Neueste Beiträge

#91

Solaranlagen / Aw: 76_SolarForecast - Informa...

Letzter Beitrag von hazelnut - 17 April 2024, 23:26:13

Hi,

Illegal division by zero at ./FHEM/76_SolarForecast.pm line 8206.

Die mögliche "Devsion by zero" habe ich nun abgefangen bzw. prüfe nun auch eine fehlerhafte Definition des Schüssels cap.
Die V ist eingecheckt und morgen früh im Update. Die V liegt auch in meinem contrib für Eilige.

So, Update ist durch ...

Code Auswählen Erweitern

Internals:
   FUUID      65eaf512-f33f-4c82-2174-7dc6bc03d704f24c
   FVERSION   76_SolarForecast.pm:v1.17.8-s28799/2024-04-16
   MODE       Automatic - next Cycletime: 23:14:56
   MODEL      DWD
   NAME       PV_Forecast
   NR         75
   NTFY_ORDER 50-PV_Forecast
   STATE      updated
   TYPE       SolarForecast
   eventCount 4
   HELPER:
     FW         WEB
     PACKAGE    FHEM::SolarForecast
     SPGDETAIL 
     SPGDEV     PV_Forecast
     SPGROOM   
     VERSION    1.17.8
     VERSION_API unused
     VERSION_CTZ 1.0.0
     VERSION_ErrCodes unused
     VERSION_SMUtils 1.27.2
...
Die Auslastung vom Pi hält sich in Grenzen ...

Code Auswählen Erweitern

average: 0.16, 0.18, 0.18
... und in der Logdatei steht:

Code Auswählen Erweitern

...
2024.04.17 23:12:36 1: PV_Forecast DEBUG> SoC calc Step1 - compare with SoC history -> new Target: 55 %
2024.04.17 23:12:36 1: PV_Forecast DEBUG> SoC calc Step2 - note remaining days until care SoC (20 days) -> Target: 55 %
2024.04.17 23:12:36 1: PV_Forecast DEBUG> SoC calc Step3 - note charging probability -> Target: -279 % (new target < current Target SoC 60)
2024.04.17 23:12:36 1: PV_Forecast DEBUG> SoC calc Step4 - observe low/up limits -> Target: 60 %
2024.04.17 23:12:36 1: PV_Forecast DEBUG> SoC calc Step5 - rounding the SoC to steps of 5 -> Target: 60 %
2024.04.17 23:12:36 1: PV_Forecast DEBUG> SoC calc Step6 - force charging request: no (Battery is sufficiently charged)
2024.04.17 23:13:47 1: PV_Forecast DEBUG> SoC calc Step1 - compare with SoC history -> new Target: 55 %
2024.04.17 23:13:47 1: PV_Forecast DEBUG> SoC calc Step2 - note remaining days until care SoC (20 days) -> Target: 55 %
2024.04.17 23:13:47 1: PV_Forecast DEBUG> SoC calc Step3 - note charging probability -> Target: -279 % (new target < current Target SoC 60)
2024.04.17 23:13:47 1: PV_Forecast DEBUG> SoC calc Step4 - observe low/up limits -> Target: 60 %
2024.04.17 23:13:47 1: PV_Forecast DEBUG> SoC calc Step5 - rounding the SoC to steps of 5 -> Target: 60 %
2024.04.17 23:13:47 1: PV_Forecast DEBUG> SoC calc Step6 - force charging request: no (Battery is sufficiently charged)
2024.04.17 23:14:58 1: PV_Forecast DEBUG> SoC calc Step1 - compare with SoC history -> new Target: 55 %
2024.04.17 23:14:58 1: PV_Forecast DEBUG> SoC calc Step2 - note remaining days until care SoC (20 days) -> Target: 55 %
2024.04.17 23:14:58 1: PV_Forecast DEBUG> SoC calc Step3 - note charging probability -> Target: -279 % (new target < current Target SoC 60)
2024.04.17 23:14:58 1: PV_Forecast DEBUG> SoC calc Step4 - observe low/up limits -> Target: 60 %
2024.04.17 23:14:58 1: PV_Forecast DEBUG> SoC calc Step5 - rounding the SoC to steps of 5 -> Target: 60 %
2024.04.17 23:14:58 1: PV_Forecast DEBUG> SoC calc Step6 - force charging request: no (Battery is sufficiently charged)
2024.04.17 23:16:08 1: PV_Forecast DEBUG> SoC calc Step1 - compare with SoC history -> new Target: 55 %
2024.04.17 23:16:08 1: PV_Forecast DEBUG> SoC calc Step2 - note remaining days until care SoC (20 days) -> Target: 55 %
2024.04.17 23:16:08 1: PV_Forecast DEBUG> SoC calc Step3 - note charging probability -> Target: -279 % (new target < current Target SoC 60)
2024.04.17 23:16:08 1: PV_Forecast DEBUG> SoC calc Step4 - observe low/up limits -> Target: 60 %
2024.04.17 23:16:08 1: PV_Forecast DEBUG> SoC calc Step5 - rounding the SoC to steps of 5 -> Target: 60 %
2024.04.17 23:16:08 1: PV_Forecast DEBUG> SoC calc Step6 - force charging request: no (Battery is sufficiently charged)
2024.04.17 23:17:19 1: PV_Forecast DEBUG> SoC calc Step1 - compare with SoC history -> new Target: 55 %
2024.04.17 23:17:19 1: PV_Forecast DEBUG> SoC calc Step2 - note remaining days until care SoC (20 days) -> Target: 55 %
2024.04.17 23:17:19 1: PV_Forecast DEBUG> SoC calc Step3 - note charging probability -> Target: -279 % (new target < current Target SoC 60)
2024.04.17 23:17:19 1: PV_Forecast DEBUG> SoC calc Step4 - observe low/up limits -> Target: 60 %
2024.04.17 23:17:19 1: PV_Forecast DEBUG> SoC calc Step5 - rounding the SoC to steps of 5 -> Target: 60 %
2024.04.17 23:17:19 1: PV_Forecast DEBUG> SoC calc Step6 - force charging request: no (Battery is sufficiently charged)
2024.04.17 23:18:30 1: PV_Forecast DEBUG> SoC calc Step1 - compare with SoC history -> new Target: 55 %
2024.04.17 23:18:30 1: PV_Forecast DEBUG> SoC calc Step2 - note remaining days until care SoC (20 days) -> Target: 55 %
2024.04.17 23:18:30 1: PV_Forecast DEBUG> SoC calc Step3 - note charging probability -> Target: -279 % (new target < current Target SoC 60)
2024.04.17 23:18:30 1: PV_Forecast DEBUG> SoC calc Step4 - observe low/up limits -> Target: 60 %
2024.04.17 23:18:30 1: PV_Forecast DEBUG> SoC calc Step5 - rounding the SoC to steps of 5 -> Target: 60 %
2024.04.17 23:18:30 1: PV_Forecast DEBUG> SoC calc Step6 - force charging request: no (Battery is sufficiently charged)...
Der Bauch sagt ... dass das so aussehen könnte

Dann werde ich das mal die Tage beobachten und schauen, wie ich am sinnvollsten weitermache.

Dir erst einmal vielen Dank und ich hoffe die Infos helfen dir.

Gutes Nächtle

Hazel

#92

Solaranlagen / Aw: 76_SolarForecast - Informa...

Letzter Beitrag von DS_Starter - 17 April 2024, 23:12:39

Was ich aktuelle sehe ist dass jede 1-2 Sekunden ein Schaltbefehl ausgeführt wird:

2024.04.16 10:38:27 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:27 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:27 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:38:29 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:38:29 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:38:29 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:38:29 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:38:29 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:38:29 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:29 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:29 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:38:30 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:38:30 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:38:30 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:38:30 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:38:30 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:38:30 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)

Erkannt wird der Status nicht.
Wie steht dein Attribut ctrlInterval?

[Revision 28804: 76_SolarForecast: possible Illegal division by zero if Battery SOC ...]

#93

FHEM Code changes / Revision 28804: 76_SolarForeca...

Letzter Beitrag von System - 17 April 2024, 22:50:23

Revision 28804: 76_SolarForecast: possible Illegal division by zero if Battery SOC ...

76_SolarForecast: possible Illegal division by zero if Battery SOC management is activated

Source: Revision 28804: 76_SolarForecast: possible Illegal division by zero if Battery SOC ...

#94

Server - Linux / Aw: fhem-docker Image 4.0.0 (T...

Letzter Beitrag von frinkenstein - 17 April 2024, 22:46:31

Hallo Sidey,

hab es auf ein Netzwerkproblem eingrenzen können - Ausgangspunkt war die Loginfo :
21:24:26 conmon: /entry.sh: line 823: DOCKER_GW: unbound variable
21:24:26 conmon: INFO: Patching /etc/hosts file with DOCKER_HOST and DOCKER_GW'

bis zur beta2 einschl. startet das dockerimage mit der podman option --net=host
sauber durch und ist mit localhost:8083 erreichbar

mit der beta8 und aktuellen dev müssen stattdessen mit dem podman start die docker parameter -e DOCKER_HOST= -e DOCKER_GW=
angeben werden um dann die cni-podman0 Netzwerkbrücke auf 10.88.0.1 und nach jedem Container-neustart hochzählend die hostip 10.88.0.x
(automatisch vergeben) zu erhalten und Zugang auf den dann durchgestarteten Container auf :8083 zu bekommen - echt unglücklich
und mit meinem Versuch und Irrtum-Wissen häng ich fest - da ein Blick von dir/euch drauf wär nett -
für heute ist erst mal schluss..

Grüße
frink

#95

Anfängerfragen / Aw: Steuerbares (Aussen-)Wasse...

Letzter Beitrag von Bison - 17 April 2024, 22:37:42

Hi Bison

Hallo Cs-Online,
ich habe das mit Ventilen aus dem Internet (5€) und etwas Material aus dem Baumarkt gebaut. Ich steuere das ganze mit einer 8er Relaiskarte über das Modul HM-MOD-RE-8.

Empfehlung: Mach einen schönen Kasten drüber und sprühe alles mit Silikonöl ein, damit dir die Teile nicht innerhalb von 2 Jahren wegrotten.

Gruß
    Sailor

Hallo Sailor,

die laufen jetzt das dritte Jahr bei mir. Sie sind allerdings nicht im Gewächshaus, sonder im Schuppen nebenan (trocken).

Gruß Bison

#96

Solaranlagen / Aw: 76_SolarForecast - Informa...

Letzter Beitrag von Bison - 17 April 2024, 22:31:01

Hallo Heiko,

ich habe heute einen Debug auf consumerswitching gemacht um heraus zu bekommen weshalb ich alle 4 Sec. einen Schaltbefehl generiere. Kannst du mal drüber schauen wo der Fehler sein könnte?

Wenn du noch weitere Info brauchst lass es mich wissen.

Code Auswählen Erweitern

2024.04.16 10:38:27 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:27 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:27 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:38:29 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:38:29 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:38:29 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:38:29 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:38:29 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:38:29 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:29 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:29 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:38:30 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:38:30 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:38:30 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:38:30 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:38:30 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:38:30 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:30 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:30 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:38:31 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:38:31 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:38:31 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:38:31 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:38:31 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:38:31 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:31 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:31 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:38:32 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:38:32 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:38:32 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:38:32 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:38:32 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:38:32 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:32 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:32 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:38:33 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:38:33 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:38:33 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:38:33 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:38:33 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:38:33 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:33 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:33 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:38:34 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:38:34 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:38:34 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:38:34 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:38:34 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:38:34 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:34 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:34 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:38:35 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:38:35 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:38:35 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:38:35 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:38:35 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:38:35 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:35 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:35 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:38:36 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:38:36 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:38:36 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:38:36 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:38:36 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:38:36 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:36 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:36 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:38:37 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:38:37 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:38:37 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:38:37 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:38:37 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:38:37 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:37 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:37 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:38:39 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:38:39 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:38:39 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:38:39 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:38:39 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:38:39 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:39 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:39 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:38:40 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:38:40 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:38:40 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:38:40 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:38:40 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:38:40 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:40 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:40 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:38:41 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:38:41 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:38:41 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:38:41 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:38:41 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:38:42 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:42 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:42 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:38:43 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:38:43 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:38:43 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:38:43 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:38:43 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:38:43 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:43 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:43 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:38:44 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:38:44 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:38:44 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:38:44 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:38:44 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:38:44 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:44 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:44 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:38:45 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:38:45 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:38:45 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:38:45 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:38:45 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:38:45 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:45 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:45 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:38:46 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:38:46 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:38:46 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:38:46 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:38:46 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:38:46 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:46 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:46 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:38:47 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:38:47 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:38:47 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:38:47 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:38:47 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:38:47 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:47 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:47 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:38:48 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:38:48 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:38:48 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:38:48 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:38:48 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:38:48 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:48 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:48 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:38:49 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:38:49 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:38:49 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:38:49 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:38:49 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:38:49 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:49 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:49 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:38:50 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:38:50 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:38:50 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:38:50 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:38:50 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:38:51 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:51 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:51 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:38:52 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:38:52 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:38:52 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:38:52 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:38:52 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:38:52 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:52 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:52 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:38:53 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:38:53 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:38:53 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:38:53 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:38:53 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:38:53 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:53 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:53 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:38:54 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:38:54 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:38:54 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:38:54 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:38:54 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:38:55 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:55 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:55 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:38:56 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:38:56 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:38:56 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:38:56 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:38:56 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:38:56 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:56 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:56 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:38:57 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:38:57 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:38:57 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:38:57 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:38:57 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:38:57 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:57 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:57 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:38:58 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:38:58 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:38:58 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:38:58 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:38:58 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:38:58 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:58 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:58 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:38:59 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:38:59 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:38:59 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:38:59 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:38:59 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:38:59 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:38:59 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:38:59 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:39:01 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:39:01 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:39:01 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:39:01 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:39:01 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:39:01 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:39:01 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:39:01 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:39:04 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:39:04 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:39:04 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:39:04 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:39:04 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:39:04 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:39:04 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:39:04 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:39:06 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:39:06 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:39:06 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:39:06 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:39:06 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:39:06 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:39:06 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:39:06 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:39:07 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:39:07 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:39:07 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:39:07 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:39:07 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:39:07 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:39:07 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:39:07 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:39:08 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:39:08 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:39:08 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:39:08 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:39:08 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:39:09 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:39:09 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:39:09 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:39:10 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:39:10 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:39:10 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:39:10 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:39:10 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:39:10 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:39:10 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:39:10 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:39:11 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:39:11 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:39:11 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:39:11 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:39:11 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:39:11 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:39:11 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:39:11 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:39:13 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:39:13 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:39:13 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:39:13 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:39:13 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:39:13 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:39:13 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:39:13 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:39:13 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:39:13 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:39:13 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:39:13 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:39:13 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:39:14 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:39:14 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:39:14 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:39:14 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:39:14 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:39:14 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:39:14 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:39:14 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:39:15 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:39:15 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:39:15 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:39:15 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:39:15 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:39:15 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:39:15 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:39:15 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:39:15 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:39:15 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:39:15 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:39:16 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:39:16 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:39:16 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:39:16 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:39:16 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:39:16 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:39:16 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:39:16 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:39:17 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:39:17 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:39:17 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:39:17 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:39:17 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:39:17 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:39:17 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:39:17 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:39:18 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:39:18 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:39:18 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:39:18 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:39:18 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:39:18 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:39:18 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:39:18 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:39:20 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:39:20 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:39:20 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:39:20 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:39:20 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:39:20 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:39:20 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:39:20 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:39:21 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:39:21 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:39:21 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:39:21 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:39:21 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:39:21 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:39:21 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:39:21 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:39:22 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:39:22 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:39:22 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:39:22 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:39:22 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:39:23 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:39:23 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:39:23 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:39:25 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:39:25 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:39:25 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:39:25 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:39:25 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:39:25 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:39:25 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:39:25 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:39:26 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:39:26 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:39:26 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:39:26 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:39:26 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:39:26 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:39:26 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
2024.04.16 10:39:26 1: SolarForecast DEBUG> consumer "01" - current planning state: starting
2024.04.16 10:39:27 1: SolarForecast DEBUG> ############### consumerSwitching consumer "01" ###############
2024.04.16 10:39:27 1: SolarForecast DEBUG> consumer "01" - general switching parameters => auto mode: 1, current Consumption: -100 W, nompower: 250, surplus: 331 W, planstate: switching on:, starttime: 16.04.2024 10:15:42
2024.04.16 10:39:27 1: SolarForecast DEBUG> consumer "01" - isInLocktime: 0
2024.04.16 10:39:27 1: SolarForecast DEBUG> consumer "01" - current Context is >switch on< => swoncond: 1, on-command: on
2024.04.16 10:39:27 1: SolarForecast DEBUG> consumer "01" - device >STD_AKT_1_Sw< is used as switching device
2024.04.16 10:39:27 2: SolarForecast - switching Consumer 'Entfeuchter' to 'on' (Automatic = 1)
2024.04.16 10:39:27 1: SolarForecast DEBUG> consumer "01" - current Context is >switch off< => swoffcond: 0, off-command: off
Gruß Bison

#97

FHEMapp / Aw: Aktualisierungs-Intervall

Letzter Beitrag von grappa24 - 17 April 2024, 22:22:45

Das tritt sowohl unter Windows 10 mit Firefox auf als auch auf meinen Tablets mit Android und dem Dolphin-Browser.

Scheint dann ja von FHEM zu kommen, so aus der Richtung "longpoll" ? Meine FHEMWEB Instanzen verwenden alle longpoll=1

Code Auswählen Erweitern

longpoll [0|1|websocket]
Falls gesetzt, FHEMWEB benachrichtigt den Browser, wenn Gerätestatuus, Readings or Attribute sich ändern, ein Neuladen der Seite ist nicht notwendig. Zum deaktivieren 0 verwenden.
Falls websocket spezifiziert ist, läuft die Benachrichtigung des Browsers über dieses Verfahren sonst über HTTP longpoll. Achtung: ältere Browser haben keine websocket Implementierung.

#98

Anfängerfragen / Modbus Urlaubssteuerung Heizun...

Letzter Beitrag von hugo - 17 April 2024, 22:15:11

Hallo zusammen,
ich wollte meine Urlaubssteuerung der Heizung etwas smarter machen, momentan geht sie nur in den Absenkbetrieb.
Da ich eine Thermosolaranlage auf dem Dach habe, war meine Überlegung die erzeugte Wärme auch in der Urlaubszeit zum Heizen der FBH nutzen, falls genügend Wärme im Puffer vorhanden ist.
Die Steuerung erfolgt über Modbus. Leider funktioniert das untenstehende DoIf nur teilweise. Es wird immer nur ein Befehl des Blocks ausgeführt, obwohl die sets einzeln ausgeführt, alle funktionieren. Ich habe auch schon mit "wait getestet ohne Erfolg.

Hat jemand eine Idee?

Code Auswählen Erweitern

defmod di.UrlaubHeizung DOIF
([ETA_PU15_Modbus:ETA_Kollektorpumpe] eq "Ein" and
 [ETA_PU15_Modbus:ETA_Puffer_Unten] > 35 and
 [urlaub:tomorrow] ne "none"
)
(
(set ETA_PU15_Modbus ETA_FBH_ein Ein)
(set ETA_PU15_Modbus ETA_Taste_Heizen Ein)
(set ETA_PU15_Modbus ETA_Temp_Schieber 900)
)
DOELSEIF
([ETA_PU15_Modbus.ETA_FBH_ein] eq "Ein" and
 [ETA_PU15_Modbus:ETA_Puffer_Unten] < 33
 [urlaub:tomorrow] ne "none"
)
(
(set ETA_PU15_Modbus ETA_FBH_ein Aus)
(set ETA_PU15_Modbus ETA_Taste_Absenken Ein)
(set ETA_PU15_Modbus ETA_Temp_Schieber 100)
)
DOELSEIF
([urlaub:tomorrow] eq "none" and
 [urlaub:today] ne "none"
)
(
(set ETA_PU15_Modbus ETA_Kessel_ein Ein)
(set ETA_PU15_Modbus.ETA_FBH_ein Ein)
(set ETA_PU15_Modbus.ETA_Taste_Auto Ein)
)

Gruß Josef

[FHEMApp]

#99

FHEMapp / Aw: Aktualisierungs-Intervall

Letzter Beitrag von jemu75 - 17 April 2024, 22:15:03

Das klingt sehr merkwürdig. Eine regelmäßige bzw. automatische Aktualisierung der Web-Seite (Page reload) gibt es in FHEMApp nicht. Das FHEM sowas macht, wusste ich auch nicht.
Kann es sein, dass das von deinem Browser kommt?
Was für ein Betriebssystem und welchen Browser hast du duf dem betreffenden System?

#100

FHEMapp / Aw: Aktualisierungs-Intervall

Letzter Beitrag von grappa24 - 17 April 2024, 22:00:19

na ja, wenn ich eine fhemapp Seite aufrufe (z.B. Home) baut sich die Seite mit ihren devices etc. auf. Nach ein paar Sekunden aktualisiert sich die Seite, für mich manchmal "gefühlt" zu oft.

Bisher festgestellt bei 3.x wo ich natürlich sehr viel mehr devices auf einer Seite habe; aber auch bei der Beta-Version 4.

Keine Ahnung, kann ja sein, dass es an FHEM liegt, aber irgendwas stößt die Aktualisierungen an ...