Zitat von: Guzzi-Charlie am 26 April 2024, 20:07:302024.04.26 19:30:47.309 1: usb create startingwenn er hier stirbt, dann solltest Du initialUsbCheck ausschalten
attr initalUsbCheck disable 1
oder delete initalUsbCheck
Danach save und USb Sticks wieder dran und neustart.setuuid: Please define BridgeSonoff first
-> das liegt am gelöschten Tasmota-Modul und ist erstmal unwichtig
Cannot load module SIP
setuuid: Please define FHEM_SIP1 first
Cannot load module SIP
setuuid: Please define FHEM_SIP2 first
Cannot load module SIP
setuuid: Please define FHEM_SIP3 first
-> die SIP-Funktionen benutze ich im Moment auch nicht, also auch unwichtig
Cannot load module BindingsIo
setuuid: Please define fhempy_local first
-> das brauche ich und muß ich wohl nachinstallieren, schaue ich gerade wie.
SecurityCheck:
telnetPort is not password protected
MQTT2_FHEM_Server is not password protected
Protect this FHEM installation by configuring the allowed device allowed_WEB
You can disable this message with attr global motd none
Autosave deactivated
2024.04.26 19:30:47.223 1: Modbus_KG: Can't open /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0: No such file or directory
-> der USB-Stick steckt am Produktivsystem
2024.04.26 19:30:47.224 1: Modbus_KG2: Can't open /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_B001BIRB-if00-port0: No such file or directory
-> der USB-Stick steckt am Produktivsystem
2024.04.26 19:30:47.235 0: HMCCU [d_piccu3] Scheduling post FHEM initialization tasks in 12 seconds
-> ???
2024.04.26 19:30:47.309 1: usb create starting
Zitat von: CoolTux am 26 April 2024, 19:21:01Ich kann man schauen wann ich Zeit finde.Danke!