eBUS Adapter 3.0

Begonnen von Reinhart, 13 Oktober 2020, 17:55:29

Vorheriges Thema - Nächstes Thema

Citrus91

So sieht mein aktuelles Logfile aus. Kann ich noch etwas gegen die "unknown MS cmd ..." tun?

2025-01-16 20:30:33.201 [update notice] received unknown MS cmd: f108b503020004 / 0affffffffffffffffffff

2025-01-16 20:30:33.383 [update notice] received unknown MS cmd: 1076b5110101 / 09ff314003ff420000ff

2025-01-16 20:30:33.490 [update notice] received unknown MS cmd: f108b503020005 / 00

2025-01-16 20:30:33.669 [update notice] received unknown MS cmd: 1076b512030f0001 / 0716020000801100

2025-01-16 20:30:33.773 [update notice] received unknown MS cmd: f176b503020001 / 00

2025-01-16 20:30:33.956 [update notice] received update-write hmu SetMode QQ=10: auto;27.0;-;-;0;1;1;0;0;0

2025-01-16 20:30:34.093 [update notice] received read hmu Status01 QQ=f1: 24.0;24.5;3.250;-;33.0;off

2025-01-16 20:30:34.273 [update notice] received unknown MS cmd: 1076b51009000000ffffff050000 / 0101

2025-01-16 20:30:34.411 [update notice] received unknown MS cmd: f108b5110100 / 09860112000008000100

2025-01-16 20:30:40.414 [update notice] received unknown MS cmd: f115b52406020003001b00 / 0601031b000000

2025-01-16 20:30:40.598 [update notice] received unknown MS cmd: f115b52406020001000f00 / 0601010f000000

2025-01-16 20:30:42.454 [update notice] received unknown MS cmd: f108b50905540200180b / 060201180b1600

2025-01-16 20:30:42.634 [update notice] received read hmu Status01 QQ=f1: 24.0;24.5;3.250;-;33.0;off

2025-01-16 20:30:43.027 [update notice] received read hmu Status01 QQ=10: 24.0;24.5;3.250;-;33.0;off

2025-01-16 20:30:43.293 [update notice] received unknown MS cmd: 1076b5110101 / 09ff314003ff420000ff

2025-01-16 20:30:43.559 [update notice] received unknown MS cmd: 1076b512030f0001 / 0716020000801100

2025-01-16 20:30:43.825 [update notice] received update-write hmu SetMode QQ=10: auto;27.0;-;-;0;1;1;0;0;0

2025-01-16 20:30:44.091 [update notice] received unknown MS cmd: 1076b51009000000ffffff050000 / 0101

2025-01-16 20:30:44.408 [update notice] received unknown MS cmd: f108b503020003 / 0a6500ffffffffffffffff

2025-01-16 20:30:53.016 [update notice] received read hmu Status01 QQ=10: 24.0;24.5;3.250;-;33.0;off

2025-01-16 20:30:53.282 [update notice] received unknown MS cmd: 1076b5110101 / 09ff314003ff420000ff

2025-01-16 20:30:53.548 [update notice] received unknown MS cmd: 1076b512030f0001 / 0716020000801100

2025-01-16 20:30:53.814 [update notice] received update-write hmu SetMode QQ=10: auto;27.0;-;-;0;1;1;0;0;0

2025-01-16 20:30:54.081 [update notice] received unknown MS cmd: 1076b51009000000ffffff050000 / 0101

2025-01-16 20:30:56.403 [update notice] received unknown MS cmd: f115b52406020003001b00 / 0601031b000000

2025-01-16 20:30:56.587 [update notice] received unknown MS cmd: f115b52406020001000f00 / 0601010f000000

2025-01-16 20:31:03.014 [update notice] received read hmu Status01 QQ=10: 24.0;24.5;3.250;-;33.0;off

2025-01-16 20:31:03.281 [update notice] received unknown MS cmd: 1076b5110101 / 09ff314003ff420000ff

2025-01-16 20:31:03.548 [update notice] received unknown MS cmd: 1076b512030f0001 / 0716020000801100

2025-01-16 20:31:03.814 [update notice] received update-write hmu SetMode QQ=10: auto;27.0;-;-;0;1;1;0;0;0

2025-01-16 20:31:04.080 [update notice] received unknown MS cmd: 1076b51009000000ffffff050000 / 0101

2025-01-16 20:31:12.502 [update notice] received unknown MS cmd: f115b52406020003001b00 / 0601031b000000

2025-01-16 20:31:12.686 [update notice] received unknown MS cmd: f115b52406020001000f00 / 0601010f000000



Citrus91

Zitat von: Citrus91 am 16 Januar 2025, 21:26:08
Zitat von: john30 am 26 Februar 2023, 08:18:21john30

Vielen Dank an dieser Stelle nochmal für die geleistete Arbeit.

Ich hatte bis jetzt die EBUSD-Software direkt auf dem Raspberry laufen. Aktuell ziehe ich gerade alles nach Docker um. Der EBUSD-Container läuft schon und liefert Werte. Allerdings scheitere ich an der Angabe das er die Ausgabe als JSON-short machen soll. Meine alte Konfig sah so aus:

EBUSD_OPTS="--scanconfig -d ens:/dev/ttyUSB1 --mqtthost=192.168.178.211 --mqttport=1883 --mqttuser=meinNutzer --mqttpass=meinPasswort --mqttjson=short"

Im Compose/Stack habe ich jetzt so versucht:

EBUSD_MQTTJSON: "short"
...bringt leider aber eine Fehlermeldung.

EBUSD_MQTTJSON: ""

...funktioniert, aber das ist wohl die lange Version vom JSON.


Kannst du oder jemand helfen?



PS: Das ist mein komplettes Compose:

services:  # https://hub.docker.com/r/john30/ebusd
    ebusd:  #https://github.com/john30/ebusd/blob/master/contrib/docker/docker-compose.example.yaml
        image: john30/ebusd
        container_name: ebusd
        restart: unless-stopped
        ports:
          - 8888:8888
          #- 8080:8080
         
        devices:
          - /dev/ttyUSB1:/dev/ttyUSB0
         
        networks:
          network1:
            ipv4_address: 192.168.178.212
         
        environment:
          EBUSD_DEVICE: "ens:/dev/ttyUSB0"
          EBUSD_SCANCONFIG: ""
         
          EBUSD_MQTTHOST: 192.168.178.211
          EBUSD_MQTTPORT: 1883
          EBUSD_MQTTCLIENTID: "ebusd"
          EBUSD_MQTTUSER: "meinNutzer"
          EBUSD_MQTTPASS: "meinPasswort"
          EBUSD_MQTTTOPIC: "ebusd"
          EBUSD_MQTTGLOBAL: "ebusd/global/"
          EBUSD_MQTTJSON: ""

networks:
  network1:
    name: vlan-creation
    external: true


Hat keiner eine Idee?