Perl Warnungen nach restart, HMCCU Problem?

[MartinD]

Regen wird bei mir erfasst mit:

Code Auswählen Erweitern

Device channels and datapoints

DEV WettersensorWDS100_IP LEQ0644213 interface=BidCos-RF type=HM-WDS100-C6-O
CHN LEQ0644213:0 WettersensorWDS100_IP:0
   0.UNREACH = false {b} [RE]
   0.STICKY_UNREACH = false {b} [RWE]
   0.CONFIG_PENDING = false {b} [RE]
   0.LOWBAT = false {b} [RE]
   0.RSSI_DEVICE = 1 {n} [RE]
   0.RSSI_PEER = 184 {n} [RE]
   0.DEVICE_IN_BOOTLOADER = false {b} [RE]
   0.UPDATE_PENDING = false {b} [RE]
CHN LEQ0644213:1 HM-WDS100-C6-O LEQ0644213:1
   1.TEMPERATURE = 2.700000 {f} [RE]
   1.HUMIDITY = 85 {i} [RE]
   1.RAINING = false {b} [RE]
   1.RAIN_COUNTER = 582.625000 {f} [RE]
   1.WIND_SPEED = 0.000000 {f} [RE]
   1.WIND_DIRECTION = 80 {i} [RE]
   1.WIND_DIRECTION_RANGE = 67 {i} [RE]
   1.SUNSHINEDURATION = 66 {i} [RE]
   1.BRIGHTNESS = 7 {i} [RE]
   ${sysVarRainToday} = 0.000000 {f} [RWE]
   ${sysVarRainYesterday} = 0.000000 {f} [RWE]

Device detection:
StateDatapoint = 1.TEMPERATURE [WEATHER]
No control datapoint detected

Recommended module for device definition: HMCCUCHN

Device description

Device LEQ0644213 WettersensorWDS100_IP [HM-WDS100-C6-O]
  CHILDREN: LEQ0644213:0,LEQ0644213:1
  FIRMWARE: 1.4
  FLAGS: Visible
  INTERFACE: PEQ1842175
  PARAMSETS: MASTER
  RF_ADDRESS: 2848640
  ROAMING: 0
  RX_MODE: ALWAYS,LAZY_CONFIG
  UPDATABLE: 0
Channel LEQ0644213:0 WettersensorWDS100_IP:0 [MAINTENANCE]
  AES_ACTIVE: 0
  DIRECTION: NONE
  FLAGS: Visible,Internal
  PARAMSETS: MASTER,VALUES
  PARENT: LEQ0644213
  PARENT_TYPE: HM-WDS100-C6-O

Defaults

Mit besten Grüßen
Martin