attr WEB editConfig 1
attr initialUsbCheck disable 1
sudo addgroup fhem plugdev
Protect this FHEM installation by defining an allowed device with define allowed allowed
You can disable this message with attr global motd none
2024.04.24 16:15:07 1: usb create starting
2024.04.24 16:15:07 3: Probing ZWDongle device /dev/serial0
2024.04.24 16:15:07 3: Probing CUL device /dev/ttyAMA10
2024.04.24 16:15:07 3: Probing TCM_ESP3 device /dev/ttyAMA10
2024.04.24 16:15:07 3: Probing ZWDongle device /dev/ttyAMA10
2024.04.24 16:15:08 3: Probing SIGNALDuino device /dev/ttyAMA10
2024.04.24 16:15:08 3: Probing MYSENSORS device /dev/ttyAMA10
2024.04.24 16:15:08 3: Probing ArduCounter device /dev/ttyAMA10
2024.04.24 16:15:08 3: Probing ElsnerWS device /dev/ttyAMA10
2024.04.24 16:15:09 3: Probing FRM device /dev/ttyAMA10
2024.04.24 16:22:53 1: Including fhem.cfg
2024.04.24 16:22:53 3: WEB: port 8083 opened
2024.04.24 16:22:53 2: eventTypes: loaded 0 lines from ./log/eventTypes.txt
2024.04.24 16:22:53 1: Including ./log/fhem.save
2024.04.24 16:22:53 1: Messages collected while initializing FHEM:SecurityCheck:
WEB is not password protected
Protect this FHEM installation by defining an allowed device with define allowed allowed
You can disable this message with attr global motd none
2024.04.24 16:22:53 1: usb create starting
2024.04.24 16:22:53 3: Probing ZWDongle device /dev/serial0
2024.04.24 16:22:53 3: Probing CUL device /dev/ttyAMA10
2024.04.24 16:22:53 3: Probing TCM_ESP3 device /dev/ttyAMA10
2024.04.24 16:22:53 3: Probing ZWDongle device /dev/ttyAMA10
2024.04.24 16:22:54 3: Probing SIGNALDuino device /dev/ttyAMA10
2024.04.24 16:22:54 3: Probing MYSENSORS device /dev/ttyAMA10
2024.04.24 16:22:54 3: Probing ArduCounter device /dev/ttyAMA10
2024.04.24 16:22:54 3: Probing ElsnerWS device /dev/ttyAMA10
2024.04.24 16:22:55 3: Probing FRM device /dev/ttyAMA10
Zitat von: ToKa am 24 April 2024, 13:04:02Hallo Jakob,Hallo Torsten, super, danke, das freut mich!
nein das reicht nicht. Du musst tatsächlich das Cookie auf deinen fhem Rechner "kopieren" und mit den entsprechenden Funktionen in der yahoo_jason laden.
Ich beschreibe es heute Abend ausführlicher wie ich es gemacht habe.
VG
Torsten
Zitat von: Ralf9 am 24 April 2024, 14:05:57F/UTP Cat 6 KabelBei Verlegekabel (insb im Sinne von: ab in die Wand oder Leerrohr und lange nicht anfassen) würde ich nichts unter S(F)/FTP (PiMF) nehmen; laut Wikipedia nichts unter CAT7.
Zitat von: d0m2011 am 17 April 2024, 21:31:07Ich habe hinter der Kaffeemaschine ein Netzteil um verschiedene USB-Geräte zu laden.Sorry dass ich nochmal nachfragen muss, die Kabel von der Kaffeemaschine hast du an nc und no angeschlossen, oder?
Davon nutze ich einen Port, um das Relais mit Strom zu versorgen.
Da das Netzteil eh da war, habe ich gar nicht darüber nachgedacht, den Strom bei der Kaffeemaschine zu holen.