Neueste Beiträge

#11

MQTT / Aw: Bestway LayZSpar Wirlpool

Letzter Beitrag von Tueftler1983 - 13 Mai 2024, 22:33:34

So konnte nun etwas testen zwar nur vom Handy aber bin soweit ganz zufrieden.

Code Auswählen Erweitern

define MQTT2_spa MQTT2_DEVICE spa
attr MQTT2_spa devStateIcon 2.1:water-heat@orange:heat+0\
2.0:water-heat@red:heat+1\
3.0:water-heat@red:heat+1\
3.1:water-heat@green:heat+0\
1.1:sani_domestic_waterworks@green:pump+0\
1.0:sani_domestic_waterworks@red:pump+1\
4.0:vent_ventilation_level_0@red:bubbles+1\
4.1:vent_ventilation_level_3@green:bubbles+0
attr MQTT2_spa readingList spa:spa/Status:.* Status\
spa:spa/MAC_Address:.* MAC_Address\
spa:spa/MQTT_Connect_Count:.* MQTT_Connect_Count\
spa:spa/reboot_time:.* reboot_time\
spa:spa/reboot_reason:.* reboot_reason\
spa:spa/button:.* button\
spa:spa/message:.* { json2nameValue($EVENT) }\
spa:spa/times:.* { json2nameValue($EVENT) }\
spa:spa/other:.* { json2nameValue($EVENT) }\

attr MQTT2_spa room MQTT2_DEVICE
attr MQTT2_spa setList bubbles:0,1 spa/command {"CMD": 2, "VALUE": $EVTPART1, "XTIME": 0, "INTERVAL": 0}\
pump:0,1 spa/command {"CMD": 4, "VALUE": $EVTPART1, "XTIME": 0, "INTERVAL": 0}\
heat:0,1 spa/command {"CMD": 3, "VALUE": $EVTPART1, "XTIME": 0, "INTERVAL": 0}\

attr MQTT2_spa stateFormat 1:FLT\
2:RED\
3:GRN\
4:AIR\
TMP °C
#  CFGFN     
#  CID        spa
#  DEF        spa
#  FUUID      66423127-f33f-91a4-d07a-0166d68976c8990a
#  IODev      MQTT2_FHEM_Server
#  LASTInputDev MQTT2_FHEM_Server
#  MQTT2_FHEM_Server_CONN MQTT2_FHEM_Server_192.168.2.150_50192
#  MQTT2_FHEM_Server_MSGCNT 234
#  MQTT2_FHEM_Server_TIME 2024-05-13 22:19:17
#  MSGCNT    234
#  NAME      MQTT2_spa
#  NR        5510
#  STATE      1:1
#2:0
#3:0
#4:0
#29 °C
#  TYPE      MQTT2_DEVICE
#  eventCount 315
#  READINGS:
#    2024-05-13 22:19:16  AIR            0
#    2024-05-13 22:19:17  AIRTIME        5868
#    2024-05-13 22:19:16  AMB            40
#    2024-05-13 22:19:16  AMBC            40
#    2024-05-13 22:19:16  AMBF            104
#    2024-05-13 22:19:16  BRT            6
#    2024-05-13 22:19:16  CH1            32
#    2024-05-13 22:19:16  CH2            50
#    2024-05-13 22:19:16  CH3            57
#    2024-05-13 22:19:17  CLINT          14
#    2024-05-13 22:19:17  CLTIME          1715250060
#    2024-05-13 22:19:17  CONTENT        OTHER
#    2024-05-13 22:19:17  COST            11.15837669
#    2024-05-13 22:19:17  DBG              192 1 254 183 254 223 254 1 255 247 255 good pkt:0
#    2024-05-13 22:19:16  ERR            0
#    2024-05-13 22:19:17  FINT            30
#    2024-05-13 22:19:16  FLT            1
#    2024-05-13 22:19:17  FTIME          1715250056
#    2024-05-13 22:19:17  FW              2024-04-27-001
#    2024-05-13 22:19:16  GOD            0
#    2024-05-13 22:19:16  GRN            0
#    2024-05-13 22:19:17  HASGOD          false
#    2024-05-13 22:19:17  HASJETS        false
#    2024-05-13 22:19:17  HEATINGTIME    73570
#    2024-05-13 22:19:16  HJT            0
#    2024-05-13 22:13:43  IODev          MQTT2_FHEM_Server
#    2024-05-13 22:19:17  IP              192.168.2.150
#    2024-05-13 22:19:17  JETTIME        0
#    2024-05-13 22:19:17  KWH            41.3273201
#    2024-05-13 22:19:17  KWHD            41.33725281
#    2024-05-13 22:19:16  LCK            0
#    2024-05-13 17:26:32  MAC_Address    CC:50:E3:6B:70:30
#    2024-05-13 22:19:17  MODEL          MIAMI2021
#    2024-05-13 22:19:17  MQTT            0
#    2024-05-13 17:26:32  MQTT_Connect_Count 9
#    2024-05-13 22:19:17  PUMPTIME        89760
#    2024-05-13 22:19:16  PWR            1
#    2024-05-13 22:19:16  RED            0
#    2024-05-13 22:19:17  RS              Not ready
#    2024-05-13 22:19:17  RSSI            -66
#    2024-05-13 22:19:17  SSID            GartenAP
#    2024-05-13 17:26:31  Status          Alive
#    2024-05-13 22:19:17  T2R            5.510149956
#    2024-05-13 22:19:16  TGT            39
#    2024-05-13 22:19:16  TGTC            39
#    2024-05-13 22:19:16  TGTF            102
#    2024-05-13 22:19:17  TIME            1715631556
#    2024-05-13 22:19:16  TMP            29
#    2024-05-13 22:19:16  TMPC            29
#    2024-05-13 22:19:16  TMPF            84
#    2024-05-13 22:19:16  UNT            1
#    2024-05-13 22:19:17  UPTIME          355285
#    2024-05-13 22:19:16  VTM            29.98999977
#    2024-05-13 22:19:16  VTMC            29.98999977
#    2024-05-13 22:19:16  VTMF            85.98200226
#    2024-05-13 22:19:17  WATT            42
#    2024-05-13 17:27:25  act_t          spa/message
#    2024-05-13 17:27:25  act_tpl        {% if value_json.RED == 1 %}heating{% elif value_json.GRN == 1 %}idle{% elif value_json.FLT == 1 %}fan{% else %}off{% endif %}
#    2024-05-13 17:27:20  assumed_state  0
#    2024-05-13 17:27:25  avty_t          spa/Status
#    2024-05-13 17:26:33  button          NOBTN
#    2024-05-13 17:27:23  cmd_t          spa/command
#    2024-05-13 17:26:38  cmd_tpl        {CMD:12,VALUE:{{ value | int }},XTIME:0,INTERVAL:0}
#    2024-05-13 17:27:25  curr_temp_t    spa/message
#    2024-05-13 17:27:25  curr_temp_tpl  {{ value_json.TMPF }}
#    2024-05-13 17:27:23  dev_cla        restart
#    2024-05-13 17:27:25  dev_configuration_url http://192.168.2.150
#    2024-05-13 17:27:25  dev_connections_1_1 mac
#    2024-05-13 17:27:25  dev_connections_1_2 CC:50:E3:6B:70:30
#    2024-05-13 17:27:25  dev_identifiers 7041072
#    2024-05-13 17:27:25  dev_manufacturer Visualapproach
#    2024-05-13 17:27:25  dev_model      MIAMI2021
#    2024-05-13 17:27:25  dev_name        spa WiFi controller
#    2024-05-13 17:27:25  dev_sw_version  2024-04-27-001
#    2024-05-13 17:27:20  expire_after    700
#    2024-05-13 17:27:23  icon            mdi:restart
#    2024-05-13 22:19:17  loopfq          3064
#    2024-05-13 17:26:38  max            8
#    2024-05-13 17:27:25  max_temp        104
#    2024-05-13 17:26:38  min            0
#    2024-05-13 17:27:25  min_temp        68
#    2024-05-13 17:26:38  mode            slider
#    2024-05-13 17:27:25  mode_cmd_t      spa/command_batch
#    2024-05-13 17:27:25  mode_cmd_tpl    [{CMD:3,VALUE:{%if value == "heat" %}1{% else %}0{% endif %},XTIME:0,INTERVAL:0},{CMD:4,VALUE:{%if value == "fan_only" %}1{% elif value == "heat" %}1{% else %}0{% endif %},XTIME:0,INTERVAL:0}]
#    2024-05-13 17:27:25  mode_stat_t    spa/message
#    2024-05-13 17:27:25  mode_stat_tpl  {% if value_json.RED == 1 %}heat{% elif value_json.GRN == 1 %}heat{% else %}off{% endif %}
#    2024-05-13 17:27:25  modes_1        fan_only
#    2024-05-13 17:27:25  modes_2        off
#    2024-05-13 17:27:25  modes_3        heat
#    2024-05-13 17:27:25  name            spa temperature control
#    2024-05-13 17:27:23  payload_press  {CMD:6,VALUE:true,XTIME:0,INTERVAL:0}
#    2024-05-13 17:27:25  pl_avail        Alive
#    2024-05-13 17:27:25  pl_not_avail    Dead
#    2024-05-13 17:27:20  pl_off          {CMD:17,VALUE:false,XTIME:0,INTERVAL:0}
#    2024-05-13 17:27:20  pl_on          {CMD:17,VALUE:true,XTIME:0,INTERVAL:0}
#    2024-05-13 17:27:25  precision      1
#    2024-05-13 17:26:32  reboot_reason  Power On
#    2024-05-13 17:26:32  reboot_time    2024-05-11 09:44:01Z
#    2024-05-13 17:27:20  stat_t          spa/message
#    2024-05-13 22:19:15  state          bubbles
#    2024-05-13 17:26:52  state_class    measurement
#    2024-05-13 17:27:20  state_off      0
#    2024-05-13 17:27:20  state_on        1
#    2024-05-13 22:13:43  subscriptions  spa/command spa/command_batch
#    2024-05-13 17:27:25  temp_cmd_t      spa/command
#    2024-05-13 17:27:25  temp_cmd_tpl    {CMD:0,VALUE:{{ value|int }},XTIME:0,INTERVAL:0}
#    2024-05-13 17:27:25  temp_stat_t    spa/message
#    2024-05-13 17:27:25  temp_stat_tpl  {{ value_json.TGTF }}
#    2024-05-13 17:27:25  temp_unit      F
#    2024-05-13 17:27:25  uniq_id        climate.spa_climate7041072
#    2024-05-13 17:27:13  unit_of_meas    °C
#    2024-05-13 17:27:20  val_tpl        {{ value_json.GOD }}
#
setstate MQTT2_spa 1:1\
2:0\
3:0\
4:0\
29 °C
setstate MQTT2_spa 2024-05-13 22:19:16 AIR 0
setstate MQTT2_spa 2024-05-13 22:19:17 AIRTIME 5868
setstate MQTT2_spa 2024-05-13 22:19:16 AMB 40
setstate MQTT2_spa 2024-05-13 22:19:16 AMBC 40
setstate MQTT2_spa 2024-05-13 22:19:16 AMBF 104
setstate MQTT2_spa 2024-05-13 22:19:16 BRT 6
setstate MQTT2_spa 2024-05-13 22:19:16 CH1 32
setstate MQTT2_spa 2024-05-13 22:19:16 CH2 50
setstate MQTT2_spa 2024-05-13 22:19:16 CH3 57
setstate MQTT2_spa 2024-05-13 22:19:17 CLINT 14
setstate MQTT2_spa 2024-05-13 22:19:17 CLTIME 1715250060
setstate MQTT2_spa 2024-05-13 22:19:17 CONTENT OTHER
setstate MQTT2_spa 2024-05-13 22:19:17 COST 11.15837669
setstate MQTT2_spa 2024-05-13 22:19:17 DBG  192 1 254 183 254 223 254 1 255 247 255 good pkt:0
setstate MQTT2_spa 2024-05-13 22:19:16 ERR 0
setstate MQTT2_spa 2024-05-13 22:19:17 FINT 30
setstate MQTT2_spa 2024-05-13 22:19:16 FLT 1
setstate MQTT2_spa 2024-05-13 22:19:17 FTIME 1715250056
setstate MQTT2_spa 2024-05-13 22:19:17 FW 2024-04-27-001
setstate MQTT2_spa 2024-05-13 22:19:16 GOD 0
setstate MQTT2_spa 2024-05-13 22:19:16 GRN 0
setstate MQTT2_spa 2024-05-13 22:19:17 HASGOD false
setstate MQTT2_spa 2024-05-13 22:19:17 HASJETS false
setstate MQTT2_spa 2024-05-13 22:19:17 HEATINGTIME 73570
setstate MQTT2_spa 2024-05-13 22:19:16 HJT 0
setstate MQTT2_spa 2024-05-13 22:13:43 IODev MQTT2_FHEM_Server
setstate MQTT2_spa 2024-05-13 22:19:17 IP 192.168.2.150
setstate MQTT2_spa 2024-05-13 22:19:17 JETTIME 0
setstate MQTT2_spa 2024-05-13 22:19:17 KWH 41.3273201
setstate MQTT2_spa 2024-05-13 22:19:17 KWHD 41.33725281
setstate MQTT2_spa 2024-05-13 22:19:16 LCK 0
setstate MQTT2_spa 2024-05-13 17:26:32 MAC_Address CC:50:E3:6B:70:30
setstate MQTT2_spa 2024-05-13 22:19:17 MODEL MIAMI2021
setstate MQTT2_spa 2024-05-13 22:19:17 MQTT 0
setstate MQTT2_spa 2024-05-13 17:26:32 MQTT_Connect_Count 9
setstate MQTT2_spa 2024-05-13 22:19:17 PUMPTIME 89760
setstate MQTT2_spa 2024-05-13 22:19:16 PWR 1
setstate MQTT2_spa 2024-05-13 22:19:16 RED 0
setstate MQTT2_spa 2024-05-13 22:19:17 RS Not ready
setstate MQTT2_spa 2024-05-13 22:19:17 RSSI -66
setstate MQTT2_spa 2024-05-13 22:19:17 SSID GartenAP
setstate MQTT2_spa 2024-05-13 17:26:31 Status Alive
setstate MQTT2_spa 2024-05-13 22:19:17 T2R 5.510149956
setstate MQTT2_spa 2024-05-13 22:19:16 TGT 39
setstate MQTT2_spa 2024-05-13 22:19:16 TGTC 39
setstate MQTT2_spa 2024-05-13 22:19:16 TGTF 102
setstate MQTT2_spa 2024-05-13 22:19:17 TIME 1715631556
setstate MQTT2_spa 2024-05-13 22:19:16 TMP 29
setstate MQTT2_spa 2024-05-13 22:19:16 TMPC 29
setstate MQTT2_spa 2024-05-13 22:19:16 TMPF 84
setstate MQTT2_spa 2024-05-13 22:19:16 UNT 1
setstate MQTT2_spa 2024-05-13 22:19:17 UPTIME 355285
setstate MQTT2_spa 2024-05-13 22:19:16 VTM 29.98999977
setstate MQTT2_spa 2024-05-13 22:19:16 VTMC 29.98999977
setstate MQTT2_spa 2024-05-13 22:19:16 VTMF 85.98200226
setstate MQTT2_spa 2024-05-13 22:19:17 WATT 42
setstate MQTT2_spa 2024-05-13 17:27:25 act_t spa/message
setstate MQTT2_spa 2024-05-13 17:27:25 act_tpl {% if value_json.RED == 1 %}heating{% elif value_json.GRN == 1 %}idle{% elif value_json.FLT == 1 %}fan{% else %}off{% endif %}
setstate MQTT2_spa 2024-05-13 17:27:20 assumed_state 0
setstate MQTT2_spa 2024-05-13 17:27:25 avty_t spa/Status
setstate MQTT2_spa 2024-05-13 17:26:33 button NOBTN
setstate MQTT2_spa 2024-05-13 17:27:23 cmd_t spa/command
setstate MQTT2_spa 2024-05-13 17:26:38 cmd_tpl {CMD:12,VALUE:{{ value | int }},XTIME:0,INTERVAL:0}
setstate MQTT2_spa 2024-05-13 17:27:25 curr_temp_t spa/message
setstate MQTT2_spa 2024-05-13 17:27:25 curr_temp_tpl {{ value_json.TMPF }}
setstate MQTT2_spa 2024-05-13 17:27:23 dev_cla restart
setstate MQTT2_spa 2024-05-13 17:27:25 dev_configuration_url http://192.168.2.150
setstate MQTT2_spa 2024-05-13 17:27:25 dev_connections_1_1 mac
setstate MQTT2_spa 2024-05-13 17:27:25 dev_connections_1_2 CC:50:E3:6B:70:30
setstate MQTT2_spa 2024-05-13 17:27:25 dev_identifiers 7041072
setstate MQTT2_spa 2024-05-13 17:27:25 dev_manufacturer Visualapproach
setstate MQTT2_spa 2024-05-13 17:27:25 dev_model MIAMI2021
setstate MQTT2_spa 2024-05-13 17:27:25 dev_name spa WiFi controller
setstate MQTT2_spa 2024-05-13 17:27:25 dev_sw_version 2024-04-27-001
setstate MQTT2_spa 2024-05-13 17:27:20 expire_after 700
setstate MQTT2_spa 2024-05-13 17:27:23 icon mdi:restart
setstate MQTT2_spa 2024-05-13 22:19:17 loopfq 3064
setstate MQTT2_spa 2024-05-13 17:26:38 max 8
setstate MQTT2_spa 2024-05-13 17:27:25 max_temp 104
setstate MQTT2_spa 2024-05-13 17:26:38 min 0
setstate MQTT2_spa 2024-05-13 17:27:25 min_temp 68
setstate MQTT2_spa 2024-05-13 17:26:38 mode slider
setstate MQTT2_spa 2024-05-13 17:27:25 mode_cmd_t spa/command_batch
setstate MQTT2_spa 2024-05-13 17:27:25 mode_cmd_tpl [{CMD:3,VALUE:{%if value == "heat" %}1{% else %}0{% endif %},XTIME:0,INTERVAL:0},{CMD:4,VALUE:{%if value == "fan_only" %}1{% elif value == "heat" %}1{% else %}0{% endif %},XTIME:0,INTERVAL:0}]
setstate MQTT2_spa 2024-05-13 17:27:25 mode_stat_t spa/message
setstate MQTT2_spa 2024-05-13 17:27:25 mode_stat_tpl {% if value_json.RED == 1 %}heat{% elif value_json.GRN == 1 %}heat{% else %}off{% endif %}
setstate MQTT2_spa 2024-05-13 17:27:25 modes_1 fan_only
setstate MQTT2_spa 2024-05-13 17:27:25 modes_2 off
setstate MQTT2_spa 2024-05-13 17:27:25 modes_3 heat
setstate MQTT2_spa 2024-05-13 17:27:25 name spa temperature control
setstate MQTT2_spa 2024-05-13 17:27:23 payload_press {CMD:6,VALUE:true,XTIME:0,INTERVAL:0}
setstate MQTT2_spa 2024-05-13 17:27:25 pl_avail Alive
setstate MQTT2_spa 2024-05-13 17:27:25 pl_not_avail Dead
setstate MQTT2_spa 2024-05-13 17:27:20 pl_off {CMD:17,VALUE:false,XTIME:0,INTERVAL:0}
setstate MQTT2_spa 2024-05-13 17:27:20 pl_on {CMD:17,VALUE:true,XTIME:0,INTERVAL:0}
setstate MQTT2_spa 2024-05-13 17:27:25 precision 1
setstate MQTT2_spa 2024-05-13 17:26:32 reboot_reason Power On
setstate MQTT2_spa 2024-05-13 17:26:32 reboot_time 2024-05-11 09:44:01Z
setstate MQTT2_spa 2024-05-13 17:27:20 stat_t spa/message
setstate MQTT2_spa 2024-05-13 22:19:15 state bubbles
setstate MQTT2_spa 2024-05-13 17:26:52 state_class measurement
setstate MQTT2_spa 2024-05-13 17:27:20 state_off 0
setstate MQTT2_spa 2024-05-13 17:27:20 state_on 1
setstate MQTT2_spa 2024-05-13 22:13:43 subscriptions spa/command spa/command_batch
setstate MQTT2_spa 2024-05-13 17:27:25 temp_cmd_t spa/command
setstate MQTT2_spa 2024-05-13 17:27:25 temp_cmd_tpl {CMD:0,VALUE:{{ value|int }},XTIME:0,INTERVAL:0}
setstate MQTT2_spa 2024-05-13 17:27:25 temp_stat_t spa/message
setstate MQTT2_spa 2024-05-13 17:27:25 temp_stat_tpl {{ value_json.TGTF }}
setstate MQTT2_spa 2024-05-13 17:27:25 temp_unit F
setstate MQTT2_spa 2024-05-13 17:27:25 uniq_id climate.spa_climate7041072
setstate MQTT2_spa 2024-05-13 17:27:13 unit_of_meas °C
setstate MQTT2_spa 2024-05-13 17:27:20 val_tpl {{ value_json.GOD }}


Man kann die icons anklicken um den Zustand zu wechseln
Du darfst diesen Dateianhang nicht ansehen.
Was mir noch nicht gefällt ist:
1. Das man 0 und 1 auswählen muss oder halt set spa bubbles 1
Anstatt
set spa bubbles on
2. Das ich 2 Icons für die Heizung habe da es 2 Readings für die Heizung gibt,
"RED" 0 = Heizung aus, oder Soll Temperatur erreicht
"RED" 1 = Heizung an aber noch nicht Soll Temperatur
"GRN" 0 Heizung aus, oder Soll Temperatur noch nicht erreicht
"GRN" 1 Heizung an und Soll Temperatur erreicht
Da hätte ich lieber 1 Icon
Rot aus
Orange an und Soll Temperatur noch nicht erreicht
Grün Soll Temperatur erreicht
3. Das on Off rechts neben den Icons

#12

Automatisierung / Aw: MSwitch_Support

Letzter Beitrag von uwirt - 13 Mai 2024, 22:24:25

Darf ich fragen wie das gemeint ist - Versionsupdate über das Configdevice?

#13

FHEMWEB / Aw: erster Aufruf dauert manch...

Letzter Beitrag von andies - 13 Mai 2024, 21:37:55

Also es liegt definitiv an der Namensauflösung. Gibt es einen Weg das neu einzustellen, ohne alle Cookies zu löschen?

[FHEMApp]

#14

FHEMapp / Aw: FHEMapp4 Breite

Letzter Beitrag von jemu75 - 13 Mai 2024, 21:37:12

Hallo Felix,

das responsive Design von FHEMApp übernimmt die optimale Darstellung.

Folgende kannst du als Orientierung nutzen:
- 3 Panels in der Desktopansicht
- 2 Panels auf kleineren Displays z.B. Tablets,
- 1 Panel auf Smartphones

Je stärker man hier eingreift, umso weniger profitiert man von dieser Technologie. Deshalb die Entscheidung, es in Version 4 nicht zu implementieren.

Ich hoffe auf Dein Verständnis 
Jens

#15

Homematic / Aw: Homematic IP Geräte in CCU...

Letzter Beitrag von zap - 13 Mai 2024, 21:36:25

get ccuConfig ausgeführt?

#16

FHEMapp / Aw: Fehlende Zuordnungen bei m...

Letzter Beitrag von jemu75 - 13 Mai 2024, 21:21:19

Kein Problem 

#17

FHEMapp / Aw: Fehlende Panels

Letzter Beitrag von jemu75 - 13 Mai 2024, 21:18:36

Kann ich den Thread als "gelöst" markieren? Du hattest den ja geschlossen?

#18

Wallboxen / Aw: Modul für Steuerung einer ...

Letzter Beitrag von satprofi - 13 Mai 2024, 21:12:42

Hallo,

habe heute festgestellt, dass ich die Stromstärke des Go-eChargers (Hardwareversion des Go-e: V2, Firmware: 042.0) über FHEM nicht mehr steuern kann. ON/OFF geht. Über die Go-e APP geht das. Ich weiß, dass das schon funktioniert hat und ich habe das häufiger verwendet. Jetzt geht es nicht mehr.

Hat sich da etwas geändert? Muss ich etwas in FHEM ändern?

P:S: GOeCHARCHER Version 0.2.8

Definition:

Code Auswählen Erweitern

defmod Wallbox GoECharger 192.***********
attr Wallbox devStateIcon disabled.*:ev-station@darkgrey not_allowed.*:ev-station@white ready_no_car.*:ev-station@blue charging.*:ev-station@darkorange waiting_for_car.*:ev-station@pink finished.*:ev-station@lime error.*:ev-station@red
attr Wallbox event-on-change-reading .*
attr Wallbox event-on-update-reading state
attr Wallbox eventMap /allow_charging 1:on/ /allow_charging 0:off/
attr Wallbox group Wallbox
attr Wallbox interval 60
attr Wallbox kW_measured_corr_value 1.00
attr Wallbox room Garage
attr Wallbox stateFormat state\
KW_charging_measured kW\
amp_current A\
kWh_charged_last kWh\
kWh_charged_total kWh\
allow_charging
attr Wallbox used_api_keys default
attr Wallbox webCmd on:off

So, ich hoffe, dass ist jetzt etwas besser. Wir können natürlich auch erst noch meine weiteren formellen Fehler ausmerzen, bevor wir uns um das Inhaltliche kümmern.

?payload=ama=

Diesen befehl verwendet? 0.42 benötigt ama statt amp

[Revision 28871: add: contrib/AutomowerConnect/Common.pm,automowerconnect.js for testing]

#19

FHEM Code changes / Revision 28871: add: contrib/A...

Letzter Beitrag von System - 13 Mai 2024, 20:30:52

Revision 28871: add: contrib/AutomowerConnect/Common.pm,automowerconnect.js for testing

add: contrib/AutomowerConnect/Common.pm,automowerconnect.js for testing

Source: Revision 28871: add: contrib/AutomowerConnect/Common.pm,automowerconnect.js for testing

#20

Automatisierung / Aw: Midea Comfee Klimaanlage ü...

Letzter Beitrag von denis.robel - 13 Mai 2024, 20:30:15

Gibt es auch ähnliche Scripts für Midea Geschirrspüler?