Moin liebe Leute,
ich habe beim aufräumen ein 3er Set Funksteckdosen (433Mhz) aus der Vorkriegszeit gefunden ;D
Wollte dieses direkt ausprobieren und schauen, ob ich via FHEM und meinem SIGNALduino etwas erreichen kann.
Steckdosen: FHT-7901 (http://www.diw-punkt.de/FHT-7901/FHT-7901-S3.html)
Die Steckdosen konnte ich erfolgreich in FHEM anlegen.
In diesem Fall die Steckdose mit der Beschriftung "A".
Internals:
00 0f
CFGFN
DEF f11110ffff f0 0f
IODev SIGNALduino
LASTInputDev SIGNALduino
MSGCNT 16
NAME IT_Steckdose_A
NR 110863
SIGNALduino_DMSG i7FC551
SIGNALduino_MSGCNT 13
SIGNALduino_RAWMSG MS;P1=158;P2=-607;P3=544;P4=-215;P5=-5916;D=15123434343434343434341212123412341234123412121234;CP=1;SP=5;
SIGNALduino_TIME 2018-08-22 20:15:41
STATE off
TYPE IT
XMIT f11110ffff
XMITdimdown 00
XMITdimup 00
XMITon f0
nanoCUL_MSGCNT 3
nanoCUL_RAWMSG i7fc554
nanoCUL_RSSI -69
nanoCUL_TIME 2018-08-22 20:14:55
CODE:
1 f11110ffff
READINGS:
2018-08-22 22:15:01 protocol V1
2018-08-22 20:15:41 state off
Attributes:
DbLogExclude .*
IODev SIGNALduino
model itswitch
room IT
Wenn ich die Steckdose nun via Handfernbedienung schalte (egal ob An / Aus) ändert sich in FHEM auch brav der Status.
Jedoch kann ich via "on" / "off" per FHEM die Steckdose nicht schalten.
Habe ich irgendwelche Einstellungen vergessen / falsch vorgenommen?
Gruß
Mathze
Hi,
Schau mal ob die ITRepetition auf 6-10 ändern hilft, ansonsten könnte der ITClock in 10er Schritten von 120 bis 200 testen.
Die Frequenz ist richtig auf 433.920 MHz?
Gruß Arnd
Raspi2 mit FHEM, CUL, Signalduino, MySensors, HomeBridge, Presence, Bravia, ...
Moin Arnd, habe beides durchprobiert, leider ohne Erfolg.
Hier noch ein List von meinem SIGNALduino:
Internals:
Clients :IT:CUL_TCM97001:SD_RSL:OREGON:CUL_TX:SD_AS:Hideki:SD_WS07:SD_WS09: :SD_WS:RFXX10REC:Dooya:SOMFY:SD_UT:SD_WS_Maverick:FLAMINGO:CUL_WS:Revolt: :FS10:CUL_FHTTK:Siro:FHT:FS20:SIGNALduino_un:
DEF /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A9S775D9-if00-port0@57600
DMSG 501A2D1071802390453897
DevState initialized
DeviceName /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A9S775D9-if00-port0@57600
FD 21
ITClock 250
LASTDMSG 501A2D1071802390453897
MSGCNT 79595
NAME SIGNALduino
NR 724
NR_CMD_LAST_H 67
PARTIAL
RAWMSG MC;LL=-1018;LH=936;SL=-529;SH=446;D=AAAAAAAA66959A65559595A95556A5655596995956A5A996;C=488;L=191;
STATE opened
TIME 1535054148.50977
TYPE SIGNALduino
sendworking 0
unknownmessages
version V 3.3.1-dev SIGNALduino - compiled at Jan 3 2017 23:59:32
versionmodul v3.3.3-dev_20.04.
DoubleMsgIDs:
MatchList:
10:SD_WS07 ^P7#[A-Fa-f0-9]{6}F[A-Fa-f0-9]{2}(#R[A-F0-9][A-F0-9]){0,1}$
11:SD_WS09 ^P9#F[A-Fa-f0-9]+
12:SD_WS ^W\d+x{0,1}#.*
13:RFXX10REC ^(20|29)[A-Fa-f0-9]+
14:Dooya ^P16#[A-Fa-f0-9]+
15:SOMFY ^Ys[0-9A-F]+
16:SD_WS_Maverick ^P47#[A-Fa-f0-9]+
17:SD_UT ^u30#.*
18:FLAMINGO ^P13#[A-Fa-f0-9]+
19:CUL_WS ^K[A-Fa-f0-9]{5,}
1:IT ^i......
20:Revolt ^r[A-Fa-f0-9]{22}
21:FS10 ^P61#[A-F0-9]+
22:Siro ^P72#[A-Fa-f0-9]+
23:FHT ^81..(04|09|0d)..(0909a001|83098301|c409c401)..
24:FS20 ^81..(04|0c)..0101a001
2:CUL_TCM97001 ^s[A-Fa-f0-9]+
3:SD_RSL ^P1#[A-Fa-f0-9]{8}
4:OREGON ^(3[8-9A-F]|[4-6][0-9A-F]|7[0-8]).*
5:CUL_TX ^TX..........
6:SD_AS ^P2#[A-Fa-f0-9]{7,8}
7:Hideki ^P12#75[A-F0-9]+
9:CUL_FHTTK ^T[A-F0-9]{8}
X:SIGNALduino_un ^[u]\d+#.*
QUEUE:
READINGS:
2018-08-10 17:11:14 cmds V i R t X F S P C G
2018-08-10 17:11:18 config MS=0;MU=0;MC=0
2018-08-10 17:11:23 freeram 1018
2018-08-11 13:32:49 ping OK
2018-08-16 17:07:26 state opened
2018-08-11 11:29:38 uptime 0 18:26:06
2018-08-16 17:07:26 version V 3.3.1-dev SIGNALduino - compiled at Jan 3 2017 23:59:32
XMIT_TIME:
1535053609.94298
1535053639.27353
1535053648.44237
1535053652.79548
1535053656.50632
1535053656.8865
1535053695.39448
1535053698.77265
1535053712.17392
1535053719.00748
1535053719.57615
1535053729.23723
1535053731.12881
1535053733.82577
1535053739.36128
1535053743.10987
1535053754.75329
1535053758.42215
1535053760.05307
1535053761.69163
1535053769.29887
1535053771.52534
1535053773.41633
1535053776.79961
1535053840.7371
1535053845.43469
1535053846.91765
1535053849.54763
1535053858.13564
1535053860.41007
1535053862.30743
1535053864.63908
1535053872.03632
1535053873.76464
1535053875.65358
1535053876.99131
1535053886.43427
1535053889.28401
1535053891.04579
1535053892.91007
1535053894.2019
1535053895.67996
1535053901.88739
1535053903.41693
1535053904.455
1535053908.62181
1535053908.92647
1535053913.23953
1535053914.91001
1535053930.51656
1535053933.71946
1535053965.04603
1535053975.1263
1535053977.72965
1535053979.00344
1535053990.89784
1535053992.59059
1535054006.02258
1535054009.86009
1535054012.67131
1535054013.86733
1535054036.9854
1535054042.09694
1535054134.54963
1535054140.48029
1535054142.20762
1535054143.92254
getcmd:
keepalive:
ok 1
retry 0
mcIdList:
10
11
12
18
43
47
52
57
58
msIdList:
0
1
2
3
3.1
4
6
7
13
13.2
14
15
17
22
23
25
32
33
35
38
41
51
55
65
68
72.1
muIdList:
5
8
9
13.1
16
20
21
24
26
27
28
29
30
31
36
37
39
40
44
44.1
45
46
48
49
50
56
59
60
61
62
64
66
67
69
70
71
72
75
79
Attributes:
DbLogExclude .*
flashCommand avrdude -c arduino -b [BAUDRATE] -P [PORT] -p atmega328p -vv -U flash:w:[HEXFILE] 2>[LOGFILE]
hardware nano328
room SIGNALduino
verbose 2
Muss ich hier irgendwo noch Einstellungen vornehmen?
Wie gesagt, wenn ich per Fernbedienung eine Taste drücke, wird dies korrekt innerhalb von FHEM angezeigt, nur schalten aus FHEM heraus geht nicht.
Auf der Rückseite des Handsenders steht:
Frequency 433.05-434.79MHz
???
Ich habe auch noch einen nanoCUL im Einsatz:
Internals:
CMDS ABCeFfGiKLlMNRTtUVWXx
Clients :FS20:FHT.*:KS300:USF1000:BS:HMS: :CUL_EM:CUL_WS:CUL_FHTTK:CUL_HOERMANN: :ESA2000:CUL_IR:CUL_TX:Revolt:IT:UNIRoll:SOMFY: :STACKABLE_CC:TSSTACKED:STACKABLE:CUL_RFR::CUL_TCM97001:CUL_REDIRECT::OREGON::Hideki::SD_WS07:
DEF /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0@38400 1234
DeviceName /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0@38400
FD 10
FHTID 1234
NAME nanoCUL
NR 29
PARTIAL
RAWMSG omAAAAAAAAAA13
RSSI -69.5
STATE Initialized
TIME 1535054711.63453
TYPE CUL
VERSION V 1.23.04 a-culfw Build: private build (unknown) nanoCUL433 (F-Band: 433MHz)
initString X21
nanoCUL_MSGCNT 165314
nanoCUL_TIME 2018-08-23 22:05:32
Helper:
DBLOG:
raw:
myDbLog:
TIME 1535054480.99657
VALUE isF11110FFFF0F
state:
myDbLog:
TIME 1535054482.02058
VALUE UNKNOWNCODE 6
MatchList:
1:USF1000 ^81..(04|0c)..0101a001a5ceaa00....
2:BS ^81..(04|0c)..0101a001a5cf
3:FS20 ^81..(04|0c)..0101a001
4:FHT ^81..(04|09|0d)..(0909a001|83098301|c409c401)..
5:KS300 ^810d04..4027a001
6:CUL_WS ^K.....
7:CUL_EM ^E0.................$
8:HMS ^810e04......a001
9:CUL_FHTTK ^T[A-F0-9]{8}
A:CUL_RFR ^[0-9A-F]{4}U.
B:CUL_HOERMANN ^R..........
C:ESA2000 ^S................................$
C:Hideki ^P12#75[A-F0-9]{17,30}
C:OREGON ^(3[8-9A-F]|[4-6][0-9A-F]|7[0-8]).*
C:SD_WS07 ^P7#[A-Fa-f0-9]{6}F[A-Fa-f0-9]{2}
D:CUL_IR ^I............
E:CUL_TX ^TX[A-F0-9]{10}
F:Revolt ^r......................$
G:IT ^i......
H:STACKABLE_CC ^\*
I:UNIRoll ^[0-9A-F]{5}(B|D|E)
J:SOMFY ^Y[r|t|s]:?[A-F0-9]+
K:CUL_TCM97001 ^s[A-F0-9]+
L:CUL_REDIRECT ^o+
M:TSSTACKED ^\*
N:STACKABLE ^\*
READINGS:
2018-08-16 17:06:57 cmds A B C e F f G i K L l M N R T t U V W X x
2018-08-23 22:01:20 raw isF11110FFFF0F
2018-08-23 22:05:32 state Initialized
2018-08-09 22:51:25 version V 1.23.04 a-culfw Build: private build (unknown) nanoCUL433 (F-Band: 433MHz)
Attributes:
room nanoCUL
verbose 0
Augenscheinlich versuchen beide CUL's die Steckdose auszuschalten, laut Log:
2018.08.23 22:03:40 3: SIGNALduino IT_set: IT_Steckdose_A on
2018.08.23 22:03:41 3: nanoCUL IT: IT_Steckdose_A on->on
2018.08.23 22:04:50 3: SIGNALduino IT_set: IT_Steckdose_A off
2018.08.23 22:04:50 3: nanoCUL IT: IT_Steckdose_A off->off
Wobei als IODev eindeutig nur mein SIGNALduino eingetragen ist!
Gruß
Mathze
Hi
Nee das heißt der nanoCUL hört das ausschalten per Dunk vom Signalduino.
Wenn du verbose auf 4 bei beiden gateways hochstellst, siehst Du es genauer.
Kannst Du auch noch die logs zeigen wenn Du per FB die Taste on und off drückst und dann per Signalduino pn und off?
Gruß Arnd
Raspi2 mit FHEM, CUL, Signalduino, MySensors, HomeBridge, Presence, Bravia, ...
Gut, habe mal auf verbose 4 gestellt und folgendes mitgeloggt:
An / Aus via Fernbedienung:
2018.08.24 20:06:04 4: SIGNALduino/msg READ: MS;P1=473;P2=-1970;P3=-3922;P5=-8572;D=15121313121212131213121312121212121313121313131212121312121312131314;CP=1;SP=5;O;
2018.08.24 20:06:04 4: SIGNALduino: Matched MS Protocol id 0 -> weather1
2018.08.24 20:06:04 4: SIGNALduino: Decoded MS Protocol id 0 dmsg s62A0DC4B00 length 32
2018.08.24 20:06:04 4: SIGNALduino: Matched MS Protocol id 68 -> PFR-130
2018.08.24 20:06:04 4: SIGNALduino: Decoded MS Protocol id 68 dmsg s62A0DC4B00 length 32
2018.08.24 20:06:04 4: SIGNALduino Dispatch: s62A0DC4B00, Dropped due to short time or equal msg
2018.08.24 20:06:06 4: SIGNALduino/msg READ: MS;P0=-1975;P1=475;P2=-3922;P4=-8567;D=14101212101010121012101210101010101212101212121010101210101210121215;CP=1;SP=4;
2018.08.24 20:06:06 4: SIGNALduino: Matched MS Protocol id 0 -> weather1
2018.08.24 20:06:06 4: SIGNALduino: Decoded MS Protocol id 0 dmsg s62A0DC4B00 length 32
2018.08.24 20:06:06 4: SIGNALduino: Matched MS Protocol id 68 -> PFR-130
2018.08.24 20:06:06 4: SIGNALduino: Decoded MS Protocol id 68 dmsg s62A0DC4B00 length 32
2018.08.24 20:06:06 4: SIGNALduino Dispatch: s62A0DC4B00, Dropped due to short time or equal msg
2018.08.24 20:06:10 4: SIGNALduino/keepalive ok, retry = 0
2018.08.24 20:06:10 4: SIGNALduino/msg READ: MU;P0=-32001;P1=146;P2=-609;P3=524;P4=-236;P5=-5971;P6=220;D=01234343434343434343412121234123412341234123412121534343264343434343412121234123412341234123412121512343434343434343434121212341234123412341234121215123434343434343434341212123412341234123412341212151234343434343434343412121234123412341234123412121512343;CP=1;O;
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 20 -> livolo matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 24 -> visivon remote matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 29 -> HT12e remote matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 37 -> Bresser 7009994 matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 40 -> romotec matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 45 -> Revolt matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 56 -> Celexon matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 61 -> FS10 matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 62 -> Clarus_Switch matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: decoded matched MU Protocol id 62 dmsg i7FC554 length 24
2018.08.24 20:06:10 4: SIGNALduino IT: message "i7FC554" (7)
2018.08.24 20:06:10 4: SIGNALduino IT: msgcode "F11110FFFFF0" (12) bin = 011111111100010101010100
2018.08.24 20:06:10 3: SIGNALduino IT: IT_Steckdose_A off->on
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 69 -> Hoermann matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 70 -> FHT80TF matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 72 -> Siro shutter matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 79 -> VTX-BELL_Funkklingel matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino/msg READ: MU;P0=-204;P1=562;P2=-128;P3=175;P4=-581;P5=-1268;D=01010101010101012343434103410341034103410343435;CP=3;
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 24 -> visivon remote matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 29 -> HT12e remote matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 36 -> socket36 matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 37 -> Bresser 7009994 matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 39 -> X10 Protocol matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 49 -> quigg_gt9000 matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 56 -> Celexon matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 61 -> FS10 matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 62 -> Clarus_Switch matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 69 -> Hoermann matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 70 -> FHT80TF matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 72 -> Siro shutter matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino: Fingerprint for MU Protocol id 79 -> VTX-BELL_Funkklingel matches, trying to demodulate
2018.08.24 20:06:10 4: SIGNALduino/msg READ: MS;P0=151;P2=532;P3=-230;P4=-606;P5=-5919;D=05042323232323232323230404042304230423042304230404;CP=0;SP=5;O;
2018.08.24 20:06:10 4: SIGNALduino: Matched MS Protocol id 3.1 -> itv1_sync40
2018.08.24 20:06:10 4: SIGNALduino: Decoded MS Protocol id 3.1 dmsg i7FC554 length 24
2018.08.24 20:06:10 4: SIGNALduino Dispatch: i7FC554, Dropped due to short time or equal msg
2018.08.24 20:06:10 4: SIGNALduino/msg READ: MS;P0=161;P1=-2141;P2=491;P3=-239;P4=-596;P5=-5920;P6=-1400;P7=112;D=01230423042304230404050423232323232323232306047104;CP=0;SP=1;
2018.08.24 20:06:10 4: SIGNALduino: Matched MS Protocol id 3.1 -> itv1_sync40
2018.08.24 20:06:10 4: SIGNALduino/msg READ: MS;P0=-5917;P1=156;P2=-227;P3=537;P4=-599;D=10143232323232323232321414143214321432143214321414;CP=1;SP=0;O;
2018.08.24 20:06:10 4: SIGNALduino: Matched MS Protocol id 3.1 -> itv1_sync40
2018.08.24 20:06:10 4: SIGNALduino: Decoded MS Protocol id 3.1 dmsg i7FC554 length 24
2018.08.24 20:06:10 4: SIGNALduino Dispatch: i7FC554, Dropped due to short time or equal msg
2018.08.24 20:06:10 4: SIGNALduino/msg READ: MS;P0=151;P1=-608;P2=530;P3=-232;P4=-5921;D=04012323232323232323230101012301230123012301230101;CP=0;SP=4;O;
2018.08.24 20:06:10 4: SIGNALduino: Matched MS Protocol id 3.1 -> itv1_sync40
2018.08.24 20:06:10 4: SIGNALduino: Decoded MS Protocol id 3.1 dmsg i7FC554 length 24
2018.08.24 20:06:10 4: SIGNALduino Dispatch: i7FC554, Dropped due to short time or equal msg
2018.08.24 20:06:10 4: SIGNALduino/msg READ: MC;LL=-995;LH=962;SL=-506;SH=466;D=AAAAAAAA66959A6555656AA65555656555;C=488;L=136;
2018.08.24 20:06:10 4: SIGNALduino: Found manchester Protocol id 10 clock 488 -> OSV2o3
2018.08.24 20:06:10 4: SIGNALduino: OSV2 protocol detected: preamble_pos = 32
2018.08.24 20:06:10 4: SIGNALduino: Found manchester Protocol id 12 clock 488 -> Hideki protocol
2018.08.24 20:06:10 4: SIGNALduino: hideki start pattern (10101110) not found
2018.08.24 20:06:10 4: SIGNALduino: Found manchester Protocol id 52 clock 488 -> OS_PIR
2018.08.24 20:06:10 4: SIGNALduino: Found manchester Protocol id 58 clock 488 -> tfa 30.3208.0
2018.08.24 20:06:10 4: SIGNALduino/msg READ: MC;LL=-984;LH=970;SL=-497;SH=479;D=6959599AA55596;C=488;L=55;
2018.08.24 20:06:10 4: SIGNALduino: Found manchester Protocol id 52 clock 488 -> OS_PIR
2018.08.24 20:06:10 4: SIGNALduino: Found manchester Protocol id 58 clock 488 -> tfa 30.3208.0
2018.08.24 20:06:10 4: SIGNALduino/msg READ: MC;LL=-982;LH=985;SL=-480;SH=485;D=6A955658;C=488;L=29;
2018.08.24 20:06:10 4: SIGNALduino: Found manchester Protocol id 52 clock 488 -> OS_PIR
2018.08.24 20:06:13 4: SIGNALduino/msg READ: MS;P1=478;P2=-3922;P3=-1968;P5=-8567;D=15121313131213121212131313131313131213121312131212131213131313131214;CP=1;SP=5;O;
2018.08.24 20:06:13 4: SIGNALduino: Matched MS Protocol id 0 -> weather1
2018.08.24 20:06:13 4: SIGNALduino: Decoded MS Protocol id 0 dmsg s8B80AB4100 length 32
2018.08.24 20:06:13 4: SIGNALduino: Matched MS Protocol id 68 -> PFR-130
2018.08.24 20:06:13 4: SIGNALduino: Decoded MS Protocol id 68 dmsg s8B80AB4100 length 32
2018.08.24 20:06:13 4: SIGNALduino Dispatch: s8B80AB4100, Dropped due to short time or equal msg
2018.08.24 20:06:13 4: SIGNALduino/msg READ: MU;P0=-2224;P1=470;P2=-3927;P3=-508;P4=-8568;P5=148;D=01210101010101213141210101012101212121050;CP=1;
2018.08.24 20:06:13 4: SIGNALduino: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2018.08.24 20:06:13 4: SIGNALduino: Fingerprint for MU Protocol id 13.1 -> FLAMINGO FA21 / LM-101LD matches, trying to demodulate
2018.08.24 20:06:13 4: SIGNALduino: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2018.08.24 20:06:13 4: SIGNALduino: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2018.08.24 20:06:13 4: SIGNALduino: Fingerprint for MU Protocol id 37 -> Bresser 7009994 matches, trying to demodulate
2018.08.24 20:06:13 4: SIGNALduino: Fingerprint for MU Protocol id 39 -> X10 Protocol matches, trying to demodulate
2018.08.24 20:06:13 4: SIGNALduino: Fingerprint for MU Protocol id 61 -> FS10 matches, trying to demodulate
2018.08.24 20:06:13 4: SIGNALduino: Fingerprint for MU Protocol id 70 -> FHT80TF matches, trying to demodulate
2018.08.24 20:06:13 4: SIGNALduino: Fingerprint for MU Protocol id 72 -> Siro shutter matches, trying to demodulate
2018.08.24 20:06:13 4: SIGNALduino: Fingerprint for MU Protocol id 79 -> VTX-BELL_Funkklingel matches, trying to demodulate
2018.08.24 20:06:13 4: SIGNALduino/msg READ: MS;P0=-8576;P1=476;P2=-3926;P3=-1971;P5=-31836;D=101213131312131212121313131313131312131213121312121312131313131312151;CP=1;SP=0;
2018.08.24 20:06:13 4: SIGNALduino: Matched MS Protocol id 0 -> weather1
2018.08.24 20:06:13 4: SIGNALduino: Decoded MS Protocol id 0 dmsg s8B80AB4100 length 32
2018.08.24 20:06:13 4: SIGNALduino Dispatch: s8B80AB4100, Dropped due to short time or equal msg
2018.08.24 20:06:13 4: SIGNALduino: Matched MS Protocol id 68 -> PFR-130
2018.08.24 20:06:13 4: SIGNALduino: Decoded MS Protocol id 68 dmsg s8B80AB4100 length 32
2018.08.24 20:06:13 4: SIGNALduino Dispatch: s8B80AB4100, Dropped due to short time or equal msg
2018.08.24 20:06:14 4: SIGNALduino/msg READ: MS;P0=-603;P1=534;P2=-226;P3=156;P4=-5920;D=34301212121212121212123030301230123012301230303012;CP=3;SP=4;O;
2018.08.24 20:06:14 4: SIGNALduino: Matched MS Protocol id 3.1 -> itv1_sync40
2018.08.24 20:06:14 4: SIGNALduino: Decoded MS Protocol id 3.1 dmsg i7FC551 length 24
2018.08.24 20:06:14 4: SIGNALduino IT: message "i7FC551" (7)
2018.08.24 20:06:14 4: SIGNALduino IT: msgcode "F11110FFFF0F" (12) bin = 011111111100010101010001
2018.08.24 20:06:14 3: SIGNALduino IT: IT_Steckdose_A on->off
2018.08.24 20:06:14 4: SIGNALduino/msg READ: MU;P0=-605;P1=537;P2=-224;P3=154;P4=-5924;P5=-1548;P6=380;P7=-2254;D=0123012303030123430121212121212121212303562376237;CP=3;
2018.08.24 20:06:14 4: SIGNALduino: Fingerprint for MU Protocol id 13.1 -> FLAMINGO FA21 / LM-101LD matches, trying to demodulate
2018.08.24 20:06:14 4: SIGNALduino: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate
2018.08.24 20:06:14 4: SIGNALduino: Fingerprint for MU Protocol id 20 -> livolo matches, trying to demodulate
2018.08.24 20:06:14 4: SIGNALduino: Fingerprint for MU Protocol id 24 -> visivon remote matches, trying to demodulate
2018.08.24 20:06:14 4: SIGNALduino: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2018.08.24 20:06:14 4: SIGNALduino: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2018.08.24 20:06:14 4: SIGNALduino: Fingerprint for MU Protocol id 29 -> HT12e remote matches, trying to demodulate
2018.08.24 20:06:14 4: SIGNALduino: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2018.08.24 20:06:14 4: SIGNALduino: Fingerprint for MU Protocol id 36 -> socket36 matches, trying to demodulate
2018.08.24 20:06:14 4: SIGNALduino: Fingerprint for MU Protocol id 37 -> Bresser 7009994 matches, trying to demodulate
2018.08.24 20:06:14 4: SIGNALduino: Fingerprint for MU Protocol id 39 -> X10 Protocol matches, trying to demodulate
2018.08.24 20:06:14 4: SIGNALduino: Fingerprint for MU Protocol id 49 -> quigg_gt9000 matches, trying to demodulate
2018.08.24 20:06:14 4: SIGNALduino: Fingerprint for MU Protocol id 56 -> Celexon matches, trying to demodulate
2018.08.24 20:06:14 4: SIGNALduino: Fingerprint for MU Protocol id 61 -> FS10 matches, trying to demodulate
2018.08.24 20:06:14 4: SIGNALduino: Fingerprint for MU Protocol id 62 -> Clarus_Switch matches, trying to demodulate
2018.08.24 20:06:14 4: SIGNALduino: Fingerprint for MU Protocol id 69 -> Hoermann matches, trying to demodulate
2018.08.24 20:06:14 4: SIGNALduino: Fingerprint for MU Protocol id 70 -> FHT80TF matches, trying to demodulate
2018.08.24 20:06:14 4: SIGNALduino: Fingerprint for MU Protocol id 72 -> Siro shutter matches, trying to demodulate
2018.08.24 20:06:14 4: SIGNALduino: Fingerprint for MU Protocol id 79 -> VTX-BELL_Funkklingel matches, trying to demodulate
An / Aus via FHEM
2018.08.24 20:07:04 3: SIGNALduino IT_set: IT_Steckdose_A on
2018.08.24 20:07:04 4: SIGNALduino/set: sending via SendMsg: SR;R=6;P0=250;P1=-7750;P2=750;P3=-250;P4=-750;D=01042323232323232323230404042304230423042304230404;
2018.08.24 20:07:04 4: SIGNALduino SendrawFromQueue: msg=SR;R=6;P0=250;P1=-7750;P2=750;P3=-250;P4=-750;D=01042323232323232323230404042304230423042304230404;
2018.08.24 20:07:04 3: nanoCUL IT: IT_Steckdose_A on->on
2018.08.24 20:07:04 4: SIGNALduino/msg READ: SR;R=6;P0=250;P1=-7750;P2=750;P3=-250;P4=-750;D=01042323232323232323230404042304230423042304230404;
2018.08.24 20:07:04 4: SIGNALduino/read sendraw answer: SR;R=6;P0=250;P1=-7750;P2=750;P3=-250;P4=-750;D=01042323232323232323230404042304230423042304230404;
2018.08.24 20:07:04 4: SIGNALduino/HandleWriteQueue: nothing to send, stopping timer
2018.08.24 20:07:05 4: SIGNALduino/msg READ: MU;P0=-97;P1=98;P2=145;P3=-1035;P7=-2013;D=0771722327271313301333130077131330323370;CP=1;
2018.08.24 20:07:05 4: SIGNALduino: Fingerprint for MU Protocol id 13.1 -> FLAMINGO FA21 / LM-101LD matches, trying to demodulate
2018.08.24 20:07:05 4: SIGNALduino: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2018.08.24 20:07:05 4: SIGNALduino: Fingerprint for MU Protocol id 39 -> X10 Protocol matches, trying to demodulate
2018.08.24 20:07:11 4: SIGNALduino/msg READ: MS;P1=471;P2=-1970;P3=-3928;P5=-8571;D=15121313121212131213121312121212121313121313131212121312121312131314;CP=1;SP=5;O;
2018.08.24 20:07:11 4: SIGNALduino: Matched MS Protocol id 0 -> weather1
2018.08.24 20:07:11 4: SIGNALduino: Decoded MS Protocol id 0 dmsg s62A0DC4B00 length 32
2018.08.24 20:07:11 4: SIGNALduino: Matched MS Protocol id 68 -> PFR-130
2018.08.24 20:07:11 4: SIGNALduino: Decoded MS Protocol id 68 dmsg s62A0DC4B00 length 32
2018.08.24 20:07:11 4: SIGNALduino Dispatch: s62A0DC4B00, Dropped due to short time or equal msg
2018.08.24 20:07:11 3: SIGNALduino IT_set: IT_Steckdose_A off
2018.08.24 20:07:11 4: SIGNALduino/set: sending via SendMsg: SR;R=6;P0=250;P1=-7750;P2=750;P3=-250;P4=-750;D=01042323232323232323230404042304230423042304040423;
2018.08.24 20:07:14 4: SIGNALduino/keepalive ok, retry = 0
2018.08.24 20:07:14 4: SIGNALduino SendrawFromQueue: msg=SR;R=6;P0=250;P1=-7750;P2=750;P3=-250;P4=-750;D=01042323232323232323230404042304230423042304040423;
2018.08.24 20:07:14 3: SIGNALduino IT_set: IT_Steckdose_A off
2018.08.24 20:07:14 4: SIGNALduino/set: sending via SendMsg: SR;R=6;P0=250;P1=-7750;P2=750;P3=-250;P4=-750;D=01042323232323232323230404042304230423042304040423;
2018.08.24 20:07:14 4: SIGNALduino/msg READ: SR;R=6;P0=250;P1=-7750;P2=750;P3=-250;P4=-750;D=01042323232323232323230404042304230423042304040423;
2018.08.24 20:07:14 4: SIGNALduino/read sendraw answer: SR;R=6;P0=250;P1=-7750;P2=750;P3=-250;P4=-750;D=01042323232323232323230404042304230423042304040423;
2018.08.24 20:07:14 4: SIGNALduino SendrawFromQueue: msg=SR;R=6;P0=250;P1=-7750;P2=750;P3=-250;P4=-750;D=01042323232323232323230404042304230423042304040423;
2018.08.24 20:07:14 4: SIGNALduino/msg READ: MS;P0=-1968;P1=471;P2=-3927;P4=-8566;D=14101212101010121012101210101010101212101212121010101210101210121215;CP=1;SP=4;
2018.08.24 20:07:14 4: SIGNALduino: Matched MS Protocol id 0 -> weather1
2018.08.24 20:07:14 4: SIGNALduino: Decoded MS Protocol id 0 dmsg s62A0DC4B00 length 32
2018.08.24 20:07:14 4: SIGNALduino: Matched MS Protocol id 68 -> PFR-130
2018.08.24 20:07:14 4: SIGNALduino: Decoded MS Protocol id 68 dmsg s62A0DC4B00 length 32
2018.08.24 20:07:14 4: SIGNALduino Dispatch: s62A0DC4B00, Dropped due to short time or equal msg
2018.08.24 20:07:14 4: SIGNALduino/msg READ: Received answer (MS;P0=-1968;P1=471;P2=-3927;P4=-8566;D=14101212101010121012101210101010101212101212121010101210101210121215;CP=1;SP=4;) for sendraw does not match ^S(R|C|M);
2018.08.24 20:07:15 4: SIGNALduino/msg READ: SR;R=6;P0=250;P1=-7750;P2=750;P3=-250;P4=-750;D=01042323232323232323230404042304230423042304040423;
2018.08.24 20:07:15 4: SIGNALduino/read sendraw answer: SR;R=6;P0=250;P1=-7750;P2=750;P3=-250;P4=-750;D=01042323232323232323230404042304230423042304040423;
2018.08.24 20:07:15 4: SIGNALduino/HandleWriteQueue: nothing to send, stopping timer
2018.08.24 20:07:16 4: SIGNALduino/msg READ: MS;P0=-410;P1=473;P3=-1967;P5=-8568;D=15101313131013101010131313131313131013101310131010131013131313131010;CP=1;SP=5;
2018.08.24 20:07:16 4: SIGNALduino: Matched MS Protocol id 4 -> arctech2
2018.08.24 20:07:16 4: SIGNALduino: Decoded MS Protocol id 4 dmsg i747F54BE000 length 36
2018.08.24 20:07:16 4: SIGNALduino IT: message "i747F54BE000" (12)
2018.08.24 20:07:16 4: SIGNALduino IT: msgcode "00D0000D11DDDDDD" (16) bin = 01110100011111110101010010111110000000000000
2018.08.24 20:07:16 4: SIGNALduino IT: Wrong IT message received: 00D0000D11DDDDDD
2018.08.24 20:07:16 4: SIGNALduino IT: message "i747F54BE000" (12)
2018.08.24 20:07:16 4: SIGNALduino IT: msgcode "00D0000D11DDDDDD" (16) bin = 01110100011111110101010010111110000000000000
2018.08.24 20:07:17 4: SIGNALduino IT: Wrong IT message received: 00D0000D11DDDDDD
2018.08.24 20:07:17 3: SIGNALduino: Unknown code i747F54BE000, help me!
2018.08.24 20:07:17 4: SIGNALduino/msg READ: MC;LL=-1012;LH=948;SL=-516;SH=455;D=32AACAD3554AAB4CCAAB2B34AAAACCD4B3;C=488;L=136;
2018.08.24 20:07:17 4: SIGNALduino: Found manchester Protocol id 10 clock 488 -> OSV2o3
2018.08.24 20:07:17 4: SIGNALduino: Found manchester Protocol id 12 clock 488 -> Hideki protocol
2018.08.24 20:07:17 4: SIGNALduino: hideki start pattern (10101110) not found
2018.08.24 20:07:17 4: SIGNALduino: Found manchester Protocol id 52 clock 488 -> OS_PIR
2018.08.24 20:07:17 4: SIGNALduino: Found manchester Protocol id 58 clock 488 -> tfa 30.3208.0
2018.08.24 20:07:17 4: SIGNALduino/msg READ: MC;LL=-994;LH=966;SL=-522;SH=469;D=AAAAAAAA64;C=491;L=38;
2018.08.24 20:07:17 4: SIGNALduino: Found manchester Protocol id 52 clock 491 -> OS_PIR
Gruß
Mathze
Hi,
Wenn du die Zeilen der FB als raw sendest, schalten Sue dann?
Beispiel:
set sduino raw MS;P1=473;P2=-1970;P3=-3922;P5=-8572;D=15121313121212131213121312121212121313121313131212121312121312131314;CP=1;SP=5;O;
Oder auch die MU Zeilen!?
Hier ist der Basistakt P1 ja eher 500 mit P2=-4*500, P3=-8*500, P5=-16*500
Schau Dir mal die anderen Zeilen an. Danach probiere mal den Basisstakt im IT Device zu erhöhen 480-520...
Gruß Arnd
Raspi2 mit FHEM, CUL, Signalduino, MySensors, HomeBridge, Presence, Bravia, ...
Moin Arnd, ich kann es Dir nicht erklären, aber auf einmal funktioniert es.
Ich habe nichts verändert.
Ich habe eben wie verrückt auf die Fernbedienung eingedroschen ;D
Es wurde auf einmal per autocreate ein neues Device angelegt, was auch nicht funktioniert hatte, danach habe ich ca. 10x auf "on" (per FHEM) von einer Steckdose (in diesem Fall Steckdose A) gedrückt und auf einmal geht es :o
Frag mich nicht, wieso.
Trotzdem danke für deine Hilfe :)
Gruß
Mathze
Hi,
Wahrscheinlich weil jetzt die Dose auf FHEM programmiert ist ;-)
Gruß Arnd
Raspi2 mit FHEM, CUL, Signalduino, MySensors, HomeBridge, Presence, Bravia, ...