Neuigkeiten:

Am Sonntag den 8.12.2024 kann es ab ca. 8:00 Uhr zu kurzzeitigen Einschränkungen / Ausfällen bei den Diensten des FHEM Vereines kommen.
Die Server müssen mal gewartet und dabei neu gestartet werden ;)

Hauptmenü

[gelöst]FHEM Docker Container lässt sich nicht mehr starten

Begonnen von fhemjan, 01 Januar 2023, 20:20:57

Vorheriges Thema - Nächstes Thema

fhemjan

Hallo zusammen. Ich habe von meinem Problem schon im Docker-Thread berichtet (https://forum.fhem.de/index.php/topic,89745.msg1250739.html#msg1250739), finde den Thread jedoch etwas unübersichtlich, da dort doch recht viele Fragen durcheinander gehen..
Ich betreibe ein paar Homematic Thermostate und Fensterkontakte mit einem cul868. Von einem auf den anderen Tag startet nun der Docker Container nicht mehr und ich bekomme ihn auch nicht mehr zum Laufen --> wenn ich in Portainer den FHEM Container starte erscheint die Meldung:
Request failed with status code 500Habe auch mit abgezogenem cul868 getestet, kein Erfolg.
Habe probiert Backups aufzuspielen, von Tagen an dem FHEM noch lief, aber keine Chance: Der Container steht nach dem Hochfahren des Raspberries auf "exited".

In Portainer gibt er mit folgendes Log (ihr hattet im docker-Thread schon angemerkt, das es vermutlich das fhem log ist, das dort angezeigt wird):
2022.11.29 23:10:03.218 3: cul868: Unknown code A1312008321DECEF000010000E322AFE55DAF0FC6::-105.5:cul868, help me!
2022.11.29 23:11:16.372 3: cul868: Unknown code A131200832285DCF000010000E08F07116088745A::-103:cul868, help me!
2022.11.29 23:11:34.971 3: cul868: Unknown code A1714008E4487E933BCF800005CE450FB744F2E5B3574C38B::-94:cul868, help me!
2022.11.29 23:11:53.044 3: cul868: Unknown code A131200833BAD69F0000100106583333F5B16A7DC::-106.5:cul868, help me!
2022.11.29 23:12:17.487 3: cul868: Unknown code A0CC786701FC93F000000009A3F::-107.5:cul868, help me!
2022.11.29 23:13:13.613 2: LuftdatenInfo (Luftdaten_BadNenndorf) - error while request: read from https://data.sensor.community:443 timed out
2022.11.29 23:13:13.615 2: LuftdatenInfo (Luftdaten_BadNenndorf) - error while request: read from https://data.sensor.community:443 timed out
2022.11.29 23:13:33.043 3: cul868: Unknown code A131200833DEA8CF000010000B0B0DEADC6164C86::-102.5:cul868, help me!
2022.11.29 23:13:38.255 3: cul868: Unknown code A131200836225A4F000010000BF9390E7B120AF66::-101.5:cul868, help me!
2022.11.29 23:15:01.688 3: cul868: Unknown code A13120083518020F000010057E573422EE63FDAF8::-99.5:cul868, help me!
2022.11.29 23:17:11.243 3: cul868: Unknown code A0CC986701FC93F000000009A40::-108.5:cul868, help me!
2022.11.29 23:18:43.473 3: cul868: Unknown code A131200837CD6B8F0000100003A2B8AAC5B9DC251::-102.5:cul868, help me!
2022.11.29 23:19:08.801 3: cul868: Unknown code A121200834487E9F0000100005CE5CFC35986FC::-94:cul868, help me!
2022.11.29 23:19:13.074 3: cul868: Unknown code A1714008E4487E969A4C300005CE66D049EF3707DD6BB4D98::-94.5:cul868, help me!
2022.11.29 23:19:34.724 3: cul868: Unknown code A1312008321DECEF000010000E323CCD7759B8C04::-106.5:cul868, help me!
2022.11.29 23:19:44.531 3: cul868: Unknown code A131200834487E9F0000100005CE72664E381DA23::-94:cul868, help me!
2022.11.29 23:20:02.693 3: cul868: Unknown code A121200833FB1B8F00001000315E3A6B2BEF7F7::-108:cul868, help me!
2022.11.29 23:20:07.970 3: cul868: Unknown code A1510008E7CD6B8B7B1BB00003A2CB8A9A22A8C1C0607::-103.5:cul868, help me!
2022.11.29 23:20:08.110 3: cul868: Unknown code A06B7B1BB7CD6B8, help me!
2022.11.29 23:21:28.945 3: cul868: Unknown code A131200832285DCF000010000E0909CE0E605E551::-103:cul868, help me!
2022.11.29 23:21:35.383 3: cul868: Unknown code A1714008E4487E94E38D700005CE8E347C9428C1DB4F5EAA7::-94.5:cul868, help me!
2022.11.29 23:21:37.345 3: cul868: Unknown code A1B10008E2FFD6DB7B1BB000048936996CE2F5974938772D3F018AA49::-99:cul868, help me!
2022.11.29 23:21:40.767 3: cul868: Unknown code A131200833BAD69F00001001065841EE8E662128C::-106.5:cul868, help me!
2022.11.29 23:21:53.492 3: cul868: Unknown code A1C10008E49DAFDB7B1BB00001B3E8DED316CD87D551E86F9589722494F::-107.5:cul868, help me!
2022.11.29 23:22:11.250 3: cul868: Unknown code A0CCB86701FC93F000000009A40::-108.5:cul868, help me!
2022.11.29 23:22:18.285 3: cul868: Unknown code A131200832D9BEEF000010000245D5F0CF8262822::-103:cul868, help me!
2022.11.29 23:23:00.946 3: cul868: Unknown code A13120083464A2DF00001000009E8F1336877FECB::-105.5:cul868, help me!
2022.11.29 23:23:16.280 3: cul868: Unknown code A131200833DEA8CF000010000B0B1E283AED6FEA0::-103.5:cul868, help me!
2022.11.29 23:24:07.581 3: cul868: Unknown code A131200836225A4F000010000BF9424816803F38F::-102:cul868, help me!
2022.11.29 23:24:16.082 3: cul868: Unknown code A06891284AD4786, help me!
2022.11.29 23:24:19.754 3: cul868: Unknown code A0CCC86701FC93F000000009A40::-108:cul868, help me!
2022.11.29 23:25:09.045 3: cul868: Unknown code A1810008E415AAEB7B1BB000036F5217F40CB0F7FCCA89B5EA7::-101:cul868, help me!
2022.11.29 23:25:09.188 3: cul868: Unknown code A06B7B1BB415AAE, help me!
2022.11.29 23:27:00.043 3: cul868: Unknown code A13120083AFB19EF0000100042D0878210DDC8836::-104.5:cul868, help me!
2022.11.29 23:27:06.392 3: cul868: Unknown code A0624B5ACBD7782, help me!
2022.11.29 23:27:17.757 3: cul868: Unknown code A0CCD86701FC93F000000009A40::-109:cul868, help me!
2022.11.29 23:28:58.762 3: cul868: Unknown code A121200834487E9F0000100005CEAF6441F2582::-94:cul868, help me!
2022.11.29 23:29:11.897 3: cul868: Unknown code A1312008321DECEF000010000E324A60275225101::-105:cul868, help me!
2022.11.29 23:29:19.686 3: cul868: Unknown code A131200834487E9F0000100005CEBB54079E17422::-94:cul868, help me!
2022.11.29 23:29:34.954 3: cul868: Unknown code A121200833FB1B8F00001000315E8CFEDA0D0B3::-106:cul868, help me!
2022.11.29 23:30:01.263 3: cul868: Unknown code A0CCE86701FC93F000000009A40::-109:cul868, help me!
2022.11.29 23:31:04.999 3: cul868: Unknown code A131200832285DCF000010000E09133B39AB14E40::-104.5:cul868, help me!
2022.11.29 23:31:19.772 3: cul868: Unknown code A131200833BAD69F00001001065854D1646A02E6E::-106.5:cul868, help me!
2022.11.29 23:31:53.149 3: cul868: Unknown code A131200833FB1B8F00001000315EBFC933189A3C0::-109.5:cul868, help me!
2022.11.29 23:32:30.515 3: cul868: Unknown code A0CCF86701FC93F000000009A40::-108:cul868, help me!
2022.11.29 23:32:43.432 3: cul868: Unknown code A1714008E4487E92AF40900005CEE904F19AAAEF9C89EE9A2::-94.5:cul868, help me!
2022.11.29 23:33:12.218 3: cul868: Unknown code A1C10008E6225A4B7B1BB0000BF958E9FAC0277C3A48EF57EFE593A6A34::-102:cul868, help me!
2022.11.29 23:33:12.356 3: cul868: Unknown code A06B7B1BB6225A4, help me!
2022.11.29 23:33:29.873 3: cul868: Unknown code A1C10008E2285DCB7B1BB0000E092D9AF24921D828C31572909754EF261::-104:cul868, help me!
2022.11.29 23:33:30.010 3: cul868: Unknown code A06B7B1BB2285DC, help me!
2022.11.29 23:33:37.255 3: cul868: Unknown code A131200833DEA8CF000010000B0B23893C8170348::-102:cul868, help me!
2022.11.29 23:33:53.889 3: cul868: Unknown code A131200836225A4F000010000BF96ABB420A3F0A8::-101.5:cul868, help me!
2022.11.29 23:37:10.678 3: cul868: Unknown code A13120083AFB19EF0000100042D0980D0FB304856::-107:cul868, help me!
2022.11.29 23:37:15.050 3: cul868: Unknown code A1C10008E3DEA8CB7B1BB0000B0B38F0B291954903B424A504FC2F32197::-102:cul868, help me!
2022.11.29 23:37:15.194 3: cul868: Unknown code A06B7B1BB3DEA8C, help me!
2022.11.29 23:37:36.209 3: cul868: Unknown code A06B7B1BB3FB1B8, help me!
2022.11.29 23:39:00.698 3: cul868: Unknown code A131200834487E9F0000100005CEFEAB9FB8F49A2::-94:cul868, help me!
2022.11.29 23:39:21.312 3: cul868: Unknown code A1312008321DECEF000010000E325C9DB8A3BEC8D::-106:cul868, help me!
2022.11.29 23:39:27.946 3: cul868: Unknown code A121200834487E9F0000100005CF0D013441D72::-94:cul868, help me!
2022.11.29 23:41:05.504 3: cul868: Unknown code A131200832285DCF000010000E0934D3A393D4184::-103.5:cul868, help me!
2022.11.29 23:41:24.480 3: cul868: Unknown code A131200833BAD69F00001001065868A08B3735E85::-106:cul868, help me!
2022.11.29 23:41:37.970 3: cul868: Unknown code A2110008E3DEA8CB7B1BB0000B0B40762F6CFE871F2667C21DB9ED32CFCAD0E9B2ED1::-105.5:cul868, help me!
2022.11.29 23:41:38.063 3: cul868: Unknown code A1E10008E3DEA8CB7B1BB0000B0B543CD9FCEB04006D0DB948910D92C904012::-104:cul868, help me!
2022.11.29 23:41:38.144 3: cul868: Unknown code A2110008E3DEA8CB7B1BB0000B0B664D0A5C17C04FC45422E68222CB5DF1082F8C524::-103:cul868, help me!
2022.11.29 23:43:14.613 2: LuftdatenInfo (Luftdaten_BadNenndorf) - error while request: read from https://data.sensor.community:443 timed out
2022.11.29 23:43:14.636 2: LuftdatenInfo (Luftdaten_BadNenndorf) - error while request: read from https://data.sensor.community:443 timed out
2022.11.29 23:43:40.800 3: cul868: Unknown code A2710008E4487E9B7B1BB00005CF25F4F54E4058C2EC23AA3AC4329B974AFDD7818E96C5C2CF35C8F::-94:cul868, help me!
2022.11.29 23:43:41.084 3: cul868: Unknown code A06B7B1BB4487E9, help me!
2022.11.29 23:43:45.554 3: cul868: Unknown code A131200836225A4F000010000BF978337E991CD9E::-101:cul868, help me!
2022.11.29 23:44:10.836 3: cul868: Unknown code A131200833DEA8CF000010000B0B70E40ACFDC70D::-105:cul868, help me!
2022.11.29 23:47:00.868 3: cul868: Unknown code A13120083AFB19EF0000100042D0A5447C7F16779::-105:cul868, help me!
2022.11.29 23:48:54.807 3: cul868: Unknown code A131200834487E9F0000100005CF5F643DF71AABD::-94:cul868, help me!
2022.11.29 23:48:57.337 3: cul868: Unknown code A1312008321DECEF000010000E3264DBA03B62E9D::-106:cul868, help me!
2022.11.29 23:49:29.356 3: cul868: Unknown code A121200834487E9F0000100005CF69D06FDA3A9::-94:cul868, help me!
2022.11.29 23:50:45.260 3: cul868: Unknown code A131200832285DCF000010000E09475BEBB086E04::-105:cul868, help me!
2022.11.29 23:52:09.783 3: cul868: Unknown code A2510008E49DAFDB7B1BB00001B4CE7BDAD020A1DA2E0ADB97C1C59AF3052BFCB9914A81B0E67::-107.5:cul868, help me!
2022.11.29 23:53:16.303 3: cul868: Unknown code A131200836225A4F000010000BF989086AE46F898::-101.5:cul868, help me!
2022.11.29 23:53:54.691 3: cul868: Unknown code A131200833DEA8CF000010000B0B85F3AFAA2007F::-102.5:cul868, help me!
2022.11.29 23:55:42.074 3: cul868: Unknown code A2110008EAFB19EB7B1BB00042D0B4BD19FFEA4AA5794874307B51FD79082A6FD8253::-105.5:cul868, help me!
2022.11.29 23:55:42.247 3: cul868: Unknown code A2110008EAFB19EB7B1BB00042D0D046F7F491D823C120F4AB30FF392A8F259EF2F68::-106:cul868, help me!
2022.11.29 23:55:42.925 3: cul868: Unknown code A131200832FFD6DF0000100004894171625BF1A04::-99.5:cul868, help me!
2022.11.29 23:55:42.971 3: cul868: Unknown code A1714008E4487E92FFD6D00005CF841C0E036098B657F6D16::-94.5:cul868, help me!
2022.11.29 23:56:36.273 3: cul868: Unknown code A1950008F49DAFDF0000100001B4EF4A390CC18E3E53CF5138ED2::-107.5:cul868, help me!
2022.11.29 23:56:50.338 3: cul868: Unknown code A13120083AFB19EF0000100042D0E4346F8EB1032::-106.5:cul868, help me!
2022.11.29 23:58:32.742 3: cul868: Unknown code A131200834487E9F0000100005CFA57AA9A7E75B4::-94:cul868, help me!
2022.11.29 23:58:45.984 3: cul868: Unknown code A1312008321DECEF000010000E327301E737B620A::-103:cul868, help me!
2022.11.29 23:59:06.701 3: cul868: Unknown code A121200833FB1B8F00001000315FBA13F0A9B9F::-109.5:cul868, help me!
2022.11.29 23:59:15.719 3: cul868: Unknown code A1E10008E518020B7B1BB0057E574B341DA808077B49B668521B7565BEDE84B::-100.5:cul868, help me!
2022.11.29 23:59:15.854 3: cul868: Unknown code A06B7B1BB518020, help me!
2022.11.29 23:59:41.337 3: cul868: Unknown code A121200834487E9F0000100005CFB6D0AF43AC2::-94:cul868, help me!
2022.11.29 23:59:59.302 3: cul868: Unknown code A0CDA86701FC93F000000009A40::-108:cul868, help me!
SIGTERM signal received, sending "shutdown" command to FHEM!
Waiting for FHEM process to terminate before stopping container:
2022.11.30 00:00:09.078 2: DbLog logdb - Last database write cycle due to shutdown ...
2022.11.30 00:00:09.304 2: DbLog logdb - no data for last database write cycle
2022.11.30 00:00:09.304 1: Server shutdown delayed due to logdb for max 10 sec

Ihr hattet im anderen Thread auch noch einem Docker-Log gefragt. Könnt ihr mir einen Tipp geben wie ich da ran komme?
Es kam auch öfter der Hinweis, das ein cul868 nicht die richtige Wahl ist. Ich habe mir nun einen HM-MOD-RPI-PCB geholt. Nur kann ich ihn nun gar nicht ausprobieren, weil der Container nicht zum Laufen zu bewegen ist.
Die anderen Container (Pihole, Watchtower, mariadb, phpmyadmin) funktionieren ohne Probleme.

Update: Ich habe gerade gesehen, das es die folgende Info zum Container gibt:
Stopped for a month with exit code 137Habe dazu recherchiert:
Exit code 137 occurs when a process is terminated because it's using too much memory.Kennt ihr das Problem, bzw. habe einen Tipp was ich machen kann? Es ist ein Rasp 4 mit 4 GB. In der MariaDB sind um die 12 MB gewesen meine ich. Es laufen ansonsten nur die oben genannten Container auf dem Pi sowie ein USV-Server.

Update: Wenn ich über htop die RAM-Auslastung anschaue ist er bei 244 MB von 3,79 GB (ohne das FHEM läuft natürlich... denn es läuft ja nicht....)

Otto123

Ein gesundes neues Jahr,

wie lange läuft denn der Container? Man sieht in dem Log nur eine knappe Stunde und leider keinen Start.
Was mir auffällt: er bekommt offenbar ziemlich exakt 00:00 Uhr einen shutdown Signal. Zufall?

Gruß Otto
Viele Grüße aus Leipzig  ⇉  nächster Stammtisch an der Lindennaundorfer Mühle
RaspberryPi B B+ B2 B3 B3+ ZeroW,HMLAN,HMUART,Homematic,Fritz!Box 7590,WRT3200ACS-OpenWrt,Sonos,VU+,Arduino nano,ESP8266,MQTT,Zigbee,deconz

fhemjan

#2
Hallo Otto,
dir auch ein frohes Neues und danke für die schnelle Antwort.
Also:
1. Der Container läuft laut Portainer seit dem 01.09.2022. Wenn ich das Log über putty abfrage geht er weiter zurück, zeigt jedoch nicht alles an. Bin gerade noch am schauen ob ich einen Weg finde das komplette Log als Datei zu ziehen. Was man jedoch auch hier schon sieht: ich bekomme echt etliche "help me!" Abfragen:

Update: Habe ich rausgenommen, die Nachricht ist zu lang für das Forum mit allen fehlerhaften Abfragen --> von nicht mal einem Tag!!

2. Der Shutdown um 0 Uhr ist gewollt. Der Raspberry macht dann ein Backup von sich selbst.

Otto123

zu den helpme hatte ich schon gesagt: VCCU definieren, das sind Geräte aus deinem Umfeld (Nachbar?)
Aber ich meine da sind HMIp Telegramme dabei, die bekommst Du damit ev. nicht weg, da hilft ev. nur attr cul868 verbose 2

ZitatVon einem auf den anderen Tag startet nun der Docker Container nicht mehr und ich bekomme ihn auch nicht mehr zum Laufen
Aber Du sagst doch er läuft?  ::)
Viele Grüße aus Leipzig  ⇉  nächster Stammtisch an der Lindennaundorfer Mühle
RaspberryPi B B+ B2 B3 B3+ ZeroW,HMLAN,HMUART,Homematic,Fritz!Box 7590,WRT3200ACS-OpenWrt,Sonos,VU+,Arduino nano,ESP8266,MQTT,Zigbee,deconz

fhemjan

Zitat von: Otto123 am 01 Januar 2023, 20:53:41
Aber Du sagst doch er läuft?  ::)

Hm wie meinst du? Also er lief seit 01.09., natürlich immer mit Problemchen hier und da bzgl. dem Anlernen von Geräten und so, aber der Container selbst lief immer total zuverlässig. Und nun von einem auf den anderen Tag, glaub es war von 02. Auf 03. 12., steht der Container beim Neustart vom Raspberry in Portainer immer auf "exited" und lässt sich nicht mehr starten

Edit: Im Log steht ein älteres Datum weil ich ein Backup eingespielt habe. Aber auch mit älterem Backup gleiches Problem

fhemjan

Ich habe es nun hinbekommen das gesamte Log herunterzuladen. Hier die ersten zwei Stunden nach dem Start:
Preparing user environment ...
1. Creating group 'fhem' with GID 1000 ...
2. Enforcing GID for group 'bluetooth' to 6001 ...
3. Creating user 'fhem' with UID 1000 ...
4. Creating log directory /opt/fhem/./log ...
5. Enforcing user and group ownership for /opt/fhem to fhem:fhem ...
6. Enforcing file and directory permissions for /opt/fhem ...
7. Correcting group ownership for /dev/tty* ...
8. Correcting group ownership for /dev/serial/* ...
9. Found GPIO: Correcting group permissions in /dev and /sys to 'gpio' with GID 997 ...
10. Found I2C: Correcting group permissions in /dev to 'i2c' with GID 6003 ...
11. Updating /etc/sudoers.d/fhem-docker ...
12. Adding gateway.docker.internal to /etc/hosts ...
13. Adding host.docker.internal to /etc/hosts ...
14. Pre-authorizing SSH to Docker host for user 'fhem' ...
15. Updating SSH key pinning and SSH client permissions for user 'fhem' ...



Preparing configuration ... done

Starting FHEM ...
2022.11.29 00:07:58.734 3: From the FHEM_GLOBALATTR environment: attr global logfile ./log/fhem-%Y-%m-%d.log
2022.11.29 00:07:58.734 3: From the FHEM_GLOBALATTR environment: attr global nofork 0
2022.11.29 00:07:58.735 3: From the FHEM_GLOBALATTR environment: attr global updateInBackground 1
2022.11.29 00:07:58.735 3: From the FHEM_GLOBALATTR environment: attr global pidfilename ./log/fhem.pid
2022.11.29 00:07:58.750 1: Including fhem.cfg
2022.11.29 00:07:59.161 3: WEB: port 8083 opened
2022.11.29 00:07:59.281 2: eventTypes: loaded 2365 lines from ./log/eventTypes.txt
2022.11.29 00:08:00.180 3: AptToDate (fhemServerApt) - defined
2022.11.29 00:08:01.551 3: telnetPort: port 7072 opened
2022.11.29 00:08:01.579 3: Opening nanoCUL device /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0
2022.11.29 00:08:01.648 3: Setting nanoCUL serial parameters to 38400,8,N,1
2022.11.29 00:08:04.806 3: nanoCUL: Possible commands: ABCeFfGiKLlMNRTtUVWXx
2022.11.29 00:08:04.814 3: nanoCUL device opened
2022.11.29 00:08:05.426 3: Opening cul868 device /dev/serial/by-id/usb-busware.de_CUL868-if00
2022.11.29 00:08:05.429 3: Setting cul868 serial parameters to 38400,8,N,1
2022.11.29 00:08:05.539 3: cul868: Possible commands: ABbCeFGhiKkLlMmNRTtUuVWXxYZ
2022.11.29 00:08:05.542 3: cul868 device opened
2022.11.29 00:08:05.548 2: Switched cul868 rfmode to HomeMatic
2022.11.29 00:08:09.029 1: Including ./log/fhem.save
2022.11.29 00:08:09.293 3: From the FHEM_GLOBALATTR environment: attr global logfile ./log/fhem-%Y-%m-%d.log
2022.11.29 00:08:09.294 3: From the FHEM_GLOBALATTR environment: attr global nofork 0
2022.11.29 00:08:09.294 3: From the FHEM_GLOBALATTR environment: attr global updateInBackground 1
2022.11.29 00:08:09.294 3: From the FHEM_GLOBALATTR environment: attr global pidfilename ./log/fhem.pid
2022.11.29 00:08:17.881 1: usb create starting
2022.11.29 00:08:18.282 1: usb create end
2022.11.29 00:08:18.284 0: Featurelevel: 6.1
2022.11.29 00:08:18.284 0: Server started with 96 defined entities (fhem.pl:26248/2022-07-19 perl:5.032001 os:linux user:fhem pid:4483)
2022.11.29 00:08:18.311 3: DbLog logdb - Creating Push-Handle to database mysql:database=fhem;host=192.168.178.210;port=3306 with user fhemuser
2022.11.29 00:08:19.204 3: DbLog logdb - Push-Handle to db mysql:database=fhem;host=192.168.178.210;port=3306 created
2022.11.29 00:08:19.205 3: DbLog logdb - UTF8 support enabled
2022.11.29 00:08:20.097 2: LuftdatenInfo (Luftdaten_BadNenndorf) - SDS011 position differs from other sensor position
2022.11.29 00:08:21.609 3: cul868: Unknown code A06891688BD7782, help me!
2022.11.29 00:08:40.717 3: telnetForBlockingFn_1669676920.71538: port 43217 opened
2022.11.29 00:09:25.706 3: cul868: Unknown code A131200832285DCF000010000DF76DB102BACD552::-102:cul868, help me!
2022.11.29 00:09:50.194 3: cul868: Unknown code A2710008E4487E9B7B1BB000059CCD656F8DFEDE44B2EB7BC6220801DBB5624D938DED23B71B049AC::-95:cul868, help me!
2022.11.29 00:09:50.331 3: cul868: Unknown code A06B7B1BB4487E9, help me!
2022.11.29 00:10:41.178 3: cul868: Unknown code A1714008E4487E92AF409000059CD7E61CB30556165EC1B69::-95:cul868, help me!
2022.11.29 00:13:02.017 3: cul868: Unknown code A1510008E7CD6B8B7B1BB000039F4A81369ED898A8AD3::-100.5:cul868, help me!
2022.11.29 00:13:02.150 3: cul868: Unknown code A06B7B1BB7CD6B8, help me!
2022.11.29 00:13:03.006 3: cul868: Unknown code A131200833DEA8CF000010000AFF6E55BB0282728::-101:cul868, help me!
2022.11.29 00:13:10.872 2: LuftdatenInfo (Luftdaten_BadNenndorf) - SDS011 position differs from other sensor position
2022.11.29 00:13:51.830 3: cul868: Unknown code A13120083458A3EF0000100000547823BC6AD4333::-103:cul868, help me!
2022.11.29 00:14:16.324 3: cul868: Unknown code A13120083AFB19EF0000100042C4B764AE9091E10::-102:cul868, help me!
2022.11.29 00:14:40.075 3: cul868: Unknown code A13120083464A2DF00001000009A7DAC9CC3899C9::-102.5:cul868, help me!
2022.11.29 00:15:44.758 3: cul868: Unknown code A121200834487E9F00001000059D07855603DE8::-95:cul868, help me!
2022.11.29 00:17:34.030 3: cul868: Unknown code A131200834487E9F00001000059D2F5778382FF10::-95:cul868, help me!
2022.11.29 00:19:09.371 3: cul868: Unknown code A131200832285DCF000010000DF77AC59112E0E66::-103:cul868, help me!
2022.11.29 00:23:15.217 3: cul868: Unknown code A1E10008E518020B7B1BB0057E53437459AD3800B1B8A406E770A256B0A4376::-98:cul868, help me!
2022.11.29 00:23:18.524 3: cul868: Unknown code A131200833DEA8CF000010000AFF78B70F39914FD::-103:cul868, help me!
2022.11.29 00:23:48.660 3: cul868: Unknown code A131200836225A4F000010000BEC60D49824A74E5::-100.5:cul868, help me!
2022.11.29 00:24:27.747 3: cul868: Unknown code A13120083AFB19EF0000100042C4CA2D107940000::-102:cul868, help me!
2022.11.29 00:25:41.535 3: cul868: Unknown code A121200834487E9F00001000059D4229FF0421E::-95:cul868, help me!
2022.11.29 00:27:48.751 3: cul868: Unknown code A131200834487E9F00001000059D6D93ADA5D1961::-95:cul868, help me!
2022.11.29 00:28:36.610 3: CUL_HM set KB_Fenster getConfig noArg
2022.11.29 00:29:18.616 3: cul868: Unknown code A131200832285DCF000010000DF786A5982F3DE2B::-102.5:cul868, help me!
2022.11.29 00:31:08.904 3: cul868: Unknown code A1950008F49DAFDF00001000018ED2847C0330A8E14197FC5B115::-108:cul868, help me!
2022.11.29 00:31:43.414 3: cul868: Unknown code A1312008321DECEF000010000E24681D4D455008D::-108:cul868, help me!
2022.11.29 00:33:16.282 3: cul868: Unknown code A131200833DEA8CF000010000AFF8DEE0101D930E::-103:cul868, help me!
2022.11.29 00:34:12.079 3: cul868: Unknown code A131200836225A4F000010000BEC7CAE376EE0103::-101:cul868, help me!
2022.11.29 00:34:29.334 3: cul868: Unknown code A13120083AFB19EF0000100042C4D6E61FE7AFDE9::-101:cul868, help me!
2022.11.29 00:34:30.311 3: cul868: Unknown code A1A1300834487E9F00002000059DA726895C36BE0DF6A9CE0F91308::-95:cul868, help me!
2022.11.29 00:35:09.387 3: cul868: Unknown code A131200832D9BEEF0000100002440F124B40F1C63::-102:cul868, help me!
2022.11.29 00:35:48.289 3: cul868: Unknown code A121200834487E9F00001000059DB4BC9327E99::-95:cul868, help me!
2022.11.29 00:35:52.790 3: cul868: Unknown code A131200837CD6B8F00001000039F52E7DA88B55A3::-101:cul868, help me!
2022.11.29 00:37:15.512 3: cul868: Unknown code A1714008E4487E94E38D7000059DDFAE1520B96991B4159BF::-95:cul868, help me!
2022.11.29 00:37:49.822 3: cul868: Unknown code A131200834487E9F00001000059DE8D7871DD1A90::-95.5:cul868, help me!
2022.11.29 00:39:27.373 3: cul868: Unknown code A131200833BAD69F00001001064CE598ED727E781::-108:cul868, help me!
2022.11.29 00:39:33.443 3: cul868: Unknown code A131200832285DCF000010000DF798955BDE58526::-102:cul868, help me!
2022.11.29 00:39:45.111 3: cul868: Unknown code A2110008E3DEA8CB7B1BB0000AFF9EBCC17726668E824FA955561D61B2BCDB0478BF1::-102.5:cul868, help me!
2022.11.29 00:39:45.201 3: cul868: Unknown code A1E10008E3DEA8CB7B1BB0000AFFAA449E20B4331B773161435C169D5E4CC42::-102:cul868, help me!
2022.11.29 00:39:45.289 3: cul868: Unknown code A2110008E3DEA8CB7B1BB0000AFFB4C98E1A50CB87DAAC60B10910AAA8114E182D117::-102:cul868, help me!
2022.11.29 00:39:47.051 3: cul868: Unknown code A1B10008E2FFD6DB7B1BB0000485EFF8AEA215CF2E0F8ACFDEA5B2B06::-97.5:cul868, help me!
2022.11.29 00:41:18.299 3: cul868: Unknown code A13120083518020F000010057E5359E4A0AB91323::-97.5:cul868, help me!
2022.11.29 00:42:21.215 3: cul868: Unknown code A1B10008E458A3EB7B1BB00000548259BFF654E0315D3BA06A5734D8E::-103.5:cul868, help me!
2022.11.29 00:42:36.764 3: cul868: Unknown code A131200832FFD6DF000010000485FD663A26AC346::-98.5:cul868, help me!
2022.11.29 00:42:36.811 3: cul868: Unknown code A1714008E4487E92FFD6D000059DF3F82222FFDAA36E1DE19::-94.5:cul868, help me!
2022.11.29 00:43:09.218 2: LuftdatenInfo (Luftdaten_BadNenndorf) - SDS011 position differs from other sensor position
2022.11.29 00:43:11.837 3: cul868: Unknown code A131200833DEA8CF000010000AFFC11F8F4C58769::-103.5:cul868, help me!
2022.11.29 00:44:02.401 3: cul868: Unknown code A131200836225A4F000010000BEC8FE4ECF914208::-101:cul868, help me!
2022.11.29 00:44:07.436 3: cul868: Unknown code A13120083AFB19EF0000100042C4E1C3B29247BA4::-100.5:cul868, help me!
2022.11.29 00:45:21.220 3: cul868: Unknown code A121200834487E9F00001000059E1398AD6CF01::-95:cul868, help me!
2022.11.29 00:47:30.560 3: cul868: Unknown code A131200834487E9F00001000059E3F745A1B83B42::-95:cul868, help me!
2022.11.29 00:48:21.229 3: CUL_HM set SZ_Fenster getConfig noArg
2022.11.29 00:48:41.305 3: cul868: Unknown code A06A0D9C3BD7782, help me!
2022.11.29 00:49:20.504 3: cul868: Unknown code A131200832285DCF000010000DF7A4A413710368C::-102:cul868, help me!
2022.11.29 00:49:35.410 3: cul868: Unknown code A1950008F49DAFDF00001000018F50A8E0C54B483E2918E155648::-107:cul868, help me!
2022.11.29 00:50:40.929 3: cul868: Unknown code A1714008E4487E92AF409000059E4A5E9836B63C7001F9086::-95:cul868, help me!
2022.11.29 00:50:46.108 3: cul868: Unknown code A1810008E415AAEB7B1BB000036C8FF2A3DDE55FD69CD7FC984::-102.5:cul868, help me!
2022.11.29 00:50:46.237 3: cul868: Unknown code A06B7B1BB415AAE, help me!
2022.11.29 00:52:51.258 3: cul868: Unknown code A131200833DEA8CF000010000AFFD4AF9FF94DF78::-102.5:cul868, help me!
2022.11.29 00:53:10.211 3: cul868: Unknown code A13120083415AAEF00001000036C9C9AABD48FEE2::-102.5:cul868, help me!
2022.11.29 00:54:06.677 3: cul868: Unknown code A13120083AFB19EF0000100042C4F9AC71BB9291E::-101.5:cul868, help me!
2022.11.29 00:54:36.099 3: cul868: Unknown code A131200836225A4F000010000BEC9BD359056B1AC::-100:cul868, help me!
2022.11.29 00:55:16.093 3: cul868: Unknown code A2110008EAFB19EB7B1BB00042C50EEF49785E30960BABF529157698FAF55DFF6553A::-101:cul868, help me!
2022.11.29 00:55:16.177 3: cul868: Unknown code A1E10008EAFB19EB7B1BB00042C512EE6251EB182493251077F014EC7069CF6::-101:cul868, help me!
2022.11.29 00:55:16.270 3: cul868: Unknown code A2110008EAFB19EB7B1BB00042C5280BFEE04ACAF935B8FA7992F2AE897CD9427BB73::-101:cul868, help me!
2022.11.29 00:55:33.359 3: cul868: Unknown code A121200834487E9F00001000059E70664B2F709::-95:cul868, help me!
2022.11.29 00:56:44.086 3: cul868: Unknown code A1E10008E518020B7B1BB0057E536217AE286A09698A2A3F02F5E87A52E0C08::-97.5:cul868, help me!
2022.11.29 00:56:44.232 3: cul868: Unknown code A06B7B1BB518020, help me!
2022.11.29 00:57:07.279 3: cul868: Unknown code A131200834487E9F00001000059E91F7859E2BD52::-94.5:cul868, help me!
2022.11.29 00:59:38.068 3: cul868: Unknown code A131200832285DCF000010000DF7B001DBD0BAF0D::-102.5:cul868, help me!
2022.11.29 01:00:01.166 3: cul868: Unknown code A1950008F49DAFDF00001000018F96458844CBE4012368EB66008::-109:cul868, help me!
2022.11.29 01:00:38.072 3: cul868: Unknown code A131200833EA3FCF000010000BD2F09E84D391CE4::-108:cul868, help me!
2022.11.29 01:00:38.388 3: cul868: Unknown code A1714008E4487E92AF409000059EA514FCAB80F8B8BE0823B::-94.5:cul868, help me!
2022.11.29 01:02:30.316 3: cul868: Unknown code A131200833DEA8CF000010000AFFE0F53DB5E3EBF::-101.5:cul868, help me!
2022.11.29 01:03:43.644 3: cul868: Unknown code A13120083AFB19EF0000100042C53D27AEB4FD2F3::-102:cul868, help me!
2022.11.29 01:04:09.105 3: cul868: Unknown code A131200836225A4F000010000BECAAC4CE334F097::-101.5:cul868, help me!
2022.11.29 01:04:24.525 3: CUL_HM set SZK_Fenster getConfig noArg
2022.11.29 01:04:51.668 3: cul868: Unknown code A1950008F49DAFDF00001000018FB058935CC4DED900552841B61::-108:cul868, help me!
2022.11.29 01:05:11.010 3: cul868: Unknown code A121200834487E9F00001000059EBEE362AA946::-95:cul868, help me!
2022.11.29 01:05:34.797 3: cul868: Unknown code A1C10008E39AB10B7B1BB00001F8E7DA0EA391D1213E98AB0F88C0E6DBD::-101.5:cul868, help me!
2022.11.29 01:05:34.934 3: cul868: Unknown code A06B7B1BB39AB10, help me!
2022.11.29 01:07:10.659 3: cul868: Unknown code A131200834E38D7F0000100010961A09B082E8B40::-108:cul868, help me!
2022.11.29 01:07:19.196 3: cul868: Unknown code A131200834487E9F00001000059ED65E48602CA8D::-95:cul868, help me!
2022.11.29 01:09:15.755 3: cul868: Unknown code A131200832285DCF000010000DF7C369FD905D2E0::-103.5:cul868, help me!
2022.11.29 01:09:36.441 3: cul868: Unknown code A1714008E4487E96A620D000059EEBC46357D29F3F033FB41::-95:cul868, help me!
2022.11.29 01:10:27.370 3: cul868: Unknown code A131200833EA3FCF000010000BD30FBBE2162CB99::-106.5:cul868, help me!
2022.11.29 01:12:57.884 3: cul868: Unknown code A131200833DEA8CF000010000AFFF122E6A63970C::-103.5:cul868, help me!
2022.11.29 01:13:09.685 2: LuftdatenInfo (Luftdaten_BadNenndorf) - SDS011 position differs from other sensor position
2022.11.29 01:13:15.274 3: cul868: Unknown code A1510008E7CD6B8B7B1BB000039F6AF756E1B925ACB4D::-101:cul868, help me!
2022.11.29 01:13:15.407 3: cul868: Unknown code A06B7B1BB7CD6B8, help me!
2022.11.29 01:13:40.652 3: cul868: Unknown code A13120083AFB19EF0000100042C540052D5BF4ECA::-102.5:cul868, help me!
2022.11.29 01:14:40.113 3: cul868: Unknown code A131200836225A4F000010000BECBCE6CAECF2C4D::-100.5:cul868, help me!
2022.11.29 01:15:07.182 3: cul868: Unknown code A121200834487E9F00001000059F0DD34653B30::-95:cul868, help me!
2022.11.29 01:15:38.860 3: cul868: Unknown code A13120083464A2DF00001000009A825766EF2C533::-104.5:cul868, help me!
2022.11.29 01:15:38.905 3: cul868: Unknown code A1714008E4487E9464A2D000059F17F1E3803D35F2888A93E::-95:cul868, help me!
2022.11.29 01:15:46.550 3: cul868: Unknown code A13120083458A3EF0000100000549FA3C5CF6C221::-103:cul868, help me!
2022.11.29 01:17:31.654 3: cul868: Unknown code A131200834487E9F00001000059F4BDBEBA922D26::-95:cul868, help me!
2022.11.29 01:19:14.874 3: cul868: Unknown code A131200832285DCF000010000DF7DD2BE0BF7FAA5::-102.5:cul868, help me!
2022.11.29 01:20:12.543 3: cul868: Unknown code A1714008E4487E92AF409000059F5AFC2F5A33366175F7CF7::-95:cul868, help me!
2022.11.29 01:21:11.581 3: cul868: Unknown code A1B10008E464A2DB7B1BB000009A977BB81F7953F4213C368B76DBE49::-102.5:cul868, help me!
2022.11.29 01:22:52.059 3: cul868: Unknown code A131200833DEA8CF000010000B00025FE5ADAD357::-102.5:cul868, help me!
2022.11.29 01:24:04.426 3: cul868: Unknown code A13120083AFB19EF0000100042C55551A8F90B1C5::-102:cul868, help me!
2022.11.29 01:24:48.188 3: cul868: Unknown code A131200836225A4F000010000BECCB405125AD051::-101:cul868, help me!
2022.11.29 01:24:53.871 3: cul868: Unknown code A121200834487E9F00001000059F606A70EC884::-95:cul868, help me!
2022.11.29 01:26:23.128 3: cul868: Unknown code A1510008E228E2EB7B1BB000035248B0D78B676BBD702::-107.5:cul868, help me!
2022.11.29 01:27:20.247 3: cul868: Unknown code A06B7B1BB3BAD69, help me!
2022.11.29 01:27:22.874 3: cul868: Unknown code A1C10008E4487E9B7B1BB000059F838C2961305715506DEEDC5A3F78F95::-95:cul868, help me!
2022.11.29 01:27:23.019 3: cul868: Unknown code A06B7B1BB4487E9, help me!
2022.11.29 01:27:29.799 3: cul868: Unknown code A063FB1B821DECE, help me!
2022.11.29 01:27:43.739 3: cul868: Unknown code A1C10008EAFB19EB7B1BB00042C5657A7453A1C9596553FEBD704C0FBFA::-102:cul868, help me!
2022.11.29 01:27:43.876 3: cul868: Unknown code A06B7B1BBAFB19E, help me!
2022.11.29 01:27:46.689 3: cul868: Unknown code A131200834487E9F00001000059F968C357060E71::-95:cul868, help me!
2022.11.29 01:28:19.957 3: cul868: Unknown code A2710008E4487E9B7B1BB000059FAE1CC496CCCF04C6367B33A1BAC416936D4B9308E90AE72AE7662::-94.5:cul868, help me!
2022.11.29 01:28:20.030 3: cul868: Unknown code A06AF6D0C4487E9, help me!
2022.11.29 01:29:47.456 3: cul868: Unknown code A131200832285DCF000010000DF7E16FEEA07130B::-104:cul868, help me!
2022.11.29 01:31:17.674 3: cul868: Unknown code A2010008E4487E9B7B1BB000059FBA015F9694723164C400666FC8D5670958C1547::-95.5:cul868, help me!
2022.11.29 01:31:21.180 3: cul868: Unknown code A2110008E2285DCB7B1BB0000DF7F3F00454EA1BAAE367D4503AE3612A999D8A8B76D::-104:cul868, help me!
2022.11.29 01:31:21.266 3: cul868: Unknown code A1E10008E2285DCB7B1BB0000DF80D34A8700893D2DBDF2A4F148C781164F73::-103:cul868, help me!
2022.11.29 01:31:21.361 3: cul868: Unknown code A2110008E2285DCB7B1BB0000DF81F32C324B38D01567E25E886790E835EECAA12FDE::-102:cul868, help me!
2022.11.29 01:31:24.496 3: cul868: Unknown code A1714008E4487E92FECD4000059FCBDFE49691CA282CFC28E::-94.5:cul868, help me!
2022.11.29 01:32:09.402 3: cul868: Unknown code A1312008321DECEF000010000E24D1823981F2517::-107.5:cul868, help me!
2022.11.29 01:33:15.077 3: cul868: Unknown code A131200833DEA8CF000010000B001572069714386::-102:cul868, help me!
2022.11.29 01:33:44.875 3: cul868: Unknown code A13120083AFB19EF0000100042C578FE672AECE19::-101.5:cul868, help me!
2022.11.29 01:34:36.983 3: cul868: Unknown code A1714008E4487E969A4C3000059FEAB61BFCC2444467D7C13::-94.5:cul868, help me!
2022.11.29 01:34:44.647 3: cul868: Unknown code A131200837CD6B8F00001000039F70D5FE5EB2350::-102:cul868, help me!
2022.11.29 01:35:03.454 3: cul868: Unknown code A131200832D9BEEF0000100002441034861D79B1E::-103:cul868, help me!
2022.11.29 01:35:09.803 3: cul868: Unknown code A121200834487E9F00001000059FFD50A1B9C4C::-95:cul868, help me!
2022.11.29 01:35:20.356 3: cul868: Unknown code A131200836225A4F000010000BECD7F7482B57E48::-101.5:cul868, help me!
2022.11.29 01:38:09.250 3: cul868: Unknown code A131200834487E9F0000100005A021888AD93B444::-95:cul868, help me!
2022.11.29 01:38:49.322 3: cul868: Unknown code A2110008E6225A4B7B1BB0000BECEC59626F9B94CD35D7BB8100AAE851D5674304734::-100.5:cul868, help me!
2022.11.29 01:38:49.408 3: cul868: Unknown code A1E10008E6225A4B7B1BB0000BECF0D2AD35D9C7FFDBA194C34B1B826680D4D::-100:cul868, help me!
2022.11.29 01:38:49.497 3: cul868: Unknown code A2110008E6225A4B7B1BB0000BED0BB6B61389B100B9BAB6F1ADC5F3B40258AA7E399::-101:cul868, help me!
2022.11.29 01:39:40.186 3: cul868: Unknown code A2610008E39AB10B7B1BB00001F8F05CCC9F8957BB6883097F84AE575BCF8C13D4673AA13668A78::-102:cul868, help me!
2022.11.29 01:40:02.347 3: cul868: Unknown code A131200832285DCF000010000DF82A5E29E5F4D53::-102.5:cul868, help me!
2022.11.29 01:40:12.548 3: cul868: Unknown code A1714008E4487E92AF40900005A03147C992D967F6770E300::-95:cul868, help me!
2022.11.29 01:40:27.249 3: cul868: Unknown code A131200833BAD69F00001001064D5366679FA79F7::-108:cul868, help me!
2022.11.29 01:40:57.998 3: cul868: Unknown code A131200833EA3FCF000010000BD36A546F853670E::-107:cul868, help me!
2022.11.29 01:42:30.592 3: cul868: Unknown code A13120083518020F000010057E537653012520D44::-97:cul868, help me!
2022.11.29 01:42:57.839 3: cul868: Unknown code A131200832FFD6DF0000100004860997C66162A2F::-98:cul868, help me!
2022.11.29 01:43:00.429 3: cul868: Unknown code A064C10B0BD7782, help me!
2022.11.29 01:43:10.004 2: LuftdatenInfo (Luftdaten_BadNenndorf) - SDS011 position differs from other sensor position
2022.11.29 01:43:54.414 3: cul868: Unknown code A13120083AFB19EF0000100042C58F5C84B3D5F08::-101:cul868, help me!
2022.11.29 01:45:04.275 3: cul868: Unknown code A131200836225A4F000010000BED1D09E302F210B::-102:cul868, help me!
2022.11.29 01:45:43.510 3: cul868: Unknown code A121200834487E9F0000100005A05EF5B2FDC70::-94.5:cul868, help me!
2022.11.29 01:47:42.687 3: cul868: Unknown code A1950008F49DAFDF000010000190D68CEE7A2766F36A80312E5FE::-106.5:cul868, help me!
2022.11.29 01:47:52.734 3: cul868: Unknown code A131200834487E9F0000100005A07C343F65E06F3::-95:cul868, help me!
2022.11.29 01:48:01.395 3: cul868: Unknown code A0654FADFBD7782, help me!
2022.11.29 01:49:54.117 3: cul868: Unknown code A131200832285DCF000010000DF83455F5AD20E1A::-103:cul868, help me!
2022.11.29 01:50:23.052 3: cul868: Unknown code A2110008E21DECEB7B1BB0000E252B9B6631C56801E02974E74E47C820ADB3A2C0FE8::-105.5:cul868, help me!
2022.11.29 01:50:58.573 3: cul868: Unknown code A131200833EA3FCF000010000BD37A3B7E2541B58::-107.5:cul868, help me!
2022.11.29 01:52:16.065 3: cul868: Unknown code A1312008321DECEF000010000E253609C29CF8573::-107.5:cul868, help me!
2022.11.29 01:52:27.728 3: cul868: Unknown code A1810008E415AAEB7B1BB000036CA38943F029D30BDEDE7AB12::-102.5:cul868, help me!
2022.11.29 01:52:27.864 3: cul868: Unknown code A06B7B1BB415AAE, help me!
2022.11.29 01:52:46.080 3: cul868: Unknown code A131200833DEA8CF000010000B0037FF3CD5668AF::-102:cul868, help me!
2022.11.29 01:53:25.473 3: cul868: Unknown code A13120083AFB19EF0000100042C5922693D872FDF::-101:cul868, help me!
2022.11.29 01:53:25.580 3: cul868: Unknown code A13120083415AAEF00001000036CB28ADD19896E6::-103:cul868, help me!
2022.11.29 01:53:25.630 3: cul868: Unknown code A1714008E4487E9415AAE00005A080C8B3C813B53B45C4368::-94.5:cul868, help me!
2022.11.29 01:55:16.161 3: cul868: Unknown code A131200836225A4F000010000BED219C4EAE3D65D::-101:cul868, help me!
2022.11.29 01:55:40.608 3: cul868: Unknown code A121200834487E9F0000100005A0A4A73F5B987::-95:cul868, help me!
2022.11.29 01:57:44.378 3: cul868: Unknown code A131200834487E9F0000100005A0CA744ED5C5B65::-95:cul868, help me!
2022.11.29 01:59:46.029 3: cul868: Unknown code A1B10008E2FFD6DB7B1BB000048613585CE473D99E85F997C249E9547::-99:cul868, help me!


Steht im Log was kritisches drin? Sonst kann ich die Datei auch komplett hier hochladen.

Otto123

#6
Moin,

ich sehe da jetzt nix.
Aber irgendwie verwirrt mich das, Du zeigst uns doch jetzt nur Einträge wo alles läuft!?
Was zeigt denn das Log aktuell wenn Du den Container startest? Es gibt keinerlei aktuelle Einträge?

Gruß Otto
Viele Grüße aus Leipzig  ⇉  nächster Stammtisch an der Lindennaundorfer Mühle
RaspberryPi B B+ B2 B3 B3+ ZeroW,HMLAN,HMUART,Homematic,Fritz!Box 7590,WRT3200ACS-OpenWrt,Sonos,VU+,Arduino nano,ESP8266,MQTT,Zigbee,deconz

CoolTux

@fhemjan

Was bedeutet denn in Deinen Augen "läuft nicht" genau. Ich kann mich da Otto nur anschließen. FHEM Log enthält aktuelle Daten. Also muss der Container ja laufen.
Kommst Du auf die FHEM Webseite?
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

Otto123

#8
Zitat von: CoolTux am 02 Januar 2023, 08:34:53
FHEM Log enthält aktuelle Daten.
Eben nicht, was er zeigt ist vom 29.November und nicht vom 29. Dezember

Statuscode 500 beim Start vom Container ist unspezifisch. Wenn das alles ist und er dann die Logzeilen vom 29.11. zeigt, sieht mir das aus nach: Containerdefinition ist futsch?
Wie ist der denn definiert?
Viele Grüße aus Leipzig  ⇉  nächster Stammtisch an der Lindennaundorfer Mühle
RaspberryPi B B+ B2 B3 B3+ ZeroW,HMLAN,HMUART,Homematic,Fritz!Box 7590,WRT3200ACS-OpenWrt,Sonos,VU+,Arduino nano,ESP8266,MQTT,Zigbee,deconz

CoolTux

Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

fhemjan

Zitat von: Otto123 am 02 Januar 2023, 08:24:11
Was zeigt denn das Log aktuell wenn Du den Container startest? Es gibt keinerlei aktuelle Einträge?

Richtig, die Einträge in meinem ersten Beitrag sind die Letzten die geschrieben werden. Scheinbar eher ein Docker-Problem wenn FHEM nicht mal ansatzweise gestartet wird?

Zitat von: Otto123 am 02 Januar 2023, 08:43:00
Statuscode 500 beim Start vom Container ist unspezifisch. Wenn das alles ist und er dann die Logzeilen vom 29.11. zeigt, sieht mir das aus nach: Containerdefinition ist futsch?
Wie ist der denn definiert?

Da komm ich grad nicht dran, liefer ich heut Abend nach.

Otto123

Zitat von: fhemjan am 02 Januar 2023, 08:54:33
Scheinbar eher ein Docker-Problem wenn FHEM nicht mal ansatzweise gestartet wird?
Denk ich fast. Ich würde den Container neu machen, klingt dramatischer als es ist. Vorgehen hängt aber von der Definition ab.
Viele Grüße aus Leipzig  ⇉  nächster Stammtisch an der Lindennaundorfer Mühle
RaspberryPi B B+ B2 B3 B3+ ZeroW,HMLAN,HMUART,Homematic,Fritz!Box 7590,WRT3200ACS-OpenWrt,Sonos,VU+,Arduino nano,ESP8266,MQTT,Zigbee,deconz

fhemjan

Ok, dazu heute Abend mehr.
Meinst du es klappt das meine Einstellungen erhalten  bleiben?

fhemjan

#13
Details des Containers:
{
    "AppArmorProfile": "",
    "Args": [
        "start"
    ],
    "Config": {
        "AttachStderr": false,
        "AttachStdin": false,
        "AttachStdout": false,
        "Cmd": [
            "start"
        ],
        "Domainname": "",
        "Entrypoint": [
            "/entry.sh"
        ],
        "Env": [
            "TZ=Europe/Berlin",
            "PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin",
            "LANG=en_US.UTF-8",
            "LANGUAGE=en_US:en",
            "LC_ADDRESS=de_DE.UTF-8",
            "LC_MEASUREMENT=de_DE.UTF-8",
            "LC_MESSAGES=en_DK.UTF-8",
            "LC_MONETARY=de_DE.UTF-8",
            "LC_NAME=de_DE.UTF-8",
            "LC_NUMERIC=de_DE.UTF-8",
            "LC_PAPER=de_DE.UTF-8",
            "LC_TELEPHONE=de_DE.UTF-8",
            "LC_TIME=de_DE.UTF-8",
            "TERM=xterm",
            "LOGFILE=./log/fhem-%Y-%m-%d.log",
            "TELNETPORT=7072",
            "FHEM_PERM_DIR=0750",
            "FHEM_PERM_FILE=0640",
            "UMASK=0037",
            "BLUETOOTH_GID=6001",
            "GPIO_GID=997",
            "I2C_GID=6003",
            "TIMEOUT=10",
            "CONFIGTYPE=fhem.cfg",
            "FHEM_UID=1000",
            "FHEM_GID=1000"
        ],
        "ExposedPorts": {
            "8083/tcp": {}
        },
        "Healthcheck": {
            "Interval": 20000000000,
            "Retries": 5,
            "StartPeriod": 60000000000,
            "Test": [
                "CMD-SHELL",
                "/health-check.sh"
            ],
            "Timeout": 10000000000
        },
        "Hostname": "525198e32cc2",
        "Image": "ghcr.io/fhem/fhem/fhem-docker:bullseye",
        "Labels": {
            "org.fhem.authors": "https://fhem.de/MAINTAINER.txt",
            "org.fhem.description": "FHEM (TM) is a GPL'd perl server for house automation. It is used to automate some common tasks in the household like switching lamps / shutters / heating / etc. and to log events like temperature / humidity / power consumption.",
            "org.fhem.documentation": "https://fhem.de/#Documentation",
            "org.fhem.licenses": "GPL-2.0",
            "org.fhem.revision": "",
            "org.fhem.source": "https://svn.fhem.de/",
            "org.fhem.url": "https://fhem.de/",
            "org.fhem.vendor": "FHEM e.V.",
            "org.fhem.version": "",
            "org.opencontainers.image.authors": "https://github.com/fhem/fhem-docker/graphs/contributors",
            "org.opencontainers.image.created": "2022-05-16T19:37:52.035Z",
            "org.opencontainers.image.description": "A basic Docker image for FHEM house automation system, based on Debian Linux.",
            "org.opencontainers.image.documentation": "https://github.com/fhem/fhem-docker/blob/dbbe3d6d5b5d777e1c7baead0336ec820632920c/README.md",
            "org.opencontainers.image.licenses": "MIT",
            "org.opencontainers.image.revision": "dbbe3d6d5b5d777e1c7baead0336ec820632920c",
            "org.opencontainers.image.source": "https://github.com/fhem/fhem-docker",
            "org.opencontainers.image.title": "fhem-docker",
            "org.opencontainers.image.url": "https://github.com/fhem/fhem-docker",
            "org.opencontainers.image.vendor": "Julian Pawlowski",
            "org.opencontainers.image.version": "bullseye"
        },
        "OnBuild": null,
        "OpenStdin": false,
        "StdinOnce": false,
        "Tty": false,
        "User": "",
        "Volumes": {
            "/opt/fhem": {},
            "/sys/class/gpio": {},
            "/sys/devices/platform": {}
        },
        "WorkingDir": "/opt/fhem"
    },
    "Created": "2022-09-01T18:18:58.111114294Z",
    "Driver": "overlay2",
    "ExecIDs": null,
    "GraphDriver": {
        "Data": {
            "LowerDir": "/var/lib/docker/overlay2/393f66d0b273d3b8afcde751199c3d75fed5e431340f105766a843bf116decc4-init/diff:/var/lib/docker/overlay2/9a0a38ea2996d16d6fc5977c5a14b5cc50429c9d665fbf099b559527196458b7/diff:/var/lib/docker/overlay2/57d0db77ea8110b4800528d648f9910aed25f6f409da56919a8a4fd3c773faad/diff:/var/lib/docker/overlay2/dadc8b7ecd19e7ffc57171a5eddfce64f557c6492d625aedc790767a868b70a9/diff:/var/lib/docker/overlay2/2a8332c287fa08ab1fdc5d4441b5e3e833c883251769975b9d657161d9b1921a/diff:/var/lib/docker/overlay2/f3c66d185575b7ad053c0aaeb89a994b766e41351db2372ff17a8b5567ac2bf6/diff:/var/lib/docker/overlay2/39b0811c6c1d28e85f6fafc3200a8b6351360d823d86a1d121c09998699e4da7/diff:/var/lib/docker/overlay2/255fedc065b547f0268431e720dcdf3c879e7fa0badc6adfc895e7a3add1f72f/diff:/var/lib/docker/overlay2/1b095c1823d931e790db5cc863ab9e33dfabf10183b524de26e1c90858302795/diff:/var/lib/docker/overlay2/7cb91c7fe0f3cc4b17d3ce8ded7ccdc0bd7c4562dfc68c41ed88ecf3cf12f54d/diff:/var/lib/docker/overlay2/93738f85bc0579cb148404d2536d12e0bcfe986dba8a9c6e7f5cd1c0bde2df18/diff:/var/lib/docker/overlay2/fbf05d6515ba2ea283ddc4d690d67bb6c14cafe972abed87dea75b0d64832c9f/diff:/var/lib/docker/overlay2/64ace27737fd54f65bbf26a0c91b9a0e2922150ba0e13f2ff5f0873fd405ea01/diff:/var/lib/docker/overlay2/80c5347a366f63e0df37174f07ea234d4cf76da14c417a0d8a6ee98a8b8b30a5/diff:/var/lib/docker/overlay2/d046a9fa848970968b5bc86213426088128b3b6d0c3abbeb38b8cace5a19438b/diff:/var/lib/docker/overlay2/5dea1060497a3e8138bf6311ec3e0aad2ae5a03982c583a44939a99cf18cc0a4/diff",
            "MergedDir": "/var/lib/docker/overlay2/393f66d0b273d3b8afcde751199c3d75fed5e431340f105766a843bf116decc4/merged",
            "UpperDir": "/var/lib/docker/overlay2/393f66d0b273d3b8afcde751199c3d75fed5e431340f105766a843bf116decc4/diff",
            "WorkDir": "/var/lib/docker/overlay2/393f66d0b273d3b8afcde751199c3d75fed5e431340f105766a843bf116decc4/work"
        },
        "Name": "overlay2"
    },
    "HostConfig": {
        "AutoRemove": false,
        "Binds": [
            "/home/piuser1/docker/fhem:/opt/fhem",
            "/sys/class/gpio:/sys/class/gpio",
            "/sys/devices/platform:/sys/devices/platform"
        ],
        "BlkioDeviceReadBps": null,
        "BlkioDeviceReadIOps": null,
        "BlkioDeviceWriteBps": null,
        "BlkioDeviceWriteIOps": null,
        "BlkioWeight": 0,
        "BlkioWeightDevice": null,
        "CapAdd": [
            "AUDIT_WRITE",
            "CHOWN",
            "DAC_OVERRIDE",
            "FOWNER",
            "FSETID",
            "KILL",
            "MKNOD",
            "NET_BIND_SERVICE",
            "NET_RAW",
            "SETFCAP",
            "SETGID",
            "SETPCAP",
            "SETUID",
            "SYS_CHROOT"
        ],
        "CapDrop": [
            "AUDIT_CONTROL",
            "BLOCK_SUSPEND",
            "DAC_READ_SEARCH",
            "IPC_LOCK",
            "IPC_OWNER",
            "LEASE",
            "LINUX_IMMUTABLE",
            "MAC_ADMIN",
            "MAC_OVERRIDE",
            "NET_ADMIN",
            "NET_BROADCAST",
            "SYSLOG",
            "SYS_ADMIN",
            "SYS_BOOT",
            "SYS_MODULE",
            "SYS_NICE",
            "SYS_PACCT",
            "SYS_PTRACE",
            "SYS_RAWIO",
            "SYS_RESOURCE",
            "SYS_TIME",
            "SYS_TTY_CONFIG",
            "WAKE_ALARM"
        ],
        "Cgroup": "",
        "CgroupParent": "",
        "CgroupnsMode": "private",
        "ConsoleSize": [
            0,
            0
        ],
        "ContainerIDFile": "",
        "CpuCount": 0,
        "CpuPercent": 0,
        "CpuPeriod": 0,
        "CpuQuota": 0,
        "CpuRealtimePeriod": 0,
        "CpuRealtimeRuntime": 0,
        "CpuShares": 0,
        "CpusetCpus": "",
        "CpusetMems": "",
        "DeviceCgroupRules": null,
        "DeviceRequests": null,
        "Devices": [
            {
                "CgroupPermissions": "rwm",
                "PathInContainer": "/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0",
                "PathOnHost": "/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0"
            },
            {
                "CgroupPermissions": "rwm",
                "PathInContainer": "/dev/serial/by-id/usb-busware.de_CUL868-if00",
                "PathOnHost": "/dev/serial/by-id/usb-busware.de_CUL868-if00"
            }
        ],
        "Dns": [],
        "DnsOptions": [],
        "DnsSearch": [],
        "ExtraHosts": [],
        "GroupAdd": null,
        "IOMaximumBandwidth": 0,
        "IOMaximumIOps": 0,
        "Init": false,
        "IpcMode": "private",
        "Isolation": "",
        "KernelMemory": 0,
        "KernelMemoryTCP": 0,
        "Links": null,
        "LogConfig": {
            "Config": {},
            "Type": "json-file"
        },
        "MaskedPaths": [
            "/proc/asound",
            "/proc/acpi",
            "/proc/kcore",
            "/proc/keys",
            "/proc/latency_stats",
            "/proc/timer_list",
            "/proc/timer_stats",
            "/proc/sched_debug",
            "/proc/scsi",
            "/sys/firmware"
        ],
        "Memory": 0,
        "MemoryReservation": 0,
        "MemorySwap": -1,
        "MemorySwappiness": null,
        "NanoCpus": 0,
        "NetworkMode": "fhem-network",
        "OomKillDisable": null,
        "OomScoreAdj": 0,
        "PidMode": "",
        "PidsLimit": null,
        "PortBindings": {
            "8083/tcp": [
                {
                    "HostIp": "",
                    "HostPort": "8083"
                }
            ]
        },
        "Privileged": false,
        "PublishAllPorts": false,
        "ReadonlyPaths": [
            "/proc/bus",
            "/proc/fs",
            "/proc/irq",
            "/proc/sys",
            "/proc/sysrq-trigger"
        ],
        "ReadonlyRootfs": false,
        "RestartPolicy": {
            "MaximumRetryCount": 0,
            "Name": "unless-stopped"
        },
        "Runtime": "runc",
        "SecurityOpt": null,
        "ShmSize": 67108864,
        "UTSMode": "",
        "Ulimits": null,
        "UsernsMode": "",
        "VolumeDriver": "",
        "VolumesFrom": null
    },
    "HostnamePath": "/var/lib/docker/containers/f3276c2a2fe59e8fe7d7bcef59895a6e7729c5fc6bdd69fb3273e0fe03342090/hostname",
    "HostsPath": "/var/lib/docker/containers/f3276c2a2fe59e8fe7d7bcef59895a6e7729c5fc6bdd69fb3273e0fe03342090/hosts",
    "Id": "f3276c2a2fe59e8fe7d7bcef59895a6e7729c5fc6bdd69fb3273e0fe03342090",
    "Image": "sha256:3f929e0caae9feec1a7e52c6e7bc78a985750873f441c46b1b7dfc5f7dd899b5",
    "LogPath": "/var/lib/docker/containers/f3276c2a2fe59e8fe7d7bcef59895a6e7729c5fc6bdd69fb3273e0fe03342090/f3276c2a2fe59e8fe7d7bcef59895a6e7729c5fc6bdd69fb3273e0fe03342090-json.log",
    "MountLabel": "",
    "Mounts": [
        {
            "Destination": "/opt/fhem",
            "Mode": "",
            "Propagation": "rprivate",
            "RW": true,
            "Source": "/home/piuser1/docker/fhem",
            "Type": "bind"
        },
        {
            "Destination": "/sys/class/gpio",
            "Mode": "",
            "Propagation": "rprivate",
            "RW": true,
            "Source": "/sys/class/gpio",
            "Type": "bind"
        },
        {
            "Destination": "/sys/devices/platform",
            "Mode": "",
            "Propagation": "rprivate",
            "RW": true,
            "Source": "/sys/devices/platform",
            "Type": "bind"
        }
    ],
    "Name": "/fhem2",
    "NetworkSettings": {
        "Bridge": "",
        "EndpointID": "",
        "Gateway": "",
        "GlobalIPv6Address": "",
        "GlobalIPv6PrefixLen": 0,
        "HairpinMode": false,
        "IPAddress": "",
        "IPPrefixLen": 0,
        "IPv6Gateway": "",
        "LinkLocalIPv6Address": "",
        "LinkLocalIPv6PrefixLen": 0,
        "MacAddress": "",
        "Networks": {
            "fhem-network": {
                "Aliases": [
                    "525198e32cc2",
                    "f3276c2a2fe5"
                ],
                "DriverOpts": null,
                "EndpointID": "",
                "Gateway": "",
                "GlobalIPv6Address": "",
                "GlobalIPv6PrefixLen": 0,
                "IPAMConfig": {},
                "IPAddress": "",
                "IPPrefixLen": 0,
                "IPv6Gateway": "",
                "Links": null,
                "MacAddress": "",
                "NetworkID": "5ca1b7c73c4640168d81c4574c2cac1c656caf0b1111f3ccaf4f6751e84437b5"
            }
        },
        "Ports": {},
        "SandboxID": "92d562ee449c6a268be2ca6dd7d3dc95d61280d3eea2ef89e4dc1f79221b73c4",
        "SandboxKey": "/var/run/docker/netns/92d562ee449c",
        "SecondaryIPAddresses": null,
        "SecondaryIPv6Addresses": null
    },
    "Path": "/entry.sh",
    "Platform": "linux",
    "Portainer": {
        "ResourceControl": {
            "Id": 79,
            "ResourceId": "f3276c2a2fe59e8fe7d7bcef59895a6e7729c5fc6bdd69fb3273e0fe03342090",
            "SubResourceIds": [],
            "Type": 1,
            "UserAccesses": [],
            "TeamAccesses": [],
            "Public": false,
            "AdministratorsOnly": true,
            "System": false
        }
    },
    "ProcessLabel": "",
    "ResolvConfPath": "/var/lib/docker/containers/f3276c2a2fe59e8fe7d7bcef59895a6e7729c5fc6bdd69fb3273e0fe03342090/resolv.conf",
    "RestartCount": 0,
    "State": {
        "Dead": false,
        "Error": "error gathering device information while adding custom device \"/dev/serial/by-id/usb-busware.de_CUL868-if00\": no such file or directory",
        "ExitCode": 137,
        "FinishedAt": "2022-11-29T23:00:17.896216517Z",
        "Health": {
            "FailingStreak": 0,
            "Log": [
                {
                    "End": "2022-11-29T23:58:48.197376527+01:00",
                    "ExitCode": 0,
                    "Output": "Telnet(7072): OK; WEB(8083): OK; DockerImageInfo:OK;",
                    "Start": "2022-11-29T23:58:47.024149708+01:00"
                },
                {
                    "End": "2022-11-29T23:59:09.391766615+01:00",
                    "ExitCode": 0,
                    "Output": "Telnet(7072): OK; WEB(8083): OK; DockerImageInfo:OK;",
                    "Start": "2022-11-29T23:59:08.211373891+01:00"
                },
                {
                    "End": "2022-11-29T23:59:30.598863096+01:00",
                    "ExitCode": 0,
                    "Output": "Telnet(7072): OK; WEB(8083): OK; DockerImageInfo:OK;",
                    "Start": "2022-11-29T23:59:29.406075972+01:00"
                },
                {
                    "End": "2022-11-29T23:59:51.82048944+01:00",
                    "ExitCode": 0,
                    "Output": "Telnet(7072): OK; WEB(8083): OK; DockerImageInfo:OK;",
                    "Start": "2022-11-29T23:59:50.612681918+01:00"
                },
                {
                    "End": "2022-11-30T00:00:12.998936991+01:00",
                    "ExitCode": 0,
                    "Output": "Telnet(7072): OK; WEB(8083): OK; DockerImageInfo:OK;",
                    "Start": "2022-11-30T00:00:11.833976431+01:00"
                }
            ],
            "Status": "unhealthy"
        },
        "OOMKilled": false,
        "Paused": false,
        "Pid": 0,
        "Restarting": false,
        "Running": false,
        "StartedAt": "2022-11-28T23:07:06.073253796Z",
        "Status": "exited"
    }
}


Edit: Ich bin gerade über den Error bei der Einbindung des cul868 gestolpert. Ich habe die Verlinkung des Devices aus dem Container genommen und einen Duplikat gemacht. --> Es läuft wieder!! :D Scheinbar insgesamt echt ein Problem mit dem cul868...
Somit bahnfrei für das Projekt HM-MOD-RPI-PCB :)

Vielen, vielen Dank an alle!

Otto123

Zitat"Error": "error gathering device information while adding custom device \"/dev/serial/by-id/usb-busware.de_CUL868-if00\": no such file or directory",
Ihm fehlt der USB Stick?

Aber ich meine: Du hast den seit dem 29.11. nie wieder gestartet?

Du hast den Container mal ursprünglich mit einer Kommandozeile definiert? Von docker compose sehe ich irgendwie nix. Oder ist das im portainer zusammengeklickt?
Viele Grüße aus Leipzig  ⇉  nächster Stammtisch an der Lindennaundorfer Mühle
RaspberryPi B B+ B2 B3 B3+ ZeroW,HMLAN,HMUART,Homematic,Fritz!Box 7590,WRT3200ACS-OpenWrt,Sonos,VU+,Arduino nano,ESP8266,MQTT,Zigbee,deconz