Heute war die Batterie des Mebus Außenthermostat leer,
nach neu anlernen an Innenstation wurde normalerweise immer automatisch auch ein neues Device in FHEM angelegt,
heute leider nicht.
Habe nun versucht einige Werte wie cc1101_bWidth, cc1101_sens und was weis ich zu ändern, bin der Meinung nach ändern von cc1101_dataRate auf 1000 ist der CUL auf disconnectet gegangen, kann also über FHEM keine Werte mehr ändern.
Ein get AvailableFirmware und anschließendes Flashen auf die aktuelle 3.5.0 funktioniert allerdings, auch ältere Versionen habe ich versucht.
Log vom Flashen:
2022.07.24 17:49:55 3 : CUL2: Set_flash, 3.5.0 try to fetch github assets for tag 3.5.0
2022.07.24 17:49:55 3 : CUL2: Set_flash, 3.5.0 try to fetch release https://api.github.com/repos/RFD-FHEM/SIGNALDuino/releases/tags/3.5.0
2022-07-24 17:49:55 SIGNALduino CUL2 flash 3.5.0
2022.07.24 17:49:55 3 : CUL2: ParseHttpResponse, url https://objects.githubusercontent.com/github-production-release-asset-2e65be/27504581/e6effab9-1f24-405b-b3da-172145355ae7?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20220724%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20220724T154955Z&X-Amz-Expires=300&X-Amz-Signature=ad80fd78886777ef4cd0f3033b078be0925aca5505a9be311cf916389b8c37a6&X-Amz-SignedHeaders=host&actor_id=0&key_id=0&repo_id=27504581&response-content-disposition=attachment%3B%20filename%3DSIGNALDuino_nanocc1101_3.5.0.hex&response-content-type=application%2Foctet-stream returned: 69457 bytes Data
2022.07.24 17:49:55 3 : CUL2: ParseHttpResponse, Downloaded SIGNALDuino_nanocc1101_3.5.0.hex firmware from objects.githubusercontent.com
2022.07.24 17:49:55 3 : CUL2: Set_flash, filename FHEM/firmware/SIGNALDuino_nanocc1101_3.5.0.hex provided, trying to flash
2022.07.24 17:50:21 3 : CUL2: avrdude, Firmware update was successfull
2022.07.24 17:50:21 3 : Opening CUL2 device /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AL033A6C-if00-port0
2022.07.24 17:50:21 3 : Setting CUL2 serial parameters to 57600,8,N,1
2022.07.24 17:50:21 1 : CUL2: DoInit, /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AL033A6C-if00-port0@57600
2022.07.24 17:50:21 3 : CUL2 device opened
2022-07-24 17:49:56 SIGNALduino CUL2 FIRMWARE UPDATE running
2022-07-24 17:50:21 SIGNALduino CUL2 FIRMWARE UPDATE successfull
2022-07-24 17:50:21 SIGNALduino CUL2 CONNECTED
2022.07.24 17:50:21 1 : [Freezemon] myFreezemon: possible freeze starting at 17:49:57, delay is 24.456 possibly caused by: tmr-CODE(0x475d618)(SIGNALduino_avrdude)
2022.07.24 17:50:22 3 : CUL2: SimpleWrite_XQ, disable receiver (XQ)
2022.07.24 17:50:23 3 : CUL2: StartInit, get version, retry = 0
2022.07.24 17:50:27 4 : CUL868: KeepAlive, not ok, retry = 1 -> get ping
2022.07.24 17:50:27 4 : CUL868: HandleWriteQueue, called
2022.07.24 17:50:27 4 : CUL868: SendFromQueue, called
2022.07.24 17:50:27 4 : CUL868: Read, msg: OK
2022.07.24 17:50:28 4 : CUL868: HandleWriteQueue, called
2022.07.24 17:50:28 4 : CUL868: HandleWriteQueue, nothing to send, stopping timer
2022.07.24 17:50:33 1 : CUL2: CheckVersionResp, Not an SIGNALduino device, got for V: undef
2022.07.24 17:50:33 3 : CUL2: StartInit, get version, retry = 1
2022-07-24 17:50:33 SIGNALduino CUL2 no SIGNALduino found
2022.07.24 17:50:43 1 : CUL2: CheckVersionResp, Not an SIGNALduino device, got for V: undef
2022.07.24 17:50:43 3 : CUL2: StartInit, get version, retry = 2
2022-07-24 17:50:43 SIGNALduino CUL2 no SIGNALduino found
ein set CUL" raw e
Bringt mir die Fehlermeldung
CUL2 is not active, may firmware is not supported, please flash or reset
List:
Internals:
Clients :CUL_EM:CUL_FHTTK:CUL_TCM97001:CUL_TX:CUL_WS:Dooya:FHT:FLAMINGO:FS10:FS20: :Fernotron:Hideki:IT:KOPP_FC:LaCrosse:OREGON:PCA301:RFXX10REC:Revolt:SD_AS:SD_Rojaflex: :SD_BELL:SD_GT:SD_Keeloq:SD_RSL:SD_UT:SD_WS07:SD_WS09:SD_WS:SD_WS_Maverick:SOMFY: :Siro:SIGNALduino_un:
DEF /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AL033A6C-if00-port0@57600
DMSG nothing
DevState INACTIVE
DeviceName /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AL033A6C-if00-port0@57600
FUUID 5cd45f18-f33f-de02-2828-d6f4fd6c617690f1
LASTDMSG nothing
LASTDMSGID nothing
NAME CUL2
NR 430
STATE closed
TIME 1658674018.97074
TYPE SIGNALduino
cc1101_available 1
eventCount 25
initResetFlag 1
initretry 3
sendworking 0
version
versionProtocols 1.46
versionmodul 3.5.4+20220614
MatchList:
10:SD_WS07 ^P7#[A-Fa-f0-9]{6}[AFaf][A-Fa-f0-9]{2,3}
11:SD_WS09 ^P9#F[A-Fa-f0-9]+
12:SD_WS ^W\d+x{0,1}#.*
13:RFXX10REC ^(20|29)[A-Fa-f0-9]+
14:Dooya ^P16#[A-Fa-f0-9]+
15:SOMFY ^Ys[0-9A-F]+
16:SD_WS_Maverick ^P47#[A-Fa-f0-9]+
17:SD_UT ^P(?:14|20|24|26|29|30|34|46|56|68|69|76|78|81|83|86|90|91|91.1|92|93|95|97|99|104|105|114|118|121)#.*
18:FLAMINGO ^P13\.?1?#[A-Fa-f0-9]+
19:CUL_WS ^K[A-Fa-f0-9]{5,}
1:IT ^i......
20:Revolt ^r[A-Fa-f0-9]{22}
21:FS10 ^P61#[A-F0-9]+
22:Siro ^P72#[A-Fa-f0-9]+
23:FHT ^81..(04|09|0d)..(0909a001|83098301|c409c401)..
24:FS20 ^81..(04|0c)..0101a001
25:CUL_EM ^E0.................
26:Fernotron ^P82#.*
27:SD_BELL ^P(?:15|32|41|42|57|79|96|98|112)#.*
28:SD_Keeloq ^P(?:87|88)#.*
29:SD_GT ^P49#[A-Fa-f0-9]+
2:CUL_TCM97001 ^s[A-Fa-f0-9]+
30:LaCrosse ^(\S+\s+9 |OK\sWS\s)
31:KOPP_FC ^kr\w{18,}
32:PCA301 ^\S+\s+24
33:SD_Rojaflex ^P109#[A-Fa-f0-9]+
3:SD_RSL ^P1#[A-Fa-f0-9]{8}
4:OREGON ^(3[8-9A-F]|[4-6][0-9A-F]|7[0-8]).*
5:CUL_TX ^TX..........
6:SD_AS ^P2#[A-Fa-f0-9]{7,8}
7:Hideki ^P12#75[A-F0-9]+
9:CUL_FHTTK ^T[A-F0-9]{8}
X:SIGNALduino_un ^[u]\d+#.*
QUEUE:
READINGS:
2022-07-24 13:33:51 cc1101_config Freq: 433.920 MHz, Bandwidth: 325 kHz, rAmpl: 42 dB, sens: 8 dB, DataRate: 5.60 kBaud
2022-07-24 13:33:51 cc1101_config_ext Modulation: ASK/OOK
2022-07-24 13:33:52 cc1101_patable C3E = 00 84 00 00 00 00 00 00 => 5_dBm
2022-07-11 16:32:28 config MS=1;MU=1;MC=1;Mred=1
2022-07-11 16:38:58 ping OK
2022-07-24 17:50:53 state closed
additionalSets:
flash 3.5.0,3.5.0-dev+20210808,3.5.0-dev+20210623,3.4.0,3.4.0-dev+20200711,3.4.0-dev+20200216,3.3.1
helper:
avrdudecmd avrdude -c arduino -b 57600 -P /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AL033A6C-if00-port0 -p atmega328p -vv -U flash:w:FHEM/firmware/SIGNALDuino_nanocc1101_3.5.0.hex 2>./log/SIGNALduino-Flash.log || avrdude -c arduino -b 115200 -P /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AL033A6C-if00-port0 -p atmega328p -vv -U flash:w:FHEM/firmware/SIGNALDuino_nanocc1101_3.5.0.hex 2>./log/SIGNALduino-Flash.log
avrdudelogs flashing Arduino CUL2
hex file: FHEM/firmware/SIGNALDuino_nanocc1101_3.5.0.hex
port: /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AL033A6C-if00-port0
command: avrdude -c arduino -b 57600 -P /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AL033A6C-if00-port0 -p atmega328p -vv -U flash:w:FHEM/firmware/SIGNALDuino_nanocc1101_3.5.0.hex 2>[LOGFILE] || avrdude -c arduino -b 115200 -P /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AL033A6C-if00-port0 -p atmega328p -vv -U flash:w:FHEM/firmware/SIGNALDuino_nanocc1101_3.5.0.hex 2>[LOGFILE]
CUL2 closed
--- AVRDUDE ---------------------------------------------------------------------------------
avrdude: Version 6.3-20171130
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is "/etc/avrdude.conf"
User configuration file is "/opt/fhem/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Port : /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AL033A6C-if00-port0
Using Programmer : arduino
Overriding Baud Rate : 57600
AVR Part : ATmega328P
Chip Erase delay : 9000 us
PAGEL : PD7
BS2 : PC2
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
eeprom 65 20 4 0 no 1024 4 0 3600 3600 0xff 0xff
flash 65 6 128 0 yes 32768 128 256 4500 4500 0xff 0xff
lfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
hfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
efuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
lock 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00
signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00
Programmer Type : Arduino
Description : Arduino
Hardware Version: 2
Firmware Version: 1.16
Vtarget : 0.0 V
Varef : 0.0 V
Oscillator : Off
SCK period : 0.1 us
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.01s
avrdude: Device signature = 0x1e950f (probably m328p)
avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed
To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: reading input file "FHEM/firmware/SIGNALDuino_nanocc1101_3.5.0.hex"
avrdude: input file FHEM/firmware/SIGNALDuino_nanocc1101_3.5.0.hex auto detected as Intel Hex
avrdude: writing flash (24686 bytes):
Writing | ################################################## | 100% 12.34s
avrdude: 24686 bytes of flash written
avrdude: verifying flash memory against FHEM/firmware/SIGNALDuino_nanocc1101_3.5.0.hex:
avrdude: load data flash data from input file FHEM/firmware/SIGNALDuino_nanocc1101_3.5.0.hex:
avrdude: input file FHEM/firmware/SIGNALDuino_nanocc1101_3.5.0.hex auto detected as Intel Hex
avrdude: input file FHEM/firmware/SIGNALDuino_nanocc1101_3.5.0.hex contains 24686 bytes
avrdude: reading on-chip flash data:
Reading | ################################################## | 100% 10.41s
avrdude: verifying ...
avrdude: 24686 bytes of flash verified
avrdude done. Thank you.
--- AVRDUDE ---------------------------------------------------------------------------------
CUL2 reopen started
keepalive:
ok 1
retry 0
mcIdList:
10
11
12
18
43
47
52
57
58
96
119
mnIdList:
100
101
102
103
107
107.1
108
109
112
115
116
116.1
117
msIdList:
0
0.1
0.2
0.3
0.4
0.5
1
2
3
3.1
4
6
7
7.1
13
13.2
14
15
17
20
23
25
33
33.1
33.2
35
41
49
51
53
54.1
55
65
68
72.1
74.1
87
88
90
91.1
93
106
113
118.1
muIdList:
5
8
9
13.1
16
17.1
19
21
22
24
26
27
28
29
30
31
32
34
36
37
38
39
40
44
44.1
45
46
48
49.1
49.2
50
54
56
59
60
61
62
63
64
66
67
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
89
91
92
94
95
97
98
99
104
105
110
111
114
118
121
Attributes:
blacklist_IDs 42
development 1
hardware nanoCC1101
updateChannelFW testing
verbose 4
whitelist_IDs 0,0.1,0.2,0.3,0.4,0.5,1,2,3,3.1,4,5,6,7,7.1,8,9,10,11,12,13,13.1,13.2,14,15,16,17,17.1,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,33.1,33.2,34,35,36,37,38,39,40,41,43,44,44.1,45,46,47,48,49,49.1,49.2,50,51,52,53,54,54.1,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,72.1,73,74,74.1,75,76,77,78,79,80,81,82,83,84,85,86,87,88,89,90,91,91.1,92,93,94,95,96,97,98,99,100,101,102,103,104,105,106,107,107.1,108,109,110,111,112,113,114,115,116,116.1,117,118,118.1,119,121
Was könnte ich noch versuchen um den Stick wieder zum Leben zu erwecken, versuche es schon den gesammten Nachmittag erfolglos?
Mir hat in dieser Situation Mal ein einfacher reboot geholfen.
Einmal allerdings hatte sich bei mir nach dem Flashen einer neueren Version der Devicename geändert. Kann nicht schaden das zu überprüfen.
Das war so ziemlich das erste was ich versucht habe.
Auch habe ich eine 3/4 Jahr alte Sicherung von FHEM schon im PI gehabt, leider ohne erfolg.
Ich suche aktuel eine Möglichkeit den Nano mit cc1101 über Konsole oder sonstwie neu zu Flashen.
Am liebsten Windows Klicki bunt.
Edit sagt:
Kurzform habe ihn wieder zum laufen bekommen, dafür über Konsole auf nanoCul geflasht, und danach über FHEM zurück auf Signaduino, jetzt rennt er wieder.
Leider wird immer noch kein neues devise mit dem Mebus Außentemperatur sensor angelegt, kann jemand helfen?
Log Ausschnitt wo der Sensor sendet:
2022.07.24 21:02:16 4 : CUL2: Read, msg READredu: MS;P1=-8941;P2=458;P3=-4058;P4=-1980;D=21232423242324242424242424242323232323232324242424232423242323242424242324;CP=2;SP=1;R=72;O;m2;
2022.07.24 21:02:16 4 : CUL2: Parse_MS, Matched MS protocol id 0.3 -> weather (v4)
2022.07.24 21:02:16 4 : CUL2: Parse_MS, Decoded matched MS protocol id 0.3 dmsg sA807F0AC2000 length 40 RSSI = -38
2022.07.24 21:02:16 4 : CUL2: CUL_TCM97001 AURIOL_168 168 (A807F0AC2000) length: 12
2022.07.24 21:02:16 4 : CUL2: CUL_TCM97001 Parse Name: AURIOL_168 , devicecode: CUL_TCM97001_168 , Model defined: AURIOL
2022.07.24 21:02:16 4 : CUL2: CUL_TCM97001 AURIOL - ERROR temperature 203.2
2022.07.24 21:02:16 4 : CUL2: Parse_MS, Matched MS protocol id 0.4 -> weather (v5)
2022.07.24 21:02:16 4 : CUL2: Parse_MS, Decoded matched MS protocol id 0.4 dmsg sA807F0AC2000 length 40 RSSI = -38
2022.07.24 21:02:16 4 : CUL2: Dispatch, sA807F0AC2000, Dropped due to short time or equal msg
2022.07.24 21:02:16 4 : CUL2: Parse_MS, Matched MS protocol id 0.5 -> weather (v6)
2022.07.24 21:02:16 4 : CUL2: Parse_MS, Matched MS protocol id 106 -> GT-TMBBQ-01
2022.07.24 21:02:16 4 : CUL2: Read, msg READredu: MS;P1=-8932;P2=468;P3=-4046;P4=-1982;D=21232423242324242424242424242323232323232324242424232423242323242424242324;CP=2;SP=1;R=72;O;m1;
2022.07.24 21:02:16 4 : CUL2: Parse_MS, Matched MS protocol id 0.3 -> weather (v4)
2022.07.24 21:02:16 4 : CUL2: Parse_MS, Decoded matched MS protocol id 0.3 dmsg sA807F0AC2000 length 40 RSSI = -38
2022.07.24 21:02:16 4 : CUL2: Dispatch, sA807F0AC2000, Dropped due to short time or equal msg
2022.07.24 21:02:16 4 : CUL2: Parse_MS, Matched MS protocol id 0.4 -> weather (v5)
2022.07.24 21:02:16 4 : CUL2: Parse_MS, Decoded matched MS protocol id 0.4 dmsg sA807F0AC2000 length 40 RSSI = -38
2022.07.24 21:02:16 4 : CUL2: Dispatch, sA807F0AC2000, Dropped due to short time or equal msg
2022.07.24 21:02:16 4 : CUL2: Parse_MS, Matched MS protocol id 0.5 -> weather (v6)
2022.07.24 21:02:16 4 : CUL2: Parse_MS, Matched MS protocol id 106 -> GT-TMBBQ-01
2022.07.24 21:02:16 4 : CUL2: Read, msg READredu: MS;P1=-8938;P2=460;P3=-4055;P4=-1976;D=21232423242324242424242424242323232323232324242424232423242323242424242324;CP=2;SP=1;R=72;O;m0;
2022.07.24 21:02:16 4 : CUL2: Parse_MS, Matched MS protocol id 0.3 -> weather (v4)
2022.07.24 21:02:16 4 : CUL2: Parse_MS, Decoded matched MS protocol id 0.3 dmsg sA807F0AC2000 length 40 RSSI = -38
2022.07.24 21:02:16 4 : CUL2: Dispatch, sA807F0AC2000, Dropped due to short time or equal msg
2022.07.24 21:02:16 4 : CUL2: Parse_MS, Matched MS protocol id 0.4 -> weather (v5)
2022.07.24 21:02:16 4 : CUL2: Parse_MS, Decoded matched MS protocol id 0.4 dmsg sA807F0AC2000 length 40 RSSI = -38
2022.07.24 21:02:16 4 : CUL2: Dispatch, sA807F0AC2000, Dropped due to short time or equal msg
2022.07.24 21:02:16 4 : CUL2: Parse_MS, Matched MS protocol id 0.5 -> weather (v6)
2022.07.24 21:02:16 4 : CUL2: Parse_MS, Matched MS protocol id 106 -> GT-TMBBQ-01
2022.07.24 21:02:16 4 : CUL2: Read, msg READredu: MS;P1=-8937;P2=461;P3=-4054;P4=-1976;D=21232423242324242424242424242323232323232324242424232423242323242424242324;CP=2;SP=1;R=72;O;
2022.07.24 21:02:16 4 : CUL2: Parse_MS, Matched MS protocol id 0.3 -> weather (v4)
2022.07.24 21:02:16 4 : CUL2: Parse_MS, Decoded matched MS protocol id 0.3 dmsg sA807F0AC2000 length 40 RSSI = -38
2022.07.24 21:02:16 4 : CUL2: Dispatch, sA807F0AC2000, Dropped due to short time or equal msg
2022.07.24 21:02:16 4 : CUL2: Parse_MS, Matched MS protocol id 0.4 -> weather (v5)
2022.07.24 21:02:16 4 : CUL2: Parse_MS, Decoded matched MS protocol id 0.4 dmsg sA807F0AC2000 length 40 RSSI = -38
2022.07.24 21:02:16 4 : CUL2: Dispatch, sA807F0AC2000, Dropped due to short time or equal msg
2022.07.24 21:02:16 4 : CUL2: Parse_MS, Matched MS protocol id 0.5 -> weather (v6)
2022.07.24 21:02:16 4 : CUL2: Parse_MS, Matched MS protocol id 106 -> GT-TMBBQ-01
[code]022.07.24 21:09:25 4 : CUL2: Read, msg READredu: MS;P1=-8943;P2=464;P3=-4072;P4=-1982;D=21232423242324242424242324242424242424242423242424232423242323242424242323;CP=2;SP=1;R=87;O;m2;
2022.07.24 21:09:25 4 : CUL2: Parse_MS, Matched MS protocol id 0.3 -> weather (v4)
2022.07.24 21:09:25 4 : CUL2: Parse_MS, Decoded matched MS protocol id 0.3 dmsg sA82008AC3000 length 40 RSSI = -30.5
2022.07.24 21:09:25 4 : CUL2: CUL_TCM97001 AURIOL_168 168 (A82008AC3000) length: 12
2022.07.24 21:09:25 4 : CUL2: CUL_TCM97001 Parse Name: AURIOL_168 , devicecode: CUL_TCM97001_168 , Model defined: AURIOL
2022.07.24 21:09:25 4 : CUL2: CUL_TCM97001 using longid: 1 model: AURIOL, deviceCode: CUL_TCM97001_168
2022.07.24 21:09:25 4 : CUL2: Parse_MS, Matched MS protocol id 0.4 -> weather (v5)
2022.07.24 21:09:25 4 : CUL2: Parse_MS, Decoded matched MS protocol id 0.4 dmsg sA82008AC3000 length 40 RSSI = -30.5
2022.07.24 21:09:25 4 : CUL2: Dispatch, sA82008AC3000, Dropped due to short time or equal msg
2022.07.24 21:09:25 4 : CUL2: Parse_MS, Matched MS protocol id 0.5 -> weather (v6)
2022.07.24 21:09:25 4 : CUL2: Parse_MS, Matched MS protocol id 106 -> GT-TMBBQ-01
2022.07.24 21:09:25 4 : CUL2: Read, msg READredu: MS;P1=-8943;P2=458;P3=-4065;P4=-1984;D=21232423242324242424242324242424242424242423242424232423242323242424242323;CP=2;SP=1;R=87;O;m1;
2022.07.24 21:09:25 4 : CUL2: Parse_MS, Matched MS protocol id 0.3 -> weather (v4)
2022.07.24 21:09:25 4 : CUL2: Parse_MS, Decoded matched MS protocol id 0.3 dmsg sA82008AC3000 length 40 RSSI = -30.5
2022.07.24 21:09:25 4 : CUL2: Dispatch, sA82008AC3000, Dropped due to short time or equal msg
2022.07.24 21:09:25 4 : CUL2: Parse_MS, Matched MS protocol id 0.4 -> weather (v5)
2022.07.24 21:09:25 4 : CUL2: Parse_MS, Decoded matched MS protocol id 0.4 dmsg sA82008AC3000 length 40 RSSI = -30.5
2022.07.24 21:09:25 4 : CUL2: Dispatch, sA82008AC3000, Dropped due to short time or equal msg
2022.07.24 21:09:25 4 : CUL2: Parse_MS, Matched MS protocol id 0.5 -> weather (v6)
2022.07.24 21:09:25 4 : CUL2: Parse_MS, Matched MS protocol id 106 -> GT-TMBBQ-01
2022.07.24 21:09:25 4 : CUL2: Read, msg READredu: MS;P1=-8947;P2=456;P3=-4064;P4=-1982;D=21232423242324242424242324242424242424242423242424232423242323242424242323;CP=2;SP=1;R=87;O;m0;
2022.07.24 21:09:25 4 : CUL2: Parse_MS, Matched MS protocol id 0.3 -> weather (v4)
2022.07.24 21:09:25 4 : CUL2: Parse_MS, Decoded matched MS protocol id 0.3 dmsg sA82008AC3000 length 40 RSSI = -30.5
2022.07.24 21:09:25 4 : CUL2: Dispatch, sA82008AC3000, Dropped due to short time or equal msg
2022.07.24 21:09:25 4 : CUL2: Parse_MS, Matched MS protocol id 0.4 -> weather (v5)
2022.07.24 21:09:25 4 : CUL2: Parse_MS, Decoded matched MS protocol id 0.4 dmsg sA82008AC3000 length 40 RSSI = -30.5
2022.07.24 21:09:25 4 : CUL2: Dispatch, sA82008AC3000, Dropped due to short time or equal msg
2022.07.24 21:09:25 4 : CUL2: Parse_MS, Matched MS protocol id 0.5 -> weather (v6)
2022.07.24 21:09:25 4 : CUL2: Parse_MS, Matched MS protocol id 106 -> GT-TMBBQ-01
2022.07.24 21:09:25 4 : CUL2: Read, msg READredu: MS;P1=-8947;P2=460;P3=-4072;P4=-1985;D=21232423242324242424242324242424242424242423242424232423242323242424242323;CP=2;SP=1;R=87;O;
2022.07.24 21:09:25 4 : CUL2: Parse_MS, Matched MS protocol id 0.3 -> weather (v4)
2022.07.24 21:09:25 4 : CUL2: Parse_MS, Decoded matched MS protocol id 0.3 dmsg sA82008AC3000 length 40 RSSI = -30.5
2022.07.24 21:09:25 4 : CUL2: Dispatch, sA82008AC3000, Dropped due to short time or equal msg
2022.07.24 21:09:25 4 : CUL2: Parse_MS, Matched MS protocol id 0.4 -> weather (v5)
2022.07.24 21:09:25 4 : CUL2: Parse_MS, Decoded matched MS protocol id 0.4 dmsg sA82008AC3000 length 40 RSSI = -30.5
2022.07.24 21:09:25 4 : CUL2: Dispatch, sA82008AC3000, Dropped due to short time or equal msg
2022.07.24 21:09:25 4 : CUL2: Parse_MS, Matched MS protocol id 0.5 -> weather (v6)
2022.07.24 21:09:25 4 : CUL2: Parse_MS, Matched MS protocol id 106 -> GT-TMBBQ-01
2022.07.24 21:09:25 4 : CUL2: Read, msg READredu: MU;P0=460;P1=-1979;P2=-4067;P3=-8948;P4=336;D=0101010101020101010201020102020101010102020302010201020101014;CP=0;R=89;
2022.07.24 21:09:25 4 : CUL2: Parse_MU, Fingerprint for MU protocol id 63 -> Warema matches, trying to demodulat
Wie komme ich hier weiter um das device an zu legen, und warum macht er es nicht mehr selbstständig?
also du solltest mit avrdude von der cli aus flashen können. Ich bezweifele aber, dass das hilft. Du kannst natürlich auch zuerst in die SIGNALduino-Flash.log schauen, ob das Flashen via fhem erfolgreich war.
edit:
zu spät ;)
Danke aber dennoch,
und mit glück schaut noch jemand vorbei der mir sagen kann wie der Sensor angelegt werden kann,
den Log habe ich im letzten Beitrag ja schon angehängt.
Bitte entferne beim mebus nochmals kurz die Batterie damit er eine andere ID bekommt.
Gruß Ralf
So ein §$&$X%$§....................7 oder 8 Stunden habe ich mit dem Mist gestern verschwendet.
Danke, vielen vielen dank Ralf, der Tipp war Gold wert, sofort nach dem einlegen hat er das Divice angelegt :)
Gruß
Karsten