Velux KLF200 mit Firmware 2.0.0.71 für io-homecontrol

grappa24 · 12 März 2021, 14:08:45

Bei der Bedienung mit einer Fernbedienung läuft das Rollo einwandfrei bis zur Endposition, da klemmt nichts.

Sehr merkwürdig, immer ausgehend von "geschlossen" fährt es nach "set xxx up" unterschiedlich weit hoch, im Log konkret bis 77 pct.

Logfile:

Code Auswählen

2021.03.12 14:00:50 5: KLF200 (Velux_Neu) - received: 02110005a000a000f7fff7fff7fff7ff000066010000
2021.03.12 14:00:50 5: Velux_Neu: dispatch \002\021\000\005�\000�\000��������\000\000f\001\000\000
2021.03.12 14:00:50 5: KLF200Node (Velux_Neu) - received: 02110005a000a000f7fff7fff7fff7ff000066010000
2021.03.12 14:00:52 5: KLF200 (Velux_Neu) - received: 02110105a033a0334b6bf7fff7fff7ff000066030000
2021.03.12 14:00:52 5: Velux_Neu: dispatch \002\021\001\005�3�3Kk������\000\000f\003\000\000
2021.03.12 14:00:52 5: KLF200Node (Velux_Neu) - received: 02110105a033a0334b6bf7fff7fff7ff000066030000
2021.03.12 14:00:53 5: KLF200 (Velux_Neu) - received: 0211020564006400f7fff7fff7fff7ff000066050000
2021.03.12 14:00:53 5: Velux_Neu: dispatch \002\021\002\005d\000d\000��������\000\000f\005\000\000
2021.03.12 14:00:53 5: KLF200Node (Velux_Neu) - received: 0211020564006400f7fff7fff7fff7ff000066050000
2021.03.12 14:01:22 5: KLF200 Velux_Neu: unwrapped bytes     0300044e0805008000c8000000d400d400d400d400d400d400d400d400d400d400d400d400d400d400d40001010000000000000000000000000000000000000000000000
2021.03.12 14:01:22 5: KLF200 Velux_Neu: wrapped bytes c000450300044e0805008000c8000000d400d400d400d400d400d400d400d400d400d400d400d400d400d400d400010100000000000000000000000000000000000000000000009dc0
2021.03.12 14:01:22 5: SW: c000450300044e0805008000c8000000d400d400d400d400d400d400d400d400d400d400d400d400d400d400d400010100000000000000000000000000000000000000000000009dc0
2021.03.12 14:01:22 5: KLF200 (Velux_Neu) - received: 0301044e01
2021.03.12 14:01:22 5: KLF200 (Velux_Neu) GW_COMMAND_SEND_CFM 0301 1102 1
2021.03.12 14:01:22 5: KLF200 (Velux_Neu) Dequeue: regex = (?^:^\x03\x00)
2021.03.12 14:01:22 5: KLF200 (Velux_Neu) Dequeue: SessionID = 1102
2021.03.12 14:01:22 5: KLF200 (Velux_Neu) Dequeue: 0300044e0805008000c8000000d400d400d400d400d400d400d400d400d400d400d400d400d400d400d40001010000000000000000000000000000000000000000000000
2021.03.12 14:01:22 5: KLF200 (Velux_Neu) Dequeue: mached
2021.03.12 14:01:23 5: KLF200 (Velux_Neu) - received: 02110102a033c8004b6bf7fff7fff7ff000066220000
2021.03.12 14:01:23 5: Velux_Neu: dispatch \002\021\001\002�3�\000Kk������\000\000f"\000\000
2021.03.12 14:01:23 5: KLF200Node (Velux_Neu) - received: 02110102a033c8004b6bf7fff7fff7ff000066220000
2021.03.12 14:01:23 5: KLF200 (Velux_Neu) - received: 0302044e080100a033020006600450
2021.03.12 14:01:23 5: Velux_Neu: dispatch \003\002\004N\010\001\000�3\002\000\006`\004P
2021.03.12 14:01:23 5: KLF200Node (Velux_Neu) - received: 0302044e080100a033020006600450
2021.03.12 14:01:23 5: KLF200 (Velux_Neu) - received: 0303044e01000014
2021.03.12 14:01:23 5: Velux_Neu: dispatch \003\003\004N\001\000\000\024
2021.03.12 14:01:23 5: KLF200Node (Velux_Neu) - received: 0303044e01000014
2021.03.12 14:01:23 5: KLF200 (Velux_Neu) - received: 02110104a033c8000000f7fff7fff7ff001466230000
2021.03.12 14:01:23 5: Velux_Neu: dispatch \002\021\001\004�3�\000\000\000������\000\024f#\000\000
2021.03.12 14:01:23 5: KLF200Node (Velux_Neu) - received: 02110104a033c8000000f7fff7fff7ff001466230000
2021.03.12 14:01:45 5: KLF200 (Velux_Neu) - received: 0302044e080100c800000120600500
2021.03.12 14:01:45 5: Velux_Neu: dispatch \003\002\004N\010\001\000�\000\000\001 `\005\000
2021.03.12 14:01:45 5: KLF200Node (Velux_Neu) - received: 0302044e080100c800000120600500
2021.03.12 14:01:45 5: KLF200 (Velux_Neu) - received: 0304044e
2021.03.12 14:01:45 5: KLF200 (Velux_Neu) GW_SESSION_FINISHED_NTF 0304 1102
2021.03.12 14:01:45 5: KLF200 (Velux_Neu) Dequeue: regex = (?^:^(\x04\x12|\x03\x05|\x03\x12|\x03\x10))
2021.03.12 14:01:45 5: KLF200 (Velux_Neu) Dequeue: SessionID = 1102
2021.03.12 14:01:45 5: KLF200 (Velux_Neu) - received: 02110105c800c8000000f7fff7fff7ff000066380000
2021.03.12 14:01:45 5: Velux_Neu: dispatch \002\021\001\005�\000�\000\000\000������\000\000f8\000\000
2021.03.12 14:01:45 5: KLF200Node (Velux_Neu) - received: 02110105c800c8000000f7fff7fff7ff000066380000
2021.03.12 14:03:37 5: KLF200 Velux_Neu: unwrapped bytes     0300044f080500800000000000d400d400d400d400d400d400d400d400d400d400d400d400d400d400d40001010000000000000000000000000000000000000000000000
2021.03.12 14:03:37 5: KLF200 Velux_Neu: wrapped bytes c000450300044f080500800000000000d400d400d400d400d400d400d400d400d400d400d400d400d400d400d4000101000000000000000000000000000000000000000000000054c0
2021.03.12 14:03:37 5: SW: c000450300044f080500800000000000d400d400d400d400d400d400d400d400d400d400d400d400d400d400d4000101000000000000000000000000000000000000000000000054c0
2021.03.12 14:03:37 5: KLF200 (Velux_Neu) - received: 0301044f01
2021.03.12 14:03:37 5: KLF200 (Velux_Neu) GW_COMMAND_SEND_CFM 0301 1103 1
2021.03.12 14:03:37 5: KLF200 (Velux_Neu) Dequeue: regex = (?^:^\x03\x00)
2021.03.12 14:03:37 5: KLF200 (Velux_Neu) Dequeue: SessionID = 1103
2021.03.12 14:03:37 5: KLF200 (Velux_Neu) Dequeue: 0300044f080500800000000000d400d400d400d400d400d400d400d400d400d400d400d400d400d400d40001010000000000000000000000000000000000000000000000
2021.03.12 14:03:37 5: KLF200 (Velux_Neu) Dequeue: mached
2021.03.12 14:03:37 5: KLF200 (Velux_Neu) - received: 02110102c80000000000f7fff7fff7ff000066a90000
2021.03.12 14:03:37 5: Velux_Neu: dispatch \002\021\001\002�\000\000\000\000\000������\000\000f�\000\000
2021.03.12 14:03:37 5: KLF200Node (Velux_Neu) - received: 02110102c80000000000f7fff7fff7ff000066a90000
2021.03.12 14:03:37 5: KLF200 (Velux_Neu) - received: 0302044f080100c800020006600450
2021.03.12 14:03:37 5: Velux_Neu: dispatch \003\002\004O\010\001\000�\000\002\000\006`\004P
2021.03.12 14:03:37 5: KLF200Node (Velux_Neu) - received: 0302044f080100c800020006600450
2021.03.12 14:03:38 5: KLF200 (Velux_Neu) - received: 0303044f01000063
2021.03.12 14:03:38 5: Velux_Neu: dispatch \003\003\004O\001\000\000c
2021.03.12 14:03:38 5: KLF200Node (Velux_Neu) - received: 0303044f01000063
2021.03.12 14:03:38 5: KLF200 (Velux_Neu) - received: 02110104c80000000000f7fff7fff7ff006366a90000
2021.03.12 14:03:38 5: Velux_Neu: dispatch \002\021\001\004�\000\000\000\000\000������\000cf�\000\000
2021.03.12 14:03:38 5: KLF200Node (Velux_Neu) - received: 02110104c80000000000f7fff7fff7ff006366a90000
2021.03.12 14:04:00 5: KLF200 Velux_Neu: unwrapped bytes     030004500805008000d2000000d400d400d400d400d400d400d400d400d400d400d400d400d400d400d40001010000000000000000000000000000000000000000000000
2021.03.12 14:04:00 5: KLF200 Velux_Neu: wrapped bytes c00045030004500805008000d2000000d400d400d400d400d400d400d400d400d400d400d400d400d400d400d4000101000000000000000000000000000000000000000000000099c0
2021.03.12 14:04:00 5: SW: c00045030004500805008000d2000000d400d400d400d400d400d400d400d400d400d400d400d400d400d400d4000101000000000000000000000000000000000000000000000099c0
2021.03.12 14:04:00 5: KLF200 (Velux_Neu) - received: 0301045001
2021.03.12 14:04:00 5: KLF200 (Velux_Neu) GW_COMMAND_SEND_CFM 0301 1104 1
2021.03.12 14:04:00 5: KLF200 (Velux_Neu) Dequeue: regex = (?^:^\x03\x00)
2021.03.12 14:04:00 5: KLF200 (Velux_Neu) Dequeue: SessionID = 1104
2021.03.12 14:04:00 5: KLF200 (Velux_Neu) Dequeue: 030004500805008000d2000000d400d400d400d400d400d400d400d400d400d400d400d400d400d400d40001010000000000000000000000000000000000000000000000
2021.03.12 14:04:00 5: KLF200 (Velux_Neu) Dequeue: mached
2021.03.12 14:04:00 5: KLF200 (Velux_Neu) - received: 0302044f080100ffff001d10600400
2021.03.12 14:04:00 5: Velux_Neu: dispatch \003\002\004O\010\001\000��\000\035\020`\004\000
2021.03.12 14:04:00 5: KLF200Node (Velux_Neu) - received: 0302044f080100ffff001d10600400
2021.03.12 14:04:00 5: KLF200 (Velux_Neu) - received: 0304044f
2021.03.12 14:04:00 5: KLF200 (Velux_Neu) GW_SESSION_FINISHED_NTF 0304 1103
2021.03.12 14:04:00 5: KLF200 (Velux_Neu) Dequeue: regex = (?^:^(\x04\x12|\x03\x05|\x03\x12|\x03\x10))
2021.03.12 14:04:00 5: KLF200 (Velux_Neu) Dequeue: SessionID = 1103
2021.03.12 14:04:00 5: KLF200 (Velux_Neu) - received: 02110102c800d2000000f7fff7fff7ff000066c00000
2021.03.12 14:04:00 5: Velux_Neu: dispatch \002\021\001\002�\000�\000\000\000������\000\000f�\000\000
2021.03.12 14:04:00 5: KLF200Node (Velux_Neu) - received: 02110102c800d2000000f7fff7fff7ff000066c00000
2021.03.12 14:04:00 5: KLF200 (Velux_Neu) - received: 030204500801009a2c020006600450
2021.03.12 14:04:00 5: Velux_Neu: dispatch \003\002\004P\010\001\000�,\002\000\006`\004P
2021.03.12 14:04:00 5: KLF200Node (Velux_Neu) - received: 030204500801009a2c020006600450
2021.03.12 14:04:01 5: KLF200 (Velux_Neu) - received: 0303045001000000
2021.03.12 14:04:01 5: Velux_Neu: dispatch \003\003\004P\001\000\000\000
2021.03.12 14:04:01 5: KLF200Node (Velux_Neu) - received: 0303045001000000
2021.03.12 14:04:02 5: KLF200 (Velux_Neu) - received: 03020450080100998c000120600500
2021.03.12 14:04:02 5: Velux_Neu: dispatch \003\002\004P\010\001\000��\000\001 `\005\000
2021.03.12 14:04:02 5: KLF200Node (Velux_Neu) - received: 03020450080100998c000120600500
2021.03.12 14:04:02 5: KLF200 (Velux_Neu) - received: 03040450
2021.03.12 14:04:02 5: KLF200 (Velux_Neu) GW_SESSION_FINISHED_NTF 0304 1104
2021.03.12 14:04:02 5: KLF200 (Velux_Neu) Dequeue: regex = (?^:^(\x04\x12|\x03\x05|\x03\x12|\x03\x10))
2021.03.12 14:04:02 5: KLF200 (Velux_Neu) Dequeue: SessionID = 1104
2021.03.12 14:04:02 5: KLF200 (Velux_Neu) - received: 02110105998c998c4ad7f7fff7fff7ff000066c20000
2021.03.12 14:04:02 5: Velux_Neu: dispatch \002\021\001\005����J�������\000\000f�\000\000
2021.03.12 14:04:02 5: KLF200Node (Velux_Neu) - received: 02110105998c998c4ad7f7fff7fff7ff000066c20000

jump to the top

Code Auswählen

Eventlog: [quote]2021-03-12 14:03:37 KLF200 Velux_Neu sessionID: 1103
2021-03-12 14:03:37 KLF200 Velux_Neu queueSize: 1
2021-03-12 14:03:37 KLF200Node dg_rollo_links up
2021-03-12 14:03:37 KLF200 Velux_Neu queueSize: 0
2021-03-12 14:03:37 KLF200Node dg_rollo_links MPtarget: 0
2021-03-12 14:03:37 KLF200Node dg_rollo_links target: 0
2021-03-12 14:03:37 KLF200Node dg_rollo_links execution: up
2021-03-12 14:03:37 KLF200Node dg_rollo_links pct_r: 100
2021-03-12 14:03:38 KLF200Node dg_rollo_links sessionID: 1103
2021-03-12 14:03:38 KLF200Node dg_rollo_links sessionInformationCode: 06600450
2021-03-12 14:03:38 KLF200Node dg_rollo_links lastRunStatus: EXECUTION ACTIVE
2021-03-12 14:03:38 KLF200Node dg_rollo_links lastStatusReply: UNKNOWN STATUS REPLY
2021-03-12 14:03:38 KLF200Node dg_rollo_links pct_r: 100
2021-03-12 14:03:38 KLF200Node dg_rollo_links remaining: 99
2021-03-12 14:03:38 KLF200Node dg_rollo_links pct_r: 100
2021-03-12 14:03:38 KLF200Node dg_rollo_links targetArrival: 2021-03-12 14:05:17
2021-03-12 14:03:38 KLF200Node dg_rollo_links operatingState: Executing
2021-03-12 14:03:38 KLF200Node dg_rollo_links pct_r: 100
2021-03-12 14:04:00 KLF200 Velux_Neu sessionID: 1104
2021-03-12 14:04:00 KLF200 Velux_Neu queueSize: 1
2021-03-12 14:04:00 KLF200Node dg_rollo_links stop
2021-03-12 14:04:00 KLF200 Velux_Neu queueSize: 0
2021-03-12 14:04:00 KLF200Node dg_rollo_links sessionInformationCode: 10600400
2021-03-12 14:04:00 KLF200Node dg_rollo_links lastRunStatus: EXECUTION COMPLETED
2021-03-12 14:04:00 KLF200Node dg_rollo_links lastStatusReply: COMMAND OVERRULED
2021-03-12 14:04:00 KLF200Node dg_rollo_links pct_r: 100
2021-03-12 14:04:00 KLF200Node dg_rollo_links MPtarget: 53760
2021-03-12 14:04:00 KLF200Node dg_rollo_links execution: stop
2021-03-12 14:04:00 KLF200Node dg_rollo_links remaining: 0
2021-03-12 14:04:00 KLF200Node dg_rollo_links pct_r: 100
2021-03-12 14:04:00 KLF200Node dg_rollo_links sessionID: 1104
2021-03-12 14:04:00 KLF200Node dg_rollo_links sessionInformationCode: 06600450
2021-03-12 14:04:00 KLF200Node dg_rollo_links lastRunStatus: EXECUTION ACTIVE
2021-03-12 14:04:00 KLF200Node dg_rollo_links lastStatusReply: UNKNOWN STATUS REPLY
2021-03-12 14:04:00 KLF200Node dg_rollo_links pct_r: 100
2021-03-12 14:04:01 KLF200Node dg_rollo_links pct_r: 100
2021-03-12 14:04:02 KLF200Node dg_rollo_links sessionInformationCode: 20600500
2021-03-12 14:04:02 KLF200Node dg_rollo_links lastRunStatus: EXECUTION COMPLETED
2021-03-12 14:04:02 KLF200Node dg_rollo_links lastStatusReply: COMMAND COMPLETED OK
2021-03-12 14:04:02 KLF200Node dg_rollo_links pct_r: 100
2021-03-12 14:04:02 KLF200Node dg_rollo_links MP: 39308
2021-03-12 14:04:02 KLF200Node dg_rollo_links pct: 77
2021-03-12 14:04:02 KLF200Node dg_rollo_links 77
2021-03-12 14:04:02 KLF200Node dg_rollo_links MPtarget: 39308
2021-03-12 14:04:02 KLF200Node dg_rollo_links target: 77
2021-03-12 14:04:02 KLF200Node dg_rollo_links operatingState: Done
2021-03-12 14:04:02 KLF200Node dg_rollo_links FP1: 19159
2021-03-12 14:04:02 KLF200Node dg_rollo_links pct_r: 80[/quote]

buennerbernd · 12 März 2021, 14:31:08

Code Auswählen


2021-03-12 14:04:00 KLF200Node dg_rollo_links stop

Du hast um 14:04:00 per FHEM irgendwie stop aufgerufen.
Irgendein Automatismus der Amok läuft?

grappa24 · 12 März 2021, 14:44:06

Zitat von: buennerbernd am 12 März 2021, 14:31:08
Code Auswählen Erweitern
2021-03-12 14:04:00 KLF200Node dg_rollo_links stop

Du hast um 14:04:00 per FHEM irgendwie stop aufgerufen.
Irgendein Automatismus der Amok läuft?

nee, kein Automatismus, nachlässiger Programmierer

Codereste meiner ersten Implementierung mit dem TYPE ROLLO - Asche auf mein Haupt. Jetzt läuft alles so wie es soll - Danke!

grappa24 · 17 März 2021, 18:55:29

Kann man denn diese Somfy Windsensoren am KLF200 anlernen bzw. dann über FHEM auslesen? ... z.B. den Somfy Eolis Wirefree io

buennerbernd · 17 März 2021, 22:22:29

Zitat von: grappa24 am 17 März 2021, 18:55:29
Kann man denn diese Somfy Windsensoren am KLF200 anlernen bzw. dann über FHEM auslesen? ... z.B. den Somfy Eolis Wirefree io

Den Sensor wirst du höchstwahrscheinlich nicht an der KLF200 anlernen können. Der Windsensor ist eher so etwas wie eine Fernbedienung. Den Sensor kannst du bestimmt mit deinen Geräten direkt koppeln. Mit der KLF200 kannst du dann immerhin erkennen, mit welcher Fernbedienung deine Geräte bewegt wurden.

My-FHEM · 28 März 2021, 13:09:18

Hallo,

In meiner Installation ist der KLF200 gestorben. Insgesamt hatte ich 8 Devices angelernt.

Mittlerweile habe ich einen Ersatz KLF200 beschafft. Dieser findet im WEBUI die zugehörigen
Fernbedienungen der Devices nicht. (Produkt suchen 1 Sec Zahnrad drücken).

Woran liegt das? Muss ich eventl. alle Fernbedienungen wieder rücksetzen und alles komplett
neu anlernen? Dh. aufs Dach?

Weiß jemand ob es ggf. anders geht?

pejonp · 28 März 2021, 14:30:00

@My-FHEM

Was hast du für Fernbedienungen ?
Ich glaube wenn du ein Velux Control Pad KLR200 hast, kannst du von dort die Daten auf das KLF200 übertragen ?! Glaube ich. Zumindestes kann man von einem KLR200 die Daten auf ein anderes übertragen.

pejonp

My-FHEM · 28 März 2021, 18:44:24

Ich habe kli313. KLR200 sind zwei Wege Fernbedienungen.

pejonp · 28 März 2021, 18:48:05

@My-FHEM

schau mal hier (https://forum.fhem.de/index.php/topic,92907.msg1124704.html#msg1124704). Du kannst doch im KFL200 Fernbedienungen einlesen und auch Daten an diese senden.

pejonp

My-FHEM · 29 März 2021, 15:08:23

Ja man kann in den KLF200 die KLI313 anlernen (einlesen). Man kann aber nicht an die Einwegefernbedinungen senden.
Die KLF200 benutzt die Fernbedinungsdaten um an die Devices (Fenster, Rollos) zu senden.

Meine Frage ist: Kann ich an eine neue KLF200, Fernbedienungen, welche an eine andere KLF200 angelernt waren anlernen?

Elektrolurch · 29 April 2021, 16:16:55

Hallo,

stelle gerade mein Netzwerk um. Dabei ist mir folgendes aufgefallen:

Wollte per "defmode" die Definition vom KLF200 - device von einer IP-Adresse auf den hostnamen ändern.
Dabei bleibt fhem hängen und ich muss es komplett neu starten.
Eine Analyse des codes hat folgendes ergeben:

Im define wird das Passwort auf Basis des hostnamens gebildet und aus der entsprechenden fhem-Datei ausgelesen.

Code Auswählen


  # close connection if maybe open (on definition modify)
  DevIo_CloseDev($hash) if(DevIo_IsOpen($hash));  
  
  # open connection with custom init and error callback function (non-blocking connection establishment)
  DevIo_OpenDev($hash, 0, "KLF200_Init", "KLF200_Callback");

Dabei wird die neue Verbindung versucht zu öffnen auf Basis des geänderten Hostnamens (Passwortes), welches natürlich noch nicht vorhanden ist.
Warum fhem hängen bleibt, kann ich allerdings nicht nachvollziehen.
"defmod" funktioniert so leider nicht.

Elektrolurch

buennerbernd · 29 April 2021, 22:14:26

Danke für die Info. Wenn ich mal ganz ausgeschlafen bin, versuche ich das Problem mal zu durchdringen.

BAfH · 07 Mai 2021, 10:32:36

UPDATE....
Geduld muss man haben, jetzt läuft es wieder... Keine Ahnung warum. Ich bin da mal wie eine Anwender "Ich habe nichts gemacht"

Hallo,
ich habe folgendes Problem, meine KLF200 Integration die fehlerfrei lief, ist seit Dienstag nicht mehr steuerbar.
Was ist passiert, ich habe das Module Homeconnect implemetiert, FHEM Update und Restart. Homeconnect läuft, Abends sollen Velux Komponenten angesprochen werden, aber nix mehr.
So, heute hatte ich Zeit. Habe etwas gesucht und folgendes bei KLF200 mit Verbose 5 gefunden

Code Auswählen

KLF200 (Velux) - Gateway Error: ERROR on Frame Structure.
Also habe alle Velux Komponenten gelöscht

Code Auswählen

delete FileLog_.*
delete Velux_.*
delete Velux.*

,
gespeichert, FHEM Reboot
Alles neu angelegt.

Code Auswählen

defmod Velux KLF200 192.x.x.x
attr Velux DbLogExclude .*
attr Velux room Interfaces,KLF200Node
attr Velux verbose 5

Auszug aus dem Log

Code Auswählen

2021.05.07 10:19:39.060 3: Opening Velux device 192.168.10.35:51200,
2021.05.07 10:19:43.423 3: Velux device opened,
2021.05.07 10:19:44.300 5: KLF200 (Velux) Dequeue: mached,
2021.05.07 10:19:44.304 5: KLF200 Velux: unwrapped bytes     0202,
2021.05.07 10:19:44.304 5: KLF200 Velux: wrapped bytes c00003020203c0,
2021.05.07 10:19:44.304 5: SW: c00003020203c0,
2021.05.07 10:19:44.507 5: KLF200 (Velux) - received: 02030004,
2021.05.07 10:19:44.507 5: KLF200 (Velux) - ignored:  02030004,
2021.05.07 10:19:44.516 5: KLF200 (Velux) - received: 020400000101526f6c6c6c6164656e205363686c61667a696d6d6572000000000000000000000000000000000000000000000000000000000000000000000000000000000000010080010100004756233d5a0a300203fff7fff7fff7fff7fff7fff7ff00006094f81f000000000000000000000000000000000000000000,
2021.05.07 10:19:44.516 5: Velux: dispatch \002\004\000\000\001\001Rollladen Schlafzimmer\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\001\000�\001\001\000\000GV#=Z\n0\002\003�������������\000\000`��\037\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000,
2021.05.07 10:19:44.542 5: KLF200Node (Velux) - received: 020400000101526f6c6c6c6164656e205363686c61667a696d6d6572000000000000000000000000000000000000000000000000000000000000000000000000000000000000010080010100004756233d5a0a300203fff7fff7fff7fff7fff7fff7ff00006094f81f000000000000000000000000000000000000000000,
2021.05.07 10:19:44.552 2: autocreate: define Velux_0 KLF200Node 192.168.10.35:51200 0,
2021.05.07 10:19:44.554 2: autocreate: define FileLog_Velux_0 FileLog ./log/Velux_0-%Y.log Velux_0,
2021.05.07 10:19:44.588 1: KLF200 (Velux) - new Node found, updateAll,
2021.05.07 10:19:44.595 5: KLF200 (Velux) - received: 02040100020246656e737465722047c3a47374657a696d6d657200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000001010301000030563613260e290baefff7fff7fff7fff7fff7fff7ff00006094f81f02d8026400d803ba00000000000000000000000000,
2021.05.07 10:19:44.595 5: Velux: dispatch \002\004\001\000\002\002Fenster Gästezimmer\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\001\001\003\001\000\0000V6\023&\016)\013��������������\000\000`��\037\002�\002d\000�\003�\000\000\000\000\000\000\000\000\000\000\000\000\000,
2021.05.07 10:19:44.595 5: KLF200Node (Velux) - received: 02040100020246656e737465722047c3a47374657a696d6d657200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000001010301000030563613260e290baefff7fff7fff7fff7fff7fff7ff00006094f81f02d8026400d803ba00000000000000000000000000,
2021.05.07 10:19:44.615 2: autocreate: define Velux_1 KLF200Node 192.168.10.35:51200 1,
2021.05.07 10:19:44.617 2: autocreate: define FileLog_Velux_1 FileLog ./log/Velux_1-%Y.log Velux_1,
2021.05.07 10:19:44.634 1: KLF200 (Velux) - new Node found, updateAll,
2021.05.07 10:19:44.637 5: KLF200 (Velux) - received: 020402000102526f6c6c6c6164656e2047c3a47374657a696d6d6572000000000000000000000000000000000000000000000000000000000000000000000000000000000000000080010100000d563214260e1f00b1fff7fff7fff7fff7fff7fff7ff00006094f81f000000000000000000000000000000000000000000,
2021.05.07 10:19:44.637 5: Velux: dispatch \002\004\002\000\001\002Rollladen Gästezimmer\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000�\001\001\000\000\rV2\024&\016\037\000��������������\000\000`��\037\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000,
2021.05.07 10:19:44.637 5: KLF200Node (Velux) - received: 020402000102526f6c6c6c6164656e2047c3a47374657a696d6d6572000000000000000000000000000000000000000000000000000000000000000000000000000000000000000080010100000d563214260e1f00b1fff7fff7fff7fff7fff7fff7ff00006094f81f000000000000000000000000000000000000000000,
2021.05.07 10:19:44.634 1: KLF200 (Velux) - new Node found, updateAll,
2021.05.07 10:19:44.637 5: KLF200 (Velux) - received: 020402000102526f6c6c6c6164656e2047c3a47374657a696d6d6572000000000000000000000000000000000000000000000000000000000000000000000000000000000000000080010100000d563214260e1f00b1fff7fff7fff7fff7fff7fff7ff00006094f81f000000000000000000000000000000000000000000,
2021.05.07 10:19:44.637 5: Velux: dispatch \002\004\002\000\001\002Rollladen Gästezimmer\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000�\001\001\000\000\rV2\024&\016\037\000��������������\000\000`��\037\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000,
2021.05.07 10:19:44.637 5: KLF200Node (Velux) - received: 020402000102526f6c6c6c6164656e2047c3a47374657a696d6d6572000000000000000000000000000000000000000000000000000000000000000000000000000000000000000080010100000d563214260e1f00b1fff7fff7fff7fff7fff7fff7ff00006094f81f000000000000000000000000000000000000000000,
2021.05.07 10:19:44.659 2: autocreate: define Velux_2 KLF200Node 192.168.10.35:51200 2,
2021.05.07 10:19:44.661 2: autocreate: define FileLog_Velux_2 FileLog ./log/Velux_2-%Y.log Velux_2,
2021.05.07 10:19:44.674 1: KLF200 (Velux) - new Node found, updateAll,
2021.05.07 10:19:44.676 5: KLF200 (Velux) - received: 02040300000146656e73746572205363686c61667a696d6d65720000000000000000000000000000000000000000000000000000000000000000000000000000000000000000010101030100000256185e5a0b030544fff7fff7fff7fff7fff7fff7ff00006094f81f01d803b21c00000000000000000000000000000000,
2021.05.07 10:19:44.676 5: Velux: dispatch \002\004\003\000\000\001Fenster Schlafzimmer\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\001\001\001\003\001\000\000\002V\030^Z\013\003\005D�������������\000\000`��\037\001�\003�\034\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000,
2021.05.07 10:19:44.676 5: KLF200Node (Velux) - received: 02040300000146656e73746572205363686c61667a696d6d65720000000000000000000000000000000000000000000000000000000000000000000000000000000000000000010101030100000256185e5a0b030544fff7fff7fff7fff7fff7fff7ff00006094f81f01d803b21c00000000000000000000000000000000,
2021.05.07 10:19:44.697 2: autocreate: define Velux_3 KLF200Node 192.168.10.35:51200 3,
2021.05.07 10:19:44.699 2: autocreate: define FileLog_Velux_3 FileLog ./log/Velux_3-%Y.log Velux_3,
2021.05.07 10:19:44.712 1: KLF200 (Velux) - new Node found, updateAll,
2021.05.07 10:19:44.714 5: KLF200 (Velux) - received: 0205,
2021.05.07 10:19:44.714 5: KLF200 (Velux) GW_GET_ALL_NODES_INFORMATION_FINISHED_NTF 0205,
2021.05.07 10:19:44.714 5: KLF200 (Velux) Dequeue: regex = (?^:^\x02\x02),
2021.05.07 10:19:44.714 5: KLF200 (Velux) Dequeue: 0202,
2021.05.07 10:19:44.714 5: KLF200 (Velux) Dequeue: mached,
2021.05.07 10:19:44.735 5: KLF200 Velux: unwrapped bytes     0100,
2021.05.07 10:19:44.736 5: KLF200 Velux: wrapped bytes c00003010002c0,
2021.05.07 10:19:44.736 5: SW: c00003010002c0,
2021.05.07 10:19:44.760 5: KLF200 (Velux) - received: 0101,
2021.05.07 10:19:44.760 5: KLF200 (Velux) - ignored:  0101,
2021.05.07 10:19:44.762 5: KLF200 (Velux) - received: 01020400c28d1e00804401ee90d3010278df01010c010278df02bcd7f0008044010278df03ee90d301010c01ee90d300,
2021.05.07 10:19:44.762 5: Velux: dispatch \001\002\004\000\036\000�D\001���\001\002x�\001\001\f\001\002x�\002���\000�D\001\002x�\003���\001\001\f\001���\000,
2021.05.07 10:19:44.762 5: KLF200Node (Velux) - received: 01020400c28d1e00804401ee90d3010278df01010c010278df02bcd7f0008044010278df03ee90d301010c01ee90d300,
2021.05.07 10:19:44.763 5: KLF200Node (Velux) GW_CS_GET_SYSTEMTABLE_DATA_NTF 0102 4 0,
2021.05.07 10:19:44.764 5: KLF200 (Velux) Dequeue: regex = (?^:^\x01\x00),
2021.05.07 10:19:44.764 5: KLF200 (Velux) Dequeue: 0100,
2021.05.07 10:19:44.764 5: KLF200 (Velux) Dequeue: mached,
2021.05.07 10:19:44.764 5: KLF200 Velux: unwrapped bytes     0008,
2021.05.07 10:19:44.764 5: KLF200 Velux: wrapped bytes c0000300080bc0,
2021.05.07 10:19:44.764 5: SW: c0000300080bc0,
2021.05.07 10:19:44.777 5: KLF200 (Velux) - received: 0009000200004700060e03,
2021.05.07 10:19:44.777 5: KLF200 (Velux) GW_GET_VERSION_CFM 0009 0.2.0.0.71.0 6,
2021.05.07 10:19:44.782 5: KLF200 (Velux) Dequeue: regex = (?^:^\x00\x08),
2021.05.07 10:19:44.782 5: KLF200 (Velux) Dequeue: 0008,
2021.05.07 10:19:44.782 5: KLF200 (Velux) Dequeue: mached,
2021.05.07 10:19:44.786 5: KLF200 Velux: unwrapped bytes     0240,
2021.05.07 10:19:44.786 5: KLF200 Velux: wrapped bytes c00003024041c0,
2021.05.07 10:19:44.786 5: SW: c00003024041c0,
2021.05.07 10:19:45.795 5: KLF200 (Velux) - received: 0241,
2021.05.07 10:19:45.795 5: KLF200 (Velux) GW_HOUSE_STATUS_MONITOR_ENABLE_CFM 0241,
2021.05.07 10:19:45.795 5: KLF200 (Velux) Dequeue: regex = (?^:^\x02\x40),
2021.05.07 10:19:45.795 5: KLF200 (Velux) Dequeue: 0240,
2021.05.07 10:19:45.796 5: KLF200 (Velux) Dequeue: mached,
2021.05.07 10:20:01.236 2: AttrTemplates: got 228 entries,
2021.05.07 10:20:04.714 5: KLF200 (Velux) GW_GET_SCENE_LIST_REQ,
2021.05.07 10:20:04.746 5: KLF200 Velux: unwrapped bytes     040c,
2021.05.07 10:20:04.747 5: KLF200 Velux: wrapped bytes c00003040c0bc0,
2021.05.07 10:20:04.747 5: SW: c00003040c0bc0,
2021.05.07 10:20:04.749 5: KLF200 (Velux) GW_GET_ALL_NODES_INFORMATION_REQ,
2021.05.07 10:20:04.755 5: KLF200 (Velux) GW_CS_GET_SYSTEMTABLE_DATA_REQ,
2021.05.07 10:20:04.761 5: KLF200 (Velux) GW_GET_VERSION_REQ,
2021.05.07 10:20:04.767 5: KLF200 (Velux) GW_HOUSE_STATUS_MONITOR_ENABLE_REQ,
2021.05.07 10:20:04.906 5: KLF200 (Velux) Dequeue: regex = (?^:^\x04\x0C),
2021.05.07 10:20:04.906 5: KLF200 (Velux) Dequeue: 040c,
2021.05.07 10:20:04.906 5: KLF200 (Velux) Dequeue: mached,
2021.05.07 10:20:04.913 5: KLF200 Velux: unwrapped bytes     0202,
2021.05.07 10:20:04.914 5: KLF200 Velux: wrapped bytes c00003020203c0,
2021.05.07 10:20:04.914 5: SW: c00003020203c0,
2021.05.07 10:20:05.116 5: KLF200 (Velux) - received: 02030004,
2021.05.07 10:20:05.116 5: KLF200 (Velux) - ignored:  02030004,
2021.05.07 10:20:05.125 5: KLF200 (Velux) - received: 020400000101526f6c6c6c6164656e205363686c61667a696d6d6572000000000000000000000000000000000000000000000000000000000000000000000000000000000000010080010100004756233d5a0a300203fff7fff7fff7fff7fff7fff7ff00006094f834000000000000000000000000000000000000000000,
2021.05.07 10:20:05.125 5: Velux: dispatch \002\004\000\000\001\001Rollladen Schlafzimmer\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\001\000�\001\001\000\000GV#=Z\n0\002\003�������������\000\000`��4\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000,
2021.05.07 10:20:05.125 5: KLF200Node (Velux) - received: 020400000101526f6c6c6c6164656e205363686c61667a696d6d6572000000000000000000000000000000000000000000000000000000000000000000000000000000000000010080010100004756233d5a0a300203fff7fff7fff7fff7fff7fff7ff00006094f834000000000000000000000000000000000000000000,
2021.05.07 10:20:05.147 5: KLF200 (Velux) - received: 02040100020246656e737465722047c3a47374657a696d6d657200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000001010301000030563613260e290baefff7fff7fff7fff7fff7fff7ff00006094f83402d8026400d803ba00000000000000000000000000,
2021.05.07 10:20:05.148 5: Velux: dispatch \002\004\001\000\002\002Fenster Gästezimmer\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\001\001\003\001\000\0000V6\023&\016)\013��������������\000\000`��4\002�\002d\000�\003�\000\000\000\000\000\000\000\000\000\000\000\000\000,
2021.05.07 10:20:05.148 5: KLF200Node (Velux) - received: 02040100020246656e737465722047c3a47374657a696d6d657200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000001010301000030563613260e290baefff7fff7fff7fff7fff7fff7ff00006094f83402d8026400d803ba00000000000000000000000000,
2021.05.07 10:20:05.176 5: KLF200 (Velux) - received: 020402000102526f6c6c6c6164656e2047c3a47374657a696d6d6572000000000000000000000000000000000000000000000000000000000000000000000000000000000000000080010100000d563214260e1f00b1fff7fff7fff7fff7fff7fff7ff00006094f834000000000000000000000000000000000000000000,
2021.05.07 10:20:05.176 5: Velux: dispatch \002\004\002\000\001\002Rollladen Gästezimmer\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000�\001\001\000\000\rV2\024&\016\037\000��������������\000\000`��4\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000,
2021.05.07 10:20:05.176 5: KLF200Node (Velux) - received: 020402000102526f6c6c6c6164656e2047c3a47374657a696d6d6572000000000000000000000000000000000000000000000000000000000000000000000000000000000000000080010100000d563214260e1f00b1fff7fff7fff7fff7fff7fff7ff00006094f834000000000000000000000000000000000000000000,
2021.05.07 10:20:05.197 5: KLF200 (Velux) - received: 02040300000146656e73746572205363686c61667a696d6d65720000000000000000000000000000000000000000000000000000000000000000000000000000000000000000010101030100000256185e5a0b030544fff7fff7fff7fff7fff7fff7ff00006094f83401d803b21c00000000000000000000000000000000,
2021.05.07 10:20:05.197 5: Velux: dispatch \002\004\003\000\000\001Fenster Schlafzimmer\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\001\001\001\003\001\000\000\002V\030^Z\013\003\005D�������������\000\000`��4\001�\003�\034\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000,
2021.05.07 10:20:05.197 5: KLF200Node (Velux) - received: 02040300000146656e73746572205363686c61667a696d6d65720000000000000000000000000000000000000000000000000000000000000000000000000000000000000000010101030100000256185e5a0b030544fff7fff7fff7fff7fff7fff7ff00006094f83401d803b21c00000000000000000000000000000000,
2021.05.07 10:20:05.225 5: KLF200 (Velux) - received: 0205,
2021.05.07 10:20:05.225 5: KLF200 (Velux) GW_GET_ALL_NODES_INFORMATION_FINISHED_NTF 0205,
2021.05.07 10:20:05.225 5: KLF200 (Velux) Dequeue: regex = (?^:^\x02\x02),
2021.05.07 10:20:05.225 5: KLF200 (Velux) Dequeue: 0202,
2021.05.07 10:20:05.225 5: KLF200 (Velux) Dequeue: mached,
2021.05.07 10:20:05.229 5: KLF200 Velux: unwrapped bytes     0100,
2021.05.07 10:20:05.229 5: KLF200 Velux: wrapped bytes c00003010002c0,
2021.05.07 10:20:05.230 5: SW: c00003010002c0,
2021.05.07 10:20:05.367 5: KLF200 (Velux) - received: 0101,
2021.05.07 10:20:05.368 5: KLF200 (Velux) - ignored:  0101,
2021.05.07 10:20:05.367 5: KLF200 (Velux) - received: 0101,
2021.05.07 10:20:05.368 5: KLF200 (Velux) - ignored:  0101,
2021.05.07 10:20:05.370 5: KLF200 (Velux) - received: 01020400c28d1e00804401ee90d3010278df01010c010278df02bcd7f0008044010278df03ee90d301010c01ee90d300,
2021.05.07 10:20:05.371 5: Velux: dispatch \001\002\004\000\036\000�D\001���\001\002x�\001\001\f\001\002x�\002���\000�D\001\002x�\003���\001\001\f\001���\000,
2021.05.07 10:20:05.371 5: KLF200Node (Velux) - received: 01020400c28d1e00804401ee90d3010278df01010c010278df02bcd7f0008044010278df03ee90d301010c01ee90d300,
2021.05.07 10:20:05.372 5: KLF200Node (Velux) GW_CS_GET_SYSTEMTABLE_DATA_NTF 0102 4 0,
2021.05.07 10:20:05.372 5: KLF200 (Velux) Dequeue: regex = (?^:^\x01\x00),
2021.05.07 10:20:05.372 5: KLF200 (Velux) Dequeue: 0100,
2021.05.07 10:20:05.372 5: KLF200 (Velux) Dequeue: mached,
2021.05.07 10:20:05.373 5: KLF200 Velux: unwrapped bytes     0008,
2021.05.07 10:20:05.373 5: KLF200 Velux: wrapped bytes c0000300080bc0,
2021.05.07 10:20:05.373 5: SW: c0000300080bc0,
2021.05.07 10:20:05.393 5: KLF200 (Velux) - received: 0009000200004700060e03,
2021.05.07 10:20:05.393 5: KLF200 (Velux) GW_GET_VERSION_CFM 0009 0.2.0.0.71.0 6,
2021.05.07 10:20:05.394 5: KLF200 (Velux) Dequeue: regex = (?^:^\x00\x08),
2021.05.07 10:20:05.394 5: KLF200 (Velux) Dequeue: 0008,
2021.05.07 10:20:05.394 5: KLF200 (Velux) Dequeue: mached,
2021.05.07 10:20:05.398 5: KLF200 Velux: unwrapped bytes     0240,
2021.05.07 10:20:05.398 5: KLF200 Velux: wrapped bytes c00003024041c0,
2021.05.07 10:20:05.398 5: SW: c00003024041c0,
2021.05.07 10:20:05.588 5: KLF200 (Velux) - received: 0241,
2021.05.07 10:20:05.588 5: KLF200 (Velux) GW_HOUSE_STATUS_MONITOR_ENABLE_CFM 0241,
2021.05.07 10:20:05.588 5: KLF200 (Velux) Dequeue: regex = (?^:^\x02\x40),
2021.05.07 10:20:05.588 5: KLF200 (Velux) Dequeue: 0240,
2021.05.07 10:20:05.588 5: KLF200 (Velux) Dequeue: mached,
2021.05.07 10:20:05.592 5: KLF200 Velux: unwrapped bytes     031200010101000000000000000000000000000000000000000000,
2021.05.07 10:20:05.593 5: KLF200 Velux: wrapped bytes c0001c0312000101010000000000000000000000000000000000000000000cc0,
2021.05.07 10:20:05.593 5: SW: c0001c0312000101010000000000000000000000000000000000000000000cc0,
2021.05.07 10:20:05.800 5: KLF200 (Velux) - received: 0313000101,
2021.05.07 10:20:05.800 5: KLF200 (Velux) - ignored:  0313000101,
2021.05.07 10:20:05.801 5: KLF200 (Velux) - received: 03020002010100ffff001d10000000,
2021.05.07 10:20:05.802 5: Velux: dispatch \003\002\000\002\001\001\000��\000\035\020\000\000\000,
2021.05.07 10:20:05.802 5: KLF200Node (Velux) - received: 03020002010100ffff001d10000000,
2021.05.07 10:20:05.826 5: KLF200 (Velux) - received: 03040002,
2021.05.07 10:20:05.827 5: KLF200 (Velux) GW_SESSION_FINISHED_NTF 0304 2,
2021.05.07 10:20:05.827 5: KLF200 (Velux) Dequeue: regex = (?^:^(\x04\x12|\x03\x05|\x03\x12|\x03\x10)),
2021.05.07 10:20:05.827 5: KLF200 (Velux) Dequeue: SessionID = 2,
2021.05.07 10:20:05.828 5: KLF200 (Velux) Dequeue: 031200010101000000000000000000000000000000000000000000,

Meine Fenster Gästezimmer

Code Auswählen

defmod Velux_1 KLF200Node 192.168.10.35:51200 1
attr Velux_1 alias Fenster Gästezimmer
attr Velux_1 room KLF200Node

setstate Velux_1 2021-05-07 10:20:05 MP 63487
setstate Velux_1 2021-05-07 10:20:05 MPtarget 63487
setstate Velux_1 2021-05-07 10:19:44 actuatorAddress 0278df
setstate Velux_1 2021-05-07 10:19:44 backboneReferenceNumber 0278df
setstate Velux_1 2021-05-07 10:20:05 buildNumber 48
setstate Velux_1 2021-05-07 10:20:05 execution stop
setstate Velux_1 2021-05-07 10:19:44 ioManufacturer VELUX
setstate Velux_1 2021-05-07 10:19:44 limitationUpdateInterval onChange
setstate Velux_1 2021-05-07 10:20:05 model VELUX KMG Window opener with integrated rain sensor
setstate Velux_1 2021-05-07 10:20:05 name Fenster Gästezimmer
setstate Velux_1 2021-05-07 10:19:44 nodeTypeSubType Window opener with integrated rain sensor
setstate Velux_1 2021-05-07 10:20:05 nodeVariation NOT SET
setstate Velux_1 2021-05-07 10:20:05 powerMode ALWAYS ALIVE
setstate Velux_1 2021-05-07 10:20:05 productCode KMG
setstate Velux_1 2021-05-07 10:20:05 productGroup 3
setstate Velux_1 2021-05-07 10:20:05 productType 1
setstate Velux_1 2021-05-07 10:20:05 production 2014 week 41
setstate Velux_1 2021-05-07 10:20:05 remaining 0
setstate Velux_1 2021-05-07 10:20:05 serial 86 13843 38 14 41 2990
setstate Velux_1 2021-05-07 10:20:05 velocity Supported

Kein Befehl wird ausgeführt, keine Rückmeldung der Velux Geräte zum FHEM.
Wo liegt der Fehler? Hat jemand eine Idee?
Das Login scheint sich FHEM zu merken, versuche ich es erneut kommt

Code Auswählen

2021.05.07 10:28:02.853 5: KLF200 (Velux) - Set login,
2021.05.07 10:28:02.856 5: KLF200 (Velux) GW_PASSWORD_ENTER_REQ,
2021.05.07 10:28:02.856 5: KLF200 Velux: unwrapped bytes     30003333724d707547546e5000000000000000000000000000000000000000000000,
2021.05.07 10:28:02.856 5: KLF200 Velux: wrapped bytes c0002330003333724d707547546e500000000000000000000000000000000000000000000004c0,
2021.05.07 10:28:02.857 5: SW: c0002330003333724d707547546e500000000000000000000000000000000000000000000004c0,
2021.05.07 10:28:02.869 5: KLF200 (Velux) - received: 300100,
2021.05.07 10:28:02.869 5: KLF200 (Velux) GW_PASSWORD_ENTER_CFM 3001 0,
2021.05.07 10:28:02.878 5: KLF200 Velux: unwrapped bytes     031200010101000000000000000000000000000000000000000000,
2021.05.07 10:28:02.878 5: KLF200 Velux: wrapped bytes c0001c0312000101010000000000000000000000000000000000000000000cc0,
2021.05.07 10:28:02.878 5: SW: c0001c0312000101010000000000000000000000000000000000000000000cc0,
2021.05.07 10:28:02.880 5: KLF200 (Velux) GW_REBOOT_REQ,
2021.05.07 10:28:02.963 5: KLF200 (Velux) - received: 000002,
2021.05.07 10:28:02.963 5: KLF200 (Velux) GW_ERROR_NTF 0000 2,
2021.05.07 10:28:02.967 1: KLF200 (Velux) - Gateway Error: ERROR on Frame Structure.,
2021.05.07 10:28:02.967 5: KLF200 (Velux) Dequeue: 031200010101000000000000000000000000000000000000000000,
2021.05.07 10:28:02.967 5: KLF200 (Velux) Dequeue: mached,
2021.05.07 10:28:02.971 5: KLF200 Velux: unwrapped bytes     031200020101000000000000000000000000000000000000000001,
2021.05.07 10:28:02.972 5: KLF200 Velux: wrapped bytes c0001c0312000201010000000000000000000000000000000000000000010ec0,
2021.05.07 10:28:02.972 5: SW: c0001c0312000201010000000000000000000000000000000000000000010ec0,
2021.05.07 10:28:03.130 5: KLF200 (Velux) - received: 0313000201,
2021.05.07 10:28:03.131 5: KLF200 (Velux) - ignored:  0313000201,
2021.05.07 10:28:03.132 5: KLF200 (Velux) - received: 03020001010100ffff001d10000000,
2021.05.07 10:28:03.132 5: Velux: dispatch \003\002\000\001\001\001\000��\000\035\020\000\000\000,
2021.05.07 10:28:03.132 5: KLF200Node (Velux) - received: 03020001010100ffff001d10000000,
2021.05.07 10:28:03.133 5: KLF200 (Velux) - received: 03040001,
2021.05.07 10:28:03.133 5: KLF200 (Velux) GW_SESSION_FINISHED_NTF 0304 1,
2021.05.07 10:28:03.133 5: KLF200 (Velux) Dequeue: regex = (?^:^(\x04\x12|\x03\x05|\x03\x12|\x03\x10)),
2021.05.07 10:28:03.134 5: KLF200 (Velux) Dequeue: SessionID = 1,
2021.05.07 10:28:03.134 5: KLF200 (Velux) Dequeue: 031200020101000000000000000000000000000000000000000001,

Der Fehler ist mir aufgefallen KLF200 (Velux) - Gateway Error: ERROR on Frame Structure.,
Habe gesucht und nichts gefunden.
Danke

buennerbernd · 19 Mai 2021, 22:25:16

Solche Hinweise sind für mich immer interessant. Momentan fehlt mir der Freiraum, das genau zu untersuchen. Ich werde aber versuchen zu verstehen, was da vor sich gegangen ist.

Viele Grüße,
Stefan.

grappa24 · 22 Juni 2021, 09:16:54

Ich hab gestern meine Powerline Verbindung (AVM) für mein KLF200 durch einen AVM Repeater 3000 ersetzt und hab seitdem laut Log genau alle 13 min Verbindungsabbrüche:

Code Auswählen

2021.06.22 03:32:32 1: KLF200 (Velux_Neu) - connectionBroken -> reboot started, reconnect in 30 seconds
2021.06.22 03:33:07 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 03:45:18 1: KLF200 (Velux_Neu) - connectionBroken -> closed connection
2021.06.22 03:45:18 1: KLF200 (Velux_Neu) - connectionBroken -> reopen connection in 5 seconds
2021.06.22 03:45:27 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 03:45:28 1: KLF200 (Velux_Neu) - connectionBroken -> reboot started, reconnect in 30 seconds
2021.06.22 03:46:03 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 03:58:14 1: KLF200 (Velux_Neu) - connectionBroken -> closed connection
2021.06.22 03:58:14 1: KLF200 (Velux_Neu) - connectionBroken -> reopen connection in 5 seconds
2021.06.22 03:58:23 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 03:58:23 1: KLF200 (Velux_Neu) - connectionBroken -> reboot started, reconnect in 30 seconds
2021.06.22 03:58:58 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 04:11:08 1: KLF200 (Velux_Neu) - connectionBroken -> closed connection
2021.06.22 04:11:08 1: KLF200 (Velux_Neu) - connectionBroken -> reopen connection in 5 seconds
2021.06.22 04:11:18 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 04:11:18 1: KLF200 (Velux_Neu) - connectionBroken -> reboot started, reconnect in 30 seconds
2021.06.22 04:11:53 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 04:24:04 1: KLF200 (Velux_Neu) - connectionBroken -> closed connection
2021.06.22 04:24:04 1: KLF200 (Velux_Neu) - connectionBroken -> reopen connection in 5 seconds
2021.06.22 04:24:13 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 04:24:14 1: KLF200 (Velux_Neu) - connectionBroken -> reboot started, reconnect in 30 seconds
2021.06.22 04:24:49 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 04:36:59 1: KLF200 (Velux_Neu) - connectionBroken -> closed connection
2021.06.22 04:36:59 1: KLF200 (Velux_Neu) - connectionBroken -> reopen connection in 5 seconds
2021.06.22 04:37:09 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 04:37:09 1: KLF200 (Velux_Neu) - connectionBroken -> reboot started, reconnect in 30 seconds
2021.06.22 04:37:44 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 04:49:56 1: KLF200 (Velux_Neu) - connectionBroken -> closed connection
2021.06.22 04:49:56 1: KLF200 (Velux_Neu) - connectionBroken -> reopen connection in 5 seconds
2021.06.22 04:50:05 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 04:50:05 1: KLF200 (Velux_Neu) - connectionBroken -> reboot started, reconnect in 30 seconds
2021.06.22 04:50:40 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 05:02:50 1: KLF200 (Velux_Neu) - connectionBroken -> closed connection
2021.06.22 05:02:50 1: KLF200 (Velux_Neu) - connectionBroken -> reopen connection in 5 seconds
2021.06.22 05:03:00 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 05:03:00 1: KLF200 (Velux_Neu) - connectionBroken -> reboot started, reconnect in 30 seconds
2021.06.22 05:03:35 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 05:15:46 1: KLF200 (Velux_Neu) - connectionBroken -> closed connection
2021.06.22 05:15:46 1: KLF200 (Velux_Neu) - connectionBroken -> reopen connection in 5 seconds
2021.06.22 05:15:55 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 05:15:55 1: KLF200 (Velux_Neu) - connectionBroken -> reboot started, reconnect in 30 seconds
2021.06.22 05:16:30 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 05:28:41 1: KLF200 (Velux_Neu) - connectionBroken -> closed connection
2021.06.22 05:28:41 1: KLF200 (Velux_Neu) - connectionBroken -> reopen connection in 5 seconds
2021.06.22 05:28:51 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 05:28:51 1: KLF200 (Velux_Neu) - connectionBroken -> reboot started, reconnect in 30 seconds
2021.06.22 05:29:26 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 05:41:37 1: KLF200 (Velux_Neu) - connectionBroken -> closed connection
2021.06.22 05:41:37 1: KLF200 (Velux_Neu) - connectionBroken -> reopen connection in 5 seconds
2021.06.22 05:41:46 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 05:41:47 1: KLF200 (Velux_Neu) - connectionBroken -> reboot started, reconnect in 30 seconds
2021.06.22 05:42:22 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 05:54:32 1: KLF200 (Velux_Neu) - connectionBroken -> closed connection
2021.06.22 05:54:32 1: KLF200 (Velux_Neu) - connectionBroken -> reopen connection in 5 seconds
2021.06.22 05:54:42 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 05:54:42 1: KLF200 (Velux_Neu) - connectionBroken -> reboot started, reconnect in 30 seconds
2021.06.22 05:55:17 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 06:07:28 1: KLF200 (Velux_Neu) - connectionBroken -> closed connection
2021.06.22 06:07:28 1: KLF200 (Velux_Neu) - connectionBroken -> reopen connection in 5 seconds
2021.06.22 06:07:38 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 06:07:38 1: KLF200 (Velux_Neu) - connectionBroken -> reboot started, reconnect in 30 seconds
2021.06.22 06:08:13 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 06:14:05 1: KLF200 (Velux_Neu) - connectionBroken -> closed connection
2021.06.22 06:14:05 1: KLF200 (Velux_Neu) - connectionBroken -> reopen connection in 5 seconds
2021.06.22 06:14:15 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 06:14:16 1: KLF200 (Velux_Neu) - connectionBroken -> reboot started, reconnect in 30 seconds
2021.06.22 06:14:51 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 06:20:05 3: FS20 set wz_ambilight off
2021.06.22 06:34:00 1: KLF200 (Velux_Neu) - connectionBroken -> closed connection
2021.06.22 06:34:00 1: KLF200 (Velux_Neu) - connectionBroken -> reopen connection in 5 seconds
2021.06.22 06:34:10 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 06:34:10 1: KLF200 (Velux_Neu) - connectionBroken -> reboot started, reconnect in 30 seconds
2021.06.22 06:34:45 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 06:46:56 1: KLF200 (Velux_Neu) - connectionBroken -> closed connection
2021.06.22 06:46:56 1: KLF200 (Velux_Neu) - connectionBroken -> reopen connection in 5 seconds
2021.06.22 06:47:05 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 06:47:06 1: KLF200 (Velux_Neu) - connectionBroken -> reboot started, reconnect in 30 seconds
2021.06.22 06:47:40 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 06:59:51 1: KLF200 (Velux_Neu) - connectionBroken -> closed connection
2021.06.22 06:59:51 1: KLF200 (Velux_Neu) - connectionBroken -> reopen connection in 5 seconds
2021.06.22 07:00:00 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 07:00:01 1: KLF200 (Velux_Neu) - connectionBroken -> reboot started, reconnect in 30 seconds
2021.06.22 07:00:36 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 07:05:42 3: LGTV_WebOS (lg_wz) - Sucessfull WS connection to 192.168.178.68
2021.06.22 07:06:55 2: ROOMMATE set rr_Heike absent
2021.06.22 07:32:49 1: KLF200 (Velux_Neu) - connectionBroken -> closed connection
2021.06.22 07:32:49 1: KLF200 (Velux_Neu) - connectionBroken -> reopen connection in 5 seconds
2021.06.22 07:32:58 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 07:32:59 1: KLF200 (Velux_Neu) - connectionBroken -> reboot started, reconnect in 30 seconds
2021.06.22 07:33:33 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 07:55:03 3: myAt21: Could not set power to off
2021.06.22 07:55:45 1: KLF200 (Velux_Neu) - connectionBroken -> closed connection
2021.06.22 07:55:45 1: KLF200 (Velux_Neu) - connectionBroken -> reopen connection in 5 seconds
2021.06.22 07:55:54 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 07:55:54 1: KLF200 (Velux_Neu) - connectionBroken -> reboot started, reconnect in 30 seconds
2021.06.22 07:56:29 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 08:06:17 3: CUL_HM set bd_rollo stop noArg
2021.06.22 08:18:11 1: KLF200 (Velux_Neu) - connectionBroken -> closed connection
2021.06.22 08:18:11 1: KLF200 (Velux_Neu) - connectionBroken -> reopen connection in 5 seconds
2021.06.22 08:18:21 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 08:18:21 1: KLF200 (Velux_Neu) - connectionBroken -> reboot started, reconnect in 30 seconds
2021.06.22 08:18:56 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 08:31:07 1: KLF200 (Velux_Neu) - connectionBroken -> closed connection
2021.06.22 08:31:07 1: KLF200 (Velux_Neu) - connectionBroken -> reopen connection in 5 seconds
2021.06.22 08:31:16 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 08:31:17 1: KLF200 (Velux_Neu) - connectionBroken -> reboot started, reconnect in 30 seconds
2021.06.22 08:31:52 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 08:44:03 1: KLF200 (Velux_Neu) - connectionBroken -> closed connection
2021.06.22 08:44:03 1: KLF200 (Velux_Neu) - connectionBroken -> reopen connection in 5 seconds
2021.06.22 08:44:12 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 08:44:12 1: KLF200 (Velux_Neu) - connectionBroken -> reboot started, reconnect in 30 seconds
2021.06.22 08:44:47 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 08:56:58 1: KLF200 (Velux_Neu) - connectionBroken -> closed connection
2021.06.22 08:56:58 1: KLF200 (Velux_Neu) - connectionBroken -> reopen connection in 5 seconds
2021.06.22 08:57:08 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 08:57:08 1: KLF200 (Velux_Neu) - connectionBroken -> reboot started, reconnect in 30 seconds
2021.06.22 08:57:43 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 09:09:54 1: KLF200 (Velux_Neu) - connectionBroken -> closed connection
2021.06.22 09:09:54 1: KLF200 (Velux_Neu) - connectionBroken -> reopen connection in 5 seconds
2021.06.22 09:10:03 1: 192.168.178.122:51200 reappeared (Velux_Neu)
2021.06.22 09:10:04 1: KLF200 (Velux_Neu) - connectionBroken -> reboot started, reconnect in 30 seconds
2021.06.22 09:10:39 1: 192.168.178.122:51200 reappeared (Velux_Neu)

Da die 5,4 GHz Verbindung zum Repeater schlecht war hab ich die Verbindung auf 2,4 GHz eingeschränkt, auch keine Verbesserung.

wobei die Readings völlig unverdächtig aussehen:

Code Auswählen

setstate Velux_Neu 2021-06-22 09:10:03 connectionBroken 0
setstate Velux_Neu 2021-06-22 09:10:39 connectionsAfterBoot 1