Nach Update & Neustart "SET: Unknown argument?"

[Ralf.E]

Moin,

nach einem Update und Neustart eben habe ich gerade folgende Meldung im Log gefunden und nicht wirklich eine Idee was die Ursache ist:

Code Auswählen Erweitern

2016.04.27 09:12:13 3: ZWave got config for fibaro/fgms.xml from ./FHEM/lib/openzwave_deviceconfig.xml.gz
2016.04.27 09:12:13 5: SET: Unknown argument ?, choose one of associationAdd associationDel basicSet basicValue configAmbientIlluminationLevelAbove83 configAmbientIlluminationLevelBelow82 configBASICOFFCommandFrameValue configBASICONCommandFrameValue configBasicCommandClassFrames12:onlyTheBASICONCommandFrameSentIn1,BASICONAndBASICOFFCommandFrames0,onlyTheBASICOFFCommandFrameSent2 configByte configDefault configIlluminationReportThreshold configIlluminationReportsInterval configIntervalOfTemperatureMeasuring configLEDBrightness configLEDIndicatingTamperAlarm:LEDIndicatesTamperAlarm,LEDDoesNotIndicateTamperAlarm configLEDSignalingMode:LongBlinkWhite,LongBlinkThenShortBlinksCyan,LongBlinkRed,LEDInactive,FlashlightModeLEDGlowsInWhite11,LongBlinkThen2ShortBlinksWhite,LongBlinkThen2ShortBlinksCyan,LongBlinkThen2ShortBlinksMagenta,LongBlinkThen2ShortBlinksGreen,LongBlinkThen2ShortBlinksRed,LongBlinkCyan,LongBlinkBlue,LongBlinkYellow,LongBlinkThenShortBlinkLEDColour10,LongBlinkThen2ShortBlinksYellow,LongBlinkThenShortBlinksWhite,LongBlinkThenShortBlinksYellow,LongBlinkThenShortBlinksRed,LongBlinkThenShortBlinksGreen,1LongBlinkLEDColourDependsOnThe1,LongBlinkThenShortBlinksBlue,LongBlinkGreen,LongBlinkThen2ShortBlinksBlue,FlashlightModeLEDGlowsInWhite2,LongBlinkThenShortBlinksMagenta,LongBlinkThen2ShortBlinksLED19,LongBlinkMagenta configLong configMaximumTemperatureResultingInRed87 configMinimumTemperatureResultingIn86 configMotionAlarmCancellationDelay configMotionSensorSBlindTime2 configMotionSensorSSensitivity configNightDay configPIRSensorOperatingMode:PIRSensorAlwaysActive,PIRSensorActiveDuringTheNight2,PIRSensorActiveDuringTheDayOnly configPIRSensorSPulseCounter:1Pulse,4Pulses,2Pulses,3Pulses configPIRSensorSWindowTime:16Seconds,8Seconds,4Seconds,12Seconds configTamperAlarmBroadcastMode:TamperAlarmSentInBroadcastMode,TamperAlarmIsNotSentInBroadcast0 configTamperAlarmCancellationDelay configTamperOperatingModes:Tamper,Vibration,TamperCancellation,TamperCancellationOrientation,TamperOrientation configTamperSensitivity configTemperatureOffset configTemperatureReportThreshold configTemperatureReportsInterval configWord mcaAdd mcaDel neighborUpdate:noArg wakeupInterval wakeupNoMoreInformation:noArg
Unknown argument ?, choose one of associationAdd associationDel configALARMFLASHINGAlarmTime configAutoOffForRelay1 configAutoOffForRelay2 configAutoOffRelayAfterSpecifiedTime:ManualOverrideEnabled,ManualOverrideDisabled configByte configDefault configDimmerRollerShutterControl:DisableDimmerRollerShutter0,EnableDimmerRollerShutterControl configEnableDisableALLONOFF:ALLONDisabledALLOFFActive,ALLONDisabledALLOFFDisabled,ALLONActiveALLOFFDisabled,ALLONActiveALLOFFActive configInputsBehaviour:Toggle,FollowSwitchContactClosedONOpenO1 configInputsButtonSwitchConfiguration:BiStableInputSwitch,MonoStableInputButton configLong configManagingTheTransmissionOfControl6:TheControlCommandsAreSentWhenThe1,TheControlCommandsAreSentWhenThe2,TheControlCommandsAreSentWhenThe0 configManagingTheTransmissionOfControl7:TheControlCommandsAreSentWhenThe1,TheControlCommandsAreSentWhenThe2,TheControlCommandsAreSentWhenThe0 configRelay1ResponseToGeneralAlarm:ALARMRELAYONRelayWillTurnONUpon1,DEACTIVATIONNoResponseToAlarm0,ALARMFLASHINGRelayWillTurnONAndO3,ALARMRELAYOFFRelayWillTurnOFF2 configRelay1ResponseToSmokeCOCO2Alarm:ALARMRELAYONRelayWillTurnONUpon1,DEACTIVATIONNoResponseToAlarm0,ALARMFLASHINGRelayWillTurnONAndO3,ALARMRELAYOFFRelayWillTurnOFF2 configRelay1ResponseToTemperatureAlarm:ALARMRELAYOFFRelayWillTurnOFF2,DEACTIVATIONNoResponseToAlarm0,ALARMFLASHINGRelayWillTurnONAndO3,ALARMRELAYONRelayWillTurnONUpon1 configRelay1ResponseToWaterFloodAlarm:ALARMRELAYONRelayWillTurnONUpon1,ALARMRELAYOFFRelayWillTurnOFF2,DEACTIVATIONNoResponseToAlarm0,ALARMFLASHINGRelayWillTurnONAndO3 configRelay2ResponseToGeneralAlarm:ALARMFLASHINGRelayWillTurnONAndO3,DEACTIVATIONNoResponseToAlarm0,ALARMRELAYOFFRelayWillTurnOFF2,ALARMRELAYONRelayWillTurnONUpon1 configRelay2ResponseToSmokeCOCO2Alarm:ALARMRELAYOFFRelayWillTurnOFF2,DEACTIVATIONNoResponseToAlarm0,ALARMFLASHINGRelayWillTurnONAndO3,ALARMRELAYONRelayWillTurnONUpon1 configRelay2ResponseToTemperatureAlarm:DEACTIVATIONNoResponseToAlarm0,ALARMFLASHINGRelayWillTurnONAndO3,ALARMRELAYOFFRelayWillTurnOFF2,ALARMRELAYONRelayWillTurnONUpon1 configRelay2ResponseToWaterFloodAlarm:ALARMFLASHINGRelayWillTurnONAndO3,DEACTIVATIONNoResponseToAlarm0,ALARMRELAYOFFRelayWillTurnOFF2,ALARMRELAYONRelayWillTurnONUpon1 configSavingStateBeforePowerFailure:StateSavedAtPowerFailureAll1,StateNOTSavedAtPowerFailureAll0 configWord mcCreateAll:noArg mcaAdd mcaDel neighborUpdate:noArg off:noArg on:noArg powerlevel powerlevelTest swaIncludeNone:noArg swaIncludeOff:noArg swaIncludeOn:noArg swaIncludeOnOff:noArg swaOff:noArg swaOn:noArg off-till-overnight blink on-till-overnight off-till intervals on-for-timer toggle on-till off-for-timer

Gehört die Meldung zum Laden der Config eines FGMS? Dummerweise habe ich davon 2 Stück am Laufen.

Dann habe ich in den Readings der beiden FGMS noch jeweils folgendes gesehen (UNPARSED ist aber auch bei anderen Z-Wave Devices zu sehen):

Code Auswählen Erweitern

UNPARSED SENSOR_BINARY 03300100
UNPARSED UNKNOWN_B1 06b105030a0000

Jemand eine Idee was die Ursache sein könnte?

Ralf

[rudolfkoenig]

Jemand eine Idee was die Ursache sein könnte?

Ja, verbose 5.
FHEMWEB fragt per ? die Liste der moeglichen Befehle ab, und das wird auf verbose 5 protokolliert.

[Ralf.E]

Ja, verbose 5.
FHEMWEB fragt per ? die Liste der moeglichen Befehle ab, und das wird auf verbose 5 protokolliert.

D.h. ein verbose 5 auf das FHEMWEB device reicht oder global?

Ralf

[Ralf.E]

Ja, verbose 5.
FHEMWEB fragt per ? die Liste der moeglichen Befehle ab, und das wird auf verbose 5 protokolliert.

Verbose 5 auf global und ein 'shutdown restart':

Code Auswählen Erweitern

2016.04.27 12:56:21 0: Server shutdown
2016.04.27 12:56:24 1: Including fhem.cfg
2016.04.27 12:56:24 3: telnetPort: port 7072 opened
2016.04.27 12:56:25 3: WEB: port 8083 opened
2016.04.27 12:56:25 3: WEBphone: port 8084 opened
2016.04.27 12:56:25 3: WEBtablet: port 8085 opened
2016.04.27 12:56:25 2: eventTypes: loaded 2351 events from ./log/eventTypes.txt
2016.04.27 12:56:25 3: Opening ZWAVE1 device /dev/ttyAMA0
2016.04.27 12:56:25 3: Setting ZWAVE1 serial parameters to 115200,8,N,1
2016.04.27 12:56:25 3: ZWAVE1 device opened
2016.04.27 12:56:28 3: WEBremote: port 8082 opened
2016.04.27 12:56:28 2: Registering GEOFANCY geofancy for URL /geo...
2016.04.27 12:56:28 3: Opening CUL_0 device /dev/ttyACM0
2016.04.27 12:56:28 3: Setting CUL_0 serial parameters to 9600,8,N,1
2016.04.27 12:56:28 3: CUL_0 device opened
2016.04.27 12:56:28 3: CUL_0: Possible commands: BbCFiAZEGMKUYRTVWXefmltux
2016.04.27 12:56:28 2: Switched CUL_0 rfmode to MAX
2016.04.27 12:56:28 3: CUL_MAX_Check: Detected firmware version 161 of the CUL-compatible IODev
splice on reference is experimental at ./FHEM/98_weekprofile.pm line 305.
splice on reference is experimental at ./FHEM/98_weekprofile.pm line 856.
2016.04.27 12:56:29 3: TABLETUI: new ext defined infix:ftui/: dir:./www/tablet:
2016.04.27 12:56:29 3: Registering HTTPSRV TABLETUI for URL /ftui   and assigned link ftui/ ...
2016.04.27 12:56:29 3: WEBftui: port 8086 opened
2016.04.27 12:56:30 3: AMAD (ku_Tablet) - defined with host 192.168.64.220 on port 8090 and AccessPoint-SSID WLAN-RPA2
2016.04.27 12:56:30 3: AMAD (AMADCommBridge) - defined Bridge with Socketport 8090
2016.04.27 12:56:30 3: AMAD (AMADCommBridge) - Attention!!! By the first run, dont forget to "set AMADCommBridge fhemServerIP <IP-FHEM>"
2016.04.27 12:56:30 3: AMADCommBridge: port 8090 opened
Smartmatch is experimental at ./FHEM/10_RESIDENTS.pm line 145, <$fh> line 1644.
Smartmatch is experimental at ./FHEM/10_RESIDENTS.pm line 146, <$fh> line 1644.
Smartmatch is experimental at ./FHEM/10_RESIDENTS.pm line 221, <$fh> line 1644.
Smartmatch is experimental at ./FHEM/20_ROOMMATE.pm line 220, <$fh> line 1651.
2016.04.27 12:56:30 1: Including ./log/fhem.save
2016.04.27 12:56:31 1: usb create starting
2016.04.27 12:56:31 1: usb create end
2016.04.27 12:56:31 3: wz_HarmonyHub: connected
2016.04.27 12:56:31 0: Featurelevel: 5.7
2016.04.27 12:56:31 0: Server started with 170 defined entities (fhem.pl:11308/2016-04-25 perl:5.020002 os:linux user:fhem pid:25542)
2016.04.27 12:56:31 2: ZWDongle_ProcessSendStack: no ACK, resending message 0107000301020100f9
2016.04.27 12:56:32 3: wz_HarmonyHub: new config
2016.04.27 12:56:48 1: PERL WARNING: Use of uninitialized value in hash element at ./FHEM/74_AMAD.pm line 144.
2016.04.27 13:00:13 3: ZWave got config for fibaro/fgr222.xml from ./FHEM/lib/fhem_zwave_deviceconfig.xml.gz
2016.04.27 13:00:17 3: ZWave got config for fibaro/fgms.xml from ./FHEM/lib/openzwave_deviceconfig.xml.gz
2016.04.27 13:00:19 3: ZWave got config for fibaro/fgwpe.xml from ./FHEM/lib/openzwave_deviceconfig.xml.gz
2016.04.27 13:00:21 3: ZWave got config for fibaro/fgs222.xml from ./FHEM/lib/openzwave_deviceconfig.xml.gz
2016.04.27 13:00:21 5: SET: Unknown argument ?, choose one of associationAdd associationDel basicSet basicValue configAmbientIlluminationLevelAbove83 configAmbientIlluminationLevelBelow82 configBASICOFFCommandFrameValue configBASICONCommandFrameValue configBasicCommandClassFrames12:onlyTheBASICONCommandFrameSentIn1,onlyTheBASICOFFCommandFrameSent2,BASICONAndBASICOFFCommandFrames0 configByte configDefault configIlluminationReportThreshold configIlluminationReportsInterval configIntervalOfTemperatureMeasuring configLEDBrightness configLEDIndicatingTamperAlarm:LEDDoesNotIndicateTamperAlarm,LEDIndicatesTamperAlarm configLEDSignalingMode:LongBlinkThenShortBlinkLEDColour10,1LongBlinkLEDColourDependsOnThe1,LongBlinkThenShortBlinksCyan,FlashlightModeLEDGlowsInWhite2,FlashlightModeLEDGlowsInWhite11,LongBlinkGreen,LongBlinkThenShortBlinksGreen,LongBlinkThen2ShortBlinksGreen,LongBlinkThen2ShortBlinksLED19,LongBlinkCyan,LongBlinkThen2ShortBlinksCyan,LongBlinkBlue,LongBlinkThenShortBlinksBlue,LongBlinkThen2ShortBlinksMagenta,LongBlinkThen2ShortBlinksYellow,LongBlinkWhite,LongBlinkThenShortBlinksYellow,LongBlinkThenShortBlinksMagenta,LongBlinkThen2ShortBlinksWhite,LEDInactive,LongBlinkMagenta,LongBlinkThen2ShortBlinksBlue,LongBlinkThen2ShortBlinksRed,LongBlinkYellow,LongBlinkThenShortBlinksWhite,LongBlinkRed,LongBlinkThenShortBlinksRed configLong configMaximumTemperatureResultingInRed87 configMinimumTemperatureResultingIn86 configMotionAlarmCancellationDelay configMotionSensorSBlindTime2 configMotionSensorSSensitivity configNightDay configPIRSensorOperatingMode:PIRSensorAlwaysActive,PIRSensorActiveDuringTheNight2,PIRSensorActiveDuringTheDayOnly configPIRSensorSPulseCounter:4Pulses,2Pulses,1Pulse,3Pulses configPIRSensorSWindowTime:16Seconds,4Seconds,12Seconds,8Seconds configTamperAlarmBroadcastMode:TamperAlarmIsNotSentInBroadcast0,TamperAlarmSentInBroadcastMode configTamperAlarmCancellationDelay configTamperOperatingModes:Vibration,TamperCancellation,TamperCancellationOrientation,TamperOrientation,Tamper configTamperSensitivity configTemperatureOffset configTemperatureReportThreshold configTemperatureReportsInterval configWord mcaAdd mcaDel neighborUpdate:noArg wakeupInterval wakeupNoMoreInformation:noArg
Unknown argument ?, choose one of associationAdd associationDel configALARMFLASHINGAlarmTime configAutoOffForRelay1 configAutoOffForRelay2 configAutoOffRelayAfterSpecifiedTime:ManualOverrideDisabled,ManualOverrideEnabled configByte configDefault configDimmerRollerShutterControl:EnableDimmerRollerShutterControl,DisableDimmerRollerShutter0 configEnableDisableALLONOFF:ALLONActiveALLOFFActive,ALLONActiveALLOFFDisabled,ALLONDisabledALLOFFActive,ALLONDisabledALLOFFDisabled configInputsBehaviour:Toggle,FollowSwitchContactClosedONOpenO1 configInputsButtonSwitchConfiguration:MonoStableInputButton,BiStableInputSwitch configLong configManagingTheTransmissionOfControl6:TheControlCommandsAreSentWhenThe0,TheControlCommandsAreSentWhenThe1,TheControlCommandsAreSentWhenThe2 configManagingTheTransmissionOfControl7:TheControlCommandsAreSentWhenThe2,TheControlCommandsAreSentWhenThe1,TheControlCommandsAreSentWhenThe0 configRelay1ResponseToGeneralAlarm:ALARMRELAYOFFRelayWillTurnOFF2,ALARMRELAYONRelayWillTurnONUpon1,ALARMFLASHINGRelayWillTurnONAndO3,DEACTIVATIONNoResponseToAlarm0 configRelay1ResponseToSmokeCOCO2Alarm:ALARMRELAYONRelayWillTurnONUpon1,ALARMFLASHINGRelayWillTurnONAndO3,ALARMRELAYOFFRelayWillTurnOFF2,DEACTIVATIONNoResponseToAlarm0 configRelay1ResponseToTemperatureAlarm:DEACTIVATIONNoResponseToAlarm0,ALARMRELAYOFFRelayWillTurnOFF2,ALARMRELAYONRelayWillTurnONUpon1,ALARMFLASHINGRelayWillTurnONAndO3 configRelay1ResponseToWaterFloodAlarm:ALARMRELAYONRelayWillTurnONUpon1,ALARMFLASHINGRelayWillTurnONAndO3,ALARMRELAYOFFRelayWillTurnOFF2,DEACTIVATIONNoResponseToAlarm0 configRelay2ResponseToGeneralAlarm:DEACTIVATIONNoResponseToAlarm0,ALARMRELAYONRelayWillTurnONUpon1,ALARMFLASHINGRelayWillTurnONAndO3,ALARMRELAYOFFRelayWillTurnOFF2 configRelay2ResponseToSmokeCOCO2Alarm:ALARMRELAYOFFRelayWillTurnOFF2,ALARMRELAYONRelayWillTurnONUpon1,ALARMFLASHINGRelayWillTurnONAndO3,DEACTIVATIONNoResponseToAlarm0 configRelay2ResponseToTemperatureAlarm:ALARMRELAYONRelayWillTurnONUpon1,ALARMFLASHINGRelayWillTurnONAndO3,ALARMRELAYOFFRelayWillTurnOFF2,DEACTIVATIONNoResponseToAlarm0 configRelay2ResponseToWaterFloodAlarm:ALARMRELAYONRelayWillTurnONUpon1,ALARMFLASHINGRelayWillTurnONAndO3,ALARMRELAYOFFRelayWillTurnOFF2,DEACTIVATIONNoResponseToAlarm0 configSavingStateBeforePowerFailure:StateNOTSavedAtPowerFailureAll0,StateSavedAtPowerFailureAll1 configWord mcCreateAll:noArg mcaAdd mcaDel neighborUpdate:noArg off:noArg on:noArg powerlevel powerlevelTest swaIncludeNone:noArg swaIncludeOff:noArg swaIncludeOn:noArg swaIncludeOnOff:noArg swaOff:noArg swaOn:noArg on-till-overnight toggle on-till on-for-timer off-till-overnight off-for-timer off-till intervals blink
2016.04.27 13:00:26 4: name: /fhem?detail=WEB / RL:3475 / text/html; charset=UTF-8 / Content-Encoding: gzip
/
2016.04.27 13:00:42 5: Triggering global (1 changes)
2016.04.27 13:00:42 5: Starting notify loop for global, first event ATTR global verbose 5
2016.04.27 13:00:42 4: Connection closed for WEBremote_127.0.0.1_59200: EOF
2016.04.27 13:00:42 4: Connection closed for WEBremote_127.0.0.1_59193: EOF
2016.04.27 13:00:42 4: Connection closed for WEBremote_127.0.0.1_59203: EOF
2016.04.27 13:00:42 4: Connection closed for WEBremote_127.0.0.1_59186: EOF
2016.04.27 13:00:42 4: WEBremote_127.0.0.1_59211 GET /fhem?detail=global&fw_id=; BUFLEN:0
2016.04.27 13:00:42 4: name: /fhem?detail=global&fw_id= / RL:3558 / text/html; charset=UTF-8 / Content-Encoding: gzip
/
2016.04.27 13:00:43 4: WEBremote_127.0.0.1_59211 GET /fhem?cmd={AttrVal(%22global%22,%22room%22,%22%22)}&XHR=1; BUFLEN:0
2016.04.27 13:00:43 5: Cmd: >{AttrVal("global","room","")}<
2016.04.27 13:00:43 4: name: /fhem?cmd={AttrVal(%22global%22,%22room%22,%22%22)}&XHR=1 / RL:21 / text/plain; charset=UTF-8 / Content-Encoding: gzip
/
2016.04.27 13:00:43 4: WEBremote_127.0.0.1_59211 GET /fhem?XHR=1&inform=type=status;filter=global;since=1461754841;fmt=JSON&fw_id=206×tamp=1461754797769; BUFLEN:0
2016.04.27 13:00:43 4: Connection closed for WEBremote_127.0.0.1_59197: EOF


Und ein <list> zumindest der beiden MotionSensors:

Code Auswählen Erweitern

Internals:
   DEF        deefb60e 20
   IODev      ZWAVE1
   NAME       ku_MotionTablet
   NR         138
   STATE      closed
   TYPE       ZWave
   homeId     deefb60e
   nodeIdHex  14
   Readings:
     2016-03-15 17:04:25   CMD             ZW_APPLICATION_UPDATE
     2016-03-15 16:59:18   SECURITY        DISABLED (SECURITY not supported by device)
     2016-04-24 19:46:40   UNPARSED        SENSOR_BINARY 03300100
     2016-04-24 18:42:03   alarm_type_00   level ff node 14 seconds 0
     2016-03-15 17:14:54   assocGroup_1    Max 5 Nodes ZWAVE1
     2016-03-15 17:14:54   assocGroup_2    Max 5 Nodes
     2016-03-15 17:14:54   assocGroup_3    Max 1 Nodes ZWAVE1
     2016-03-15 17:14:54   assocGroups     3
     2016-04-21 06:18:33   basicReport     ff
     2016-04-27 08:35:07   basicSet        00
     2016-04-26 12:59:10   battery         100 %
     2016-04-05 22:45:01   configAmbientIlluminationLevelAbove83 1000
     2016-04-05 22:45:01   configAmbientIlluminationLevelBelow82 100
     2016-04-05 22:45:01   configBASICOFFCommandFrameValue 0
     2016-04-05 22:45:02   configBASICONCommandFrameValue 255
     2016-04-05 22:45:02   configBasicCommandClassFrames12 BASICONAndBASICOFFCommandFrames0
     2016-04-05 22:45:02   configIlluminationReportThreshold 200
     2016-04-05 22:45:02   configIlluminationReportsInterval 0
     2016-04-05 22:45:02   configIntervalOfTemperatureMeasuring 900
     2016-04-05 22:45:03   configLEDBrightness 10
     2016-04-05 22:45:03   configLEDIndicatingTamperAlarm LEDIndicatesTamperAlarm
     2016-04-05 22:45:03   configLEDSignalingMode LEDInactive
     2016-04-05 22:45:03   configMaximumTemperatureResultingInRed87 28
     2016-04-05 22:45:03   configMinimumTemperatureResultingIn86 18
     2016-04-05 22:45:03   configMotionAlarmCancellationDelay 30
     2016-04-05 22:45:04   configMotionSensorSBlindTime2 15
     2016-04-05 22:45:04   configMotionSensorSSensitivity 10
     2016-04-05 22:45:04   configNightDay  200
     2016-04-05 22:45:04   configPIRSensorOperatingMode PIRSensorAlwaysActive
     2016-04-05 22:45:04   configPIRSensorSPulseCounter 1
     2016-04-05 22:45:05   configPIRSensorSWindowTime 2
     2016-04-05 22:45:05   configTamperAlarmBroadcastMode TamperAlarmIsNotSentInBroadcast0
     2016-04-05 22:45:05   configTamperAlarmCancellationDelay 30
     2016-04-05 22:45:05   configTamperOperatingModes Tamper
     2016-04-05 22:45:05   configTamperSensitivity 15
     2016-04-05 22:45:05   configTemperatureOffset 0
     2016-04-05 22:45:06   configTemperatureReportThreshold 10
     2016-04-05 22:45:06   configTemperatureReportsInterval 0
     2016-04-24 13:23:20   luminance       25 Lux
     2016-03-15 16:59:22   model           FIBARO System FGMS001 Motion Sensor
     2016-03-15 16:59:22   modelConfig     fibaro/fgms.xml
     2016-03-15 16:59:22   modelId         010f-0800-1001
     2016-03-24 15:53:04   neighborList    cp_MotionSensor wz_JalousieFenster wz_JalousieTuer wz_PlugTablet
     2016-04-27 08:35:07   reportedState   closed
     2016-04-27 08:35:07   state           closed
     2016-04-27 00:43:41   temperature     18.8 C
     2016-04-27 12:58:23   transmit        OK
     2016-04-27 12:58:21   wakeup          notification
     2016-03-23 23:01:09   wakeupReport    interval 3600 target 1
Attributes:
   IODev      ZWAVE1
   classes    SENSOR_BINARY WAKE_UP ASSOCIATION BATTERY MULTI_CMD CRC_16_ENCAP MANUFACTURER_SPECIFIC VERSION CONFIGURATION MULTI_CHANNEL_ASSOCIATION SENSOR_MULTILEVEL SENSOR_ALARM BASIC
   devStateIcon closed:people_sensor@lightgrey open:people_sensor@red
   group      Küche
   icon       people_sensor@grey
   room       Küche,System,ZWave
   stateFormat reportedState

Code Auswählen Erweitern

Internals:
   CHANGED
   DEF        deefb60e 3
   IODev      ZWAVE1
   LASTInputDev ZWAVE1
   MSGCNT     1
   NAME       tr_MotionSensor
   NR         21
   STATE      closed
   TYPE       ZWave
   ZWAVE1_MSGCNT 1
   ZWAVE1_RAWMSG 0004000306310501220043
   ZWAVE1_TIME 2016-04-27 13:04:59
   homeId     deefb60e
   isWakeUp   1
   nodeIdHex  03
   Readings:
     2016-01-26 19:35:26   CMD             ZW_APPLICATION_UPDATE
     2016-01-24 13:57:13   SECURITY        DISABLED (SECURITY not supported by device)
     2016-04-27 04:38:15   UNPARSED        UNKNOWN_B1 06b105030a0000
     2016-04-19 12:31:31   alarm_type_00   level ff node 03 seconds 0
     2016-02-06 16:01:50   alarm_type_02   level fd node 03 seconds 0
     2016-01-26 19:57:21   assocGroup_1    Max 5 Nodes ZWAVE1
     2016-01-26 19:57:22   assocGroup_2    Max 5 Nodes
     2016-01-26 19:57:23   assocGroup_3    Max 1 Nodes ZWAVE1
     2016-01-26 19:57:20   assocGroups     3
     2016-04-27 08:09:50   basicSet        00
     2016-04-27 12:19:09   battery         100 %
     2016-02-16 19:36:37   closed          0
     2016-03-10 13:08:55   configAmbientIlluminationLevelAbove83 1000
     2016-03-10 13:08:55   configAmbientIlluminationLevelBelow82 100
     2016-03-10 13:08:55   configBASICOFFCommandFrameValue 0
     2016-03-10 13:08:55   configBASICONCommandFrameValue 255
     2016-03-10 13:08:55   configBasicCommandClassFrames12 BASICONAndBASICOFFCommandFrames0
     2016-03-10 13:08:56   configIlluminationReportThreshold 200
     2016-03-10 13:08:56   configIlluminationReportsInterval 3600
     2016-03-10 13:08:56   configIntervalOfTemperatureMeasuring 900
     2016-03-10 13:08:56   configLEDBrightness 10
     2016-03-10 13:08:56   configLEDIndicatingTamperAlarm LEDIndicatesTamperAlarm
     2016-03-10 13:08:56   configLEDSignalingMode LEDInactive
     2016-03-10 13:08:57   configMaximumTemperatureResultingInRed87 28
     2016-03-10 13:08:57   configMinimumTemperatureResultingIn86 18
     2016-03-10 13:08:57   configMotionAlarmCancellationDelay 30
     2016-03-10 13:08:57   configMotionSensorSBlindTime2 15
     2016-03-10 13:08:57   configMotionSensorSSensitivity 20
     2016-03-10 13:08:58   configNightDay  200
     2016-03-10 13:08:58   configPIRSensorOperatingMode PIRSensorActiveDuringTheNight2
     2016-03-10 13:08:58   configPIRSensorSPulseCounter 1
     2016-03-10 13:08:58   configPIRSensorSWindowTime 2
     2016-03-10 13:08:58   configTamperAlarmBroadcastMode TamperAlarmIsNotSentInBroadcast0
     2016-03-10 13:08:58   configTamperAlarmCancellationDelay 30
     2016-03-10 13:08:59   configTamperOperatingModes Tamper
     2016-03-10 13:08:59   configTamperSensitivity 15
     2016-03-10 13:08:59   configTemperatureOffset 65530
     2016-03-10 13:08:59   configTemperatureReportThreshold 10
     2016-03-10 13:08:59   configTemperatureReportsInterval 3600
     2016-03-20 11:29:42   direction       1671
     2016-04-27 12:58:06   luminance       216 Lux
     2016-01-26 20:07:25   mcaSupportedGroupings 2
     2016-01-24 13:57:15   model           FIBARO System FGMS001 Motion Sensor
     2016-01-24 13:57:15   modelConfig     fibaro/fgms.xml
     2016-01-24 13:57:15   modelId         010f-0800-1001
     2016-03-02 21:07:23   neighborList    ZWAVE1 tr_Device_FGS222
     2016-02-16 19:19:48   open            0
     2016-04-27 08:09:49   reportedState   closed
     2016-04-27 08:09:49   state           closed
     2016-04-08 13:07:50   tankCapacity    1197 cbm
     2016-04-27 13:04:59   temperature     6.7 C
     2016-04-27 12:19:11   transmit        OK
     2016-04-27 12:19:09   wakeup          notification
     2016-03-23 10:00:05   wakeupReport    interval 3600 target 1
Attributes:
   IODev      ZWAVE1
   classes    SENSOR_BINARY WAKE_UP ASSOCIATION BATTERY MULTI_CMD CRC_16_ENCAP MANUFACTURER_SPECIFIC VERSION CONFIGURATION MULTI_CHANNEL_ASSOCIATION SENSOR_MULTILEVEL SENSOR_ALARM BASIC
   devStateIcon closed:people_sensor@lightgrey open:people_sensor@red
   event-on-change-reading state
   group      Terasse
   icon       people_sensor
   motion     tr_st_Motion
   motion_map reportedState:opened:on reportedState:closed:off
   room       Terasse,ZWave
   sortby     2
   stateFormat reportedState
   userattr   motion motion_map structexclude
   verbose    5

Bei letzterem fällt mir gerade auf, das "event-on-change-reading state,reportedState" verschwunden ist - hatte ich gestern Abend noch bei diesem und einem anderen Device gesetzt?!?

[Ralf.E]

Bei letzterem fällt mir gerade auf, das "event-on-change-reading state,reportedState" verschwunden ist - hatte ich gestern Abend noch bei diesem und einem anderen Device gesetzt?!?

Spannend. In fhem.cfg steht es vor dem restart noch drin. Nach dem restart wird es via "list <device>" nicht mehr angezeigt. Konfiguration nochmal speichern und in fhem.cfg steht nur noch "event-on-change-reading state"...

Ralf

[Ralf.E]

Spannend. In fhem.cfg steht es vor dem restart noch drin. Nach dem restart wird es via "list <device>" nicht mehr angezeigt. Konfiguration nochmal speichern und in fhem.cfg steht nur noch "event-on-change-reading state"...

Das wurde bis eben schon etwas schräg. Aus 2 Z-Wave Devices bin ich die Attribute

Code Auswählen Erweitern

event-on-change-reading state
verbose    5

nicht losgeworden. Gelöscht, gespeichert und Neustart. Die beiden Attribute waren immer wieder da. In fhem.cfg und fhem.save war nichts zu finden.

Letztendlich kommen diese beiden Attribute von einer Structure - es waren nur die beiden in der Structure angegebenen Devices betroffen:

Code Auswählen Erweitern

Internals:
   ATTR       motion
   DEF        motion tr_MotionSensor cp_MotionSensor
   NAME       tr_st_Motion
   NR         175
   NTFY_ORDER 50-tr_st_Motion
   STATE      off
   TYPE       structure
   Content:
     cp_MotionSensor 1
     tr_MotionSensor 1
   Readings:
     2016-04-27 19:43:05   LastDevice      tr_MotionSensor
     2016-04-27 19:43:05   LastDevice_Abs  tr_MotionSensor
     2016-04-27 19:43:05   state           off
Attributes:
   clientstate_behavior relative
   clientstate_priority on off
   devStateIcon off:people_sensor@lightgrey on:people_sensor@tomato
   event-on-change-reading state
   group      Terasse
   icon       it_network
   room       Terasse
   sortby     2
   verbose    5
   webCmd     :

Wie auch immer sind die Attribute automatisch von der Structure an die eingetragenen Devices übertragen worden. Zusätzlich zu "event-on-change-reading" und "verbose" auch noch das Attribute "sortby". Ist das so beabsichtigt?

Das in meinem Eingangspost erwähnte "SET: Unknown argument ?" ist nach Anpassung der Structure noch nicht wieder aufgetreten.

Ralf