2024.04.28 12:54:38.660 1: Error on EaseeWallbox_WriteToCloudAPI. Missing site_id. Please ensure basic data is available.
2024.04.28 12:54:38.939 1: HTTPS error while requesting https://api.easee.cloud/api/chargers/EHxxx/state - 401
2024.04.28 12:54:38.970 1: HTTPS error while requesting https://api.easee.cloud/api/chargers/EHxxx/config - 401
2024.04.28 12:54:38.979 1: HTTPS error while requesting https://api.easee.cloud/api/chargers/EHxxx/site - 401
2024.04.28 12:54:38.988 1: HTTPS error while requesting https://api.easee.cloud/api/chargers/EHxxx/sessions/ongoing - 401
2024.04.28 12:54:38.992 1: HTTPS error while requesting https://api.easee.cloud/api/sessions/charger/EHxxx/monthly - 401
2024.04.28 12:54:39.013 1: HTTPS error while requesting https://api.easee.cloud/api/sessions/charger/EHxxx/daily - 401
2024.04.05 19:50:26 3: CUL_HM set HM_Steckdose_2_Sw on noArg
Error parsing time at /usr/lib/arm-linux-gnueabihf/perl/5.28/Time/Piece.pm line 583.
2024.04.05 19:51:57 1: Including fhem.cfg
2024-04-05_19:50:26 HM_Steckdose_2 commState: CMDs_pending
2024-04-05_19:50:26 HM_Steckdose_2_Sw commState: CMDs_pending
2024-04-05_19:50:26 HM_Steckdose_2 CMDs_pending
2024-04-05_19:50:26 HM_Steckdose_2_Sw set_on noArg
2024-04-05_19:50:26 HM_Steckdose_2 commState: CMDs_processing...
2024-04-05_19:50:26 HM_Steckdose_2_Sw commState: CMDs_processing...
2024-04-05_19:50:26 HM_Steckdose_2_Sw trigLast: fhem:02
2024-04-05_19:50:26 Weihnachtskugel_abends_Licht_an Next: 19:51:51
2024.04.04 19:49:01 3: CUL_HM set HM_Steckdose_2_Sw on noArg
2024-04-04_19:49:01 HM_Steckdose_2 commState: CMDs_pending
2024-04-04_19:49:01 HM_Steckdose_2_Sw commState: CMDs_pending
2024-04-04_19:49:01 HM_Steckdose_2 CMDs_pending
2024-04-04_19:49:01 HM_Steckdose_2_Sw set_on noArg
2024-04-04_19:49:01 HM_Steckdose_2 commState: CMDs_processing...
2024-04-04_19:49:01 HM_Steckdose_2_Sw commState: CMDs_processing...
2024-04-04_19:49:01 HM_Steckdose_2_Sw trigLast: fhem:02
2024-04-04_19:49:01 Weihnachtskugel_abends_Licht_an Next: 19:50:26
2024-04-04_19:49:01 HM_Steckdose_2_Sw commState: CMDs_processing...
2024-04-04_19:49:01 HM_Steckdose_2 commState: CMDs_done
2024-04-04_19:49:01 HM_Steckdose_2 CMDs_done
2024-04-04_19:49:01 HM_Steckdose_2_Sw commState: CMDs_done
2024-04-04_19:49:01 HM_Steckdose_2_Sw deviceMsg: on (to VCCU)
2024-04-04_19:49:01 HM_Steckdose_2_Sw level: 100
2024-04-04_19:49:01 HM_Steckdose_2_Sw pct: 100
2024-04-04_19:49:01 HM_Steckdose_2_Sw on
2024-04-04_19:49:01 HM_Steckdose_2_Sw timedOn: off
*{sunset("REAL",0,"16:30","21:30")} set HM_Steckdose_2_Sw on
Zitat von: Benni am 28 April 2024, 11:43:42Zitat von: LuGu am 28 April 2024, 11:14:59... dass hatte ich mir schon angesehen. Hat aber keinen Erfolg gebracht.
Das in der Doku angegebene %d({ "weekday"\: "long" }) funktioniert zum Beispiel auch nicht und ergibt einen json error.
Bei mir funktioniert das angegebene Beispiel und mitmydatum::%d({ "day"\: "2-digit", "month"\: "2-digit" })
bekomme ich das gewünschte Ergebnis.
(Im Reading mydatum des entsprechenden Device steht bei mir "01.02.2023" drin - ohne Anführungszeichen"
Vielleicht postest du mal noch ein list, vom Device, das den Wert (worin?) liefert und das Json oder nen Screenshot, wo das in der FHEMApp-Config hin soll.
gb#