Hauptmenü

Neueste Beiträge

#1
Server - Linux / Aw: /opt/fhem übersiedeln
Letzter Beitrag von rallye - 11 Februar 2025, 17:00:59
Ich habe beide Varianten probiert. Sowohl mit Symlink als auch mit mount --bind

Laufenden FHEM mit
sudo systemctl stop fhem gestoppt, Symlink bzw mount bind in der Kommandozeile erstellt und FHEM mit sudo systemctl start fhem wieder gestartet. Ebenso FHEM gestoppt Symlink erstellt bzw mount bind in der fstab eingetragen und rebooted.

In allen Fällen das selbe Ergebnis: FHEM kommt nicht mehr hoch

Zitat von: betateilchen am 11 Februar 2025, 16:51:05Es gibt übrigens auch Debug-Optionen zur Fehlersuche, alles in der Doku beschrieben.
Habe ich nicht gesehen, werd mich aber gleich mal auf die Suche nach der Debug-Option machen und das morgen ausprobieren. Danke für den Hinweis!!!

Gruß Rallye
#2
Home Connect / Aw: HomeConnect V2 released
Letzter Beitrag von Adimarantis - 11 Februar 2025, 17:00:06
Zitat von: isy am 11 Februar 2025, 15:46:07Moin Jörg,
ich prüfe gerade einige "Hänger" in meiner FHEM Installation mit apptime.

Fällt auf das Presence Modul (per MQTT2_OMG_ESP32_BLE) und für jedes meiner Siemens Geräte ist maxDly (24h) über 2000ms
tmr-HomeConnect_Timer HASH(0x7dbd518)  13    12776    9478.17    0.74  2600.98 
tmr-HomeConnect_Timer HASH(0x7df6d00)  28    12776    6807.76    0.53  2600.66   
tmr-HomeConnect_Timer HASH(0x7ddd458)    6    12776    6061.38    0.47  2600.52

Können wir da was verbessern?

VG Helmut
Ich habe mal ein Logging um die Funktion herum gebaut und bei mir ist global mseclog ohnehin immer auf 1.
Die Timerfunktion rennt bei mir in 1-5 msec durch. Es könnte höchstens sein, dass es mal länger dauert, wenn er sich neu mit dem Event Channel verbinden muss. Hier steht der Timeout auf 10s - aber auch das ist ein asynchrones NonblockingGet. Also ohne konkretere Hinweise sehe ich da erstmal keine offensichtlichen Anhaltspunkte.
Ich weiss jetzt nicht wie das gemessen wird. Wenn ichs richtig im Kopf habe, dann passiert ein NonblockingGet in einem geforkten Prozess - da wird aber trotzdem drauf gewartet (blockiert aber eben FHEM main nicht) - wird das evtl. trotzdem als "Hänger" geloggt?


Jörg
#3
Homematic / Aw: Homematic / Homematic IP
Letzter Beitrag von Beta-User - 11 Februar 2025, 16:58:24
Zum einen: wenn du was schon gelesen hast - sag das ausdrücklich! ( Siehe angepinnte Posts im Anfänger-Bereich).

Besser erklären ist imo schwierig. Also nochmal und nochmal lesen!

Meine Kurzfassung:
Alte Homematic-Geräte weiter als CUL_HM, das ganze mit VCCU und einem zusätzlichen Hm-Mod-Rpi-PCB (oder so ähnlich).

Neue Fensterkontakte nicht in HMIP, sondern z.B. in ZigBee (zigbee2mqtt).

#4
Sonstiges / Aw: FHEM-Umzug von SD-Karte au...
Letzter Beitrag von uron - 11 Februar 2025, 16:51:11
Zitat von: Otto123 am 11 Februar 2025, 16:22:55Oder sauber beenden und im debugmodus starten, steht auch oben im Artikel.
Läuft, aber die Meldungen rauschen nur so durch und ich kann trotz Anhalten nichts erkennen
2025.02.11 16:41:26.624 4: http://192.168.2.156/status: HTTP response code 200
2025.02.11 16:41:26.625 5: HttpUtils http://192.168.2.156/status: Got data, length: 841
2025.02.11 16:41:26.625 5: HttpUtils response header:
HTTP/1.1 200 OK
Server: Mongoose/6.18
Connection: close
Content-Type: application/json
Content-Length: 841
2025.02.11 16:41:26.626 4: [Shelly_HttpResponse] incoming STATUS_CALL answer for AussensteckdoseAmWasser, re                                            setting flag 1
2025.02.11 16:41:26.627 4: [Shelly_HttpResponse] AussensteckdoseAmWasser http://192.168.2.156/status returne                                            d data: {"wifi_sta":{"co....
2025.02.11 16:41:26.628 5: [Shelly_HttpResponse] AussensteckdoseAmWasser: standard JSON decoding
2025.02.11 16:41:26.629 5: [Shelly_HttpResponse] AussensteckdoseAmWasser: forwarding JSON-Hash to func: Shel                                            ly_status1G
2025.02.11 16:41:26.629 5: [Shelly_readingsBulkUpdate] writing AussensteckdoseAmWasser network_rssi -72 no t                                            imestamp
2025.02.11 16:41:26.632 5: [Shelly_readingsBulkUpdate] writing AussensteckdoseAmWasser uptime 1825679 no tim                                            estamp
2025.02.11 16:41:26.633 5: [Shelly_firmwarecheck] AussensteckdoseAmWasser: current=20230913-112003/v1.14.0-g                                            cb84623 update=none beta=20231107-162940/v1.14.1-rc1-g0617c15
2025.02.11 16:41:26.633 5: [Shelly_firmwarecheck] AussensteckdoseAmWasser: v1.14.0 - check for beta-version                                              - B
2025.02.11 16:41:26.634 5: Cmd: >deletereading AussensteckdoseAmWasser update_status<
2025.02.11 16:41:26.635 5: [Shelly_status1G] AussensteckdoseAmWasser: Looking for metering values
2025.02.11 16:41:26.636 5: [Shelly_status1G] AussensteckdoseAmWasser has input 0 with state "on"
2025.02.11 16:41:26.637 5: [Shelly_status:1] AussensteckdoseAmWasser: callFn=Shelly_status1G sched=1, helper                                            =0
2025.02.11 16:41:26.644 4: http://192.168.2.169/status: HTTP response code 200
2025.02.11 16:41:26.645 5: HttpUtils http://192.168.2.169/status: Got data, length: 1269
2025.02.11 16:41:26.645 5: HttpUtils response header:
HTTP/1.1 200 OK
Server: Mongoose/6.18
Connection: close
Content-Type: application/json
Content-Length: 1269
2025.02.11 16:41:26.652 5: Cmd: >deletereading RolladenTreppenhausPodest update_status<
2025.02.11 16:41:27.581 5: HttpUtils url=http://192.168.2.165/status NonBlocking via http
2025.02.11 16:41:27.582 4: IP: 192.168.2.165 -> 192.168.2.165
2025.02.11 16:41:27.590 5: HttpUtils request header:
GET /status HTTP/1.0
Host: 192.168.2.165
User-Agent: fhem
Accept-Encoding: gzip,deflate
das wiederholt sich permanent, ist das relevant?

und sudo apt update funktioniert - aber lass diese Baustelle doch erstmal in Ruhe. Starte erstmal dein FHEM wieder  -  Das ist für heute mein Ziel, das Ding soll/muss wieder laufen, ich muss das bis 20:00 Uhr erledigt haben!
#5
Server - Linux / Aw: /opt/fhem übersiedeln
Letzter Beitrag von betateilchen - 11 Februar 2025, 16:51:05
Bauchgefühl: Du hast ein Rechteproblem.

Erste Maßnahme: was passiert, wenn Du versuchst, FHEM manuell von der Kommandozeile zu starten?
Es gibt übrigens auch Debug-Optionen zur Fehlersuche, alles in der Doku beschrieben.
#6
Homematic / Aw: Homematic / Homematic IP
Letzter Beitrag von mfeske - 11 Februar 2025, 16:48:14
Zitat von: Beta-User am 11 Februar 2025, 16:33:06Warum nur pinnen wir manche Threads?
Meine 2ct: nimm für neue Hardware was anderes.
Hallo Beta-User,
Du meinst https://forum.fhem.de/index.php?topic=116424.0 ?
Ja, gelesen, aber nicht verstanden und ich wollte ja von bestehenden Systemen und Erfahrungen profitieren, deshlab fragte ich.
"nimm für neue Hardware was anderes." ? Ich will ja bestehende weiterverwenden :-(
unter https://github.com/jens-maus/RaspberryMatic/wiki/Einleitung#vorraussetzungen Punkt 2 habe ich zum Beispiel nicht gefunden ob ich die HM-CC-RT-DN unter Ip verwenden kann.
Gruß
Micha
#7
Anfängerfragen / Aw: FHEM Installationsverzeich...
Letzter Beitrag von rallye - 11 Februar 2025, 16:40:50
Da passiert leider genau das Selbe wie hier beschrieben (deshalb schließe ich diesen Thread) und wir machen beim anderen weiter.

Danke, Gruß  Rallye
#8
Server - Linux / Aw: /opt/fhem übersiedeln
Letzter Beitrag von rallye - 11 Februar 2025, 16:38:43
Zitat von: betateilchen am 11 Februar 2025, 16:06:20Hast Du den dort gemachten Vorschlag mal ausprobiert?
Danke, ja, hab ich probiert - leider das idente Ergebnis. Irgendetwas scheint die symbolic links und die mount-binds zu "ignorieren". Wie es so etwas gibt ist mir allerdings schleierhaft.

Danke

Gruß Rallye
#9
Homematic / HMInfo tempList und HM-TC-IT-W...
Letzter Beitrag von maxritti - 11 Februar 2025, 16:38:34
Ich bräuchte mal Hilfe, da ich so langsam die Krise bekomme.
Seit längerem habe ich 4 von den HM-TC-IT-WM-W-EU im Einsatz. Lief auch längere Zeit gut und zufriedenstellend.
Aber nunmehr ist es irgendwie im Wohnzimmer (HM_303ABC) kalt und augenscheinlich hängt dies mit den tempList Gedoens zusammen.

Hier mal kurz der IST Zustand.

Ich habe eine Datei myPlan_new.cfg, die wie folgt befüllt ist:

#init
entities:HM_303ABC_Climate
R_P1_0_tempListSat> 5:00 19.0 6:00 21.0 22:00 22.0 24:00 18.0
R_P1_1_tempListSun> 24:00 18.0
R_P1_2_tempListMon> 24:00 18.0
R_P1_3_tempListTue> 24:00 18.0
R_P1_4_tempListWed> 24:00 18.0
R_P1_5_tempListThu> 24:00 18.0
R_P1_6_tempListFri> 24:00 18.0
R_P2_0_tempListSat> 24:00 17.0
R_P2_1_tempListSun> 24:00 17.0
R_P2_2_tempListMon> 24:00 17.0
R_P2_3_tempListTue> 24:00 17.0
R_P2_4_tempListWed> 24:00 17.0
R_P2_5_tempListThu> 24:00 17.0
R_P2_6_tempListFri> 24:00 17.0
R_P3_0_tempListSat> 24:00 17.0
R_P3_1_tempListSun> 24:00 17.0
R_P3_2_tempListMon> 24:00 17.0
R_P3_3_tempListTue> 24:00 17.0
R_P3_4_tempListWed> 24:00 17.0
R_P3_5_tempListThu> 24:00 17.0
R_P3_6_tempListFri> 24:00 17.0
entities:HM_358056_Climate
R_P1_0_tempListSat>06:00 18.0 22:00 20.0 24:00 18.0
R_P1_1_tempListSun>06:00 18.0 22:00 20.0 24:00 18.0
R_P1_2_tempListMon>06:00 18.0 21:00 21.0 24:00 18.0
R_P1_3_tempListTue>06:00 18.0 21:00 21.0 24:00 18.0
R_P1_4_tempListWed>06:00 18.0 21:00 21.0 24:00 18.0
R_P1_5_tempListThu>06:00 18.0 21:00 21.0 24:00 18.0
R_P1_6_tempListFri>06:00 18.0 21:00 21.0 24:00 18.0
R_P2_0_tempListSat>06:00 17.0 22:00 21.0 24:00 17.0
R_P2_1_tempListSun>06:00 17.0 22:00 21.0 24:00 17.0
R_P2_2_tempListMon>06:00 17.0 09:00 21.0 17:00 17.0 22:00 21.0 24:00 17.0
R_P2_3_tempListTue>06:00 17.0 09:00 21.0 17:00 17.0 22:00 21.0 24:00 17.0
R_P2_4_tempListWed>06:00 17.0 09:00 21.0 17:00 17.0 22:00 21.0 24:00 17.0
R_P2_5_tempListThu>06:00 17.0 09:00 21.0 17:00 17.0 22:00 21.0 24:00 17.0
R_P2_6_tempListFri>06:00 17.0 09:00 21.0 17:00 17.0 22:00 21.0 24:00 17.0
R_P3_0_tempListSat>06:00 17.0 22:00 21.0 24:00 17.0
R_P3_1_tempListSun>06:00 17.0 22:00 21.0 24:00 17.0
R_P3_2_tempListMon>06:00 17.0 09:00 21.0 17:00 17.0 22:00 21.0 24:00 17.0
R_P3_3_tempListTue>06:00 17.0 09:00 21.0 17:00 17.0 22:00 21.0 24:00 17.0
R_P3_4_tempListWed>06:00 17.0 09:00 21.0 17:00 17.0 22:00 21.0 24:00 17.0
R_P3_5_tempListThu>06:00 17.0 09:00 21.0 17:00 17.0 22:00 21.0 24:00 17.0
R_P3_6_tempListFri>06:00 17.0 09:00 21.0 17:00 17.0 22:00 21.0 24:00 17.0
entities:HM_61853D_Climate
R_P1_0_tempListSat>05:00 18.0 22:00 24.0 24:00 18.0
R_P1_1_tempListSun>06:00 18.0 22:00 20.0 24:00 18.0
R_P1_2_tempListMon>06:00 18.0 17:00 20.0 24:00 18.0
R_P1_3_tempListTue>06:00 18.0 17:00 20.0 24:00 18.0
R_P1_4_tempListWed>06:00 18.0 17:00 20.0 24:00 18.0
R_P1_5_tempListThu>06:00 18.0 17:00 20.0 24:00 18.0
R_P1_6_tempListFri>06:00 18.0 17:00 20.0 24:00 18.0
R_P2_0_tempListSat>24:00 17.0
R_P2_1_tempListSun>24:00 17.0
R_P2_2_tempListMon>24:00 17.0
R_P2_3_tempListTue>24:00 17.0
R_P2_4_tempListWed>24:00 17.0
R_P2_5_tempListThu>24:00 17.0
R_P2_6_tempListFri>24:00 17.0
R_P3_0_tempListSat>24:00 17.0
R_P3_1_tempListSun>24:00 17.0
R_P3_2_tempListMon>24:00 17.0
R_P3_3_tempListTue>24:00 17.0
R_P3_4_tempListWed>24:00 17.0
R_P3_5_tempListThu>24:00 17.0
R_P3_6_tempListFri>24:00 17.0
entities:HM_618568_Climate
R_P1_0_tempListSat>06:00 18.0 22:00 20.0 24:00 18.0
R_P1_1_tempListSun>06:00 18.0 22:00 20.0 24:00 18.0
R_P1_2_tempListMon>06:00 18.0 20:00 20.0 24:00 18.0
R_P1_3_tempListTue>06:00 18.0 20:00 20.0 24:00 18.0
R_P1_4_tempListWed>06:00 18.0 20:00 20.0 24:00 18.0
R_P1_5_tempListThu>06:00 18.0 20:00 20.0 24:00 18.0
R_P1_6_tempListFri>06:00 18.0 20:00 20.0 24:00 18.0
R_P2_0_tempListSat>24:00 17.0
R_P2_1_tempListSun>24:00 17.0
R_P2_2_tempListMon>24:00 17.0
R_P2_3_tempListTue>24:00 17.0
R_P2_4_tempListWed>24:00 17.0
R_P2_5_tempListThu>24:00 17.0
R_P2_6_tempListFri>24:00 17.0
R_P3_0_tempListSat>24:00 17.0
R_P3_1_tempListSun>24:00 17.0
R_P3_2_tempListMon>24:00 17.0
R_P3_3_tempListTue>24:00 17.0
R_P3_4_tempListWed>24:00 17.0
R_P3_5_tempListThu>24:00 17.0
R_P3_6_tempListFri>24:00 17.0

Wenn ich auf hmInfo nun ein "set hm tempList restore" mache, bekomme ich diese Antwort:

restore: ./FHEM/myPlan_new.cfg:HM_303ABC_Climate for HM_303ABC_Climate
restore: ./FHEM/myPlan_new.cfg:HM_358056_Climate for HM_358056_Climate
restore: ./FHEM/myPlan_new.cfg:HM_61853D_Climate for HM_61853D_Climate
restore: ./FHEM/myPlan_new.cfg:HM_618568_Climate for HM_618568_Climate


Soweit so gut denke ich.

Damit ich nun in die einzelnen Climate Channels der Thermostate die Werte bekomme, muss ich doch bspws. ein set HM_303ABC_Climate getConfig machen und abwarten oder?

Bei dem HM_303ABC_Climate sehe ich bspws auch, dass bei R_P1_tempList ein "verified" erscheint.
Mache ich in FHEM ein Refresh auf den Channel, passen die Listen aber nicht zusammen mit der aus der Config-Datei.

Hier mal ein List des HM_303ABC_Climate

Internals:
   DEF        303ABC02
   FUUID      636ead17-f33f-7b3d-8cea-89c357f264967b7c
   NAME       HM_303ABC_Climate
   NR         299
   NTFY_ORDER 48-HM_303ABC_Climate
   STATE      T: 20.4 desired: 22.0
   TYPE       CUL_HM
   chanNo     02
   device     HM_303ABC
   disableNotifyFn 1
   eventCount 1545
   READINGS:
     2025-02-11 16:27:24   CommandAccepted yes
     2025-02-11 16:32:53   R_P1_0_tempListSat  06:00 17.0 22:00 21.0 24:00 17.0
     2025-02-11 16:32:53   R_P1_1_tempListSun  24:00 18.0
     2025-02-11 16:32:53   R_P1_2_tempListMon  24:00 18.0
     2025-02-11 16:32:53   R_P1_3_tempListTue  24:00 18.0
     2025-02-11 16:32:53   R_P1_4_tempListWed  24:00 18.0
     2025-02-11 16:32:53   R_P1_5_tempListThu  24:00 18.0
     2025-02-11 16:32:53   R_P1_6_tempListFri  24:00 18.0
     2025-02-11 16:32:53   R_P1_tempList_State verified
     2025-02-11 16:32:57   R_P2_0_tempListSat  24:00 17.0
     2025-02-11 16:32:57   R_P2_1_tempListSun  24:00 17.0
     2025-02-11 16:32:57   R_P2_2_tempListMon  24:00 17.0
     2025-02-11 16:32:57   R_P2_3_tempListTue  24:00 17.0
     2025-02-11 16:32:57   R_P2_4_tempListWed  24:00 17.0
     2025-02-11 16:32:57   R_P2_5_tempListThu  24:00 17.0
     2025-02-11 16:32:57   R_P2_6_tempListFri  24:00 17.0
     2025-02-11 16:32:57   R_P2_tempList_State verified
     2025-02-11 16:33:00   R_P3_0_tempListSat  24:00 17.0
     2025-02-11 16:33:00   R_P3_1_tempListSun  24:00 17.0
     2025-02-11 16:33:00   R_P3_2_tempListMon  24:00 17.0
     2025-02-11 16:33:00   R_P3_3_tempListTue  24:00 17.0
     2025-02-11 16:33:00   R_P3_4_tempListWed  24:00 17.0
     2025-02-11 16:33:00   R_P3_5_tempListThu  24:00 17.0
     2025-02-11 16:33:00   R_P3_6_tempListFri  24:00 17.0
     2025-02-11 16:33:00   R_P3_tempList_State verified
     2025-02-11 16:32:49   RegL_01.         00:00 08:00
     2025-02-11 16:32:53   RegL_07.         00:00 01:2A 02:22 03:09 04:3D 05:00 06:00 07:00 08:00 09:87 0A:30 0B:00 0C:00 0D:00 0E:01 0F:04 10:00 11:00 12:09 13:00 14:44 15:48 16:55 17:08 18:45 19:20 1A:45 1B:20 1C:45 1D:20 1E:45 1F:20 20:45 21:20 22:45 23:20 24:45 25:20 26:45 27:20 28:45 29:20 2A:45 2B:20 2C:45 2D:20 2E:49 2F:20 30:55 31:08 32:45 33:20 34:45 35:20 36:45 37:20 38:45 39:20 3A:45 3B:20 3C:45 3D:20 3E:45 3F:20 40:45 41:20 42:45 43:20 44:45 45:20 46:45 47:20 48:49 49:20 4A:54 4B:6C 4C:44 4D:CC 4E:55 4F:08 50:45 51:20 52:45 53:20 54:45 55:20 56:45 57:20 58:45 59:20 5A:45 5B:20 5C:45 5D:20 5E:45 5F:20 60:45 61:20 62:49 63:20 64:54 65:6C 66:44 67:CC 68:55 69:08 6A:45 6B:20 6C:45 6D:20 6E:45 6F:20 70:45 71:20 72:45 73:20 74:45 75:20 76:45 77:20 78:45 79:20 7A:45 7B:20 7C:49 7D:20 7E:54 7F:6C 80:44 81:CC 82:55 83:08 84:45 85:20 86:45 87:20 88:45 89:20 8A:45 8B:20 8C:45 8D:20 8E:45 8F:20 90:45 91:20 92:45 93:20 94:45 95:20 96:49 97:20 98:54 99:6C 9A:44 9B:CC 9C:55 9D:08 9E:45 9F:20 A0:45 A1:20 A2:45 A3:20 A4:45 A5:20 A6:45 A7:20 A8:45 A9:20 AA:45 AB:20 AC:45 AD:20 AE:45 AF:20 B0:49 B1:20 B2:54 B3:6C B4:44 B5:CC B6:55 B7:08 B8:45 B9:20 BA:45 BB:20 BC:45 BD:20 BE:45 BF:20 C0:45 C1:20 C2:45 C3:20 C4:45 C5:20 C6:45 C7:20 C8:45 C9:20 CA:00 CB:00 CC:00 CD:00 CE:00 CF:00
     2025-02-11 16:32:57   RegL_08.         00:00 01:00 02:00 03:00 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:00 0D:00 0E:00 0F:00 10:00 11:00 12:00 13:00 14:45 15:20 16:45 17:20 18:45 19:20 1A:45 1B:20 1C:45 1D:20 1E:45 1F:20 20:45 21:20 22:45 23:20 24:45 25:20 26:45 27:20 28:45 29:20 2A:45 2B:20 2C:45 2D:20 2E:45 2F:20 30:45 31:20 32:45 33:20 34:45 35:20 36:45 37:20 38:45 39:20 3A:45 3B:20 3C:45 3D:20 3E:45 3F:20 40:45 41:20 42:45 43:20 44:45 45:20 46:45 47:20 48:45 49:20 4A:45 4B:20 4C:45 4D:20 4E:45 4F:20 50:45 51:20 52:45 53:20 54:45 55:20 56:45 57:20 58:45 59:20 5A:45 5B:20 5C:45 5D:20 5E:45 5F:20 60:45 61:20 62:45 63:20 64:45 65:20 66:45 67:20 68:45 69:20 6A:45 6B:20 6C:45 6D:20 6E:45 6F:20 70:45 71:20 72:45 73:20 74:45 75:20 76:45 77:20 78:45 79:20 7A:45 7B:20 7C:45 7D:20 7E:45 7F:20 80:45 81:20 82:45 83:20 84:45 85:20 86:45 87:20 88:45 89:20 8A:45 8B:20 8C:45 8D:20 8E:45 8F:20 90:45 91:20 92:45 93:20 94:45 95:20 96:45 97:20 98:45 99:20 9A:45 9B:20 9C:45 9D:20 9E:45 9F:20 A0:45 A1:20 A2:45 A3:20 A4:45 A5:20 A6:45 A7:20 A8:45 A9:20 AA:45 AB:20 AC:45 AD:20 AE:45 AF:20 B0:45 B1:20 B2:45 B3:20 B4:45 B5:20 B6:45 B7:20 B8:45 B9:20 BA:45 BB:20 BC:45 BD:20 BE:45 BF:20 C0:45 C1:20 C2:45 C3:20 C4:45 C5:20 C6:45 C7:20 C8:45 C9:20 CA:00 CB:00 CC:00 CD:00 CE:00 CF:00
     2025-02-11 16:33:00   RegL_09.         00:00 01:00 02:00 03:00 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:00 0D:00 0E:00 0F:00 10:00 11:00 12:00 13:00 14:45 15:20 16:45 17:20 18:45 19:20 1A:45 1B:20 1C:45 1D:20 1E:45 1F:20 20:45 21:20 22:45 23:20 24:45 25:20 26:45 27:20 28:45 29:20 2A:45 2B:20 2C:45 2D:20 2E:45 2F:20 30:45 31:20 32:45 33:20 34:45 35:20 36:45 37:20 38:45 39:20 3A:45 3B:20 3C:45 3D:20 3E:45 3F:20 40:45 41:20 42:45 43:20 44:45 45:20 46:45 47:20 48:45 49:20 4A:45 4B:20 4C:45 4D:20 4E:45 4F:20 50:45 51:20 52:45 53:20 54:45 55:20 56:45 57:20 58:45 59:20 5A:45 5B:20 5C:45 5D:20 5E:45 5F:20 60:45 61:20 62:45 63:20 64:45 65:20 66:45 67:20 68:45 69:20 6A:45 6B:20 6C:45 6D:20 6E:45 6F:20 70:45 71:20 72:45 73:20 74:45 75:20 76:45 77:20 78:45 79:20 7A:45 7B:20 7C:45 7D:20 7E:45 7F:20 80:45 81:20 82:45 83:20 84:45 85:20 86:45 87:20 88:45 89:20 8A:45 8B:20 8C:45 8D:20 8E:45 8F:20 90:45 91:20 92:45 93:20 94:45 95:20 96:45 97:20 98:45 99:20 9A:45 9B:20 9C:45 9D:20 9E:45 9F:20 A0:45 A1:20 A2:45 A3:20 A4:45 A5:20 A6:45 A7:20 A8:45 A9:20 AA:45 AB:20 AC:45 AD:20 AE:45 AF:20 B0:45 B1:20 B2:45 B3:20 B4:45 B5:20 B6:45 B7:20 B8:45 B9:20 BA:45 BB:20 BC:45 BD:20 BE:45 BF:20 C0:45 C1:20 C2:45 C3:20 C4:45 C5:20 C6:45 C7:20 C8:45 C9:20 CA:00 CB:00 CC:00 CD:00 CE:00 CF:00
     2025-02-11 16:31:28   boostTime       -
     2025-02-11 16:34:00   cfgState        TempChk
     2025-02-11 16:31:28   commReporting   off
     2025-02-11 16:33:00   commState       CMDs_done
     2025-02-11 16:31:28   controlMode     auto
     2025-02-11 16:33:49   desired-temp    22.0
     2025-02-11 16:33:49   humidity        42
     2025-02-11 16:33:49   measured-temp   20.4
     2025-02-11 16:27:24   recentStateType ack
     2025-02-11 16:33:49   state           T: 20.4 desired: 22.0
     2025-02-11 16:09:43   trigLast        fhem:80
     2025-02-11 16:31:28   winOpenReporting off
   TEMPLIST:
     Fri:
       0:
         HOUR       24
         MINUTE     00
         TEMP       17.0
       1:
         HOUR       17
         MINUTE     00
         TEMP       20.0
       2:
         HOUR       24
         MINUTE     00
         TEMP       18.0
     Mon:
       0:
         HOUR       24
         MINUTE     00
         TEMP       17.0
       1:
         HOUR       17
         MINUTE     00
         TEMP       20.0
       2:
         HOUR       24
         MINUTE     00
         TEMP       18.0
     Sat:
       0:
         HOUR       24
         MINUTE     00
         TEMP       17.0
       1:
         HOUR       22
         MINUTE     00
         TEMP       20.0
       2:
         HOUR       24
         MINUTE     00
         TEMP       17.0
     Sun:
       0:
         HOUR       24
         MINUTE     00
         TEMP       17.0
       1:
         HOUR       22
         MINUTE     00
         TEMP       20.0
       2:
         HOUR       24
         MINUTE     00
         TEMP       18.0
     Thu:
       0:
         HOUR       24
         MINUTE     00
         TEMP       17.0
       1:
         HOUR       17
         MINUTE     00
         TEMP       20.0
       2:
         HOUR       24
         MINUTE     00
         TEMP       18.0
     Tue:
       0:
         HOUR       24
         MINUTE     00
         TEMP       17.0
       1:
         HOUR       17
         MINUTE     00
         TEMP       20.0
       2:
         HOUR       24
         MINUTE     00
         TEMP       18.0
     Wed:
       0:
         HOUR       24
         MINUTE     00
         TEMP       17.0
       1:
         HOUR       17
         MINUTE     00
         TEMP       20.0
       2:
         HOUR       24
         MINUTE     00
         TEMP       18.0
   helper:
     peerFriend peerRtTc
     peerIDsRaw ,00000000
     peerIDsState complete
     peerOpt    p:thermostat
     regLst     1,7,8,9
     cfgChk:
       idTp00     failed Entries:
R_P1_0_tempListSat mismatch 5:00 19.0 6:00 21.0 22:00 22.0 24:00 18.0 ne 06:00 17.0 22:00 21.0 24:00 17.0 ##
     cmds:
       TmplKey    :no:1739287018.01438
       TmplTs     1739287018.01438
       cmdKey     1:0:0::HM_303ABC:00AD:02:
       cmdLst:
         clear      [({msgErrors}|msgEvents|rssi|attack|trigger|register|oldRegs|readings|all)]
         controlManu (on|off|5.0..30.0;0.5)
         controlMode (auto|manual|boost|day|night)
         controlParty -temp- -startDate- -startTime- -endDate- -endTime-
         desired-temp (on|off|5.0..30.0;0.5)
         getConfig  noArg
         getRegRaw  (List0|List1|List2|List3|List4|List5|List6|List7) [-peerChn-]
         inhibit    [(on|{off})]
         peerBulk   -peer1,peer2,...- [({set}|unset)]
         peerChan   -btnNumber- -actChn- [({single})] [({set}|unset)] [(actor|remote|{both})]
         regBulk    -list-.-peerChn- -addr1:data1- [-addr2:data2-]...
         regSet     [(prep|{exec})] -regName- -value- [-peerChn-]
         sign       [(on|{off})]
         tempListFri [(prep|{exec})] [({p1}|p2|p3)] -HH:MM- -temp- [...]
         tempListMon [(prep|{exec})] [({p1}|p2|p3)] -HH:MM- -temp- [...]
         tempListSat [(prep|{exec})] [({p1}|p2|p3)] -HH:MM- -temp- [...]
         tempListSun [(prep|{exec})] [({p1}|p2|p3)] -HH:MM- -temp- [...]
         tempListThu [(prep|{exec})] [({p1}|p2|p3)] -HH:MM- -temp- [...]
         tempListTmpl [({verify}|restore)] [[-file-:]-templateName-]
         tempListTue [(prep|{exec})] [({p1}|p2|p3)] -HH:MM- -temp- [...]
         tempListWed [(prep|{exec})] [({p1}|p2|p3)] -HH:MM- -temp- [...]
         tempTmplSet -tempTmpl-
         tplDel     -tplDel-
         tplSet_0   -tplChan-
       lst:
         condition  slider,0,1,255
         peer       
         peerOpt   
         tplChan   
         tplDel     
         tplPeer   
       rtrvLst:
         cmdList    [({short}|long)]
         deviceInfo [({short}|long)]
         list       [({normal}|full)]
         param      -param-
         reg        -addr- -list- [-peerChn-]
         regList    noArg
         regTable   noArg
         regVal     -addr- -list- [-peerChn-]
         saveConfig [-filename-]
         tplInfo    noArg
     expert:
       def        0
       det        0
       raw        1
       tpl        0
     peerIDsH:
       00000000   broadcast
     regCollect:
     role:
       chn        1
     shRegR:
       07         00
     shadowReg:
     shadowRegChn:
       RegL_07.   00
       RegL_08.   00
       RegL_09.   00
     tmpl:
Attributes:
   alias      Wohnzimmer_Climate
   model      HM-TC-IT-WM-W-EU
   peerIDs    00000000
   room       Temperatur

In cfgChk sehe ich gerade ein failed Entries. Aber warum?

cfgChk:
       idTp00     failed Entries:
R_P1_0_tempListSat mismatch 5:00 19.0 6:00 21.0 22:00 22.0 24:00 18.0 ne 06:00 17.0 22:00 21.0 24:00 17.0 ##

Ggf sieht jemand auf Anhieb meinen Fehler und kann helfen.
Irgendwie drehe ich mich nämlich seit Stunden im Kreis und es wird nicht warm im Wohnzimmer.
#10
Homematic / Aw: Homematic / Homematic IP
Letzter Beitrag von Beta-User - 11 Februar 2025, 16:33:06
Warum nur pinnen wir manche Threads?

Gelesen?

Meine 2ct: nimm für neue Hardware was anderes.