FHEM Forum

Das ist ein Hilfsmodul, um existierende Readings umformatieren zu koennen. Der Commandref Eintrag:


Define

   
• define <name> readingsChange <device> <readingName> <toReplace> <replaceWith>"
  
  Change the content of a reading if it changes, with the perl string substitute mechanism. Note: As some modules rely on the known format of some readings, changing such readings may cause these modules to stop working.
  
  <device>, <readingName> and <toReplace> are regular expressions, and are not allowed to contain whitespace. If replaceWith is enclosed in {}, then the content will be executed as a perl expression for each match.
  
  Examples:
  
        
  • # shorten the reading power 0.5 W previous: 0 delta_time: 300
    # to just power 0.5 W
    define pShort readingsChange pm power (.*W).* $1
    
    # format each decimal number in the power reading to 2 decimal places
    define p2dec readingsChange pm power (\d+\.\d+) {sprintf("%02.f", $1)}

Set

   
• N/A

Get

   
• N/A

Attributes

   
• disable
• disabledForIntervals

Entweder funktioniert es nicht wie gedacht oder ich komme damit nicht klar!
Habe fast 1:1 übernommen aber das Reading bleibt das Gleiche.
Internals:
   CFGFN
   DEF        ku_SD6 power (.*W).* $1
   NAME       pShort
   NOTIFYDEV  ku_SD6
   NR         1134
   NTFY_ORDER 00-pShort
   STATE      active
   TYPE       readingsChange
   Readings:
     2017-01-10 19:53:17   state           active


   Readings:
     2016-10-29 19:40:08   SEND_DATA       failed:00
     2016-10-29 19:40:05   assocGroup_1    Max 5 Nodes ZWaveBridge
     2016-10-29 19:40:07   assocGroup_2    Max 5 Nodes
     2016-10-29 19:40:08   assocGroup_3    Max 5 Nodes
     2016-10-29 19:40:05   assocGroups     3
     2016-10-29 19:39:57   configButtonOnOff Enable
     2016-10-29 19:39:58   configConfigureMaximumOverLoadCurrent 150
     2016-10-29 19:39:58   configConfigurePlugTimeSwitchFunction Disable
     2016-10-29 19:39:59   configLedDisplay Enable
     2016-10-29 19:39:59   configMeterReportInterval 300
     2016-10-29 19:39:59   configRememberRelayONOFFStatus Enable
     2016-10-29 19:40:00   configSendMeterReport Enable
     2017-01-10 20:00:21   current          0.1 A previous: 0.09 delta_time: 31 s
     2017-01-10 20:00:18   energy           1.36 kWh previous: 1.36 delta_time: 31 s
     2016-10-29 19:31:20   model           Neo CoolCam Power plug 12A
     2016-10-29 19:31:20   modelConfig     shenzen_neo/nas-wr01z.xml
     2016-10-29 19:31:20   modelId         0258-0003-1087
     2017-01-10 20:00:19   power            14.99 W previous: 13.55 delta_time: 31 s
     2017-01-01 14:51:50   state           on
     2017-01-01 14:36:07   timeToAck       3.898
     2017-01-01 14:36:07   transmit        OK
     2017-01-10 20:00:20   voltage          246.35 V previous: 246.36 delta_time: 31 s

Kann bei <device> devspec angegeben werden oder tatsächlich nur der Device Name?
Wollte das für energy, current und voltage auch umsetzen, funktioniert leider auch nicht.

Danke.

Gruß
Dan