Schnittstelle EBusD und FHEM

[TobiasR]

Hallo,

ich brauche noch einmal etwas Unterstützung.
Mein EBUS Adapter hat die Verbindung zum Raspberry über MQTT hergestellt.
Dort erhalte ich jetzt die gewünschten Informationen:

Code Auswählen Erweitern

pi@raspberrypi:~ $ ebusctl i
version: ebusd 23.3.23.3
update check: OK, device firmware 1[3c17] available
device: 192.168.0.209:9999, TCP, enhanced, firmware 1.1[3a0f].1[3a0f]
signal: acquired
symbol rate: 98
max symbol rate: 120
min arbitration micros: 3
max arbitration micros: 41
min symbol latency: 6
max symbol latency: 28
scan: finished
reconnects: 0
masters: 4
messages: 514
conditional: 0
poll: 0
update: 10
address 03: master #11
address 08: slave #11, scanned "MF=Vaillant;ID=HMU01;SW=0306;HW=8802", loaded "vaillant/08.hmu.csv"
address 10: master #2
address 15: slave #2, scanned "MF=Vaillant;ID=70000;SW=0419;HW=4603", loaded "vaillant/15.700.csv"
address 31: master #8, ebusd
address 36: slave #8, ebusd, scanning
address 71: master #9
address 76: slave #9, scanned "MF=Vaillant;ID=VWZIO;SW=0111;HW=0103"
address e3: slave, scanned "MF=Vaillant;ID=FMU00;SW=0202;HW=6502"
address e8: slave, scanned "MF=Vaillant;ID=FMU00;SW=0202;HW=6502"
address ec: slave, scanned "MF=Vaillant;ID=70000;SW=0419;HW=4603"

Im Eventmonitor des FHEM erhalte ich jedoch nur diese Ausgabe:

Code Auswählen Erweitern

2023-12-28 18:20:04 MQTT2_SERVER ebusMQTT lastPublish: ebusd/430/Hc1HeatCurve/get:
2023-12-28 18:20:04 at get_ebus_updates Next: 18:35:04
2023-12-28 18:20:34 MQTT2_SERVER ebusMQTT nrclients: 2
2023-12-28 18:20:34 MQTT2_SERVER ebusMQTT nrclients: 1
Im Logfile wird mir dies ausgegeben:

Code Auswählen Erweitern

2023-12-28 15:14:32.447 [update notice] received unknown MS cmd: 7108b507030bffff / 0101
2023-12-28 15:14:35.219 [update notice] received unknown MS cmd: 03e8b512060b2602150200 / 0b2202000001ffffffffff00
2023-12-28 15:14:36.799 [update notice] received read hmu State QQ=71: 100;320;on;heating
2023-12-28 15:14:41.008 [update notice] received read hmu Status01 QQ=10: 44.0;32.0;-;-;-;on
2023-12-28 15:14:41.277 [update notice] received unknown MS cmd: 1076b5110101 / 09ffffa900ffff000058
2023-12-28 15:14:41.538 [update notice] received unknown MS cmd: 1076b512030f0001 / 07008000c5021403
2023-12-28 15:14:41.749 [update notice] received unknown BC cmd: 10feb505025c00
2023-12-28 15:14:42.018 [update notice] received update-write hmu SetMode QQ=10: auto;56.5;-;-;0;1;1;0;0;0
2023-12-28 15:14:42.277 [update notice] received unknown MS cmd: 1076b51009000000ffffff050000 / 0101
2023-12-28 15:14:42.547 [update notice] received unknown MS cmd: 1076b5040100 / 0a0343141528120423900a
2023-12-28 15:14:42.617 [update notice] received unknown MS cmd: 7108b507030bffff / 0101
2023-12-28 15:14:42.817 [update notice] received unknown MS cmd: 1008b507020971 / 025501
2023-12-28 15:14:43.058 [update notice] received update-read broadcast vdatetime QQ=10: 15:14:41;28.12.2023
2023-12-28 15:14:43.315 [update notice] received unknown MS cmd: 1008b5110100 / 09bc02ffc80a090081c8
2023-12-28 15:14:43.594 [update notice] received unknown MS cmd: 1076b51303040d00 / 0a0d000300000003000300
2023-12-28 15:14:43.808 [update notice] received update-read broadcast outsidetemp QQ=10: 10.625
2023-12-28 15:14:44.039 [update notice] received update-write hmu StatusCirPump QQ=10: off
2023-12-28 15:14:44.277 [update notice] received unknown MS cmd: 1008b512020464 / 0101
2023-12-28 15:14:44.508 [update notice] received unknown MS cmd: 1008b513020528 / 0101
2023-12-28 15:14:44.719 [update notice] received unknown BC cmd: 10feb510020600
2023-12-28 15:14:44.844 [update notice] received read hmu State QQ=71: 100;320;on;heating
2023-12-28 15:14:45.397 [update notice] received unknown MS cmd: 03e8b512060b2602150200 / 0b1202000001ffffffffff00
2023-12-28 15:14:51.058 [update notice] received read hmu Status01 QQ=10: 44.0;32.0;-;-;-;on
2023-12-28 15:14:51.327 [update notice] received unknown MS cmd: 1076b5110101 / 09ffffa900ffff000058
2023-12-28 15:14:51.587 [update notice] received unknown MS cmd: 1076b512030f0001 / 07008000c7021403
2023-12-28 15:14:51.856 [update notice] received update-write hmu SetMode QQ=10: auto;56.5;-;-;0;1;1;0;0;0
2023-12-28 15:14:52.114 [update notice] received unknown MS cmd: 1076b51009000000ffffff050000 / 0101
2023-12-28 15:14:52.657 [update notice] received unknown MS cmd: 7108b507030bffff / 0101
2023-12-28 15:14:52.913 [update notice] received read hmu State QQ=71: 100;320;on;heating
2023-12-28 15:14:55.561 [update notice] received unknown MS cmd: 03e8b512060b2602150200 / 0b2402000001ffffffffff00
2023-12-28 15:15:00.958 [update notice] received read hmu State QQ=71: 100;320;on;heating
2023-12-28 15:15:01.098 [update notice] received read hmu Status01 QQ=10: 44.0;32.5;-;-;-;on
2023-12-28 15:15:01.362 [update notice] received unknown MS cmd: 1076b5110101 / 09ffffaa00ffff000059
2023-12-28 15:15:01.627 [update notice] received unknown MS cmd: 1076b512030f0001 / 07008000c8021403
2023-12-28 15:15:01.898 [update notice] received update-write hmu SetMode QQ=10: auto;56.5;-;-;0;1;1;0;0;0
2023-12-28 15:15:02.154 [update notice] received unknown MS cmd: 1076b51009000000ffffff050000 / 0101
2023-12-28 15:15:02.747 [update notice] received unknown MS cmd: 7108b507030bffff / 0101
2023-12-28 15:15:05.697 [update notice] received unknown MS cmd: 03e8b512060b2602150200 / 0b4002000001ffffffffff00
2023-12-28 15:15:08.988 [update notice] received read hmu State QQ=71: 100;320;on;heating
2023-12-28 15:15:11.098 [update notice] received read hmu Status01 QQ=10: 44.0;32.5;-;-;-;on
2023-12-28 15:15:11.362 [update notice] received unknown MS cmd: 1076b5110101 / 09ffffa900ffff000059
2023-12-28 15:15:11.627 [update notice] received unknown MS cmd: 1076b512030f0001 / 07008000ca021403
2023-12-28 15:15:11.898 [update notice] received update-write hmu SetMode QQ=10: auto;56.5;-;-;0;1;1;0;0;0
2023-12-28 15:15:12.157 [update notice] received unknown MS cmd: 1076b51009000000ffffff050000 / 0101
2023-12-28 15:15:12.867 [update notice] received unknown MS cmd: 7108b507030bffff / 0101
2023-12-28 15:15:15.861 [update notice] received unknown MS cmd: 03e8b512060b2602150200 / 0bf201000001ffffffffff00
2023-12-28 15:15:17.058 [update notice] received read hmu State QQ=71: 100;321;on;heating
2023-12-28 15:15:21.137 [update notice] received read hmu Status01 QQ=10: 44.5;32.5;-;-;-;on
2023-12-28 15:15:21.405 [update notice] received unknown MS cmd: 1076b5110101 / 09ffffa900ffff000059
2023-12-28 15:15:21.667 [update notice] received unknown MS cmd: 1076b512030f0001 / 07008000cc021403
2023-12-28 15:15:21.937 [update notice] received update-write hmu SetMode QQ=10: auto;56.5;-;-;0;1;1;0;0;0

Wenn ich es richtig verstanden habe müssten diese kryptischen Daten doch umformatiert und dann zur Ausgabe gebracht werden?
Die Werte bleiben jedoch bei jedem Template leer.

Was mache ich da falsch oder besser was habe ich vergessen?