries\U8g2\src\clib\u8g2_font.c
Using cached library dependencies for file: C:\Users\ml\Documents\Arduino\libraries\U8g2\src\clib\u8g2_fonts.c
Using cached library dependencies for file: C:\Users\ml\Documents\Arduino\libraries\U8g2\src\clib\u8g2_hvline.c
Using cached library dependencies for file: C:\Users\ml\Documents\Arduino\libraries\U8g2\src\clib\u8g2_input_value.c
Using cached library dependencies for file: C:\Users\ml\Documents\Arduino\libraries\U8g2\src\clib\u8g2_intersection.c
Using cached library dependencies for file: C:\Users\ml\Documents\Arduino\libraries\U8g2\src\clib\u8g2_kerning.c
Using cached library dependencies for file: C:\Users\ml\Documents\Arduino\libraries\U8g2\src\clib\u8g2_line.c
Using cached library dependencies for file: C:\Users\ml\Documents\Arduino\libraries\U8g2\src\clib\u8g2_ll_hvline.c
Using cached library dependencies for file: C:\Users\ml\Documents\Arduino\libraries\U8g2\src\clib\u8g2_message.c
Using cached library dependencies for file: C:\Users\ml\Documents\Arduino\libraries\U8g2\src\clib\u8g2_polygon.c
Using cached library dependencies for file: C:\Users\ml\Documents\Arduino\libraries\U8g2\src\clib\u8g2_selection_list.c
Using cached library dependencies for file: C:\Users\ml\Documents\Arduino\libraries\U8g2\src\clib\u8g2_setup.c
Using cached library dependencies for file: C:\Users\ml\Documents\Arduino\libraries\U8g2\src\clib\u8log.c
Using cached library dependencies for file: C:\Users\ml\Documents\Arduino\libraries\U8g2\src\clib\u8log_u8g2.c
Using cached library dependencies for file: C:\Users\ml\Documents\Arduino\libraries\U8g2\src\clib\u8log_u8x8.c
Using cached library dependencies for file: C:\Users\ml\Documents\Arduino\libraries\U8g2\src\clib\u8x8_8x8.c
Using cached library dependencies for file: C:\Users\ml\Documents\Arduino\libraries\U8g2\src\clib\u8x8_byte.c
Using cached library dependencies for file: C:\Users\ml\Documents\Arduino\libraries\U8g2\src\clib\u8x8_cad.c
Using cached library dependencies for file: C:\Users\ml\Documents\Arduino\libraries\U8g2\src\clib\u8x8_d_a2printer.c
Using cached library dependencies for file: C:\Users\ml\Docum
Raspberry Pi2 als FHEM-Plattform
HM, FS20, 1-Wire, PanStamp,LW12,Intertechno,ESPEasy,Alexa

 

decade-submarginal